Increase flow area up to 103% over the stock 2-3/4" boost tubes with Banks' huge 3-1/2" OEM left and right side boost tubes. Stock hot side tube is dented at the factory, bringing it's diameter down to a tiny 2-1/4". Banks boost tubes are 3-1/2" constant diameter mandrel bent with larger radius bends. More air allows for more fuel which means more horsepower. Banks hot and cold side tubes have up to 103% greater flow area than stock tubes. Produced from high-quality aluminized steel, the tubes are mandrel bent and constant diameter. This allows for quicker turbo spool. Better flowing intercooler tubes improve retention of boost pressure (increases density) between turbo, intercooler, and intake resulting in maximum horsepower. Our red powder-coat finish stops before the end of the tubes for better grip ensuring our 4- and 5-ply heavy-duty high-temperature silicone couplers hold tight under high-boost conditions. Spring-loaded constant tension clamps maintain a stronger grip to prevent leaks or blown boots. Looking for the ultimate flow increase? Banks Boost-Tubes are larger than the factory pipe and designed to work with not only the stock elbow but also the new Banks Monster-Ram Gen 2 which will improve airflow, and allow the turbocharger to spool up even faster. Key Features: 3-1/2" constant diameter mandrel bent with larger radius bends. Combine with Banks Monster Ram Gen 2 for maximum power. More air allows for more fuel which means more horsepower. Over 73% larger flow area vs stock (3.5in vs 2.75in) (103% larger if you count the OEM dent). 4- and 5-ply heavy-duty silicone couplers. Spring-loaded constant tension clamps. Greater cooling capacity. Perfect fit and finish. Lower EGTs

• Up to 103% greater flow area vs stock. Spools turbo faster with lower EGTs
• Tube Has 2.375 in. Reduction

This Part Fits:

OEM replacement for left side boost tube (Driver/Cold side) with silicone couplers. 40% greater flow area compared to stock. Better flowing intercooler tubes results in less boost pressure loss allowing for more air and fuel to be delivered to your engine resulting in maximum horsepower. More density maintained from turbo to intake. These boost tubes are designed for serious horsepower. Banks cold side Boost-Tube has 40% greater flow area than stock tubes. Produced from high-quality aluminized steel, our tubes are mandrel bent for constant diameter. This increases performance by allowing quicker turbo spool. Better flowing intercooler tubes improve retention of boost pressure (increases density) between turbo, intercooler, and intake resulting in maximum horsepower. Our powder-coat finish stops before the end of the tubes for better grip ensuring our 4- and 5-ply heavy-duty high-temperature silicone couplers hold tight under high-boost conditions. Spring-loaded constant tension clamps maintain grip to prevent leaks or blown boots. These boost tubes are designed for serious horsepower and are compatible with the stock elbow or new Banks Monster-Ram Gen 2 which will improve airflow, and allow the turbocharger to spool up even fast. Key Features:- Cold Side (Driver Side) Boost-Tube Only- 3.5 inch constant diameter vs Stock 2.73 inch- More density maintained from turbo to intake- Constant diameter tubing for the best flow- Mandrel-bent aluminized steel construction- 4 and 5-ply heavy-duty silicone couplers- 40% greater flow area compared to stock- Spring-loaded constant tension clamps- Increase performance and lower EGTs- Greater cooling capacity- Perfect fit and finish- Combine with Banks Monster-Ram for the most power

• Increase performance and lower EGTs
• Tube Has 2.375 in. Reduction

This Part Fits:

OEM replacements for left and right side boost tubes with silicone couplers. 40% greater flow area compared to stock. Better flowing intercooler tubes results in less boost pressure loss allowing for more air and fuel to be delivered to your engine resulting in maximum horsepower. More density maintained from turbo to intake. These boost tubes are designed for serious horsepower. Banks hot and cold side tubes have 40% greater flow area than stock tubes. Produced from high-quality aluminized steel, our tubes are mandrel bent for constant diameter. This increases performance by allowing quicker turbo spool. Better flowing intercooler tubes improve retention of boost pressure (increases density) between turbo, intercooler, and intake resulting in maximum horsepower. Our powder-coat finish stops before the end of the tubes for better grip ensuring our 4- and 5-ply heavy-duty high-temperature silicone couplers hold tight under high-boost conditions. Spring-loaded constant tension clamps maintain grip to prevent leaks or blown boots. These boost tubes are designed for serious horsepower and are compatible with the stock elbow or new Banks Monster-Ram Gen 2 which will improve airflow, and allow the turbocharger to spool up even fast. Why It's Better. Better flowing intercooler tubes results in less boost pressure loss allowing for more air and fuel to be delivered to your engine resulting in maximum horsepower. Key Features: Complete set of hot and cold side Boost-Tubes, 3.5 inch constant diameter vs Stock 2.73 inch, More density maintained from turbo to intake, Constant diameter tubing for the best flow, Mandrel-bent aluminized steel construction, 4 and 5-ply heavy-duty silicone couplers, 40%, greater flow area compared to stock, Spring-loaded constant tension clamps, Increase performance and lower EGTs, Greater cooling capacity, Perfect fit and finish, Combine with Banks Monster-Ram for the most power

• 40% greater flow area vs stock. Spools turbo faster with lower EGTs
• Tube Has 2.375 in. Reduction

This Part Fits:

Allows your Cummins engine to make consistent power under extreme conditions. Prevents engine derate. Cooler EGTs, improved fuel economy, and better constant-duty power. Flows 48% better than stock. Adds a calculated +27 hp and +51 lb-ft. Includes massive high-flow boost tube upgrade. Superior to Stock: Everything about Banks Intercooler Intercooler System is designed bigger and better. This upgrade kit includes a set of high-flow boost tubes and a Banks designed intercooler solution. The Banks Boost Tubes feature over sized mandrel-bent pipes matched to the increased performance design of the new intercooler. The Banks designed intercooler has a thicker core to improve cooling area and volume, while its large high-efficiency all-aluminum end tanks and wide-open inlet / outlets maintain peek performance. The Banks Intercooler dramatically increases the engines cooling capacity and power potential by balancing a richer fuel mixture with cooler, denser, improved airflow. Result: You get higher continuous power and more power at any exhaust gas temp (EGT), with better fuel economy, and lower EGTs. That's a truckload of benefits! It doesn't get any cooler than Intercooler! Mounting hardware included. Banks is Breaking B.A.D.!Turbos and intercoolers are Density Machines, so when you increase Boost Air Density, BAD is very good for power. After 58 years, the crew at Banks is damn good at making BAD, and the numbers don't lie! When you compare the new Banks Intercooler for the Ram 6.7L to stock and aFe, you can clearly see why Banks is better. The Banks 6.7L Ram intercooler outflows stock 13x better than aFe and flows 2.5x better than aFe! Plus, with 55 percent reduced pressure loss, you're looking at some serious density increases which equal massive power gains. When you compare us to aFe and see that we do it for less, why would you buy anything other than Banks? Banks offers a huge performance advantage and lower price!

• Adds +27 hp and +51 lb-ft. Increased thermal overhead.
• 2 Year Warranty

This Part Fits:

Steady power output even under extreme temperatures. Adds +95% core volume and 69% greater inlet area over stock. High-efficiency custom-machined durable cast end tanks with wide-open inlet and outlet. Includes mandrel-bent high-flow boost tubes - large, high-efficiency all-aluminum end tanks and all necessary hardware. Superior to Stock: Everything about Banks Techni-Cooler Intercooler System is designed bigger and better. This upgrade kit includes a set of high-flow boost tubes and a Banks designed intercooler solution. The Banks Boost Tubes feature over sized mandrel-bent pipes matched to the increased performance design of the new intercooler. The Banks designed intercooler has a thicker core with 95 percent greater volume to improve cooling. It also has large high-efficiency all-aluminum end tanks and wide-open inlet / outlets for a 69 percent greater flow area. The Banks Techni-Cooler dramatically increases the engines cooling capacity and power potential by balancing a richer fuel mixture with cooler, denser, improved airflow. Result: You get higher continuous power and more power at any exhaust gas temp (EGT), with better fuel economy, and lower EGTs. That's a truckload of benefits! It doesn't get any cooler than Techni-Cooler! Mounting hardware included. Key Features: High-efficiency custom-machined durable cast end tanks. Steady power output even under extreme temperatures. Improves Power, Durability and Fuel Economy. Boost Tubes Reduces boost pressure loss. Packs cool dense air into the cylinders. Dramatically increases air density. 69% greater inlet area vs stock. Includes all necessary hardware. Cooler EGTs and greater MPG. Lowers exhaust gas temps. 95% larger core volume. 2-year warranty

• Cooler EGTs, more MPG & constant-duty power
• 2 Year Warranty

This Part Fits:

Allows your Cummins engine to make consistent power under extreme conditions. Prevents engine derate. Cooler EGTs, improved fuel economy, and better constant-duty power. Flows 48% better than stock. Adds a calculated +27 hp and +51 lb-ft. Includes massive high-flow boost tube upgrade. Superior to Stock: Everything about Banks Intercooler Intercooler System is designed bigger and better. This upgrade kit includes a set of high-flow boost tubes and a Banks designed intercooler solution. The Banks Boost Tubes feature over sized mandrel-bent pipes matched to the increased performance design of the new intercooler. The Banks designed intercooler has a thicker core to improve cooling area and volume, while its large high-efficiency all-aluminum end tanks and wide-open inlet / outlets maintain peek performance. The Banks Intercooler dramatically increases the engines cooling capacity and power potential by balancing a richer fuel mixture with cooler, denser, improved airflow. Result: You get higher continuous power and more power at any exhaust gas temp (EGT), with better fuel economy, and lower EGTs. That's a truckload of benefits! It doesn't get any cooler than Intercooler! Mounting hardware included. Banks is Breaking B.A.D.!Turbos and intercoolers are Density Machines, so when you increase Boost Air Density, BAD is very good for power. After 58 years, the crew at Banks is damn good at making BAD, and the numbers don't lie! When you compare the new Banks Intercooler for the Ram 6.7L to stock and aFe, you can clearly see why Banks is better. The Banks 6.7L Ram intercooler outflows stock 13x better than aFe and flows 2.5x better than aFe! Plus, with 55 percent reduced pressure loss, you're looking at some serious density increases which equal massive power gains. When you compare us to aFe and see that we do it for less, why would you buy anything other than Banks? Banks offers a huge performance advantage and lower price!

• Adds +27 hp and +51 lb-ft. Increased thermal overhead.
• 2 Year Warranty

This Part Fits:

Eliminates restrictions, increasing the cooling capacity for massive continuous power. 14% more flow without starving the airflow to the radiator like our competitors! Big aluminum end tanks won't burst like the plastic stock ones. Techni-Cooler dramatically increases the cooling capacity by balancing the richer fuel mixture with greater airflow and cooler, denser air. Denser air has more oxygen, which improves combustion as well as engine efficiency. Result: higher continuous power and more power at any exhaust gas temp (EGT), better fuel economy and lower EGTs. That's a truckload of benefits! Banks Techni-Cooler delivers the maximum reduction in boost air temperature with a minimal loss of boost pressure. It doesn't get any cooler than Techni-Cooler! Banks Intercooler for the 6.4L Power Stroke produces quicker throttle response, higher continuous power at any exhaust gas temperature, better economy and a more reliable rig. It's the best aftermarket improvement you can make, especially if you climb steep hills or do heavy-duty towing. Key Features: Improves Power, Durability & Fuel Economy. Dramatically increases air density. Cooler EGTs, more MPG & constant-duty power. High-efficiency custom-machined durable cast end tanks. Wide-open inlet and outlet. Reduces boost pressure loss. Maximizes Boost Air. Lowers exhaust gas temps. Packs cool, dense air into the cylinders. Lower restriction for superior flow. 2-year Warranty. Big aluminum end tanks won't burst like the plastic stock ones. Quicker throttle response. 14% more flow without starving the airflow to the radiator!

• Improves Power, Durability & Fuel Economy
• 2 Year Warranty

This Part Fits:

Thicker core with 25 percent more flow volume. Two large, sturdy all-aluminum end tanks versus Stock has one plastic end tank. For even better airflow and faster turbos spool-up add the 25936 Boost Tube Upgrade Kit. Everything about Banks Intercooler is bigger, including the core area, which has 25% more flow volume. Increases air density for more continuous power. Stock has one plastic end tank, Techni-Cooler provides two durable, all-aluminum end tanks, which will never melt or burst under high-boost conditions. Large, streamlined end tanks optimize airflow and air density. With a thicker core than stock, Banks Techni-Cooler sports a 25% increase in volume. Techni-Cooler improves cooling for higher continuous power and lower exhaust gas temps. This denser air charge and better fuel burn also provides another critical benefit, improved fuel economy. Key Features: High-efficiency custom-machined durable cast end tanks. Cooler EGTs, more MPG and constant-duty power. Improves Power, Durability and Fuel Economy. Packs cool, dense air into the cylinders. Two large, sturdy all-aluminum end tanks. Thicker core with 25% more flow volume. Lower restriction for superior flow. Dramatically increases air density. Stock has one plastic end tank. Reduces boost pressure loss. Wide-open inlet and outlet. Lowers exhaust gas temps. Maximizes Boost Air. 2-year Warranty

• Improves Power, Durability & Fuel Economy
• 2 Year Warranty

This Part Fits:

Optimizes the boosted air density for higher continuous power and lower exhaust gas temps. Restriction-free for superior flow with 25% larger core area and 34% more volume. Big boost tubes & durable cast end tanks pack cool, dense air into cylinders. Cooler EGTs, more MPG & constant-duty power. It doesn't get any cooler than Techni-Cooler Move over, pipsqueak. The stock intercooler has an inferiority complex. No wonder it's smaller than Techni-Cooler in every aspect: boost tubes. core area, inlet/outlet, even the end tanks. Most competitors use poorly designed sheet metal end tanks and provide inadequate flow volume. Banks cranks up the volume. Banks improves airflow into and out of the intercooler with big mandrel-bent 3 inch boost tubes. Large, rugged, high-efficiency cast end tanks that won't rupture under high-boost conditions. A huge inlet and outlet. And a 25% larger core area with a whopping 34% improvement in volume The king of cool. Removing restrictions and improving airflow lowers boost air temps. This increases the density and oxygen content of air entering the engine, which amplifies power, lowers exhaust gas temps (EGTs) and improves fuel economy. When EGTs are tamed, the tuner doesn't need to limit fuel delivery. So you get higher continuous, useable power and more power at any EGT. Very cool! Everything about Banks Intercooler is bigger, it doesn't get any cooler than Banks Intercooler. Key Features: Optimizes air pressure and distribution going into the intake manifold. High-efficiency custom-machined durable cast end tanks. Raises boost without increasing turbine drive pressure. Cooler EGTs, more MPG & constant-duty power. Improves flow of oxygen-rich air into cylinders 25% thicker core with 34% more volume. Improves Power, Durability & Fuel Economy. Packs cool, dense air into the cylinders. Accommodates stock mounting points. Lower restriction for superior flow. 3 inch mandrel-bent boost tubes. 2-year Warranty

• Improves Power, Durability & Fuel Economy
• 2 Year Warranty

This Part Fits:

Eliminates restrictions, dramatically increasing the cooling capacity for massive continuous power. Big aluminum end tanks won't burst like stock, with a thicker core for a 21% improvement in volume. Includes mandrel-bent 3.5 inch high-flow boost tubes and super-flow High-Ram intake manifold for maximum performance. Superior to Stock: Everything about Banks Techni-Cooler Intercooler System is designed bigger and better. This upgrade kit includes a set of 3.5 inch high-flow boost tubes and a Banks designed intercooler solution. The Banks Boost Tubes feature over sized mandrel-bent pipes matched to the increased performance design of the new intercooler. The Banks designed intercooler has a 19 percent thicker core with 21 percent greater volume to improve cooling. It also has large high-efficiency all-aluminum end tanks and wide-open inlet / outlets for a 69 percent greater flow area. Lastly to complete the kit, our Banks High-Ram Intake Elbow is also included. The Banks Techni-Cooler dramatically increases the engines cooling capacity and power potential by balancing a richer fuel mixture with cooler, denser, improved airflow. Result: You get higher continuous power and more power at any exhaust gas temp (EGT), with better fuel economy, and lower EGTs. That's a truckload of benefits! It doesn't get any cooler than Techni-Cooler! Mounting hardware included. Key Features: - High-efficiency custom-machined durable cast end tanks- Steady power output even under extreme temperatures- Improves Power, Durability and Fuel Economy- 3.5in Boost Tubes Reduces boost pressure loss- Packs cool dense air into the cylinders- Dramatically increases air density- 19% thicker core area vs stock- Includes High-Ram Intake Elbow- Includes all necessary hardware- Cooler EGTs and greater MPG- Lowers exhaust gas temps- 21% larger core volume- 2-year warranty

• Improves Power, Durability & Fuel Economy
• 2 Year Warranty

This Part Fits:

Banks huge 3-inch boost tube. Stock tube is smaller diameter with tighter bends which hurts flow. Banks boost tube is 3-inch constant diameter mandrel-bent Aluminized Steel with larger radius bends. More air allows for more fuel which means more horsepower. Banks boost tube is larger than the factory pipe and designed to work with the stock elbow and intercooler to improve airflow, and allow the turbocharger to spool up faster. Banks cold side tube has 60% greater flow area than stock tube. Produced from high-quality aluminized steel, the tube is mandrel-bent and constant diameter. This allows for quicker turbo spool. Better flowing intercooler tube improves retention of boost pressure (increases density) between turbo, intercooler, and intake resulting in maximum horsepower. Our red powder-coat finish stops before the end of the tube for better grip ensuring our 4- and 5-ply heavy-duty high-temperature silicone couplers hold tight under high-boost conditions. Spring-loaded constant tension clamps maintain a stronger grip to prevent leaks or blown boots. Key Features: Works with stock intercooler or aftermarket intercooler with stock inlet and outlet size and location. 60% increase in size and flow over stock (3.0 in vs 2.375 in). Allow the turbo charger to spool up faster. Mandrel-bent aluminized steel construction. Constant diameter tubing for the best flow. 4- and 5-ply heavy-duty silicone couplers. Spring-loaded constant tension clamp. Greater cooling capacity. Perfect fit and finish. Improves airflow. Driver side tube. Lower EGTs

• Increases flow area up to 60% over stock. Spools turbo faster with lower EGTs
• Tube Has 2.375 in. Reduction

This Part Fits:

Before Banks engineers design; build and test power systems; they first examine stock vehicles to see where components choke airflow; create backpressure; raise EGTs; and compromise fuel delivery; Banks then gives back the power; durability and engine efficiency the factory left on the table. The ultimate system for ferocious towing power and durability. Includes lifetime Banks Ram-Air filter and service kit; Techni-Cooler intercooler assembly; OttoMind Diesel Tuner; BigHead wastegate actuator; polished stainless Straight through Monster muffler with exclusive expansion chamber; stainless 4 in. Monster exhaust with constant diameter head pipe assembly; intermediate pipe and tailpipe; 5 in. polished stainless double wall tailpipe tip; and electronic dynafact pyrometer and boost gauge assembly. Lifetime LTD. Warranty.

• Improves turbo performance at higher boost levels
• 2 Year Warranty

This Part Fits:

Under high-boost conditions, the stock actuator's weak spring allows the wastegate to blow open, limiting midrange torque. Bleed orifices (also known as "boost foolers") just make it worse. Only Banks solves this problem by replacing the boost actuator. BigHead holds the wastegate closed for quicker boost, then controls the opening to maintain peak boost for superior acceleration and mid-range pulling power. Power NOW! When turbo exhaust backpressure increases, the stock actuator prematurely blows off the seat, softening boost in the midrange and killing torque. With twice the diaphragm area and spring pressure of the stock wastegate, Banks BigHead Wastegate Actuator keeps the valve seated longer and achieves a higher peak boost, sooner. At peak, BigHead opens the wastegate and holds its position, for precise boost control that gives you crisp acceleration and more mid-range pulling power. Key Features: Quick, Controlled Boost. Produces massive torque right from idle. Doubles stock's diaphragm area & spring pressure. Keeps valve seated longer achieving higher peak boost, sooner. Crisp acceleration and more mid-range pulling power.

• For higher peak boost, sooner
• More Mid Range Muscle

This Part Fits:

Under high-boost conditions, the stock actuator's weak spring allows the wastegate to blow open, limiting midrange torque. Bleed orifices (also known as "boost foolers") just make it worse. Only Banks solves this problem by replacing the boost actuator. BigHead holds the wastegate closed for quicker boost, then controls the opening to maintain peak boost for superior acceleration and mid-range pulling power. Power Now! When turbo exhaust backpressure increases, the stock actuator prematurely blows off the seat, softening boost in the midrange and killing torque. With twice the diaphragm area and spring pressure of the stock wastegate, Banks BigHead Wastegate Actuator keeps the valve seated longer and achieves a higher peak boost, sooner. At peak, BigHead opens the wastegate and holds its position, for precise boost control that gives you crisp acceleration and more mid-range pulling power. For trucks manufactured in 1998. Build date can be found on vehicle information tag driver door jamb. Key Features: Quick, Controlled Boost. Produces massive torque right from idle. Doubles stock's diaphragm area and spring pressure. Keeps the valve seated longer achieving higher peak boost, sooner. Crisp acceleration and more mid-range pulling power. Fits Ford 7.3L (1999-1999.5) manufactured in 1998

• For higher peak boost, sooner
• More Mid Range Muscle

This Part Fits:

Under high-boost conditions, the stock actuator's weak spring allows the wastegate to blow open, limiting midrange torque. Bleed orifices (also known as "boost foolers") just make it worse. Only Banks solves this problem by replacing the boost actuator. BigHead holds the wastegate closed for quicker boost, then controls the opening to maintain peak boost for superior acceleration and mid-range pulling power. BigHead Wastegate Actuator Kit for use with 2001-2004 Chevy 6.6L. Power Now! When turbo exhaust backpressure increases, the stock actuator prematurely blows off the seat, softening boost in the midrange and killing torque. With twice the diaphragm area and spring pressure of the stock wastegate, Banks BigHead Wastegate Actuator keeps the valve seated longer and achieves a higher peak boost, sooner. At peak, BigHead opens the wastegate and holds its position, for precise boost control that gives you crisp acceleration and more mid-range pulling power. Key Features: Quick, Controlled Boost. Produces massive torque right from idle. Doubles stock's diaphragm area and spring pressure. Keeps the valve seated longer achieving higher peak boost, sooner. Crisp acceleration and more mid-range pulling power. Fits LB7 engine

• For higher peak boost, sooner
• More Mid Range Muscle

This Part Fits:

Under high-boost conditions, the stock actuator's weak spring allows the wastegate to blow open, limiting midrange torque. Bleed orifices (also known as "boost foolers") just make it worse. Only Banks solves this problem by replacing the boost actuator. BigHead holds the wastegate closed for quicker boost, then controls the opening to maintain peak boost for superior acceleration and mid-range pulling power. Banks exclusive BigHead wastegate actuator prevents wastegate blow-open by keeping the valve seated at higher pressures, increasing mid-range torque and top-end power. Key Features: Quick, Controlled Boost. Produces massive torque right from idle. Doubles stock's diaphragm area and spring pressure. Keeps the valve seated longer achieving higher peak boost, sooner. Crisp acceleration and more mid-range pulling power.

• For higher peak boost, sooner
• More Mid Range Muscle

This Part Fits:

Under high-boost conditions, the stock actuator's weak spring allows the wastegate to blow open, limiting midrange torque. Bleed orifices (also known as "boost foolers") just make it worse. Only Banks solves this problem by replacing the boost actuator. BigHead holds the wastegate closed for quicker boost, then controls the opening to maintain peak boost for superior acceleration and mid-range pulling power. Banks exclusive BigHead wastegate actuator prevents wastegate blow-open by keeping the valve seated at higher pressures, increasing mid-range torque and top-end power. Key Features: Quick, Controlled Boost. Produces massive torque right from idle. Doubles stock's diaphragm area and spring pressure. Keeps the valve seated longer achieving higher peak boost, sooner. Crisp acceleration and more mid-range pulling power

• For higher peak boost, sooner
• More Mid Range Muscle

This Part Fits:

Designed in-house at AWE, our ColdFront™ product line is the solution for consistent and reliable performance for modified vehicles looking for maximum power and security. AWE ® ColdFront™ products include: The AWE ® ColdFront™ Reservoir - part of the ColdFront family - is CNC Machined from 6061 Billet Aluminum and plumbed directly into the heat exchanger coolant system to increase supercharger coolant capacity. The increase in coolant capacity leads to lower coolant temperatures, in turn supporting lower air intake temperatures. To further reduce coolant temperatures, the AWE ® ColdFront™ Reservoir incorporates a true flow through design which acts to reduce coolant temperature as it flows through the unit. The AWE ® ColdFront™ Reservoir features an anodized aluminum cap laser etched with the AWE logo, ensuring that checking the coolant level is a breeze. The AWE ® ColdFront™ Reservoir can be used either in combination with other members of the AWE ® ColdFront™ product line or can be used with the factory heat exchanger.

• Lowers Intake Air Temperatures (IATs) by up to 15F (when used with the rest of the kit)
• Reduces coolant temperatures by a maximum of 24F (when used with the rest of the kit)
• 100% increase in coolant flow rate (when used with the rest of the kit)
• Fits Audi Drive Select cars with addition of AWE Drive Select Cooler
• The proven solution for reducing intake air temperature
• Part of the finest cooling system on the market
• Perfect OEM fitment for easy installation
• Perfect Fitment - Guaranteed
• Designed in house at AWE
• No CEL - Guaranteed

This Part Fits:

Cast aluminum end tanks with internal baffling and a robust bar/plate aluminum core for maximum heat transfer render a 130% increase in frontal surface area and a massive 83% increase in volume over the factory B9 SQ5 intercooler. Regardless if your vehicle is producing higher-than-stock boost levels, or you’re keeping it within factory spec, the ColdFront™ Intercooler solves any potential heat-related issues. By keeping intake air temperature low, and pressure drop at a minimum, engine output remains consistent even when outside temperatures rise. The ColdFront™ will provide the safety margin needed in order for you to push the limit with confidence. There is no cutting required when installing this intercooler. The ColdFront™ Intercooler reuses the factory intercooler hoses and clamps.

• Cast aluminum end tanks with integrated internal baffling for even flow across core
• CAD designed and CFD tested to ensure optimized flow in and out of core
• TIG welded and pressure tested assembly before leaving our facility
• Fits securely behind the stock crash bar, pure bolt-on
• All aluminum construction for maximum heat transfer
• 130% increase in frontal surface area over stock
• Efficient bar and plate core construction
• No effect on OE radiator or A/C systems
• Designed and assembled in-house at AWE
• AWE No Check Engine Light Guarantee
• 83% increase in volume over stock
• Utilizes factory hoses and clamps
• Perfect fitment, guaranteed

This Part Fits:

Presenting the AWE ColdFront™ Intercooler for the Audi B9 A4/A5 2.0T & S4/S5 3.0T. Cast aluminum end tanks with internal baffling and a robust bar/plate aluminum core for maximum heat transfer render a 130% increase in frontal surface area and a massive 83% increase in volume over the factory B9 intercooler. Regardless if your vehicle is producing higher-than-stock boost levels, or you’re keeping it within factory spec, the ColdFront™ Intercooler solves any potential heat-related issues. By keeping intake air temperature low, and pressure drop at a minimum, engine output remains consistent even when outside temperatures rise. The ColdFront™ will provide the safety margin needed in order for you to push the limit with confidence. There is no cutting required when installing this intercooler. The ColdFront™ Intercooler reuses the factory intercooler hoses and clamps. Cool to the core.

• Cast aluminum end tanks with integrated internal baffling for even flow across core
• CAD designed and CFD tested to ensure optimized flow in and out of core
• TIG welded and pressure tested assembly before leaving our facility
• Fits securely behind the stock crash bar, pure bolt-on
• All aluminum construction for maximum heat transfer
• 130% increase in frontal surface area over stock
• Efficient bar and plate core construction
• No effect on OE radiator or A/C systems
• Designed and assembled in-house at AWE
• AWE No Check Engine Light Guarantee
• 83% increase in volume over stock
• Utilizes factory hoses and clamps
• Perfect fitment, guaranteed

This Part Fits:

The AWE ColdFront™ Intercooler Kit leverages generations of Porsche engineering, dating back to the 996. Cast end tanks designed in-house, specially designed cores, power testing, dyno-fueled refinement, and more. Compared to the 991’s stock intercoolers, the AWE ColdFront™ Intercooler Kit's cores are 17% larger (523 cubic inches vs 448 cubic inches). In contrast to the stock cores, the AWE ColdFront™ Intercoolers are a high-flow bar and plate style and are built to our charge row and fin count specifications. These specifications result in 20% reduced air temperatures and 50% improved pressure resistance through the cores. These lowered air temperatures and freer flow allowed the AWE Porsche 991 Turbo S to achieve dyno-verified max gains of 26 HP and 21 lb-ft of torque at the crank when used with the AWE 991 Turbo Performance Exhaust and S-FLO Carbon Intake, and performance software, translating to almost a full second reduction in 60-130 mph acceleration times. AWE designed the biggest cores the 991 TT rear fenders could fit, and as a result of the size difference, the OEM ducts couldn’t be utilized. To feed fresh, cooler air to the intercooler cores, proper flowing ducts are mandatory. The result: straightforward and bolt-in carbon fiber, seamlessly mating to the AWE ColdFront™ Intercoolers. No trimming or cutting necessary -- the AWE Fitment Guarantee remains intact. In addition to the superior core and end tank design, the AWE ColdFront™ Intercooler Kit for the Porsche 991TT also features thick wall 6-ply silicone hoses with gentle curves to prevent bursting under pressure. They are attached to the factory intake and turbos by stainless steel high-force t-bolt clamps, and a molded lip is integrated where the hoses meet the turbos to duplicate the factory locking mechanism. AWE hoses use a Nomex braiding, instead of more common polyester, for superior strength. Please note, the AWE ColdFront™ Intercooler Kit for the Porsche 991TT is for racing use only.

• Dyno-verified max gains of 26 HP and 21 lb-ft of torque at the crank
• Precision cast and machined end tanks for optimized airflow
• Peak 32°F intake air temperature drop compared to stock
• 50% decrease in pressure drop through intercooler cores
• 17% increase in volume over stock
• AWE designed carbon fiber ducts
• Perfect Fitment - Guaranteed
• Engineered in-house at AWE
• Increased fin density

This Part Fits:

And in 2012, AWE introduced carbon fiber shrouds to the mix, producing a lighter, and more aesthetically appealing kit as well. The bulk of the AWE side mount intercooler testing was conducted on S4s with the previously available AWE RSK04 kit installed. This is important to consider, given that as boost rises, so will boost drop due to core restriction. Thus, an intercooler can perform well at relatively low boost levels but can begin to perform worse than stock if the boost drop is high enough to negate any gains seen from temperature drops. Not only did AWE want the Audi 2.7T Performance Intercooler Kit to be clearly superior to the RS4 unit performance, but AWE also ensured that it would require very little modification to the US spec Audi 2.7T models during fitment. The RS4 intercooler units are made to fit the Europe only RS4 and mating them to a US spec 2.7T model requires significant cutting of both the intercoolers and the vehicle itself. The AWE design can be fitted in less than half the time of the typical RS4 kit. This means paying less for labor charges. Since RS4 units were never intended to be used on the US S4 chassis, extensive modifying or tweaking of the areas around the intercoolers is needed to force fitment. The AWE Audi 2.7T Performance Intercooler Kit was designed and built to fit the US S4 chassis, resulting in a much better, cleaner fit with very little modification required. Some key fitment detail differences between the AWE Audi 2.7T Performance Intercooler Kit and the RS4 "kits:" 100% coverage of the core face with AWE Carbon Fiber air ducts. RS4 kits leave gaps around face that lets cooling air escape. No modification needed to the engine belly tray with our design. Cores are secure and supported. Please note, the AWE Audi 2.7T Performance Intercooler Kit is for racing use only. ** NOTE: In order to fit A6 or allroad models, minimal trimming of the bumper and shrouds is necessary.

• Extremely efficient air to air design
• No Check Engine Light – Guaranteed
• AWE designed carbon fiber shrouds
• Perfect Fitment – Guaranteed
• Maximum side mount dimensions

This Part Fits:

If you have a 2019+ Audi 8V RS3 or Mk3 TT RS you'll need this to run the S-FLO intake. The DV Adapter Kit is an adapter machined in-house out of billet 6061 aluminum for 2019+ models. The kit includes the DV adapter, two oil resistant o-rings, two worm-drive clamps, and 8.75" of high temp silicone hose.The AWE 4.5" S-FLO Carbon Intake Suite is for racing use only.

• Includes the DV adapter, two oil resistant o-rings, two worm-drive clamps, and 8.75" of high temp silicone hose
• Required for Audi 8V RS3 and Mk3 TT RS cars that are 2019+
• Machined in-house out of billet 6061 aluminum
• Perfect fitment, guaranteed

This Part Fits:

This Part Fits:

This Part Fits:

This Part Fits:

This Part Fits: