This Part Fits:

This Part Fits:

This Part Fits:

This Part Fits:

This Part Fits:

This Part Fits:

This Part Fits:

A failing lift or fuel supply pump will not only cause sub-standard performance, it can cause costly damage to the injection pump. Keep tabs on your truck's fuel system with the BD low fuel pressure LED kit, which incorporates a red or amber LED that illuminates if lift pump pressure falls below spec. Inexpensive protection and easy installation!

• Red LED that illuminates if lift pump pressure falls below spec
• Red LED Illuminates If Lift Pump Pressure Falls Below Spec
• Inexpensive protection and easy installation!
• Inexpensive Protection And Easy Installation
• Keep tabs on your truck's fuel system
• Keep Tabs On Your Trucks Fuel System
• 12 Month Or 12000 Mile Warranty

This Part Fits:

A Throttle position sensor or TPS sensor is a sensor used by the cars ECU to monitor the throttle position on modern fuel injected cars. The sensor is usually located on the butterfly spindle or shaft so that it can directly monitor the position of the throttle for proper fuel delivery and ignition etc. BBK Performance supplies a new throttle position sensor on most of their throttle bodies but if you have a stock or even aftermarket TPS sensor that is suspect and needs replacing then these direct replacement BBK Performance throttle position sensors are what you need to get your car running properly again. Works on 65-70-75-80mm Throttle bodies

• Direct Replacement For Factory OE or Aftermarket Throttle Bodies
• Made In The USA

This Part Fits:

When you install a set of BBK Performance long tube exhaust headers on your muscle car or truck the O2 sensors are relocated on the header that is no longer in the factory location and the factory O2 sensor connectors will not reach to connect any longer.. These extension harnesses are a must when Installing Full Length Headers - All harnesses feature OEM Factory connectors to allow simple plug in installation to the factory wire harness so that the relocation is super simple and does not require any splicing of the factory harness at all. (Sold in Pairs)Locator Tabs:Because factory connectors vary, some connectors may require the small directional location tabs to be removed from the ends of the connectors to click into place. The tabs can be easily cut or filed off.

• Direct Fit OE STYLE Connectors - Recommended When Installing Long Tube Exhaust Headers And Mid Pipes
• Made In The USA

This Part Fits:

When you install a set of BBK Performance long tube exhaust headers on your muscle car or truck, the O2 sensor locations are relocated on the BBK header and mid pipe. The factory O2 sensor wire connectors will not be long enough to connect to the sensors any longer.. These extension harnesses extend the length needed and allow them to now connect easily - All our extension harnesses feature OEM Factory connectors to allow simple plug in installation to the factory wire harness so that the relocation is super simple and does not require any splicing of the factory harness at all. (Sold in Pairs)

• OEM connectors and heat protective sleeves make installation a snap. Simply transfer your factory oxygen sensors to the new location in the collector and click these into place on the OEM harness.
• Made In The USA

This Part Fits:

When you install a set of BBK Performance long tube exhaust headers on your muscle car or truck, the O2 sensor locations are relocated on the BBK header and mid pipe. The factory O2 sensor wire connectors will not be long enough to connect to the sensors any longer.. These extension harnesses extend the length needed and allow them to now connect easily - All our extension harnesses feature OEM Factory connectors to allow simple plug in installation to the factory wire harness so that the relocation is super simple and does not require any splicing of the factory harness at all. (Sold in Pairs)

• OEM connectors and heat protective sleeves make installation a snap. Simply transfer your factory oxygen sensors to the new location in the collector and click these into place on the OEM harness.
• Made In The USA

This Part Fits:

When you install a set of BBK Performance long tube exhaust headers on your muscle car or truck, the O2 sensor locations are relocated on the BBK header and mid pipe. The factory O2 sensor wire connectors will not be long enough to connect to the sensors any longer.. These extension harnesses extend the length needed and allow them to now connect easily - All our extension harnesses feature OEM Factory connectors to allow simple plug in installation to the factory wire harness so that the relocation is super simple and does not require any splicing of the factory harness at all. (Sold in Pairs)

• OEM connectors and heat protective sleeves are used to make installation a snap. Simply transfer your factory oxygen sensors to the new O2 sensor location in the collectors and click these into place on the OEM harness.
• Sold In Pairs

This Part Fits:

When you install a set of BBK Performance long tube exhaust headers on your muscle car or truck, the O2 sensor locations are relocated on the BBK header and mid pipe. The factory O2 sensor wire connectors will not be long enough to connect to the sensors any longer.. These extension harnesses extend the length needed and allow them to now connect easily - All our extension harnesses feature OEM Factory connectors to allow simple plug in installation to the factory wire harness so that the relocation is super simple and does not require any splicing of the factory harness at all. (Sold in Pairs)

• BBK Performance oxygen sensor extensions feature OEM Factory connectors on the end of the wiring to allow simple plug in installation to the factory wire harness. Includes a heat protective sleeve for maximum protection.
• Made In The USA

This Part Fits:

All BBK Performance parts are backed by a 1-YEAR manufacturer’s warranty from the original date of purchase. An optional extended warranty is also available - giving you an additional 2 or 3 years from original date of purchase. Costs for the extended warranty option can be viewed when the item is added to your cart. The manufacturer’s warranty is based on normal use and installation of each product.

• BBK Performance oxygen sensor extensions feature OEM Style connectors on the end of the wiring to allow simple plug in installation to the factory wire harness. Heat protective sleeve for maximum protection also Included.
• Made In The USA

This Part Fits:

All BBK Performance parts are backed by a 1-YEAR manufacturer’s warranty from the original date of purchase. An optional extended warranty is also available - giving you an additional 2 or 3 years from original date of purchase. Costs for the extended warranty option can be viewed when the item is added to your cart. The manufacturer’s warranty is based on normal use and installation of each product.

• BBK Performance oxygen sensor extensions feature OEM Style connectors on the end of the wiring to allow simple plug in installation to the factory wire harness. Include heat protective sleeve for maximum protection.
• Made In The USA

This Part Fits:

All BBK Performance parts are backed by a 1-YEAR manufacturer’s warranty from the original date of purchase. An optional extended warranty is also available - giving you an additional 2 or 3 years from original date of purchase. Costs for the extended warranty option can be viewed when the item is added to your cart. The manufacturer’s warranty is based on normal use and installation of each product.

• Direct Fit OE Style Connectors Includes Heat Protective Wrap
• Sold In Pairs

This Part Fits:

All BBK Performance parts are backed by a 1-YEAR manufacturer’s warranty from the original date of purchase. An optional extended warranty is also available - giving you an additional 2 or 3 years from original date of purchase. Costs for the extended warranty option can be viewed when the item is added to your cart. The manufacturer’s warranty is based on normal use and installation of each product.

• BBK Performance oxygen sensor extensions feature OEM Style Factory connectors on the end of the wiring to allow simple plug in installation to the factory wire harness.
• Made In The USA

This Part Fits:

All BBK Performance parts are backed by a 1-YEAR manufacturer’s warranty from the original date of purchase. An optional extended warranty is also available - giving you an additional 2 or 3 years from original date of purchase. Costs for the extended warranty option can be viewed when the item is added to your cart. The manufacturer’s warranty is based on normal use and installation of each product.

• BBK O2 extensions use OEM style connectors and heat protective sleeves to make installation a snap. Some connectors may require the small directional location tabs to be removed from the ends of the connectors to click into place.
• Made In The USA

This Part Fits:

All BBK Performance parts are backed by a 1-YEAR manufacturer’s warranty from the original date of purchase. An optional extended warranty is also available - giving you an additional 2 or 3 years from original date of purchase. Costs for the extended warranty option can be viewed when the item is added to your cart. The manufacturer’s warranty is based on normal use and installation of each product.

• BBK O2 extensions use OEM connectors and heat protective sleeves make installation a snap. Some connectors may require the small directional location tabs to be removed from the ends of the connectors to click into place.
• Made In The USA

This Part Fits:

Bracket kit for Banks Derringer Tuners or Sensor Modules. Used to securely mount one or more modules to a flat surface. Recommended number of brackets: 1-2 modules use 1 bracket, 3-4 modules use 2 brackets, 4-5 modules use 3 brackets, 5+ modules use 4 brackets. Note: These are not used for iDash or 52mm gauges.

• Securely Mount Banks Sensor Modules

Engineered Performance. Easy-to-Read DynaFact Mechanical Gauges. Pyrometer to track EGTs. Boost gauge to monitor power and turbo performance. LED backlit. Includes 2-gauge mounting panel. 1-Year Limited Warranty. Banks exclusive DynaFact gauges offer precision that can't be matched. The pyrometer provides exhaust-gas temperature (EGT) measurements that are accurate within +/-15 Degree Fahrenheit at maximum operating temperatures. The pyro spring-loaded, jeweled movement is resistant to vibration and sports a lit, easy-to-read 0-1500 Degree Fahrenheit face. Banks 0-50 psi boost gauge monitors power and turbo performance. Includes 2-gauge mounting panel. Top-mount and/or pillar-mount options available. Instrument Assembly, Pyrometer and Boost gaugeKey Features: Superior Precision & Durability. Engineered Performance. Easy-to-Read DynaFact Mechanical Gauges. Pyrometer to track EGTs. Boost gauge to monitor power and turbo performance. LED backlit. Includes 2-gauge mounting panel. 1-Year Limited Warranty

• Superior Precision & Durability
• 1-Year Limited Warranty

This Part Fits:

iDash®Stealth Pods are direct-fit gauge mounts that affix to your late 2018-2023 Jeep JL and 2020-2023 Gladiator factory A-pillar grab handle while concealing wires for a factory look. Each pod securely mounts to the top of the grab handle while being angled to enhance gauge viewing and ergonomics.Proudly made in the USA from industrial-grade polymer, iDash Stealth Pods can be installed in minutes and are built to last the life of your truck through hot summer days or cold winter nights. Each Stealth Pod ships in a natural black finish and can be painted by you to color-match your interior. Vehicle-specific grab handle mount designed to work with the low profile nature of the iDash®. Ergonomically designed with an optimized viewing angle that is closer to the driver for enhanced visibility. Stealth Pods hide wiring for a clean install and can be painted to match OEM interior colors. NOTE: iDash®Gauge not included. Fitment for non iDash® gauges is not guaranteedWhy It's Better. The Perfect Gauge PodWith a simple, clean look, the iDash® Stealth Pod is the perfect mount solution for 52mm iDash® gauges and is engineered to withstand, heat, cold, and UV exposure for the life of your vehicle. Press-and-go friction fit requires no screws or tape to mount the iDash®— just slide in your gauge, and twist to clock it level. Jeep pods use a unique orientation to improve the viewing angle while minimizing eye movement while driving. View all the information you need at a glance, while simultaneously displaying vehicle parameters, Derringer, or PedalMonster controls.Key Features: Designed specifically for Banks iDash. Optimized gauge face orientation. Retains Factory Grab Handle. OE Grade Polyamide-12 construction, durable to last life of truck. Premium Textured Exterior Finish

• Retains factory grab handle

This Part Fits:

iDash®Stealth Pods are direct-fit gauge mounts that affix to your late 2022-2026 GM 1500's and 2024-2026 2500/3500 factory A-pillar grab handle while concealing wires for a factory look. Each pod securely mounts to the body of the truck while being angled to enhance gauge viewing and ergonomics. Proudly made in the USA from industrial-grade polymer, iDash Stealth Pods can be installed in minutes, and are built to last the life of your truck through hot summer days or cold winter nights. Each Stealth Pod ships in a natural black finish and can be painted by you to color-match your interior. Vehicle-specific grab handle mount designed to work with the low profile nature of the iDash®. Ergonomically designed with an optimized viewing angle that is closer to the driver for enhanced visibility. Stealth Pods hide wiring for a clean install and can be painted to match OEM interior colors.NOTE: iDash®Gauge not included. Fitment for non iDash® gauges is not guaranteedKey Features: Designed for Banks iDash®. Optimized gauge face orientation. Retains Factory Grab Handle. OE Grade Polyamide-12 construction, durable to last life of truck.

• Retains factory grab handle

This Part Fits:

iDash®Stealth Pods are direct-fit gauge mounts that affix to your factory 2015-2020 F150 and 2017-2022 Super Duty A-pillar grab handle while concealing wires for a factory look. Each pod securely mounts to the body of the truck while being angled to enhance gauge viewing and ergonomics.Proudly made in the USA from industrial-grade polymer, iDash Stealth Pods can be installed in minutes, and are built to last the life of your truck through hot summer days or cold winter nights. Each Stealth Pod ships in a natural black finish and can be painted by you to color-match your interior.Vehicle-specific grab handle mount designed to work with the low profile nature of the iDash®. Ergonomically designed with an optimized viewing angle that is closer to the driver for enhanced visibility. Stealth Pods hide wiring for a clean install and can be painted to match OEM interior colors. NOTE: iDash® Gauge not included. Fitment for non iDash® gauges is not guaranteed.Key Features: Designed for Banks iDash®. Optimized gauge face orientation. Retains Factory Grab Handle. OE Grade Polyamide-12 construction, durable to last life of truck.

• Retains factory grab handle

This Part Fits:

iDash®Stealth Pods are direct-fit gauge mounts that affix to your 2019-2026 RAM 2500/3500 factory A-pillar grab handle while concealing wires for a factory look. Each pod securely mounts to the body of the truck while being angled to enhance gauge viewing and ergonomics.Proudly made in the USA from industrial-grade polymer, iDash Stealth Pods can be installed in minutes, and are built to last the life of your truck through hot summer days or cold winter nights. Each Stealth Pod ships in a natural black finish and can be painted by you to color-match your interior. Vehicle-specific grab handle mount designed to work with the low profile nature of the iDash. Ergonomically designed with an optimized viewing angle that is closer to the driver for enhanced visibility. Stealth Pods hide wiring for a clean install and can be painted to match OEM interior colors. NOTE: iDash Gauge not included. Fitment for non iDash gauges is not guaranteed.Key Features: Designed for Banks iDash®. Optimized gauge face orientation. Retains Factory Grab Handle. OE Grade Polyamide-12 construction, durable to last life of truck.

• Retains factory grab handle

This Part Fits:

iDash®Stealth Pods are direct-fit gauge mounts that affix to your 2019-2021 1500, 2020-2023 GM 2500/3500 or 2024 2500/3500 Work Truck factory A-pillar grab handle while concealing wires for a factory look. Each pod securely mounts to the body of the truck while being angled to enhance gauge viewing and ergonomics. Proudly made in the USA from industrial-grade polymer, iDash Stealth Pods can be installed in minutes, and are built to last the life of your truck through hot summer days or cold winter nights. Each Stealth Pod ships in a natural black finish and can be painted by you to color-match your interior. Vehicle-specific grab handle mount designed to work with the low profile nature of the iDash®. Ergonomically designed with an optimized viewing angle that is closer to the driver for enhanced visibility. Stealth Pods hide wiring for a clean install and can be painted to match OEM interior colors. NOTE: iDash®Gauge not included. Fitment for non iDash® gauges is not guaranteed.Key Features: Designed for Banks iDash®, Optimized gauge face orientation. Retains Factory Grab Handle. OE Grade Polyamide-12 construction, durable to last life of truck.

• Retains factory grab handle

This Part Fits: