Fits 2005-2023 Ford F-250 and F-350 Super Duty (Diesel) with 4.5-inch to 5.5-inch lift heights.

The Carli Commuter Series shock package is engineered to eliminate the harsh ride characteristics common in heavy-duty diesel trucks. Utilizing Carli’s proprietary tuning, these shocks are specifically calibrated to manage the weight of the Ford diesel powertrain, providing a balanced and compliant feel during daily driving, highway commuting, and towing. These shocks are designed to be paired with Carli 4.5-inch or 5.5-inch springs to ensure optimal suspension geometry and ride quality.

Built with 2.0-inch aluminum bodies, these shocks offer superior heat dissipation and corrosion resistance compared to standard steel units, ensuring a long-lasting finish in harsh environments. The increased suspension travel—11 inches in the front and 13.8 inches in the rear—allows the suspension to soak up large bumps that would bottom out factory components.

• Manufacturer Part Number: AS-F45SPKG-CS20IFP-A
• Proprietary tuning specific to 2005+ Ford Super Duty diesel weights
• Corrosion-resistant 2.0 aluminum shock bodies
• Front Suspension Travel: 11 inches
• Rear Suspension Travel: 13.8 inches
• Optimized for on-road comfort, highway stability, and hauling performance

Fits 2019-2024 Ram 2500 models (Big Horn, Laramie, Limited, Lone Star, Power Wagon, Rebel, and Tradesman). This Carli Pathfinder Series 2.5" shock package is engineered for the heavy-duty owner seeking the increased oil capacity and control of a 2.5" shock without sacrificing daily on-road ride quality. These shocks provide a significant upgrade in cooling capability and damping over factory units, making them ideal for towing stability and moderate off-road use.

• Construction: 2.5" aluminum bodies provide superior heat dissipation and corrosion resistance compared to traditional steel bodies.
• Finish: Finished in a gray hard coat for long-term durability in harsh environments.
• Performance: Optimized valving specifically tuned to balance highway comfort with off-road control.
• Design: Remote reservoir configuration for increased fluid volume and consistent damping under load.

Note: This package includes shocks only. Reservoir mounts are not included. Manufacturer Part Number: AS-DLVLSPKG-CS25RR-D.

Fits 2014-2018 Ram 2500 4x4 Diesel models including Big Horn, Laramie, Limited, Power Wagon, SLT, and Tradesman trims.

The Carli Pathfinder Series 2.5 leveling shock system is engineered for the enthusiast who requires the superior control and stability of a 2.5-inch large-bore shock without compromising on-road ride quality. These shocks utilize gray hard-coated aluminum bodies to provide significantly better heat dissipation and corrosion resistance compared to traditional steel-body shocks, ensuring consistent damping performance during heavy towing or off-road use.

• 2.5-inch aluminum body reservoir shocks for maximum cooling and fluid capacity
• Gray hard coat finish for high-level durability and debris protection
• Optimized internal valving tuned for leveling heights and diesel engine weight
• Includes four shocks designed to bolt directly into leveling-height applications
• Manufacturer Part Number: AS-DLVLSPKG-CS25RR-A

Note: This package includes the shock absorbers only; reservoir mounts are not included and must be provided separately.

Fits select 2014-2024 Ram 2500 models equipped with the HEMI engine. This package is designed specifically for trucks with a 2.5-inch front lift and is not compatible with models equipped with factory rear air ride.

This Carli Proprietary Tuning shock package is engineered to account for the specific front-end weight of the Ram 2500 HEMI. Designed as a direct-fit upgrade to pair with Carli leveling springs, these 2.0-inch IFP (Internal Floating Piston) shocks deliver a balanced ride for daily commuting, highway towing, and light off-road use. The aluminum shock bodies provide superior heat dissipation and corrosion resistance compared to standard steel alternatives.

• Specifically tuned for 2014-2024 Ram 2500 4x4 HEMI weight distribution
• Corrosion-resistant 2.0-inch aluminum shock bodies
• Front suspension travel: 9.5 inches
• Rear suspension travel: 11.0 inches
• Internal Floating Piston (IFP) design for consistent damping
• Compatible with 2.5-inch front leveling kits
• Manufacturer Part Number: AS-DLVLSPKG-CS20IFP-D

Fits select 2014-2023 Ram 2500 4x4 diesel models with a 2.5-inch front lift.

The Carli Spec 2.0 IFP (Internal Floating Piston) shock package is engineered to enhance ride quality for daily driving, highway commuting, and towing. These shocks feature proprietary tuning specifically weighted for heavy-duty diesel applications and are designed to pair with Carli leveling springs. The 2.0-inch aluminum shock bodies provide excellent heat dissipation and corrosion resistance, ensuring a long-lasting finish and reliable performance in various environments.

• Fits 2.5-inch front lift heights
• Proprietary Carli tuning for diesel applications
• Corrosion-resistant 2.0-inch aluminum bodies
• Front suspension travel: 9.5 inches
• Rear suspension travel: 11.0 inches
• Internal Floating Piston (IFP) design
• Manufacturer Part Number: AS-DLVLSPKG-CS20IFP-B

Note: This package is NOT compatible with vehicles equipped with factory rear air ride suspension.

Fits 2013-2023 Ram 3500 Diesel 4x4 models with 2.5 inches of front lift. Note: This kit is not compatible with vehicles equipped with factory rear air ride.

This Carli Suspension shock package features proprietary tuning developed specifically for the weight distribution of the Ram 3500 diesel. Engineered to pair with Carli leveling springs, these 2.0 IFP (Internal Floating Piston) shocks provide a significant upgrade in ride quality for daily driving, highway cruising, and heavy towing. The aluminum shock bodies offer superior heat dissipation and corrosion resistance for long-term durability in harsh environments.

• Manufacturer Part Number: AS-DLVLSPKG-CS20IFP-A
• Construction: 2.0-inch diameter aluminum shock bodies
• Front Suspension Travel: 9.5 inches
• Rear Suspension Travel: 11.0 inches
• Application: Specifically tuned for diesel engine weights and 2.5-inch leveling kits
• Corrosion-resistant finish for longevity

Fits 2014-2025 Ram 2500 4x4 models equipped with the Hemi engine and a 3" lift.

The Carli Pathfinder Series 2.5" Remote Reservoir shock package is engineered for Ram 2500 owners who require the damping control and thermal capacity of a large-bore shock without sacrificing on-road ride quality. These shocks are custom-tuned to provide a balanced feel, optimized for use with Carli Full Progressive Leaf Springs but fully compatible with the factory rear leaf pack. The 2.5" diameter aluminum bodies offer superior heat dissipation compared to traditional steel shocks, while the gray hard-coat finish ensures long-term durability against road debris and corrosion.

Designed as a comprehensive front and rear solution, these remote reservoir shocks provide the cooling capability needed for extended off-road use and the stability required for heavy towing. Please note that reservoir mounts are not included with this package.

• Bore Size: 2.5 inch diameter
• Body Material: Gray hard-coated aluminum
• Fitment: Optimized for 3" lift heights
• Compatibility: Works with OE or Carli Progressive leaf springs
• Key Benefit: Enhanced cooling and damping for high-demand environments
• Manufacturer Part Number: AS-D3SPKG-CS25RR-D

Fits 2022-2026 Toyota Tundra models including SR, SR5, Limited, Platinum, 1794 Edition, and Capstone.

The Bilstein B12 (Special) rear suspension kit is engineered to provide a precise 1-inch lift for the rear of your truck, delivering an improved stance and increased ground clearance. This kit is specifically tuned to enhance vehicle dynamics without compromising ride quality, utilizing Bilstein's advanced damper technology to achieve the perfect balance of performance and aesthetics. It serves as a direct-fit solution to optimize the rear-end height for both daily driving and utility use.

• Specifically tuned for 2022-2026 Toyota Tundra rear suspension geometry
• Provides a consistent 1-inch lift for improved clearance and leveling
• Optimized ride height for enhanced vehicle dynamics and handling
• Direct bolt-on installation using factory mounting points
• Manufacturer Part Number: 53-332356

Fits 2022-2026 Toyota Tundra 4WD models (SR, SR5, Limited, Platinum, 1794 Edition, and Capstone).

Engineered to improve vehicle control and stance, the Bilstein B12 (Special) Rear Coil Springs are designed to provide a 1-inch lift while accommodating an additional 500lb load. These springs utilize application-specific rates and geometry to deliver a precise balance of suspension dynamics, ride quality, and aesthetics on the 2022+ Tundra platform. Whether you are correcting for heavy accessories or seeking better ground clearance, these coils offer a direct-fit solution that replaces factory rear springs for optimized performance.

• Rear Lift Height: 1 inch
• Load Rating: 500lb capacity
• Series: B12 (Special)
• Manufacturer Part Number: 53-329257
• Compatibility: Specific to 4WD models
• Precision-wound for consistent spring rates and long-term durability

Fits select 2014-2025 Ram 2500 4WD trucks, including Big Horn, Laramie, Limited, Rebel, SLT, and Tradesman models.

The Bilstein B12 (Special) suspension kit is engineered to level the stance of your heavy-duty truck while enhancing overall suspension dynamics. This front coil spring set provides a 2-inch lift, allowing for increased ground clearance and a more aggressive profile without compromising ride quality. Designed to replace factory coil springs, these units utilize specific rates to handle the weight and performance demands of 4WD Ram 2500 configurations.

• Lift Height: 2 inches
• Position: Front Axle
• Series: B12 (Special)
• Application: 4WD models only
• Manufacturer Part Number: 53-317322

Fitment Applications:

Fits 2013-2025 Ram 2500 and 3500 2WD/4WD models across various trims including Tradesman, Laramie, Big Horn, and Rebel.

The Bilstein B12 (Special) suspension series is engineered to optimize your heavy-duty truck's stance and handling. This front coil spring set provides a targeted 2 to 2.3-inch lift height, effectively leveling the vehicle or providing the necessary clearance for larger wheel and tire combinations. By replacing the factory front coils, these springs improve suspension dynamics and ride quality without compromising the durability required for heavy towing or off-road use.

• Manufacturer Part Number: 53-317315
• Series: B12 (Special)
• Position: Front
• Lift Height: 2-2.3 inches
• Quantity: Set of 2 (Left and Right)
• Performance: Optimized spring rates for improved control and aesthetics

Fits 2005-2026 Ford F-250 and F-350 Super Duty models.

The Bilstein B12 (Special) front coil spring set is engineered to recalibrate your vehicle's ride height for improved ground clearance and a leveled stance. These springs provide a precise 2-inch front lift, specifically tuned to enhance suspension dynamics and aesthetics without compromising the heavy-duty performance of your Ford Super Duty. Constructed with high-tensile materials, these springs are designed to replace worn factory components or to serve as the foundation for a suspension upgrade, ensuring your truck maintains optimum geometry and handling characteristics.

• Series: B12 (Special)
• Lift Height: 2 inches
• Position: Front
• Manufacturer Part Number: 53-317308
• Engineered for optimized suspension travel and ride quality

Fits 2008-2021 Toyota Land Cruiser (Base and Heritage Edition).

Engineer your suspension for superior load-carrying capacity with Bilstein B12 Special Rear Lift Springs. Designed specifically for the 200-series Toyota Land Cruiser, these heavy-duty coil springs provide a 1.5-inch lift to accommodate constant additional weight from bumpers, winches, or expedition gear. By restoring lost ride height and improving spring rate, these coils eliminate sagging and maintain vehicle stability under load.

Manufactured to rigorous tolerances, the Bilstein B12 Special series ensures predictable handling and durability whether on-road or traversing technical terrain. These springs are an essential upgrade for overlanders and utility-focused owners who require increased ground clearance and improved rear-end support.

• Manufacturer Part Number: 53-297686
• Position: Rear
• Lift Height: 1.5 Inches
• Application: Heavy Load
• Compatibility: Toyota Land Cruiser 200 Series (2008-2011, 2013-2021)

Fits 2008-2021 Toyota Land Cruiser Base and Heritage Edition models.

The Bilstein B12 (Special) rear suspension kit is engineered to provide a 1.75-inch lift while optimizing vehicle dynamics for the Toyota Land Cruiser. This kit replaces factory rear components to improve stance and handling, utilizing Bilstein gas-pressure technology to deliver consistent damping performance under varying loads. Designed for drivers who demand a specific ride height without compromising ride quality, the B12 (Special) series provides a precise combination of suspension travel and stability.

• Specifically tuned for a 1.75-inch rear lift height
• Optimizes suspension dynamics for improved stability and aesthetics
• Engineered to replace worn or factory-standard rear components
• Durable finish for long-term corrosion resistance
• Manufacturer Part Number: 53-292018

Fits select 2003-2024 Toyota 4Runner, Tacoma, FJ Cruiser, and Lexus GX460/GX470.

The Bilstein B12 (Special) front suspension kit is engineered to recalibrate your vehicle's stance and handling characteristics. Designed for drivers seeking a precise balance of suspension dynamics and aesthetics, this kit utilizes Bilstein’s proven damping technology to optimize ride height for improved performance on and off the road. By replacing factory front components, the B12 series provides a more controlled driving experience, reducing body roll and improving front-end stability.

• Manufacturer Part Number: 53-291387
• Position: Front
• Optimizes ride height for enhanced vehicle performance and appearance
• Engineered for specific vehicle dynamics and load requirements
• High-quality construction for long-term durability in various driving conditions
• Direct fitment for supported Toyota and Lexus platforms

Fits 2008-2016 Smart Fortwo (Brabus, Electric Drive, Passion, Passion Cabrio, and Pure).

The Bilstein B14 (PSS) suspension kit provides track-inspired handling and ride height adjustability in an OE-quality, direct-fit package. These kits utilize monotube gas pressure dampers paired with application-specific matched springs to deliver superior control and damping performance. The threaded body design gives you the flexibility to tune your ride height between 30mm and 50mm of lowering, allowing for a customized stance and improved center of gravity.

Each B14 system is engineered in Germany and tested on the Nürburgring to ensure optimal performance under demanding conditions. To protect against the elements, the kit features zinc-coated bodies and Bilstein's Triple-C-Technology surface coating for long-lasting corrosion resistance, ensuring the threaded bodies remain adjustable even after exposure to harsh road salt and debris.

• Manufacturer Part Number: 47-165403
• Design: Monotube gas pressure construction
• Height Adjustment: Approximately 30mm to 50mm lowering
• Finish: Zinc-plated with Triple-C-Technology coating
• Testing: Nürburgring track-tested and tuned
• Installation: Direct bolt-on to factory mounting points

Fits select 2014-2024 Mini Cooper, Cooper S, JCW, Clubman, Coupe, and Roadster models (L4-2.0L).

The Bilstein B12 (Pro-Kit) suspension system is a comprehensive performance upgrade that replaces your factory struts, shocks, and springs with a precision-engineered solution. This kit combines four Bilstein performance dampers with a matched set of Eibach Pro-Kit progressive springs to lower your vehicle's center of gravity and significantly improve cornering dynamics.

Each component is tuned for the specific Mini chassis to provide a moderate lowering height of 25-40mm, depending on the specific application. The result is a more aggressive stance, reduced body roll, and predictable handling without the harshness often found in generic coilover setups. This kit is designed to bolt directly to factory mounting points for a straightforward installation.

• Complete set includes front and rear Bilstein dampers and Eibach Pro-Kit springs
• Lowering range of approximately 25-40mm (application specific)
• Progressive spring characteristics for daily comfort and performance control
• Precision-tuned for improved suspension dynamics and safety reserves
• Manufacturer Part Number: 46-254665

Fits 1996-1999 BMW M3 Base.

The Bilstein B12 Pro-Kit suspension system (MPN 46-242808) is a complete, pre-matched performance upgrade designed to enhance the handling and aesthetics of your E36 M3. This kit replaces the factory components with a set of Bilstein performance dampers specifically valved to work in harmony with Eibach Pro-Kit lowering springs. The result is a fixed-height solution that eliminates the guesswork of matching individual components.

By utilizing Eibach progressive-rate springs, the B12 kit provides a moderate lowering range of 25-40mm, depending on vehicle weight and configuration. This lower center of gravity reduces body roll and nose dive, while the Bilstein dampers ensure precise response and high safety reserves during spirited driving. This kit is engineered to bolt directly to factory mounting points for a straightforward installation.

• Engineered for 1996-1999 BMW M3 models
• Estimated lowering range of 25-40mm (application dependent)
• Includes application-specific Bilstein performance dampers
• Eibach Pro-Kit progressive springs for balanced ride and handling
• Direct-fit replacement for OE suspension hardware
• Precise road feedback and predictable control
• Manufacturer Part Number: 46-242808

Fits 1999-2006 BMW 323Ci, 323i, 325Ci, 325i, 328Ci, 328i, 330Ci, and 330i models.

The Bilstein B12 Pro-Kit is a comprehensive suspension solution designed to enhance the handling and aesthetics of your BMW. This kit replaces the factory shocks and springs with a performance-matched set of Bilstein dampers and Eibach Pro-Kit springs. By pairing these components, Bilstein ensures the damping rates are specifically tuned to the progressive characteristics of the Eibach springs, providing a predictable and refined driving experience.

Depending on the specific application, this kit provides a moderate lowering of 25-40mm, effectively reducing fender gap and lowering the center of gravity. This results in improved cornering dynamics, reduced body roll, and a more aggressive stance without the harshness often associated with aftermarket suspension setups.

• Complete front and rear kit (4 dampers, 4 springs)
• Eibach Pro-Kit performance springs with progressive rates
• Dampers and springs tuned specifically for the E46 chassis
• Moderate lowering of 25mm to 40mm (application dependent)
• Precision handling and improved safety reserves
• Manufacturer Part Number: 46-242792

Fits 2006-2010 Dodge Charger models including Base, Daytona R/T, R/T, SE, and SXT (V8-2.7L / 3.5L / 5.7L).

The Bilstein B12 (Pro-Kit) suspension system is a complete chassis upgrade designed to replace worn factory components with a precision-tuned performance setup. This kit eliminates the guesswork of matching individual components by pairing application-specific Bilstein Performance dampers with Eibach Pro-Kit progressive-rate springs. The result is a lowered center of gravity and significantly reduced body roll without the harshness often found in generic lowering kits.

Each kit is engineered to provide a fixed-height lowering solution of approximately 24mm to 40mm, depending on the specific vehicle configuration. By utilizing progressive spring characteristics, the B12 kit maintains daily-driver comfort during normal cruising while stiffening up under load for predictable control during aggressive cornering. This is a direct-fit bolt-on solution that installs into factory mounting points for a professional-grade suspension overhaul.

• Complete set including front and rear dampers and springs
• Eibach Pro-Kit performance springs with progressive winding
• Bilstein Performance dampers tuned for specific vehicle dynamics
• Moderate lowering between 24-40mm for improved aesthetics and aerodynamics
• Manufacturer Part Number: 46-234377

Fits 2005-2012 Porsche 911 Carrera, Carrera S, GTS, GT2, GT3, and Speedster models (H6-3.6L).

The Bilstein B12 (Pro-Kit) suspension system is a comprehensive, performance-tuned solution designed to enhance the handling and stance of your Porsche 911. This kit pairs Bilstein high-gas pressure monotube dampers with Eibach Pro-Kit progressive springs, offering a moderate lowering range of 25-40mm depending on your specific vehicle configuration. These components are meticulously road-tested and tuned to work in harmony, providing a precise response and increased safety reserves without sacrificing ride quality.

By lowering the vehicle's center of gravity and utilizing progressive spring characteristics, the B12 kit reduces body roll during cornering and squat under acceleration. It is an ideal fixed-height solution for enthusiasts looking for the perfect balance between suspension dynamics, durability, and a more aggressive aesthetic.

• Provides moderate lowering between 25-40mm for a lower center of gravity
• Includes a complete set of Bilstein performance dampers and Eibach Pro-Kit springs
• Precision-tuned for the specific Porsche 997-generation chassis
• Progressive spring rates maintain daily driving comfort while improving cornering performance
• High-gas pressure technology ensures consistent damping performance
• Manufacturer Part Number: 46-193759

Fits 2007-2009 Mazda 3 Mazdaspeed.

The Bilstein B12 (Pro-Kit) suspension system is a complete performance handling solution engineered specifically for the Mazdaspeed 3 chassis. This kit replaces your factory components with a precision-tuned combination of Bilstein high-pressure gas dampers and Eibach Pro-Kit progressive-rate springs, providing a lower center of gravity and sharper response.

Designed for a moderate lowering of 25-40mm, this setup improves vehicle dynamics by reducing body roll and squat while maintaining daily-driver comfort. Every component is application-specific, ensuring the dampers are professionally valved to work in harmony with the Eibach spring rates for predictable control and high reserves of safety.

• Performance Lowering: Drops ride height between 25-40mm (application-dependent)
• Precision Dampers: Includes a complete set of Bilstein gas-pressure performance dampers
• Progressive Springs: Eibach Pro-Kit springs provide excellent driving dynamics and aesthetics
• Direct Bolt-On: Tuned for each specific application to ensure OE-level fitment and reliability
• Manufacturer Part Number: 46-190321

Fits 1997-2002 BMW Z3 Roadster models.

The Bilstein B12 (Pro-Kit) suspension kit is a comprehensive performance upgrade engineered to enhance handling dynamics and aesthetics without the complexity of adjustable coilovers. This kit pairs specifically tuned Bilstein performance dampers with Eibach Pro-Kit progressive springs to provide a fixed-height lowering solution that maintains ride quality while significantly sharpening chassis response and reducing body roll.

• Performance Lowering: Delivers a moderate drop between 25-40mm for a more aggressive stance and a lower center of gravity.
• Expertly Tuned: Features Bilstein dampers and Eibach springs that are valved and rated to work in harmony for the Z3 chassis.
• Progressive Spring Rates: Eibach Pro-Kit springs offer comfortable initial travel for daily driving with increasing firmness under load for predictable control.
• High Reserves of Safety: Engineered for precise steering response and excellent driving dynamics in all conditions.
• Manufacturer Part Number: 46-189509

Fits 1995-2001 BMW 740i and 740iL (Base).

The Bilstein B12 (Pro-Kit) suspension system is a complete, bolt-on solution designed to enhance the handling and aesthetics of your BMW 7-Series. This kit pairs four Bilstein performance-valved dampers with Eibach Pro-Kit progressive-rate springs, providing a moderate lowering range of 24-40mm depending on the specific configuration. Each kit is application-tuned to deliver precise response and improved driving dynamics while maintaining high safety reserves.

• Manufacturer Part Number: 46-189479
• Lowering Range: 25-40mm (varies by application)
• Damping: Bilstein performance-tuned gas-pressure shocks
• Springs: Eibach Pro-Kit with progressive characteristics
• Fitment: Engineered specifically for OE replacement on the BMW E38 chassis
• Performance: Reduced body roll and improved cornering stability

Fits 2003-2008 Audi A4 Quattro Base models.

The Bilstein B12 (Pro-Kit) suspension system is a precision-engineered lowering solution that replaces your factory shocks and springs with a performance-tuned matched set. By pairing Bilstein high-performance gas-pressure dampers with Eibach Pro-Kit progressive-rate springs, this kit provides a moderate lowering of 24-40mm (depending on vehicle weight and configuration). This specific combination is valved and tuned to eliminate the guesswork of mismatched components, delivering a lower center of gravity, reduced body roll, and improved handling response for the B6 and B7 chassis.

• Performance Dampers: Bilstein gas-pressure technology specifically tuned for each application to maintain ride comfort while improving dynamics.
• Progressive Springs: Eibach Pro-Kit springs provide a firmer rate under compression while maintaining streetable compliance.
• Lowering Range: Provides a fixed-height drop of approximately 24mm to 40mm.
• Direct Fit: Replaces OE suspension components using factory mounting points for a straightforward installation.
• Complete Set: Includes a full set of front and rear dampers and springs.
• MPN: 46-188502

Fits 1991-1997 BMW 840Ci, 850Ci, 850CSi, and 850i models.

The Bilstein B12 (Pro-Kit) suspension system is a comprehensive performance upgrade designed to enhance the handling dynamics and stance of the BMW E31 chassis. This kit replaces the factory struts and shocks with high-pressure Bilstein Performance dampers specifically valved for this application, paired with Eibach Pro-Kit lowering springs. The result is a significantly more responsive driving experience with reduced body roll and a lower center of gravity without sacrificing daily drivability.

By utilizing Eibach progressive spring characteristics, the B12 kit maintains road-compliant comfort during normal cruising while providing increased stiffness under heavy cornering loads. This precision-engineered combination provides a fixed-height lowering solution that eliminates the guesswork of matching individual dampers and springs.

• Performance Dampers: Bilstein gas-pressure shocks specifically tuned for the 8-Series chassis
• Lowering Springs: Eibach Pro-Kit progressive-rate springs for improved aesthetics and control
• Lowering Range: Provides a moderate drop of 24-40mm depending on application
• Handling: Enhanced steering response, precise feedback, and increased safety reserves
• Manufacturer Part Number: 46-188106

Fits 2005-2018 Volkswagen Jetta models including TDI, GLI, Hybrid, and 2.0T editions. This complete suspension system provides a tuned, fixed-height lowering solution for improved handling and vehicle aesthetics.

The Bilstein B12 (Pro-Kit) combines four Bilstein performance gas-pressure dampers with a matched set of Eibach Pro-Kit springs. This partnership ensures that every component is valved and rated to work in harmony, delivering a lowering range of 24mm to 40mm depending on the specific submodel. The progressive spring characteristics provide a comfortable ride during normal cruising while stiffening under load for precise response and reduced body roll during spirited driving.

• Complete front and rear kit: Bilstein performance dampers and Eibach Pro-Kit springs
• Lowering range: 24-40mm (varies by application)
• Progressive spring design for excellent driving dynamics and safety reserves
• Application-specific tuning for predictable control and precise steering response
• Manufacturer Part Number: 46-184290

Fits select 2009-2016 BMW Z4 sDrive28i and sDrive30i models.

The Bilstein B12 Pro-Kit (MPN 46-181268) is a complete, bolt-on suspension solution designed for drivers who want a lower stance without the guesswork of mixing and matching components. This kit pairs high-pressure gas-pressurized Bilstein performance dampers with Eibach Pro-Kit progressive-rate springs, creating a system that is specifically tuned for the weight and geometry of the BMW E89 chassis.

By replacing the factory dampers and springs with this matched set, you achieve a moderate lowering of 25-40mm (depending on application). This lower center of gravity reduces body roll during cornering and minimizes nose-dive under braking. The progressive spring characteristics ensure a compliant ride during normal cruising while stiffening up under load for precise, predictable handling when pushed.

• Lowering Range: Approximately 25-40mm for a clean, aggressive stance.
• Matched Components: Bilstein dampers and Eibach Pro-Kit springs tuned for application-specific dynamics.
• Progressive Springs: Maintains ride comfort while providing increased safety reserves.
• Durable Construction: Built to withstand high-performance driving conditions.
• MPN: 46-181268

Fits select 2008-2017 Mercedes-Benz C250, C300, C350, E350, E400, and E550.

The Bilstein B12 (Pro-Kit) suspension system is a comprehensive performance upgrade that pairs application-specific Bilstein dampers with Eibach Pro-Kit springs. This combination is engineered to provide a fixed-height lowering solution that significantly enhances vehicle dynamics while maintaining a composed ride quality for daily driving.

Each kit is precisely tuned for its specific application to ensure the best possible balance between handling precision and comfort. By lowering the center of gravity and utilizing Eibach's progressive spring characteristics, this kit reduces body roll and nose-dive for more predictable control during spirited cornering.

• Lowering Range: 24mm to 40mm (application dependent)
• Spring Type: Eibach Pro-Kit performance springs with progressive characteristics
• Shock Type: Tuned Bilstein performance gas-pressure dampers
• Benefit: Improved steering response and reduced fender-to-tire gap
• System: Complete front and rear suspension solution
• Manufacturer Part Number: 46-180766

Fits 2007-2011 BMW 335i and 335d Base models.

The Bilstein B12 (Pro-Kit) suspension system is a comprehensive performance upgrade designed to improve handling and aesthetics without the complexity of adjustable coilovers. This kit pairs a complete set of application-specific Bilstein performance dampers with Eibach Pro-Kit progressive-rate springs. By replacing the worn factory components with this tuned system, you achieve a fixed-height lowering solution that enhances steering response and reduces body roll during cornering.

• Specifically tuned for the BMW E90 chassis to ensure optimal suspension dynamics.
• Includes four Bilstein performance dampers and four Eibach Pro-Kit springs.
• Provides moderate lowering between 24mm and 40mm depending on vehicle configuration.
• Progressive spring design maintains ride quality while increasing firmness under load.
• Direct-fit installation to factory mounting points.
• Manufacturer Part Number: 46-180568