This Part Fits:

This Part Fits:

This Part Fits:

This Part Fits:

This Part Fits:

This Part Fits:

This Part Fits:

This Part Fits:

This Part Fits:

For models with HICAS (High Capacity Actively Controlled Steering), our SPL Parts HICAS Eliminator Kit (HCK) eliminates the rear wheel steering feature. This provides a more linear driver control and feel at the limit, and prevents rear wheel steering from interfering with counter steering and drifting. Our kit consists of our new lightweight billet low profile HICAS conversion brackets, SPL Parts Rear Toe Rods, SPL Parts FKS series Rear Monoball Bushings for the knuckle to replace the stock HICAS balljoints, and fittings to delete the HICAS hydraulic pump loop (for Hydraulic HICAS models).Our Rear Toe Links feature gun drilled 2024 Aluminum center links, clamps, and clevises, along with Blue Anodized Titanium socket head cap screws and our 360 degree rotating clamp system. This combination provides superior strength, performance, durability, and ease of adjustment. Long gone are the days of fumbling with wrenches to tighten jam nuts while trying to trying to keep your bearings oriented correctly. A simple 3/16" allen key is all that is required to lock down your alignment settings!Our FKS series Monoball Bushings feature FK Racing Bearings with a self lubricating Teflon liner, and highly precise (machined to 1/1000th inch) CNC machined 6061-T6 Billet Aluminum bearing shell for an accurate fit. Sold as a complete kit for one car.Made in the USA. Applications: 1989-1994 Nissan 240SX (S13) 1990-1996 Nissan 300ZX (Z32) 1989-1994 Nissan Skyline (R32) 1994-1998 Nissan Skyline (R33) 1999-2002 Nissan Skyline (R34) Need a replacement rod end? SPL Rod Ends

• Proudly made, engineered, and assembled in the USA.

This Part Fits:

The stock eccentric bolts provided by BMW for small toe adjustments tend to slip under high cornering loads, causing changes to the rear alignment. Our SPL Parts Eccentric Lockout Toe Arm (ELT) kit eliminate the stock eccentric bolts to keep your rear alignment where you set it. You must have adjustable control arms in order to adjust toe after eliminating the stock eccentric bolts. Our lockout plates are CNC machined from 6061-T6 Aluminum and supplied with CAD plated grade 10.9 hardware for absolutely zero-slip. One kit includes washers and bolts for both toe arms. Sold as complete kit for one car.Made in the USA. Application List: 2014 - 2021 F80, F82, F83, F87 2022+ G80, G82, G83, G87 2002+ Z4

• Proudly made, engineered, and assembled in the USA.

This Part Fits:

The stock eccentric bolts provided by BMW for small toe adjustments tend to slip under high cornering loads, causing changes to the rear alignment. Our SPL Parts Eccentric Lockout (EL) kit eliminate the stock eccentric bolts to keep your rear alignment where you set it. You must have adjustable control arms in order to adjust toe after eliminating the stock eccentric bolts. Our lockout plates are CNC machined from 6061-T6 Aluminum and supplied with CAD plated grade 10.9 hardware for absolutely zero-slip. One kit includes washers and bolts for both toe arms. Sold as complete kit for one car.Made in the USA. Application List: 2006 - 2011 E81, E82, E82M, E87, E88 2006 &ndash

• Proudly made, engineered, and assembled in the USA.

This Part Fits:

Don’t let slipping eccentrics ruin your track day! The stock eccentric bolts provided by Porsche tend to slip under high cornering loads, causing unwanted changes to the rear alignment. The SPL Toe Eccentric Lockout (ELT) kit utilizes 6061-T6 aluminum lockout plates and class 10.9 metric hardware to eliminate the stock eccentric bolts to lock down the rear alignment.This kit includes lockout plates and hardware to replace the toe arm eccentrics. You will need adjustable toe arms to retain the ability to adjust the rear alignment.Sold as a complete kit for one car.Made in the USA.

• Proudly made, engineered, and assembled in the USA.

This Part Fits:

The stock eccentric bolts provided by BMW and Toyota for small toe adjustments tend to slip under high cornering loads, causing changes to the rear alignment. Our SPL Parts Eccentric Lockout (ELC) kit eliminate the stock eccentric bolts to keep your rear alignment where you set it. You must have adjustable control arms in order to adjust toe after eliminating the stock eccentric bolts. Our lockout plates are CNC machined from 6061-T6 Aluminum and supplied with zinc plated grade 10.9 bolts and lock nuts for absolutely zero-slip. This kit includes washers and bolts for both camber and toe arms. Sold as a complete kit for one car. Camber Arm Only Made in the USA. Only use this kit if you have adjustable camber arms, such as RUA G29 Applications: 2020+ Toyota Supra A90 GR 2019+ BMW Z4 G29 2018+ BMW G20, G21, G22, G23, G24 2021+ G42

• Proudly made, engineered, and assembled in the USA.

This Part Fits:

The stock eccentric bolts provided by BMW for small camber adjustments tend to slip under high cornering loads, causing changes to the rear alignment. Our SPL Parts Eccentric Camber Lockout (ELC) kit eliminate the stock eccentric bolts in the camber arm to keep your rear alignment where you set it. You must have adjustable control arms (RUA F8X) in order to adjust camber after eliminating the stock eccentric bolts. Our lockout plates are CNC machined from 6061-T6 Aluminum and supplied with zinc plated grade 10.9 bolts and lock nuts for absolutely zero-slip. This kit includes washers and bolts for both camber arms. Sold as a kit for the camber arms for one car.Made in the USA. Applications: 2014 - 2021 F80, F82, F83, F87 2022+ G80, G82, G83, G87

• Proudly made, engineered, and assembled in the USA.

This Part Fits:

The stock eccentric bolts provided by BMW for small camber adjustments tend to slip under high cornering loads, causing changes to the rear alignment. Our SPL Parts Eccentric Lockout Camber Arm (ELC) kit eliminate the stock eccentric bolts to keep your rear alignment where you set it. You must have adjustable control arms in order to adjust camber after eliminating the stock eccentric bolts. Our lockout plates are CNC machined from 6061-T6 Aluminum and supplied with CAD plated grade 10.9 hardware for absolutely zero-slip. One kit includes washers and bolts for both camber arms. Sold as complete kit for one car.Made in the USA. Application List: 2006 - 2011 E81, E82, E82M, E87, E88 2006 &ndash

• Proudly made, engineered, and assembled in the USA.

This Part Fits:

The stock eccentric bolts provided by Nissan for small camber/toe adjustments tend to slip under high cornering loads, causing changes to the rear alignment. Our SPL Parts 370Z Eccentric Lockout (EL) kit eliminate the stock eccentric bolts to keep your rear alignment where you set it. You must have adjustable control arms in order to adjust camber and toe after eliminating the stock eccentric bolts. Our lockout plates are CNC machined from 6061-T6 Billet Aluminum and supplied with CAD plated grade 10.9 hardware for absolutely zero-slip. Sold as complete kit for one car.Made in the USA. Applications: 2009+ Nissan 370Z (Z34) 2007-2008 Infiniti G35 Sedan (V35) 2008+ Infiniti G37 (V36)

• Proudly made, engineered, and assembled in the USA.

This Part Fits:

The stock eccentric bolts provided by Nissan and Infiniti for small camber/toe adjustments tend to slip under high cornering loads, causing changes to the rear alignment. Our SPL Parts 350Z/G35 Eccentric Lockout (EL) kit eliminate the stock eccentric bolts to keep your rear alignment where you set it. You must have adjustable control arms in order to adjust camber and toe after eliminating the stock eccentric bolts. Our lockout plates are CNC machined from T6061 aluminum and supplied with CAD plated grade 10.9 hardware for absolutely zero-slip. Kit includes washers and bolts for both camber and toe arms. Sold as complete kit for one car.Made in the USA. Applications: 2003-2008 Nissan 350Z (Z33) 2003-2006 Infiniti G35 Sedan (V35) 2003-2007 Infiniti G35 Coupe (V35)

• Proudly made, engineered, and assembled in the USA.

This Part Fits:

The stock eccentric bolts provided by Nissan for small camber/toe adjustments tend to slip under high cornering loads, causing changes to the rear alignment. Our SPL Parts Eccentric Lockout (EL) kit eliminate the stock eccentric bolts to keep your rear alignment where you set it. You must have adjustable control arms in order to adjust camber and toe after eliminating the stock eccentric bolts. Our concentric lockout plates are CNC machined from stainless steel and supplied with CAD plated grade 10.9 hardware for absolutely zero-slip. Kit includes washers and bolts for both camber and toe arms when selecting Non-HICAS. For HICAS equipped cars, the kit includes washers and bolts for the camber arms only. Sold as a complete kit for one car.Made in the USA. Applications: 1989-1994 Nissan 240SX (S13) 1990-1996 Nissan 300ZX (Z32) 1989-1994 Nissan Skyline (R32) 1994-1998 Nissan Skyline (R33) 1999-2002 Nissan Skyline (R34)

• Proudly made, engineered, and assembled in the USA.

This Part Fits:

The stock eccentric bolts provided by Nissan for small camber/toe adjustments tend to slip under high cornering loads, causing changes to the rear alignment. Our SPL Parts GTR R35 Eccentric Lockout (EL) kit eliminate the stock eccentric bolts to keep your rear alignment where you set it. You must have adjustable control arms in order to adjust camber and toe after eliminating the stock eccentric bolts. Our lockout plates are CNC machined from 6061-T6 Billet Aluminum and supplied with CAD plated grade 10.9 hardware for absolutely zero-slip. Kit includes washers and bolts for both camber and toe arms. Sold as complete kit for one car.Made in the USA. Application: 2008+ Nissan R35 GT-R

• Proudly made, engineered, and assembled in the USA.

This Part Fits:

The stock eccentric bolts provided by Mazda for small camber and toe adjustments tend to slip under high cornering loads, causing changes to the rear alignment. Our SPL Parts NC Miata Eccentric Lockout (EL) kit eliminate the stock eccentric bolts to keep your rear alignment where you set it. You must have adjustable control arms in order to adjust camber and toe after eliminating the stock eccentric bolts. Our lockout plates are CNC machined from 6061-T6 Aluminum and supplied with zinc plated grade 10.9 bolts and lock nuts for absolutely zero-slip. One kit includes washers and bolts for both camber and toe arms. Sold as a complete kit for one car.Made in the USA. Applications: 2006 - 2015 Mazda Miata MX-5 2003 - 2012 Mazda RX-8

• Proudly made, engineered, and assembled in the USA.

This Part Fits:

The stock eccentric bolts provided by BMW and Toyota for small toe and camber adjustments tend to slip under high cornering loads, causing changes to the rear alignment. Our SPL Parts Eccentric Lockout (EL) kit eliminate the stock eccentric bolts to keep your rear alignment where you set it. You must have adjustable control arms in order to adjust toe after eliminating the stock eccentric bolts. Our lockout plates are CNC machined from 6061-T6 Aluminum and supplied with zinc plated grade 10.9 bolts and lock nuts for absolutely zero-slip. This kit includes washers and bolts for both camber and toe arms. Sold as a complete kit for one car.Made in the USA. Applications: 2020+ Toyota Supra A90 GR 2019+ BMW Z4 G29 2018+ G20, G21, G22, G23, G24 2021+ G42

• Proudly made, engineered, and assembled in the USA.

This Part Fits:

The stock eccentric bolts provided for small toe adjustments tend to slip under high cornering loads, causing changes to the rear alignment. Our SPL eccentric lockout kit eliminate the stock eccentric bolts to keep your rear alignment where you set it. You must have adjustable toe arms in order to adjust toe after eliminating the stock eccentric bolts. Our lockout plates are CNC machined from stainless steel and supplied with CAD plated grade 10.9 hardware for absolutely zero-slip. Kit comes comes complete for one car.Made in the USA. Application: 2013+ Scion FR-S/Subaru BRZ/Toyota GT86 2008+ Subaru WRX

• Proudly made, engineered, and assembled in the USA.

This Part Fits:

Spectre's Intake Bolt and Washer Set is engineered to provide premium quality hardware for Chevrolet 265-400 and Chrysler 273-440 small block engines. Measuring 3/8 inch-16 by 1 inch, these grade 5 bolts feature a corrosion resistant zinc-plated finish and hex heads to ensure easy installation. This kit includes 12 bolts and washers.

• Bolts Feature Hex Heads

This Part Fits:

Whether you took your manifold apart, stripped out a bolt, ripped a gasket or simply lost a fitting, this complete hardware kit includes everything that came with your Skunk2 Racing B Ultra Street Manifold when new.

• Incl. All Hardware For Your Racing B Ultra Street Manifold

This Part Fits: