Authorized Brand Dealer
Fulfillment From Multiple U.S. Warehouses
Enthusiast Owned & Supported
Authorized Brand Dealer
Fulfillment From Multiple U.S. Warehouses
Enthusiast Owned & Supported
Authorized Brand Dealer
Fulfillment From Multiple U.S. Warehouses
Enthusiast Owned & Supported
Authorized Brand Dealer
Fulfillment From Multiple U.S. Warehouses
Enthusiast Owned & Supported
Authorized Brand Dealer
Fulfillment From Multiple U.S. Warehouses
Enthusiast Owned & Supported
Authorized Brand Dealer
Fulfillment From Multiple U.S. Warehouses
Enthusiast Owned & Supported
Welcome to Atlus Automotive
Main menu
-
Performance
- Performance
-
Intake & Exhaust
- Intake & Exhaust
- Air Intake Systems
- Cold Air Intakes
- Air Intake Components
- Air Filters
- Air Filters - Drop In
- Air Filters - Direct Fit
- Air Filters - Universal Fit
- Pre-Filters
- Recharge Kits
- OE Replacement Air Intake Components
- Exhaust, Mufflers & Tips
- Catback
- Axle Back
- Muffler
- Tips
- Headers & Manifolds
- Connecting Pipes
- Catalytic Converter Direct Fit
- Catalytic Converter Universal
- Exhaust Collector
- Merge Collectors
-
Engine Upgrades
- Engine Upgrades
- Engine Components
- Camshafts
- Valve Springs, Retainers
- Head Gaskets
- Head Stud & Bolt Kits
- Main Stud & Bolt Kits
- Gasket Kits
- Engine Mounts
- Oil Catch Cans
- Oil Separators
- Throttle Bodies
- Throttle Body Spacers
- Crankshaft Dampers
- Valves
- Piston Rings
- Piston Sets - Forged - 4cyl
- Piston Sets - Cast - 4cyl
- Connecting Rods - 4Cyl
- Rotating Assemblies
- Stroker Kits
-
Turbo & Cooling
-
Fuel, Ignition & Tuning
-
Suspension & Handling
- Suspension & Handling
-
Lowering & Coilovers
-
Arms, Links & Alignment
-
Lift & Off-Road Suspension
-
Chassis & Bracing
-
Wheels & Tires
- Wheels & Tires
-
Wheels
-
Tires
-
Drivetrain & Clutch
-
Brakes
- Brakes
-
Pads & Rotors
-
Brake Kits & Calipers
-
Lines, Fluid & Hardware
-
Exterior & Lighting
- Exterior & Lighting
-
Lighting
-
Exterior Styling
-
Bumpers & Protection
-
Interior & Electronics
- Interior & Electronics
-
Interior Upgrades
-
Gauges & Electronics
-
Audio & Safety
-
Overland & Utility
- Overland & Utility
-
Bed Covers & Bed Gear
-
Steps, Racks & Storage
-
Trail & Towing
-
Maintenance & Garage
- Maintenance & Garage
-
Oil, Fluids & Filters
-
Detailing & Car Care
-
Tools & Fabrication
Your cart
Choose your Location
-
Atlus
1340 Cobb Dr, Unit 1, Eustis, FL 32736
352-234-4458
Mon – Fri: 8:30 am – 4:30 pm
Sat: 9:00 am – 2:00 pm
Sun: Closed
Product Comparison
How they are Different
|
__ __ |
|
|---|---|
| Description |
Description - __ |
| Rating |
Rating - __ |
| Vendor |
Vendor - __ |
| Color |
Color - __ |
|
|
Compare products ( / )
465 products
465 products
Sort by:
- Featured
- Most relevant
- Best selling
- Alphabetically, A-Z
- Alphabetically, Z-A
- Price, low to high
- Price, high to low
- Date, old to new
- Date, new to old
$195.40
The Evolution Of The Worlds Most Popular Stand Alone Digital O2 Sensor Controller, The Innovate Motorsports Lc-2 Builds Upon The Legacy Of The Lc-1 By Adding Simplicity And Leading Edge Technology. The Lc-2 Utilizes 100% Digital Wideband Air/Fuel Ratio Technology On The Market! The Lc-2S Patented Award-Winning Directdigital Signal Processing Technology Provides Data On Exactly How Rich Or Lean An Engine Is Running At Any Load. The Lc-2S Self-Calibrating Circuitry Also Compensates For Changes In Temperature, Altitude, And Sensor Condition. The Lc-2 Includes A Digital Input/Output, 2 Full-Programmable Analog Outputs, And Is Ideal For Applications Such As Dynamometers, Data Acquisition Systems, Standalone Ecus, And Gauges. The Lc-2 Can Also Be Daisy-Chained For Cost-Effective Individual Cylinder Monitoring, And Is Fully Compatible With Our Modular Tuning System (Mts).
Installation Instructions- Real-time display data on screen and/or with powerful LogWorks software
$247.84
The Evolution Of The Worlds Most Popular Stand Alone Digital O2 Sensor Controller, The Innovate Motorsports Lc-2 Builds Upon The Legacy Of The Lc-1 By Adding Simplicity And Leading Edge Technology. The Lc-2 Utilizes 100% Digital Wideband Air/Fuel Ratio Technology On The Market! The Lc-2S Patented Award-Winning Directdigital Signal Processing Technology Provides Data On Exactly How Rich Or Lean An Engine Is Running At Any Load. The Lc-2S Self-Calibrating Circuitry Also Compensates For Changes In Temperature, Altitude, And Sensor Condition. The Lc-2 Includes A Digital Input/Output, 2 Full-Programmable Analog Outputs, And Is Ideal For Applications Such As Dynamometers, Data Acquisition Systems, Standalone Ecus, And Gauges. The Lc-2 Can Also Be Daisy-Chained For Cost-Effective Individual Cylinder Monitoring, And Is Fully Compatible With Our Modular Tuning System (Mts).
Installation Instructions- Real-time display data on screen and/or with powerful LogWorks software
$287.19
The Innovate Motorsports DB gauges are 52mm (2 1/16) air fuel gauges. Each gauge features a bright LED display (available in blue, green, or red). Each Gauge Kit includes the gauge, an LC-2 wideband controller, oxygen sensor, bung, serial cable, and the award-winning LogWorks engine-tuning software. For tuners seeking the most cost-effective way to start monitoring Air/Fuel Ratio, the DB series gauges offer an attractive option, while opening the world of true digital data acquisition and software engine analysis. For example, users can add multi-sensor interfaces, and log 5 critical parameters directly into any PC or laptop. Or they can get a PL-1 data logger for hundreds of hours of 32-channel data logging on an SD card. Best of all, the DB gauges include the powerful LogWorks software for synchronous high-speed logging of wideband data, other MTS sensors, and data from a growing list of piggyback fuel controllers and standalone or factory (OBD2) ECUs. This is the same software used by champion engine builders and racers.
Installation Instructions- Comes complete with the patented award-winning LC-2 Wideband Controller, DB Gauge, Bosch 5-wire Wideband 02 Sensor, Bung, Serial Cable, LogWorks Software (Free Download), and instructions
$339.64
Innovate MTX-AL Series gauges deliver patented DirectDigital wideband sensor control with 100 percent digital wideband air/fuel ratio technology! These microprocessor-driven gauges feature high performance and high-torque 270 degree stepper motors, superior needle holding force for high shock and vibration applications, plus Innovate MTs serial in/out. They come with Bosch LSU 4.9 wideband O2 sensors and offer the ability to calibrate the oxygen sensor for maximum accuracy. Innovate MTX-AL Series gauges also deliver style with interchangeable black and silver bezels.
Installation Instructions- Gauge, Black Bezel, Silver Bezel, LSU 4.9 Wideband O2 Sensor, 8 Ft. Sensor Cable, Exhaust Bung, Program Cable, and Manual.
$274.08
Innovate Motorsports MTX Digital Series Dual Function Gauges are 2 1/16 (52mm) gauges featuring interchangeable faceplates and bezels for a user-customized look, locking connectors for simplified installation, and MTS serial connections used to connect with other Innovate devices for logging.
Installation Instructions- Gauge, Silver Bezel & White Faceplate, Program Cable, EGT K-Type Probe, EGT Mounting Hardware with Bung, Quick Start Installation Guide.
$208.51
Innovate Motorsports MTX Digital Series Dual Function Gauges are 2 1/16 (52mm) gauges featuring interchangeable faceplates and bezels for a user-customized look, locking connectors for simplified installation, and MTS serial connections used to connect with other Innovate devices for logging.
Installation Instructions- KIT INCLUDES: Gauge (Black Faceplate, Black Bezel), Silver Bezel & White Faceplate, Program Cable (Serial), Thermistor, Quick Start Installation Guide.
$221.62
Innovate Motorsports MTX Digital Series Dual Function Gauges are 2 1/16 (52mm) gauges featuring interchangeable faceplates and bezels for a user-customized look, locking connectors for simplified installation, and MTS serial connections used to connect with other Innovate devices for logging.
Installation Instructions- KIT INCLUDES: Gauge (Black Faceplate, Black Bezel), Silver Bezel & White Faceplate, Program Cable (Serial), 4-Bar MAP Sensor, MAP Accessory Kit: T Fitting, Vacuum Hose, and Zip Ties, RPM Harness (6 inch), Quick Start Installation Guide.
$142.94
This Type K thermocouple from Innovate Motorsports may be utilized for monitoring exhaust gas temperatures (EGT) with TC-4 PLUS, LMA-3, DL-32, and TC-4 products equipped with thermocouple channel(s).
- For use with TC-4 PLUS, LMA-3, DL-32, and TC-4 (Innovate products that include a Thermocouple channel)
- Includes: Weld in Stainless Steel fitting & Bung, 6ft wire.
$20.98
$39.35
It is also possible to verify which sensor is currently being used by connecting your Innovate product to the LM Programmer software.
- It is also possible to verify which sensor is currently being used by connecting your Innovate product to the LM Programmer software.
$20.98
$755.66
The Lm-2 Combines An Air/Fuel Ratio Meter, A Full-Function 32-Channel Datalogger, And Powerful Software To Deliver A Complete Tuning Workshop For Less Than The Cost Of One Dyno Day. Whether You Have A Piggy-Back Fuel Controller, Race Carb, Aftermarket Ecu, Odb-Ii Tuning Software, Or A Flash/Chip Programmer, An Lm-2 Is The Tool You Need To Dial In Maximum Hp. The Meters Award-Winning Digital Signal Processing Technology Provides Data On Exactly How Rich Or Lean An Engine Is Running At Any Load. The Lm-2S Self-Calibrating Circuitry Also Compensates For Changes In Temperature, Altitude, And Sensor Condition. The Lm-2 Also Features Two Fully Programmable Linear Analog Outputs To Connect To Analog Gauges, Dyno Computers, Ecus, Piggyback Controllers, And Other Devices With Analog Inputs. With The Provided Lm Programmer Software These Analog Outputs May Also Be Defined By The User.
Installation Instructions- 4 fully-differential analog inputs
$44.59
Inductive Clamp Engine RPM Pickup Accessory for LM-2.
- Cable is 6 feet in length.
$20.98
$66.88
It is also possible to verify which sensor is currently being used by connecting your Innovate product to the LM Programmer software.
- It is also possible to verify which sensor is currently being used by connecting your Innovate product to the LM Programmer software.
$39.35
$1,100.20
The Lm-2 Combines An Air/Fuel Ratio Meter, A Full-Function 32-Channel Datalogger, And Powerful Software To Deliver A Complete Tuning Workshop For Less Than The Cost Of One Dyno Day. Whether You Have A Piggy-Back Fuel Controller, Race Carb, Aftermarket Ecu, Odb-Ii Tuning Software, Or A Flash/Chip Programmer, An Lm-2 Is The Tool You Need To Dial In Maximum Hp. The Meters Award-Winning Digital Signal Processing Technology Provides Data On Exactly How Rich Or Lean An Engine Is Running At Any Load. The Lm-2S Self-Calibrating Circuitry Also Compensates For Changes In Temperature, Altitude, And Sensor Condition. The Lm-2 Also Features Two Fully Programmable Linear Analog Outputs To Connect To Analog Gauges, Dyno Computers, Ecus, Piggyback Controllers, And Other Devices With Analog Inputs. With The Provided Lm Programmer Software These Analog Outputs May Also Be Defined By The User.
Installation Instructions- 4 fully-differential analog inputs
$820.98
The Lm-2 Combines An Air/Fuel Ratio Meter, A Full-Function 32-Channel Datalogger, And Powerful Software To Deliver A Complete Tuning Workshop For Less Than The Cost Of One Dyno Day. Whether You Have A Piggy-Back Fuel Controller, Race Carb, Aftermarket Ecu, Odb-Ii Tuning Software, Or A Flash/Chip Programmer, An Lm-2 Is The Tool You Need To Dial In Maximum Hp. The Meters Award-Winning Digital Signal Processing Technology Provides Data On Exactly How Rich Or Lean An Engine Is Running At Any Load. The Lm-2S Self-Calibrating Circuitry Also Compensates For Changes In Temperature, Altitude, And Sensor Condition. The Lm-2 Also Features Two Fully Programmable Linear Analog Outputs To Connect To Analog Gauges, Dyno Computers, Ecus, Piggyback Controllers, And Other Devices With Analog Inputs. With The Provided Lm Programmer Software These Analog Outputs May Also Be Defined By The User.
Installation Instructions- 4 fully-differential analog inputs
$287.19
The Innovate Motorsports DB gauges are 52mm (2 1/16) air fuel gauges. Each gauge features a bright LED display (available in blue, green, or red). Each Gauge Kit includes the gauge, an LC-2 wideband controller, oxygen sensor, bung, serial cable, and the award-winning LogWorks engine-tuning software. For tuners seeking the most cost-effective way to start monitoring Air/Fuel Ratio, the DB series gauges offer an attractive option, while opening the world of true digital data acquisition and software engine analysis. For example, users can add multi-sensor interfaces, and log 5 critical parameters directly into any PC or laptop. Or they can get a PL-1 data logger for hundreds of hours of 32-channel data logging on an SD card. Best of all, the DB gauges include the powerful LogWorks software for synchronous high-speed logging of wideband data, other MTS sensors, and data from a growing list of piggyback fuel controllers and standalone or factory (OBD2) ECUs. This is the same software used by champion engine builders and racers.
Installation Instructions- Comes complete with the patented award-winning LC-2 Wideband Controller, DB Gauge, Bosch 5-wire Wideband 02 Sensor, Bung, Serial Cable, LogWorks Software (Free Download), and instructions
$287.19
The Innovate Motorsports DB gauges are 52mm (2 1/16) air fuel gauges. Each gauge features a bright LED display (available in blue, green, or red). Each Gauge Kit includes the gauge, an LC-2 wideband controller, oxygen sensor, bung, serial cable, and the award-winning LogWorks engine-tuning software. For tuners seeking the most cost-effective way to start monitoring Air/Fuel Ratio, the DB series gauges offer an attractive option, while opening the world of true digital data acquisition and software engine analysis. For example, users can add multi-sensor interfaces, and log 5 critical parameters directly into any PC or laptop. Or they can get a PL-1 data logger for hundreds of hours of 32-channel data logging on an SD card. Best of all, the DB gauges include the powerful LogWorks software for synchronous high-speed logging of wideband data, other MTS sensors, and data from a growing list of piggyback fuel controllers and standalone or factory (OBD2) ECUs. This is the same software used by champion engine builders and racers.
Installation Instructions- Comes complete with the patented award-winning LC-2 Wideband Controller, DB Gauge, Bosch 5-wire Wideband 02 Sensor, Bung, Serial Cable, LogWorks Software (Free Download), and instructions
$121.96
The Innovate Motorsports DB gauges are 52mm (2 1/16) air fuel gauges. Each gauge features a bright LED display (available in blue, green, or red). For tuners seeking the most cost-effective way to start monitoring Air/Fuel Ratio, the DB series gauges offer an attractive display option for the LC-1, LC-2, LM-1, or LM-2 lambda controller kits.
Installation Instructions- These kits includes the DB Gauge, mounting hardware, and quick-start guide.
$28.85
Not all SD cards are compatible with Innovate Motorsports products. This card has been tested and approved for use.
- Not all SD cards are compatible with Innovate Motorsports products. This card has been tested and approved for use.
$19.68
$45.90
This Adapter is recommended for connecting computers without Serial ports to Innovate Motorsports devices using LM Programmer or Logworks softwares. This cable will convert Serial to USB. Hardware drivers included.
- Compatible With Pcs Equipped With Windows 98 Se, Me, 2000, Xp, Vista 32, Vista 64, 7 & 8 (With Latest Driver Download)
$112.77
$22.97
$30.79
$220.00
$160.00
$550.00
Showing 120/465
Explore Related Collections
- Choosing a selection results in a full page refresh.
- Opens in a new window.