Vibrant Performance PTFE hose assemblies are engineered for reliable fluid transfer in demanding environments. This 12-inch pre-assembled line (MPN 29060) features a PTFE inner liner, providing excellent chemical resistance and compatibility with fuel, oil, nitrous, and coolant systems.

• Professionally assembled using hydraulic crimping tools for a secure, leak-free connection.
• Each assembly is pressure tested to its rated working pressure to ensure integrity.
• Equipped with -6AN female fittings: one straight end and one 90-degree end.
• Manufactured with black anodized aluminum hose ends for superior corrosion resistance and a clean look.
• Not for use in high-pressure hydraulic applications.

Vibrant Performance pre-assembled hose assemblies provide a reliable, leak-free solution for plumbing high-performance vehicle systems. This 36-inch hose features a PTFE inner liner, making it compatible with a wide range of fluids including fuel, oil, nitrous, and coolant. Each assembly is professionally finished using a hydraulic crimping tool and is pressure tested to its rated working capacity to ensure long-term durability under demanding conditions.

Equipped with black anodized aluminum -10AN female fittings in a straight and 45-degree configuration, these lines offer a clean finish and a secure seal. Note that these hose assemblies are designed for fluid transfer systems and are not to be used in high-pressure hydraulic or power steering applications.

• Manufacturer Part Number: 29053
• Hose Length: 36 inches
• Hose Inner Liner: PTFE
• Fitting Size: -10AN Female
• Fitting Orientations: Straight to 45-Degree
• Fitting Material: Black Anodized Aluminum
• Assembly Process: Hydraulically crimped and pressure tested

The Vibrant Performance 29052 is a 24-inch pre-assembled PTFE hose designed for professional-grade plumbing in fuel, oil, nitrous, and coolant systems. This assembly features -10AN female fittings in a versatile straight and 45-degree configuration, providing a leak-free solution for critical fluid transfer without the variability of manual assembly.

Each hose is professionally crimped using hydraulic tools to ensure a permanent, high-integrity connection between the chemical-resistant PTFE liner and the black anodized aluminum hose ends. To ensure reliability under operating conditions, every assembly is factory pressure tested to its rated working pressure.

• Part Number: 29052
• Length: 24 inches
• Size: -10AN Female Fittings
• Configuration: 1x Straight, 1x 45 Degree
• Material: PTFE lined hose with Black Anodized Aluminum fittings
• Application: Suitable for fuel, oil, nitrous, and coolant
• Note: Not for use in high-pressure hydraulic applications

Vibrant Performance pre-assembled hose assemblies provide a professional plumbing solution for critical fluid delivery. This 12-inch PTFE-lined hose features -10 AN female fittings—one straight and one 45-degree—making it an ideal choice for tight routing in fuel, oil, nitrous, or coolant systems.

Unlike standard screw-together hose ends, these assemblies feature professionally installed hydraulic crimp-on fittings to ensure a permanent, leak-free connection. Every assembly is pressure tested to its rated working pressure before leaving the factory, ensuring reliability under demand in performance environments.

• Manufacturer Part Number: 29050
• Hose Length: 12 inches
• Fitting Size: -10 AN Female
• Fitting Angles: One Straight, one 45 Degree
• Liner Material: PTFE (Polytetrafluoroethylene)
• Fitting Material: Black Anodized Aluminum
• Construction: Hydraulically crimped and pressure tested
• Applications: Suitable for fuel, oil, nitrous, and coolant
• Compatibility Note: Not for use in high-pressure hydraulic applications

Vibrant Performance pre-assembled hose assemblies provide a professional-grade plumbing solution for demanding automotive systems. Featuring a PTFE (Polytetrafluoroethylene) inner liner, this 36-inch hose is engineered for maximum chemical resistance and compatibility with fuel, oil, nitrous, and coolant. Every assembly is professionally built using a hydraulic crimping tool to ensure a secure, leak-free connection between the hose and the black anodized aluminum fittings.

• Manufacturer Part Number: 29043
• Hose Length: 36 inches
• Fitting Sizes: -8AN Female
• Fitting Configuration: Straight to 45 Degree
• Material: PTFE-lined hose with black anodized aluminum hose ends
• Assembly: Hydraulically crimped and pressure-tested to rated working pressure

Note: These assemblies are designed for fluid transfer systems and are not intended for use in high-pressure hydraulic applications.

This Vibrant Performance Pre-Assembled Hose Assembly (MPN 29040) features a 12-inch PTFE-lined hose designed for maximum reliability in high-demand fluid systems. Engineered for use with fuel, oil, nitrous, and coolant, each assembly is professionally constructed with crimp-on fittings using a hydraulic tool to ensure a permanent, leak-free seal.

Every hose is pressure-tested to its rated working pressure before leaving the factory. The assembly is finished with black anodized aluminum hose ends for a clean look and superior corrosion resistance. Please note: these assemblies are not intended for high-pressure hydraulic applications.

• Part Number: 29040
• Length: 12 inches
• Hose Size: -8AN
• Fittings: One Straight Female and one 45-Degree Female
• Liner: PTFE for compatibility with most automotive fluids
• Fitting Material: Black Anodized Aluminum
• Construction: Professionally hydraulic-crimped and pressure tested

The Vibrant Performance 29033 Pre-Assembled Hose Assembly provides a professional-grade fluid transfer solution suitable for fuel, oil, nitrous, and coolant systems. This 36-inch hose features a PTFE inner liner, offering superior chemical resistance and thermal stability compared to traditional rubber lines.

Each assembly is manufactured with black anodized aluminum fittings that are professionally crimped using hydraulic tooling for a permanent, leak-free connection. To ensure maximum reliability, every hose assembly is pressure tested to its rated working pressure before shipment.

• Length: 36 inches
• Hose Size: -6 AN
• Fitting Configuration: Straight Female to 45-Degree Female
• Material: PTFE-lined hose with Black Anodized Aluminum hose ends
• Assembly: Professionally hydraulic crimped
• Part Number: 29033

Note: These assemblies are designed for fluid transfer and are not intended for use in high-pressure hydraulic applications.

Vibrant Performance pre-assembled hose assemblies provide a professional-grade plumbing solution for critical automotive systems. This 24-inch hose features a chemical-resistant PTFE inner liner, making it suitable for fuel, oil, nitrous, and coolant applications. The assembly is terminated with black anodized aluminum -6AN female fittings in a straight to 45-degree configuration.

To ensure maximum reliability, these lines are professionally assembled using hydraulic crimping tools for a permanent, leak-free connection. Each assembly is pressure tested to its rated working pressure to verify integrity under load. The swivel fittings allow for easier clocking and installation in tight engine bays.

• Manufacturer Part Number: 29032
• Hose Size: -6AN
• Length: 24 inches
• Fittings: (1) Straight Female, (1) 45-Degree Female Swivel
• Liner Material: PTFE (Polytetrafluoroethylene)
• Fitting Material: Black Anodized Aluminum
• Testing: Pressure tested to rated working pressure
• Application Note: Not for use in high-pressure hydraulic systems

Vibrant Performance Pre-Assembled Hose Assemblies are engineered for high-demand automotive systems including fuel, oil, nitrous, and coolant. This 36-inch line features a PTFE inner liner, providing superior chemical resistance and compatibility with modern fuels compared to standard rubber hoses.

Each assembly is professionally built using a hydraulic crimping tool to ensure a secure, leak-free connection between the hose and the black anodized aluminum hose ends. These lines are pressure tested to their rated working pressure to ensure reliability under thermal and mechanical stress. The straight female -10AN fittings allow for a streamlined installation in various fluid transfer applications.

• Manufacturer Part Number: 29023
• Hose Size: -10AN
• Length: 36 inches
• Fitting Type: Straight Female to Straight Female
• Liner Material: PTFE
• Fitting Material: Black Anodized Aluminum
• Assembly Method: Hydraulically Crimped
• Note: Not for use in high-pressure hydraulic applications

Vibrant Performance Pre-Assembled PTFE Flex Hose Assemblies provide a reliable, leak-free solution for critical fluid transfer in fuel, oil, nitrous, and coolant systems. The PTFE lining offers superior chemical resistance and prevents fuel vapor permeation, which is essential for performance and safety. Each 29013 assembly features black anodized aluminum hose ends that are professionally secured using a hydraulic crimping tool for maximum connection integrity.

• MPN: 29013
• Size: -8AN
• Length: 36 inches
• Fitting Style: Straight to Straight hose ends
• Construction: PTFE-lined hose with crimp-on black anodized aluminum fittings
• Testing: Every assembly is factory pressure-tested to its rated working pressure

Note: These hose assemblies are intended for fluid transfer systems and are not to be used in high-pressure hydraulic applications.

Vibrant Performance 29001 Pre-Assembled Hose Assemblies provide a professional-grade plumbing solution for high-performance fluid systems. Featuring a durable PTFE liner, this 18-inch assembly is engineered for broad chemical compatibility, making it ideal for fuel, oil, nitrous, and coolant applications. Unlike standard rubber-lined hoses, the PTFE construction resists degradation from modern fuel additives and high temperatures.

Each assembly features black anodized aluminum hose ends that are professionally secured using a hydraulic crimping tool, ensuring a permanent, leak-free connection. To guarantee out-of-the-box reliability, every hose is pressure tested to its rated working pressure before shipment. This assembly is designed for fluid delivery and is not intended for use in high-pressure hydraulic applications.

• Manufacturer Part Number: 29001
• Hose Size: -6AN
• Length: 18 inches
• Fittings: Straight to Straight
• Hose Material: PTFE Lined
• End Material: Black Anodized Aluminum
• Assembly Type: Factory Crimped
• Pressure tested for maximum reliability

This Vibrant Performance 1/4in (6mm) OD Polyethylene Tubing is engineered for durability and flexibility in professional automotive plumbing. Designed specifically for use with Vibrant Pneumatic Push-Lock Fittings, this tubing is suitable for a wide range of vacuum, fuel, oil, and water service applications where a reliable, high-pressure seal is required.

• Manufacturer Part Number: 2652
• Tubing Size: 1/4in (6mm) Outside Diameter
• Total Length: 10 feet
• Maximum Operating Pressure: 200 psi
• Operating Temperature Range: -90°F to 180°F (-68°C to 82°C)
• Material: High-quality polyethylene
• Color: Black

Whether you are plumbing a vacuum manifold or routing fuel vent lines, this polyethylene tubing provides the chemical resistance and thermal stability needed to withstand harsh engine bay conditions.

Vibrant Performance Polyethylene Tubing is engineered for durability and flexibility in demanding automotive plumbing applications. This black 3/8-inch (9.5mm) OD tubing is suitable for vacuum, fuel, oil, and water service, providing a reliable solution for routing fluids and air. It is designed specifically for use with Vibrant pneumatic push-lock fittings to ensure secure, leak-free connections.

• Material: Polyethylene
• Outside Diameter: 3/8in (9.5mm)
• Length: 10 feet
• Maximum Operating Pressure: 200 psi
• Operating Temperature Range: -90°F to 180°F (-68°C to 82°C)
• Color: Black
• Part Number: 2651

Vibrant Performance Polyethylene Tubing is engineered for durability and flexibility in demanding automotive plumbing and industrial applications. This 5/32" (4mm) OD black tubing is designed for vacuum, fuel, oil, and water service, providing a reliable solution for routing lines in tight engine bays.

Optimized for use with Vibrant Pneumatic Push Lock Fittings, this tubing maintains its structural integrity under pressure and across a wide thermal spectrum. The polyethylene construction offers the chemical resistance and mechanical strength required for consistent performance in low-pressure fluid and air systems.

• Part Number: 2650
• Outside Diameter: 5/32" (4mm)
• Length: 10 Feet
• Color: Black
• Maximum Operating Pressure: 200 psi
• Operating Temperature: -90°F to 180°F (-68°C to 82°C)
• Compatibility: Designed for Vibrant Pneumatic Push Lock Fittings

Vibrant Performance silicone vacuum hoses are engineered for the demanding environments of high-performance automotive systems. This 10-foot bulk pack of 3/4-inch (19mm) ID hose is constructed from high-grade silicone to ensure it will not peel, crack, or swell even when exposed to extreme engine bay conditions.

Designed specifically to maintain its internal structure under high vacuum operation, this hose prevents the collapse and flow restriction common with lower-quality materials. It is a reliable solution for plumbing vacuum-operated components, boost lines, and other critical engine sensors.

• Inside Diameter: 3/4" (19mm)
• Length: 10 ft.
• Color: Black
• Material: High-temperature silicone
• Standard: Meets SAE J20R3 specifications
• Durability: Resists collapsing under high vacuum and remains flexible
• Manufacturer Part Number: 2108

Vibrant Performance Silicone Vacuum Hose is engineered to handle the rigorous conditions of high-performance engine bays. This heavy-duty silicone tubing is designed to resist collapsing under high vacuum pressure and will not peel, crack, or swell when exposed to typical automotive heat cycles. It serves as a superior replacement for standard rubber lines that tend to harden and leak over time.

This 25-foot bulk pack offers a cost-effective solution for plumbing vacuum-actuated components such as boost controllers, wastegates, and blow-off valves. The 1/4-inch (6.35mm) inner diameter provides a secure, leak-free seal on standard barbed fittings while maintaining flexibility for easy routing in tight spaces.

• Material: High-grade temperature-resistant silicone
• Inside Diameter: 1/4" (6.35mm)
• Length: 25 ft. (Bulk Pack)
• Color: Black
• Standards: Meets SAE J20R3 specifications
• Manufacturer Part Number: 2103

Engineered for high-performance automotive environments, Vibrant Performance Silicone Vacuum Hoses are built to withstand the rigors of high-vacuum operation without collapsing. Unlike standard rubber tubing, this high-grade silicone resists peeling, cracking, and swelling over time, even when exposed to the extreme temperature cycles found in modern engine bays.

• Inner Diameter: 3/16in (4.75mm)
• Length: 25 ft. Bulk Roll
• Color: Black finish
• Standard: Meets SAE J20R3 specifications
• Durability: Resists heat-induced peeling, cracking, and swelling
• Manufacturer Part Number: 2102

This bulk pack is ideal for plumbing turbocharger wastegates, boost controllers, and replacing brittle factory vacuum lines. The silicone construction ensures a reliable seal on barb fittings, maintaining consistent pressure and vacuum signals in forced induction and naturally aspirated applications.

Vibrant Performance 2101 silicone vacuum hose is engineered for high-performance automotive environments where reliability under extreme pressure and temperature is critical. This 50-foot bulk pack of 5/32" (4mm) inner diameter hose is constructed from premium silicone designed to resist peeling, cracking, and swelling throughout its service life.

Unlike standard rubber lines, this hose is specifically formulated to maintain its structural integrity and will not collapse under high-vacuum operation. This makes it an ideal solution for plumbing turbocharger wastegates, boost controllers, blow-off valves, and intake manifold vacuum sources. It meets rigorous SAE J20R3 specifications for automotive cooling and vacuum service.

• Inner Diameter: 5/32" (4mm)
• Length: 50 ft. Bulk Pack
• Color: Black
• Material: High-grade silicone
• Standards: Meets SAE J20R3 specifications
• Manufacturer Part Number: 2101

Vibrant Performance silicone vacuum hoses are engineered for high-performance automotive environments where standard rubber lines fail. This 50-foot bulk pack is designed to plumbing vacuum sources, boost controllers, and sensors with a durable material that maintains its structural integrity under extreme thermal and pressure cycles.

Unlike standard automotive hoses, this premium silicone is formulated to avoid collapsing under high vacuum operation. It is highly resistant to peeling, cracking, and swelling, ensuring consistent performance for critical engine systems. This hose is built to demanding standards and meets SAE J20R3 specifications for reliability.

• Inner Diameter: 1/8" (3.2mm)
• Length: 50 ft. Bulk Pack
• Material: High-temperature silicone
• Compliance: Meets SAE J20R3 specifications
• Finish: Black
• Durability: Resists collapsing, cracking, and swelling
• Part Number: 2100

Vibrant Performance polyester reinforced silicone heater hoses provide superior temperature resistance and flexibility for demanding cooling system applications. This multi-ply hose features high-strength polyester fabric reinforcement to handle the pressures and heat cycles of high-performance engines while maintaining a flexible profile for easier routing.

• Inside Diameter: 1-1/4" (32mm)
• Length: 5 ft
• Material: Polyester reinforced silicone
• Operating Temperature: -58°F to 392°F (-50°C to 200°C)
• Compliance: Exceeds SAE J20R3 requirements
• Color: Black
• Part Number: 20485

This hose is specifically engineered for coolant and water service. Note: It is not suitable for fuel or oil transfer applications.

Vibrant Performance polyester reinforced silicone heater hoses are engineered for high flexibility and extreme thermal resistance in demanding cooling systems. Designed to replace standard rubber hoses that degrade and crack over time, this 1-inch (25mm) I.D. hose features multi-ply polyester reinforcement that allows it to withstand operating temperatures ranging from -58°F to 392°F (-50°C to 200°C). This makes it an ideal solution for custom coolant plumbing and high-heat engine bays.

• Inner Diameter: 1.00" (25.4mm)
• Length: 5 Feet
• Construction: Polyester reinforced silicone
• Temperature Range: -58°F to 392°F (-50°C to 200°C)
• Compliance: Exceeds SAE J20R3 requirements
• Finish: Black
• Manufacturer Part Number: 20475
• Compatibility: Not suitable for fuel or oil applications

Vibrant Performance polyester reinforced silicone heater hoses are engineered to withstand the extreme temperature and pressure cycles of high-performance engine bays. With a 1-inch (25mm) internal diameter, this hose provides exceptional flexibility for routing through tight spaces without the risk of collapsing or degrading under thermal stress.

• Durable Construction: High-grade silicone reinforced with a polyester mesh for superior structural integrity and pressure resistance.
• Extreme Temperature Range: Reliable performance from -58°F to 392°F (-50°C to 200°C), far exceeding standard rubber hose capabilities.
• Industry Compliance: Meets and exceeds SAE J20R3 requirements for heavy-duty heater hose applications.
• Dimensions: 1" (25mm) Inside Diameter (ID) provided in a 20-foot (6.1m) continuous spool.
• Finish: Features a smooth, matte black outer finish for a clean, professional aesthetic.
• Application Note: Designed specifically for coolant and water service; not compatible with fuel or oil applications.
• Manufacturer Part Number: 2047

Vibrant Performance 20465 Polyester Reinforced Silicone Heater Hose is engineered to provide superior flexibility and thermal stability for demanding cooling systems. Unlike standard rubber hoses that can degrade over time when exposed to extreme heat, this silicone hose features multi-ply polyester reinforcement to maintain its structural integrity under pressure.

This 5-foot section is ideal for custom coolant routing, heater core connections, and radiator bypasses. It is designed to handle a broad operating temperature range of -58°F to 392°F (-50°C to 200°C), far exceeding the performance of OEM-style hoses. This hose meets or exceeds SAE J20R3 requirements for durability and heat resistance.

• Part Number: 20465
• Inside Diameter (I.D.): 7/8" (22mm)
• Length: 5 ft.
• Material: Polyester reinforced silicone
• Color: Black finish
• Temperature Range: -58°F to 392°F (-50°C to 200°C)
• Standards: Exceeds SAE J20R3

Note: This hose is specifically designed for coolant and water service; it is not suitable for fuel or oil transfer applications.

Vibrant Performance polyester reinforced silicone heater hoses are engineered to handle the high-pressure and high-temperature demands of performance cooling systems. This 5-foot section of black 3/4-inch (19mm) ID hose is highly flexible, making it ideal for custom coolant routing in tight engine bays where standard rubber hoses may kink or degrade over time.

Constructed with high-grade silicone and multi-layer polyester reinforcement, this hose is designed to exceed SAE J20R3 requirements. It maintains its structural integrity across an extreme thermal range, from -58°F to 392°F (-50°C to 200°C). Note: While excellent for water and glycol-based coolants, silicone is not suitable for fuel or oil transfer.

• Inner Diameter: 3/4" (19mm)
• Length: 5 ft
• Material: Polyester Reinforced Silicone
• Operating Temperature: -58°F to 392°F (-50°C to 200°C)
• Standard: Exceeds SAE J20R3
• Color: Black
• Part Number: 20455

Vibrant Performance polyester-reinforced silicone heater hoses provide a durable and flexible solution for automotive cooling systems and custom plumbing. Designed to handle the extreme thermal cycles of high-performance engine bays, this hose maintains its flexibility and structural integrity in demanding environments.

• Internal Diameter: 5/8in (16mm)
• Length: 5 ft.
• Construction: High-strength polyester fabric reinforcement
• Operating Temperature: -58°F to 392°F (-50°C to 200°C)
• Compliance: Exceeds SAE J20R3 requirements
• MPN: 20445

This hose is specifically engineered for coolant and water transport. Please note that silicone hose is not suitable for fuel or oil applications, as these fluids will cause the material to degrade and swell.

Vibrant Performance Polyester Reinforced Silicone Heater Hoses are engineered for extreme durability and flexibility in high-temperature automotive cooling systems. This 20-foot roll of 5/8-inch (16mm) I.D. hose features a multi-layer construction with polyester reinforcement, allowing it to maintain structural integrity under pressure while remaining significantly more flexible than standard EPDM rubber hoses.

• Manufacturer Part Number: 2044
• Dimensions: 5/8-inch (16mm) Inner Diameter x 20-foot length
• Temperature Resistance: Rated for operating temperatures ranging from -58°F to 392°F (-50°C to 200°C)
• Standards: Exceeds SAE J20R3 requirements for radiator and heater hose service
• Compatibility: Designed for coolant and water delivery; not suitable for fuel or oil applications

The high-grade silicone construction is specifically designed to resist hardening, cracking, and ozone degradation, making it an ideal choice for custom plumbing or replacing worn factory heater lines in demanding engine bay environments.

Vibrant Performance polyester-reinforced silicone heater hoses are engineered for maximum flexibility and durability in demanding cooling systems. Constructed to withstand extreme temperature fluctuations ranging from -58°F to 392°F (-50°C to 200°C), this 20-foot roll is ideal for custom coolant routing where standard rubber hoses may fail or degrade.

• Material: Polyester-reinforced silicone for high burst strength and kink resistance.
• Dimensions: 1/2in (13mm) Inner Diameter (I.D.) x 20 ft. length.
• Temperature Range: -58°F to 392°F (-50°C to 200°C).
• Compliance: Exceeds SAE J20R3 requirements for heater hose.
• Finish: Black exterior.
• Compatibility: Designed for coolant and water service; not suitable for fuel or oil applications.
• Manufacturer Part Number: 2043

Vibrant Performance 20425 Polyester Reinforced Silicone Heater Hoses are engineered for extreme flexibility and durability in high-temperature cooling systems. Built to exceed SAE J20R3 requirements, this hose features a multi-ply polyester reinforcement that allows it to maintain structural integrity under pressure while withstanding a wide range of operating temperatures.

• Inner Diameter: 3/8in (10mm)
• Length: 5 ft.
• Temperature Range: -58°F to 392°F (-50°C to 200°C)
• Standards: Exceeds SAE J20R3
• Reinforcement: Polyester reinforced silicone
• Finish: Gloss Black
• Manufacturer Part Number: 20425

This hose is designed specifically for coolant and water service. Please note that silicone hose is not suitable for fuel or oil transfer applications.

Vibrant Performance reinforced silicone heater hoses are engineered for high-temperature coolant service and plumbing versatility. This 3/8-inch (10mm) inside diameter hose features a multi-ply polyester reinforcement, allowing it to maintain flexibility while managing the pressures of modern cooling systems. The black silicone construction provides superior ozone and UV resistance compared to standard EPDM rubber.

Designed to withstand extreme operating environments, this hose remains stable in temperatures ranging from -58°F to 392°F (-50°C to 200°C). It is an ideal solution for heater core lines, coolant bypasses, and other water-based fluid transfers where reliability is critical.

• MPN: 2042
• Inner Diameter: 3/8" (10mm)
• Length: 20 ft.
• Color: Black
• Material: Polyester Reinforced Silicone
• Temperature Range: -58°F to 392°F (-50°C to 200°C)
• Compliance: Exceeds SAE J20R3 requirements
• Note: Not suitable for fuel or oil applications.

Vibrant Performance reinforced silicone heater hoses are engineered to provide superior reliability in high-temperature cooling systems compared to standard rubber. This 5/16" (8mm) ID hose features a polyester fabric reinforcement that increases pressure resistance while maintaining the flexibility needed for complex routing in tight engine bays.

• Inner Diameter: 5/16" (8mm)
• Length: 5 Feet
• Material: Polyester reinforced silicone
• Temperature Range: -58°F to 392°F (-50°C to 200°C)
• Compliance: Exceeds SAE J20R3 requirements
• Color: Black
• Manufacturer Part Number: 20415

Designed specifically for coolant fluid service, this hose is built to withstand extreme thermal cycles without hardening or cracking. Please note: This silicone hose is not compatible with fuel or oil applications.