The Revel VLS 52mm Digital OLED Oil Temperature Gauge provides precise, real-time monitoring of your vehicle's oil temperature within a 100 to 300 degree Fahrenheit range. Built with a high-contrast organic LED (OLED) display, this gauge offers superior clarity and a wider viewing angle compared to traditional digital displays, ensuring critical data is readable at a glance in any lighting condition.

Designed for seamless integration into standard 52mm (2-1/16 inch) gauge pods, the VLS series combines a clean, modern aesthetic with the accuracy required for high-performance applications. This unit allows drivers to monitor thermal trends and ensure the engine remains within safe operating temperatures during spirited driving or towing.

• Manufacturer Part Number: 1TR1AA003R
• Series: Revel VLS
• Gauge Type: Digital Oil Temperature
• Display: High-Contrast OLED
• Diameter: 52mm
• Temperature Range: 100-300 Degrees Fahrenheit

The Innovate Motorsports DB-Series digital gauge provides a precise, high-brightness interface for monitoring engine air/fuel ratios. Designed for tuners and performance enthusiasts, this 52mm (2 1/16") gauge features a vibrant blue LED display for high-contrast visibility in all lighting conditions.

This DB-Series unit is engineered as a cost-effective display solution for existing wideband setups. It connects directly to the serial or analog outputs of compatible lambda controllers to provide real-time data essential for tuning and engine health diagnostics.

• Manufacturer Part Number: 3793
• Display Type: High-brightness digital blue LED
• Diameter: 52mm (2 1/16")
• Compatibility: Designed for use with Innovate Motorsports LC-1, LC-2, LM-1, or LM-2 lambda controller kits
• Installation: Fits standard 52mm gauge pods and includes basic mounting hardware

Includes: DB-Series blue LED gauge, mounting hardware, and quick-start guide. Note: This is the gauge only and requires a separate wideband controller and sensor for operation.

Fits select 1993-2006 Jeep Cherokee, Grand Cherokee, and Wrangler models with electrically driven speedometers.

Recalibrate your dashboard readings after installing larger tires or changing axle ratios with this Omix replacement speedometer gear. This 39-tooth gear is designed to restore accuracy to your vehicle's speedometer by correctly interfacing with the electronic sensor. It features a short shaft configuration and is color-coded green for easy identification, ensuring a direct-fit installation that meets or exceeds original equipment standards.

• 39-tooth count for specific tire and gear ratio recalibration
• Short shaft design for electrically driven speedometers
• Green color-coded for quick identification
• Replaces factory OE part number 52067639
• Durable construction for long-term gear engagement
• Manufacturer Part Number: 18760.27

The Banks Power 63735 Universal OBD-II Splitter Cable allows for the connection of two devices to a single OBD-II port. This Y-cable is engineered with a low-profile, right-angle male plug to ensure minimal interference with the driver's footwell and surrounding dash panels, maintaining a clean and tucked installation.

This splitter is specifically designed to facilitate the use of Banks electronic devices alongside aftermarket accessories like retractable power steps. Note that because most vehicle ECMs are limited to communicating with one diagnostic device at a time, using two active monitors simultaneously may lead to one device failing to report data correctly.

• Functional Design: Right-angle connector for high-clearance, low-interference fitment.
• Device Support: Ideal for combining Banks tuning/monitoring modules with automatic power steps.
• Universal Application: Compatible with standard OBD-II (J1962) ports found in most modern vehicles.
• MPN: 63735

Fitment Note: Not intended for the simultaneous use of multiple diagnostic monitors or third-party OBD data loggers. Designed primarily for use with Banks devices and retractable steps.

Fits select 2022-2025 Chevrolet Silverado 1500, 2500 HD, 3500 HD, GMC Sierra 1500, and GMC Savana 2500/3500 models.

The Banks Power iDash Stealth Pod (MPN 63369) provides a clean, factory-style mounting solution for your iDash gauge without sacrificing utility. This single-gauge pod is precision-engineered to affix directly to the factory A-pillar grab handle, maintaining full use of the handle while positioning the gauge at an optimized viewing angle for better ergonomics and reduced eye movement.

Constructed from industrial-grade Polyamide-12, these pods are designed to withstand extreme cabin temperatures and UV exposure. The "press-and-go" friction fit allows for a simple installation without the need for screws or tape—simply slide the 52mm iDash in and twist to level. Each pod features a natural black finish that can be painted to match your vehicle's specific interior trim.

• Direct-fit mount for Banks iDash 52mm gauges
• Retains factory A-pillar grab handle functionality
• Optimized viewing angle for enhanced driver visibility
• Durable OE-grade Polyamide-12 construction
• Internal wire routing for a clean, professional appearance
• Easy friction-fit installation requires no hardware
• Natural black finish is paintable for a custom match
• Note: Designed specifically for the low-profile iDash; not compatible with deep-set or mechanical gauges

The Haltech WB2 NTK Wideband Controller Kit (HT-159988) provides precise, dual-channel Air-Fuel Ratio (AFR) monitoring directly to your ECU via the CAN bus. This kit is engineered for high-performance tuning applications where data accuracy is critical, utilizing laboratory-grade NTK sensors to ensure reliable readings across various fuel types and high exhaust temperatures.

By monitoring both banks of an engine simultaneously, the WB2 allows for individual bank trim adjustments and advanced engine protection strategies. The plug-and-play CAN connectivity simplifies wiring and integrates seamlessly with Haltech Elite and Nexus series ECUs, providing a high-speed data link for real-time tuning.

• Dual-channel wideband controller for simultaneous twin-bank monitoring
• Utilizes high-accuracy NTK sensors for superior response and longevity
• Seamless integration via included 1200mm CAN bus cable
• Supports engine protection and closed-loop fuel control strategies
• Manufacturer Part Number: HT-159988

What's Included: WB2 Controller, (2) NTK Sensors, (2) Weld-on Bungs, 1200mm CAN Cable, Power Supply Cable, and Quick Start Guide.

Fits 2002-2006 Acura RSX Base and Type-S.

The AutoMeter 22133 Triple A-Pillar Gauge Pod offers a professional-grade mounting solution designed to integrate seamlessly with your vehicle's interior. This full-length pillar mount provides space for three 2-1/16 inch (52.4mm) gauges, positioning them within the driver's line of sight for quick monitoring of critical engine data without obstructing the forward view.

• Holds three 2-1/16 inch (52.4mm) gauges
• Full-pillar design replaces or overlays factory trim for a clean, integrated look
• Manufactured from high-quality, durable composite materials to resist warping
• Black textured finish can be painted to match your custom interior color
• Includes necessary mounting hardware for a secure installation
• Manufacturer Part Number: 22133

Fits 1994-2004 Ford Mustang models, including Base, GT, Bullitt, GTS, Mach 1, and SVT Cobra.

The AutoMeter 10004 single steering column gauge pod provides a clean, integrated solution for mounting an additional 2-1/16" (52.4mm) gauge directly in the driver's field of vision. This vehicle-specific mount is engineered to install over the top of the factory steering column shroud, maintaining a factory-style appearance while keeping critical engine data easily visible without obstructing the instrument cluster.

Molded from durable ABS composite material, this pod features a black textured finish that complements the original interior trim. For those seeking a custom look, the composite surface can be painted to match your specific interior color. This pod is a precise fit for SN95 and New Edge Mustang interiors, ensuring a secure mount that withstands daily driving.

• Specifically designed for 2-1/16" (52.4mm) gauges
• Single pod configuration for steering column mounting
• Durable ABS composite construction for long-term heat resistance
• Textured black finish is paintable for a custom match
• Direct fit over factory steering column shroud
• Manufacturer Part Number: 10004

Fits select 2018-2022 Chrysler, Dodge, Jeep, and Ram vehicles equipped with a Security Gateway.

The Z Automotive Z_SGW Security Gateway (SGW) Bypass Module is an essential component for owners of late-model Stellantis vehicles who want to unlock full diagnostic and programming capabilities. Starting in 2018, many vehicles were equipped with a Security Gateway module that prevents aftermarket scan tools and programmers from writing data or making changes to the vehicle via the OBDII port.

This bypass module restores full bidirectional communication by plugging directly into the factory SGW harness. This allows aftermarket devices like the Tazer programmer, diagnostic scanners, and flash tuners to function as intended. It is a necessary addition for any DIY maintenance, custom programming, or when using a Tazer to unlock performance features.

• Manufacturer Part Number: Z_SGW
• Enables full write access through the factory OBDII port
• Required for Tazer functionality on 2018-2022 models
• Simple plug-and-play installation into the factory harness
• Compatible with aftermarket scan tools and tuning devices

Fits 1976-1986 Jeep CJ. This Kentrol gauge cover is an essential component for restoration projects or custom builds where the factory radio opening is not required. By eliminating the radio cutout, this cover provides a clean, uninterrupted dashboard appearance that tidies up the interior of your classic CJ.

Built to ensure a precise fit over factory mounting points, this gauge cover features a high-luster polished silver finish. It serves as both a protective layer for your dash and a significant cosmetic upgrade, replacing or covering aged and weathered original trim with hardware designed for long-term durability.

• Direct fit for 1976-1986 Jeep CJ models
• Custom design without radio head unit opening
• High-luster polished finish for a classic look
• Precision-stamped for accurate gauge alignment
• Manufacturer Part Number: 30521

Fits 1977-1986 Jeep CJ.

Refresh your classic Jeep dashboard with the Kentrol Gauge Cover. This precision-fit trim piece is designed to replace or accent the factory gauge surround, offering a significant aesthetic upgrade over weathered or faded original components. The polished silver finish provides a mirror-like luster that stands up to the environmental demands of open-cabin driving while maintaining its brilliance over time.

• Specifically engineered for 1977-1986 Jeep CJ models
• Bright polished silver finish for a premium interior look
• Direct fitment ensures a clean, professional appearance on the dash
• Durable construction designed for long-term reliability
• Manufacturer Part Number: 30412

The Innovate MTX-A Series (MTX Analog) 30 PSI Vacuum/Boost Gauge Kit provides precise, high-speed monitoring for forced induction applications. Built around a microprocessor-driven 270-degree stepper motor, this 2-1/16" (52mm) gauge is engineered to maintain steady needle placement in high-shock and high-vibration environments that often cause lesser mechanical gauges to flutter.

Equipped with the Innovate MTS (Modular Tuning System) serial in/out, this gauge integrates seamlessly with other Innovate devices or third-party MTS-enabled data loggers to expand your vehicle's diagnostic capabilities. The kit features a high-accuracy 4-Bar MAP sensor, ensuring reliable pressure readings even in high-performance builds. While the black faceplate is fixed, the kit includes both black and silver interchangeable bezels to match your interior aesthetic.

• Product Series: MTX-A (Analog)
• Measurement Range: 30 PSI Boost / Vacuum
• Gauge Diameter: 2-1/16" (52mm)
• Movement: High-torque 270-degree stepper motor
• Communication: Innovate MTS Serial In/Out for data logging
• Indicator: Programmable warning light
• MPN: 3908

Kit Includes: Gauge (Black Faceplate), Black Bezel, Silver Bezel, Serial Program Cable, 4-Bar MAP Sensor, MAP Accessory Kit (T-Fitting, Vacuum Hose, Zip Ties), and Quick Start Installation Guide.

The Innovate Motorsports LM-2 Analog Cable (MPN 3811) is an essential accessory designed to expand the data-logging capabilities of your LM-2 Wideband Air/Fuel Ratio meter. This cable interfaces directly with the LM-2 unit to provide four channels of analog input and two channels of analog output, allowing for comprehensive engine monitoring during tuning sessions.

Specifically required for capturing an RPM signal, this cable is vital for tuners who need to correlate AFR data with engine speed. By integrating these additional data points, you can generate more accurate fuel maps and identify specific performance trends across the entire RPM range. The high-quality shielding helps maintain signal integrity for precise logging and output to external devices.

• Provides 4 channels of analog input and 2 channels of analog output
• Essential requirement for RPM input on Innovate LM-2 units
• Direct-fit connection for seamless integration with LM-2 hardware
• Facilitates advanced data logging for precise engine calibration
• Manufacturer Part Number: 3811

Restore the accuracy of your monitoring system with this genuine Innovate Motorsports Replacement Temperature Sensor. Engineered as a direct service component (MPN 15-0049), this sensor provides the precise temperature data required by Innovate digital gauges and data logging hardware. Reliable temperature feedback is critical for monitoring engine health, preventing overheating, and making informed tuning decisions under load.

• Manufacturer Part Number: 15-0049
• Application: Designed for use with Innovate Motorsports gauges and data loggers
• Function: Monitors fluid (oil/coolant) or air temperatures depending on system configuration
• Build: High-sensitivity thermistor housed in a durable threaded body for consistent signal output
• Installation: Bolts into standard threaded ports for a secure, leak-free seal

Upgrade your vehicle's instrumentation with the Haltech iC-7 Display Dash (HT-067010). This 7-inch, full-color digital instrument cluster provides a crisp, high-brightness interface for real-time engine monitoring and data logging. Designed for seamless integration, it connects directly via CAN to supported Haltech ECUs or through the included OBD-II adapter for late-model factory engine management systems.

The iC-7 is built to handle the rigors of performance driving, featuring a transflective screen for excellent visibility even in direct sunlight. The kit includes all necessary cabling and mounting hardware to streamline the installation process into your custom or factory dashboard.

• High-brightness 7-inch color display (800 x 480 resolution)
• Direct CAN connectivity for Haltech Elite and Nexus series ECUs
• OBD-II connectivity for monitoring generic SAE PIDs on late-model vehicles
• Programmable shift light array and customizable screen layouts
• Manufacturer Part Number: HT-067010
• Includes: iC-7 Display, main wiring harness, OBD-II to CAN cable, and mounting hardware

The Grams Performance G2-99-0030 is a professional-grade 0-30 PSI (2.06 bar) fuel pressure gauge designed for high-vibration automotive environments. This gauge is glycerin-filled to effectively dampen needle flutter, ensuring stable and accurate readings at a glance even in high-performance or high-RPM applications where engine harmonics typically make standard gauges difficult to read.

Constructed for longevity and clarity, the G2-99-0030 features a matte black stainless steel case and bezel paired with a shatterproof polycarbonate lens. The internal brass and stainless steel components provide corrosion resistance for reliable service life. With its compact 1.5-inch face and standard 1/8-inch NPT fitting, it easily integrates into fuel rails or aftermarket fuel pressure regulators.

• Part Number: G2-99-0030
• Pressure Range: 0-30 PSI (2.06 bar)
• Face Diameter: 1.5 in. (38.1mm)
• Fitting Size: 1/8 in. (3.175mm) NPT
• Housing Material: Matte Black Stainless Steel
• Internal Construction: Stainless Steel and Brass
• Lens Material: Shatterproof Polycarbonate
• Vibration Control: Glycerin Filled

The Stack Instruments Pedestal Gauge Mount (ST264809) offers a professional solution for mounting auxiliary gauges in a visible, easily accessible location. Designed specifically for 52mm (2-1/16 inch) gauges, this pedestal mount allows for secure installation on dashboards, steering columns, or any flat surface where a clear line of sight to your engine vitals is required.

• Fits standard 52mm (2-1/16") gauge housings
• Includes a finished black mounting cup for a clean, integrated aesthetic
• Pedestal base allows for adjustable positioning to optimize viewing angles
• Engineered to provide a stable, vibration-resistant mount for sensitive instrumentation
• Manufacturer Part Number: ST264809

Fits select 1999-2007 Ford F-250 and F-350 Super Duty trucks (XL, XLT, Lariat, King Ranch, and Harley-Davidson editions).

Protect your engine with the precision of the AutoMeter Factory Match series fuel pressure gauge. Designed specifically to coordinate with factory Ford instrumentation, this 52.4mm (2-1/16") gauge uses a digital stepper motor to provide an accurate 270-degree full sweep for immediate, reliable readings. Whether you are running a high-performance fuel-injected setup or a carbureted build, monitoring pressure is critical for avoiding lean conditions and expensive component failures.

The included solid-state 1/8" NPT pressure transducer is built to withstand high vibration and engine bay heat better than mechanical alternatives. This electronic kit includes a direct plug-in wiring harness to simplify installation and features a 0.5 - 4.5V analog output for seamless integration with data loggers or EFI engine management systems.

• Measurement Range: 0-100 PSI
• Face Diameter: 52.4mm (2-1/16")
• Full sweep digital stepper motor movement
• 0.5 - 4.5V analog output for data logging
• Includes 1/8" NPT solid state pressure transducer
• Compatible with 12V and 16V electrical systems
• Manufacturer Part Number: 8463

Monitor your engine coolant temperatures with precision using the AutoMeter Sport-Comp 52mm Short Sweep Electronic Water Temperature Gauge. This metric-scale instrument utilizes race-proven air-core electric movements to provide quick and accurate readings while keeping hazardous fluids safely outside the vehicle cabin. Designed for versatility, the 3337-M is compatible with both 12-volt and 16-volt electrical systems, making it suitable for nearly any street or race application.

• Gauge Range: 40-120° Celsius
• Size: 52mm (2-1/16 in.)
• Movement: Short Sweep Air-Core Electric
• Electrical Compatibility: 12V and 16V systems
• Included Hardware: 1/8 in. NPT temperature sender, 3/8 in. and 1/2 in. NPT adapters, and mounting hardware
• Lighting: Bulb and socket assembly with red and green covers for customized illumination
• Part Number: 3337-M

Each kit comes complete with a high-accuracy 1/8 in. NPT temperature transducer and necessary adapters for a straightforward installation on a wide variety of engine blocks and coolant crossovers.

Fits 1991-1995 Mazda RX-7 models including Base, Convertible, R1, R2, Touring, and Turbo.

This AutoMeter dual gauge pod is engineered to seamlessly integrate two 2-1/16" (52.4mm) gauges into your Mazda RX-7 interior. By positioning critical performance data within the driver's direct field of vision, it allows you to monitor engine vitals without taking your eyes off the road or track. This right-hand pod is designed for a precision fit, providing a clean, factory-like appearance while maintaining interior ergonomics.

• Fits two 2-1/16" (52.4mm) gauges
• Positions data within the driver's field of vision for safety and convenience
• High-quality construction for seamless interior integration
• Color: Black
• Mounting Location: Right-hand side
• Manufacturer Part Number: 23674

The AutoMeter 2267 adapter fitting provides a reliable solution for installing aftermarket pressure sensors into metric engine ports. This precision-machined brass adapter converts a standard M14x1.5 metric port to a 1/8" NPTF female thread, making it essential for mounting oil pressure or fuel pressure senders in various domestic and import applications.

• Manufacturer Part Number: 2267
• Material: Corrosion-resistant brass for a durable, leak-free seal
• Male Thread: M14x1.5
• Female Thread: 1/8" NPTF
• Application: Adapts 1/8" NPT sensors to metric oil galleries or filter housings

Mount your performance monitors at eye level with the AutoMeter 22132 Dual Pillar Gauge Pod. Designed specifically for the 2002-2006 Acura RSX, this mounting solution attaches to the factory A-pillar using the included hardware to provide a clean, integrated look for two 2-1/16" (52mm) gauges.

Constructed from high-quality, durable composite materials, the pod features a black textured finish that maintains a professional appearance. For those looking for a complete OEM-style integration, the composite surface is paintable to allow for a perfect color match to your vehicle's interior trim.

• Fits 2002-2006 Acura RSX (Base and Type-S)
• Holds two 2-1/16" (52mm) gauges
• Durable composite construction
• Black textured finish (paintable)
• Includes mounting hardware
• Manufacturer Part Number: 22132

Fits 1990-1996 Nissan 300ZX (2+2, Base, and Turbo) models.

This AutoMeter 20801 pillar gauge pod provides a clean, professional mounting solution for a single 2-1/16-inch (52mm) gauge. Engineered to replace or attach to the factory A-pillar, it offers a seamless integration that keeps critical engine data within your direct line of sight without obstructing your view of the road.

Constructed from high-quality, durable composite materials, this pod features a black textured finish designed to withstand the heat and UV exposure typical of dashboard environments. While it looks great as-is, the material is also paintable, allowing you to achieve a perfect color match with your Z32's interior trim.

• Precision-molded for 1990-1996 Nissan 300ZX factory pillars
• Mounts one 2-1/16" (52mm) gauge
• High-quality composite construction prevents warping or cracking
• Black textured finish can be painted to match interior
• Includes all necessary mounting hardware for a secure installation
• Manufacturer Part Number: 20801

Fits select 1992-1997 Ford F-150, F-250, F-250 HD, and F-350 models.

The AutoMeter 17303 triple pillar gauge pod provides a secure, integrated mounting solution for three 2-1/16-inch (52.4mm) gauges. Engineered for a precise fit over the factory A-pillar, this pod maintains a professional appearance while positioning critical engine data directly in the driver's line of sight. The unit is manufactured from a durable composite material with a black textured finish that can be painted to match your vehicle's specific interior color.

• Holds three 2-1/16-inch (52.4mm) gauges
• Molded from high-quality composite to withstand heat and UV exposure
• Black textured finish; paint-to-match compatible
• Mounts over factory A-pillar using included hardware
• Manufacturer Part Number: 17303

The AEM CD-7G Carbon Flush Digital Dash (PN 30-5702F) provides professional-grade data visualization in a sleek, flush-mount package. Featuring a 7-inch full-color screen with 800x480 resolution, this display is housed in a rugged, lightweight flow-molded carbon fiber composite enclosure. Designed for high-performance environments, the screen offers 1000cd/m2 brightness and an anti-glare filter for complete readability in direct sunlight.

This "G" model features an integrated 20Hz GPS receiver and antenna, enabling precise track mapping and lap timing out of the box. For monitoring and alerts, the dash includes seven ultra-bright, programmable LEDs for RPM and shift light indication, plus two additional programmable LEDs for auxiliary signals. The unit is IP66 water-resistant, making it a reliable solution for open-cockpit race cars and marine applications.

• Manufacturer Part Number: 30-5702F
• Display: 7-inch full-color 800x480 resolution screen
• GPS: Onboard 20Hz GPS receiver and external antenna included
• Housing: Flow-molded carbon fiber composite, flush-mount design
• Environmental: IP66 water resistance (open-cockpit safe)
• Visibility: 1000cd/m2 brightness with anti-glare filter
• Connectivity: AEMnet CAN-enabled; compatible with 2008-up OBDII via adapter (sold separately)
• Expandability: Supports up to 7 programmable pages including dedicated alarm and startup pages
• Software: Includes free DashDesign Graphics Editor for custom layout creation

The AEM CD-7 Carbon Flat Panel Display (PN 30-5700F) is engineered for professional-grade in-dash integration. Designed without integrated buttons or a bulky shade hood, this flush-mount version is the ideal solution for clean, recessed installations or custom dash panels with tight tolerances. The unit is housed in a lightweight, flow-molded carbon fiber composite enclosure and carries an IP66 water-resistance rating, making it safe for use in open-cockpit racing environments.

Equipped with a high-contrast 7-inch 800x480 resolution screen, the CD-7 Carbon is daylight readable with 1000cd/m2 brightness and a built-in anti-glare filter. Seven ultra-bright programmable LEDs span the top of the display for RPM and shift light indication, while two additional LEDs are available for user-defined alarms. The display accepts data from AEMnet CAN-enabled devices and third-party CAN bus systems, including 2008-up factory ECUs via an OBDII adapter (sold separately).

• Manufacturer Part Number: 30-5700F
• Display: 7-inch full color (800x480 resolution)
• Brightness: 1000cd/m2 (daylight readable)
• Housing: Flow-molded carbon fiber composite
• Water Resistance: IP66 rated
• LEDs: 7 programmable shift lights, 2 alarm LEDs
• Connectivity: Two-channel CAN bus (AEMnet and non-AEM)
• Features: Odometer function, night-dimming 'headlight-in' connection, and 200MB internal logging

The AEM CD-5G Carbon Flat Panel Digital Display (MPN 30-5602F) is engineered for high-performance vehicles requiring a seamless flush-mount installation. This version of the CD-5 Carbon series features a slim, flow-molded carbon fiber composite housing without integrated buttons or a shade hood, making it the ideal solution for custom dash enclosures or tight-tolerance cockpits. It features a high-speed internal 20Hz GPS receiver and antenna for precise tracking and lap timing.

Equipped with a full-color, 5-inch screen (800x480 resolution), the display is rated at 1000cd/m2 for exceptional readability even in direct sunlight. Seven ultra-bright, programmable LEDs span the top of the housing for RPM and shift light indication, while two additional LEDs are fully user-configurable. The CD-5G integrates with AEMnet CAN-enabled devices and non-AEM CAN bus systems, providing a centralized hub for engine data and vehicle diagnostics.

• Internal 20Hz GPS: Onboard receiver and antenna for accurate position and speed data.
• Display: 5-inch full-color screen with 800x480 resolution and anti-glare filter.
• Durability: IP66 water resistance allows for use in open-cockpit racing environments.
• Construction: Lightweight, rugged flow-molded carbon fiber composite enclosure.
• Connectivity: Supports AEMnet, non-AEM CAN bus, and 2008-up OBDII (with optional adapter).
• Programmable Layouts: Create custom pages or use supplied SAE warning icons with DashDesign software.
• Expansion: Compatible with remote button kits (30-3610) and VDM modules (30-2206) for advanced G-load and track mapping.

The AEM CD-5L Carbon Logging Flush Digital Dash (30-5601F) is engineered for custom dash enclosures and tight-tolerance flush mount installations. This unit provides the robust logging and display capabilities of the CD-5 series in a streamlined, flow-molded carbon fiber composite housing that eliminates the external buttons and integrated sun hood. Its 5-inch full-color screen features a high-speed 800x480 resolution and 1000cd/m2 brightness, ensuring vital engine data remains visible even in direct sunlight.

• Integrated Logging: Includes 200Mb of internal logging memory at rates up to 1,000Hz per channel.
• Visual Alerts: Features seven ultra-bright, programmable RPM/shift light LEDs and two additional programmable warning LEDs.
• Rugged Construction: IP66 water-resistant rating allows for use in open-cockpit or off-road environments.
• Connectivity: Accepts channels from AEMnet CAN-enabled devices, non-AEM CAN bus systems, and 2008+ factory ECUs via optional OBDII adapters.
• Customization: Fully compatible with DashDesign Graphics Editor software; supports over 200 SAE and custom warning icons.
• Flexible Inputs: Includes two extra switch inputs for user-triggered events like blinkers or high beams; odometer function included.

The CD-5L 30-5601F is compatible with carbureted and pre-2008 vehicles when paired with AEM CAN sensor modules. It supports external button kits (PN 30-3610) for page navigation and the AEM Vehicle Dynamics Module (PN 30-2206) for 3-axis G-load and GPS track mapping.

Monitor your turbocharger system performance with precision using the Turbosmart mechanical boost gauge. Designed for reliable, real-time pressure monitoring, this gauge provides accurate readings from 0 to 30 psi without the need for complex electronic sensors or calibration. Its simple mechanical operation makes it a dependable diagnostic tool for identifying boost leaks or ensuring your wastegate is performing as expected.

This 52mm (2-1/16") gauge features a high-contrast black face housed in a classic silver bezel, making it compatible with most standard gauge pods and pillars. Integrated backlighting ensures clear visibility during night driving or in low-light cockpit conditions. Because it utilizes a direct mechanical sweep, you receive an immediate, analog response to changes in manifold pressure.

• Measurement Range: 0-30 psi
• Gauge Diameter: 52mm (2-1/16")
• Operation Type: Mechanical
• Face Color: Black
• Bezel Finish: Silver
• Illumination: Bright backlighting included
• Manufacturer Part Number: TS-0101-2023

The Turbosmart TS-0402-2023 is a precision 0-100 PSI mechanical fuel pressure gauge engineered for high-performance fuel system monitoring. This liquid-filled gauge is specifically designed to dampen the needle against engine vibrations and rapid fuel pressure pulsations, ensuring steady and accurate readings in demanding environments.

• Pressure Range: 0-100 PSI
• Thread Size: 1/8 NPT male fitting
• Vibration Dampening: Liquid-filled housing for needle stability and component longevity
• Compatibility: Direct fit for Turbosmart FPR800, FPR1200, FPR2000, and FPR3000 series regulators
• Manufacturer Part Number: TS-0402-2023

Constructed for durability and precision, this gauge provides the critical data needed to verify fuel system health and dial in regulator settings accurately.