Fits 1976-1986 Jeep CJ5, CJ7, and Scrambler CJ8 models.

Restore the functionality of your windshield wiper system with this direct-fit wiper pivot and short arm from Omix. Specifically designed for the driver side, this component provides a reliable connection between the wiper motor linkage and the wiper arm, ensuring consistent visibility during adverse weather. Built to meet or exceed original equipment standards, this OE-style replacement addresses common issues with stripped or seized pivots on classic CJ models.

• Position: Driver Side (Left)
• Design: Wiper Pivot with Short Arm
• Fitment Type: Direct Replacement
• Replaces OE Number: 5453957
• Manufacturer Part Number: 19105.06
• Limited 5-Year Warranty

Note: For the long passenger side wiper pivot, use Omix part number 19105.04.

Fits 1968-1986 Jeep CJ5, CJ6, CJ7, and Scrambler models. This Omix windshield wiper pivot nut is a direct-fit replacement designed to secure the wiper arm linkage at the cowl. Over time, original hardware can become corroded or stripped, leading to sloppy wiper movement or failure during use. This replacement ensures a tight, factory-style fit to restore proper wiper system operation.

• Direct OE-style replacement for a precise fit and easy installation
• Constructed to original dimensions for reliable clamping force
• Thread Size: 5/8-18
• Head Style: 3/4-inch hex
• Replaces original equipment part number: 4005372
• Manufacturer Part Number: 19105.01
• Backed by a Limited 5-Year Warranty

Sold individually. This nut installs at the pivot point where the wiper shaft protrudes from the body, ensuring the linkage remains properly aligned and anchored.

Fits 1976-1986 Jeep CJ5, CJ7, and Scrambler models.

Maintain the structural integrity of your Jeep's front suspension with this Omix OE-style replacement front leaf spring plate. Specifically engineered for the driver (left) side, this plate serves as a heavy-duty mounting point for your leaf springs and U-bolts. It replaces worn, corroded, or bent factory plates to ensure proper axle alignment and suspension stability on and off the trail.

Constructed from high-strength steel, this component is designed to meet or exceed original equipment specifications for durability and fitment. It offers a direct-bolt-on solution that restores factory-level performance to your classic Jeep's front end.

• Position: Front Left (Driver Side)
• Material: High-strength steel
• Dimensions: 4 inches x 7 inches
• Replaces OE: 5359011
• Fitment: 1976-1986 Jeep CJ models
• Manufacturer Part Number: 18271.15
• Warranty: Limited 5-year warranty

Note: For the corresponding right rear spring plate, use Omix part 18271.16.

Fits select 1976-1986 Jeep CJ5, CJ7, CJ8 Scrambler, and 1987-1995 Wrangler YJ models.

This Omix leaf spring main eye bolt and nut is a direct-fit replacement for worn, corroded, or seized factory hardware. As a critical suspension component, the main eye bolt secures the leaf spring to the chassis or shackle mount, ensuring proper axle alignment and handling. This Grade 8-style hardware is designed to meet or exceed OE specifications for a reliable repair on classic Jeep suspension systems.

This assembly is universal for front or rear and left or right positions. While sold individually, four units are typically required to replace all main eye hardware on a single vehicle.

• Direct OE-style replacement for factory part G9419209K
• 9/16-inch diameter bolt with 3/4-inch hex head
• 4.75-inch shaft length
• Includes matching hex nut
• Manufacturer Part Number: 18271.06
• Limited 5-year warranty

Fits 1976-1986 Jeep CJ and 1987-1995 Wrangler YJ models.

Omix 8-degree rear leaf spring shims are engineered to correct drivetrain pinion angle misalignment, a common issue following the installation of a suspension lift. These shims rotate the rear axle housing to restore proper driveline geometry, helping to eliminate unwanted vibrations and prevent premature U-joint failure. Each shim is precision-machined from aluminum to withstand the stresses of off-road use while maintaining a secure seat within the leaf spring pack.

• Function: Corrects rear pinion angle on lifted suspensions
• Material: Aluminum construction
• Width: 2.5 inches
• Length: 4.75 inches
• Height: 0.93 inches
• Quantity: Pair (Includes two shims)
• Manufacturer Part Number: 18206.02
• Warranty: Limited 5-year manufacturer warranty

Fits 1976-1986 Jeep CJ and 1987-1995 Jeep Wrangler YJ models.

Omix leaf spring shims are engineered to correct pinion angle issues often encountered after installing a suspension lift. By rotating the axle housing, these shims help align the differential yoke with the driveshaft, reducing driveline vibration and preventing premature U-joint wear. Constructed from durable aluminum, these shims are designed for rear leaf spring applications with a 2.5-inch width.

• Angle: 6 Degrees
• Material: Aluminum construction
• Width: 2.5 inches
• Length: 4.75 inches
• Height: 0.75 inches
• Quantity: Includes one pair (2 shims)
• Manufacturer Part Number: 18206.01
• Warranty: Limited 5-Year Warranty

Fits select 1984-1994 Jeep Cherokee (XJ), CJ7, Scrambler (CJ8), and Wrangler (YJ). This Omix steering column to firewall seal is a direct-fit replacement designed to restore the cabin's environmental seal. Over time, factory rubber seals degrade and crack, allowing engine heat, road noise, and fumes to leak into the passenger compartment. This OE-style seal installs at the firewall to ensure a tight, weather-resistant barrier around the steering column shaft.

• Direct replacement for models without a tilt steering column
• OE-style rubber construction for proper fitment and durability
• Prevents environmental contaminants from entering the cabin
• Replaces OE part number: 8120097
• Manufacturer Part Number: 18020.02
• Includes limited 5-year manufacturer warranty

Fits 1987-2001 Jeep Cherokee (XJ) and 1987-1992 Jeep Comanche (MJ).

This Omix radiator isolator pad is designed to restore the factory mounting security of your cooling system. Over time, original isolators dry rot and compress, leading to radiator vibration and potential core damage. This direct-fit, OE-style replacement pad provides the necessary cushioning to keep your radiator properly seated and insulated from chassis vibration.

• Direct-fit replacement for original mounting hardware
• Engineered to hold grease for quiet, long-term operation
• Durable rubber-style construction resists heat and environmental degradation
• Replaces OE Part Number: 52002585
• Manufacturer Part Number: 17470.17
• Note: Sold individually; 2 required per vehicle

Fits select 1971-1990 Jeep CJ5, CJ6, CJ7, Cherokee, Scrambler, Wrangler, Wagoneer, and J-Series trucks equipped with the 258 cubic inch 6-cylinder engine.

This Omix replacement oil fill plug is a direct-fit solution designed to restore the seal on your engine's valve cover. Over decades of heat cycles, original rubber plugs often become brittle, crack, or lose their tension, which can lead to oil seepage and allow contaminants into the lubrication system. This OE-style replacement ensures a tight fit to keep your engine bay clean and your oil where it belongs.

• Engine Compatibility: 258 Cubic Inch (4.2L) 6-Cylinder
• Construction: High-quality rubber for heat resistance and seal integrity
• Fitment Type: Direct Fit / OE Style
• Replaces Original Equipment Number: 33001284
• Manufacturer Part Number: 17402.09
• Warranty: Limited 5-Year Warranty

Fits select 1981-1986 Jeep CJ5, CJ7, Scrambler (CJ8), Cherokee, Wagoneer, Grand Wagoneer, and J10 models equipped with the 4.2L engine.

Keep your vintage Jeep engine sealed and secure with the Omix OE Style valve cover hardware kit. Specifically engineered for use with aftermarket aluminum valve covers, this kit provides a complete solution for replacing worn, leaking, or missing components during a top-end refresh. Every component is designed to meet or exceed factory standards for a precise fit and reliable service life.

• Fitment Application: Designed for use with aluminum aftermarket valve covers.
• Complete Solution: Includes all necessary components for a standard valve cover installation.
• Gasket Material: High-quality cork valve cover gasket for a reliable seal.
• Hardware Included: Includes oil fill cap, two rubber grommets, and all required nuts and bolts.
• Manufacturer Part Number: 17402.01
• Warranty: Limited 5-year manufacturer warranty.

Fits select 1946-1971 Jeep and Willys models equipped with 134-cid engines.

This Omix water pump bearing is an OE-style replacement designed to restore the integrity and performance of your cooling system. A worn or seized bearing can lead to shaft play, cooling fan wobble, and eventual pump failure. This direct-fit component ensures your vintage Jeep engine maintains proper cooling and shaft alignment, meeting or exceeding original factory standards.

• Direct replacement for worn or noisy water pump bearings
• Specifically designed for 134-cid engine applications
• Restores smooth shaft rotation and pulley alignment
• Replaces OE Part Number: 808129
• Manufacturer Part Number: 17104.83
• Compatible with Omix 17104.80 pump service kit
• Limited 5-year warranty

Fitment Table:

Fits select 1977-1999 Jeep Cherokee, CJ5, CJ7, Comanche, Grand Cherokee, Scrambler, and Wrangler (2.5L / 4.0L / 4.2L).

This Omix tapered washer is engineered to provide the correct clamping force and load distribution for retaining intake and exhaust manifolds. Designed as an OE-style replacement, these factory surplus parts ensure a precise fit to prevent manifold leaks and maintain engine performance. The specialized tapered profile is essential for securing the manifold against the cylinder head on Jeep 4-cylinder and 6-cylinder engines.

• Direct-fit replacement for easy installation during manifold service
• Tapered design ensures proper torque application and sealing
• High-quality construction for thermal stability and corrosion resistance
• Replaces OE part number 33004255
• Manufacturer Part Number: 16919.32
• Warranty: Limited 5-Year Warranty

Fits select 1976-1986 Jeep CJ5, CJ7, and Scrambler (CJ8) models equipped with manual transmissions.

Restore smooth clutch engagement and pedal feel with this Omix OE-style replacement clutch bellcrank. Manufactured from durable steel to original factory dimensions, this component replaces a worn, bent, or binding factory bellcrank that can cause difficult shifting or inconsistent clutch take-up. This direct-fit unit is designed to bolt into the factory mounting points without modification, ensuring your Jeep's drivetrain remains reliable on and off the trail.

• Direct replacement for OE part number 5360104
• Heavy-duty steel construction with an OE-style finish
• Overall Length: 9.0 inches
• Arm-to-Arm Distance: 8.25 inches
• Requires two (2) bushings (Part Number 16919.20, sold separately)
• Limited 5-Year Warranty
• Manufacturer Part Number: 16919.07

Fits 1999-2003 Jeep Cherokee and Grand Cherokee models equipped with the Dana 35 rear differential.

This Omix OE-style replacement differential cover fill plug is designed to restore a proper seal to your rear axle. Over time, rubber plugs can become brittle, crack, or fall out, leading to gear oil loss and potential drivetrain damage. This direct-fit component ensures a secure, press-in installation to keep contaminants out and lubricant in.

• Direct replacement for OE part number 05252504AB
• Engineered specifically for Dana 35 rear differentials
• Durable rubber press-in construction for a reliable seal
• Precision molded to OE specifications for a leak-free fit
• Manufacturer Part Number: 16595.97
• Limited 5-year manufacturer warranty

Fits 1976-1986 Jeep CJ5, CJ7, and Scrambler models equipped with AMC 20 rear differentials and 1-piece conversion axles.

This Omix 1-piece rear axle shaft bearing kit is designed specifically for Jeep vehicles that have been upgraded from the factory two-piece axle design to a more reliable one-piece conversion. This kit provides all the essential components to service a single side of your rear differential, ensuring proper axle retention and leak prevention. As a direct-fit solution, it replaces worn components to maintain the integrity of your drivetrain during off-road or daily driving use.

• Engineered for AMC 20 rear differentials with 1-piece axle shafts
• Direct-fit replacement for OE 1-PIECE-K/2
• One kit services one side; two kits required per vehicle
• Complete kit includes: Bearing, inner seal, outer seal, bearing retainer, spacer, (5) wheel studs, and RTV sealant
• Manufacturer Part Number: 16536.07
• Limited 5-Year Warranty

Fits select 1993-2006 Jeep Wrangler, Cherokee, Grand Cherokee, and Liberty models equipped with a Dana 35 rear differential.

Restore the smooth operation of your Jeep’s drivetrain with this OE-style replacement spider gear set from Omix. Designed specifically for the Dana 35 rear axle, this kit replaces worn or chipped internal gears that can lead to excessive driveline play or differential failure. Each component is engineered to meet original equipment standards for fit and durability, providing a direct-fit solution for differential maintenance and repair.

• Fits Dana 35 rear differentials
• Complete kit includes 4 gears, thrust washers, cross shaft, and side washers
• Replaces OE part number: 4740670
• Manufacturer Part Number: 16507.31
• Backed by a limited 5-year manufacturer warranty

Fits 1987-1995 Jeep Wrangler YJ models equipped with factory half doors.

Restore the integrity of your Jeep's soft top assembly with these Omix Window Retaining Channels. Designed as a direct-fit replacement for aged, bent, or corroded factory hardware, these channels ensure your soft top windows remain securely fastened to the lower door. This kit provides a reliable seal and OE-style fitment to keep the elements out of your cabin.

• Direct replacement for a precise fit on factory half doors
• Durable steel construction with a black powder-coated finish for corrosion resistance
• Sold as a complete pair (includes driver and passenger side channels)
• Includes necessary retaining screws for a straightforward installation
• Replaces OE part numbers 55017744 and 55017745
• Manufacturer Part Number: 13701.81

Fits select 2007-2018 Jeep Wrangler JKU 4-Door models including Rubicon, Sahara, Sport, and X trims.

This Omix soft top bow knuckle kit is engineered to restore the structural integrity and smooth operation of your Jeep's soft top frame. Over time, original plastic knuckles can become brittle, crack, or fail due to UV exposure and the mechanical stress of folding the top. This direct-fit replacement kit includes four knuckles, providing all the components needed to service both the 3rd and 4th soft top bows.

• Direct OE-style replacement for a precise fit and factory-like function
• Comprehensive 4-piece kit covers both the 3rd and 4th soft top bows
• Replaces original equipment part number: 68003651AA
• Manufacturer Part Number: 13510.46
• Limited 5-Year Warranty included

Fits 2011-2017 Jeep Wrangler JKU 4-Door models including Rubicon, Sahara, and Sport. This front-to-rear bow strap pair is a direct OE-style replacement designed to restore proper tension and alignment to your Jeep's soft top frame.

Over time, factory straps can stretch, fray, or snap, leading to sagging fabric and poor bow operation. These Omix replacement straps are engineered to match the original factory specifications for fit and durability, ensuring your soft top functions as intended. The kit includes both straps required to service one vehicle.

• Direct fit for 4-door Jeep Wrangler (JKU) models
• Restores soft top bow tension and positioning
• High-quality OE-style construction
• Replaces OE part number: 68068511AA
• Manufacturer Part Number: 13510.45
• Includes: Pair of front-to-rear straps
• Warranty: Limited 5-year manufacturer warranty

Fits 1997-2006 Jeep Wrangler TJ models including SE, Sport, Sahara, Rubicon, X, and 65th Anniversary Edition equipped with a soft top.

The Omix Soft Top Tailgate Bar is a direct OE-style replacement engineered to restore the proper seal and security of your Jeep's rear window. This bar slides onto the bottom of the rear glass and locks into the tailgate brackets, providing the necessary tension to keep the soft top assembly weather-tight and secure during highway speeds or off-road use.

Manufactured to meet or exceed original equipment specifications, this tailgate bar replaces worn, bent, or missing factory hardware without modification. It is finished in a durable coating to resist corrosion and UV exposure, maintaining the clean appearance of your TJ's rear cargo area.

• Direct fit for 1997-2006 Wrangler soft top applications
• Replaces OE part number 55176736AB
• Note: Requires tailgate bar brackets 13510.30 (Right) and 13510.31 (Left) for installation
• Manufacturer Part Number: 13510.32
• Limited 5-year warranty

Fits 1997-2006 Jeep Wrangler models equipped with a soft top.

This Omix replacement tailgate bar bracket is engineered to restore the proper seal and fitment for your Jeep's rear soft top window. Over years of use, factory brackets often crack or fatigue, making it difficult to secure the tailgate bar. This driver-side (left) bracket provides a direct-fit solution, manufactured to match OE dimensions and tolerances for a reliable repair that keeps the elements out of your cargo area.

• Position: Driver Side (Left)
• Direct OE replacement for factory part 55176739AB
• Designed specifically for soft top equipped Jeep TJ models
• Installation: Bolts to factory mounting points
• Manufacturer Part Number: 13510.31
• Warranty: Limited 5-Year Manufacturer Warranty

For a complete service, pair with the passenger-side bracket (Omix 13510.30) and the tailgate bar (Omix 13510.32).

Fits select 1997-2006 Jeep Wrangler TJ models including Sahara, Sport, SE, X, Rubicon, and 65th Anniversary Edition.

Restore the functionality of your soft top with the Omix 13510.30 Tailgate Bar Bracket. This passenger-side (right) bracket is engineered to be a direct-fit replacement for worn or damaged factory hardware, ensuring your rear window tailgate bar remains securely anchored for a proper weather seal. Designed to meet OE specifications, this bracket provides a reliable solution for maintaining the structural integrity of your Jeep's soft top assembly.

• Position: Passenger Side (Right)
• Direct replacement for a factory-correct fit
• Replaces OE Part Number: 55176738AA
• Compatible with factory and OE-style soft top tailgate bars
• Related Parts: Use 13510.31 for Left Side; use 13510.32 for Tailgate Bar
• Manufacturer Part Number: 13510.30
• Includes a 5-year limited warranty

Fits select 1997-2006 Jeep Wrangler TJ models equipped with a factory soft top.

Restore the proper tension and alignment of your Jeep's soft top assembly with this pair of front-to-rear bow retaining straps from Omix. These straps are critical for maintaining the structural integrity of the soft top frame, ensuring it folds and unfolds correctly while staying secured during transit. Designed as a direct OE-style replacement, they install into factory mounting points without modification.

• Direct fit replacement for worn or snapped soft top straps
• Connects the front bow assembly to the rear bow
• Manufactured to meet or exceed original equipment specifications
• OE Cross-Reference: 55176444
• Manufacturer Part Number: 13510.29
• Limited 5-year warranty included

Fits 1987-2006 Jeep Wrangler YJ and TJ models including Base, Sport, Sahara, SE, and Rubicon.

Maintain factory-correct hood alignment and eliminate vibrations with this Omix hood rubber bumper. Designed to sit between the hood and the grille, this bumper prevents metal-on-metal contact and ensures your hood rests at the intended height. This is a factory surplus part, providing an original-equipment fit and finish that meets or exceeds manufacturer specifications.

Installation is straightforward, utilizing factory mounting points. For 1987-1995 Wrangler YJ models, four bumpers are typically required; for 1997-2006 Wrangler TJ models, two are used. This part is sold individually.

• Direct OE-style replacement for a perfect fit
• Restores proper spacing between the hood and grille
• Replaces OE Part Number: 55176291
• Manufacturer Part Number (MPN): 12302.30
• Backed by a Limited 5-Year Warranty

Fits 1976-1986 Jeep CJ5, CJ7, and Scrambler.

Maintain proper hood alignment and prevent metal-on-metal vibration with this Omix hood to grille bumper. Designed as a direct OE-style replacement, this round rubber bumper cushions the contact point between the hood and grille shell to protect your finish and reduce front-end noise. It is built to original dimensions for a precise fit on classic CJ platforms.

• Direct replacement for OE part number 5455348
• Constructed from high-density rubber for durability and weather resistance
• Round profile with an outside diameter (OD) of 0.88 inches
• Sold individually; replaces worn or missing factory isolators
• Manufacturer Part Number: 12029.01
• Limited 5-year warranty

Fits 1997-2018 Jeep Wrangler TJ, JK, and JKU models, including Sport, Sahara, Rubicon, SE, and Unlimited trims.

This Omix OE-style replacement liftgate glass ball stud is designed specifically for the driver (left) side. It mounts directly through the liftgate glass to provide a secure anchor point for the liftgate strut. Over time, original ball studs can corrode or strip, leading to poor strut alignment or glass damage; this direct-fit component restores the structural integrity of your liftgate's support system using factory-spec dimensions and materials.

• Direct OE replacement for a precise fit
• Engineered for durability and long service life
• Mounting position: Left (Driver Side)
• Replaces OE Part Number: 4883497AA
• Manufacturer Part Number: 12012.31
• Limited 5-year manufacturer warranty

Note: For the corresponding right-side ball stud, use Omix part number 12012.30.

Fits 1981-1995 Jeep CJ5, CJ7, Scrambler, and Wrangler YJ.

Restore the reliable operation of your Jeep's doors with this Omix right-side door latch pin and bracket. Over years of use, factory striker pins can wear down or become misaligned, leading to difficulty closing, improper latching, or metal-on-metal rattles while driving. This component is a direct-fit, OE-style replacement designed to restore factory-level security and alignment to your passenger-side door.

• Replaces OE part number: 55029454K
• Direct-fit for the right-hand (passenger) side
• Constructed to original equipment specifications for long-term durability
• Helps maintain secure door closure and proper weatherstrip compression
• For the left-side (driver) assembly, use Omix part number 11810.01
• Manufacturer Part Number: 11810.02
• Includes a limited 5-year warranty

Fits 1981-1995 Jeep CJ5, CJ7, Scrambler, and Wrangler YJ.

This Omix door latch pin and bracket is designed to replace worn or damaged door hardware, ensuring the driver-side door on your vintage Jeep closes securely and aligns correctly with the body. Built to OE specifications, this direct-fit component restores the smooth operation and safety of your vehicle's latching mechanism. It is an essential part for restoration projects or routine maintenance for 1981-1986 CJ models and 1987-1995 Wrangler YJ models.

• Location: Left Side (Driver Side)
• OE Style: Matches factory fit and function for a seamless restoration
• Direct Fit: Bolts to factory mounting points without modification
• Replaces OE Part Number: 55029455K
• Manufacturer Part Number: 11810.01
• Warranty: Limited 5-Year Warranty

Note: For the right-side (passenger) latch pin and bracket, see Omix part number 11810.02.

Fits 2007-2018 Jeep Wrangler JK and JK Unlimited models including Rubicon, Sahara, Sport, and X trims.

Restore the secure fit of your factory body panels with the Omix Fender Flare Hardware Kit. Over time, plastic retainers become brittle from heat and trail vibration, often breaking during maintenance or fender removal. This kit provides a complete set of OE-style fasteners designed specifically for use with factory fender flares, ensuring a flush fit against the body without the gaps associated with worn hardware.

Constructed from UV-treated thermoplastic, these components are engineered to resist fading and cracking under direct sunlight. As a direct-fit replacement, this kit uses the factory mounting locations for a straightforward installation that maintains the original equipment look of your Wrangler.

• Direct OE-style replacement for factory fender flare hardware
• Manufactured from durable UV-treated thermoplastic to prevent sun damage
• Restores proper fitment to sagging or loose flares
• Manufacturer Part Number: 11609.25
• Limited 5-year manufacturer warranty

Fits 1987-1995 Jeep Wrangler YJ submodels including Base, Islander, Laredo, Renegade, Rio Grande, S, Sahara, SE, and Sport.

Restore the secure mounting of your factory or OE-style replacement fender flares with the Omix Fender Flare Hardware Kit. Over time, factory fasteners often become corroded, brittle, or lost. This kit provides a comprehensive set of screws, plastic nuts, and rivets engineered to meet or exceed original equipment standards for a precise fit on the YJ platform.

• Direct OE-style replacement for a factory-correct installation
• Includes necessary screws and plastic nuts for flare mounting
• Replaces original equipment part number 7109K
• Compatible with 1987-1995 Wrangler YJ models
• Note: Extension retainer is not included
• Backed by a limited 5-year manufacturer warranty
• Manufacturer Part Number: 11601.06