Fits select 2000-2005 Toyota MR2 Spyder and 2022-2025 Tesla Model S (Base, Long Range, and Plaid).

Maximize the efficiency of your suspension setup with the Whiteline KLC140-215 Heavy Duty Adjustable Sway Bar Link Kit. While often overlooked, factory or worn drop links can compromise sway bar effectiveness through flex or incorrect geometry. These links feature a window of adjustability from 210mm to 235mm, allowing you to eliminate sway bar preload during installation—a critical step for vehicles with altered ride heights or corner-balanced setups.

Built with high-spec, lightweight componentry and heavy-duty ball joints, these links ensure that every bit of body roll is transferred directly to the sway bar for improved grip and more predictable handling. Each kit includes two links with 10mm ball studs, designed to replace weaker OE mounts and provide a direct mechanical connection between the sway bar and the control arm or strut.

• Part Number: KLC140-215
• Adjustment Range: 210mm - 235mm center-to-center
• Ball Stud Diameter: 10mm
• Construction: Heavy-duty adjustable ball joint design
• Quantity: Set of 2 links

The Whiteline Heavy Duty Adjustable Universal Sway Bar Link Kit is engineered to maximize the effectiveness of both OEM and aftermarket sway bars by replacing flexible or worn factory drop links. These links allow for precise length adjustment, which is critical for eliminating sway bar preload—especially on vehicles with modified ride heights—to ensure neutral handling and consistent lateral grip.

Constructed with high-spec, lightweight center sections and robust steel ball joints, these links provide a direct connection between the sway bar and the suspension member. This eliminates the delay in sway bar activation caused by rubber bushing deflection, resulting in sharper turn-in and improved roll control. The 190-215mm adjustment range allows for fine-tuning of the suspension geometry to prevent binding and optimize performance.

• Fits universal applications requiring a 10mm ball stud and 190-215mm length
• Heavy-duty steel ball joints for increased durability and articulation
• 190mm to 215mm adjustable length range to eliminate preload
• Lightweight componentry engineered for high-performance use
• Kit includes a pair of two (2) adjustable links
• Manufacturer Part Number: KLC140-195

Maximize the efficiency of your suspension system with the Whiteline KLC140-175 Heavy Duty Adjustable Sway Bar End Link Kit. Standard or worn factory end links often flex or fail under load, especially after installing stiffer aftermarket sway bars. These Whiteline links are engineered with high-spec, lightweight components designed to withstand increased cornering forces while providing the precision needed for performance driving.

The primary advantage of these adjustable links is the ability to eliminate sway bar preload. By fine-tuning the link length between 175mm and 200mm, you can ensure the sway bar sits in a neutral position at static ride height—critical for vehicles that have been lowered or corner-balanced. This results in more predictable handling, improved mechanical grip, and immediate sway bar activation during cornering.

• Adjustment Range: 175mm - 200mm
• Ball Stud Diameter: 10mm
• Construction: Heavy-duty, low-friction ball joints for longevity and quiet operation
• Hardware: Includes two (2) adjustable links and necessary mounting hardware
• Part Number: KLC140-175

Fits select 2011-2021 BMW 1, 2, 3, and 4 Series models, including M2, M3, and M4. These Whiteline heavy-duty adjustable sway bar links are engineered to replace worn or flexible original equipment mounts and drop links, ensuring your sway bar delivers maximum grip and improved handling.

By utilizing a high-strength anodized alloy center and heavy-duty steel ball joints, these links eliminate the flex common with factory components. The 25mm adjustment window allows you to eliminate sway bar preload during installation, which is critical for maintaining neutral cornering balance, especially on lowered vehicles or those with corner-weighted suspensions. The ball joints feature a wide range of rotation to accommodate various angular fitments and prevent binding during suspension travel.

• Part Number: KLC140-135
• Adjustment Range: 130mm to 155mm (center to center)
• Ball Stud Diameter: 10mm
• Materials: Gold anodized aluminum alloy body with steel ball joint ends
• Adjustability: On-car length adjustment up to 25mm
• Included: Pair of adjustable links and comprehensive installation guide

Restore handling precision and maximize the effectiveness of your suspension with the Whiteline Heavy Duty Adjustable Sway Bar Link Kit. These universal links are engineered to replace worn OE components or inadequate mounts that hinder sway bar performance. By offering a specific window of adjustability, they allow you to eliminate sway bar preload at the ride height of your choice, ensuring immediate bar activation for improved mechanical grip and flatter cornering.

Constructed with high-spec, lightweight componentry and heavy-duty steel ball joints, these links provide a rigid, direct connection between the sway bar and the control arm or strut. The 10mm ball stud design is built to withstand the increased loads of performance driving while maintaining quiet, smooth articulation.

• Adjustment Range: 110mm - 135mm
• Ball Stud Diameter: 10mm
• Heavy-duty steel ball joint design for durability and rigid response
• Eliminates sway bar preload on installation
• Manufacturer Part Number: KLC140-115

Kit Includes: Two (2) adjustable sway bar links and necessary mounting hardware.

Ensure your vehicle's suspension performs at its peak with the Whiteline Universal Heavy Duty Adjustable Sway Bar Link Kit. Factory end links are often the weak link in a suspension system; worn or flexible mounts can hinder sway bar effectiveness, leading to sluggish handling. This KLC140-090 kit is engineered to eliminate sway bar preload during installation, ensuring the stabilizer bar can provide maximum output for improved mechanical grip and cornering response.

Constructed from high-grade, lightweight components, these links feature robust adjustable ball joints designed to withstand the increased loads of performance driving. The adjustable design allows for precise length tuning, making them an essential upgrade for vehicles with modified ride heights or those undergoing corner balancing. By maintaining neutral geometry, these links ensure your sway bar engages exactly when it should without binding.

• Eliminates sway bar preload for optimized suspension geometry and handling
• Heavy-duty adjustable ball joints provide superior durability over OEM plastic or thin-gauge links
• High-strength, lightweight componentry for reduced unsprung weight
• Improves sway bar effectiveness for better lateral stability and grip
• Includes two (2) adjustable link assemblies
• Manufacturer Part Number: KLC140-090

Fits select 1992-2025 vehicles from Subaru, Honda, Mazda, Mitsubishi, Acura, Toyota, Lexus, and Fiat. This Whiteline adjustable front sway bar link kit is designed to maximize the effectiveness of your sway bar by eliminating the flex common in original equipment links.

By utilizing high-strength, lightweight anodized alloy componentry and heavy-duty steel ball joints, these links provide increased rigidity and immediate responsiveness during lane changes and initial turn-in. The adjustable design allows you to eliminate sway bar preload upon installation, which is essential for lowered vehicles or performance tuning to ensure neutral handling. The heavy-duty ball joints are engineered to rotate to any required angular combination for a bind-free fitment and optimum suspension articulation.

• Eliminates sway bar preload for consistent handling characteristics
• Premium anodized alloy materials for superior corrosion resistance
• Heavy-duty steel ball joints for maximum durability and strength
• Includes all necessary hardware and installation guide
• Estimated installation time: 1 hour
• Manufacturer Part Number: KLC139
• 3-year / 60,000-mile warranty

Fits select 1997-2019 Chevrolet Corvette, 2003-2009 Nissan 350Z, and 2003-2007 Infiniti G35 models.

Whiteline KLC110 Heavy Duty Adjustable Sway Bar Links are engineered to eliminate the flex and preload issues common with worn original equipment end links. By providing a direct, high-strength connection between the sway bar and the control arm, these links ensure maximum stabilizer bar effectiveness for improved grip, reduced body roll, and sharper steering response during initial turn-in and high-speed maneuvers.

Constructed from premium anodized alloy, these links feature heavy-duty steel ball joint ends designed to rotate to any angular combination, simplifying fitment even on modified suspension setups. The center-to-center length is adjustable by up to 25mm while on the car, allowing for precise chassis tuning and the removal of sway bar preload—crucial for vehicles with lowered ride heights or specialized corner-weighting.

• Manufacturer Part Number: KLC110
• Adjustment Range: 25mm center-to-center window
• Materials: Anodized alloy bodies with heavy-duty steel ball joints
• Design: High-strength, low-weight componentry to eliminate OE flex
• Installation: Includes detailed installation guide and necessary hardware

Fits select 1984-1998 Nissan 200SX and 240SX models.

Maximize the efficiency of your suspension with the Whiteline KLC109 Rear Adjustable Sway Bar Link Kit. Designed to replace worn or flexible OE links, these high-strength components allow you to eliminate sway bar preload during installation. This is particularly critical for vehicles with modified ride heights, ensuring the sway bar can deliver immediate, consistent torsional resistance for improved grip and handling.

• MPN: KLC109
• Materials: Premium anodized alloy bodies for superior corrosion resistance and weight reduction.
• Heavy-Duty Joints: Steel ball joint ends provide maximum strength and durability under high lateral loads.
• Angular Adjustability: Ball joints rotate to any necessary angle for optimal fitment and articulation.
• Performance Benefit: Increases rigidity and responsiveness during initial turn-in and high-speed lane changes.
• Contents: Includes a pair of adjustable links and a detailed installation guide.

Fits 1984-1998 Nissan 200SX and 240SX (including Base, SE, SE-R, Turbo, XE, and LE models).

Correcting suspension geometry is critical for performance, yet many enthusiasts overlook the impact of worn or fixed-length OE end links. The Whiteline KLC107 front adjustable sway bar link kit is engineered to eliminate sway bar preload, which often occurs after lowering a vehicle or during corner weighting. By neutralizing this tension at rest, you ensure the sway bar delivers maximum output for improved lateral grip and immediate turn-in response.

These high-strength links replace flexible factory components with premium anodized alloy materials and heavy-duty steel ball joints. The adjustable design allows for precise rotation to accommodate various angular combinations, while articulation voids ensure the suspension can compress fully under load without binding. These links provide the rigidity needed for high-speed lane changes and aggressive cornering while maintaining the durability required for long-term use.

• Adjustable Design: Eliminates sway bar preload for balanced handling.
• High-Strength Construction: Premium anodized alloy bodies for corrosion resistance and durability.
• Heavy-Duty Ball Joints: Steel ends provide maximum strength and smooth rotation.
• Articulation Voids: Designed to allow full suspension travel under load.
• Installation: Includes comprehensive install guide for straightforward fitment.
• Manufacturer Part Number: KLC107

Fits select 2001-2017 Ford Focus, Hyundai Elantra, Lexus ES300/RX330/RX350, Mazda 3, Mini Cooper/Countryman/Paceman, and Toyota Camry.

Standard factory sway bar links are often lightweight, fixed-length components that are prone to flexing under high cornering loads or creating unwanted preload when a vehicle is lowered or corner-balanced. The Whiteline KLC106 adjustable sway bar link kit is engineered to resolve these issues by allowing you to neutralize the sway bar and ensure maximum suspension efficiency and grip.

These links are manufactured from premium anodized alloy for superior corrosion resistance and feature heavy-duty steel ball joint ends for maximum durability. The design allows for up to 25mm of on-car length adjustment, meaning you can fine-tune your suspension geometry without removing the links from the vehicle. The ball joints provide a wide range of rotation to accommodate various angular combinations, preventing binding throughout the suspension travel.

• Manufacturer Part Number: KLC106
• Adjustment Range: Up to 25mm center-to-center
• Material: Anodized alloy bodies with steel ball joint ends
• Installation: Bolt-on design with on-car adjustment capability
• Function: Eliminates sway bar preload and improves steering response

Fits select 2002-2017 Mini Cooper (Base, S, JCW, Clubman, Roadster) and Land Rover Range Rover Evoque models.

Sway bar effectiveness is often hindered by worn OE mounts and flexible factory drop links. The Whiteline KLC105 front adjustable sway bar link kit is engineered to restore and improve suspension performance by eliminating the flex associated with original equipment. These high-strength links increase rigidity and responsiveness, providing a noticeable improvement in stability during lane changes and initial turn-in.

Featuring heavy-duty steel ball joint ends and premium anodized alloy bodies, these links are built to withstand high cornering loads while resisting corrosion. The adjustable design allows for up to 25mm of center-to-center length adjustment on the vehicle, which is essential for eliminating sway bar preload after lowering your vehicle or corner balancing.

• Center-to-center length adjustment of up to 25mm
• Heavy-duty steel ball joints for maximum durability and angular rotation
• Anodized alloy construction provides a long-lasting barrier against wear and corrosion
• Eliminates sway bar preload for neutral handling
• Includes comprehensive installation guide
• Manufacturer Part Number: KLC105

Fits select 1992-2026 Acura, BMW, Ford, Honda, Isuzu, Lincoln, Mazda, Mercury, Mitsubishi, and Tesla vehicles.

Whiteline adjustable sway bar links are engineered to maximize the effectiveness of your vehicle's anti-roll system. Factory links or worn OE mounts can often flex or bind, hindering the sway bar's ability to transfer load during cornering. These high-strength links eliminate the flex associated with original equipment, providing increased rigidity and immediate responsiveness during turn-in and high-speed lane changes.

Designed with a window of adjustability, the KLC102 kit allows for on-car length adjustment to eliminate sway bar preload—a common issue on vehicles with modified ride heights. The heavy-duty ball joints rotate to accommodate any angular combination, ensuring bind-free operation and optimum performance under load. Each link is manufactured from premium anodized alloy for superior corrosion resistance and features durable steel ball joint ends for long-term reliability.

• Replaces worn or inadequate factory drop links to restore and improve handling
• Provides up to 25mm of center-to-center length adjustment
• Eliminates sway bar preload during installation for neutral chassis balance
• Constructed from high-quality anodized alloy with heavy-duty steel ball joint ends
• Includes install guide with detailed instructions
• Manufacturer Part Number: KLC102

Fits select 2015-2021 Subaru WRX and STI, 2014-2018 Forester, and 2013-2017 Crosstrek models. These PERRIN Front Endlinks are designed to replace the flexible factory components with a more rigid connection, significantly improving sway bar response and handling precision.

Engineered to withstand the increased loads of aftermarket sway bars, these endlinks provide a solid link between the bar and the suspension. This reduction in compliance ensures that the sway bar begins working immediately during cornering, reducing body roll and sharpening steering input. They bolt directly to factory mounting points for a straightforward installation.

• Improves sway bar efficiency by eliminating link flex
• Maintains proper suspension geometry under load
• Includes all necessary high-grade mounting hardware
• Manufacturer Part Number: PSP-SUS-118

Fits select 1998-2013 Dodge and Ram 1500, 2500, and 3500 4WD trucks. These Tuff Country EZ-Ride Suspension front sway bar end links are designed to replace bent or broken factory units, providing a significant durability upgrade for lifted or stock-height trucks.

Featuring a threaded body design, these links offer precise adjustability to accommodate vehicles ranging from stock height up to a 3-inch lift; they are also compatible as replacement components for Tuff Country lift kits ranging from 2 to 6 inches. The integrated heim joints are a critical performance upgrade, replacing restrictive rubber bushings to reduce suspension binding and significantly improve axle articulation during off-road use.

• Replaces factory sway bar end links to improve suspension geometry
• Heim joints eliminate binding and allow for increased articulation
• Threaded body provides adjustability for stock height up to 3-inch lifts
• Compatible with Tuff Country 2-inch to 6-inch lift kits
• Durable construction designed for 4WD applications
• Manufacturer Part Number: 30927

Fits 1988-1997 Chevrolet K2500 and K3500 4WD trucks equipped with a 4-inch or 6-inch suspension lift.

The Tuff Country 10850 Front Sway Bar End Link Kit is engineered to correct the suspension geometry on lifted Heavy Duty Chevy trucks. When adding a 4" to 6" lift, the factory end links are no longer long enough to maintain the sway bar at the proper operating angle, which leads to binding and restricted articulation. These extended links restore the correct relationship between the sway bar and the front axle, ensuring the anti-roll system functions effectively without binding during suspension travel.

• Direct replacement for factory end links on lifted applications
• Extended length specifically sized for 4-inch to 6-inch lift kits
• Reduces or eliminates sway bar binding for improved suspension cycling
• High-strength construction to handle the increased leverage of larger tires
• Complete kit includes necessary hardware for installation
• Manufacturer Part Number: 10850

Fits select 2013-2024 Subaru BRZ and 2017-2020 Toyota 86.

These Torque Solution adjustable front endlinks (short) are engineered to replace the factory components, providing the adjustability needed to maintain proper sway bar geometry on lowered vehicles. By correcting the sway bar angle, these endlinks eliminate preload and ensure your suspension reacts predictably during cornering. They are a critical upgrade for enthusiasts looking to dial in their chassis for improved handling and reduced noise.

• Manufacturer Part Number: TS-SU-805S
• Configuration: Adjustable short-length front endlinks
• Application: Front sway bar
• Function: Eliminates sway bar preload on lowered vehicles
• Durability: Heavy-duty rod ends for long-lasting performance

Fits select 2008-2017 Subaru (Impreza, WRX, STI, BRZ, Forester, Crosstrek), 2013-2016 Scion FR-S, and 2017 Toyota 86.

Improve your vehicle's handling and suspension response with Torque Solution Spherical Rear Endlinks. Factory endlinks typically utilize soft rubber bushings or plastic components that flex under lateral loads, causing a delay in sway bar engagement. These spherical units eliminate that deflection, providing a direct, solid connection between the sway bar and the control arm for immediate stabilization during cornering.

Designed to withstand the rigors of both spirited street driving and track use, these endlinks are a critical upgrade for drivers looking to maximize the efficiency of their rear sway bar. They serve as a direct replacement for the OEM units, ensuring more predictable handling and improved geometry on both stock and lowered applications.

• Manufacturer Part Number: TS-SU-292
• High-strength spherical bearings for zero-deflection performance
• Eliminates soft factory bushing flex for sharper turn-in
• Direct-fit replacement for factory rear endlinks
• Includes all necessary high-grade mounting hardware

Fits 2004-2008 Subaru Forester (XT/Sports) and 2004-2007 Subaru Impreza WRX STI.

Torque Solution Urethane Rear Endlinks are designed to eliminate the flex and delay associated with factory rubber bushings. By replacing the soft OE components with these high-strength units, you ensure that sway bar energy is transferred immediately to the chassis, reducing body roll and sharpening handling response during aggressive cornering or track use.

Constructed for long-term durability, these endlinks feature high-durometer urethane bushings that resist environmental degradation and maintain their precision over time. These are a direct-fit upgrade for enthusiasts looking to stabilize the rear suspension geometry on their GD-chassis STI or SG-chassis Forester.

• High-durometer urethane bushings for minimal deflection
• Improves sway bar efficiency and suspension feedback
• Direct replacement for factory rear endlinks
• Manufacturer Part Number: TS-SU-210

Fits 2015-2021 Subaru WRX/STI and 2014-2024 Subaru Forester models.

Sharpen your vehicle's handling and sway bar response with Torque Solution Urethane Front Endlinks. Engineered to replace the compliant factory units, these endlinks utilize high-durometer urethane bushings to significantly reduce deflection. By minimizing the flex found in OEM rubber or plastic components, these endlinks ensure that sway bar energy is transferred immediately to the suspension, resulting in flatter cornering and more predictable turn-in.

• High-durometer urethane bushings for reduced deflection and improved durability
• Direct bolt-on replacement for the factory front endlinks
• Improves sway bar efficiency and overall chassis communication
• Resistant to oil, road salt, and environmental wear
• Manufacturer Part Number: TS-SU-208-VA

Fits select 2002-2017 Subaru WRX, STI, Impreza, Legacy, and Forester models.

Sharpen your vehicle's handling by replacing soft, flexible factory endlinks with Torque Solution Urethane Front Endlinks. These components provide a more direct connection between the front sway bar and the suspension by utilizing high-durometer urethane bushings. This reduction in compliance ensures that the sway bar engages faster during cornering, reducing body roll and improving steering precision without the harshness of spherical rod ends.

• High-durometer urethane bushings for reduced deflection
• Improves steering response and handling predictability
• Direct bolt-on replacement for factory front endlinks
• Durable construction designed for street or track use
• Manufacturer Part Number: TS-SU-208

Fits Porsche 986, 987, 981, and 718 Boxster and Cayman models.

The Torque Solution Adjustable Rear Drop Links (TS-POR-887) provide the precision adjustment needed to fine-tune your Porsche's suspension geometry. These links are essential for vehicles that have been lowered or corner-balanced, as they allow you to eliminate sway bar preload and ensure the stabilizer bar remains in its optimal operating range.

• Replaces soft factory drop links to provide a more direct suspension response
• Fully adjustable length to accommodate various ride heights and suspension setups
• Designed to clear surrounding suspension components throughout the full range of travel
• Essential for correcting sway bar geometry on lowered 986, 987, 981, and 718 chassis
• Manufacturer Part Number: TS-POR-887

Fits select 1997-2019 Porsche 911, Boxster, and Cayman models (996, 997, 991, 986, 987, and 981 chassis).

Correct your suspension geometry and optimize handling with Torque Solution Adjustable Front Drop Links. These components are essential for drivers of lowered Porsches or those seeking a precise alignment for track or spirited street use. Unlike fixed-length factory units, these adjustable links allow you to eliminate sway bar preload, ensuring the sway bar remains neutral at static ride height for consistent and predictable cornering.

• Manufacturer Part Number: TS-POR-431
• Placement: Front Suspension
• Adjustable design allows for precise corner balancing
• Eliminates sway bar preload on lowered vehicles
• High-strength construction for increased durability over OE units
• Direct bolt-on replacement for factory drop links

Fits select 1998-2011 Porsche 911 (996 and 997 chassis) including Carrera, Turbo, GT2, and GT3 models.

Torque Solution Adjustable Rear Drop Links are designed to replace the fixed-length factory links, allowing for precise sway bar positioning and the elimination of suspension preload. This is a critical upgrade for lowered Porsches or those undergoing professional corner balancing, ensuring the sway bar performs as intended without binding or unwanted tension.

• Provides adjustable length for custom suspension geometry tuning
• Eliminates sway bar preload on lowered vehicles or track setups
• Direct replacement for factory rear drop links
• Manufacturer Part Number: TS-POR-008

Fitment Applications:

• 1998-2011 Porsche 911 Carrera
• 1998-2004, 2006-2011 Porsche 911 Carrera 4
• 1998, 2002-2011 Porsche 911 Carrera 4S
• 1998, 2005-2011 Porsche 911 Carrera S
• 2011 Porsche 911 Carrera GTS
• 2001-2005, 2007-2011 Porsche 911 Turbo / Turbo S
• 2002-2005, 2008-2009 Porsche 911 GT2 / GT2 RS
• 2004-2005, 2007-2008, 2010-2011 Porsche 911 GT3 / GT3 RS / RS 4.0
• 1998, 2002 Porsche 911 Targa / Targa 4 / Targa 4S
• 2011 Porsche 911 Speedster

Fits 2001-2011 Porsche 911 Turbo, GT2, Turbo S, and GT2 RS.

The Torque Solution Adjustable Front Drop Links (TS-POR-007) are designed to provide the precise suspension tuning required for high-performance Porsche 911 models. By replacing the fixed-length factory links, these adjustable units allow you to eliminate sway bar preload, which is critical for maintaining neutral handling and balanced weight distribution on vehicles that have been lowered or corner-balanced.

• Provides precise sway bar geometry adjustment to eliminate preload
• Enhances suspension predictability and cornering performance
• Designed to withstand the increased loads of track use and aggressive street driving
• Direct replacement for OE front drop links
• Includes all necessary hardware for a complete installation
• Manufacturer Part Number: TS-POR-007

Fits select 1997-2012 Porsche 911 (996/997), Boxster (986/987), and Cayman (987) models.

The Torque Solution Rear Toe Link Kit is engineered to provide the precise suspension adjustment required for high-performance driving. Factory toe links often utilize rubber bushings that deflect under heavy cornering loads, leading to inconsistent alignment and unpredictable handling. By replacing these components with Torque Solution's adjustable links, you can achieve and lock in the exact rear toe settings needed for improved stability and tire contact.

These links are essential for lowered vehicles where factory adjustment range is insufficient to return the rear suspension to its optimal geometry. Whether for dedicated track use or spirited street driving, this kit ensures your Porsche maintains its alignment during aggressive maneuvers.

• Provides a wider range of rear toe adjustment than factory hardware
• Eliminates suspension deflection for more predictable handling
• Essential for maintaining proper alignment on lowered vehicles
• Direct replacement for factory rear toe links
• Manufacturer Part Number: TS-POR-003

Fits 2018-2024 Jeep Wrangler JL and JLU models. These Synergy Manufacturing Rear Sway Bar Links are designed to correct sway bar geometry on lifted vehicles or replace damaged factory units. Proper link length is critical for maintaining suspension stability and preventing the sway bar from flipping over-center during high-articulation off-road maneuvers.

• Manufactured from heavy-duty steel for increased rigidity over OE components
• Clear zinc plating provides maximum corrosion resistance against road salt and trail debris
• Direct bolt-on installation to factory mounting points
• Helps maintain proper rear sway bar operating angle
• Sold as a pair
• Manufacturer Part Number: 8861-11

Fits 2018-2024 Jeep Wrangler JL and JLU (2-Door & 4-Door) models.

Correct your suspension geometry and restore handling precision with Synergy Manufacturing Rear Sway Bar Links. These heavy-duty components are designed to replace factory links that are often prone to bending or are no longer at the correct length following a suspension lift. By returning the sway bar to its optimal operating angle, these links prevent the bar from over-centering during off-road articulation and ensure consistent roll stiffness on the street.

Engineered for a straightforward bolt-on installation, these links utilize factory mounting points for a secure fit. The assembly features high-quality bushings designed to withstand the rigors of off-road use while resisting environmental degradation. Whether you are replacing worn-out OE parts or correcting geometry on a modified Jeep, these links provide the durability and performance required for the JL platform.

• Manufacturer Part Number: 8860-11
• Direct bolt-on replacement for factory rear sway bar links
• Maintains proper sway bar geometry for improved handling and stability
• Heavy-duty construction for increased durability over stock components
• Includes all necessary hardware for a complete installation

Fits 2018-2024 Jeep Wrangler JL/JLU and 2020-2024 Jeep Gladiator JT.

Improve your suspension's geometry and handling with these Synergy Front Sway Bar Links. Designed as a heavy-duty replacement for factory components, these links (MPN 8859-11) are engineered to withstand the rigors of off-road use while maintaining stable, predictable on-road performance. These links are a critical upgrade for owners looking to replace worn-out OE bushings or reinforce their suspension system against the increased stresses of larger tires and rugged terrain.

• Direct bolt-on installation to factory mounting points
• Heavy-duty construction resists bending and fatigue under articulation
• Maintains proper sway bar operating angles for improved roll control
• Complete set for front axle application
• Manufacturer Part Number: 8859-11

Fits select 2009-2024 Toyota 4Runner and FJ Cruiser, and Lexus GX460 and GX470.

SuperPro TRC4307 Heavy Duty Extended Thread Sway Bar Links are engineered to restore proper suspension geometry on vehicles with 2 to 8 inches of lift. When lifting a Toyota or Lexus body-on-frame SUV, factory sway bar links are often too short, leading to poor sway bar alignment and potential tail shaft interference. These links are designed to be trimmed to your specific length, ensuring adequate clearance and optimal sway bar performance.

Constructed from a heavy-duty 16mm rod, these links offer superior strength compared to OE components. The design provides increased stud articulation, reducing stress on the link and sway bar during extreme wheel travel or off-road articulation.

• Manufacturer Part Number: TRC4307
• Accommodates lift heights from 2 inches to 8 inches
• Trimmable extended thread design for custom length adjustment
• Heavy-duty 16mm rod construction for maximum durability
• Enhanced stud articulation for reduced stress during suspension travel
• Sold individually