The Innovate Motorsports 18-foot sensor cable provides a critical link between your wideband air/fuel ratio controller and a Bosch LSU 4.9 O2 sensor. This extended 18-foot length is ideal for large vehicles, rear-engine applications, or chassis dyno setups where standard length cables are insufficient. To ensure proper operation, users can verify sensor selection and configuration by connecting their Innovate controller to the LM Programmer software.

• Designed for use with Bosch LSU 4.9 wideband oxygen sensors
• 18-foot length for flexible routing and installation
• Precision locking connectors for secure, vibration-resistant signal transmission
• Direct replacement for the standard cable in Innovate wideband kits
• Manufacturer Part Number: 3889

The Innovate Motorsports 8-foot LSU 4.9 Sensor Cable (MPN 3887) is a direct replacement or extension lead designed to connect your wideband controller to a Bosch LSU 4.9 oxygen sensor. This heavy-duty cable ensures clean signal transmission for accurate air-fuel ratio (AFR) monitoring, featuring the specific connector footprint required for the 4.9 series sensor.

With a total length of 8 feet, this cable provides ample slack for routing from the exhaust bung, through the firewall, and into the cabin or engine bay. If you are unsure which sensor your system requires, you can verify the current sensor configuration by connecting your Innovate device to the LM Programmer software.

• Cable Length: 8 Feet
• Sensor Compatibility: Bosch LSU 4.9
• Manufacturer Part Number: 3887
• Connectors: OE-style multi-pin connectors for secure locking

The Innovate Motorsports LC-2 (MPN 3884) is a complete digital wideband lambda controller system designed for high-precision air/fuel ratio (AFR) monitoring. Utilizing patented DirectDigital signal processing, the LC-2 provides real-time data on engine combustion with faster response times than traditional analog wideband controllers. This makes it an essential tool for tuning engines under varying loads, altitudes, and temperatures.

Designed for versatility, the LC-2 features dual fully-programmable analog outputs, allowing it to provide signals to standalone ECUs, data acquisition systems, and dashboard gauges simultaneously. Its self-calibrating circuitry automatically adjusts for sensor wear and atmospheric changes, ensuring consistent accuracy for performance tuning and diagnostics.

• DirectDigital Technology: 100% digital wideband technology for superior accuracy and speed.
• Bosch LSU 4.9 Sensor: Includes the industry-standard wideband O2 sensor for reliable readings.
• Dual Analog Outputs: Two 0-5V outputs are fully customizable via LogWorks software.
• Modular Tuning System (MTS): Serial digital I/O allows for daisy-chaining with other Innovate devices for individual cylinder monitoring.
• Self-Calibrating: Automatic compensation for temperature, altitude, and sensor condition.

Kit Includes: LC-2 Controller, Bosch LSU 4.9 Wideband O2 Sensor, 3ft Sensor Cable, 1-inch Mild Steel Weld-in Bung, Serial Program Cable, and Quick Start Guide.

The Innovate Motorsports LC-2 (MPN 3881) is a 100% digital wideband air/fuel ratio controller built on patented DirectDigital signal processing technology. It provides precise, real-time data on engine richness or leanness under any load condition, making it an essential tool for tuning standalone ECUs, data acquisition systems, and dynamometers.

This unit features self-calibrating circuitry that automatically compensates for changes in ambient temperature, altitude, and sensor condition. With two fully programmable analog outputs and a digital input/output, the LC-2 integrates seamlessly into existing performance setups and can be daisy-chained for individual cylinder monitoring through the Innovate Modular Tuning System (MTS).

• Patented DirectDigital signal processing for high-speed accuracy
• Includes 8ft cable for flexible mounting and routing
• Two 0-5V fully programmable analog outputs
• Self-calibrating circuitry compensates for temperature and altitude
• Fully compatible with LogWorks analysis software and MTS
• Manufacturer Part Number: 3881

The Innovate Motorsports LC-2 (MPN 3877) is an advanced digital wideband air/fuel ratio controller built on the legacy of the LC-1. Utilizing patented DirectDigital signal processing, this controller provides precise real-time data on engine richness or leanness across all load ranges. The LC-2 features self-calibrating circuitry that automatically compensates for fluctuations in temperature, altitude, and sensor wear, ensuring consistent accuracy for tuning and data acquisition.

Designed for versatile integration, the LC-2 is ideal for use with dynamometers, standalone ECUs, and digital gauges. Its modular design allows for daisy-chaining multiple units for individual cylinder monitoring through the Innovate Modular Tuning System (MTS).

• Patented 100% digital wideband air/fuel ratio technology
• Two fully programmable analog outputs for gauges and ECUs
• Digital input/output for integration with LogWorks software and MTS devices
• Self-calibrating circuitry for environmental and sensor compensation
• Real-time data logging capabilities via PC-based LogWorks software
• Manufacturer Part Number: 3877

The Innovate Motorsports DB-Green Gauge and LC-2 Wideband Kit provides a complete solution for precise air/fuel ratio (AFR) monitoring. Built around the patented LC-2 digital wideband controller, this kit offers the speed and accuracy required for professional engine tuning. The 52mm (2 1/16-inch) gauge features a high-brightness green LED display, providing clear visibility for real-time monitoring of your engine's combustion efficiency.

This system utilizes a Bosch 5-wire wideband O2 sensor for high-speed data acquisition. It is fully compatible with the Innovate Modular Tuning System (MTS), allowing users to expand their setup with multi-sensor interfaces or log data directly to a PC. The included LogWorks software provides a powerful platform for analyzing wideband data alongside parameters from piggyback controllers or standalone ECUs.

• Patented LC-2 Wideband Controller for superior digital accuracy
• 52mm (2 1/16-inch) diameter gauge with bright green LED display
• Bosch 5-wire wideband O2 sensor and weld-in bung included
• Compatible with Innovate MTS for daisy-chaining sensors
• Synchronous high-speed logging via LogWorks software
• Manufacturer Part Number: 3873

Kit Includes: DB-series gauge, LC-2 wideband controller, Bosch O2 sensor, mild steel weld-in bung, serial cable, and installation instructions.

The Innovate MTX-AL series (MPN 3855) combines the classic aesthetics of an analog gauge with the precision of 100% digital wideband technology. Utilizing patented DirectDigital™ signal processing, this gauge provides real-time air/fuel ratio (AFR) data with superior speed and accuracy compared to traditional analog setups. It is designed for high-performance environments, featuring a microprocessor-driven, high-torque 270-degree stepper motor that maintains needle stability under extreme shock and vibration.

• Patented DirectDigital™ wideband sensor control for maximum response speed
• High-performance 270-degree stepper motor with superior needle holding force
• User-calibratable Bosch LSU 4.9 wideband O2 sensor for long-term accuracy
• Innovate MTS serial in/out for seamless integration with data loggers and other MTX gauges
• Customizable appearance with interchangeable black and silver bezels included

The kit includes everything needed for a complete installation: the MTX-AL gauge, black and silver bezels, a Bosch LSU 4.9 wideband O2 sensor, an 8-foot sensor cable, a weld-in exhaust bung, a serial programming cable, and the installation manual.

Monitor critical engine thermal data with the Innovate Motorsports MTX-D Digital Exhaust Gas Temperature (EGT) Gauge Kit (MPN 3854). This 2-1/16 inch (52mm) digital gauge provides precise real-time EGT readings, an essential metric for tuning air-fuel ratios and protecting internal components from excessive heat during high-load operation.

Part of the MTX Digital Series, this gauge features a water-resistant casing and utilizes Innovate’s Modular Tuning System (MTS). The MTS serial connections allow the gauge to daisy-chain with other Innovate devices, enabling comprehensive data logging. The kit is designed for a professional, secure installation with locking connectors that resist vibration-induced disconnects.

• Customizable Look: Includes interchangeable silver and black bezels along with white and black faceplates to match your vehicle’s interior.
• High-Accuracy Sensing: Features a professional-grade K-Type EGT thermocouple probe for rapid response times.
• MTS Connectivity: Simplified serial integration for logging data to a PC or other Innovate hardware.
• Simplified Installation: Features locking connectors and includes a weld-in bung for the EGT probe.

Kit Includes: MTX Digital Gauge (3854), silver and black bezels, white and black faceplates, program cable, EGT K-Type probe, EGT mounting hardware with bung, and a Quick Start installation guide.

The Innovate Motorsports MTX Digital Series Dual Function Gauge (MPN 3853) allows for simultaneous monitoring of two critical engine parameters within a single 52mm (2 1/16 inch) housing. This kit provides precise digital readouts for water temperature and battery voltage, helping to protect your engine and electrical system from unexpected failure.

Engineered for professional integration, the MTX series utilizes locking connectors to ensure secure wiring in high-vibration environments. It features the Innovate MTS (Modular Tuning System) serial connection, allowing the gauge to be daisy-chained with other MTS-compatible devices for comprehensive data logging. The unit is fully customizable with included interchangeable faceplates and bezels to match your vehicle's cockpit.

• Functions: Water Temperature and Battery Voltage (Volts)
• Gauge Diameter: 52mm (2 1/16")
• Data Logging: MTS Serial In/Out for connection to LogWorks or other devices
• Customization: Includes black and white faceplates with black and silver bezels
• Installation: Locking connectors for simplified, secure wiring
• Manufacturer Part Number: 3853

Kit Includes: MTX Dual Function Gauge, black faceplate and bezel (pre-installed), white faceplate, silver bezel, serial programming cable, water temperature thermistor, and quick start installation guide.

The Innovate Motorsports MTX Digital Series Dual Function gauge integrates a high-performance vacuum/boost display and a programmable shift light into a single 2-1/16" (52mm) unit. This all-in-one solution is designed for forced induction applications where monitoring manifold pressure and precise shift timing are critical for performance and engine safety.

Built with durability in mind, the MTX series features locking connectors to ensure secure wiring under high-vibration conditions and MTS serial connections for seamless integration with other Innovate data-logging devices. The kit includes a high-accuracy 4-Bar MAP sensor, allowing for precise pressure readings from vacuum up to significant boost levels.

• Dual Functionality: Real-time digital vacuum/boost monitoring and an integrated, user-programmable shift light.
• Customizable Aesthetics: Includes both black and silver bezels and white and black faceplates to match your vehicle's interior.
• Data Logging Ready: MTS Serial In/Out allows connection to LogWorks software or other Innovate modules.
• Kit Includes: 52mm Gauge (3851), Black/Silver Bezels, White/Black Faceplates, Program Cable, 4-Bar MAP Sensor, MAP Accessory Kit (T-fitting, hose, zip ties), 6-inch RPM Harness, and Installation Guide.

The Innovate Motorsports 38500 K-Type thermocouple probe provides precise exhaust gas temperature (EGT) monitoring for high-performance tuning applications. This sensor is designed to integrate seamlessly with Innovate data logging and interface systems that feature dedicated thermocouple channels.

Engineered for durability in high-heat environments, the kit includes a high-grade stainless steel weld-in fitting and bung for a secure installation in the exhaust manifold or downpipe. The 6-foot lead wire ensures flexible routing from the engine bay to your data hub or gauge interface.

• Compatible with Innovate TC-4 PLUS, LMA-3, DL-32, and TC-4 units
• Includes stainless steel weld-in fitting and bung
• 6-foot lead wire with standard Type-K connector
• Designed for precision EGT data acquisition and engine safety
• Manufacturer Part Number: 38500

The Innovate Motorsports 4ft 4-Pin to 4-Pin Serial Patch Cable (MPN 3846) provides a reliable connection for your data logging and air/fuel ratio monitoring setup. This cable is specifically designed to interface or daisy-chain compatible Innovate devices, ensuring clean signal transmission between your wideband controllers and digital gauges.

• Direct replacement or expansion cable for Innovate Motorsports systems
• Compatible with LM-2, LC-2, and MTX series gauges and controllers
• Standard 4-pin to 4-pin serial connectors for secure data transfer
• 4-foot length allows for flexible routing behind the dash or through the firewall
• Manufacturer Part Number: 3846

Ensure consistent and accurate air/fuel ratio readings with this 3-foot replacement sensor cable from Innovate Motorsports. This cable (MPN 3843) is designed to provide a secure, high-integrity connection between your wideband oxygen sensor and your Innovate tuning hardware. It is specifically compatible with the LM-2 handheld controller and MTX-L series digital air/fuel ratio gauges.

Built to handle the heat and vibration of performance automotive environments, this cable features ruggedized connectors to prevent signal dropouts during critical tuning or data logging sessions. Users can verify their specific sensor type and configuration by connecting their device to the Innovate LM Programmer software utility.

• Length: 3 Feet
• Compatibility: Innovate Motorsports LM-2 and MTX-L Series
• Manufacturer Part Number: 3843
• Application: Connects wideband O2 sensor to gauge or controller

The Innovate Motorsports 3840 Serial Program Cable provides the essential link between your vehicle's electronics and your PC. This high-quality serial interface allows you to configure gauge settings, calibrate sensors, and perform firmware updates on your Innovate digital air/fuel controllers and secondary gauges.

By connecting to your computer's serial port (or a serial-to-USB adapter), you can access the full suite of configuration options within the LogWorks software. This is required for setting up custom warning triggers, analog output scaling, and ensuring your hardware is running the latest manufacturer software for peak accuracy.

• Enables PC connectivity for configuration and firmware updates
• Compatible with MTX Series Gauges
• Compatible with LM-2, LC-2, and SCG-1 controllers
• Compatible with PSB-1 and PSN-1 PowerSafe gauges
• Essential for utilizing LogWorks software features
• Manufacturer Part Number: 3840

The Innovate Motorsports LM-2 Basic Kit (MPN 3837) is a professional-grade tuning tool that combines a precision air/fuel ratio meter with a comprehensive 32-channel datalogger. Engineered for tuners working with everything from race carburetors and piggy-back controllers to standalone ECUs and OBD-II software, the LM-2 provides the critical data needed to optimize horsepower and engine safety. Utilizing award-winning digital signal processing (DSP) technology, this unit delivers exceptionally fast and accurate A/F ratio data under any load.

• Patented DirectDigital signal processing for high-speed air/fuel ratio data.
• Self-calibrating circuitry compensates for changes in temperature, altitude, and sensor condition.
• Two fully programmable linear analog outputs to interface with dyno computers, ECUs, and external gauges.
• Four fully-differential analog inputs for logging additional sensors.
• Includes LM Programmer software for user-defined output mapping.
• Manufacturer Part Number: 3837

Note: This is the Basic Kit and does not include an SD card for internal datalogging.

The Innovate Motorsports Inductive RPM Clamp (MPN 3834) is a precision diagnostic accessory designed to capture engine speed data during tuning and logging sessions. By clamping directly onto a spark plug wire, this sensor provides a reliable RPM signal without requiring invasive wiring or tapping into the vehicle's electrical harness.

This inductive pickup is engineered for seamless integration with the Innovate LM-2 Air/Fuel Ratio Meter, as well as the LMA-2, LMA-3, and DL-32 multi-sensor interfaces. The included 6-foot cable provides the necessary reach to route from the engine compartment to your data logger or laptop interface inside the vehicle cabin.

• Product Type: Inductive RPM Pickup Clamp
• Manufacturer Part Number: 3834
• Cable Length: 6 Feet (1.8m)
• Compatibility: Innovate LM-2, LMA-2, LMA-3, and DL-32 digital data loggers
• Installation: Clamps to spark plug wire for non-invasive signal pickup

The Innovate Motorsports LM-2 Suction Cup Window Mount provides a secure, hands-free solution for monitoring critical data during street tuning or dyno sessions. This heavy-duty mount attaches directly to the interior of your windshield, positioning the LM-2 display within your line of sight to allow for safer, more efficient air/fuel ratio monitoring while driving.

• Designed specifically for the Innovate Motorsports LM-2 digital air/fuel ratio meter
• Industrial-strength suction cup ensures a stable hold on glass surfaces
• Adjustable cradle allows for optimal viewing angles while tuning
• Replaces the need for temporary or unsecured device placement during data logging
• Manufacturer Part Number: 3814

The Innovate Motorsports Serial Patch Cable (MPN 3812) bridges the connection between different generations of digital tuning hardware. This adapter allows you to mate the newer-style Molex 4-pin serial connector to the legacy 2.5mm ports used on previous-generation Innovate modules, ensuring your entire data acquisition chain remains functional.

Specifically designed for daisy-chaining multiple devices, this cable allows you to link several modules together for comprehensive data logging or real-time viewing within the LogWorks software environment. It provides a secure, low-latency connection for critical engine data transmission.

• Interface: Molex 4-Pin to 2.5mm Serial
• Application: Connects newer serial devices to legacy Innovate modules
• Compatibility: Replaces or connects LC-1, LMA-3, DL-32, SSI-4, and TC-4 units to LM-2 systems
• Software: Fully compatible with Innovate Motorsports LogWorks software
• Part Number: 3812

The Innovate Motorsports 8-foot sensor cable (MPN 3810) is a direct-fit replacement component designed to bridge the connection between your wideband oxygen sensor and the air/fuel ratio controller. Engineered specifically for the Innovate LM-2 handheld tuner and MTX-L digital series gauges, this cable ensures precise data transmission for critical engine tuning and monitoring.

• Compatible with Innovate LM-2 and MTX-L wideband systems
• Length: 8 feet (2.44 meters) for flexible routing through firewalls and chassis
• Durable shielding to protect signal integrity from engine bay heat and EMI
• Terminated with high-quality connectors for a secure, moisture-resistant fit
• Manufacturer Part Number: 3810

This cable allows for seamless integration with your existing wideband setup. For users unsure of their hardware configuration, sensor type and compatibility can be confirmed by connecting your Innovate device to the LM Programmer software utility.

The Innovate Motorsports OBD-II / CAN Interface Accessory Cable (3809) expands the data-logging capabilities of your LM-2 Digital Air/Fuel Ratio Meter. By connecting your LM-2 directly to the vehicle's diagnostic port, this cable allows you to capture and sync critical ECU data—such as RPM, throttle position (TPS), manifold pressure (MAP), and ignition timing—alongside your wideband oxygen sensor readings.

This hardware interface is essential for tuners and technicians who need to analyze fueling performance relative to specific engine loads and operating conditions. The high-quality cable ensures a reliable connection to standard OBD-II and CAN protocols for consistent data streaming during street or dyno tuning sessions.

• Direct connection between Innovate LM-2 and vehicle OBD-II port
• Enables logging of up to 16 OBD-II/CAN parameters simultaneously
• Synchronizes ECU sensor data with wideband air/fuel ratio readings
• Compatible with all Innovate Motorsports LM-2 Wideband kits
• Manufacturer Part Number: 3809

The Innovate LM-2 Pro-V (MPN 3807) combines a precision air/fuel ratio meter with a full-function 32-channel datalogger to provide a complete tuning solution. Built for professional-grade diagnostics, it works with carbureted engines, aftermarket ECUs, and OBD-II equipped vehicles to dial in maximum horsepower. The unit utilizes patented digital signal processing (DSP) technology to provide accurate data on exactly how rich or lean an engine is running at any load.

Equipped with self-calibrating circuitry, the LM-2 automatically compensates for changes in temperature, altitude, and sensor condition to maintain accuracy. It features four fully-differential analog inputs and two fully programmable linear analog outputs, allowing you to connect to external gauges, dyno computers, or piggyback controllers via the included LM Programmer software.

• Dual-channel wideband air/fuel ratio monitoring
• OBD-II scan tool functionality: read and clear DTCs and log engine data
• 32-channel internal datalogging capability
• Patented DirectDigital signal processing technology
• Self-calibrating circuitry for temperature and altitude compensation
• Two programmable 0-5V linear analog outputs
• Four fully-differential analog inputs for external sensors
• Manufacturer Part Number: 3807

The Innovate Motorsports LM-2 (MPN 3806) is a comprehensive tuning solution that combines a wideband air/fuel ratio meter, a full-function 32-channel datalogger, and OBD-II diagnostic capabilities. Utilizing patented DirectDigital signal processing, the LM-2 provides highly accurate data on exactly how rich or lean an engine is running at any load, making it an essential tool for tuning carburetors, piggy-back controllers, or aftermarket ECUs.

• Patented DirectDigital signal processing for high-speed, accurate AFR measurement.
• Integrated OBD-II scan tool functionality to read/clear DTCs and log engine data.
• Self-calibrating circuitry compensates for changes in temperature, altitude, and sensor condition.
• Two fully programmable linear analog outputs to connect to gauges, dyno computers, or ECUs.
• Four fully-differential analog inputs for auxiliary sensors.
• Includes LM Programmer software for user-defined output configuration and data analysis.

The Innovate Motorsports DB-Red Wideband Air/Fuel Ratio Gauge Kit provides a precise, cost-effective solution for real-time engine monitoring. This 52mm (2-1/16") gauge features a high-brightness red LED display, ensuring critical AFR data is visible at a glance. At the heart of the system is the patented LC-2 Wideband Controller, which provides a 100% digital signal to ensure maximum response speed and accuracy compared to older analog systems.

This kit is fully compatible with the Innovate Modular Tuning System (MTS), allowing you to daisy-chain additional sensors or log 32 channels of data directly to a PC or SD card using the included LogWorks software. Whether you are tuning a street car or a dedicated race engine, the DB-Red kit offers the data acquisition capabilities needed to optimize fuel maps and protect your engine.

• Gauge Type: 52mm (2-1/16") diameter with bright red LED readout.
• Controller: Patented LC-2 Wideband Controller for ultra-fast response times.
• Sensor: Includes a Bosch 5-wire wideband O2 sensor and weld-in bung.
• Connectivity: Serial in/out ports for high-speed data logging and MTS integration.
• Software: Includes LogWorks engine-tuning software for synchronous data analysis.
• MPN: 3796

Includes: DB-Red gauge, LC-2 wideband controller, Bosch O2 sensor, weld-on bung, serial cable, and installation instructions.

The Innovate Motorsports DB-Blue kit (MPN 3795) provides a complete, cost-effective solution for precision air/fuel ratio (AFR) monitoring. This universal 52mm (2 1/16 inch) gauge features a high-brightness blue LED display designed for clear visibility in various lighting conditions. At the core of this system is the patented DirectDigital LC-2 Wideband Controller, which provides faster and more accurate data than conventional analog wideband controllers.

Built for tuners and performance enthusiasts, the DB series utilizes the Modular Tuning System (MTS), allowing users to daisy-chain additional sensors or connect to a PL-1 data logger for comprehensive engine analysis. The included LogWorks software supports high-speed synchronous logging of wideband data alongside other MTS sensors or factory OBD2 ECU data via a PC or laptop.

• 52mm (2 1/16") DB-Blue LED air/fuel ratio gauge
• LC-2 Wideband Controller with patented DirectDigital technology
• Bosch 5-wire wideband O2 sensor for precision accuracy
• Mild steel weld-in sensor bung
• Serial cable for PC connectivity and MTS daisy-chaining
• LogWorks engine-tuning software (free download)
• Part Number: 3795

The Innovate Motorsports DB-series digital air/fuel ratio gauge provides a cost-effective and highly visible monitoring solution for tuners and performance enthusiasts. This 52mm (2 1/16-inch) gauge features a high-brightness red LED display designed for quick reference during high-performance driving or tuning sessions.

This unit is a standalone display designed to integrate seamlessly with existing Innovate Motorsports wideband lambda controller kits. It is a precise monitoring option for users who already have a compatible wideband sensor and controller setup.

• Display Type: High-brightness digital red LED
• Gauge Diameter: 52mm (2 1/16")
• Compatibility: Specifically for use with Innovate LC-1, LC-2, LM-1, or LM-2 lambda controller kits
• Mounting: Standard size fits most aftermarket gauge pods or pillar mounts
• Manufacturer Part Number: 3794
• Included Hardware: DB-series gauge, mounting hardware, and quick-start guide

Reliable data logging requires storage media that is fully compatible with your hardware's specific file system and write speed requirements. This 1GB SD card is specifically tested and approved by Innovate Motorsports for use with their range of digital gauges and data acquisition systems.

Many high-capacity SDHC or SDXC cards can cause initialization errors or data corruption in specialized automotive electronics. Using this verified 1GB card ensures your air/fuel ratio data and sensor logs are recorded accurately and remain accessible for tuning and analysis.

• Capacity: 1GB
• Format: Standard SD
• Manufacturer Part Number: 3787
• Verified for compatibility with Innovate Motorsports hardware

The Innovate Motorsports Serial Program Cable (MPN 3746) provides a direct communication link between your PC and your Innovate data logging or air/fuel ratio devices. This cable is essential for configuring device settings, performing firmware updates, and viewing real-time data on your computer.

Designed for professional tuners and DIY enthusiasts alike, this serial interface ensures stable data transfer for precise calibration of your vehicle's electronics. It features a high-quality 2.5mm plug on one end and a DB9 serial connector on the other.

Compatible Innovate Motorsports Devices:

• LC-1 Digital Wideband Controller
• XD-16 Dash Mount Digital Display
• LMA-3 Multi-Sensor Aux Box
• DL-32 Multi-Channel Data Logger
• SSI-4 Sensor Stack Interface
• TC-4 4-Channel Thermocouple Interface

Note: If your computer does not have a native DB9 serial port, a high-quality USB-to-Serial adapter (sold separately) is required to complete the connection.

The Innovate Motorsports 3733 USB-to-Serial Adapter provides a reliable data connection between modern computers and Innovate tuning hardware. This cable is specifically engineered to bridge the gap for laptops lacking a native DB9 serial port, allowing for seamless communication with wideband controllers and data loggers.

Designed for stability during high-speed data logging, this adapter ensures your PC can interface correctly with Innovate’s proprietary software suites. It is a critical component for users performing real-time tuning, data analysis, or firmware updates on supported devices.

• Software Integration: Recommended for use with LM Programmer and LogWorks software suites.
• Connectivity: Converts standard Serial DB9 to USB interface.
• Hardware Drivers: Included for standard setup and configuration.
• Operating System Compatibility: Supports Windows 98 SE, ME, 2000, XP, Vista (32/64-bit), Windows 7, and Windows 8 (with latest driver download).
• Manufacturer Part Number: 3733

The Innovate Motorsports 4 BAR MAP (Manifold Absolute Pressure) Sensor is a high-precision component designed specifically for integration with MTX-D and SCG-1 series digital gauges. This sensor is an essential upgrade or replacement for high-performance forced induction builds, providing the resolution and range necessary to monitor manifold pressure accurately under high-load conditions.

With its 4-bar rating, this sensor handles a total pressure range sufficient for monitoring up to approximately 43.5 psi of boost (beyond atmospheric pressure). It is built to withstand the heat and vibration of the engine bay, ensuring a stable signal for your gauge or boost controller to maintain engine safety and tuning accuracy.

• Compatible with Innovate MTX-D Vacuum/Boost gauges and SCG-1 Solenoid Boost Controllers
• 4 Bar pressure range (supports up to 43.5 psi of boost)
• Provides critical manifold pressure data for accurate boost management
• Rugged construction with a secure 3-pin connector interface
• Manufacturer Part Number: 15-0048

The Innovate Motorsports DB Series Gauge Replacement Hardware Kit (MPN 12-0034) is designed to restore a secure mounting solution for your digital DB-series gauges. This kit provides the specific hardware needed to replace lost or damaged components, ensuring your gauge remains stable within its mounting pod or dashboard bracket during high-performance driving.

• Direct replacement for original Innovate DB series gauge hardware
• Engineered for a precise fit and vibration resistance
• Essential for new gauge pod installations or relocating existing gauges
• Genuine Innovate Motorsports component (MPN: 12-0034)