Fits 2016-2019 Nissan TITAN XD (V8-5.0L). This aFe POWER SCORCHER HD performance module is designed to optimize your diesel engine's output by safely increasing turbo boost and fuel pressure. Dyno-tested to produce gains of up to +60 horsepower and +100 lbs. x ft. of torque, this module significantly improves throttle response and towing performance without leaving a footprint on the factory ECU.

The system features a high-quality case and a dedicated wire harness equipped with factory-style connectors for a true plug-and-play installation that typically takes less than 30 minutes. An included in-cabin LED light switch allows for on-the-fly power adjustments between four distinct settings: Stock (Green), Sport (Yellow), Sport+ (Orange), and Race (Red).

• Performance: Verified gains of up to +60 HP and +100 lbs. x ft. torque
• Adjustability: 4-power settings adjustable via in-cabin LED switch
• Installation: Simple 30-minute plug-and-play setup using factory mounting locations
• Reliability: 100% of units are tested for high reliability
• Stealth: Leaves no trace on the ECU (no footprint)
• Compatibility: Works with other aFe POWER performance upgrades
• MPN: 77-46101

Fits select 2024-2026 Toyota Tacoma, Land Cruiser, and 2025-2026 4Runner models equipped with the L4-2.4L turbo engine.

The aFe POWER SCORCHER GT Power Module delivers a quick and effective boost in performance by altering pressure sensor signals to increase turbo boost. This results in significant improvements in throttle response and overall vehicle efficiency. Designed for enthusiasts who want adjustable power without permanent modifications, this module leaves no footprint on the factory ECU after removal.

The system features an in-cabin LED light switch, allowing for on-the-fly power adjustments across four distinct settings: Stock (Green), Sport (Yellow), Sport+ (Orange), and Race (Red). Built for durability, the module is housed in a black powder-coated aluminum extrusion enclosure and utilizes high-quality, factory-style connectors that plug directly into the OEM wiring harness for a secure, weather-tight fit.

• Manufacturer Part Number: 77-46015
• Power Settings: 4 adjustable modes (Stock, Sport, Sport+, Race)
• Control: In-cabin on-the-fly adjustment via LED button switch
• Construction: Black powder-coated extruded aluminum housing
• Installation: Plug-and-play setup, typically completed in 30 minutes
• Reliability: 100% tested for proper protection and performance
• ECU Safety: No trace or footprint left on the factory controller

Fits 2016-2023 Toyota Tacoma models equipped with the V6-3.5L engine.

The aFe POWER SCORCHER GT Power Module provides a fast and effective way to increase horsepower, torque, and throttle response by optimizing the Mass Air Flow (MAF) sensor signal. This plug-and-play unit is designed for the enthusiast who wants a performance boost without permanent modifications or complex tuning. The module is housed in a durable, black powder-coated aluminum extrusion enclosure and features an integrated ON/OFF button with a blue LED indicator to confirm the unit is powered and functioning.

Engineered for high reliability, 100% of these modules are tested for proper operation. The installation is straightforward, typically taking between 10 to 30 minutes, and utilizes factory-style connectors that plug directly into your stock wiring harness. Because it does not modify the ECU, it leaves no footprint, allowing the vehicle to be returned to stock configuration easily.

• Performance Optimization: Alters MAF signal to improve engine efficiency and throttle response.
• Plug & Play: Uses OEM-style connectors for a secure fit with no cutting or splicing required.
• No ECU Footprint: Leaves no trace on the factory computer once removed.
• Durable Construction: Black powder-coated aluminum housing for superior protection and heat dissipation.
• System Compatibility: Optimized for use with aFe POWER intake systems including the Takeda Momentum, Momentum GT, and Super Stock series.
• MPN: 77-46008

Vehicle Fitment:

• 2016-2023 Toyota Tacoma Limited
• 2016-2023 Toyota Tacoma SR
• 2016-2023 Toyota Tacoma SR5
• 2021 Toyota Tacoma Trail
• 2023 Toyota Tacoma Trail Special Edition
• 2016-2023 Toyota Tacoma TRD Off-Road
• 2017-2023 Toyota Tacoma TRD Pro
• 2016-2023 Toyota Tacoma TRD Sport

Fits 2022-2026 Ford Bronco Raptor, Explorer (ST/Platinum), Ranger Raptor, and Lincoln Aviator (V6-3.0L).

The aFe POWER SCORCHER GT Module (77-43050) provides a significant increase in power and throttle response for your twin-turbocharged 3.0L engine. This performance module works by altering pressure sensor signals to increase turbo boost, optimizing engine efficiency without modifying the factory ECU. The unit is housed in a durable black powder-coated aluminum extrusion casing and uses OEM-style connectors for a secure, factory-grade fitment that leaves no electronic footprint behind.

Fine-tune your driving experience with the included in-cabin LED light switch. This controller allows for on-the-fly power adjustments across four distinct settings: Stock (Green), Sport (Yellow), Sport+ (Orange), and Race (Red). Installation is straightforward and typically takes less than 30 minutes with no wire cutting or splicing required.

• Four adjustable power settings: Stock, Sport, Sport+, and Race
• Increases turbo boost for improved horsepower, torque, and throttle response
• Quick and easy plug-and-play installation (approx. 30 minutes)
• In-cabin on-the-fly adjustments via a compact LED controller
• High-quality aluminum extrusion enclosure with black powder-coated finish
• OEM-style connectors ensure a secure fit with no vehicle modifications
• Leaves no trace/footprint on the factory ECU for maximum reliability
• 100% of units are tested for proper operation and protection
• Manufacturer Part Number: 77-43050

Fits 2019-2025 Ford Ranger and 2021-2025 Ford Bronco (L4-2.3L EcoBoost).

Unlock significant performance gains with the aFe POWER Scorcher GT Power Module. This plug-and-play performance upgrade works by altering pressure sensor signals to increase turbo boost, resulting in improved throttle response and increased efficiency throughout the RPM range. The module is housed in a durable, black powder-coated aluminum extrusion casing designed to withstand engine bay heat and vibration.

Installation is straightforward and typically takes about 30 minutes, utilizing high-quality wire harnesses with factory-style connectors that plug directly into your stock sensors without requiring any modifications to the vehicle's wiring. An included in-cabin LED light switch allows for on-the-fly power adjustments with four distinct settings: Stock (Green), Sport (Yellow), Sport+ (Orange), and Race (Red). This module is designed to leave no trace on the factory ECU, ensuring no footprint is left behind.

• Four adjustable power settings for various driving conditions
• Durable black powder-coated aluminum extrusion enclosure
• OE-style connectors for a secure, plug-and-play fit
• Included in-cabin switch for real-time power level changes
• Engineered to improve turbo boost and throttle sensitivity
• 100% tested for reliability and safety
• Manufacturer Part Number: 77-43046

Fits select 2021-2026 Ford Bronco, Expedition, F-150, and Lincoln Navigator (2.7L / 3.5L).

The aFe POWER Scorcher GT Power Module provides a significant increase in horsepower and torque by optimizing turbo boost pressure. This plug-and-play system alters pressure sensor signals to improve throttle response and vehicle efficiency without requiring modifications to the factory wiring harness. The module is housed in a durable black powder-coated aluminum extrusion enclosure and utilizes factory-style connectors for a secure installation that leaves no footprint on the ECU after removal.

Included with the module is an in-cabin LED light switch that allows for on-the-fly power adjustments between four distinct settings: Stock (Green), Sport (Yellow), Sport+ (Orange), and Race (Red). Each unit is 100% tested for reliability and is optimized to work with both stock vehicles and those equipped with other aFe POWER performance upgrades.

• Performance Gains: Up to +56 HP and +62 lbs. x ft. torque in Race Mode (tested on 3.5L tt engine)
• 4 Power Settings: Stock, Sport, Sport+, and Race modes
• Construction: Black powder-coated aluminum extrusion housing
• Installation: Easy plug-and-play setup with factory-style connectors (~30 minutes)
• Control: In-cabin on-the-fly adjustment via a surface-mounted LED switch
• Reliability: 100% of units are tested for proper operation
• Manufacturer Part Number: 77-43044

Fits select 2002-2003 Ford F-250 and F-350 Super Duty trucks equipped with the 7.3L Power Stroke diesel engine and automatic transmission.

The aFe Power Scorcher HD Performance Chip (MPN 77-43037) delivers significant power gains by increasing turbo boost and optimizing fuel injection timing and pulse width. Unlike flash tuners that overwrite the factory ECM, this module intercepts and alters signals in real-time. The system includes an in-cabin 4-position adjustment knob, allowing you to switch power levels on-the-fly to suit towing, hauling, or performance driving. This chip also enhances transmission shift points and firmness for improved drivability under load.

• Maximum gains: +133 HP and +224 lbs. x ft. Torque
• Four power settings: Stock, +50 HP, +75 HP, +100 HP, and HOT (+133 HP)
• Direct ECM port installation with no wiring modifications required
• Designed for ECM code DPC-462
• Compatible with box codes: BXE, KEK, NWM, PBY, PRW, TMA, VDH, VDU, and QLI
• Manufacturer Part Number: 77-43037

Fits 1995-1997 Ford F-250, F-250 HD, and F-350 trucks equipped with the V8-7.3L Power Stroke diesel engine and automatic transmission.

The aFe Power Scorcher HD Performance Chip provides a significant increase in power and torque by optimizing turbo boost pressure, fuel injection timing, and pulse width. Unlike handheld programmers that flash the ECM, this chip interfaces directly with the ECM port to alter signals in real-time. This method ensures reliable performance gains of up to +133 horsepower and +224 lbs. x ft. of torque while also enhancing transmission shift points and firmness for better drivability.

Installation is straightforward and requires no cutting or splicing of the factory wiring harness. After removing the vehicle's ECM and cleaning the port connections, the chip slides directly into the ECM. An included 4-position selector knob allows for on-the-fly adjustability from the cabin, enabling you to switch between four distinct power levels to suit your towing or performance needs.

• Performance Gains: Up to +133 HP and +224 lbs. x ft. Torque
• Adjustability: 4-position knob (+50 HP, +75 HP, +100 HP, and "HOT" up to +140 HP)
• Optimization: Increases turbo boost and refines fuel injection parameters
• Transmission: Improves shift firmness and logic for automatic applications
• Compatibility: Specifically for ECM DPC-202 (Box codes: LKM, MIF, NAW, PRE, PRY, TDE, TEE, YBT, ZAA)
• MPN: 77-43030

Fits 2025 Ram 2500 and 3500 trucks equipped with the L6-6.7L diesel engine.

The aFe POWER SCORCHER HD Power Module is a performance-driven solution designed to optimize turbo boost and fuel pressure for immediate gains in throttle response and efficiency. This module works by safely altering pressure sensor signals to the ECU, providing a significant increase in power without leaving a permanent footprint on the factory computer. Built for the rigors of heavy-duty use, the unit features a high-quality enclosure and a dedicated wire harness that utilizes factory-style connectors for a true plug-and-play installation that typically takes less than 30 minutes.

Drivers can manage performance from the driver's seat using the included in-cabin LED light switch. This controller allows for on-the-fly adjustments across four distinct power levels: Stock (Green), Sport (Yellow), Sport+ (Orange), and Race (Red). Each module is 100% tested for reliability and is fully compatible with other aFe POWER upgrades like cold air intakes and exhaust systems.

• Increases turbo boost and fuel pressure for improved torque and horsepower
• Four-position on-the-fly adjustment: Stock, Sport, Sport+, and Race
• Direct plug-and-play installation using factory-style connectors
• In-cabin LED control switch for easy mode selection
• No ECU footprint left after removal
• High-quality wire harness and durable housing
• Manufacturer Part Number: 77-42018

Fits select 2019-2024 Ram 2500 and 3500 trucks (L6-6.7L).

The aFe POWER Scorcher HD Module provides a significant boost in performance by altering pressure sensor signals to optimize turbo boost and fuel pressure. Designed for light to medium everyday use and occasional towing, this module connects directly to the Manifold Absolute Pressure (MAP) sensor and the Common Rail. The result is improved throttle response and vehicle efficiency without modifying the factory ECU, leaving no footprint behind for a completely reversible installation.

Built for durability and ease of use, the module is housed in a black powder-coated aluminum extrusion casing. It features a plug-and-play wire harness with factory-style connectors, allowing for a 30-minute installation with no cutting or splicing required. An included LED light switch enables in-cabin, on-the-fly power adjustments across four distinct settings.

• Stock (Green): Reverts to factory settings.
• Sport (Yellow): Balanced increase for daily driving.
• Sport+ (Orange): Enhanced response for aggressive street use.
• Race (Red): Maximum power delivery and performance.
• Construction: High-quality aluminum extrusion enclosure with a durable black finish.
• Installation: Direct plug-and-play connection to MAP and Common Rail sensors; no ECU footprint.
• Adjustability: LED in-cabin switch for immediate mode changes.
• Manufacturer Part Number: 77-42017

Fits select 2019-2025 Ram 2500, 3500, and 2021-2024 Jeep Grand Cherokee, Grand Cherokee L, and Grand Wagoneer (V8-6.4L).

The aFe POWER SCORCHER GT Power Module is a performance-driven solution designed to optimize throttle response and vehicle efficiency without the need for a permanent ECU reflash. By altering the Manifold Air Pressure (MAP) and Intake Air Temperature (IAT) sensor signals, this module provides a tangible increase in power across the RPM range. Because it works as a bypass, it leaves no footprint on the factory ECU once removed, making it an ideal choice for owners prioritizing reversibility.

Built for the long haul, the module features a durable, black powder-coated aluminum extrusion enclosure. The included wire harness utilizes factory-style connectors for a true plug-and-play installation that requires no cutting or splicing of your OE harness. The casing is equipped with an integrated ON/OFF button and a blue LED status indicator to confirm when the module is active and functioning.

• Manufacturer Part Number: 77-42016
• Module Type: Plug-and-play signal modifier (MAP and IAT)
• Enclosure: Black powder-coated aluminum extrusion
• Connectors: OEM-style for tool-free installation
• Installation Time: Approximately 30 minutes
• Control: Physical ON/OFF button with LED power indicator
• Compatibility: Works with stock vehicles or aFe POWER performance upgrades

Fits 2011-2023 Dodge Challenger, Dodge Charger, and Chrysler 300 (V8-5.7L).

The aFe POWER SCORCHER GT Power Module offers a significant increase in power and throttle response through a simple, reversible installation. By altering Manifold Air Pressure (MAP) and Intake Air Temperature (IAT) sensor signals, this module optimizes engine efficiency and performance. The system is completely plug-and-play, utilizing factory-style connectors that plug directly into your stock wiring harness without any cutting or splicing required.

Built for durability, the SCORCHER GT features a high-quality black powder-coated aluminum extrusion housing. The case is equipped with a manual ON/OFF button and a blue LED indicator, allowing you to control the module and verify its status at a glance. Because the module does not modify the factory ECU, it leaves no footprint once removed, making it a reliable solution for performance enthusiasts.

• Quick 30-minute plug-and-play installation
• Alters MAP and IAT signals to improve vehicle efficiency and throttle response
• High-quality extruded aluminum housing with black powder-coated finish
• Direct-fit OEM-style connectors for a secure, weather-tight connection
• Integrated ON/OFF button with blue LED status light
• Leaves no trace on the factory ECU (No Footprint)
• 100% tested for reliability and protection

• Manufacturer Part Number: 77-42015
• Housing Material: Aluminum
• Finish: Black Powder Coat
• Installation Type: Plug-and-Play
• Compatibility: Optimized for use with aFe POWER performance products

Fits select 2011-2026 Dodge Durango, Jeep Grand Cherokee, Grand Wagoneer, Wrangler, and Ram 1500/1500 Classic (V8-5.7L).

The aFe POWER Scorcher GT Module provides a significant increase in power and throttle response by safely altering Manifold Air Pressure (MAP) and Intake Air Temperature (IAT) sensor signals. This plug-and-play performance upgrade connects directly to your factory wiring harness without requiring any modifications or permanent changes to your vehicle's ECU. Because it does not flash the computer, it leaves no trace or "footprint" on the factory system.

This module features a rugged, black powder-coated aluminum extrusion casing for maximum durability and heat dissipation. The unit is equipped with a built-in ON/OFF button and a blue LED indicator light to show when the module is powered up and active. Every unit is 100% tested for reliability and is optimized for use with additional aFe POWER performance components.

• Increases power and improves throttle response by optimizing MAP and IAT signals
• Quick 30-minute installation with factory-style plug-and-play connectors
• High-quality black powder-coated aluminum enclosure
• Integrated ON/OFF button with blue LED power indicator
• Leaves no footprint on the factory ECU
• Manufacturer Part Number: 77-42014

Fits 2011-2026 Chrysler 300, Dodge Challenger, Dodge Charger, and Ram 1500 (V6-3.6L).

The aFe POWER SCORCHER GT Module is a plug-and-play performance upgrade designed to significantly improve throttle response and power delivery. By altering pressure signals to the ECU, this module optimizes performance across the RPM range without leaving a permanent footprint on your vehicle's computer. The system features a high-quality housing and a complete wire harness utilizing factory-style connectors to ensure a secure, weather-tight installation that maintains OE-level integrity.

A standout feature is the included in-cabin LED light switch, allowing for on-the-fly power adjustments from the driver's seat. You can cycle through four distinct presets: Stock (Green), Sport (Yellow), Sport+ (Orange), and Race (Red), tailoring the vehicle's behavior to your current driving needs. Every unit is 100% tested for reliability to ensure consistent performance in all conditions.

• Manufacturer Part Number: 77-42011
• Four power settings: Stock, Sport, Sport+, and Race
• On-the-fly in-cabin adjustments via LED light switch
• Easy 30-minute plug-and-play installation
• Factory-style connectors for a precise, secure fit
• No footprint left on the ECU for a stealthy installation
• High-quality case and wire harness for long-term reliability

Eliminate throttle lag and regain control over your vehicle's drivability with the aFe POWER Pedal 2 Metal Throttle Enhancer. This plug-and-play module intercepts the signal between your accelerator pedal and the ECU, allowing you to customize throttle response to suit your driving conditions—whether you are towing, commuting, or at the track. The compact design is engineered for a stealthy installation, mounting discreetly under the kick panel using factory-style connectors without the need for bulky wiring or external switch panels.

Fits select 2006-2026 Subaru (Forester, Impreza, WRX/STI, Legacy, Outback, Ascent, Crosstrek), Scion FR-S, and Toyota 86 models equipped with the H4-2.5L engine.

Using the Pedal 2 Metal smartphone app via Bluetooth, you can toggle between five distinct acceleration modes and fine-tune specific throttle curves. For added security, the module includes a Valet Mode to limit acceleration and a Pedal Lock Mode that completely disables the throttle to prevent unauthorized use.

• Instant throttle response improvement and smoother transmission shift feel
• Bluetooth connectivity compatible with iOS and Android devices
• 5 adjustable driving modes with custom sensitivity tuning
• Valet Mode and Pedal Lock for enhanced vehicle security
• Simple plug-and-play installation using OE-style connectors
• Compact, stealthy module housing avoids cluttered dashboards
• Manufacturer Part Number: 77-20017

Fits select 2006-2026 Nissan, Infiniti, and Mitsubishi vehicles. The aFe Power Pedal 2 Metal Throttle Enhancer eliminates the inherent lag of modern electronic throttle systems, providing instantaneous pedal response and improved drivability. This compact module features a stealthy design intended for installation under the kick panel, utilizing factory-style connectors for a complete plug-and-play setup without cutting or splicing wires.

Using the Pedal 2 Metal smartphone app (available for iOS and Android), you can fine-tune your driving experience via Bluetooth. The system offers five distinct acceleration modes with adjustable sensitivity, allowing you to customize the throttle curve for city driving, towing, or performance applications. Security features include a Valet Mode to limit performance and a Pedal Lock Mode that prevents throttle operation for unauthorized users.

• Manufacturer Part Number: 77-20015
• Plug-and-play installation using factory connectors
• Bluetooth-enabled control via smartphone app
• 5 adjustable driving modes for custom sensitivity
• Integrated Valet Mode and Pedal Lock security functions
• Compact module housing for discreet mounting
• Improves transmission shift feel and throttle response

Eliminate throttle lag and regain control over your driving experience with the aFe POWER Pedal 2 Metal Throttle Enhancer. Designed for modern drive-by-wire systems, this module intercepts and remaps electronic signals sent to the ECM, providing immediate, intuitive acceleration. Whether you are navigating uphill starts, overtaking with a heavy load, or seeking sharper response on the track, the Pedal 2 Metal delivers tunable performance via your smartphone.

Installation is a straightforward five-minute process using OE-style factory connectors behind the accelerator pedal. This plug-and-play design requires no wire cutting or permanent vehicle modifications. The compact module fits discreetly under the kick panel, utilizing the latest Bluetooth technology to eliminate the need for bulky physical switches or dash-mounted controllers.

• Fits select 2013-2026 Honda and Acura models including Accord, Civic, CR-V, Pilot, MDX, and TLX.
• Five Acceleration Modes: Stock, Economy, Street, Performance, and Race.
• Bluetooth-enabled app control for iOS and Android devices.
• Built-in Valet and Lockout functions for enhanced vehicle security.
• Sleek, compact design for stealthy, unobtrusive installation.
• Directly replaces sluggish factory response with adjustable sensitivity.
• Manufacturer Part Number: 77-20013.

Fits select 2011-2026 Lexus, Toyota, Subaru, and Scion models.

The aFe POWER Pedal 2 Metal Throttle Enhancer (77-20012) is engineered to eliminate the inherent lag found in modern drive-by-wire systems. By remapping the electronic signal sent to the ECM (Electronic Control Module), this module provides instant, intuitive throttle response that you can customize directly from your smartphone via Bluetooth. It is an ideal solution for improving drivability during uphill starts, overtaking with a heavy load, or seeking quicker gear shifts.

• Bluetooth App Control: Managed via a dedicated smartphone interface for iOS and Android, eliminating the need to mount physical switches or drill into your dashboard.
• Five Driving Modes: Features Stock, Economy, Street, Performance, and Race modes with adjustable sensitivity settings to match any road condition or driving style.
• Plug-and-Play Installation: Utilizes factory-style OE connectors to plug directly into the harness behind your accelerator pedal. Installation typically takes less than five minutes with no wire cutting required.
• Security Functions: Includes integrated Valet and Lockout modes to restrict throttle input for added vehicle security.
• Stealth Mounting: The compact module is designed for a discreet install under the kick panel, maintaining a clean factory look.

Fits select 2000-2026 BMW 1/2/3/4/5/6/7/8 Series, X3/X4/X5/X6, Z3/Z4, and Mini Cooper/Clubman/Countryman models.

Eliminate the sluggish throttle response inherent in modern drive-by-wire systems with the aFe POWER Pedal 2 Metal Throttle Enhancer. This module intercepts and remaps the electronic signals sent to the ECM (Electronic Control Module), delivering immediate, intuitive acceleration. Whether you are managing uphill starts, overtaking under load, or seeking crisper gear shifts, the Pedal 2 Metal provides the adjustability needed to match your driving environment.

The system utilizes an integrated Bluetooth module, allowing you to fine-tune response directly from your smartphone via a dedicated iOS and Android app. This eliminates the need to mount a physical switch on your dashboard, maintaining a clean, factory interior. Installation is a straightforward plug-and-play process, using OE-style connectors that plug directly into the factory accelerator pedal harness in minutes without any wire cutting or permanent modifications.

• Manufacturer Part Number: 77-20007
• Adjustability: 5 driving modes with multiple sensitivity settings
• Connectivity: Bluetooth-enabled for wireless app control (No dash-mounted switch required)
• Security: Includes Valet and Lockout modes for added protection
• Installation: Direct-fit factory connectors; 5-minute estimated install time
• Design: Compact, stealthy module fits discreetly under the kick panel