The Whiteline KLC30 Front Sway Bar Link Conversion Kit is engineered to eliminate the flex and compliance inherent in factory original equipment. By replacing standard links with high-tensile extruded alloy units, this kit provides more direct roll control and faster sway bar engagement. This results in up to 25% more effective bar rate at lower wheel deflection points, significantly improving steering response during initial turn-in and rapid lane changes.

Fits select 1990-2007 Subaru Impreza, Legacy, Outback, and Forester, as well as 2005-2006 Saab 9-2X models.

• Precision Handling: Eliminates bushing flex to ensure the sway bar acts more directly under vertical loads without sacrificing suspension travel.
• High-Strength Construction: Manufactured from extruded alloy with ultra-low compliance synthetic elastomer bushings for maximum durability.
• Corrosion Protection: Features a combination of protective plating and powder coating to resist rust and withstand harsh environmental conditions.
• Complete Hardware: Includes high-tensile mounting hardware and molybdenum disulphide (LM) grease for a quiet, long-lasting installation.
• Specifications: Kit includes alloy links, synthetic elastomer bushings, installation guide, and mounting hardware.

Manufacturer Part Number: KLC30

Fits 2016-2026 Honda Civic models, including LX, EX, Sport, Si, and Type R.

The Whiteline KLC265 adjustable sway bar vehicle link kit is engineered to eliminate sway bar preload and optimize suspension geometry. When a vehicle is lowered or modified with aftermarket sway bars, factory-length end links can often bind or hold the bar in a pre-loaded state, which negatively impacts cornering balance and handling predictability. These adjustable links allow you to reset the bar to a neutral position, ensuring that the sway bar only engages when the chassis rolls.

Constructed from high-strength materials with a corrosion-resistant finish, these links are designed to withstand the high lateral loads of spirited driving and track use. They provide the precise adjustment needed to maintain maximum tire contact and sharper steering response.

• Manufacturer Part Number: KLC265
• Heavy-duty construction for increased durability and stiffness
• Adjustable length to accommodate various ride heights and sway bar diameters
• Helps eliminate sway bar preload for more consistent handling
• Corrosion-resistant coating for long-term reliability
• Direct replacement for OEM links

Fits 2013-2020 Subaru BRZ, Toyota 86, and Scion FR-S (Base, GT, TS, and Limited submodels).

The Whiteline KLC264 Adjustable Sway Bar Vehicle Link Kit is an essential upgrade for drivers looking to optimize suspension geometry. By allowing for precise length adjustment, these links enable you to eliminate sway bar preload—a common issue when vehicles are lowered—ensuring the bar only engages when cornering. This results in sharper steering response, reduced body roll, and more predictable handling characteristics during spirited driving or track use.

Engineered for durability, these links are constructed from high-strength materials and feature a corrosion-resistant finish to withstand harsh road conditions. Whether you are running an OEM setup or upgraded adjustable sway bars, this kit provides the adjustability needed to dial in your chassis for maximum performance.

• Manufacturer Part Number: KLC264
• Kit includes front and rear adjustable end links
• Corrects sway bar geometry on lowered vehicles
• Eliminates sway bar preload for neutral handling
• High-strength construction with corrosion-resistant coating
• Direct replacement for factory hardware

Fits select 2018-2025 Honda Accord models including Hybrid, LX, Sport, and Touring trims.

The Whiteline KLC252 adjustable sway bar link kit is engineered to maximize suspension performance by eliminating sway bar preload. On many vehicles, especially those with lowered ride heights or aftermarket sway bars, standard fixed-length links can cause binding or preload that hinders handling. These Whiteline links feature a window of adjustability, allowing for neutral suspension geometry and immediate sway bar response for improved mechanical grip and more predictable cornering.

• High-spec, lightweight componentry for reduced unsprung weight
• Adjustable design allows for precise elimination of sway bar preload
• Optimizes sway bar effectiveness for better handling and grip
• Direct replacement for worn or inadequate factory mounts and links
• Manufacturer Part Number: KLC252

Fits 2022-2026 Hyundai Elantra N Base models.

Maximize the effectiveness of your suspension system with the Whiteline KLC249 Rear Adjustable Sway Bar Link Kit. While a larger sway bar is a common upgrade, its performance is often hindered by worn or non-adjustable factory end links. These Whiteline links are engineered to eliminate sway bar preload upon installation, ensuring the bar provides maximum output for improved mechanical grip and flatter cornering.

Constructed with high-spec, lightweight componentry, these links provide the adjustability required to fine-tune your chassis setup. Whether you are correcting geometry on a lowered vehicle or simply replacing inadequate factory hardware, these links offer the durability and precision needed for consistent performance under load.

• Zero Preload: Fully adjustable design allows you to eliminate sway bar preload for a neutral chassis balance.
• Maximum Efficiency: Ensures your rear sway bar reacts immediately to cornering forces.
• High-Spec Build: Features durable, lightweight materials designed for long-term reliability in performance applications.
• Direct Fit: Specifically engineered for the CN7 chassis Elantra N for a straightforward installation.
• Part Number: KLC249

Fits select 2009-2024 Toyota 4Runner and 2010-2023 Lexus GX460 models. Correct your suspension geometry and optimize sway bar performance with the Whiteline KLC247 Sway Bar Link Drop Kit.

When vehicles are lifted or modified, the factory sway bar angle often shifts, leading to unwanted preload and reduced effectiveness. This drop kit is engineered to restore the sway bar to a neutral position, eliminating preload and ensuring that the bar can respond effectively to cornering forces. By improving the load distribution across the chassis, this kit helps reduce body roll and provides a more stable, predictable handling experience during both on-road driving and off-road excursions.

• Restores sway bar geometry to maximize grip and cornering stability
• Eliminates sway bar preload caused by suspension height changes
• Lightweight, high-strength components designed for long-term durability
• Complete hardware kit for straightforward installation
• Manufacturer Part Number: KLC247

Kit Contains: 4 Bushings, 2 Spacers, 4 Bolts.

Fits 2012-2021 Nissan GT-R models (including Premium, Black Edition, Nismo, Track Edition, Pure, and 50th Anniversary).

Whiteline adjustable sway bar links are engineered to maximize the effectiveness of your Nissan GT-R's front anti-roll system. Factory links can often become a weak point, particularly on lowered vehicles where non-adjustable components create sway bar preload. The Whiteline KLC245 kit allows for precise length adjustment to eliminate this preload upon installation, ensuring the sway bar provides immediate and consistent output for improved grip and handling.

Constructed from high-strength, lightweight anodized alloy, these links offer superior rigidity over OEM parts. By eliminating the flex associated with stock components, this kit improves turn-in response and chassis stability during high-speed lane changes and cornering. The heavy-duty ball joints are designed to rotate and adjust to any angular combination for optimal alignment and ease of fitment.

• Manufacturer Part Number: KLC245
• Position: Front
• Material: Anodized premium alloy for corrosion resistance
• Hardware: Heavy-duty ball joints and 8 washers included
• Adjustment: On-car adjustable to eliminate sway bar preload
• Kit Contents: Pair of 2 link assemblies and necessary hardware

Fits select 2005-2015 Chrysler 300, Dodge Challenger, Charger, and Magnum.

Sway bar effectiveness is often compromised by worn factory mounts or inadequate drop links. The Whiteline KLC244 adjustable sway bar link kit is engineered to restore and enhance suspension performance. These links feature high-spec, lightweight components designed to withstand the loads of performance driving while offering a necessary window of adjustability. By allowing you to eliminate sway bar preload during installation, this kit ensures your sway bar delivers maximum output for improved grip and flatter cornering.

The durable construction is built to maintain alignment and handling precision across varied road conditions, reducing body roll and providing a more confident driving experience. Whether you are replacing worn OE bushings or optimizing a lowered suspension setup, these links provide the mechanical connection needed for effective stabilizer bar performance.

• Eliminates sway bar preload for neutral handling
• Lightweight, high-strength componentry
• Reduces body roll and improves turn-in response
• Durable finish for long-term performance
• Manufacturer Part Number: KLC244

Kit Includes:

• 2 Adjustable Links
• 4 Bushings
• 2 Mounting Bolts
• 8 Washers
• 2 Nuts

Fits select 2005-2019 Audi and Volkswagen models including A3, Q3, TT, Beetle, CC, Eos, Golf, GTI, Jetta, Passat, Rabbit, and Tiguan (2.0T).

Standard factory end links are often the weak link in a performance suspension setup. These Whiteline adjustable sway bar links are engineered to replace worn or flexible OE components, allowing you to eliminate sway bar preload after lowering your vehicle. By restoring a neutral bar position at ride height, you ensure the sway bar can deliver its full potential for improved lateral grip and steering response.

Constructed from premium anodized alloy, these links provide superior corrosion resistance and durability. The heavy-duty steel ball joint ends allow for rotation through any necessary angle to accommodate various suspension geometries, while the on-car adjustment feature simplifies the tuning process.

• Part Number: KLC243
• Provides up to 25mm of center-to-center length adjustment
• High-strength anodized aluminum alloy bodies
• Heavy-duty steel ball joints for maximum durability
• Eliminates sway bar preload for better handling balance
• Includes all necessary hardware and installation guide

Fits select 2016-2026 Lexus (ES300h, ES350, UX200, UX250h) and Toyota (Avalon, C-HR, Camry, Corolla, Corolla Cross, GR Corolla, Prius, Prius Prime) models.

Whiteline adjustable sway bar endlinks are engineered to resolve the common issue of sway bar preload, which occurs when factory or fixed-length links are used on vehicles with altered ride heights or uneven corner weights. By utilizing a window of adjustability, these links allow you to neutralize the sway bar at rest, ensuring that the bar only engages during cornering for maximum predictable grip and improved handling response.

Constructed with high-quality, lightweight componentry, these links are designed to replace worn or inadequate factory mounts that often hinder sway bar effectiveness. These heavy-duty links provide a direct connection between the sway bar and the control arm, minimizing deflection and maintaining suspension geometry under load.

• Manufacturer Part Number: KLC242
• Part Type: Rear Sway Bar Endlink
• Quantity: Pair (Set of 2)
• Eliminates sway bar preload for consistent handling
• Improves sway bar output and lateral grip
• Designed for easy installation and precise adjustment

Fits 2003-2009 Lexus GX470 and 2003-2024 Toyota 4Runner.

Suspension lift kits often compromise sway bar effectiveness by pushing the factory links beyond their intended range of motion. The Whiteline KLC239 Adjustable Sway Bar Link Kit is specifically engineered for lifted applications, providing a necessary window of adjustability to eliminate sway bar preload. By restoring neutral geometry, these links ensure your sway bar delivers maximum performance for improved mechanical grip and more predictable handling.

Constructed with top-tier, lightweight componentry, these links are built to handle the increased loads of modified suspension systems. This kit provides a heavy-duty replacement for worn or inadequate OE mounts, ensuring your sway bar maintains its functional integrity on and off the road.

• Manufacturer Part Number: KLC239
• Optimized for lifted suspension applications
• Adjustable design eliminates sway bar preload for neutral handling
• Restores proper sway bar geometry and improves lateral grip
• Precision-engineered lightweight components for durability
• Includes: Pair of (2) adjustable sway bar links and hardware

Fits select 2012-2021 BMW 1 Series, 2 Series, 3 Series, 4 Series, M2, M3, M4, and X1.

Whiteline KLC233 adjustable sway bar end links are engineered to maximize the effectiveness of your vehicle's sway bar system. Factory end links are often a weak point, particularly when upgrading to stiffer aftermarket sway bars or lowering the vehicle. These adjustable links allow you to eliminate sway bar preload during installation, which is essential for maintaining neutral handling and ensuring the suspension performs predictably on both the street and track.

Constructed from high-quality, lightweight components, this kit provides the durability required for high-load cornering while offering a precise window of adjustability. By centering the sway bar and removing tension caused by ride height changes or chassis variances, you achieve more effective load distribution and improved mechanical grip.

• Eliminates sway bar preload for consistent handling
• Lightweight, heavy-duty construction for long-term durability
• Essential for lowered vehicles and corner balancing
• Includes all necessary mounting hardware
• Manufacturer Part Number: KLC233

Fits 2014-2024 Mini Cooper Base, S, John Cooper Works, JCW GP, and SE models.

Maximize the effectiveness of your suspension with the Whiteline KLC232 Adjustable Sway Bar Link Kit. Original equipment sway bar links are often a weak point, prone to flex and wear that hinders the sway bar's ability to control body roll. These heavy-duty links are engineered to replace worn or inadequate factory mounts with high-strength, lightweight componentry. The adjustable design allows you to eliminate sway bar preload on installation—a critical step for vehicles with altered ride heights—ensuring the sway bar provides immediate, symmetrical response for improved grip and sharper turn-in.

• Precision Engineering: Heavy-duty ball joints adjust and rotate to any angular combination for optimum alignment and binding-free operation.
• Premium Construction: Lightweight alloy tubes feature a protective anodized finish for long-lasting resistance against corrosion and road grime.
• Enhanced Responsiveness: Eliminates the flex associated with OE links to increase rigidity during lane changes and initial cornering.
• Complete Kit: Includes 2 Links, 2 Tubes, 2 Spacers, 4 Washers, 6 Nuts, and Grease.
• MPN: KLC232

Fits select 2007-2026 Subaru (Impreza, WRX, STI, BRZ, Forester, Legacy, Outback, XV Crosstrek), Scion FR-S, and Toyota 86/GR86.

The Whiteline KLC231 Rear Fixed Sway Bar End Link Kit is engineered to eliminate the flex and delay associated with original equipment links. By replacing soft factory components with high-tensile extruded alloy links and ultra-low compliance synthetic elastomer bushings, this kit allows the sway bar to act more directly under vertical loads. This quickens the effect of the sway bar, providing up to 25% more effective bar rate earlier in the suspension travel for sharper turn-in and improved roll control during aggressive lane changes.

Built to withstand harsh environments, every metal component features protective plating and premium anodized finishes for superior corrosion resistance. The heavy-duty fixed-length design maintains correct sway bar geometry while allowing maximum articulation to ensure full suspension travel is preserved. Installation is a straightforward process that typically takes one hour and uses provided high-tensile hardware and molybdenum disulphide (LM) grease for long-term reliability.

• Part Number: KLC231
• Material: High-tensile extruded alloy
• Bushing Type: Ultra-low compliance synthetic elastomer
• Finish: Anodized alloy with protective plating
• Includes: High-tensile hardware and extreme pressure LM grease
• Installation: 1-hour estimated time; install guide included
• Warranty: 3-year / 60,000-mile manufacturer warranty

Fits select 2003-2025 Toyota 4Runner, Tacoma, and FJ Cruiser, and Lexus GX460 and GX470.

Replace worn, bent, or over-compliant factory components with the Whiteline KLC220 front adjustable heavy-duty sway bar link kit. These links are engineered to eliminate the flex associated with original equipment, providing increased rigidity and a sharper turn-in response that is especially noticeable during lane changes and initial cornering. By allowing for on-car length adjustment, these links enable you to eliminate sway bar preload—a critical factor for maintaining balanced handling on vehicles with modified ride heights.

Constructed from high-quality anodized alloy, this kit features heavy-duty steel ball joints designed to withstand the stresses of both spirited driving and off-road conditions. All metal components are finished with a protective plating that acts as a hard skin, offering significantly better corrosion resistance than conventional paint.

• On-car length adjustment allows for precise tuning and elimination of sway bar preload.
• High-strength steel ball joints ensure steering predictability and long-term durability.
• Anodized alloy center bodies provide a lightweight yet high-strength barrier against wear.
• Corrosion-resistant protective plating withstands harsh environmental conditions.
• Designed to rotate to any angular combination for ease of fitment.
• Includes installation guide and all necessary hardware.
• Manufacturer Part Number: KLC220

Fits 2013-2026 Subaru BRZ, Toyota 86/GR86, and Scion FR-S.

Whiteline adjustable sway bar links are engineered to maximize the efficiency of your anti-roll bar by eliminating the flex and compliance associated with standard original equipment. These high-strength links are essential for performance-oriented drivers who need to maintain suspension geometry under load, providing increased rigidity and a more direct steering response during initial turn-in and rapid lane changes.

The KLC219 kit features a window of adjustability that allows for precise on-car length tuning. This capability is critical for eliminating sway bar preload—ensuring the sway bar only acts when the vehicle begins to roll rather than being under tension while at rest. Built to withstand harsh conditions, the links utilize premium anodized alloy materials and heavy-duty steel ball joints for maximum durability and steering predictability.

• Manufacturer Part Number: KLC219
• Location: Front
• Construction: High-quality anodized alloy with heavy-duty steel ball joints
• Adjustment: On-car length adjustable to eliminate preload
• Finish: Protective plating and anodized coating for superior corrosion resistance
• Includes: Pair of links with all necessary mounting hardware

Fits select 2016-2026 Honda Civic, Accord, CR-V, HR-V, Insight, and Acura Integra models.

Maximize the efficiency of your suspension setup with the Whiteline KLC217 adjustable sway bar end links. Original equipment or fixed-length aftermarket links often introduce sway bar preload, which can cause unpredictable handling and uneven corner weights, especially on lowered vehicles. These high-strength adjustable links allow you to neutralize preload during installation, ensuring your sway bar provides maximum output for improved grip and responsiveness.

Engineered for durability under high cornering loads, these links feature premium anodized alloy bodies that provide a long-lasting barrier against corrosion. The heavy-duty steel ball joints are designed to rotate through any necessary angular combination, delivering smooth suspension articulation without the flex associated with factory components.

• Eliminates sway bar preload for consistent handling and improved turn-in response
• Constructed from high-quality anodized alloy for superior corrosion resistance
• Heavy-duty steel ball joint ends for maximum strength and durability
• Adjustable length design accommodates varied ride heights and suspension geometries
• Includes all necessary hardware for installation
• Manufacturer Part Number: KLC217

Fits select 2016-2025 Mazda MX-5 Miata and 2017-2020 Fiat 124 Spider models.

Whiteline adjustable sway bar links are engineered to maximize the effectiveness of your vehicle's anti-roll system by eliminating the preload and flex common with original equipment components. When a vehicle is lowered or fitted with aftermarket suspension, factory end links often bind or hold the sway bar at an improper angle. These Whiteline KLC205 links allow for precise length adjustment, ensuring the sway bar remains neutral at ride height for improved turn-in response and predictable handling during high-speed cornering.

Constructed from lightweight, high-tensile anodized alloy, these links feature heavy-duty steel ball joints designed to rotate to any angular combination. This robust design provides a long-lasting barrier against corrosion and wear while delivering the rigidity necessary for spirited driving and track conditions.

• Adjustable design eliminates sway bar preload on installation
• High-strength anodized alloy bodies for superior durability and corrosion resistance
• Heavy-duty steel ball joint ends ensure maximum strength and articulation
• Improves steering response and chassis rigidity by eliminating link flex
• Includes detailed installation guide and articulation voids for proper suspension movement
• Manufacturer Part Number: KLC205

Fits 2008-2013 Infiniti G37, 2009-2020 Nissan 370Z, and 2023-2025 Nissan Z.

The Whiteline KLC204 Front Adjustable Ball End Sway Bar Link Kit is engineered to maximize the efficiency of your sway bar by eliminating flex and neutralizing preload. On vehicles with lowered suspension, standard-length end links often force the sway bar into a preloaded state, which negatively impacts handling balance and grip. These high-strength adjustable links allow you to reset the sway bar geometry to a neutral position, ensuring maximum output and predictable turn-in response.

Constructed from lightweight, premium-grade anodized alloy, these links are built to resist corrosion while providing the rigidity needed for high-load cornering. The heavy-duty steel ball joint ends are designed to rotate through any required angular combination, facilitating ease of fitment and smooth suspension articulation without binding under load.

• Eliminates sway bar preload for optimized handling and grip
• Adjustable center body allows for precise suspension geometry tuning
• High-strength anodized alloy construction for weight savings and corrosion resistance
• Heavy-duty steel ball joints provide maximum durability and load capacity
• Articulation voids ensure necessary suspension travel under load
• Includes all necessary hardware and detailed installation guide
• Manufacturer Part Number: KLC204

Fits 1990-1997 Mazda Miata (Base, LE, M Edition, SE, and STO).

Correct your suspension geometry and eliminate sway bar preload with Whiteline KLC203 adjustable front sway bar links. Designed specifically for the NA Miata, these links replace the flexible original equipment with high-strength components to ensure maximum sway bar effectiveness. By allowing for on-car length adjustment, these links enable precise chassis tuning—critical for corner balancing or after lowering your vehicle—to improve turn-in response and lateral stability during lane changes.

Constructed from premium anodized alloy and heavy-duty steel, these links feature high-quality ball joints that rotate to accommodate any angular alignment. The synthetic elastomer bushings are formulated to resist oil, grease, ozone, and weathering, ensuring consistent performance in harsh track or street environments.

• Part Number: KLC203
• Adjustment Range: Up to 25mm center-to-center length adjustment
• Construction: High-strength anodized alloy with heavy-duty steel ball joint ends
• Bushing Material: Protective synthetic elastomer for oil and ozone resistance
• Finish: Protective plating and anodizing for superior corrosion resistance
• Installation: Includes detailed install guide; provides on-car adjustability to eliminate preload

Fits select 2013-2026 Audi A3, S3, RS3, TT and Volkswagen Golf, GTI, Golf R, Passat, and Tiguan models.

Whiteline KLC202 adjustable sway bar links are engineered to maximize the effectiveness of your vehicle's anti-roll system. Factory or non-adjustable aftermarket links often introduce sway bar preload, which can cause unpredictable handling. These high-strength links allow for precise length adjustment to eliminate preload on installation, ensuring the sway bar provides maximum output for improved grip and chassis responsiveness.

Constructed from high-quality alloy with heavy-duty steel ball joint ends, these links eliminate the flex associated with original equipment. The ball joints are designed to adjust and rotate to any angular combination, facilitating ease of fitment while maintaining necessary suspension articulation under load. All metal components feature protective plating and powder coating to resist corrosion in the harshest driving conditions.

• Part Number: KLC202
• Material: High-strength alloy with heavy-duty steel ball joints
• Adjustable design eliminates sway bar preload for neutral handling
• Includes extreme pressure molybdenum disulphide (LM) grease for extended joint life
• Corrosion-resistant protective plating and powder coating
• Articulation voids provided for suspension compression under load
• Detailed installation guide included

Fits select 2010-2020 Chevrolet Camaro, Genesis G80, and Hyundai Genesis / Genesis Coupe (2.0T).

Whiteline heavy-duty adjustable front sway bar links are engineered to eliminate sway bar preload and significantly improve suspension responsiveness. By replacing soft or worn original equipment links with these high-strength components, you eliminate the flex that dulls handling, resulting in increased rigidity and sharper turn-in performance during cornering and lane changes.

The KLC201 links feature lightweight aluminum bodies and heavy-duty steel ball joints that adjust and rotate to any angular combination. This design allows for precise on-car length adjustment to ensure your sway bar is properly indexed, especially on vehicles with modified ride heights.

• Precision Adjustment: Features up to 25mm center-to-center length adjustment (including 15mm adjustment bodies) to eliminate preload.
• Premium Materials: Manufactured from high-quality anodized alloy for a long-lasting protective barrier against corrosion and wear.
• Heavy-Duty Ball Joints: High-strength steel ball joint ends ensure maximum durability and reliable performance under high loads.
• Corrosion Protection: Metal components feature protective plating tougher than conventional paint to withstand harsh road conditions.
• Installation: Includes a detailed install guide; designed for ease of fitment with standard hand tools.
• Manufacturer Part Number: KLC201

Fits select 2008-2025 Subaru Forester, Outback, Crosstrek, and XV Crosstrek. These Whiteline adjustable sway bar links are engineered to replace worn or flexible original equipment mounts that hinder stabilizer bar effectiveness. By eliminating the flex associated with OE components, the KLC200 links increase suspension rigidity and responsiveness, providing more immediate feedback during turn-in and high-speed lane changes.

The Whiteline KLC200 assembly features a high-strength alloy body combined with heavy-duty steel ball joints that rotate to any angular combination for bind-free operation. The primary advantage of these links is the ability to eliminate sway bar preload during installation, which is critical for vehicles with altered ride heights. With up to 25mm of center-to-center length adjustment available on-car, you can fine-tune your suspension geometry for maximum grip and neutral handling.

• Part Number: KLC200
• Adjustment Range: 25mm center-to-center
• Material: High-quality alloy with heavy-duty steel ball joint ends
• Finish: Protective plating and powder coating for superior corrosion resistance
• Includes: Pair of link assemblies, install guide, and molybdenum disulphide (LM) grease
• Benefit: Eliminates sway bar preload and improves suspension response

Fits select 2015-2026 Ford Mustang and 2016-2018 Ford Focus models.

The Whiteline KLC198 adjustable sway bar link assembly is engineered to restore and enhance sway bar effectiveness by replacing flexible or worn factory links. By eliminating the flex associated with original equipment components, these high-strength links increase rigidity and responsiveness, providing more immediate handling during turn-in and high-speed lane changes. These links allow for precise on-car adjustment to eliminate sway bar preload after altering ride height, ensuring your suspension maintains maximum grip and performance under load.

• Adjustability: Provides up to 25mm center-to-center length adjustment while installed on the vehicle to eliminate preload.
• Durable Construction: Manufactured from high-strength alloy with heavy-duty steel ball joint ends for maximum durability and longevity.
• Corrosion Resistance: Protective plating on all metal components acts as a hard skin to withstand harsh environments.
• Precision Alignment: Heavy-duty ball joints rotate to any angular combination for ease of fitment and optimum geometric performance.
• Manufacturer Part Number: KLC198

Each kit includes an installation guide with detailed instructions to ensure a proper setup for your vehicle's suspension system.

Fits 2012-2018 Ford Focus models, including Electric, S, SE, SEL, ST, and Titanium. This Whiteline heavy-duty rear sway bar link kit (KLC195) is engineered to eliminate the flex and preload common with factory components. By allowing for up to 25mm of on-car length adjustment, these links ensure your rear sway bar remains neutral at static ride height, maximizing mechanical grip and improving turn-in response during spirited driving or lane changes.

• Eliminates sway bar preload for optimized suspension geometry.
• Provides up to 25mm of on-car center-to-center length adjustment.
• Constructed from high-strength alloy with heavy-duty steel ball joint ends for maximum durability.
• Protective plating on all metal components resists corrosion and withstands harsh road conditions.
• Fully articulating ball joints rotate to any angular combination for precise fitment.
• Includes comprehensive installation guide.
• Manufacturer Part Number: KLC195

Fits select 1991-2019 Toyota (Camry, Highlander, Avalon, MR2), Lexus (ES300, RX300), Acura (SLX), Hyundai (Sonata, Elantra), Kia (Optima), Mazda (Protege), and Volvo (S40/V40) models.

Whiteline adjustable sway bar links are engineered to maximize the effectiveness of your sway bar by eliminating flex and preload. These high-strength links replace worn or inadequate factory mounts, restoring suspension rigidity and improving responsiveness during initial turn-in and rapid lane changes. By allowing for on-car length adjustment, these links ensure the sway bar operates at its optimum geometry for improved mechanical grip and more predictable handling.

• Manufactured from high-quality light-weight alloy for maximum strength and durability.
• Includes heavy-duty steel ball joint ends that rotate to any angular combination for ease of fitment.
• Provides a window of adjustability up to 25mm (center-to-center) to eliminate sway bar preload.
• Protective plating on all metal components resists corrosion and withstands harsh road conditions.
• Complete kit includes necessary hardware and installation guide.
• Manufacturer Part Number: KLC187