Ensure precise fuel delivery and maximum performance with the Injector Dynamics ID1300x series. These 1340cc injectors are engineered for high-output applications, providing exceptional atomization and consistent flow rates across all pulse widths. The ID1300x was designed specifically to bridge the gap between the ID1050x and the ID1700x, offering a high flow rate with the stability required for idle and low-load conditions.

This set is configured with a 48mm length, featuring 11mm gold tops for Denso-style fitment and -204 low cushions. Built with all-stainless internals, these injectors are compatible with all known automotive fuels, including E85 and other alcohol-based fuels, without the risk of corrosion or clogging common in lesser components.

• Flow Rate: 1340cc/min at 3.0 bar (43.5 psi)
• Injector Length: 48mm (O-ring to O-ring)
• Inlet Diameter: 11mm Gold Top (Denso-style)
• Lower Seal: -204 Low Cushion
• Internals: Corrosion-resistant stainless steel
• Quantity: Flow-matched set of 4
• Manufacturer Part Number: 1300.48.11.WRX.4

Upgrade your fuel system with this matched set of four Injector Dynamics 1300 series fuel injectors, delivering a precise 1340cc/min flow rate. These high-impedance injectors are engineered for consistent performance and superior atomization in high-output applications. This specific configuration features a 48mm length, an 11mm red top adapter, and an S2000-style lower seal for a secure fit in compatible intake manifolds.

• Flow Rate: 1340cc/min
• Length: 48mm (O-ring to O-ring)
• Top Adapter: 11mm (Red)
• Lower Configuration: S2000
• Quantity: Set of 4
• Manufacturer Part Number: 1300.48.11.F20.4

This set of four Injector Dynamics 1300-series injectors provides a high-flow solution for performance engines requiring precise fuel delivery and E85 compatibility. Designed with all-stainless internals, these 1340cc injectors are resistant to corrosion and provide exceptional atomization at both low and high duty cycles. This specific configuration features a compact 34mm length and 14mm O-rings at both the inlet and outlet, ensuring a proper seal in fuel rails and manifolds designed for standard 14mm fitment without the need for additional adapters.

• Manufacturer Part Number: 1300.34.14.14.4
• Flow Rate: 1340cc/min at 3.0 bar (43.5 psi)
• Installation Length: 34mm (O-ring to O-ring)
• Upper O-Ring Diameter: 14mm
• Lower O-Ring Diameter: 14mm
• Internals: Corrosion-resistant stainless steel
• Quantity: Set of 4 matched injectors
• Fuel Compatibility: All known automotive fuels, including E85

Fits 2013-2023 Subaru BRZ models. These Injector Dynamics ID1300-XDS series injectors are engineered specifically for high-performance applications requiring high flow rates while maintaining exceptional low-flow control.

The ID1300 was developed in partnership with Bosch Motorsport to fill the gap between the ID1050x and ID1700x. It features all-stainless internals, making it fully compatible with all known automotive fuels, including corrosive alcohol-based fuels like E85. This ensures long-term reliability and consistent spray patterns even in demanding forced-induction setups.

• Flow Rate: 1300cc/min at 3.0 bar (43.5 psi)
• All-stainless internals for maximum fuel compatibility (E85/Ethanol/Methanol)
• Exceptional idle and cruise characteristics
• Matched sets with precise dead-time characterization
• Direct-fit for the Subaru BRZ fuel rail and harness
• Manufacturer Part Number: 1300.18.04.36.11.4

Each set includes four flow-matched injectors with application-specific adapters for a true bolt-on installation.

Fits 2004-2006 Subaru WRX STi.

The Injector Dynamics ID1300 top-feed conversion kit allows 2004-2006 Subaru STi owners to upgrade from the factory side-feed injector configuration to a modern top-feed setup. This transition is essential for high-horsepower builds requiring the superior flow and tuning stability of the ID1300 series. Designed with all-stainless internals, these injectors are fully compatible with all known automotive fuels, including E85 and other alcohol-based fuels.

Each injector is flow-matched to tight tolerances to ensure consistent fueling across all cylinders, improving idle quality and throttle response even at high duty cycles. This kit provides a complete solution for vehicles exceeding the limits of the stock fuel system while maintaining excellent low-pulse-width linearity.

• Flow Rate: 1300cc/min at 3.0 bar (43.5 psi)
• Set of 4 matched fuel injectors
• Converts factory side-feed systems to top-feed
• Stainless steel internals for maximum corrosion resistance
• Compatible with gasoline, ethanol, and methanol
• Manufacturer Part Number: 1300.18.01.48.14.4

Fits 2004-2005 Mazda Mazdaspeed Miata.

The Injector Dynamics ID1300 is a high-performance fuel injector developed in partnership with Bosch Motorsport. Specifically engineered for compatibility with all known automotive fuels, these injectors feature all-stainless internals, making them fully resistant to the corrosive nature of methanol and ethanol (E85). They provide a significant flow increase for forced induction builds while maintaining the linear response and idle stability Injector Dynamics is known for.

This set of four is flow-matched to tight tolerances across the entire pulse width range, ensuring consistent cylinder-to-cylinder fueling. By using the included characterization data, tuners can achieve OE-level drivability and precise fuel control under both vacuum and high-boost conditions.

• Manufacturer Part Number: 1300.11.02.60.11.4
• Nominal Flow Rate: 1300cc/min @ 3.0 Bar (43.5 psi)
• All-stainless internals for full ethanol/E85 compatibility
• Linear response down to low pulse widths for superior idle quality
• High-impedance design for compatibility with factory and aftermarket ECUs
• Set of 4 flow-matched injectors with application-specific adapters

The Injector Dynamics 1050X is a high-performance fueling solution designed for precision and reliability. This set of four injectors represents the evolution of the industry-standard ID1000, featuring a corrosion-resistant internal construction that makes it fully compatible with all known automotive fuels, including high-ethanol blends like E85. These injectors deliver exceptional idle quality and precise fuel metering across the entire flow range.

Engineered for seamless integration, this kit includes 14mm adapters to ensure a proper seal and fitment within the fuel rail and manifold. Every injector undergoes rigorous testing to provide the tightest flow matching in the industry, ensuring consistent cylinder-to-cylinder fuel distribution for optimized engine performance and safety.

• Manufacturer Part Number: 1050.60.14.14B.4
• Quantity: Set of 4
• Top Adapter: 14mm (Grey)
• Bottom Adapter: 14mm (Silver)
• Compatibility: All automotive fuels including E85
• Design: Corrosion-resistant stainless steel internals
• Flow Matching: Tightest tolerances for consistent delivery

The Injector Dynamics ID1050X is the high-performance evolution of the ID1000, engineered to provide precise fuel metering in a variety of automotive applications. This set of four injectors features an all-stainless internal construction, ensuring full compatibility with all known fuels, including alcohol-based options such as E85, Methanol, and MTBE. The 14mm purple top adapters are designed for a secure fit in fuel rails requiring a standard 14mm O-ring diameter.

Built using a Bosch motorsport core, the ID1050X series provides exceptional atomization and a highly linear flow rate even at low pulse widths. These high-impedance injectors offer the granular control necessary for stable idling and smooth low-load transitions while maintaining the flow capacity needed for high-boost or naturally aspirated performance builds.

• Manufacturer Part Number: 1050.60.14.14.4
• Product Series: ID1050X
• Adapter Size: 14mm (Purple) Top
• Quantity: Matched Set of 4
• Internal Construction: Corrosion-resistant stainless steel internals
• Fuel Compatibility: Safe for Pump Gas, E85, Methanol, and Oxygenated fuels

The Injector Dynamics ID1050X is the evolution of the industry-standard high-performance fuel injector. Designed to provide exceptional flow control and durability, this set of four injectors is engineered for enthusiasts requiring precise fuel delivery in demanding environments. These units feature 11mm blue adaptor tops and Denso lower seals for specific fuel rail and intake manifold fitment.

Constructed with all-stainless internals, the ID1050X series is fully compatible with all known fuels, including corrosive ethanol-based fuels like E85. These injectors provide superior low-pulse-width linearity and are flow-matched to ensure consistent performance across all cylinders, simplifying the tuning process and improving idle quality.

• Manufacturer Part Number: 1050.60.11.D.4
• Series: ID1050X
• Adaptor Tops: 11mm (Blue)
• Lower Seal: Denso style
• Quantity: Set of 4
• Compatibility: All known fuels including E85
• Internals: Corrosion-resistant stainless steel

The Injector Dynamics ID1050X is the highly evolved successor to the industry-standard ID1000, designed to provide superior atomization and flow control in high-performance applications. This set of four injectors is configured with 14mm grey top adaptors and GTR-specific lower spacers to ensure a precise, drop-in fit for fuel rails and manifolds requiring these specific dimensions.

Built to withstand the demands of modern performance tuning, the ID1050X features corrosion-resistant internals, making it fully compatible with all known fuels, including ethanol-based E85. These injectors provide exceptional idle stability and linear flow across the entire operating range, which is critical for consistent tuning and reliable power delivery.

• Manufacturer Part Number: 1050.48.14.R35.4
• Series: ID1050X (X-Series)
• Adaptor Size: 14mm (Grey)
• Lower Hardware: GTR Lower Spacers
• Quantity: Matched Set of 4
• Fuel Compatibility: All known automotive fuels, including E85 and Methanol
• Construction: Corrosion-resistant internal components

The Injector Dynamics ID1050X is the evolution of the industry-standard ID1000, developed in partnership with Bosch Motorsport. This X-Series injector is a performance-optimized solution for high-output engines requiring precision fueling and complete compatibility with all known fuels, including E85 and alcohol-based blends.

• Corrosion Resistant: Features all-stainless internals for long-term durability when used with corrosive oxygenated fuels.
• Improved Flow: Engineered for better performance at higher fuel pressures and improved low-flow control compared to the original ID1000.
• Specific Configuration: Includes 14mm grey adaptor bottoms for precise fuel rail fitment.
• Flow Matched: Sold as a matched set of 4 to ensure consistent cylinder-to-cylinder fuel delivery.
• Manufacturer Part Number: 1050.48.14.14B.4

The Injector Dynamics ID1050X is a high-performance fuel delivery solution designed for precision tuning and reliability. This set of four injectors features 14mm grey adaptor tops, ensuring a secure fit in compatible fuel rails. Built with corrosion-resistant internals, the ID1050X is fully compatible with all known automotive fuels, including ethanol-based fuels like E85, making it an ideal choice for forced induction or high-output naturally aspirated builds.

• Manufacturer Part Number: 1050.48.14.14.4
• Product Series: ID1050X
• Adaptor Top Size: 14mm (Grey)
• Quantity: Matched set of 4
• Fuel Compatibility: All known automotive fuels including E85
• Design: Corrosion-resistant internal components for long-term durability

The Injector Dynamics ID1050X is the motorsport standard for high-performance fueling, providing exceptional flow consistency and atomization. This set of four injectors comes equipped with WRX-16B 11mm red bottom adaptors, ensuring a precise fit for specific fuel rail configurations. Built with corrosion-resistant internals, these injectors are fully compatible with all known automotive fuels, including E85, and offer superior stability even at low pulse widths.

• Manufacturer Part Number: 1050.48.11.WRX.4
• Injector Series: ID1050X
• Adaptor Specification: WRX-16B 11mm Bottom Adaptors
• Color: Red
• Quantity: Set of 4 injectors with adaptors
• Internal Construction: Corrosion-resistant materials for alternative fuel compatibility
• Performance: High-pressure capability and optimized flow matching

Upgrade your fuel system with the Injector Dynamics ID1050X fuel injector set, specifically configured with 11mm red top adaptors and S2K-specific lower seals. The ID1050X represents the evolution of performance fuel delivery, featuring an all-new internal design that provides superior resistance to corrosion and improved performance across all fuel types.

• Fuel Compatibility: Fully compatible with all known fuels, including Ethanol (E85), MTBE, and Nitro-methane.
• Pressure Stability: Engineered to maintain linear flow even at high pressures and short pulse widths.
• Precise Fitment: Includes 11mm red top adaptors and lower seals designed for Honda S2000 (S2K) intake manifolds.
• Flow Matching: Delivered as a flow-matched set of four to ensure consistent cylinder-to-cylinder fuel delivery.
• Manufacturer Part Number: 1050.48.11.F20.4

Upgrade your fueling system with the Injector Dynamics ID1050X, the evolution of the industry-standard ID1000. These high-performance injectors are designed for motorsports applications requiring precision flow and total compatibility with all known automotive fuels, including E85 and other alcohol-based fuels. The X-Series features a compact body and all-stainless steel internals to prevent corrosion and ensure long-term reliability.

• Part Number: 1050.48.11.D.4
• Quantity: Set of 4 flow-matched injectors
• Length: 48mm (O-ring to O-ring)
• Top Adapter: 11mm Mach Top
• Bottom Fitting: Denso Low Cushion
• Material: Corrosion-resistant stainless steel internals
• Compatibility: Suitable for high-pressure systems and alternative fuels
• Performance: Exceptional low-pulse-width linearity and flow control

The Injector Dynamics ID1050X is the evolution of the high-performance fueling standard, engineered to provide exceptional low-flow stability and high-flow capability. These injectors feature corrosion-resistant internals, making them fully compatible with all known automotive fuels, including E85 and other alcohol-based blends.

This set of four injectors is configured with a 34mm length and 14mm top and lower o-rings for precise fitment in specific fuel rail and manifold applications. Each injector is flow-matched to tight tolerances to ensure consistent fuel delivery across all cylinders, which is critical for accurate tuning and engine safety under high-load conditions.

• Manufacturer Part Number: 1050.34.14.14.4
• Quantity: Set of 4 injectors
• Length: 34mm
• Top O-Ring: 14mm
• Lower O-Ring: 14mm
• Fuel Compatibility: Gas, Ethanol, E85, Methanol
• Internals: Corrosion-resistant stainless steel construction

Fits 2005-up Lotus Elise equipped with the 2ZZ-GE engine.

The Injector Dynamics ID1050X is the highly anticipated evolution of the ID1000, designed to provide superior idle and cruise behavior while supporting the high flow rates required for forced induction or high-output naturally aspirated builds. This set of four injectors features specific 11mm blue adaptor tops to ensure a precise fit for the 2ZZ-GE fuel rail and harness configuration.

Engineered with corrosion-resistant internals, the ID1050X is fully compatible with all known automotive fuels, including high-ethanol blends like E85. The X-Series design offers improved flow consistency at low pulse widths and handles higher base fuel pressures with ease, making it the versatile choice for drivers who demand OE-level drivability with aftermarket performance.

• Manufacturer Part Number: 1050.30.01.60.11.4
• Nominal Flow Rate: 1050cc/min @ 3.0 Bar (43.5 psi)
• 11mm Blue Adaptor Tops for Lotus-specific fitment
• Corrosion-resistant internals compatible with E85 and gasoline
• High-impedance design for compatibility with factory ECUs
• Flow-matched set of 4 injectors

Optimize your fuel system with this matched set of four Injector Dynamics ID1050 fuel injectors. Engineered for high-performance applications, these injectors deliver precise fuel metering and exceptional atomization across a broad range of operating pressures. This specific configuration includes 11mm anodized red top adapters and Denso-style lower cushions to ensure a secure, leak-free fitment between the fuel rail and intake manifold.

• Manufacturer Part Number: 1050.19.01.48.11.4
• Quantity: Set of 4 flow-matched injectors
• Top Adapter: 11mm diameter (Red)
• Lower Interface: Denso lower cushions
• High-impedance compatibility for simplified ECU integration
• Improved low-flow linearity for stable idle and light-throttle cruising

Upgrade your fuel system with this set of four Injector Dynamics ID1050 fuel injectors, specifically configured for the Subaru BRZ equipped with the 2.0L FA20 engine. These injectors are engineered to provide precise fuel metering and superior atomization, making them a preferred choice for tuners seeking reliable performance in both naturally aspirated and forced induction applications.

This kit utilizes 11mm machined tops and WRX-16B bottom adapters to ensure a proper seal and secure fitment within the fuel rail and manifold. Injector Dynamics injectors are known for their exceptional low-pulse-width linearity and tight flow-matching, which results in smoother idling and more consistent tuning across the entire RPM range.

• Manufacturer Part Number: 1050.18.04.36.11.4
• Engine Compatibility: 2.0L FA20
• Quantity: Set of 4 injectors
• Top Configuration: 11mm Machined Top
• Adapter Type: WRX-16B Bottom Adapters
• Direct fitment for select Subaru BRZ models

Fits 2004-2006 Subaru WRX STI models equipped with top-feed fuel injector conversion kits.

These genuine Injector Dynamics 2x8 lower O-rings are engineered to maintain a precise, leak-free seal between the fuel injector and the intake manifold adapter. Specifically designed for use with the ID1050.x series top-feed conversion kits, these -4 sized seals are critical for preventing unmetered air from entering the system, which can cause lean conditions or erratic idling. Whether you are performing a fresh installation or replacing worn seals during routine maintenance, using correct-spec O-rings ensures the integrity of your fueling system under high-boost conditions.

• Part Type: Lower Fuel Injector O-Rings
• Dimensions: 2mm x 8mm (-4)
• Quantity: Set of 2
• Application: Subaru STI Top-Feed Conversion (2004-2006)
• Manufacturer Part Number: 1050.18.01.48.14.4

Fits 2012-2015 Honda Civic Si models. This set of four Injector Dynamics ID1050X fuel injectors is the high-performance standard for modified K-series engines, providing exceptional idle quality and precise fuel metering even at high pressures.

The ID1050X features a revised internal flow path and corrosion-resistant internals, making it fully compatible with all known automotive fuels, including E85. These injectors are equipped with 14mm grey adapter tops to ensure a secure fit with the factory fuel rail and harness on the 9th-generation Civic Si.

• Manufacturer Part Number: 1050.07.21.48.14.4
• Flow-matched set of 4 injectors
• 14mm grey adapter tops for specific Honda fitment
• Corrosion-resistant stainless steel internals
• Improved internal flow path for better low-flow linearity
• Compatible with gasoline, ethanol, and methanol-based fuels

Fits select 1995-2006 Mitsubishi Lancer Evolution, Eclipse, and Eagle Talon (4G63T).

These DeatschWerks 1200cc high-flow fuel injectors are engineered for high-performance builds requiring precision fuel delivery. Designed as a top-feed, low-impedance solution, these injectors provide the necessary volume for forced induction 4G63T engines pushing well beyond factory power limits. DeatschWerks ensures reliability through rigorous in-house testing and flow-matching, providing a balanced fuel supply across all cylinders to prevent lean conditions under high boost.

• Flow Rate: 1200cc/min
• Impedance: Low Impedance
• Fuel Feed: Top Feed
• Compatibility: 4G63T Turbocharged engines
• Manufacturer Part Number: 42M-02-1200-4

Please note that as low-impedance injectors, these require a resistor pack or a compatible aftermarket ECU for proper operation. This set is a direct fit for the fuel rails found on the listed DSM and Evolution chassis.

Fits select 2010-2014 Hyundai Genesis Coupe (2.0T).

DeatschWerks 550cc high-flow fuel injectors provide a precision-engineered, drop-in solution for the Hyundai Genesis Coupe. Designed for enthusiasts who need increased fuel volume for modified or boosted applications, these injectors offer a direct fit into the factory fuel rail and electrical harness. This eliminates the need for complex wiring adapters or manifold modifications, ensuring a cleaner installation and reliable performance.

• Flow Rate: 550cc/min at 3 bar
• Direct drop-in fitment for the factory fuel system
• Engineered for precise fuel metering and atomization
• Designed for Sport Compact high-performance applications
• Manufacturer Part Number: 21S-06-0550-4

Fits select 2002-2011 Subaru Impreza WRX, WRX Limited, and WRX TR models.

Support your engine's fueling requirements with this set of DeatschWerks high-flow fuel injectors. Engineered as a drop-in fitment solution, these top-feed injectors provide a flow rate of 565cc, making them an ideal upgrade for modified vehicles requiring increased fuel volume without the need for complex fuel rail modifications. Each injector is designed to integrate seamlessly into the factory fuel system while maintaining the reliability required for both street and performance applications.

• Flow Rate: 565cc
• Fuel Injector Type: Top Feed
• Fitment Style: Drop-in application
• Quantity: Set of 4 injectors
• Precision-matched for consistent cylinder-to-cylinder fueling
• Manufacturer Part Number: 21S-01-0565-4

Fits select 2013-2018 Ford Focus and 2015-2017 Ford Mustang (2.0L / 2.3L).

DeatschWerks 1700cc GDI fuel injectors are engineered to meet the high fuel volume demands of modified Ford EcoBoost engines. These Gasoline Direct Injection (GDI) injectors provide the flow necessary for high-horsepower builds without compromising the precise spray pattern and atomization required for efficient combustion and stable idle. Designed as a drop-in fitment solution, they integrate directly with the factory fuel rail and electrical connectors for a streamlined installation process.

• Flow Rate: 1700cc/min
• Injection Type: Gasoline Direct Injection (GDI)
• Installation: Drop-in fitment for specified Ford 2.0L and 2.3L platforms
• Manufacturer Part Number: 19S-01-1700-4

Fits select 2000-2011 Lotus Elise and Exige, Scion tC, xA, and xB, and Toyota Celica and MR2 Spyder (1.8L).

Upgrade your vehicle's fueling capabilities with this set of DeatschWerks 650cc high-flow fuel injectors. Engineered as a drop-in fitment solution, these injectors are designed to integrate seamlessly with your factory fuel rail and harness, providing the increased flow required for forced induction or high-output naturally aspirated builds. Each set is flow-matched to ensure consistent cylinder-to-cylinder performance, critical for maintaining optimal air-fuel ratios and engine safety.

• Flow Rate: 650cc/min
• Manufacturer Part Number: 18U-11-0650-4
• Configuration: Drop-in fitment for 1.8L applications
• Quality assurance tested in DeatschWerks' 36,000sf Oklahoma facility

Fits select 2000-2011 Toyota Celica/MR2 Spyder, Lotus Elise/Exige, and Scion tC/xA/xB (1.8L).

DeatschWerks 550cc fuel injectors provide a precision-engineered fuel delivery solution for high-performance 1.8L Toyota-sourced engines. These injectors are designed for drop-in fitment, utilizing the factory fuel rail and electrical connectors to simplify installation while providing the increased flow required for forced induction or high-output naturally aspirated builds.

Every DeatschWerks injector set undergoes rigorous multi-point dynamic flow testing to ensure balance and consistency across all cylinders. This set replaces the factory units with high-impedance coils, maintaining compatibility with the OEM ECU while supporting significantly higher power levels.

• Flow Rate: 550cc/min at 43.5 psi
• Configuration: Drop-in fitment for factory rails and connectors
• Engine Compatibility: 1.8L
• Quantity: Set of 4 injectors
• Manufacturer Part Number: 18U-11-0550-4

This set of DeatschWerks high-flow fuel injectors is designed to provide the precise fuel delivery required for high-performance turbocharged and naturally aspirated builds. Engineered for drop-in fitment, these 1000cc injectors serve as a direct upgrade for select 1995-2006 Mitsubishi and Eagle models, including the Eclipse, Lancer Evolution, and Talon.

Fits 1995-1999 Mitsubishi Eclipse (GST/GSX), 2003-2006 Mitsubishi Lancer Evolution (MR/RS/SE), and 1995-1998 Eagle Talon (Base/ESi/TSi).

DeatschWerks injectors are rigorously tested for flow balance and quality assurance to ensure consistent performance across all cylinders. These high-impedance units are compatible with various fuel types and provide the headroom needed for increased boost and power levels without sacrificing idle quality.

• Flow Rate: 1000cc
• Impedance: High Impedance
• Configuration: Drop-in fitment for factory rails and harnesses
• Manufacturer Part Number: 18U-08-1000-4
• Quantity: Set of 4

Fits select 1995-2006 Mitsubishi Eclipse and Lancer Evolution (DSM/EVO 8/9).

DeatschWerks high-impedance fuel injectors provide a reliable drop-in solution for the 2G Eclipse and Evolution 8/9 platforms. These 800cc injectors are designed to support higher horsepower builds by delivering a precise, high-flow fuel spray that satisfies the demands of turbocharged engines under increased boost. Engineered for ease of installation, these units allow for a direct replacement of the factory injectors while maintaining proper idle and driveability through high-quality internal components.

• Flow Rate: 800cc/min
• Impedance: High Impedance
• Installation: Drop-in fitment into factory fuel rails
• Manufacturer Part Number: 18U-08-0800-4

Vehicle Fitment:

• 1995-1999 Mitsubishi Eclipse GST & GSX (2.0L Turbo)
• 2003-2006 Mitsubishi Lancer Evolution (EVO 8/9, MR, RS, SE)

Fits select 2013-2014 Hyundai Genesis and Genesis Coupe (2.0L / 2.0T).

DeatschWerks high-flow fuel injectors are engineered to provide precise fuel delivery for high-performance applications. This set of four 1000cc injectors offers a drop-in fitment solution, simplifying the upgrade process by utilizing factory-style connections. Each injector is manufactured to strict tolerances to ensure consistent flow rates across the entire set, providing the fuel volume necessary to support increased boost and performance demands.

• Flow Rate: 1000cc/min
• Quantity: Matched set of 4 injectors
• Fitment Type: Drop-in installation
• Engine Compatibility: 2.0L / 2.0T
• Manufacturer Part Number: 18U-06-1000-4