Fits 1990-2005 Mazda Miata including Base, LS, M Edition, Mazdaspeed, and Special Edition trims.

DeatschWerks high-flow fuel injectors are engineered for the performance enthusiast looking for a drop-in fueling solution. This set of 1000cc injectors provides the increased fuel delivery required for high-horsepower builds, including forced induction and high-compression naturally aspirated applications. Each set is dynamic-flow-matched at the DeatschWerks facility in Oklahoma City to ensure consistent fuel delivery across all four cylinders, maintaining optimal idle quality and drivability.

• Manufacturer Part Number: 18U-05-1000-4
• Flow Rate: 1000cc/min at 3 bar
• Configuration: Set of 4 fuel injectors
• Installation: Drop-in fitment for Mazda B6/BP fuel rails
• Quality Assurance: In-house designed and tested for Sport Compact applications

Fits 1990-2005 Mazda Miata models including Base, LS, SE, and Mazdaspeed editions.

This set of four DeatschWerks 800cc fuel injectors is designed to support the increased fueling demands of high-performance and forced induction builds on the NA and NB Mazda Miata platforms. These injectors are engineered for precision flow and consistent atomization, providing the reliability needed for modified engine management systems.

• Manufacturer Part Number: 18U-05-0800-4
• Flow Rate: 800cc/min
• Quantity: Matched set of 4 injectors
• Application: Specifically engineered for 1990-2005 Mazda Miata fuel systems

Fits 1990-2005 Mazda Miata (NA and NB chassis) including Base, LS, M Edition, and Mazdaspeed models.

Support your high-performance build with this set of four DeatschWerks 650cc fuel injectors. These injectors are engineered to provide the increased fuel volume necessary for forced induction or high-output naturally aspirated Mazda Miata engines. Every set undergoes rigorous multi-point dynamic flow testing to ensure a variance of no more than 1-2% across the set, which is critical for maintaining consistent air-fuel ratios across all cylinders and achieving a stable idle.

• Flow Rate: 650cc/min at 43.5 psi
• Flow-matched within 1-2% for superior tuneability
• High-impedance (saturated) coil design
• Direct drop-in fitment for OE fuel rails and harnesses
• Includes all required O-rings and seals
• Manufacturer Part Number: 18U-05-0650-4

Fits 1990-2005 Mazda Miata models including Base, LS, M Edition, and Mazdaspeed.

Support your Mazda Miata's performance goals with this precision-matched set of four 440cc fuel injectors from DeatschWerks. Specifically engineered for the 1990-2005 NA and NB chassis, these high-impedance injectors provide a direct-fit solution for owners moving toward forced induction or aggressive naturally aspirated builds that exceed the capacity of the factory fuel system.

• Flow Rate: 440cc/min at 43.5 psi
• High-impedance (saturated) coil design for compatibility with the factory ECU
• Dynamic flow matching within 1-2% for consistent cylinder-to-cylinder fueling
• Compatible with factory fuel rails and electrical connectors
• Manufacturer Part Number: 18U-05-0440-4

Every DeatschWerks injector set undergoes rigorous in-house testing to ensure superior spray pattern and atomization. This set of 4 injectors provides the reliable fuel delivery needed to maintain safe air-fuel ratios under increased load, whether on the street or the track.

Fits select 1986-2001 Honda Civic and Acura Integra models equipped with B, D, or H-series engines (OBD I & II).

This DeatschWerks high-flow fuel injector set provides a drop-in fitment solution for enthusiasts looking to increase fueling capacity on Honda and Acura B, D, and H-series platforms. Designed to replace restrictive factory units, these 1000cc injectors are engineered for precise fuel delivery and improved atomization, supporting higher horsepower levels in forced induction or high-compression naturally aspirated builds.

DeatschWerks injectors are flow-balanced in-house to ensure consistent performance across all cylinders, reducing the risk of lean conditions. Each set is rigorously tested to meet strict quality standards before leaving their 36,000sf facility in Oklahoma City.

• Flow Rate: 1000cc/min
• Quantity: Set of 4
• Engine Compatibility: Honda/Acura B, D, and H-series
• System Compatibility: OBD I and OBD II
• Fitment Style: Drop-in application
• Manufacturer Part Number: 18U-04-1000-4

Fits 1991-2001 Acura Integra and 1992-2000 Honda Civic with B, D, or H-Series engines (OBD I and OBD II).

Ensure precise fuel delivery and consistent performance with this flow-matched set of DeatschWerks 550cc injectors. Engineered as a drop-in fitment for Honda and Acura B/D/H series platforms, these injectors provide the increased flow capacity required for forced induction or high-output naturally aspirated builds. Each set undergoes multi-point testing to ensure optimal cylinder-to-cylinder fueling, resulting in better tuneability and smoother idling.

• Flow Rate: 550cc/min
• Engine Compatibility: Honda/Acura B-Series, D-Series, and H-Series
• System Compatibility: Supports both OBD I and OBD II electronics
• Testing: Flow-matched and balanced sets
• Manufacturer Part Number: 18U-04-0550-4

Fits 1989-1990 Nissan 240SX SE and XE models equipped with the SOHC KA24E engine.

Optimize your fuel system with this set of four DeatschWerks 800cc fuel injectors, specifically engineered for the SOHC KA24E power plant. These high-flow injectors provide a direct-fit solution for 1989-1990 Nissan 240SX owners looking to support increased horsepower levels while maintaining reliable fuel delivery and consistent spray patterns.

Every DeatschWerks injector set undergoes rigorous testing to ensure precision matching and performance. Designed as a drop-in replacement, these injectors integrate with your existing fuel rail and electrical connectors, simplifying the installation process for high-performance builds. Whether you are running forced induction or a heavily modified naturally aspirated setup, these 800cc units provide the necessary overhead for safe and effective tuning.

• Flow Rate: 800cc/min
• Configuration: Set of 4 matched injectors
• Engine Compatibility: Nissan 2.4L SOHC (KA24E)
• Installation: Drop-in fitment
• Manufacturer Part Number: 18U-02-0800-4

Fits 1989-1990 Nissan 240SX SE and XE models equipped with SOHC engines.

Upgrade your fuel system with this set of DeatschWerks 550cc top feed injectors, engineered specifically for the fueling demands of the SOHC KA24E engine. These high-flow injectors provide a direct-fit solution to replace your restrictive factory units, ensuring your engine receives the precise volume of fuel needed for performance tuning and high-demand applications. Each injector set is flow-matched and tested to ensure consistent delivery across all cylinders, improving overall engine stability and power potential.

• Manufacturer Part Number: 18U-02-0550-4
• Flow Rate: 550cc
• Configuration: Top Feed
• Application: Nissan 240SX SOHC (KA24E)
• Direct drop-in fitment for compatible models

Maximize your engine's fueling potential with this set of four DeatschWerks Bosch EV14 high-performance fuel injectors. These injectors are engineered for precision and consistency, utilizing the proven Bosch EV14 internal architecture to ensure stable fuel delivery even in demanding high-horsepower applications. Featuring a 78lb/hr flow rate and a standard 60mm O-ring to O-ring length, they serve as a reliable high-flow solution for forced induction or E85-tuned engines where factory injectors fall short.

• Flow Rate: 78lb/hr (820cc/min) at 43.5 psi
• Injector Core: Genuine Bosch EV14 internals for fast response and superior atomization
• Length: 60mm Standard (O-ring to O-ring)
• Quantity: Set of 4 flow-matched injectors
• Compatibility: Universal high-impedance design compatible with most factory and aftermarket ECUs
• Manufacturer Part Number: 18U-00-0078-4

Upgrade your fuel system with this set of four DeatschWerks fuel injectors, engineered using the proven Bosch EV14 platform. These universal high-performance injectors feature a 60mm standard length and a 60lb/hr (approximately 630cc/min) flow rate at 3bar, making them an ideal choice for forced induction and high-horsepower naturally aspirated builds requiring precise fuel delivery.

Built with modern EV14 technology, these injectors provide superior atomization and faster response times compared to older designs. Each set is flow-matched to ensure consistent cylinder-to-cylinder performance, reducing the risk of lean conditions during high-load operation. These are high-impedance injectors, compatible with most factory and aftermarket ECUs without the need for a resistor box.

• Manufacturer Part Number: 18U-00-0060-4
• Flow Rate: 60lb/hr (630cc/min) at 43.5 psi
• Technology: Bosch EV14 (High Impedance)
• Physical Length: 60mm (Standard/Long)
• Connector Type: Bosch EV14 / Jetronic
• Includes: Set of 4 injectors with pre-installed O-rings

Upgrade your vehicle's fuel delivery with this set of four DeatschWerks Bosch EV14 60mm standard fuel injectors. Utilizing the industry-standard Bosch EV14 platform, these high-impedance injectors are engineered for precision and reliability in high-performance applications. With a flow rate of 50lb/hr (approximately 525cc/min), they provide the necessary volume for forced induction or built naturally aspirated engines while maintaining excellent low-pulse-width linearity for a smooth idle and consistent drivability.

As universal components, these 60mm injectors are designed to fit a wide range of aftermarket and factory fuel rails. DeatschWerks subjects every set to rigorous multi-point dynamic flow testing to ensure each injector is closely matched, providing balanced fuel delivery across all cylinders for safer tuning and optimized power output.

• Manufacturer Part Number: 18U-00-0050-4
• Flow Rate: 50lb/hr (525cc/min)
• Injector Platform: Bosch EV14
• Physical Length: 60mm (Standard)
• Impedance: High Impedance
• Quantity: Set of 4 matched injectors

Fits select 2002-2015 Acura and Honda models, including RSX, TSX, ILX, Civic Si, S2000, and CR-Z.

This DeatschWerks fuel injector set (MPN 17U-08-1000-4) utilizes high-performance Bosch EV14 technology to provide the precise 1000cc fuel delivery required for high-horsepower K-Series and F-Series builds. Designed as a drop-in fitment solution, these injectors leverage the fast response times and superior atomization of the EV14 body to maintain excellent idle quality and tuning stability even at high flow rates.

Each set is flow-balanced by DeatschWerks to ensure consistent fuel delivery across all cylinders, protecting your engine from lean conditions during high-load or high-boost operation. These injectors are compatible with a wide range of fuels, providing the flexibility needed for modern performance applications.

• Flow Rate: 1000cc/min
• Injector Technology: Bosch EV14
• Compatibility: Drop-in fitment for K20, K24, and F22 engine platforms
• Set Type: Flow-matched for balanced cylinder delivery
• Manufacturer Part Number: 17U-08-1000-4

Fits select 2002-2015 Acura ILX, RSX, TSX, and Honda Civic Si, CR-Z, and S2000.

DeatschWerks 750cc fuel injectors provide a high-flow, drop-in solution for performance-oriented builds requiring increased fueling capacity. Engineered for precision and reliability, these injectors are essential for supporting the fuel demands of forced induction or high-output naturally aspirated engines. By utilizing factory-style fitment, these injectors integrate seamlessly with the existing fuel rail and electrical connectors on select Acura and Honda applications.

Each DeatschWerks fuel injector set undergoes rigorous multi-point dynamic flow testing to ensure that the set is balanced within a tight tolerance. This process provides consistent fueling across all cylinders, which is critical for maintaining stable idle quality and achieving an accurate tune in high-performance environments.

• Manufacturer Part Number: 17U-08-0750-4
• Flow Rate: 750cc/min
• Quantity: Matched Set of 4
• Fitment: Drop-in installation for select Acura and Honda engines
• Testing: Flow-matched for consistent cylinder-to-cylinder performance

Fits select 2002-2015 Acura ILX, RSX, TSX and Honda Civic Si, CR-Z, and S2000.

DeatschWerks high-performance fuel injectors are engineered to provide a reliable, drop-in fuel delivery solution for enthusiasts and tuners. This set of 650cc injectors is designed to support increased power levels by providing higher flow than factory components while maintaining excellent idle and low-speed drivability. Every injector is manufactured with precise tolerances to ensure consistent flow across the entire set, making them an essential upgrade for forced induction or high-output naturally aspirated builds.

• Manufacturer Part Number: 17U-08-0650-4
• Flow Rate: 650cc
• Configuration: Set of 4 injectors
• Fitment Type: Drop-in performance upgrade
• Engineered for optimized spray patterns and fuel atomization

Fits select 2002-2015 Acura ILX, RSX, TSX and Honda Civic Si, CR-Z, and S2000.

DeatschWerks high-performance fuel injectors are engineered to provide precise fuel delivery for modified Honda and Acura engines. This set of four 550cc injectors offers a true drop-in fitment, utilizing the factory fuel rail and electrical connectors for a simplified installation process. These injectors are flow-balanced to ensure consistent performance across all cylinders, making them a critical upgrade for K20, K24, and other performance-oriented powerplants where fuel demands exceed the capacity of the original equipment.

• Flow Rate: 550cc/min
• Configuration: Set of 4 matched injectors
• Installation: Drop-in fitment for factory rails
• Quality: Flow-balanced and tested for reliability
• Manufacturer Part Number: 17U-08-0550-4

Compatible Vehicles:

• 2013-2015 Acura ILX (Base, Hybrid)
• 2002-2006 Acura RSX (Base, Type-S)
• 2004-2014 Acura TSX (Base, Special Edition, V6)
• 2002-2015 Honda Civic Si
• 2011-2015 Honda CR-Z (Base, EX)
• 2006-2009 Honda S2000 (Base, CR)

Fits select 2002-2015 Acura ILX, RSX, TSX and Honda Civic Si, CR-Z, and S2000 models.

DeatschWerks 440cc fuel injectors provide a high-performance fueling solution with the ease of drop-in fitment. Designed to integrate seamlessly with the factory fuel rail and electrical harness, these injectors eliminate the need for wiring adapters or spacers in supported applications. Each set is flow-balanced to ensure consistent fuel delivery across all cylinders, supporting smoother idling and reliable performance under load for naturally aspirated or mild forced induction builds.

• Flow Rate: 440cc/min
• Fitment: Application-specific drop-in design
• Flow-matched for balanced delivery across the set
• High-impedance (saturated) circuitry for compatibility with OE ECUs
• Optimized spray pattern for improved fuel atomization
• Manufacturer Part Number: 17U-08-0440-4

Fits select 2002-2018 Subaru Impreza, WRX, WRX STI, and Legacy GT spec.B.

DeatschWerks fuel injectors provide the increased flow capacity necessary for high-horsepower Subaru builds while maintaining the idle quality and low-load drivability required for a street-driven vehicle. These 1000cc injectors are built using high-quality Bosch EV14 cores, known for their fast response times and superior fuel atomization.

Engineered for drop-in fitment, these injectors integrate with the factory fuel rails and electrical connectors where specified, reducing the need for complex modifications. Each set is flow-matched to ensure balanced fuel delivery across all cylinders, providing the consistency needed for precise tuning and engine safety under boost.

• Flow Rate: 1000cc/min
• Injector Technology: Bosch EV14
• Installation: Drop-in fitment for supported applications
• Manufacturer Part Number: 17U-07-1000-4

Fits select 2002-2017 Subaru WRX, WRX STI, and Legacy GT spec.B models.

DeatschWerks Bosch EV14 750cc fuel injectors provide the precise fuel delivery required for modified Subaru EJ engines. These injectors are built on the trusted Bosch EV14 core, offering fast response times and excellent atomization for improved idle stability and consistent fueling across the entire powerband. They are a primary solution for enthusiasts moving beyond the capacity of factory injectors, especially when upgrading turbochargers or switching to E85 fuel.

Each set is flow-matched and designed for a drop-in fitment within the factory top-feed fuel system. The high-impedance coils allow for compatibility with the stock ECU while providing the overhead needed for high-boost applications.

• Manufacturer Part Number: 17U-07-0750-4
• Flow Rate: 750cc/min at 43.5 psi
• Technology: Bosch EV14 Core
• Configuration: Top-feed fuel injector
• Compatibility: Optimized for Gasoline and E85
• Quantity: Set of 4 matched injectors

Fits select 2002-2017 Subaru WRX, WRX STI, and Legacy GT models (EJ20/EJ25 engines).

This DeatschWerks 650cc top-feed fuel injector set is a critical upgrade for turbocharged Subaru EJ-series engines. These injectors are designed to provide the increased fuel volume necessary for modified builds while maintaining excellent low-end drivability. Every set undergoes dynamic flow matching to ensure each cylinder receives the exact same amount of fuel, preventing lean conditions and optimizing engine longevity.

• Flow Rate: 650cc/min
• Configuration: Top Feed
• Quantity: Matched Set of 4
• Manufacturer Part Number: 17U-07-0650-4
• Compatibility: Subaru EJ20 and EJ25 engines

DeatschWerks injectors are drop-in replacements for factory top-feed rails, featuring advanced internal pintle designs for superior atomization and a custom flow report for precise tuning. These units are E85 compatible and provide a reliable solution for enthusiasts targeting moderate horsepower gains.

Fits select 1999-2014 Hyundai Genesis Coupe, Nissan Sentra, and Subaru Impreza (2.0T).

These DeatschWerks 1000cc high-flow fuel injectors provide a reliable, drop-in fueling solution for high-performance builds. Designed to meet the demands of forced induction and high-output engines, each set of four is flow-matched in-house to ensure precise and uniform delivery across all cylinders. This level of consistency is critical for maintaining safe air-fuel ratios and optimizing engine tuning.

As a specialist in performance fuel systems, DeatschWerks engineers these components for direct fitment, replacing worn or restrictive factory injectors without the need for complex rail modifications. Each injector undergoes rigorous quality assurance at their 36,000-square-foot facility to ensure it meets strict performance tolerances.

• Manufacturer Part Number: 17U-06-1000-4
• Flow Rate: 1000cc/min
• Quantity: Set of 4 fuel injectors
• Fitment Style: Application-specific drop-in fitment
• Compatibility: Engineered for select Hyundai, Nissan, and Subaru platforms

Fits 2010-2014 Hyundai Genesis Coupe (2.0T).

Provide your engine with the precise fuel delivery required for high-performance tuning with this set of four DeatschWerks 750cc fuel injectors. Engineered specifically for the 2010-2014 Hyundai Genesis Coupe 2.0T, these injectors feature a drop-in design that utilizes factory mounting points and electrical connectors for a straightforward installation. Each injector is flow-balanced to ensure consistent performance across all cylinders, making them an ideal choice for forced induction or high-output builds where reliable fuel volume and atomization are critical.

• Manufacturer Part Number: 17U-06-0750-4
• Flow Rate: 750cc/min
• Quantity: Matched set of 4 injectors
• Installation: Direct drop-in fitment
• Design: Compatible with factory fuel rails and harnesses
• Application: Specifically optimized for Sport Compact performance

Fits select 2001-2008 Audi A4/TT, Mini Cooper S, and Volkswagen Golf GTI (1.8T).

This set of DeatschWerks 1000cc fuel injectors (MPN: 17U-01-1000-4) is designed for high-performance Euro and sport compact applications. Engineered to provide a high-flow fueling solution, these injectors offer a drop-in fitment that replaces worn or insufficient OE components. Each injector undergoes rigorous quality assurance at DeatschWerks' 36,000sf facility to ensure precise fuel delivery and consistency across the entire set, which is critical for maintaining safe air-fuel ratios in tuned 1.8T engines.

• Flow Rate: 1000cc/min
• Part Number: 17U-01-1000-4
• Engine Compatibility: 1.8T
• Fitment Type: High-flow drop-in
• Application: Euro, Sport Compact, and Modern Muscle

Vehicle Fitment:

Fits select 2001-2008 Audi A4 and TT, Mini Cooper S, and Volkswagen Golf GTI (1.8T).

DeatschWerks 750cc fuel injectors provide high-performance fuel delivery for enthusiasts looking to support increased boost or naturally aspirated modifications. These injectors are engineered for drop-in fitment, allowing for a simplified installation while maintaining a high level of spray atomization for better tuning and engine response. Every set is flow-matched to ensure consistent performance across all cylinders.

• Manufacturer Part Number: 17U-01-0750-4
• Flow Rate: 750cc/min
• Configuration: Set of 4 injectors
• Engine Compatibility: 1.8T and select Euro/Sport Compact applications
• Direct drop-in fitment for easy installation

DeatschWerks fuel system components are designed and tested in their 36,000sf facility in Oklahoma City. By focusing on precision and reliability, DW injectors have become a standard choice for Sport Compact and Euro tuners who require dependable fuel flow under demanding conditions.

Fits select 2001-2008 Audi A4/TT, Mini Cooper S, and Volkswagen Golf GTI (1.6L / 1.8T).

This set of four DeatschWerks high-flow fuel injectors is engineered to provide a drop-in fueling solution for performance-oriented Sport Compact and Euro applications. Each injector is precision-manufactured and flow-matched to ensure consistent fuel delivery across all cylinders, which is critical for maintaining safe air-fuel ratios in forced induction environments. These injectors are designed as a direct-fit replacement for the factory units, utilizing the existing fuel rail and electrical connectors for a simplified installation process.

• Flow Rate: 550cc/min
• Configuration: Set of 4 injectors
• Manufacturer Part Number: 17U-01-0550-4
• Fitment Type: Vehicle-specific drop-in
• Compatible Engines: 1.6L Supercharged and 1.8T Turbocharged

Vehicle Fitment:

• 2001-2006 Audi A4 Base (1.8T)
• 2003-2006 Audi A4 Cabriolet (1.8T)
• 2001-2006 Audi TT Base (1.8T)
• 2002-2008 Mini Cooper S (1.6L Supercharged)
• 2006 Volkswagen Golf GTI 1.8T

Fits select 2003-2009 Chrysler PT Cruiser, Dodge Caliber SRT-4, Dodge Neon SRT-4, and Jeep Wrangler.

These DeatschWerks fuel injectors utilize the industry-standard Bosch EV14 platform to deliver precise, high-volume fuel for forced induction or high-output naturally aspirated builds. Engineered for drop-in fitment, these 48mm standard-length injectors provide a significant upgrade over factory units, supporting higher horsepower levels while maintaining the spray pattern and atomization necessary for smooth idle and drivability.

Each set is precision-matched to ensure balanced fuel delivery across all cylinders, reducing the risk of lean conditions under load. These injectors are built to handle the demands of modern performance tuning and are compatible with various fuel types.

• Flow Rate: 95lb/hr
• Injector Type: Bosch EV14
• Length: 48mm (Standard)
• Quantity: Matched set of 4
• Fitment: Drop-in for select Chrysler, Dodge, and Jeep applications
• Manufacturer Part Number: 17U-00-0095-4

Fits 2008-2015 Mitsubishi Lancer Evolution (GSR, MR, MR Touring, SE, and Final Edition).

Support your high-horsepower 4B11T build with the precision and reliability of DeatschWerks 1100cc XT Nozzle fuel injectors. Engineered specifically for high-performance Mitsubishi Evolution X applications, these injectors utilize advanced XT nozzle technology to provide superior fuel atomization compared to traditional high-flow injectors. This leads to improved idle quality, better combustion efficiency, and enhanced tuning stability across the entire RPM range.

As a drop-in fitment solution, these injectors are designed to integrate seamlessly with your factory or aftermarket fuel rail. Each set is dynamic flow-matched to ensure balanced cylinder-to-cylinder delivery, significantly reducing the risk of lean conditions during high-boost operation. Whether you are running pump gas or E85, these units provide the flow capacity and response time required for aggressive tuning.

• Flow Rate: 1100cc/min
• Advanced XT Nozzle technology for optimized spray patterns
• Dynamic flow matching for consistent fueling across all cylinders
• Direct fitment for 2008-2015 Mitsubishi Lancer Evolution X models
• Manufacturer Part Number: 17MX-10-1100-4

Fits 2013-2025 Subaru BRZ, Scion FR-S, and Toyota 86/GR86.

DeatschWerks 900cc/min MPFI fuel injectors provide a precise, high-flow solution for the 2013-2025 Subaru BRZ, Toyota 86/GR86, and Scion FR-S platforms. These injectors are engineered for drop-in fitment, replacing the factory multi-port fuel injectors to support the increased fuel demands of forced induction builds or E85 conversions. Each set is manufactured with the precision required to maintain consistent spray patterns and flow rates across all cylinders, ensuring reliable performance under high-load conditions.

• Flow Rate: 900cc/min
• Injection Type: Multi-Port Fuel Injection (MPFI)
• Installation: Drop-in fitment for compatible models
• Manufacturer Part Number: 16U-02-0900-4

Fits 2013-2025 Subaru BRZ, Scion FR-S, and Toyota 86/GR86 (2.0L / 2.4L).

DeatschWerks provides high-performance fuel system solutions designed specifically for the requirements of modern sport compact engines. These 700cc/min multi-port fuel injectors (MPFI) offer a significant flow increase over factory units, providing the additional fueling necessary for forced induction or high-output naturally aspirated builds. Engineered for drop-in fitment, these injectors integrate directly with the factory fuel rails and electrical connectors, simplifying installation while maintaining precise fuel delivery.

Every DeatschWerks injector undergoes rigorous in-house testing and quality assurance at their Oklahoma City facility to ensure balanced flow rates and consistent performance across the entire set. This set is specifically calibrated for the port injection side of the FA20 and FA24 dual-injection systems.

• Flow Rate: 700cc/min
• Configuration: Multi-Port Fuel Injection (MPFI)
• Installation: Drop-in fitment
• Manufacturer Part Number: 16U-02-0700-4

Authoritative Fitment:

Fits select 2013-2025 Subaru BRZ, Scion FR-S, and Toyota 86/GR86 models.

DeatschWerks 450cc/min fuel injectors provide a high-performance fueling solution for the multi-port fuel injection (MPFI) side of the FA20 and FA24 platforms. These injectors are engineered as a drop-in replacement for the factory port injectors, offering increased flow capacity essential for E85 conversions, high-output naturally aspirated builds, or forced induction applications. By delivering a precise spray pattern and consistent atomization, these injectors ensure reliable performance and easier tuning across the entire RPM range.

• Flow Rate: 450cc/min
• Injection Type: MPFI (Multi-Port Fuel Injection)
• Fitment Type: Drop-in replacement for factory fuel rails
• Manufacturer Part Number: 16U-02-0450-4
• Configuration: Set of 4 injectors

Each set is flow-matched to ensure optimal cylinder-to-cylinder balance, helping to prevent lean conditions and maximize engine safety. These injectors utilize factory-style electrical connectors for a true plug-and-play installation without the need for harness modification.

This set of four DeatschWerks Bosch EV14 fuel injectors provides precise fuel delivery for high-performance builds. Featuring a 90lb/hr flow rate and a 40mm compact body, these injectors are designed for universal applications where space is limited and high output is required.

The Bosch EV14 architecture is renowned for its fast response times and superior fuel atomization, ensuring consistent idle quality and reliable performance under load. Each injector is meticulously tested and flow-matched to provide a balanced set for your engine.

• Flow Rate: 90lb/hr
• Body Style: 40mm Compact
• Architecture: Bosch EV14
• Fitment Type: Universal
• Quantity: Matched Set of 4
• Manufacturer Part Number: 16U-00-0090-4