Vibrant Performance polyester-reinforced silicone heater hoses are engineered for high-performance cooling systems where standard rubber hoses fail. This 1.25-inch (32mm) I.D. hose is extremely flexible and designed to maintain its structural integrity under the high pressures and temperatures of modern engine bays.

Constructed with high-grade silicone and reinforced with durable polyester fabric, this hose exceeds SAE J20R3 requirements. It is rated for extreme operating environments, withstanding temperatures from -58°F to 392°F (-50°C to 200°C). Please note: This hose is specifically designed for coolant service and is not suitable for fuel or oil applications.

• Manufacturer Part Number: 2048
• Inside Diameter: 1-1/4" (32mm)
• Length: 20 ft.
• Temperature Range: -58°F to 392°F (-50°C to 200°C)
• Reinforcement: High-strength polyester
• Material: High-temp silicone
• Compliance: Exceeds SAE J20R3 standards
• Color: Black

Vibrant Performance polyester-reinforced silicone heater hoses are engineered to withstand the extreme thermal demands of high-performance engine bays. This 1/2-inch (13mm) internal diameter hose is constructed from premium silicone reinforced with a polyester braid, providing superior flexibility and pressure resistance compared to standard EPDM rubber lines.

Designed primarily for coolant and heater fluid service, this hose is rated for a broad operating temperature range of -58°F to 392°F (-50°C to 200°C). Its durable construction exceeds SAE J20R3 requirements, ensuring long-term reliability against degradation and burst failure.

• Inner Diameter: 1/2" (13mm)
• Length: 5 ft.
• Material: Polyester reinforced silicone
• Temperature Range: -58°F to 392°F (-50°C to 200°C)
• Standards: Exceeds SAE J20R3 requirements
• Finish: Black
• Application: Coolant and heater service only; not suitable for fuel or oil transfer
• Manufacturer Part Number: 20435

The Vibrant Performance 18423 Stainless Steel Braided PTFE Flex Hose is engineered for high-demand automotive plumbing applications where durability and fluid integrity are paramount. This -3 AN hose features a high-grade PTFE inner liner that effectively eliminates fuel vapor permeation, making it an excellent choice for performance fuel systems and racing setups where gas odors must be contained.

Constructed with a robust stainless steel outer braid, this hose provides exceptional protection against abrasion and corrosion while maintaining the flexibility required for complex routing. It is suitable for a wide range of fluids, including all common race fuels, oils, transmission, clutch, power steering, and coolant systems.

• Inner Liner: High-durability flexible PTFE
• Outer Braid: Corrosion-resistant Stainless Steel
• Hose Size: -3 AN
• Length: 20ft Roll
• Operating Temperature Range: -94°F to 480°F (-70°C to 250°C)
• Fluid Compatibility: Race Fuels, Oil, Transmission, Clutch, Power Steering, Coolant
• Manufacturer Part Number: 18423

Vibrant Performance Stainless Steel Braided PTFE Flex Hoses (Part 18422) provide a robust solution for high-performance automotive plumbing. This -12 AN hose features a high-grade PTFE inner liner that is specifically designed to eliminate fuel vapor permeation, preventing the "fuel smell" common with standard rubber-lined hoses in garages or enclosed cabins.

The outer stainless steel braid offers superior protection against high-pressure bursts, external abrasion, and corrosion. This hose is engineered to handle extreme environments, making it suitable for fuel systems (including E85 and methanol), oil lines, transmission coolers, power steering, and coolant applications. It is compatible with all commonly used race fluids and maintains structural integrity across a massive temperature spectrum.

• Series: Braided PTFE Flex Hose
• Part Number: 18422
• Hose Size: -12 AN
• Length: 10 Foot Roll
• Inner Liner: PTFE (Polytetrafluoroethylene)
• Outer Cover: Stainless Steel Braid
• Operating Temperature: -94°F to 480°F (-70°C to 250°C)
• Applications: Fuel, Oil, Coolant, Transmission, Clutch, and Power Steering

The Fragola Performance Systems 601029 is a heavy-duty -10AN PTFE hose engineered for high-performance automotive plumbing. Built with a Polytetrafluoroethylene (PTFE) inner core, this hose provides superior chemical resistance compared to traditional rubber, making it an ideal choice for modern pump gas, E85, methanol, oil, and coolant systems.

The black outer cover serves two purposes: it protects the inner assembly from abrasion and provides a sleek, professional finish in the engine bay. Unlike standard nitrile hoses, the PTFE liner effectively eliminates fuel vapor permeation—preventing the "gas smell" often found in performance builds—and offers a significantly longer service life under high temperatures and pressures.

• Manufacturer Part Number: 601029
• Hose Size: -10AN
• Length: 10 Feet
• Material: PTFE (Polytetrafluoroethylene)
• Finish: Protective Black Cover
• Application: Compatible with fuel, E85, oil, and coolant
• Features: High temperature resistance and zero fuel vapor permeation

Note: This hose must be used with specific PTFE-style hose ends to ensure a secure, leak-free seal.

This Nitrous Express (NX) 4AN stainless steel braided hose is engineered for high-pressure nitrous applications where reliability is critical. Measuring 4 feet in length, this hose features a durable stainless steel outer braid that protects against abrasion and expansion under pressure, finished in a clean black coating for a professional engine bay appearance.

Internally, the hose is constructed with a Teflon (PTFE) lining. This material provides exceptional chemical resistance and prevents the degradation commonly found in standard rubber lines when exposed to high-velocity nitrous oxide or fuel. The ends are equipped with pre-installed, high-quality anodized fittings for a secure, leak-free connection to your nitrous solenoid, bottle, or distribution block.

• Manufacturer Part Number: 11148
• Hose Size: -4AN
• Length: 4 Feet (48 inches)
• Liner Material: Teflon (PTFE)
• Outer Material: Braided Stainless Steel
• Finish: Black with Anodized Fittings

Vibrant Performance Push-On Style CPE flex hoses provide a versatile, lightweight plumbing solution for various automotive fluid systems. Engineered specifically for use with Vibrant Push-On Style hose ends and fittings, this hose is suitable for oil, water, fuel, coolant, and vacuum service in light-duty applications.

Constructed from high-grade CPE (Chlorinated Polyethylene) synthetic rubber, this hose maintains its integrity and flexibility across a wide temperature spectrum. The push-on design allows for a secure fit on compatible barbed fittings, simplifying plumbing for non-high-pressure environments.

• Part Number: 16316
• Hose Size: -6AN
• Inside Diameter: 0.38 in
• Length: 10 Foot Roll
• Material: CPE Synthetic Rubber
• Operating Temperature Range: -40°F to 212°F (-40°C to 100°C)
• Compatibility: Designed for use with push-on style fittings only
• Application: Light-duty oil, water, fuel, coolant, and vacuum

Fits select 1980-2018 Acura, AM General, Audi, BMW, Buick, Cadillac, Chevrolet, Dodge, and Eagle models.

Maintain your vehicle's cooling system integrity with the Gates 28409 SS (Standard Service) Heater Hose. This 50-foot bulk spool is engineered for technicians and owners requiring a reliable, cut-to-length solution for replacing brittle or leaking factory heater lines. Designed to facilitate efficient coolant transfer between the engine and heater core, this hose is built to withstand high temperatures and the corrosive environment of automotive cooling systems.

• Manufacturer Part Number: 28409
• Inside Diameter: 3/8 inch
• Length: 50 feet
• Series: SS (Standard Service)
• Construction: Heat-resistant rubber compound designed to resist electrochemical degradation
• Compatibility: Replaces standard 3/8" OE heater hoses on a wide range of passenger cars and light trucks

The Vibrant Performance 29041 Pre-Assembled Hose Assembly provides a reliable, leak-free plumbing solution for high-performance automotive systems. This 18-inch hose features a durable PTFE lining, making it compatible with a wide range of fluids including fuel, oil, nitrous, and coolant. To ensure maximum reliability under pressure, each assembly is professionally secured using a hydraulic crimping tool and pressure tested to its full rated working pressure.

• Part Number: 29041
• Length: 18 inches
• Fitting Size: -8 AN Female
• Fitting Angles: Straight to 45 Degree
• Material: PTFE inner liner with Black Anodized Aluminum hose ends
• Construction: Hydraulically crimped-on fittings for a permanent seal
• Applications: Fuel, oil, nitrous, and coolant systems
• Compatibility: Not for use in high-pressure hydraulic applications

This 18-inch Vibrant Performance PTFE Hose Assembly (MPN: 29021) provides a professional-grade fluid transfer solution for fuel, oil, nitrous, and coolant systems. Engineered for long-term reliability, these assemblies utilize a PTFE liner that offers superior chemical resistance and prevents fuel vapor permeation.

Each hose is equipped with black anodized aluminum -10AN female straight fittings on both ends. These are secured using a precision hydraulic crimping tool to ensure a permanent, leak-free connection that outperforms traditional screw-together fittings. For added peace of mind, every assembly is factory pressure tested to its rated working pressure before shipment.

• Length: 18 inches
• Fitting Size: -10AN Female (Straight to Straight)
• Liner Material: PTFE (Polytetrafluoroethylene)
• Fitting Material: Black Anodized Aluminum
• Construction: Hydraulically crimped for maximum security
• Compatibility: Suitable for fuel, oil, nitrous, and coolant
• Note: Not for use in high-pressure hydraulic steering or braking applications

Vibrant Performance -6 AN Nylon Braided Flex Hose (MPN: 11986R) provides a high-strength, flexible solution for plumbing various automotive fluid systems. This 5-foot roll features a reinforced CPE synthetic rubber inner liner surrounded by a two-tone black and red nylon braided cover, offering excellent abrasion resistance and a professional finish for custom engine bays.

This flex hose is engineered to handle oil, water, fuel, coolant, and vacuum service. While compatible with E85 and methanol, users should note that fumes may permeate the CPE liner if fuel is left stagnant for extended periods; for dedicated long-term ethanol use, PTFE-lined hoses are recommended. This hose is not suitable for high-pressure brake or hydraulic lines, or for in-tank submersion.

• Manufacturer Part Number: 11986R
• Size: -6 AN
• Length: 5 ft. Roll
• Liner Material: Reinforced CPE Synthetic Rubber
• Outer Cover: Two-Tone Black/Red Nylon Braid
• Operating Temperature: -40°F to 300°F (-40°C to 150°C)
• Applications: Oil, Water, Fuel, Coolant, and Vacuum

This 5-foot roll of Vibrant Performance -4 AN Two-Tone Black/Blue Nylon Braided Flex Hose (MPN: 11984B) provides a professional, high-performance solution for plumbing automotive fluid systems. Engineered for versatility, this hose features a reinforced CPE synthetic rubber inner liner surrounded by a durable nylon braided cover that offers excellent abrasion resistance and a distinct two-tone aesthetic.

Suitable for oil, water, fuel, coolant, and vacuum service, this hose is designed to withstand a wide range of operating conditions. While compatible with E85 and methanol, users should be aware that vapors may permeate the CPE liner if fuel remains stagnant for long periods; for dedicated long-term ethanol or methanol storage, a PTFE-lined hose is recommended.

• Size: -4 AN
• Length: 5 Foot Roll
• Inner Liner: Reinforced CPE synthetic rubber
• Outer Cover: Black and blue two-tone nylon braid
• Operating Temperature: -40°F to 300°F (-40°C to 150°C)
• Manufacturer Part Number: 11984B

Notice: This hose is not suitable for use as brake lines or other high-pressure hydraulic lines. It is not recommended for in-tank applications where it would be submerged in fuel or oil.

Vibrant Performance -10 AN Nylon Braided Flex Hose (11970B) is engineered for high-performance fluid transfer in demanding automotive environments. This 10-foot roll features a two-tone black and blue nylon braided outer cover that provides superior abrasion resistance while protecting the reinforced CPE synthetic rubber inner liner. Designed for plumbing versatility, this hose is suitable for oil, water, coolant, and vacuum service, as well as fuel applications including E85 and methanol.

• Manufacturer Part Number: 11970B
• Size: -10 AN (10AN)
• Length: 10 Feet
• Inner Liner: Reinforced CPE Synthetic Rubber
• Outer Cover: Nylon Braided (Two-Tone Black/Blue)
• Temperature Range: -40°F to 300°F (-40°C to 150°C)
• Fluid Compatibility: Oil, Water, Fuel, Coolant, Vacuum

Note: While compatible with E85 and methanol, fuel fumes may permeate through CPE-lined hoses when fluid is left stagnant for extended periods. This hose is not for use in brake systems, high-pressure hydraulic lines, or in-tank submersion applications.

Vibrant Performance 11960 provides a versatile and durable fluid transfer solution with this -10 AN Black Nylon Braided Flex Hose. Engineered for demanding engine bays, this 2-foot roll features a reinforced CPE (Chlorinated Polyethylene) synthetic rubber inner liner protected by a high-strength nylon braided cover for superior abrasion resistance and a clean, professional finish.

• MPN: 11960
• Hose Size: -10 AN
• Length: 2 Foot Roll
• Inner Liner: Reinforced CPE Synthetic Rubber
• Outer Cover: Black Nylon Braid
• Temperature Range: -40°F to 300°F (-40°C to 150°C)

This hose is suitable for oil, water, fuel, coolant, and vacuum service. While compatible with E85 and methanol, the CPE liner is susceptible to fuel vapor permeation if these fluids are left stagnant for long periods; for extended E85/methanol use, a PTFE-lined hose is recommended. Note: This hose is not for use in braking systems, high-pressure hydraulic lines, or in-tank (submerged) applications.

Vibrant Performance -16 AN Stainless Steel Braided Flex Hose (MPN 11943) provides a durable and reliable plumbing solution for high-performance automotive fluid systems. This 5-foot roll features a high-grade stainless steel braided cover for superior abrasion resistance, surrounding a reinforced CPE (Chlorinated Polyethylene) synthetic rubber inner liner for structural integrity under vacuum or pressure.

• Manufacturer Part Number: 11943
• Fluid Compatibility: Suitable for oil, water, fuel, coolant, and vacuum service.
• Temperature Range: -40°F to 300°F (-40°C to 150°C).
• Material: 300 Series stainless steel outer braid with a reinforced CPE synthetic rubber core.
• E85/Methanol Use: Compatible for use; however, fuel fumes may permeate the hose if left stagnant for long periods. For extended E85 service, consider PTFE-lined hoses.
• Application Notes: Not for use as brake lines or high-pressure hydraulic lines. Not recommended for in-tank applications (submersion in fuel/oil).

Fits 2004-2020 Subaru WRX STI equipped with a 3.3-inch (84mm) FP (Forced Performance) turbocharger.

The Torque Solution Non-Recirculated Turbo Inlet Hose is engineered for high-performance Subaru builds utilizing larger 84mm compressor inlets. By eliminating the recirculation port, this hose provides a smoother, more direct internal airway, reducing intake turbulence and allowing your turbocharger to draw in air with less restriction. Its heavy-duty construction is designed to maintain structural integrity under high vacuum, preventing the collapse common in factory or inferior aftermarket inlet hoses.

• Designed specifically for 3.3in / 84mm FP Turbo compressor inlets
• Non-recirculated configuration for simplified, high-flow setups
• Streamlined internal bore for maximum airflow efficiency
• Compatible with 2004-2020 Subaru STI models
• Finish: Black
• Manufacturer Part Number: TS-SU-598-NR

Fits 2015-2017 Subaru WRX Base, Limited, and Premium.

The Radium Engineering Fuel Feed Line Kit is a direct replacement for the factory fuel feed tube that connects the firewall hard line to the engine. This kit addresses the limitations of the OEM hose and hard line assembly, providing a more reliable and durable solution for fuel delivery in the engine bay of your FA20-powered WRX.

• Direct replacement for the firewall-to-engine OEM fuel feed tube
• Maintains consistent fuel delivery to the engine
• High-quality fittings and hose construction for long-term durability
• Designed specifically for the 2015-2017 Subaru WRX chassis
• Manufacturer Part Number: 20-0266

Fits select 1984-2016 vehicles from Acura, Audi, BMW, Buick, Cadillac, Chevrolet, Chrysler, Dodge, Eagle, Ford, GMC, Honda, Isuzu, Jaguar, Kia, Mazda, and Mitsubishi.

The Gates 28408 Safety Stripe (SS) Heater Hose is engineered for reliable coolant transfer in passenger cars and light trucks. This bulk 50-foot roll provides ample length for custom routing, multiple vehicle repairs, or professional shop use. Designed to withstand the rigors of engine compartment heat and ozone exposure, this hose maintains flexibility and provides a leak-resistant connection to factory heater cores and water pumps.

• Manufacturer Part Number: 28408
• Inside Diameter (ID): 5/16 inch (approx. 8mm)
• Length: 50 ft Roll
• Series: Safety Stripe (SS)
• Construction: High-performance rubber engineered for heat and electrochemical degradation resistance
• Application: Designed for standard heater hose applications (not for fuel or oil transfer)

Fits 1998-2002 Dodge Ram 2500 and 3500 trucks equipped with the 5.9L Cummins engine.

Refresh your cooling system and prevent potential leaks with the Fleece Performance Heater Feed and Return Hose Kit. Designed specifically for second-generation Cummins applications, this kit replaces the factory heater core supply and return lines to ensure reliable coolant flow to your cabin HVAC system. It is an essential maintenance solution for high-mileage trucks where original rubber lines have become brittle, soft, or prone to failure from years of heat cycles and vibration.

• Direct-fit replacement for factory heater hoses
• Includes both heater feed and return lines
• Engineered for long-term durability in heavy-duty diesel environments
• Manufacturer Part Number: FPE-CUMM-HCL-KIT-9902

Fits 2003-2012 Dodge Ram 2500 and 3500 trucks (5.9L / 6.7L).

Maintain cooling system integrity and prevent unexpected coolant loss with the Fleece Performance Heater Feed and Return Hose Kit. This kit is designed specifically for 3rd and early 4th generation Cummins-powered Dodge Ram trucks, replacing the vulnerable factory heater hoses that often degrade due to high engine bay temperatures and pressure cycles. These hoses ensure a secure connection between the engine and the heater core, providing reliable heating performance and engine cooling.

• Direct replacement for aging or brittle factory heater lines
• Engineered for the high-thermal demands of Cummins diesel engines
• Includes both feed and return hoses for a complete service
• Compatible with 5.9L and 6.7L 24V Cummins platforms
• Manufacturer Part Number: FPE-CUMM-HCL-KIT-0312

Maintain or repair your air suspension system with this Firestone Air Line Service Kit. This 18-foot length of 0.25-inch OD tubing is engineered specifically for servicing Firestone Ride-Rite, Sport-Rite, and Coil-Rite air helper spring systems. The high-visibility red finish allows for easy identification and precise routing during installation.

Constructed from durable plastic designed for pneumatic automotive applications, this tubing replaces worn, pinched, or leaking lines to restore the integrity of your load-leveling system. Whether you are performing routine maintenance or extending a line for a custom compressor setup, this service kit provides the necessary length and OE-spec diameter for a secure fit.

• Manufacturer Part Number: 0938
• Outside Diameter: 0.25 in. (1/4")
• Overall Length: 18 ft.
• Tubing Color: Red
• Material: High-strength plastic
• System Compatibility: Firestone Ride-Rite, Sport-Rite, and Coil-Rite

Fits 1994-1998 Volvo 850, S70, and V70 Turbo models.

This do88 idle control hose is a high-performance replacement for the factory rubber component, which is prone to drying out, cracking, and causing vacuum leaks over time. A failure in the idle control system often results in erratic idling, stalling, or poor throttle response. Constructed from multi-layer silicone, this hose provides superior heat resistance and longevity compared to standard OEM rubber.

• Direct replacement for the factory idle control valve (IAC) hose
• High-grade silicone construction for improved durability against heat and ozone
• Maintains structural integrity under engine bay temperatures
• Smooth internal bore to ensure consistent airflow
• Color: Black
• Manufacturer Part Number: DO88-KIT8-6S

Fits 2004-2013 Volvo C30, C70, S40, and V50 Turbo models.

This do88 heater hose kit is designed to replace the standard factory rubber hoses, which often degrade, crack, and leak over time due to the high temperatures and pressures found in turbocharged engine bays. By upgrading to these reinforced hoses, you ensure a more reliable cooling system and protect your engine from potential overheating issues caused by hose failure.

• Engineered specifically for Volvo P1-platform turbo engines (C30/C70/S40/V50)
• High-temperature resistant construction for superior durability over OE rubber
• Designed for a precise, direct-fit installation into the factory heater system
• Resistant to swelling and cracking caused by heat cycling
• Manufacturer Part Number: DO88-KIT39S

The Walbro (TI Automotive) TF0001604 fuel hose is a specialized component engineered to support high-performance fuel pump and module installations. With a 236mm length and an 8mm internal diameter (ID), this hose provides a robust plumbing solution for fuel systems requiring precise routing and reliable fluid transfer.

As an authentic TI Automotive accessory, this hose is designed to withstand the chemical demands of modern fuels while maintaining structural integrity within the fuel tank environment. It is an essential component for custom fuel system builds or when replacing worn lines during a pump upgrade to ensure a leak-free, high-pressure connection.

• Genuine TI Automotive / Walbro installation accessory
• Manufacturer Part Number: TF0001604
• Internal Diameter: 8mm
• Total Length: 236mm
• Compatible with Walbro high-performance fuel pumps and modules
• Designed for durability in specialized or custom fuel system configurations

This Vibrant Performance Pre-Assembled Hose Assembly (MPN: 29081) provides a professional-grade plumbing solution for critical automotive fluid systems. Each 18-inch line features a chemical-resistant PTFE lining, making it ideal for fuel, oil, nitrous, and coolant applications where vapor permeation resistance is essential. To ensure a permanent, leak-free connection, the hose ends are secured using a hydraulic crimping tool rather than traditional screw-together fittings.

• Construction: 18-inch PTFE-lined hose for high chemical compatibility and durability.
• Fittings: Equipped with one straight and one 90-degree -10AN female fitting.
• Finish: Black anodized aluminum hose ends for corrosion resistance and a clean aesthetic.
• Reliability: Every assembly is factory pressure-tested to its rated working pressure to ensure integrity under load.
• Manufacturer Part Number: 29081

Note: These hose assemblies are designed for standard fluid transfer and are not intended for use in high-pressure hydraulic applications.

Vibrant Performance Pre-Assembled Hose Assemblies provide a professional-grade plumbing solution for demanding automotive systems. This 12-inch assembly features a chemical-resistant PTFE lining, making it compatible with a wide range of fluids including fuel, oil, nitrous, and coolant. Each line is professionally assembled using a hydraulic crimping tool to ensure a secure, leak-free connection between the hose and the black anodized aluminum fittings.

To guarantee reliability under pressure, every assembly is tested to its rated working pressure before leaving the facility. This specific hose features one straight and one 90-degree -10 AN female fitting, providing the necessary clearance for tight routing in performance plumbing applications.

• Manufacturer Part Number: 29080
• Hose Length: 12 inches
• Hose Size: -10 AN
• Fittings: -10 AN Female Straight to -10 AN Female 90 Degree
• Material: PTFE-lined hose with black anodized aluminum hose ends
• Construction: Professionally hydraulic crimped and pressure tested
• Compatibility: Suitable for fuel, oil, nitrous, and coolant systems
• Note: Not for use in high-pressure hydraulic applications

This Vibrant Performance 24-inch pre-assembled hose assembly (MPN: 29072) is engineered for high-reliability fluid transfer in fuel, oil, nitrous, and coolant systems. The PTFE-lined core provides excellent chemical resistance and prevents fuel vapor permeation, making it a professional-grade solution for modern plumbing requirements.

Each assembly is professionally constructed using a hydraulic crimping tool to ensure a permanent, leak-free connection between the hose and the black anodized aluminum fittings. To ensure out-of-the-box reliability, every hose is pressure-tested to its rated working pressure before leaving the factory.

• Manufacturer Part Number: 29072
• Length: 24 inches
• Fitting Size: -8AN Female
• Fitting Configuration: One Straight and one 90 Degree
• Hose Material: PTFE lined with braided reinforcement
• Fitting Material: Black Anodized Aluminum
• Applications: Fuel, Oil, Nitrous, and Coolant
• Assembly Method: Hydraulically crimped and pressure tested

Note: These pre-assembled hose lines are not designed for use in high-pressure hydraulic steering or braking applications.

Vibrant Performance pre-assembled hose assemblies offer a professional-grade plumbing solution for high-demand fluid systems. This 36-inch hose features a PTFE inner liner, providing superior resistance to corrosive fluids compared to standard rubber lines. It is designed to handle fuel (including E85), oil, nitrous, and coolant without degradation. Each assembly is equipped with black anodized aluminum -6AN female fittings—one straight and one 90-degree—permanently secured using a hydraulic crimping tool to ensure a leak-free connection under pressure.

• Part Number: 29063
• Hose Length: 36 inches
• Fitting Size: -6AN Female
• Fitting Angles: Straight to 90 Degree
• Liner Material: PTFE (Polytetrafluoroethylene)
• Hose End Material: Black Anodized Aluminum
• Construction: Hydraulically crimped and pressure tested to rated working pressure

Note: These assemblies are intended for automotive fluid transfer and are not for use in high-pressure hydraulic applications.

The Vibrant Performance 29062 is a professional-grade -6 AN PTFE hose assembly designed for reliable fluid transfer in high-performance environments. This 24-inch line comes pre-assembled and pressure-tested to its rated working pressure, ensuring a leak-free seal for critical plumbing. The PTFE lining provides superior chemical resistance, making it suitable for fuel, oil, nitrous, and coolant applications.

Built for durability and ease of installation, each assembly features black anodized aluminum hose ends that are secured using a professional hydraulic crimping tool. These assemblies replace the need for manual hose assembly while providing the security of a factory-crimped connection. Please note: these assemblies are not intended for high-pressure hydraulic applications.

• Manufacturer Part Number: 29062
• Hose Size: -6 AN
• Hose Length: 24 inches
• Fitting Configuration: Female Straight to 90 Degree
• Hose Material: PTFE Lined
• Fitting Material: Black Anodized Aluminum
• Compatibility: Fuel, oil, nitrous, and coolant
• Construction: Hydraulically crimped and pressure tested

Vibrant Performance Pre-Assembled Hose Assemblies are engineered for plumbing reliability in demanding automotive systems. This 18-inch assembly features a PTFE liner, making it highly resistant to chemical degradation and ideal for use with fuel, oil, nitrous, and coolant. The PTFE lining also acts as a barrier against fuel vapor permeation, a common issue with standard rubber hoses.

Each assembly is professionally built using a hydraulic crimping tool to ensure a secure, leak-free connection between the hose and the black anodized aluminum fittings. To ensure out-of-the-box performance, every hose is pressure-tested to its rated working pressure. This specific assembly features a -6AN female straight fitting on one end and a -6AN female 90-degree fitting on the other.

• Length: 18 inches
• Hose Size: -6AN
• Fittings: Female Straight to 90 Degree
• Hose Material: PTFE-lined
• Fitting Material: Black Anodized Aluminum
• Construction: Hydraulically crimped and pressure tested
• Manufacturer Part Number: 29061

Note: These hose assemblies are not intended for use in high-pressure hydraulic applications.