Fits select 1997-2013 Chevrolet Corvette models including Base, Grand Sport, Z06, ZR1, and 427. This Pedders SportsRyder Sway Bar Kit is an integrated suspension solution designed to reduce body roll and improve handling balance by correcting the weaknesses found in original equipment components. The kit provides the ideal balance between daily-driver civility and performance handling, ensuring your Corvette feels planted and responsive.

• 35mm tubular front sway bar for increased front-end rigidity.
• 25.4mm 3-point adjustable rear sway bar to fine-tune handling characteristics.
• High-grade polyurethane bushings and all necessary installation hardware included.
• Durable Pedders Red powder coat finish for superior corrosion protection.
• Engineered to bolt directly to factory mounting points.
• Manufacturer Part Number: PED-803517

Fits 2005-2014 Ford Mustang Base, GT, Boss 302, and Shelby models.

The Pedders 24mm non-adjustable rear sway bar is engineered to enhance the handling characteristics of the S197 Mustang chassis. By increasing the rear roll stiffness, this bar effectively reduces body roll during cornering and helps neutralize factory understeer for a more balanced and predictable driving experience.

This fixed-rate sway bar is designed for the enthusiast looking for a "set and forget" suspension upgrade. It provides a significant improvement in turn-in response and cornering stability compared to the factory rear bar without the complexity of multiple adjustment points. This component is a direct fit for the 2005-2014 Mustang, making it an ideal solution for improving both daily driving feel and spirited performance.

• Diameter: 24mm
• Position: Rear
• Adjustment: Non-adjustable (Fixed Rate)
• Chassis: S197
• Manufacturer Part Number: PED-429025-24

Fits select 2015-2022 Ford Mustang models, including EcoBoost, GT, V6, Bullitt, Mach 1, and Shelby GT350/GT500.

The Pedders PED-429024-25 Adjustable 25mm Rear Sway Bar is engineered to enhance the handling characteristics of the S550 chassis by reducing body roll and improving lateral stability. Designed as a direct replacement for the factory unit, this sway bar allows enthusiasts to fine-tune the vehicle's balance, helping to neutralize understeer or oversteer depending on the driving environment and tire setup.

Pedders engineers identify weaknesses in OE suspension components and develop solutions that maintain daily-driver civility while providing competition-ready performance. This 25mm bar is constructed for durability and precision, ensuring consistent suspension geometry during high-load cornering without the harshness often found in dedicated race components.

• Diameter: 25mm
• Adjustment: Multi-point adjustable for fine-tuning roll stiffness
• Material: High-grade spring steel for consistent performance
• Installation: Bolts to factory mounting locations
• MPN: PED-429024-25

Vehicle Fitment

Fits 2012-2015 Chevrolet Camaro SS, ZL1, and Z/28 models.

The Pedders PED-429021-32 is a heavy-duty 32mm rear sway bar designed to enhance the handling characteristics of the 5th Generation Chevrolet Camaro. This "Late/Wide" configuration specifically addresses the factory suspension geometry of 2012+ performance models, replacing the undersized OE bar to significantly reduce body roll and improve cornering stability. By increasing the torsional stiffness of the rear suspension, this bar helps neutralize understeer and provides a more balanced, predictable chassis response during spirited driving.

Engineered for the enthusiast who demands better performance without compromising daily-driver civility, this non-adjustable bar bolts directly into factory mounting locations. The solid construction ensures consistent rate transfer and long-term durability under high load.

• Diameter: 32mm solid spring steel
• Design Type: Non-Adjustable Late/Wide configuration
• Improves lateral stability and reduces body roll
• Specifically engineered for 2012-2015 high-performance Camaro trims
• Part Number: PED-429021-32

Fits select 2010-2015 Chevrolet Camaro LS and LT, and 2010-2011 Camaro SS models.

The Pedders 27mm adjustable rear sway bar is engineered to reduce body roll and improve the cornering stability of the 5th Generation Camaro chassis. By increasing the roll stiffness of the rear suspension, this bar helps keep the vehicle flatter through turns, resulting in more predictable turn-in and improved tire contact patches during aggressive maneuvers. This specific unit is designed for the "Early/Narrow" mounting configuration, ensuring a precise fit for vehicles using the original factory geometry.

• Adjustable Rates: Features multiple mounting points, allowing you to fine-tune the suspension stiffness to suit your specific driving style or track conditions.
• Spring Steel Construction: Manufactured from heavy-duty solid spring steel for maximum durability and consistent performance under load.
• Direct Fit: Designed to mount to factory locations using the early/narrow design architecture found on 2010-2015 LS/LT and 2010-2011 SS models.
• Enhanced Control: Minimizes chassis roll to sharpen steering response and reduce understeer.
• Manufacturer Part Number: PED-429020-27

Fits 2004-2006 Pontiac GTO Base.

The Pedders Adjustable 19mm Rear Sway Bar is engineered to correct the factory suspension's handling deficiencies, providing the lateral stability needed for spirited driving without sacrificing daily ride quality. By increasing the torsional rigidity of the rear suspension, this bar significantly reduces body roll and improves turn-in response on the GTO chassis.

Built for the enthusiast who demands a "factory hot rod" feel, this component is designed as an integrated solution to replace the weak points of the OE suspension. The adjustable design allows you to fine-tune the rear roll stiffness to suit your specific driving style or track conditions. Pedders components are developed through extensive real-world testing to ensure a perfect balance between high-performance handling and street-legal civility.

• Bar Diameter: 19mm
• Position: Rear
• Adjustment: Adjustable mounting points for variable stiffness
• Fitment: Direct-fit replacement for factory rear sway bar
• Manufacturer Part Number: PED-429005-20

Fits 2005-2014 Ford Mustang S197 models.

The Pedders 35mm adjustable tubular front sway bar is engineered to replace the factory unit and correct inherent OE suspension weaknesses. By increasing torsional stiffness, this sway bar significantly reduces body roll and improves turn-in response without compromising the civil ride quality required for a daily-driven enthusiast vehicle. The tubular steel construction provides a high strength-to-weight ratio, ensuring durability without adding excessive mass to the front end.

This sway bar features a 3-hole adjustment design, allowing drivers to fine-tune the roll rate to match their specific driving style, tire setup, or track conditions. Whether you are looking for a flatter cornering profile on the street or more aggressive rotation at the limit, this Pedders component delivers the ideal balance between performance and comfort.

• Part Number: PED-428026-35
• Diameter: 35mm
• Material: High-quality tubular steel
• Adjustment: 3-hole mounting points for variable stiffness
• Fitment: Direct replacement for S197 chassis front sway bars

Fits 2015-2022 Ford Mustang models including EcoBoost, GT, V6, Bullitt, Mach 1, and Shelby (GT350/GT500).

Improve the cornering attitude and lateral stability of your S550 with the Pedders 35mm adjustable front sway bar. This bar is specifically engineered to identify and correct the inherent weaknesses in the factory suspension, providing a significant upgrade for enthusiasts who demand flatter cornering without sacrificing the civility of a daily driver. By reducing body roll and increasing front-end roll stiffness, this bar ensures your Mustang stays planted through high-speed transitions and technical turns.

Constructed as an integrated suspension solution, this 35mm bar offers multiple adjustment points, allowing you to fine-tune the handling balance to suit your driving style or specific track conditions. Pedders designs these components to bridge the gap between factory comfort and race-ready performance, delivering a "factory hot rod" feel that remains quiet and comfortable on the street.

• Part Number: PED-428024-35
• Diameter: 35mm for increased roll stiffness
• Adjustable design for precise handling tuning
• Reduces body roll during cornering and lane changes
• Engineered to suit the Ford Mustang S550 chassis
• Direct replacement for the factory front sway bar

Fits 2010-2015 Chevrolet Camaro LS, LT, SS, Z/28, and ZL1 models.

The Pedders 3-point adjustable front sway bar is engineered to transform the handling characteristics of the 5th Gen Camaro. By identifying and correcting the weaknesses in the factory suspension, Pedders provides a solution that reduces body roll and improves turn-in response without sacrificing the ride quality needed for a daily driver. This bar allows for fine-tuning of the chassis balance, enabling drivers to achieve the ideal equilibrium between civility and performance handling.

Constructed from 27mm solid spring steel, this sway bar is built to withstand the rigors of spirited driving and track sessions alike. Each bar is developed through extensive R&D to deliver what enthusiasts call the "Pedders feel"—a factory hot rod sensation that remains quiet and comfortable while delivering significantly improved cornering stability.

• 3-point adjustability for customized handling balance
• 27mm solid steel construction for maximum torsional stiffness
• Designed to replace original equipment and correct OE suspension weaknesses
• Maintains daily-driver comfort while improving performance
• Manufacturer Part Number: PED-428020-27A

Fits 2004-2006 Pontiac GTO Base.

The Pedders PED-428005-30 front sway bar is an engineered suspension solution designed to correct the handling weaknesses inherent in the original equipment. With a 30mm diameter and adjustable mounting points, this bar allows drivers to fine-tune roll stiffness for the ideal balance between performance cornering and daily-driver civility. By reducing body roll and improving steering response, it transforms the GTO into a more stable and predictable performance machine.

Developed and tested through Pedders' R&D programs, this sway bar is built for the enthusiast who demands a "factory hot rod" feel—comfortable enough for the street but capable enough for the track. It serves as a direct upgrade to the factory unit, fitting the original chassis points while providing significantly more authority over the vehicle's roll center.

• Part Type: Front Sway Bar
• Diameter: 30mm
• Adjustment: Adjustable linkage points for custom tuning
• Engineered for enthusiast drivers to eliminate excessive body roll
• Maintains factory-level comfort and noise suppression
• Manufacturer Part Number: PED-428005-30

Fits select 2005-2017 Chrysler 300, Dodge Challenger, Charger, and Magnum models.

The Pedders 35mm Adjustable Front Sway Bar is engineered to transform the handling characteristics of the Chrysler LX and LD chassis. By replacing the smaller, non-adjustable factory bar, this upgrade significantly reduces body roll during cornering, providing a flatter, more stable platform without compromising the ride quality required for a daily driver. Designed for the automotive enthusiast who demands a balance between civility and performance handling, this sway bar allows for fine-tuning of the vehicle's suspension response.

Constructed from high-grade materials and finished in a durable coating, this 35mm bar features multiple mounting points to adjust the lever arm length, effectively increasing or decreasing the roll stiffness. This allows drivers to dial in the front-end grip and steering precision to suit their specific driving style or wheel and tire setup. Like all Pedders suspension components, this bar is developed to correct OE weaknesses and provide a "factory hot rod" feel that is quiet, comfortable, and responsive.

• Part Number: PED-428001-35
• Diameter: 35mm
• Adjustability: Multi-hole adjustable ends for custom roll stiffness tuning
• Finish: Durable red powder coating for corrosion resistance
• Function: Reduces body roll and improves steering response
• Application: Front suspension

Fits select 2015-2016 Cadillac Escalade/ESV, Chevrolet Suburban, Tahoe, and GMC Yukon/XL models. This Hotchkis Sport Suspension (2292) Sport Sway Bar Kit is engineered to eliminate the wallowing feel and excessive body roll common in large GM SUVs. By increasing roll stiffness, this kit improves steering response and provides a more stable, controlled platform during high-speed cornering, heavy towing, or when hauling cargo on roof racks.

The kit features lightweight, CNC-bent tubular steel bars designed for maximum strength and reduced weight. The 1.50-inch front bar provides 30% more stiffness than stock across all platforms. The 1.25-inch rear bar is tuned for the specific wheelbase of your vehicle, offering 80% more stiffness for Tahoe, Yukon, and Escalade, or 45% for longer-wheelbase Suburban, Yukon XL, and Escalade ESV models. All components are finished in a durable gloss black powder coat for long-term corrosion resistance.

• Front Sway Bar: 1.50 in. diameter tubular steel (30% stiffer than stock)
• Rear Sway Bar: 1.25 in. diameter tubular steel (45% to 80% stiffer depending on wheelbase)
• Rear End-Links: Precision TIG-welded construction with greasable polyurethane bushings
• Hardware: Heavy-duty brackets, bolts, washers, and upgraded original-style front end-links
• Bushings: Easy-to-lubricate polyurethane for quiet operation and improved response
• Finish: Gloss black powder coat
• Manufacturer Part Number: 2292

Fits 1997-2013 Chevrolet Corvette Base, Z06, ZR1, Grand Sport, and special editions (427, 50th Anniversary).

The Hotchkis Sport Suspension 2285R rear sway bar set is designed to dramatically improve the cornering potential of your C5 or C6 Corvette by reducing body roll and improving turn-in response. This 1-inch tubular steel bar is lighter than solid alternatives and features three adjustment settings, allowing you to fine-tune your suspension balance to suit specific track conditions or street driving preferences.

Constructed from high-strength tubular steel and finished in a durable gloss black powder coat, this bar is significantly stiffer than the factory Z51 equipment. The kit includes oil-impregnated rubber bushings for quiet, long-lasting operation. Note that while this bar installs into factory locations, upgrading to Z06-style metal end links is highly recommended to handle the increased stiffness.

• Part Number: 2285R
• Diameter: 1 inch (25.4mm)
• Construction: Lightweight adjustable tubular steel
• Finish: Gloss black powder coat
• Adjustment Settings: +60%, +100%, and +150% stiffer than stock Z51
• Included: Oil-impregnated rubber bushings
• Fitment: Replaces factory rear sway bar on 1997-2013 Corvette models

Fits 1997-2004 Chevrolet Corvette (Base, Z06, and 50th Anniversary models).

Improve the cornering potential and chassis balance of your C5 Corvette with the Hotchkis Sport Suspension 2285 sway bar kit. Designed for street, autocross, and road course applications, these lightweight hollow bars significantly reduce body roll and increase steering response. The 1.25-inch front bar is 115% stiffer than the factory Z51 component, while the 1-inch rear bar is adjustable from +60% to 150% stiffer, allowing you to fine-tune the handling balance for your specific driving style.

Each bar is CNC-formed for a precise fit and finished in a durable gloss black powder coat. This kit includes high-durometer, dry-lube-impregnated rubber bushings to maintain quiet operation while improving suspension feedback. This system is designed to retain factory end links for a straightforward installation that preserves street driveability.

• Manufacturer Part Number: 2285
• Front Bar Diameter: 1.25in (32mm) hollow tube
• Rear Bar Diameter: 1in (25mm) hollow tube
• Finish: Gloss black powder coat
• Hardware: High-durometer dry lube bushings included
• Fitment: Replaces factory front and rear sway bars; retains OE end links

Fits 2015-2017 BMW M2, M3, and M4 (Base and GTS models).

The Hotchkis Sport Sway Bar Kit (MPN 22842) is designed to significantly reduce body roll and improve steering response on the BMW F80, F82, and F87 chassis. This kit replaces factory bars with high-strength, lightweight tubular steel components, providing increased roll stiffness without adding excessive weight. Whether on the street or the track, these bars allow for precise chassis tuning through multiple adjustment points.

• Tubular front and rear bars for optimized strength-to-weight ratio
• Multi-way adjustable to fine-tune handling balance and minimize understeer/oversteer
• CNC-bent for exact fitment and clearance using factory mounting points
• Durable powder-coated finish for long-lasting corrosion resistance
• Proudly Made in the USA

• Front Bar Diameter: 32mm Tubular
• Rear Bar Diameter: 25.5mm Tubular
• Front Rates: 100, 125, 140, 160 lbs/in
• Rear Rates: 165, 185, 200 lbs/in
• Manufacturer Part Number: 22842

Fits select 2005-2013 Chevrolet Corvette (Base, Z06, ZR1, Grand Sport, and 427).

Improve your C6 Corvette's cornering potential and chassis balance with the Hotchkis Sport Suspension 2284 sway bar set. Designed for high-performance street driving, autocross, and road course applications, this kit significantly reduces body roll and increases driver feedback without sacrificing ride quality. The set utilizes lightweight hollow tubular steel, CNC-formed for precision fitment and finished in a durable gloss black powder coat.

The front bar offers a 20% increase in stiffness over factory Z51 and Z06 units, while the rear bar features three-way adjustability, allowing you to fine-tune the handling balance from -15% to +80% depending on your specific model and track conditions. These bars are designed to work with factory end links to maintain quiet operation during daily use.

• Manufacturer Part Number: 2284
• Front Sway Bar: 1.25-inch (32mm) lightweight tubular steel
• Rear Sway Bar: 1.125-inch (28.5mm) adjustable tubular steel
• Front Stiffness: 20% stiffer than Z51 and Z06
• Rear Stiffness (Z51): Adjustable +15%, +45%, +80%
• Rear Stiffness (Z06): Adjustable -15%, Stock, +30%
• Bushings: High durometer dry lube impregnated rubber
• Finish: Gloss black powder coat
• Installation: Reuses factory mounting points and end links

Fits 2003 Audi RS6 Base.

The Hotchkis Sport Suspension Sport Sway Bar Set is specifically engineered to address the mid-corner body roll of the Audi RS6 without compromising ride quality. Unlike standard A6 components, this RS6-specific set is designed to clear the unique rear-end geometry of the RS6 for free and efficient operation. This kit features a 35mm tubular front bar and a 24mm tubular rear bar, providing a significant increase in roll stiffness to complement the factory shock valving and spring rates.

• Front Bar: 35mm tubular construction, non-adjustable (+50% stiffer than stock).
• Rear Bar: 24mm tubular construction, 2-position adjustable (+49% or +67% stiffer than stock).
• Construction: Precision-bent tubular steel for weight savings and durability.
• Installation: Direct bolt-on design; no cutting, welding, or vehicle modification required.
• Included Hardware: Greasable polyurethane bushings, mounting brackets, and all necessary hardware.

Part Number: 22827

Fits 1999-2006 BMW M3 Base models.

The Hotchkis Sport Suspension 22826R Rear Sport Sway Bar is engineered to correct factory understeer and limited roll control on the E46 chassis. This 1-inch (25mm) tubular rear bar is significantly lighter than solid alternatives while providing increased stiffness for flatter cornering and sharper turn-in response. By increasing rear roll stiffness, this bar allows the driver to rotate the car more effectively on corner entry and maintain a neutral handling balance.

This premium kit includes performance rear end links and greasable bushings for a complete installation. The bar features two distinct tuning holes, giving you the ability to set the stiffness to +79% or +105% over the factory equipment to suit your driving style or track conditions.

• Diameter: 1 in. (25mm)
• Construction: Lightweight tubular steel
• Adjustability: 2-way adjustable (+79% or +105% stiffer than stock)
• Finish: Durable powder coat
• Includes: Performance rear end links and greasable bushings
• Manufacturer Part Number: 22826R

Fits 1999 and 2001-2006 BMW M3 Base models.

Enhance the cornering performance and turn-in response of your E46 with the Hotchkis Sport Suspension Front Sport Sway Bar. This upgrade increases front roll stiffness to mitigate factory understeer, providing a more neutral handling balance and allowing the driver to rotate the car more effectively using the throttle. Manufactured from high-strength tubular steel, this bar maintains structural integrity while minimizing weight.

• Bar Diameter: 1-3/16 in. (30mm) tubular construction
• 3-Way adjustable design for precision chassis tuning
• Rate Increases vs. Stock: +11%, +28%, and +49%
• Durable powder coat finish for long-lasting corrosion resistance
• Includes greasable polyurethane bushings for smooth, quiet operation
• Engineered to improve roll control and steering feedback
• Manufacturer Part Number: 22826F

Fits 1999-2006 BMW M3 Base models.

The Hotchkis Sport Suspension 22826 Sport Sway Bar Set is engineered to improve cornering performance by significantly increasing front and rear roll stiffness. This kit is designed to correct factory understeer and limited roll control, providing the driver with a more balanced, neutral handling profile. The increased stiffness enables more precise rotation on corner entry and allows for throttle-steer when necessary.

• Front Sway Bar: 1-3/16 in. (30mm) tubular, 3-way adjustable
• Front Tuning Rates: +11%, +28%, and +49% stiffness increase over stock
• Rear Sway Bar: 1 in. (25mm) tubular, 2-way adjustable
• Rear Tuning Rates: +79% and +105% stiffness increase over stock
• Includes performance rear end links and greasable bushings
• Durable powder coat finish for long-term corrosion resistance
• 6 different tuning rates possible via multiple end link positions

Note: May not fit convertible models. Manufacturer Part Number: 22826.

Fits select 1999-2006 BMW 3-Series (E46) models, including 318ti, 323i/Ci, 325i/Ci, 328i/Ci, and 330i/Ci.

The Hotchkis Sport Suspension 22825F Front Sport Sway Bar is engineered to significantly increase the handling performance and cornering grip of the E46 chassis. By reducing body roll and improving turn-in response, this bar provides the driver with more control during spirited driving or track use. It is manufactured from 30.2mm (1-3/16 in.) tubular steel, offering high torsional rigidity while remaining significantly lighter than a solid bar of the same diameter.

This front sway bar features a 3-way adjustable design, allowing you to fine-tune the roll stiffness to match your tires and suspension setup. For reference, when tested against a 2004 330ci Sport, this bar offers stiffness increases of 31%, 51%, or 77% depending on the chosen adjustment hole.

• Diameter: 30.2mm (1-3/16 in.)
• Construction: Lightweight Hollow Tubular Steel
• Adjustability: 3-Way Adjustable Stiffness
• Bar Rates: 470 lbs/in, 540 lbs/in, 630 lbs/in
• Finish: Durable Black Powder Coat
• Manufacturer Part Number: 22825F

Fits select 1999-2006 BMW 3 Series E46 (Non-Xi) 318ti, 323i/Ci, 325i/Ci, 328i/Ci, and 330i/Ci; excludes Convertible models.

The Hotchkis Sport Suspension tubular sway bar set (MPN: 22825) is engineered to significantly reduce body roll and sharpen steering response on the E46 chassis. By utilizing lightweight, high-strength tubular steel, this set provides increased roll stiffness without the weight penalty of solid bars, making it an ideal upgrade for both spirited street driving and track days.

This kit features a 30.2mm 3-way adjustable front bar and a 25.4mm 2-way adjustable rear bar, allowing for precise chassis tuning. Hotchkis includes specialized adapter plates for the rear bushing brackets, which replace the weak OE tabbed brackets with heavy-duty standard-style brackets. This design incorporates zerk fittings for easy lubrication and adds critical strength to the rear subframe mounting points.

• Front Sway Bar: 30.2mm (1 3/16 in.) hollow, 3-way adjustable
• Rear Sway Bar: 25.4mm (1 in.) hollow, 2-way adjustable
• Front Spring Rates: 470, 540, and 630 lbs/in
• Rear Spring Rates: 475 and 540 lbs/in
• Stiffness Increase: Up to +77% front and +171% rear over 330Ci Sport baseline
• Finish: Durable black powdercoat for corrosion resistance
• Hardware: Includes polyurethane bushings, greaseable brackets, and rear end links

Fits select 1963-1973 GM A-Body vehicles including Buick Skylark and GS, Chevrolet Chevelle, El Camino, and Monte Carlo, Oldsmobile 442 and Cutlass, and Pontiac GTO, LeMans, and Tempest.

The Hotchkis Sport Suspension Extreme Sway Bar Set (MPN 2282) is engineered to significantly improve cornering performance, stability, and traction for high-horsepower GM A-Body builds. Unlike the rigid factory-style rear bar, this system utilizes a pivoting design that reduces fatigue and stress on the bar and mounting points, allowing for smoother suspension travel while maintaining superior roll control.

The kit features a 1-3/8 inch lightweight tubular front bar and a 1-1/4 inch tubular rear bar. The adjustable rear design offers two stiffness settings—75% and 100% stiffer than stock—allowing drivers to fine-tune the handling balance to compensate for larger tires or specific weight distributions. All components are finished in a durable gloss black powder coat for long-lasting corrosion resistance.

• Front Sway Bar: 1-3/8 inch (35mm) lightweight tubular steel
• Rear Sway Bar: 1-1/4 inch (32mm) adjustable tubular steel
• Adjustable Rear: Two tuning options (75% and 100% stiffer than stock)
• Rear End-Links: Precision TIG-welded construction
• Bushings: Greasable polyurethane for reduced deflection and easy maintenance
• Hardware: Includes stainless steel u-bolts, laser-cut axle mounts, and Grade 8 bolts
• Finish: Gloss black powder coat
• Manufacturer Part Number: 2282

Fits select 2002-2012 Mini Cooper models, including Base, S, John Cooper Works, Clubman, Coupe, and Roadster. This Competition Rear Sway Bar is designed specifically for track and autocross use to significantly reduce body roll and improve rotation.

Constructed from lightweight 25.5mm tubular 4130 chrome moly, this bar weighs only 5.5 pounds while offering superior rigidity compared to solid alternatives. The three-way adjustable design allows for fine-tuning based on corner speed and track layout. The softest setting provides a neutral balance for medium to high-speed corners, while the stiffest setting (a 383% increase over stock) delivers a rear-steer feel that is ideal for tight, technical corners where throttle-steering is essential.

• Manufacturer Part Number: 22810R
• Diameter: 25.5mm Tubular 4130 Chrome Moly
• Weight: 5.5 lbs
• Adjustment: 3-Way Adjustable
• Stiffness Increase: +226%, +294%, and +383% over factory rates
• Includes: Greaseable polyurethane bushings, heavy-duty brackets, and 90-degree zerk fittings for easy maintenance

Fits 2014-2024 Infiniti Q50 and 2017-2022 Infiniti Q60 AWD models.

The Hotchkis Sport Swaybar Set (MPN 22450) is engineered to significantly improve the handling and cornering performance of your Infiniti. By increasing the roll stiffness of the chassis, this set effectively reduces body roll during aggressive cornering and improves steering response, providing a more composed and planted feel without compromising daily ride comfort.

• Specifically designed for All-Wheel Drive (AWD) sedan and coupe models
• CNC-bent for a precise, bolt-on fit using factory mounting points
• Optimized to reduce body roll and improve chassis balance
• Manufacturer Part Number: 22450

Fits 2014-2024 Infiniti Q50 models (including Sport, Red Sport 400, and Hybrid trims).

Enhance the handling dynamics of your sport sedan with the Hotchkis 22449R Rear Sway Bar. This component is engineered to significantly reduce body roll during cornering and rapid transitions by increasing the rear roll stiffness. By balancing the chassis, this sway bar provides more neutral handling and crisper turn-in response without compromising daily driving comfort.

• Reduces body roll and improves cornering grip
• Increases rear roll stiffness for better chassis balance
• Direct-fit replacement for the factory rear sway bar
• Durable powder-coated finish for corrosion resistance
• Manufacturer Part Number: 22449R

Fits 2017-2022 Infiniti Q60 models including Base, Luxe, Premium, Pure, Red Sport 400, and Sport.

The Hotchkis Sport Sway Bar Set (MPN: 22449) is engineered to significantly enhance the handling characteristics of your Infiniti Q60. This performance suspension upgrade reduces body roll and increases chassis stiffness, providing improved cornering grip and more predictable handling during spirited driving or track sessions. By replacing the factory sway bars with this balanced set, you achieve flatter cornering and a more precise steering response without compromising daily drivability.

• Direct-fit replacement for factory sway bars
• Engineered to minimize body roll and improve turn-in response
• Constructed for optimized chassis balance and stability
• Fits various submodels including Red Sport 400 and Luxe
• Manufacturer Part Number: 22449

Fits select 2007-2012 Infiniti G35 X and G37 X AWD models. This kit is designed specifically for All-Wheel Drive (AWD) variants to correct factory understeer and improve overall chassis balance.

The Hotchkis Sport Suspension Sport Sway Bar set transforms the handling characteristics of your Infiniti G35X or G37X by significantly increasing front and rear roll stiffness. This result is a flatter cornering attitude, crisper turn-in response, and more neutral handling that allows for throttle-steering when needed. These bars are manufactured from lightweight, high-strength tubular steel and feature an anthracite powder coat finish for long-term corrosion resistance.

• Front Sway Bar: 1-3/8 in. (35mm) tubular steel, 2-way adjustable
• Rear Sway Bar: 1.063 in. (27mm) tubular steel, 3-way adjustable
• Premium greasable polyurethane bushings and heavy-duty brackets included
• Bolt-on installation using factory mounting points
• Manufacturer Part Number: 22443

Note: This kit fits AWD models only. For RWD models, please see Hotchkis part number 22441.

Fits select 2007-2020 Nissan 370Z and 2007-2013 Infiniti G35 and G37 models.

Improve your vehicle's handling dynamics with the Hotchkis Sport Suspension 22441R Rear Sport Sway Bar. This 28.5mm tubular bar is engineered to increase rear roll stiffness, effectively eliminating factory understeer and providing a more neutral, balanced feel through high-speed corners. The 3-way adjustable design allows you to fine-tune the chassis response to suit your driving style, whether you are looking for crisp street turn-in or rotation on the track.

Constructed from lightweight, high-tensile hollow steel, this sway bar is finished in a durable anthracite powder coat for superior corrosion resistance. This kit is designed as a direct bolt-on replacement and includes all necessary premium hardware, including greasable polyurethane bushings and heavy-duty brackets for a quiet, maintenance-free operation. Note: Specifically designed for RWD models; AWD models require kit #22443.

• Diameter: 1.125 in. (28.5mm) hollow tubular steel construction
• Adjustment: 3-Way adjustable for custom chassis tuning
• Stiffness vs Stock G37: +130%, 185%, 260%
• Stiffness vs Stock G37S: +15%, 40%, 75%
• Stiffness vs Stock G35S: +60%, 100%, 155%
• Finish: Anthracite powder coat
• Included Hardware: Greasable polyurethane bushings and heavy-duty brackets
• Manufacturer Part Number: 22441R

Fits select 2008-2020 Nissan 370Z and Infiniti G35/G37 (RWD) models.

Enhance the cornering precision and chassis balance of your vehicle with the Hotchkis Sport Suspension front sport sway bar (MPN 22441F). This 35mm (1-3/8 inch) tubular bar is engineered to increase front roll stiffness, providing quicker turn-in response and significantly reduced body roll. By neutralizing factory understeer, this upgrade allows for more balanced handling and increased front-end traction during aggressive cornering.

The lightweight hollow design maintains high torsional strength without adding excessive weight. This bar is finished in a durable anthracite powder coat for long-term corrosion resistance and includes greasable polyurethane bushings and heavy-duty brackets for a straightforward bolt-on installation using factory mounting points.

• Diameter: 35mm (1-3/8 in.) lightweight hollow tubing
• Stiffness: +230% over stock G37 / +205% over stock G37S
• Finish: Durable anthracite powder coat
• Hardware: Includes greasable polyurethane bushings and heavy-duty brackets
• Fitment Note: Specifically designed for Rear-Wheel Drive (RWD) models; does not fit AWD applications.