Fits 2013+ Hyundai Gamma GDI (1.6L) Turbo engines.

Engineered for high-output racing and performance street builds, this JE Pistons forged piston kit provides the structural integrity and weight savings required for forced induction applications. These pistons are forged and machined in the USA from 2618 aluminum alloy, delivering the high tensile strength necessary for high-demand environments. The proprietary Forged Side Relief (FSR) design minimizes friction and power loss by reducing skirt width while saving weight with a shorter wrist pin configuration.

• Bore Size: 77.5mm
• Dish Volume: -8.7cc
• Material: 2618 T6 Forged Aluminum
• FSR (Forged Side Relief) forging design for reduced friction and weight
• Accumulator groove helps manage combustion gas pressure and improve ring seal
• Skirt coating (application dependent) reduces wear and operating noise
• Includes JE Pro Seal premium piston rings, high-quality wrist pins, and locks
• Manufacturer Part Number: 361286

Engineered for high-performance Honda K20C engines, this set of four JE Pistons Ultra Series forged pistons (MPN 361278) is designed to withstand the extreme cylinder pressures of high-boost racing applications. These pistons utilize proprietary Aligned Grain Flow technology to maximize tensile strength and durability, ensuring they handle the stresses of power-adder builds better than standard forgings.

Each piston features a ceramic-based thermal barrier crown coating to reflect heat back into the combustion chamber, improving exhaust gas scavenging and reducing piston temperatures. To minimize friction and cylinder wall wear, the skirts are treated with a specialized coating that also reduces operating noise during cold starts. Lateral gas ports are included to maintain a precise ring seal even under high RPM and peak boost conditions.

• Bore Size: 86mm
• Compression Ratio: 10.0:1
• Forging: Aligned Grain Flow technology for maximum tensile strength
• Thermal Barrier: Ceramic crown coating reflects heat and protects the piston
• Skirt Coating: Friction-reducing treatment for longevity and wear resistance
• Gas Ports: Lateral ports for optimized ring sealing
• Wrist Pins: Includes premium thick-wall Trend Performance wrist pins
• Origin: 100% Made in the USA

Fits 1996-2007 Mitsubishi Lancer Evolution IV, V, VI, VII, VIII, and IX (4G63).

Wiseco Professional Series forged pistons are engineered for high-horsepower Mitsubishi 4G63 builds where reliability under extreme cylinder pressure is mandatory. Forged from high-tensile 2618 aluminum alloy, these pistons feature an asymmetric skirt design to minimize friction and weight while maintaining stability at high RPM. Each piston is treated with Wiseco's ArmorGlide skirt coating to reduce drag and provide a seizure-resistant surface for increased longevity in heavy-duty racing environments.

This set includes precision-machined features such as forced pin oiling for superior wrist pin lubrication and anti-detonation grooves to protect the ring land by disrupting pressure waves. The fully machined crowns and precision-cut ring grooves ensure maximum combustion seal and consistent performance across all cylinders.

• Manufacturer Part Number: K666M855AP
• Bore Size: 85.50mm (+.020 over)
• Compression Ratio: 9.5:1
• Material: 2618 Forged Aluminum Alloy
• Skirt Coating: ArmorGlide Friction-Reduction Coating
• Includes: Premium piston rings, wrist pins, and locks
• Features: Asymmetric skirt, forced pin oiling, and anti-detonation grooves

Designed for the Volkswagen 2.0 TSI Turbo engine (2008+), this JE Pistons forged piston kit provides the thermal stability and structural integrity required for high-boost applications. Machined from high-tensile 2618 aluminum alloy, these pistons utilize the proprietary Forged Side Relief (FSR) design to reduce friction and reciprocating weight without compromising the strength of the piston crown or ring lands.

• Precision Engineering: 82.5mm standard bore size with a -7.1cc dome volume.
• FSR Forging: Optimized skirt width reduces surface contact to minimize power loss while improving wrist pin support.
• Enhanced Sealing: Includes an accumulator groove to manage combustion gas pressure, reducing ring flutter and maintaining a consistent seal.
• Advanced Coating: Skirt coating reduces wear on both the piston and the cylinder walls during high-temperature operation and cold starts.
• Complete Assembly: Each kit includes high-quality wrist pins, wire locks, and a JE Pro Seal premium piston ring set.
• Technical Spec: Manufactured in the USA; MPN 329244.

Fits 1994-2001 Acura Integra GS-R (B18C1).

This CP Pistons Piston & Ring Set (SC7015-4) is engineered for the B18C1 engine found in the 1994-2001 Acura Integra GS-R. These high-performance forged pistons are designed to withstand the rigors of high-RPM use, providing a reliable foundation for street and track builds. Each set features a 81.0mm bore and maintains a 9.8:1 compression ratio for consistent power delivery.

• Manufacturer Part Number: SC7015-4
• Bore Diameter: 81.0mm
• Compression Ratio: 9.8:1
• Engine Compatibility: Acura B18C1
• Includes: High-strength forged pistons, premium piston rings, and wrist pins

Vehicle Fitment:

Fits 2008-2014 Mitsubishi Lancer Evolution GSR, MR, and MR Touring models equipped with the 4B11-T engine.

Wiseco Professional Series forged racing pistons are engineered for the extreme thermal and mechanical loads of high-output race builds. Machined in the USA from 2618 aluminum alloy, these pistons offer superior tensile strength and fatigue resistance compared to standard casting. Each piston features Wiseco’s proprietary ArmorGlide skirt coating to minimize friction, reduce wear, and ensure quieter operation even in heavy-duty performance applications.

• Manufacturer Part Number: K636M87
• Material: 2618 Aluminum Alloy for maximum durability
• Piston Volume: -4.5cc
• ArmorGlide Skirt Coating: Reduces friction and resists seizure
• Precision-machined ring grooves and anti-detonation grooves for improved sealing
• Fully machined crown features for optimized combustion
• Forced pin oiling for enhanced wrist pin lubrication
• Includes premium piston rings, wrist pins, and clips

This Wiseco Professional Series forged piston kit is engineered for Volkswagen 1.8T 8V engines, providing a high-strength solution for heavy to severe duty racing builds. Forged and machined in the USA from 2618 aluminum alloy, these pistons offer the superior tensile strength required for high-boost or high-output applications where factory components fail.

Each piston in the K563M81AP kit features a -7cc dish and an 81mm bore, precision-machined to ensure tight tolerances and optimal ring seal. The integrated ArmorGlide skirt coating reduces friction and resists seizure for quieter operation and a longer service life. Forged pin oiling and fully machined crowns come standard to handle the thermal and mechanical stresses of professional-level engine builds.

• Engineered for Volkswagen 1.8T 8V engines (1.8T)
• Material: 2618 Forged Aluminum for maximum heat and stress resistance
• Bore Size: 81mm
• Piston Volume: -7cc Dished
• ArmorGlide Skirt Coating for friction reduction and seizure resistance
• Forced pin oiling for improved wrist pin lubrication
• Includes premium rings and hardware
• Manufacturer Part Number: K563M81AP

Fits 2003-2009 Dodge Neon SRT-4 and Chrysler PT Cruiser models.

Wiseco Professional Series forged racing pistons are engineered for high-performance builds requiring extreme durability under heavy to severe duty cycles. Machined in the USA from high-tensile 2618 aluminum, these pistons are designed to handle the increased cylinder pressures and thermal loads of turbocharged SRT-4 engines. Each piston features Wiseco’s proprietary ArmorGlide skirt coating to reduce friction, prevent seizure, and ensure quieter operation. The fully machined crowns include anti-detonation grooves and precision ring grooves to optimize combustion sealing.

• Forged from 2618 aluminum for superior tensile strength in racing applications
• ArmorGlide skirt coating for friction reduction and wear resistance
• Forced pin oiling for improved wrist pin lubrication at high RPMs
• Precision-machined crown and anti-detonation grooves for enhanced ring seal
• Complete kit including premium piston rings and wrist pins

• Manufacturer Part Number: K562M88
• Bore Size: 88.0mm
• Compression Height: 1.400"
• Piston Volume: -17cc

Designed for high-output Acura 4-valve race builds, this Wiseco Professional Series Piston Kit is engineered to handle extreme cylinder pressures and high-RPM stress. These pistons are forged from high-tensile 2618 aluminum alloy, providing the thermal stability and strength required for severe-duty applications. The strutted forging design optimizes the strength-to-weight ratio, ensuring durability without excessive reciprocating mass.

Each piston features Wiseco’s ArmorGlide skirt coating to reduce friction and prevent scuffing, alongside a fully machined crown for optimized flame travel. Precision-engineered anti-detonation grooves and forced pin oiling ensure long-term reliability in competitive environments.

• Material: Forged 2618 Aluminum for superior tensile strength
• Bore Size: 87.50mm
• Dome Volume: +8cc domed crown for increased compression
• Coating: ArmorGlide skirt coating for reduced friction and noise
• Features: Forced pin oiling, precision ring grooves, and anti-detonation grooves
• Includes: Premium ring set, wrist pins, and locks
• MPN: K573M875AP

Fits select 1990-1992 Mitsubishi Eclipse, Galant VR-4, Eagle Talon TSi, and Plymouth Laser RS. This Wiseco Professional Series forged piston kit is engineered for high-output turbo builds where reliability and strength are paramount. Forged and machined in the USA from 2618 aluminum alloy, these pistons offer superior tensile strength compared to standard alloys, making them ideal for heavy to severe duty racing applications.

Each kit includes Wiseco’s proprietary ArmorGlide skirt coating, which significantly reduces friction and prevents seizure under high thermal loads while providing quieter engine operation. The crowns are fully machined and feature an anti-detonation groove to protect the ring land by disrupting pressure waves. Forced pin oiling ensures constant lubrication at the wrist pin, extending the life of the rotating assembly during high-RPM use.

• Bore Size: 85.5mm
• Dish Volume: -10cc
• Compression Height: 1.378 in
• Material: 2618 Forged Aluminum
• Skirt Coating: ArmorGlide seizure-resistant finish
• Includes: Premium rings, wrist pins, and circlips
• Manufacturer Part Number: K560M855

Fits Mazda Miata (1.8L) engines.

These Supertech performance pistons are designed for high-strength engine builds and overbore applications for the Mazda 1.8L platform. Featuring an 84mm bore and a -4cc dish volume, these pistons yield an 8.6:1 compression ratio, providing a robust foundation for forced induction or high-performance naturally aspirated setups. Each piston is precision-engineered to meet the strict tolerances required for high-stress automotive environments.

• Bore Diameter: 84mm
• Compression Ratio: 8.6:1
• Dish Volume: -4cc
• Engine Compatibility: Mazda 1.8L
• Quantity: Set of 4 pistons
• Manufacturer Part Number: P4-MA84-N4
• Note: Piston rings are NOT included

Fits 2012+ Subaru FA20E and FA20F engines.

Engineered for high-demand Subaru performance builds, this JE Pistons forged piston set is machined from 2618 aluminum alloy to provide the high tensile strength required for forced induction and racing applications. The proprietary Forged Side Relief (FSR) design utilizes a reduced skirt width and shorter wrist pins to minimize friction and reciprocating weight without compromising structural integrity.

These pistons include an integrated accumulator groove to manage combustion gas pressure, effectively reducing ring flutter and improving the ring seal for more consistent power delivery. The skirts are treated with a specialized coating to reduce friction and wear on both the piston and cylinder walls while dampening operating noise. Each set comes complete with premium JE Pro Seal rings, high-quality wrist pins, and locks for a comprehensive internal upgrade.

• Bore: 86.25mm (+0.25mm Oversize)
• Stroke: 86mm
• Compression Ratio: 10.6:1
• Dish Volume: -10.0cc
• Material: 2618 Forged Aluminum
• Series: Forged Side Relief (FSR)
• Included: JE Pro Seal Piston Rings, wrist pins, and locks
• Manufacturer Part Number: 359189
• Origin: 100% Made in the USA

Fits select 2014-2024 Audi and Volkswagen models equipped with the 2.0L TSI engine.

This CP Pistons Piston & Ring Set is engineered for high-performance 2.0L TSI builds that require tighter tolerances and superior strength than factory components. Designed to handle increased cylinder pressures, these pistons provide a reliable foundation for tuned street or track vehicles.

• Bore Size: 83mm
• Compression Ratio: 9.5:1
• Engine Compatibility: 2.0L TSI
• Manufacturer Part Number: SC7637-4

Each kit comes as a complete set including precision-machined pistons, high-performance piston rings, wrist pins, and locks. This ensures a comprehensive solution for engine builders looking to maintain optimal ring seal and thermal stability under load.

Fits Honda H22 engines.

Engineered for high-performance builds, this CP Pistons Piston and Ring Set (SC7130-4) provides the strength and precision required for the Honda H22 powerplant. These forged pistons are designed to maintain tighter tolerances and handle increased thermal loads better than factory cast components, making them a critical upgrade for performance-oriented engine rebuilds.

This set features a standard 87.0mm bore and a 10.0:1 compression ratio, striking a balance between efficient power delivery and engine longevity. Each kit comes complete with a matched set of high-quality piston rings to ensure a superior combustion seal and consistent oil control under load.

• Manufacturer Part Number: SC7130-4
• Bore: 87.0mm (Standard)
• Compression Ratio: 10.0:1
• Engine Fitment: Honda H22
• Includes: Pistons and piston ring set

Fits 2002-2006 Acura RSX Base and Type-S models equipped with K24/K20 hybrid engine configurations (K24 block with K20A, K20A2, or K20A3 cylinder heads).

Engineered for high-performance K-Series builds, this CP Piston and Ring Set provides the structural integrity required for increased cylinder pressures. These pistons are specifically designed for "Frankenstein" K24/K20 engine setups, ensuring proper valve relief clearance and optimized geometry for the hybrid head and block combination. Each piston is precision-forged to tight tolerances, reducing thermal expansion and improving ring seal for consistent power delivery and long-term reliability under heavy load.

• Manufacturer Part Number: SC7045-4
• Bore: 87.00mm
• Size: Standard (STD)
• Compatibility: K24 block with K20A, K20A2, or K20A3 heads
• Includes high-performance piston rings, wrist pins, and locks
• Forged construction for superior strength-to-weight ratio

Fits 2004-2012 Subaru Impreza WRX STI, including Limited and Special Edition models (EJ257).

Engineered for high-output competition engines, the Wiseco Professional Series forged piston kit provides the durability required for serious EJ257 builds. These pistons are machined from 2618 aluminum alloy to provide superior tensile strength and resistance to detonation in high-boost applications. Each piston features Wiseco's proprietary ArmorGlide skirt coating to reduce friction, minimize noise, and prevent scuffing during extreme operating conditions.

• Bore Size: 99.75mm
• Volume: -19cc Dish (4v)
• Material: 2618 Forged Aluminum
• ArmorGlide Coating: Provides seizure resistance and quieter operation
• Forced Pin Oiling: Ensures consistent lubrication at the wrist pin for heavy-duty cycles
• Precision Features: Fully machined crowns and anti-detonation grooves for improved ring seal
• Manufacturer Part Number: K598M9975

This shelf-stock kit includes premium rings and is designed for builders who require high-performance tolerances and proven reliability in severe-duty racing environments.

Fits Subaru FA20 Direct Injection engines (2.0L).

Wiseco Professional Series forged pistons are engineered for high-output Subaru FA20 builds where reliability under extreme cylinder pressures is non-negotiable. Forged and machined in the USA from 2618 aluminum alloy, these pistons provide the increased tensile strength required for heavy-duty racing and forced induction applications.

Each piston features Wiseco’s proprietary ArmorGlide skirt coating to reduce friction, prevent seizure, and ensure quieter operation. The design incorporates forced pin oiling and precision-machined crowns to optimize lubrication and combustion. This kit includes premium rings and is purpose-built to withstand the rigors of severe-duty performance environments.

• Material: 2618 Forged Aluminum Alloy
• Dish Volume: -9.5cc
• Bore Size: 86.00mm
• ArmorGlide skirt coating for friction reduction and seizure resistance
• Forced pin oiling for enhanced wrist pin lubrication
• Anti-detonation grooves to protect the top ring land and improve seal
• Fully machined crown for optimized combustion characteristics
• Manufacturer Part Number: K727M86

Fits 1997-2002 Mitsubishi Lancer with 4G93 and 4G94 engines (1.8L).

Wiseco Professional Series forged pistons are engineered for high-performance builds and severe-duty racing applications. Forged and machined in the USA from 2618 aluminum, these pistons offer the superior tensile strength required to handle increased cylinder pressures and heat. Each piston features Wiseco’s ArmorGlide skirt coating, which reduces friction, minimizes noise, and provides excellent seizure resistance during initial break-in and extreme operation.

This kit includes precision-machined ring grooves and anti-detonation grooves to improve ring seal and protect the piston land under load. Forced pin oiling ensures the wrist pin receives constant lubrication, extending component life at high RPM. The set comes complete with premium rings to ensure a reliable seal for your build.

• Manufacturer Part Number: K683M82AP
• Material: 2618 Forged Aluminum
• Bore Size: 82.00mm (+.040")
• Compression Height: 1.190"
• Dome Volume: -2.5cc (Flat Top)
• Skirt Coating: ArmorGlide
• Engine Compatibility: 4G93 / 4G94 (1.8L)
• Includes: Professional Series pistons and premium ring set

Fits Toyota 2JZGTE (3.0L) engines.

Wiseco Professional Series forged racing pistons are engineered for high-horsepower engine builds and severe-duty racing applications. Forged and machined in the USA from 2618 aluminum alloy, these pistons provide the exceptional tensile strength required for forced-induction 2JZ platforms. This set features an asymmetric skirt design to optimize weight and reduce friction while maintaining structural integrity at high RPMs.

Every piston is treated with Wiseco's ArmorGlide skirt coating to provide seizure resistance and quieter operation. The fully machined crowns and anti-detonation grooves improve combustion efficiency and ring seal stability under heavy load.

• Bore Size: 86.5mm (+.5mm oversize)
• Compression Height: 33.98mm
• Material: Forged 2618 Aluminum
• ArmorGlide Skirt Coating: Reduces friction and wear
• Asymmetric Skirt: Optimized for weight and stability
• Forced Pin Oiling: Ensures consistent lubrication of the wrist pin
• Included Hardware: Premium piston rings and wrist pins
• Manufacturer Part Number: K678M865AP

Fits Toyota 2JZGTE engines (3.0L).

Wiseco Professional Series forged racing pistons are engineered for the extreme thermal and mechanical loads of high-horsepower 2JZGTE builds. Machined from high-strength 2618 aluminum alloy, these pistons provide the tensile strength required for high-boost and severe-duty racing applications. The asymmetric skirt design optimizes the piston profile to reduce reciprocating weight while maintaining a full-width skirt on the high-load thrust side for maximum stability.

This set features Wiseco’s proprietary ArmorGlide skirt coating, which reduces friction and operating noise while providing superior seizure resistance. Advanced machining includes forced pin oiling for improved lubrication and anti-detonation grooves to protect the ring land and enhance seal under high cylinder pressures.

• Manufacturer Part Number: K677M86AP
• Bore Size: 86mm (Standard)
• Material: 2618 Forged Aluminum
• Skirt Type: Asymmetric Skirt with ArmorGlide Coating
• Engine Application: Toyota 2JZGTE (3.0L)
• Included: Premium piston rings and wrist pins
• Key Features: Forced pin oiling and anti-detonation grooves

Fits Toyota 2JZGTE engines (3.0L).

Wiseco Professional Series forged racing pistons are engineered for high-output builds and severe-duty performance. Machined in the USA from 2618 aluminum alloy, these pistons provide the increased tensile strength and thermal resistance required for high-horsepower and forced-induction applications. The asymmetric skirt design reduces weight and friction while maintaining critical stability during the power stroke.

This set features Wiseco's ArmorGlide skirt coating to minimize friction, reduce seizure risk, and ensure quieter operation. Precision-machined crowns, anti-detonation grooves, and forced pin oiling systems come standard to ensure maximum ring seal and component longevity under extreme stress.

• Bore Diameter: 86.5mm (+.5mm oversize)
• Material: Forged 2618 aluminum alloy
• Skirt Type: Asymmetric skirt with ArmorGlide coating
• Key Features: Forced pin oiling and fully machined crowns
• Includes premium ring set and wrist pins
• Designed for heavy to severe duty race builds
• Manufacturer Part Number: K677M865AP

Fits Toyota 2JZGTE engines (3.0L).

Engineered for high-boost and high-RPM racing applications, the Wiseco Professional Series forged piston set provides the strength and precision required for severe-duty engine builds. These pistons are machined from 2618 aluminum alloy for superior tensile strength and resistance to detonation. This 86.25mm (+.25mm oversize) set utilizes an asymmetric skirt design, which reduces overall weight and friction while maintaining a wide skirt on the major thrust side for maximum stability.

• Manufacturer Part Number: K677M8625AP
• Material: Forged 2618 Aluminum
• Bore Size: 86.25mm (+.25mm Oversize)
• ArmorGlide Skirt Coating: Reduces friction, noise, and cylinder wall wear
• Asymmetric Skirt Profile: Optimizes weight and thrust-side strength
• Features precision-machined ring grooves and anti-detonation grooves for superior ring seal
• Forced pin oiling ensures reliable lubrication of the wrist pin under load
• Includes premium piston rings for a complete professional installation

Fits 1993-2001 Honda Civic Si (B16A engine).

Wiseco Professional Series forged racing pistons are engineered for the demands of high-output race builds and heavy-duty performance. Precision-machined in the USA from 2618 aluminum alloy, these pistons provide the increased tensile strength required for high-RPM and high-pressure environments. This 81.0mm standard-size kit incorporates ArmorGlide skirt coating to significantly reduce friction, minimize operating noise, and protect against seizure under extreme thermal loads.

Note: Installation of this kit requires the use of a .040" thickness head gasket.

• Forged from 2618 aluminum for maximum durability and strength
• ArmorGlide skirt coating reduces friction and improves cylinder wall life
• Precision-machined ring grooves and anti-detonation grooves for superior ring seal
• Forced pin oiling ensures consistent lubrication to the wrist pin
• Fully machined crown features for optimized combustion
• Includes premium piston rings and wrist pins
• Manufacturer Part Number: K673M81AP

Wiseco Professional Series forged pistons are engineered for high-output race builds where durability and thermal stability are paramount. Precision-machined in the USA from high-tensile 2618 aluminum alloy, these pistons are designed to withstand the rigors of heavy to severe duty performance applications. This kit features Wiseco's proprietary ArmorGlide skirt coating to reduce friction, minimize cylinder wear, and ensure quieter operation. Note: This specific shelf stock kit is designed for use with a .040-inch head gasket.

• Forged from high-strength 2618 aluminum alloy for improved tensile strength
• 81.5mm bore and 1.181-inch compression height
• ArmorGlide skirt coating reduces friction and improves seizure resistance
• Precision-machined ring grooves with anti-detonation features for improved ring seal
• Forced pin oiling for enhanced wrist pin lubrication at high RPM
• Includes premium piston rings and high-quality wrist pins
• Manufacturer Part Number: K673M815AP

Engineered for high-performance Mitsubishi "Frankenstein" engine builds, this Wiseco Professional Series Piston Kit is designed specifically for 4G64 blocks utilizing 4G63 cylinder heads. These forged pistons are built for heavy to severe duty racing applications, offering the durability required for high-compression E85 setups.

Each piston is machined in the USA from 2618 forged aluminum alloy for superior tensile strength under extreme thermal and mechanical loads. The set features ArmorGlide skirt coating to reduce friction, minimize noise, and provide seizure resistance. Integrated forced pin oiling and anti-detonation grooves ensure reliable performance and ring seal longevity in demanding race environments.

• Application: Mitsubishi 4G64 block with 4G63 cylinder head
• Compression Ratio: 10.5:1
• Material: 2618 Forged Aluminum
• Finish: ArmorGlide Skirt Coating
• Technical Features: Precision ring grooves, anti-detonation grooves, and forced pin oiling
• Includes: Piston set and premium piston rings
• Manufacturer Part Number: K656M85AP

Designed for high-output Mitsubishi 4G64 blocks utilizing 4G63 cylinder heads, this Wiseco Professional Series piston kit is engineered for the rigors of heavy-duty racing. These forged pistons feature a 10.5:1 compression ratio specifically optimized for E85 fuel, providing the structural integrity needed for high-cylinder-pressure environments.

Each piston is machined in the USA from 2618 aluminum alloy for superior tensile strength compared to standard alloys. The skirts are treated with Wiseco's proprietary ArmorGlide coating to reduce friction, minimize wear, and ensure quieter operation. The kit includes precision-machined ring grooves and forced pin oiling to maintain lubrication under extreme loads.

• Application: Mitsubishi 4G64 block with 4G63 cylinder head (Hybrid/Frankenstein builds)
• Material: Forged 2618 Aluminum Alloy
• Compression Ratio: 10.5:1 (Optimized for E85)
• ArmorGlide skirt coating for reduced friction and seizure resistance
• Forced pin oiling and anti-detonation grooves for improved durability
• Includes premium rings and high-strength wrist pins
• Manufacturer Part Number: K656M855AP

Fits 2010-2013 Hyundai Genesis Coupe (2.0T).

Wiseco Professional Series forged racing pistons are engineered for high-output 4B11-T builds that demand extreme durability. Machined from high-tensile 2618 aluminum alloy, these pistons feature a spherical dish design to optimize combustion efficiency under heavy boost. Each piston is treated with Wiseco's proprietary ArmorGlide skirt coating to reduce friction, minimize cylinder wear, and ensure quieter operation during cold starts.

Built to handle severe-duty racing environments, this shelf-stock kit includes premium rings and features forced pin oiling to maintain lubrication at high RPMs. Precision-machined ring grooves and integrated anti-detonation grooves improve ring seal and protect the lands from pressure spikes, making these a critical upgrade for any serious Hyundai 2.0T build.

• Forged from 2618 aluminum for superior strength and heat resistance
• ArmorGlide skirt coating for reduced friction and seizure resistance
• Forced pin oiling for enhanced wrist pin lubrication
• Precision-machined crown and anti-detonation grooves
• Includes premium piston rings
• Manufacturer Part Number: K651M865

Fits 2010-2013 Hyundai Genesis Coupe (2.0T).

Wiseco Professional Series forged racing pistons are engineered for high-performance builds requiring exceptional durability and thermal stability. CNC-machined in the USA from 2618 aluminum alloy, these pistons provide the high tensile strength necessary to handle increased cylinder pressures in forced induction 4B11-T engines. Each piston in this shelf stock kit features a spherical dish crown designed to optimize combustion efficiency.

• Forged from 2618 aluminum alloy for superior strength-to-weight ratio
• ArmorGlide skirt coating for reduced friction, quieter operation, and scuff resistance
• Forced pin oiling and anti-detonation grooves for improved reliability under load
• Precision-machined ring grooves for enhanced ring seal
• Includes premium piston rings and high-quality wrist pins
• Manufacturer Part Number: K651M86

Designed for high-output Honda K-Series builds, the Wiseco Professional Series forged piston kit (K650M88AP) is engineered for serious racers and professional engine builders. These pistons are forged and machined in the USA from high-tensile 2618 aluminum alloy, specifically selected to withstand the extreme cylinder pressures and heat of heavy to severe-duty racing applications.

Each piston features Wiseco's proprietary ArmorGlide skirt coating to reduce friction and prevent seizure, alongside forced pin oiling for improved lubrication at high RPMs. The +10.5cc dome design is paired with fully machined crowns and precision-cut ring grooves to ensure a superior seal and maximum durability under load.

• Fits Honda K-Series engines
• Forged from 2618 aluminum for maximum tensile strength
• Bore: 88.0mm | Compression Height: 1.181in | Dome Volume: +10.5cc
• ArmorGlide skirt coating for reduced friction and quieter operation
• Anti-detonation and precision ring grooves for optimized ring seal
• Forced pin oiling and fully machined crowns
• Includes premium piston rings and hardware
• Manufacturer Part Number: K650M88AP

Engineered for high-output Honda K-Series race builds, these Wiseco Professional Series forged pistons are designed for builders who demand maximum thermal stability and tensile strength. Machined in the USA from premium 2618 aluminum alloy, this shelf stock kit is purpose-built to withstand the extreme cylinder pressures of heavy to severe-duty performance applications.

Each piston features Wiseco’s proprietary ArmorGlide skirt coating, which reduces friction and provides superior seizure resistance for quieter, more reliable operation. The fully machined crowns incorporate anti-detonation grooves to protect the ring land while forced pin oiling ensures the wrist pins remain lubricated under high-load conditions.

• Engine Fitment: Honda K-Series
• Material: Forged 2618 Aluminum Alloy
• Bore Diameter: 86.5mm
• Compression Height: 1.181"
• Dome Volume: +10.5cc
• Skirt Coating: ArmorGlide
• Hardware Included: Premium rings and wrist pins
• Manufacturer Part Number: K650M865AP