Fits select 1975-1988 Volkswagen Jetta, Rabbit, and Scirocco models.

The Bilstein B12 (Pro-Kit) suspension system is a comprehensive performance upgrade designed to improve handling and aesthetics through a balanced combination of dampers and springs. This kit replaces the factory suspension with Bilstein performance gas-pressure dampers and Eibach Pro-Kit progressive-rate springs, providing a moderate, fixed-height lowering of 25-40mm depending on the application.

Engineered for drivers seeking more precise steering response and reduced body roll, the B12 system is tuned specifically for each vehicle to maintain a high level of comfort while enhancing driving dynamics. The progressive spring characteristics ensure a compliant ride during normal cruising while firming up under load for better cornering stability and predictable control.

• Complete set including Bilstein performance dampers and Eibach Pro-Kit springs
• Lowering range of 25-40mm for a lower center of gravity and improved stance
• Progressive spring design for excellent dynamics and safety reserves
• Vehicle-specific tuning for optimized suspension harmonics
• Durable construction designed for long-lasting performance
• Manufacturer Part Number: 46-189868

Fits 2009-2016 Audi A4 Quattro and S4.

The Bilstein B12 (Pro-Kit) suspension system is a complete, vehicle-specific solution for drivers looking to improve chassis dynamics and aesthetics. This kit pairs Bilstein performance dampers with Eibach Pro-Kit springs, specifically tuned for the Audi B8/B8.5 platform to provide a fixed-height lowering solution. The combination replaces the factory shocks and springs with components engineered to work in unison, delivering a more aggressive stance and precise handling characteristics.

• Delivers moderate lowering between 24-40mm depending on vehicle application
• Includes Bilstein performance dampers and Eibach Pro-Kit progressive-rate springs
• Engineered for precise response, excellent driving dynamics, and high safety reserves
• Fixed-height design provides predictable control and improved cornering
• Application-specific tuning ensures optimal suspension travel and ride quality
• Manufacturer Part Number: 46-183330

Fits 2007-2009 Mazda 3 Mazdaspeed.

The Koni 1125 1039 STR.T Kit provides a complete suspension solution for the first-generation Mazdaspeed3. This performance-matched set combines Koni’s signature orange STR.T high-performance dampers with Eibach lowering springs to enhance handling, reduce body roll, and provide a more aggressive stance. By pairing specifically valved dampers with engineered spring rates, this kit eliminates the guesswork of mixing and matching individual components.

Designed as a direct bolt-on replacement for the factory suspension, the STR.T kit offers improved chassis control and feedback for spirited driving while maintaining a composed ride for daily use. The dampers feature fixed-rate performance valving that is optimized for the included Eibach springs, ensuring a balanced and predictable driving experience.

• Complete car set: Includes 4 Koni STR.T dampers and 4 Eibach lowering springs
• Koni STR.T dampers with signature orange finish
• Eibach lowering springs for a reduced center of gravity and improved aesthetics
• Specifically valved for the weight and suspension geometry of the Mazdaspeed3
• Direct OE replacement using factory mounting points
• Manufacturer Part Number: 1125 1039

Fits 2011-2023 Ford F-250 and F-350 Super Duty 4x4 models with gas engines and a 2.5-inch front lift.

Specifically engineered for the unique weight distribution of gas-powered Super Duty trucks, the Carli Signature Series 2.0 IFP (Internal Floating Piston) shock package is designed to replace factory shocks for a significant upgrade in ride quality. These shocks are valved for balanced performance across on-road commuting, highway travel, and heavy-duty towing or hauling, making them an ideal all-around suspension solution for leveled trucks.

The 2.0-inch aluminum shock bodies provide superior heat dissipation and excellent corrosion resistance compared to steel alternatives. This package is optimized for use with Carli leveling springs, delivering increased suspension travel to better manage rough terrain and road imperfections.

• Manufacturer Part Number: AS-FLVLSPKG-CS20IFP-C
• Shock Diameter: 2.0" aluminum body for cooling and durability
• Front Travel: 9.0 inches
• Rear Travel: 12.3 inches
• Tuning: Carli-proprietary gas-specific valving
• Configuration: Front and rear shock set

Fits select 2019-2025 Ram 1500 models including Big Horn, Laramie, and Tradesman.

The Bilstein B12 (Special) suspension kit is a precision-engineered solution designed to optimize your vehicle's ride height and performance. This rear suspension kit provides a 1-inch lift, utilizing Bilstein’s advanced damping technology to achieve the ideal balance of suspension dynamics and ride quality. Whether you are correcting factory rake or seeking a slight height increase, the B12 (Special) series ensures your truck maintains optimal stability and handling characteristics.

• Engineered for a 1-inch rear lift
• Optimized suspension dynamics for improved handling and stability
• Combines high-quality performance with improved vehicle aesthetics
• Designed for precise fitment on Ram 1500 platforms
• Manufacturer Part Number: 53-297839

Fits 2015-2024 Ford F-150 (XL, XLT, Lariat, King Ranch, Platinum, Limited, Raptor, Tremor, STX, SSV, and Police Responder).

This UMI Performance rear shock kit features a Viking D220 double adjustable shock, engineered to provide precise suspension tuning for the Ford F-150. To ensure a perfect installation on the F-150 chassis, UMI includes custom-machined spacers that adapt the Viking D220 bushing width to the factory mounting points. With 19 independent compression and 19 independent rebound settings, this assembly allows you to dial in your truck's damping for both street performance and race applications.

• Viking D220 double adjustable shock absorber with 19 compression and 19 rebound settings
• Four CNC-machined UMI spacers ensure proper bushing width for Ford F-150 fitment
• Includes all necessary installation hardware
• Street and race-proven damping technology
• Requires two (2) per truck; sold individually
• Manufacturer Part Number: 6569

Fits 2004-2012 Chevrolet Colorado and GMC Canyon models.

The Rust Buster RB7503L is a heavy-duty replacement for the driver side (left) rearward leaf spring mount. Designed specifically to address common corrosion issues on mid-size GM truck frames, this mount restores the structural integrity of your rear suspension. By providing a secure, stable anchor point for the leaf springs, it ensures proper axle alignment and handling performance.

• Positions: Rearward, Driver Side (Left)
• Replaces compromised or rusted-out factory spring mounts
• Engineered to match original equipment dimensions for simplified fitment
• Helps maintain correct suspension geometry and load-bearing capacity
• Manufacturer Part Number: RB7503L

Fits 1994-1998 Porsche 911 Carrera, Carrera 2, Carrera 4, Carrera 4S, Carrera S, RS America, Speedster, and Targa.

The Bilstein B12 (Pro-Kit) suspension kit provides a comprehensive handling solution by pairing Bilstein Performance dampers with Eibach Pro-Kit springs. This system is specifically tuned for the 1994-1998 Porsche 911 chassis to offer a moderate lowering between 24mm and 40mm, depending on the specific model. By lowering the center of gravity and utilizing progressive-rate springs, this kit improves steering response and reduces body roll while maintaining ride quality suitable for the street.

• Complete set of Bilstein dampers and Eibach Pro-Kit performance springs
• Delivers a moderate lowering range of 24-40mm for a centered, aggressive stance
• Progressive spring characteristics ensure precise response and high safety reserves
• Tuned for application-specific suspension dynamics and predictable control
• Replaces factory dampers and springs with high-performance components
• Manufacturer Part Number: 46-193605

Fits 2008-2017 Audi A5 Quattro and S5.

The Bilstein B12 (Pro-Kit) suspension system provides a comprehensive handling upgrade for enthusiasts looking for a fixed-height lowering solution. This kit combines a complete set of Bilstein high-pressure gas performance dampers with Eibach Pro-Kit progressive-rate springs, specifically tuned to match the suspension geometry of the Audi A5/S5 chassis. By lowering the center of gravity between 25mm and 40mm, the B12 kit significantly reduces body roll and nose dive while providing a more aggressive, performance-oriented stance.

• Includes Bilstein performance dampers and Eibach Pro-Kit performance springs
• Offers moderate lowering between 25-40mm depending on specific vehicle weight and trim
• Progressive spring rates maintain daily driving comfort with increased cornering stability
• Engineered for precise response and predictable control under heavy load
• Manufacturer Part Number: 46-189721

Vehicle Fitment

Fits 2009-2016 Audi A4 and A4 Quattro (Base, Premium, Premium Plus, Prestige, and Avant trims).

The Bilstein B12 (Pro-Kit) is a complete performance suspension solution engineered to provide a fixed-height lowering solution without sacrificing ride quality. This system combines four Bilstein performance-tuned dampers with a matched set of Eibach Pro-Kit lowering springs. The result is a significant improvement in handling dynamics, reduced body roll, and a more aggressive stance that closes the wheel-well gap by approximately 25-40mm depending on the specific application.

Each kit is application-specific, ensuring the progressive spring rates and damper valving work in harmony with the Audi A4 chassis. The gas-pressure dampers maintain consistent performance even under heavy loads, while the Eibach springs provide a predictable, controlled response during cornering and braking.

• Complete front and rear kit (4 dampers, 4 springs)
• Lowers vehicle 25-40mm for improved aesthetics and center of gravity
• Bilstein gas-pressure technology for fade-free performance
• Eibach Pro-Kit progressive rate performance springs
• Engineered for precise response and excellent driving dynamics
• Manufacturer Part Number: 46-183323

Fits 2003-2013 Dodge Ram 1500 (Gas), 2500 (Diesel), and 3500 (Diesel) models.

These Synergy Manufacturing 3.0-inch lift coil springs are engineered to improve the stance and off-road performance of your heavy-duty Ram. Designed as a direct replacement for the factory front springs, they provide additional ground clearance and room for larger tire configurations while maintaining a controlled, predictable ride quality on and off the pavement.

The 8555-30-HD series features a spring rate specifically tuned for the weight of Cummins diesel engines and heavy-duty gas applications, preventing the sagging often associated with lesser aftermarket springs. These coils are finished in a durable coating to resist corrosion and the harsh environments typical of under-vehicle components.

• Provides 3.0 inches of lift height for improved tire clearance
• Optimized spring rates for heavy-duty Dodge Ram applications
• Compatible with 2003-2013 Ram 1500 Gas and 2500/3500 Diesel platforms
• Direct-fit installation into factory spring buckets
• Manufacturer Part Number: 8555-30-HD

Fits select 2019-2023 Ram 1500 4x4 models (Big Horn, Laramie, Limited, Rebel, Tradesman, TRX).

The Carli-SPEC Commuter shock package is engineered for owners seeking a controlled, smooth on-road ride with improved handling characteristics. This set levels the 2019-2023 Ram 1500 platform by providing approximately 2.5 inches of front lift height using precision-tuned 2.5-inch internal reservoir front coilovers. The rear suspension is upgraded with 2.0-inch internal reservoir shocks featuring durable aluminum bodies for superior heat dissipation and rubber shock boots to protect the shafts from debris.

• Front Lift: 2.5 inches (height may vary by trim such as Rebel or EcoDiesel)
• Front Shocks: 2.5-inch internal reservoir coilovers
• Rear Shocks: 2.0-inch internal reservoir aluminum body shocks
• Compatibility: Works with factory Ram upper control arms (UCAs)
• Installation Requirements: Requires Carli rear coils and sway bar end links (sold separately)
• Manufacturer Part Number: AS-RAM15SPKG-CS20IFP-B

Vehicle Fitment:

• 2019-2023 Ram 1500 Big Horn, HFE, Laramie, Limited, Lone Star, Rebel, Tradesman
• 2019-2021 Ram 1500 Laramie Longhorn
• 2021-2023 Ram 1500 Limited Longhorn, TRX
• 2021 Ram 1500 Longhorn, TRX Launch Edition
• 2020-2021 Ram 1500 Special Service

Fits select 2007-2018 Chevrolet Silverado and GMC Sierra models.

The Rust Buster RB7337 Rearward Leaf Spring Mount provides a precise solution for repairing chassis corrosion at a critical suspension pick-up point. Instead of replacing an entire frame rail, this component allows for a targeted repair of the deteriorated factory mount, restoring structural integrity to the rear suspension. Designed to maintain original equipment (OE) geometry, it ensures proper leaf spring alignment and ride height for vehicles operating in high-corrosion environments.

• Direct replacement for corroded factory rearward leaf spring mounting points
• Engineered to fit the frame contours of 2007-2018 Silverado and Sierra trucks
• Restores suspension safety and structural frame integrity
• Manufacturer Part Number: RB7337

Fits select 2014-2024 Ram 2500 and 2013-2024 Ram 3500 (Multiple Trims).

The Carli Suspension Front Reservoir Mount is engineered specifically to provide a secure, vibration-resistant mounting solution for the 2.5-inch remote reservoirs included in the Carli Pathfinder Shock Package. These mounts ensure proper reservoir orientation and clearance, preventing interference with other suspension components while allowing for maximum cooling during heavy cycles.

• Designed specifically for the Carli Pathfinder Shock Package with 2.5" shock bodies
• Precision-engineered for heavy-duty Ram 2500 and 3500 chassis
• Ensures stable reservoir placement for consistent suspension performance
• Heavy-duty construction for off-road reliability
• Manufacturer Part Number: CS-DRM-14-CS25

Fits 2018-2025 Jeep Wrangler JL and 2020-2025 Jeep Gladiator JT models equipped with a 2-3.5 inch suspension lift.

The FOX QSE-Links (Quick Switch Electronic) sway bar disconnects eliminate the manual struggle of traditional off-road preparation. Instead of exiting the vehicle to pull stuck cotter pins and wrestle with greasy end links, you can now disconnect your sway bar instantly from the driver’s seat. This system allows for maximum suspension articulation at any speed and in any drive mode, significantly reducing "head toss" and improving ride comfort on technical trails.

Engineered for durability and stability, these links feature specialized digressive damping. This ensures that even when the sway bar is disconnected, the vehicle remains controlled and stable through varied terrain. The compact packaging is designed for a straightforward bolt-on installation, fitting within the tight clearances of the Jeep JL and JT wheel wells.

• In-cab, on-the-fly electronic sway bar disconnect
• Allows for maximum articulation without leaving the driver's seat
• Digressive damping characteristics maintain vehicle stability while disconnected
• Compatible with 2-inch to 3.5-inch lift heights
• Small packaging for easy, bolt-on installation
• Manufacturer Part Number: 883-02-221

Fits 2017-2022 Ford F-250 and F-350 Super Duty 4x4 Diesel models.

The Carli Signature Leveling System is a comprehensive suspension upgrade designed to level the stance and significantly improve the ride quality of your Ford Super Duty. This kit provides a 2.5-inch lift for F-250 models or a 3.5-inch lift for F-350 models, providing clearance for larger tires while enhancing off-road capability and on-road comfort.

The system features Carli’s custom-tuned Signature Series shocks, built for durability with a corrosion-resistant finish and backed by a limited lifetime warranty. To maintain proper suspension geometry, the kit includes an adjustable track bar to re-center the axle and caster correction shims to ensure factory-like steering feel and stability.

• Carli Signature Series front and rear shock package
• Linear rate front coil springs
• Adjustable track bar for precise axle alignment
• Caster correction shims
• Extended brake line kit
• Front bump stop drops
• Increases wheel travel to 9 inches front and 13 inches rear
• Manufacturer Part Number: CS-FLVL-SIG-17

Fits select 1994-2013 Dodge and Ram 2500/3500 trucks with 2.75 inches of front lift. Carli Suspension Signature Series 2.0 Front Shocks are engineered to provide a significant improvement in ride quality and off-road capability for heavy-duty Ram platforms. These shocks are specifically tuned to deliver 10 inches of front wheel travel, allowing for better articulation and damping performance in varied terrain.

Built for long-term durability in harsh environments, each shock body features a zinc-plated finish and a protective clearcoat to resist corrosion. The included rubber shock boots shield the shafts from road debris, mud, and grit that can cause premature seal failure. These shocks utilize high-quality bushings for a direct fit into factory mounting locations.

• Provides 10" of front wheel travel
• Zinc-plated and clear-coated shock bodies for superior corrosion resistance
• Protective rubber boots included to shield shock shafts
• Includes application-specific bushings for secure mounting
• Manufacturer Part Number: CS-DSIG20FRONTSPKG-94
• Backed by Carli's Lifetime Warranty

Fits select 2013-2023 Ram 2500 and 3500 models.

Carli Dominator Front Lower Shock Mounts provide a critical reinforcement for heavy-duty Ram trucks. Designed to replace the thin factory mounts, these weld-on brackets are engineered to handle the increased leverage and dampening forces of high-performance suspension systems. They are a recommended upgrade for any owner running 2.5-inch or 3.0-inch diameter shocks or those who take their vehicle into aggressive off-road environments.

Constructed from boxed 1/4-inch steel, these mounts offer superior rigidity and durability compared to the OE stampings. The weld-in design ensures a permanent, high-strength connection to the axle housing, preventing the mount deflection or failure common with oversized shocks on stock hardware.

• Manufacturer Part Number: CS-DLSM-14-F
• Material: 1/4-inch steel
• Design: Fully boxed for maximum strength
• Installation: Weld-on
• Compatibility: Optimized for 2.5-inch and 3.0-inch shocks

Fits 2014-2024 Ram 2500 Diesel models including Tradesman, Laramie, Power Wagon, and Rebel.

The Carli Pathfinder Series 2.5" shock system is engineered for owners who require the damping control and thermal stability of a 2.5" shock while maintaining optimized on-road comfort. Custom tuned for a 3.25" level height, these shocks provide a significant upgrade in cooling capability and off-road stability compared to smaller diameter options. The aluminum bodies offer superior heat dissipation and corrosion resistance over standard steel shocks.

• 2.5" Aluminum body reservoir shocks with gray hard-coat finish
• Custom tuned for 3.25" front lift height and optimal ride quality
• Compatible with Carli Full Progressive Leaf Springs or factory leaf packs
• Increased fluid capacity for improved cooling and fade resistance
• Enhanced towing stability and off-road control
• MPN: AS-D3SPKG-CS25RR-A

Note: This package includes shocks only; reservoir mounts are not included.

Fits 1998-2002 Chevrolet Camaro and Pontiac Firebird (Base, Z28, Z28 SS, Formula, and Trans Am).

The Koni 1145 Sport Kit (MPN: 1145 1071) is a performance-engineered suspension solution designed to enhance the handling and stance of the GM F-Body chassis. This kit combines Koni Sport "Yellow" dampers with carefully matched lowering springs to provide a significant reduction in body roll and improved steering precision without sacrificing street drivability.

• Adjustable Damping: Features externally adjustable rebound settings, allowing you to fine-tune the suspension to your driving style or road conditions.
• Lowered Center of Gravity: The included springs lower the vehicle for a more aggressive profile and flatter cornering.
• Premium Construction: Designed as a direct bolt-on replacement for factory components, utilizing existing mounting points for a precise fit.
• Complete Set: Includes a full set of front and rear Koni Sport dampers and performance lowering springs.
• Manufacturer Part Number: 1145 1071

Fits 2024-2026 Toyota Tacoma 4WD Limited, SR5, TRD Off-Road, and TRD Sport models equipped with the i-Force engine.

The Bilstein B12 (Special) rear coil spring set is engineered to provide a 1-inch lift, optimizing your truck's ride height for improved aesthetics and suspension performance. These springs are specifically tuned to integrate with the 2024+ Tacoma chassis, replacing the factory rear coils to deliver a more aggressive stance and refined suspension dynamics without compromising ride quality. Whether you are leveling your truck or seeking additional clearance for off-road use, these springs provide a precise fit and durable construction.

• Part Number: 53-333377
• Lift Height: 1-inch Rear
• Series: B12 (Special)
• Compatibility: i-Force Engine Only
• Drivetrain: 4WD

Fits 1997-2006 Jeep Wrangler TJ and Wrangler Unlimited LJ models.

Achieve the necessary clearance for larger tires and improved off-road articulation with Synergy Manufacturing front lift springs. These heavy-duty coil springs are engineered to handle the demands of rugged terrain while maintaining controlled ride quality. This specific spring set is designed to provide 5.5 inches of front lift on 2-door TJ models and 4.5 inches of front lift on 4-door configurations, accounting for varying vehicle weights and equipment loads.

• Direct-fit replacement for factory front coil springs
• Provides 5.5 inches of lift for 2-Door models
• Provides 4.5 inches of lift for 4-Door models
• Durable finish to resist corrosion and trail debris
• Manufacturer Part Number: 8063-45

Fits 2007-2024 Jeep Wrangler JK, JKU, JL, and JLU models.

The Synergy 1.750-inch Front Coil Spring Spacer provides a reliable way to lift the front of your Jeep without replacing the entire suspension. This spacer is an ideal solution for leveling the vehicle's stance, especially when compensating for the added weight of an aftermarket front bumper or winch. By retaining the factory coil springs, you maintain OE ride quality while gaining the necessary clearance for larger tire fitment or improved approach angles on the trail.

• Lift Height: 1.750 inches
• Position: Front
• Replaces or stacks with factory isolators depending on desired height and model requirements
• Maintains factory spring rates and ride comfort
• Durable construction designed to withstand off-road articulation and compression
• Manufacturer Part Number: 8017-175

Fits 1996-2000 Honda Civic (CX, DX, EX, GX, HX, LX, Si, and Value Package).

Skunk2 Sport Shocks are engineered as a high-performance factory replacement for enthusiasts looking to improve handling without sacrificing reliability. Utilizing technologies derived from the Pro-C and Pro-S II coilover lines, these shocks feature a dual-tube design with a hardened, chrome-plated, and super-finished shaft. Specifically designed for lowered vehicles, the shortened shock bodies and reduced shaft strokes help maintain essential suspension travel, preventing the bottoming-out issues often found when using OE-length shocks with lowering springs.

• Dual-tube design for consistent damping and smooth operation
• Shortened shock body and reduced shaft stroke to maintain travel on lowered vehicles
• Hardened, super-finished chrome shaft for maximum seal life and durability
• Polyurethane top hat bushings for improved road feedback and response
• Fixed damping rates optimized for Skunk2 Lowering Springs or sleeve-style coilovers
• Full set of four shocks (front and rear)
• Manufacturer Part Number: 541-05-1220

Fits select 1992-1997 Honda Accord, Civic, Civic del Sol, and Prelude models. These Skunk2 Sport Shocks are engineered as a high-performance factory replacement for enthusiasts running lowered suspension setups.

By utilizing a dual-tube design and shortened shock bodies, these shocks provide the necessary suspension travel that standard length dampers lack when paired with lowering springs or adjustable sleeve coilovers. Each unit features a hardened, chrome-plated, and super-finished shaft to ensure smooth operation and long-term reliability. Precision valving, dialed in by Skunk2 suspension engineers, balances handling performance with ride comfort. Included polyurethane top hat bushings improve feedback and response, making these a cost-effective solution for improving vehicle balance and control.

• Shortened shock body and reduced shaft stroke to maintain full travel on lowered vehicles
• Dual-tube design for durability and consistent performance
• Hardened, super-finished chrome-plated shaft
• Fixed damping rates optimized for Skunk2 Lowering Springs
• Polyurethane top hat bushings for enhanced road feedback
• Complete set of four shocks
• Manufacturer Part Number: 541-05-1210

Fits 1988-1991 Honda Civic and CRX models (Base, DX, EX, LX, Si, HF).

Skunk2 Sport Shocks are high-performance factory-replacement dampers designed for the EF-chassis Honda Civic and CRX. Unlike standard replacement shocks, these units feature shortened shock bodies and reduced shaft strokes. This configuration is specifically engineered to maintain adequate suspension travel on lowered vehicles, preventing the bottoming out and harshness often associated with using lowering springs or adjustable sleeve coilovers on factory-length shocks.

Built for durability and consistent performance, these shocks utilize a dual-tube design with a hardened, super-finished chrome-plated shaft. To improve driver feedback and response, Skunk2 includes polyurethane top hat bushings that outperform standard OE rubber. The fixed dampening is precision-valved by Skunk2 engineers to complement performance lowering springs for a balanced, controlled ride.

• Manufacturer Part Number: 541-05-1200
• Quantity: Complete set of 4 shocks
• Construction: Dual-tube design
• Finish: Hardened, chrome-plated, super-finished shaft
• Compatibility: Optimized for lowered ride heights
• Bushings: High-durometer polyurethane top hat bushings included
• Valving: Fixed dampening for improved handling and balance

Fits 2004-2012 Chevrolet Colorado and GMC Canyon models.

The Rust Buster RB7503R Rearward Leaf Spring Mount is designed to replace a compromised or corroded factory mount on the passenger (right) side of the frame. On these vehicles, the leaf spring mounting points are prone to heavy oxidation from road salt and moisture trapment. This replacement component provides a structural solution to restore the integrity of the rear suspension system and maintain proper axle alignment.

• Precision-engineered for the rearward position on the right (passenger) side
• Designed to match OE geometry for a reliable repair
• Restores safety and structural support to the rear leaf spring assembly
• Manufacturer Part Number: RB7503R

Fits select 2013-2025 Subaru BRZ, Toyota 86, Toyota GR86, and Scion FR-S models.

The Pedders EziFit SportsRyder strut assembly is a precision-engineered suspension solution designed for the driving enthusiast. By combining a nitrogen gas-pressurized twin-tube shock with a matched SportsRyder lowering spring, this kit eliminates the guesswork of suspension tuning. This unit comes fully assembled, allowing for a straightforward bolt-on installation that replaces the worn OE components without the need for a spring compressor.

Designed to provide an ideal balance between daily-driver civility and performance handling, this assembly lowers the vehicle by approximately 25mm for a more aggressive stance and a lower center of gravity. To ensure proper alignment geometry after lowering, Pedders includes a factory-style upper camber bolt and the PED-580096 adjustment kit for expanded camber and caster control.

• Part Number: PED-909148R
• Position: Front Right
• Shock Type: 25mm Twin Tube Nitrogen Gas Charged
• Lowering: 25mm (approximate)
• Fully assembled with top mount, spring, and shock
• Includes PED-580096 for additional camber/caster adjustment
• Factory-style upper camber bolt included for precise alignment

Fits 2005-2014 Ford Mustang models, including Base, GT, Boss 302, Bullitt, and Shelby GT500/GT500KR.

The Pedders EziFit SportsRyder Spring and Shock Kit is a comprehensive suspension solution designed to eliminate the guesswork of component matching. This kit replaces worn factory struts and springs with performance-tuned SportsRyder gas-charged dampers and lowered coil springs. Developed to provide an ideal balance between daily-driver civility and aggressive handling, this kit lowers the vehicle approximately 25mm for a more athletic stance and reduced center of gravity.

Built for the enthusiast, these units come fully assembled with heavy-duty GT500-style strut mounts. This pre-assembled design significantly reduces installation time and eliminates the danger of using a spring compressor. Each component is engineered to correct OE suspension weaknesses, ensuring a quiet, comfortable ride with dramatically improved cornering response.

• Manufacturer Part Number: PED-909031
• Lowering Height: 25mm drop from factory height
• Installation: Fully assembled for direct bolt-on replacement
• Strut Mounts: Includes heavy-duty GT500 style mounts for increased durability
• Tuning: Performance-matched SportsRyder struts and springs
• Includes: Pair of front strut/spring assemblies and pair of rear shocks/springs (where applicable)

Fits 2005-2014 Ford Mustang models including Base, GT, Boss 302, Bullitt, and Shelby GT500.

The Pedders EziFit SportsRyder Rear Spring and Shock Kit (PED-902222) is an engineered suspension solution designed to correct the inherent weaknesses in the factory OE setup. By replacing worn components with performance-matched shocks and springs, this kit delivers the ideal balance between daily-driver civility and performance handling, often described as a "factory hot rod" feel.

This kit is specifically developed for the enthusiast driver, offering a direct-fit replacement that improves cornering stability and reduces body roll. The included SportsRyder springs provide a consistent 25mm drop in the rear, lowering the center of gravity while maintaining a comfortable, quiet ride without the harshness associated with dedicated race setups.

• Performance-matched shocks and springs for optimized damping control
• Lowers the rear ride height by 25mm for improved stance and handling
• Identifies and corrects weaknesses in the original factory suspension
• Direct-fit components ensure a straightforward installation
• Designed for the enthusiast driver seeking performance and comfort
• Manufacturer Part Number: PED-902222