Fits select 2015-2024 Ford Mustang models, including EcoBoost, GT, Shelby GT350/GT500, Mach 1, and Dark Horse.

BMR Caster Camber Plates (CP001R) provide the essential alignment adjustability required for lowered S550 and S650 Mustangs. These plates replace the factory upper strut mounts with heavy-duty, CNC laser-cut steel plates, offering a total camber range of 1.75 degrees. This additional range allows for precise correction of front-end geometry to prevent uneven tire wear and optimize handling for street or track applications.

This 100% bolt-on kit is compatible with factory-style struts as well as Viking Performance and Strange Engineering S550 coilovers and S197-conversion coilovers. The included spacers are specifically designed to accommodate larger 16mm coilover strut shafts, ensuring a wide range of suspension compatibility. Finished in a durable red powder coat, these plates are built to withstand heavy use while maintaining a clean look.

• Manufactured from high-strength CNC laser-cut steel plate
• Provides 1.75 degrees of total camber adjustability
• Compatible with factory-style struts and specific aftermarket coilovers
• Includes specialized spacers for 16mm coilover strut shafts
• 100% bolt-on design replaces factory upper strut mounts
• Durable red powder coat finish
• Approximate 2-hour installation time
• Designed and manufactured in the USA
• Manufacturer Part Number: CP001R

Fits select 2015-2024 Ford Mustang models (V6, EcoBoost, GT, Shelby GT350/GT350R/GT500, Mach 1, Bullitt, and Dark Horse).

Correct your alignment and restore handling performance on lowered S550 and S650 platforms with BMR Caster Camber Plates. These plates replace the factory rubber-isolated upper strut mounts, providing a total camber range of 1.75 degrees while adding much-needed caster adjustability. Engineered for both street and track use, the CNC laser-cut steel construction ensures maximum rigidity under heavy cornering loads.

• Manufactured from heavy-duty CNC laser-cut steel plate
• Provides a total camber range of 1.75 degrees for precise alignment
• Adds caster adjustability to improve high-speed stability and steering feel
• Includes spacers for larger 16mm coilover strut shafts
• 100% bolt-on design for a straightforward 2-hour installation
• Compatible with stock-style struts, Viking Performance, and Strange Engineering S550/S197 coilovers
• Finished in a durable Black Hammertone powder coat
• Designed and manufactured in the USA
• Manufacturer Part Number: CP001H

Fits 1997-2003 Ford F-150 (Base, Harley-Davidson Edition, King Ranch, Lariat, Lightning, XL, and XLT).

The Belltech 6656 shock extension kit is engineered to relocate the lower shock mounting point on aggressively lowered 1997-2003 Ford F-150 trucks. By repositioning the mount, this kit corrects the shock absorber's working angle and restores necessary travel, preventing the dampeners from bottoming out and ensuring they operate within their effective range.

Each extension is manufactured from stamped heavy-gauge P&O (Pickled and Oiled) steel for maximum structural integrity and finished with a durable powder coating to resist corrosion and road debris. This kit includes all necessary Grade 8 hardware and detailed instructions for a straightforward installation.

• Corrects shock absorber working angle on lowered suspension setups
• Increases overall shock travel to prevent bottoming out
• Constructed from heavy-gauge stamped P&O steel for durability
• Resilient powder-coated finish protects against corrosion
• Includes high-strength Grade 8 hardware
• Manufacturer Part Number: 6656

Fits select 1988-2000 Chevrolet and GMC C1500, C2500, C3500, Suburban, Tahoe, and Yukon models.

Belltech shock extensions are engineered to relocate the lower shock mounting point, a critical modification for aggressively lowered trucks and SUVs. By repositioning the mount, this kit corrects the shock absorber's working angle and restores necessary suspension travel that is often compromised during the lowering process. This ensures the dampers operate within their intended range for better ride quality and component longevity.

Constructed from stamped heavy-gauge P&O (Pickled and Oiled) steel, these extensions are built to withstand high stress. Each component is finished with a durable powder coating for maximum corrosion resistance against road debris and moisture.

• Corrects shock working angle on lowered suspension setups
• Increases overall shock travel to prevent bottoming out
• Manufactured from heavy-gauge stamped P&O steel
• Durable powder-coated finish for long-term protection
• Includes high-strength Grade 8 hardware
• Manufacturer Part Number: 6652

Included in the Box: (2) Shock extension brackets, Grade 8 installation hardware, and instructions.

The ARB TRED Quick Release Mounting Kit (TQRMK) provides a secure, efficient solution for mounting recovery boards to your vehicle or trailer. Engineered for rapid deployment, this kit combines a heavy-duty TRED Mounting Baseplate with TRED Quick Release Pins featuring a user-friendly ratchet handle design. This configuration allows you to quickly release or secure your gear, even in harsh off-road conditions.

This mounting system is versatile enough to hold up to four TRED GT, HD, or PRO model recovery boards simultaneously. For added peace of mind, the pins are lockable with a standard padlock to prevent theft. The kit includes stainless steel hardware for a corrosion-resistant installation and flush slot covers to maintain a clean appearance when pins are not in use.

• Compatible with TRED GT, HD, and PRO model recovery boards
• Mounts up to four recovery boards at once
• Quick-release ratchet handle design for fast board deployment
• Stainless steel hardware included for securing pins to the baseplate
• Lockable design (TRED recommends a 30mm padlock with a 5mm shackle)
• Recessed plate mount securing holes and flush slot covers
• Manufacturer Part Number: TQRMK

The ARB TRED Threaded Mounting Pins (T2SP115) provide a secure, versatile solution for mounting recovery boards to your vehicle rack or trailer. These 115mm (4.5in) pins are engineered with an M6 threaded base to facilitate easy installation across a variety of flat surfaces and brackets. The unique design allows for the stacking and locking of up to four TRED GT, HD, or PRO model recovery boards.

• Mounting Capacity: Secures up to four TRED GT, HD, or PRO recovery boards
• Adjustable Height: Securing range of 18mm to 73mm (0.7in to 2.87in) while maintaining locking functionality
• Threaded Base: M6 threaded design for universal surface mounting
• Universal Compatibility: Fits other branded recovery boards within the 18-73mm stacking height range
• Length: 115mm (4.5in)
• Note: Requires TRED Mounting Baseplate (sold separately)
• Manufacturer Part Number: T2SP115

Fits 2007-2014 Toyota FJ Cruiser (Base, Trail Teams Special Edition, and TRD Special Edition).

The ARB BASE Rack (BASE271) provides a low-profile, high-strength cargo solution engineered specifically for the Toyota FJ Cruiser. This kit includes the 84in x 51in (2135mm x 1285mm) BASE Rack, a vehicle-specific mounting kit, and a wind deflector to minimize cabin noise. Unlike traditional T-slot channels, the BASE Rack utilizes a unique dovetail extrusion system on the perimeter and internal beams. This design prevents debris buildup and allows for rapid, one-handed attachment of accessories like recovery boards, Hi-Lift jacks, and light bars without disturbing the rest of your load.

• Construction: Fully welded extruded aluminum beams with rigid internal bracing
• Finish: Integrit textured black powder-coat for superior corrosion resistance
• Mounting: Dovetail system allows for easy accessory repositioning and cable routing
• Design: Low-profile aesthetic eliminates the need for additional cross bars
• Included: 84x51in BASE Rack (PN 1770040), FJ Cruiser mount kit, and wind deflector
• Part Number: BASE271