Maintain peak fuel system integrity with the Vibrant Performance HD PowerFilter replacement element. This 40-micron microglass element is designed specifically for the HD PowerFilter housing, providing the fine filtration necessary to protect high-performance injectors and pumps from microscopic contaminants. Its directional construction ensures optimized fuel flow in demanding EFI or carbureted setups.

• Micron Rating: 40 Micron for fine debris capture
• Filter Media: High-efficiency microglass
• Flow Profile: Directional element for optimized fluid dynamics
• System Compatibility: Fits all Vibrant HD PowerFilter housings
• Manufacturer Part Number: 16234

Maintain peak fuel system performance with the Vibrant Performance HD PowerFilter replacement element. Specifically engineered for high-performance fuel systems, this 10-micron microglass element provides the fine filtration necessary to protect fuel injectors and sensitive engine components from microscopic debris.

Designed for use within the Vibrant HD PowerFilter housing, this element serves as a critical post-pump filter. The microglass media is chosen for its superior efficiency and dirt-holding capacity compared to standard stainless mesh, ensuring clean fuel delivery under high-pressure conditions. Regularly replacing your filter element is essential for preventing pressure drops and safeguarding your engine against contamination.

• Manufacturer Part Number: 16232
• Filter Rating: 10 Micron
• Filter Media: Microglass
• Compatibility: Vibrant HD PowerFilter housings
• Application: Fine post-pump fuel filtration

Fits 2003-2004 Ford Mustang SVT Cobra and 10th Anniversary models.

The Snow Performance Xtreme Series Multi-Pump Fuel Hat replaces the restrictive factory fuel bucket with a high-flow, billet aluminum manifold designed for high-horsepower builds. Engineered, CNC-machined, and assembled in the USA from 6061 billet aluminum, this fuel hat features internal passages that eliminate the need for unreliable T-fittings, rubber hoses, or plastic lines that often fail or deteriorate over time. The assembly is finished in black anodizing for superior corrosion resistance, ensuring full compatibility with E85, ethanol blends, and pump gasoline.

This fuel hat is designed for return-style fuel systems only and features oversized female 10AN ORB feed and 8AN ORB return ports for maximum volume. The CNC-machined body secures up to three genuine TI Automotive (Walbro) fuel pumps (sold separately) using Viton chemical-resistant O-rings for a leak-free seal. This unit retains essential factory tank functions, including the OE fuel level sending unit mounting, EVAP system, and filler neck.

• Manufacturer Part Number: SNF-52600X
• Construction: CNC-machined 6061 billet aluminum
• Finish: Black anodized for E85/ethanol compatibility
• Ports: 10AN ORB feed and 8AN ORB return
• Installation: Direct replacement for factory fuel hat/bucket
• Compatibility: Return-style systems only; accommodates 2 or 3 pumps
• Includes: Wiring harnesses for pumps and fuel level sending unit
• Note: Does NOT include fuel level sending unit or fittings

Fits 2003-2004 Ford Mustang SVT Cobra and 10th Anniversary models.

The Snow Performance Race Series Multi-Pump Fuel Hat (SNF-52600R) provides a high-output fuel delivery solution for the 03-04 Mustang Cobra. This billet 6061 aluminum manifold replaces the factory fuel bucket, eliminating the need for unreliable T-fittings, rubber hoses, and hose clamps that are prone to deterioration and leaks. CNC-machined for precision, this assembly features Viton chemical-resistant O-rings and a black anodized finish for maximum corrosion resistance and full compatibility with E85, ethanol blends, and gasoline.

Designed specifically for return-style fuel systems, this hat retains critical factory functionality, including the OE fuel level sending unit, EVAP system, filler neck, and the fuel transfer pump for saddle-style tanks. The manifold features female 10AN ORB feed and 8AN ORB return ports for high-flow capacity.

• CNC-machined from 6061 billet aluminum with a black anodized finish
• Eliminates internal hose clamps and plastic lines for improved reliability
• Retains factory EVAP, filler neck, and fuel transfer functionality
• Configurable for 2 or 3 TI Automotive (Walbro) 450LPH/470LPH pumps
• Ports: 10AN ORB (Feed) / 8AN ORB (Return)
• Includes wiring harnesses for pumps and fuel level sending unit
• Engineered and built in the USA

Note: Designed for return-style applications only. Does not include fuel level sending unit or fittings. Requires genuine TI Automotive fuel pumps (sold separately).

Fits 2003-2004 Ford Mustang SVT Cobra and 10th Anniversary models.

The Snow Performance SNF-52600H Multi-Pump Fuel Hat is a precision-engineered solution for high-horsepower 03-04 Cobra applications requiring significant fuel volume. Unlike multi-pump upgrades that rely on unreliable T-fittings and hose clamps, this assembly features a CNC-machined 6061 billet aluminum manifold with internal flow passages. This design eliminates the risk of deteriorating rubber or plastic lines inside the tank, ensuring a secure, leak-free fuel delivery system.

The assembly is finished in black anodizing for maximum corrosion resistance, making it fully compatible with E85, 100% Ethanol, and standard pump gasoline. It is designed specifically for return-style fuel systems and replaces the factory fuel bucket while retaining essential OE features, including the EVAP system, filler neck, and fuel level sending unit mounting points.

• CNC machined from 6061 billet aluminum with a black anodized finish
• Compatible with E85, E98, and pump gasoline
• 10AN ORB feed port and 8AN ORB return port
• Viton chemical-resistant O-rings for superior sealing
• Supports genuine TI Automotive (Walbro) 450LPH or 470LPH pumps
• Includes wiring harnesses for pumps and fuel level sending unit
• Retains factory EVAP and fuel transfer pump functionality
• Manufacturer Part Number: SNF-52600H

Note: Designed for return-style fuel systems only. Not for use in returnless applications. Does not include fuel level sending unit or AN fittings.

Fits 2003-2004 Ford Mustang SVT Cobra and 10th Anniversary models.

The Snow Performance SNF-52600 Dual Pump Fuel Hat provides a high-output, reliable fuel delivery solution for Terminator Cobras. This assembly replaces the factory fuel hat and bucket with a precision CNC-machined 6061 billet aluminum manifold, eliminating the need for unreliable T-fittings, rubber hoses, and hose clamps that often fail in multi-pump configurations. The design features internal CNC-machined passages to ensure maximum flow and a leak-free fit with Viton chemical-resistant O-rings.

• Durable Construction: CNC-machined from 6061 billet aluminum and finished in black anodizing for superior corrosion resistance and compatibility with E85 and ethanol-blended fuels.
• High-Flow Specifications: Equipped with female 10AN ORB feed and 8AN ORB return ports for efficient fuel transfer in high-horsepower applications.
• Factory Integration: Designed to retain essential OE components, including the fuel level sending unit, EVAP system, filler neck, and fuel transfer pump functionality.
• Premium Pumps: Configured for dual TI Automotive (Walbro) fuel pumps. These are intended for return-style fuel systems only and are compatible with 100% gasoline through E98 ethanol.

Specifications:
• MPN: SNF-52600
• Material: 6061 Billet Aluminum
• Ports: 10AN ORB (Feed), 8AN ORB (Return)
• Compatibility: Return-style fuel systems only

Note: Fuel level sending unit and fittings are sold separately. Includes wiring harnesses for pumps and sending unit.

Fits 1999-2004 Ford Mustang Base, GT, GT Bullitt, and Mach 1.

The Snow Performance Xtreme Multi-Pump Fuel Hat (SNF-52599X) is a high-output fueling solution designed to replace restrictive factory fuel buckets and eliminate the need for unreliable hose clamps and T-fittings in multi-pump setups. Precision CNC-machined in the USA from 6061 billet aluminum and finished in black anodize for superior corrosion resistance, this manifold is fully compatible with E85, ethanol blends, and pump gasoline.

Engineered for return-style fuel systems, the Xtreme fuel hat supports configurations of 2 or 3 genuine TI Automotive (Walbro) fuel pumps (450LPH or 470LPH). It features internal CNC-machined passages and Viton chemical-resistant O-rings for a secure, leak-free seal. This assembly integrates with your Mustang's factory tank components, retaining the EVAP system, filler neck, and fuel transfer functionality for saddle-style tanks.

• Material: 6061 Billet Aluminum with Black Anodized Finish
• Port Sizes: 10AN ORB Feed / 8AN ORB Return
• Fuel Compatibility: 100% Gasoline, E10, E85, E98
• System Type: Return-style only (not for returnless applications)
• Pump Compatibility: Supports up to 3 genuine TI Automotive (Walbro) pumps
• Retains: OE fuel level sending unit and EVAP system functionality
• Manufacturer Part Number: SNF-52599X

Note: This assembly does not include fittings or the fuel level sending unit. Wiring harnesses for the pumps and fuel level sending unit are included.

Fits 1999-2004 Ford Mustang Base, GT, Bullitt, and Mach 1 models.

The Snow Performance Triple Pump Race Fuel Hat is a high-output fuel delivery solution engineered for serious performance applications. This assembly completely replaces the factory fuel bucket with a precision CNC-machined 6061 billet aluminum manifold, eliminating the need for unreliable T-fittings, rubber hoses, and plastic lines that deteriorate over time. The integrated manifold design ensures secure pump mounting and a leak-free fit using chemical-resistant Viton O-rings.

Designed for durability and corrosion resistance, this hat features a black anodized finish, making it fully compatible with E85, E98, and other ethanol-based fuels. While upgrading your flow capacity, this unit retains essential factory tank features including the EVAP system, filler neck, and saddle-style tank fuel transfer pump functionality. Note: This assembly is designed for return-style fuel systems only and does not support returnless applications.

• Manufacturer Part Number: SNF-52599R
• Material: CNC-machined 6061 billet aluminum with black anodized finish
• Ports: 10AN ORB feed and 8AN ORB return ports
• Pump Type: Genuine TI Automotive (Walbro) fuel pumps
• Compatibility: 100% Gasoline, 100% Ethanol, and all blends (E10, E85, E98)
• Includes: Wiring harnesses for pumps and fuel level sending unit
• Requirement: Return-style fuel system installation only
• Note: Does NOT include fuel level sending unit or fittings

Fits 1999-2004 Ford Mustang Base, GT, GT Bullitt, and Mach 1 models.

The Snow Performance SNF-52599H Multi-Pump Fuel Hat provides a high-output fueling solution for high-horsepower Mustang builds. This unit completely replaces the factory fuel bucket with a CNC-machined 6061 billet aluminum manifold, engineered to accommodate up to three fuel pumps. Unlike traditional multi-pump setups that rely on prone-to-failure T-fittings and rubber hoses, this assembly features internal CNC-machined passages that eliminate the need for hose clamps and internal plastic lines that can deteriorate over time.

Built in the USA, this fuel hat is finished in black anodizing for superior corrosion resistance and full compatibility with E85, E98, and 100% ethanol. The design retains critical factory tank features, including the OE fuel level sending unit, EVAP system, and filler neck functionality. For Mustangs equipped with saddle-style tanks, this assembly also maintains the factory fuel transfer pump operation. The hat features a 10AN ORB feed port and an 8AN ORB return port, specifically designed for return-style fuel system conversions.

• Manufacturer Part Number: SNF-52599H
• Material: 6061 Billet Aluminum with Viton O-rings
• Finish: Black Anodized (E85/Ethanol compatible)
• Ports: 10AN ORB (Feed) / 8AN ORB (Return)
• Compatibility: Designed for genuine TI Automotive (Walbro) 450LPH or 470LPH pumps
• System Type: Return-style only (not for returnless applications)
• Included: Wiring harnesses for fuel pumps and fuel level sending unit
• Note: Does NOT include fuel level sending unit or fuel line fittings

Fits select 2005-2023 Chrysler 300 and Dodge Charger models. This Snow Performance Multi-Pump Fuel Hat provides a high-output fuel solution that eliminates the reliability issues of multi-pump setups using T-fittings and rubber hoses. Engineered as a direct replacement for the factory fuel bucket, this billet manifold features precision CNC-machined internal passages to deliver high-volume fuel flow without the risk of deteriorating lines or loose hose clamps.

• Precision Construction: CNC-machined in the USA from 6061 billet aluminum with a black anodized finish for maximum corrosion resistance and compatibility with Gasoline, E85, and E98.
• Leak-Free Design: Features Viton chemical-resistant O-rings and internal manifolds that hold pumps securely, ensuring a perfect seal under high pressure.
• System Retention: Designed to maintain factory tank features including the OE fuel level sending unit, EVAP system, filler neck, and saddle-tank fuel transfer pump functionality.
• Port Specifications: Equipped with female 10AN ORB feed and 8AN ORB return ports (90-degree swivel adapter fittings sold separately).
• Pump Compatibility: Configured for dual TI Automotive (Walbro) 450LPH or 470LPH pumps. Designed for return-style fuel systems only.

Note: Fuel level sending unit and fittings are not included. Includes required wiring harnesses for pumps and sending unit. Manufacturer Part Number: SNF-52410.

Fits select 1994-2002 Nissan S14, S15, R33, and R34 chassis models.

The Radium Engineering Fuel Hanger Plumbing Kit is a comprehensive solution designed specifically to complement Radium in-tank fuel pump hangers. This kit replaces the restrictive factory fuel lines with high-flow plumbing, ensuring your fuel system can handle the demands of high-performance tuning. By utilizing application-specific brackets and fittings, it provides a clean, professional installation that eliminates the need for custom fabrication.

• Designed for late-model Nissan S-chassis (S14/S15) and R-chassis (R33/R34) vehicles
• Includes a premium fuel filter housing with a reusable stainless steel mesh filter element
• Compatible with all fuel types, including gasoline, E85, and ethanol blends
• Complete kit includes PTFE fuel lines, chassis-specific line brackets, and all required adapter fittings
• Engineered for seamless integration with Radium fuel pump hangers
• Manufacturer Part Number: 20-0702-03

Fits select Nissan S14, S15, R33, and R34 models equipped with a compatible Radium Engineering fuel pump hanger.

The Radium Engineering Fuel Hanger Surge Tank (FHST) Add-on (MPN 20-0701) allows for the conversion of a standard Radium Nissan fuel pump hanger into a fully integrated surge tank system. This kit is a vital solution for high-performance builds where aggressive lateral G-forces or hard acceleration can cause fuel slosh, leading to engine-damaging fuel starvation.

• Function: Replaces the standard collector to maintain a constant volume of fuel around the pump inlets.
• Pump Compatibility: Designed for use with TI Automotive (Walbro) F90000267, F90000274, F90000285, or E5LM brushless fuel pumps.
• Seamless Integration: Bolts directly to existing Radium Nissan hangers without the need for external plumbing or additional fuel lines.
• Manufacturer Part Number: 20-0701

Please note: Fuel pumps are not included with this add-on kit.

The Turbosmart FPR10 is a high-performance fuel pressure regulator engineered for high-horsepower applications requiring high-volume fuel flow. This regulator provides precise 1:1 manifold pressure tracking to ensure stable fuel delivery even under high boost. Machined from billet aluminum with stainless steel internal components, the FPR10 is designed to maintain consistent pressure control and withstand the demands of performance fuel systems.

• Dual -10AN inlet ports and single -10AN return port
• True 1:1 manifold pressure ratio for consistent fuel delivery
• Base pressure adjustable from 30 to 70 PSI
• MIL-Spec anodized black finish for superior corrosion resistance
• 1/8" NPT gauge port for precise pressure monitoring
• Includes stainless steel mounting bracket and vacuum fitting
• Manufacturer Part Number: TS-0404-1042

The Turbosmart FPR8 Sleeper Series Fuel Pressure Regulator (TS-0404-1035) provides high-performance fuel management with a low-profile, stealth aesthetic. Designed for electronic fuel injection systems, this regulator ensures precise fuel rail pressure control using a true 1:1 manifold pressure ratio. The Sleeper series features a signature matte black finish, making it an ideal choice for high-output street cars and track vehicles where a discreet engine bay appearance is preferred.

Constructed with high-flow internals and a durable stainless steel valve seat, the FPR8 is engineered to handle high-volume fuel pumps without experiencing pressure creep. It provides the stability and response time needed for accurate tuning under varying load and boost conditions.

• Manufacturer Part Number: TS-0404-1035
• True 1:1 manifold pressure ratio for consistent fueling
• High-flow internals with stainless steel valve seat for durability
• Low-profile Sleeper series matte black finish
• Integrated 1/8" NPT gauge port for accurate pressure monitoring
• Designed for high-performance EFI applications

The Turbosmart FPR8 Fuel Pressure Regulator delivers precise fuel pressure control for high-performance EFI systems. Designed to manage high flow rates without sacrificing stability, this regulator features -8AN ports for the inlet, outlet, and return to ensure minimal restriction in your fuel loop.

• Series: FPR8
• Port Size: -8AN Inlet, Outlet, and Return
• Finish: Black Anodized
• Compatibility: Suitable for high-flow EFI fuel systems
• Manufacturer Part Number: TS-0404-1032

Constructed for durability and precision, the FPR8 is an essential component for maintaining consistent rail pressure under varying engine loads, making it a trusted choice for street and track applications.

The Turbosmart FPR6 Sleeper Fuel Pressure Regulator (TS-0404-1025) provides precision fuel pressure management for high-performance EFI systems. As part of the Sleeper series, this regulator features a low-profile, black anodized finish designed for builders who want professional-grade fuel control without drawing unnecessary attention in the engine bay.

• Steady Fuel Control: Engineered for a consistent 1:1 manifold pressure ratio, ensuring predictable fuel delivery under all load conditions.
• Premium Construction: CNC-machined from high-grade billet aluminum for maximum durability and resistance to high-pressure environments.
• Sleeper Aesthetics: The stealthy black anodized finish provides superior corrosion resistance while blending seamlessly into your engine's layout.
• Fuel Compatibility: Suitable for use with pump gas, race gas, and alcohol-based fuels including E85 and Methanol.
• MPN: TS-0404-1025

The Turbosmart FPR6 is a performance-grade fuel pressure regulator engineered to provide precise control and consistent fuel delivery for high-demand engines. Designed for both street and track use, this unit is capable of supporting fuel systems in vehicles requiring stable pressure regulation under varying load conditions.

• Features dual -6AN inlet ports and a single -6AN return port for high-flow compatibility.
• Integrated 1/8" NPT gauge port for accurate pressure monitoring and adjustment.
• Constructed from durable billet aluminum with a corrosion-resistant purple anodized finish.
• Compatible with leaded and unleaded gasoline, as well as alcohol-based fuels like E85.
• Includes mounting bracket and vacuum fitting for a complete installation.
• Manufacturer Part Number: TS-0404-1023.

The Turbosmart FPR6 is a high-performance fuel pressure regulator designed for precise, stable fuel delivery in street and track applications. This regulator ensures your fuel system maintains consistent pressure under all load conditions, preventing lean or rich conditions that can affect engine performance.

Machined from billet aluminum and finished with durable black anodizing, the FPR6 series is engineered to handle high-flow fuel systems without pressure creep. It features -6AN inlet and outlet ports, making it a versatile choice for modern fuel system upgrades.

• Manufacturer: Turbosmart
• Model: FPR6
• Part Number: TS-0404-1022
• Port Size: -6AN Inlet and Outlet
• Gauge Port: 1/8" NPT
• Finish: Black Anodized
• Compatibility: Compatible with leaded, unleaded, and alcohol-based fuels

The Turbosmart FPR6 (TS-0404-1021) delivers precise fuel pressure control for high-performance EFI systems. This regulator is engineered to provide consistent fuel delivery and stable pressure regulation under varying load conditions, making it an essential upgrade for street and track vehicles alike. Built from billet aluminum with a durable blue anodized finish, it features a 1:1 manifold pressure ratio to ensure your fuel rail pressure tracks perfectly with boost or vacuum.

• High-grade billet aluminum construction with stainless steel internal components
• Equipped with -6AN inlet, outlet, and return ports for high-flow compatibility
• 1:1 manifold pressure reference ratio for accurate fuel compensation
• Integrated 1/8" NPT gauge port for easy pressure monitoring
• Compatible with leaded, unleaded, and alcohol-based fuels
• Manufacturer Part Number: TS-0404-1021

Maintain precise fuel rail pressure with the Turbosmart Kompact Universal Fuel Pressure Regulator. This regulator is engineered for performance applications where engine bay space is limited, offering a compact footprint without compromising on flow or response. Part of the Sleeper series, it features a discreet black finish to provide a stealthy, professional appearance in the engine bay.

• Compact design allows for mounting in tight spaces where full-sized regulators won't fit.
• Equipped with 1/8in NPT inlet and outlet ports for straightforward plumbing into custom fuel systems.
• Ideal for low-to-mid horsepower builds requiring reliable pressure regulation.
• Sleeper Series black anodized finish resists corrosion while maintaining an understated look.

Technical Specifications:

• Manufacturer Part Number: TS-0404-1015
• Port Type: 1/8in NPT
• Finish: Black (Sleeper Series)
• Fitment: Universal

The Torque Solution Billet Flex Fuel Sensor Bracket (TS-UNI-625) provides a professional, secure mounting solution for GM-style flex fuel sensors. When integrating ethanol sensors into a performance fuel system, proper mounting is essential to prevent vibration-induced component failure and to relieve physical strain on your fuel lines and fittings.

• CNC-machined from high-grade billet aluminum for precise fitment and long-term durability
• Specifically engineered to accommodate GM Flex Fuel Sensors
• Compact footprint allows for versatile mounting options within crowded engine bays
• Eliminates sensor movement and potential leaks from unsecured components
• Manufacturer Part Number: TS-UNI-625

Fits select 2002-2020 Subaru WRX, STI, Forester XT, and Legacy 2.5GT.

The Torque Solution Braided Fuel Line Kit (MPN: TS-SU-6FLK-AM) is designed for enthusiasts seeking a high-performance plumbing solution when installing a -6 Aeromotive Fuel Pressure Regulator (FPR). This kit replaces vulnerable factory rubber lines with robust braided hoses, ensuring your fuel system can handle the demands of increased pressure and heat common in modified EJ-series and FA-series engines.

• Engineered specifically for use with -6 Aeromotive Fuel Pressure Regulators
• Durable braided hose construction resists abrasion and high engine bay temperatures
• Precision-engineered fittings provide a secure, leak-free connection
• Maintains consistent fuel delivery for high-horsepower applications
• Compatible with pump gas and most racing fuels
• Manufacturer Part Number: TS-SU-6FLK-AM

Fits 2002-2014 Subaru WRX and 2007-2018 Subaru STI models.

Torque Solution Top Feed Fuel Rails are engineered to optimize fuel distribution and support high-flow fuel system requirements on performance-oriented EJ engines. These rails replace the restrictive factory components, allowing for more consistent fuel delivery across all cylinders and providing the necessary clearance and fitment for larger aftermarket fuel injectors.

• Durable silver finish for corrosion resistance
• Designed for top feed injector configurations
• High-flow bore diameter to support increased horsepower levels
• Direct replacement for specific 2002-2014 WRX and 2007-2018 STI models
• Manufacturer Part Number: TS-SU-400S.2

Fits select 1990-2003 BMW 3-Series (E36/E46) models including 318i, 323i, 325i, 328i, and 330i variants. This Radium Engineering plumbing kit provides a direct solution for connecting a Radium in-tank fuel pump hanger to the vehicle's fuel system. By utilizing application-specific fittings and high-quality lines, it eliminates the guesswork involved in custom fuel system fabrication.

The kit features a high-flow inline fuel filter equipped with a durable stainless steel element, designed to provide superior filtration without restricting fuel volume—crucial for high-performance engines and aftermarket fuel pumps. This setup ensures that your fuel delivery system is secure, leak-free, and capable of supporting increased demands.

• Designed specifically for use with Radium Engineering BMW E36 and E46 fuel pump hangers
• Includes a high-capacity fuel filter with a reusable stainless steel filter element
• Comprehensive hardware and plumbing components for a clean installation
• Corrosion-resistant materials for long-term reliability in performance applications
• Manufacturer Part Number: 20-1175-03

Fits 2009-2023 Nissan GT-R R35 (VR38DETT).

The Radium Engineering Fuel Rail Plumbing Kit, part number 20-0956-PK, provides a direct-fit solution for integrating Radium VR38DETT fuel rails with the factory Nissan R35 chassis fuel lines. This comprehensive plumbing kit replaces the need for custom-fabricated lines, offering a secure and reliable connection to the original equipment (OE) fuel feed and return system.

Engineered for high-performance applications, the kit includes an adjustable fuel pressure regulator to maintain precise control over the fuel system. Each component is designed for maximum flow and durability, utilizing high-grade AN fittings and specialized hoses to ensure a leak-free installation.

• Manufacturer Part Number: 20-0956-PK
• Bridges Radium fuel rails to factory feed and return lines
• Includes high-flow adjustable fuel pressure regulator
• Complete with all necessary AN fittings and hoses
• Features all hardware required for a bolt-on installation

The Torque Solution Billet Dual Pass Flex Fuel Sensor Bracket (MPN: TS-UNI-637) provides a secure, vibration-resistant mounting solution for your ethanol content sensor. Designed for performance fuel systems, this bracket ensures your sensor remains fixed in place, protecting the electrical connector and fuel line fittings from unnecessary stress or movement.

Precision CNC machined from high-grade 6061 billet aluminum, this bracket is built to withstand the rigors of a high-performance engine bay. Its compact, lightweight design allows for versatile placement in crowded engine compartments, making it an essential component for any custom E85 conversion or flex fuel setup.

• CNC machined 6061 billet aluminum construction
• Designed specifically for dual-pass style flex fuel sensors
• Lightweight and durable mounting solution
• Manufacturer Part Number: TS-UNI-637
• Simple installation for custom fuel system configurations

Fits select 2002-2020 Subaru Forester XT, Impreza WRX, Impreza WRX STI, Legacy GT, and WRX STI.

The Torque Solution Braided Fuel Line Kit is a specialized plumbing solution for Subaru owners integrating a -6 Aeromotive Fuel Pressure Regulator (FPR) and a Flex Fuel sensor into their performance fuel system. This kit eliminates the guesswork of custom line fabrication by providing high-quality braided hoses designed to withstand the pressures and chemical demands of ethanol-blend fuels while ensuring consistent delivery to the rails.

• Specifically engineered for use with -6 Aeromotive FPR and Flex Fuel sensor setups
• Durable braided fuel lines provide superior protection against heat, abrasion, and expansion
• Precision-engineered fittings ensure a secure, leak-free connection
• Simplifies the transition to a high-flow, flex-fuel capable fuel system
• Manufacturer Part Number: TS-SU-6FLK-AM-FF

Ensure reliable lubrication for your turbocharger with the Torque Solution Turbo Oil Feed Line Kit (TS-SU-577). Designed for stock-location EJ-series engines, this kit fits select 2004-2020 Subaru Forester, Impreza, Legacy, and WRX STI models.

This kit replaces factory oil feed components to provide a dependable path for oil to reach the turbocharger bearings. It is specifically engineered for stock-location turbocharger setups, ensuring proper clearance and fitment without the need for custom fabrication. By replacing aging or restrictive factory lines, this kit helps maintain consistent oil pressure and prevents common failure points in the turbo oiling system.

• Direct replacement for stock-location EJ turbo oil feed lines
• Engineered for consistent oil delivery and pressure
• Compatible with factory mounting points and turbo orientations
• Manufacturer Part Number: TS-SU-577

Fits 2002-2014 Subaru WRX and 2007-2018 Subaru WRX STI.

The Torque Solution Top Feed Fuel Rails are engineered to eliminate the fuel delivery bottlenecks found in the factory Subaru EJ-series fuel system. These rails are essential for high-horsepower builds requiring increased fuel volume and consistent pressure across all cylinders. By replacing the restrictive OEM lines and rails, you ensure your injectors receive the steady flow necessary for aggressive tuning and large-bore injector setups.

• Precision CNC machined construction for exact fitment and leak-free performance
• Anodized Red finish for superior corrosion resistance and engine bay aesthetics
• Large internal bore diameter to maximize fuel flow and dampen pressure pulses
• Compatible with most aftermarket top-feed fuel injectors
• Direct replacement for factory top-feed rail configurations
• Manufacturer Part Number: TS-SU-400R.2

Fits 2002-2014 Subaru WRX and 2007-2018 Subaru STI.

Torque Solution Top Feed Fuel Rails are engineered to eliminate the flow restrictions inherent in the factory fuel delivery system. By increasing the internal bore and volume, these rails ensure consistent fuel distribution to all cylinders, making them a critical upgrade for high-horsepower builds utilizing upgraded fuel pumps and larger top-feed injectors. Each rail is CNC machined for precise fitment and features a durable purple anodized finish to protect against corrosion while enhancing the aesthetics of the engine bay.

• CNC machined billet aluminum construction
• Vibrant purple anodized finish for corrosion resistance
• Large internal bore to support high fuel volume requirements
• Designed for top-feed injector configurations
• Direct replacement for specific Subaru WRX and STI applications
• Manufacturer Part Number: TS-SU-400PR.2