Fits 2019-2026 Mercedes-Benz Sprinter 3500 Base models. This Hellwig rear sway bar (MPN: 7777) is an essential upgrade for Sprinter owners dealing with the instability and body roll common in high-roof or heavily loaded dually vans. By replacing or supplementing the factory bar with a larger-diameter, 1.5-inch solid chromoly component, this kit significantly increases roll stiffness for improved cornering stability and safety in heavy tow/haul conditions.

Precision-engineered from heat-treated 4140 chromoly steel, the bar is designed to handle the high stress of commercial and RV applications. It bolts directly to the factory mounting points with included hardware, providing an immediate improvement in steering response and driver comfort without compromising ride quality.

• Part Number: 7777
• Bar Diameter: 1-1/2 inch (1.5")
• Material: Solid, heat-treated chromoly steel
• Reduces body roll and improves stability in crosswinds and corners
• Direct bolt-on installation with included hardware
• Manufacturer Limited Lifetime Warranty

Fits select 2018-2025 Jeep Wrangler JL and Wrangler Unlimited models, including Sport, Sahara, Rubicon, and 4xe variants.

The Hellwig 7775 rear sway bar is a heavy-duty suspension upgrade engineered to significantly reduce body roll and improve lateral stability. Manufactured from 7/8-inch solid, heat-treated chromoly steel, this bar provides the increased stiffness necessary to handle the higher center of gravity found in modern Wranglers, especially when loaded with gear or towing. The adjustable rate design allows owners to fine-tune the rear roll stiffness to balance the vehicle for different terrain or load conditions, providing a more confident feel through corners and during high-speed maneuvers.

• Part Type: Rear Sway Bar
• Diameter: 7/8 inch
• Material: Solid heat-treated chromoly steel
• Rate: Adjustable for customized handling
• Installation: Bolt-on replacement for factory hardware
• Manufacturer Part Number: 7775
• Warranty: Limited Lifetime Warranty

Fits select 2014-2021 Infiniti QX80 and Nissan Armada (Base, Limited, Luxe, Midnight Edition, Platinum, Platinum Reserve, S, SL, and SV). This 1-1/8 inch solid rear sway bar from Hellwig (MPN 7769) is engineered to significantly reduce body roll and improve lateral stability. By increasing the roll stiffness of the rear suspension, this bar provides more predictable handling and improved safety during high-speed cornering and emergency maneuvers.

Constructed from heat-treated 4140 chromoly steel, the solid-core design offers superior strength and consistent performance under the extreme loads found in heavy towing or hauling applications. The increased diameter over the stock component ensures your SUV remains level and controlled. This kit is designed for a direct-fit upgrade and reuses the factory end links to maintain correct suspension geometry.

• Bar Diameter: 1-1/8 inch (1.125 in)
• Material: Solid heat-treated 4140 chromoly steel
• Application: Rear suspension
• Function: Reduces body roll and improves stability in tow/haul conditions
• Installation: Reuses factory end links
• Finish: Durable powder coat
• Warranty: Manufacturer Limited Lifetime Warranty
• Part Number: 7769

Fits 2014-2025 Ram ProMaster 1500, 2500, and 3500 (All trims).

Designed to combat the body roll and instability common in high-profile commercial vans, the Hellwig 7768 rear sway bar significantly improves handling, comfort, and safety. This upgrade is particularly effective for vehicles used in heavy tow/haul applications or those converted into campers, where a high center of gravity can compromise stability.

This sway bar is forged from solid, heat-treated 4140 chromoly steel, providing superior stiffness and durability compared to stock components. The adjustable rate design allows fleet operators and van owners to fine-tune the suspension to their specific load requirements, ensuring flatter cornering and better weight distribution in both daily driving and demanding towing conditions.

• Replaces or upgrades factory rear sway bar for improved lateral stability
• Material: Solid, heat-treated 4140 chromoly steel
• Diameter: 1-1/8 inch
• Adjustable rate for custom suspension tuning
• Bolts to factory mounting points with included hardware
• Finish: Durable powder coat for long-term corrosion resistance
• Manufacturer Part Number: 7768
• Limited Lifetime Warranty

Fits select 2014-2025 Ram 3500 and 2014-2017 Ram ProMaster 1500, 2500, and 3500.

Improve your vehicle's stability and cornering performance with the Hellwig 7767 rear sway bar. Engineered from solid, heat-treated chromoly steel, this 1-1/4 inch diameter bar significantly increases roll stiffness. This upgrade is essential for maintaining control during heavy tow/haul conditions and provides a more planted, confident feel during everyday driving by reducing body roll and improving weight distribution across the rear axle.

• Manufactured from solid, heat-treated 4140 chromoly steel for maximum durability
• 1.25-inch bar diameter increases stiffness over factory components
• Adjustable rate design allows for fine-tuning based on your load and driving style
• Designed to reuse factory end links for a straightforward installation
• Corrosion-resistant finish for long-lasting protection
• Manufacturer Part Number: 7767
• Includes Limited Lifetime Warranty

Fits select 2016-2026 Ford Transit-350 and Transit-350 HD models. This Hellwig rear sway bar is a vital suspension upgrade for Transit owners who demand better handling, especially under heavy tow/haul conditions. Engineered to replace or supplement factory components, this 1-3/8 inch diameter bar significantly reduces body roll and increases lateral stiffness, providing a more stable and controlled driving experience through corners and in crosswinds.

Manufactured from solid, heat-treated chromoly steel, this sway bar is built for durability and long-term performance. The adjustable rate design allows you to fine-tune the suspension's resistance to suit your specific load requirements. This kit is designed for a straightforward bolt-on installation and is engineered to reuse the factory end links for maximum compatibility.

• Part Number: 7766
• Material: Solid, heat-treated chromoly steel
• Diameter: 1-3/8 inch
• Position: Rear
• Features: Adjustable rate for custom tuning
• Hardware: Reuses factory end links; includes all other necessary mounting components
• Warranty: Limited Lifetime Warranty

Fits 2017-2026 Ford F-250 and F-350 Super Duty models (King Ranch, Lariat, Limited, Platinum, XL, XLT).

Designed to address the handling challenges of heavy-duty trucks, the Hellwig 7761 rear sway bar is a critical upgrade for owners who frequently tow or haul heavy loads. While most Ford Super Duty trucks come with factory stabilization, the OEM components are often undersized for maximum GVWR scenarios. This 1-1/4 inch solid rear sway bar significantly increases roll stiffness, reducing body roll and improving lateral stability through corners and during high-wind highway driving.

Manufactured from high-strength, heat-treated 4140 chromoly steel, this bar provides consistent performance without losing its rate over time. The solid construction and precision-engineered mounting hardware ensure a direct fit to the vehicle's chassis, providing immediate improvements in steering response and driver confidence. The kit includes all necessary hardware and bushings for a straightforward bolt-on installation.

• Replaces or upgrades factory rear sway bar for improved stability
• Reduces body roll for better handling and comfort while towing
• Manufactured from solid 1.25-inch heat-treated chromoly steel
• Durable powder-coated finish for corrosion resistance
• Includes high-quality mounting hardware and bushings
• Manufacturer Part Number: 7761
• Limited Lifetime Warranty

Fits 1997-2006 Jeep Wrangler models including SE, Sahara, Sport, X, Rubicon, and Unlimited.

The Hellwig 7750 front sway bar is a high-performance handling upgrade designed to significantly reduce body roll and improve cornering stability. Constructed from 1-1/4 inch solid, heat-treated 4140 chromoly steel, this bar provides superior stiffness compared to factory equipment, making it an essential modification for lifted Jeeps, heavy tow/haul conditions, or simply improving everyday drivability. The adjustable rate design allows you to fine-tune your suspension's response to match your specific driving style and vehicle load.

• Diameter: 1-1/4 inch solid bar
• Material: Heat-treated chromoly steel for maximum tensile strength
• Installation: Quick bolt-on installation to factory mounting points
• Adjustability: Adjustable rate for customized handling control
• Durability: Engineered for increased comfort, safety, and reduced sway
• Warranty: Limited Lifetime Warranty
• Manufacturer Part Number: 7750

Fits select 2015-2022 Chevrolet Colorado and GMC Canyon mid-size trucks.

Improve the handling and stability of your truck with the Hellwig 7745 rear sway bar. While factory suspension often struggles with the lateral forces generated during cornering or when hauling heavy loads, this 1-inch solid sway bar significantly increases roll stiffness. By better distributing weight across the tires, it reduces body roll and improves driver control during both everyday commuting and demanding tow/haul conditions.

This sway bar is manufactured from high-strength, heat-treated chromoly steel for maximum durability and consistent performance. The solid construction ensures it can withstand the stresses of off-road use on trims like the ZR2 and AT4, or the heavy tongue weights associated with towing on the Denali and Z71 models. It features a direct bolt-on design for a straightforward installation using precision-engineered hardware.

• Reduces body roll and improves cornering traction
• Enhances safety and comfort during towing and hauling
• Solid, heat-treated chromoly steel construction
• Includes all necessary mounting hardware and bushings
• Manufacturer Part Number: 7745
• Limited Lifetime Warranty

• Diameter: 1 inch
• Material: Heat-treated 4140 chromoly
• Type: Solid
• Finish: Powder coated
• Position: Rear

Fits 2016-2023 Toyota Tacoma 2WD and 4WD models with 0-2" of rear lift.

The Hellwig 7744 rear sway bar is a precision-engineered suspension upgrade designed to significantly reduce body roll and improve cornering stability. Unlike factory bars that may struggle under heavy tow or haul loads, this solid, heat-treated chromoly bar provides the necessary stiffness for a more controlled driving experience. The adjustable rate design allows you to fine-tune the suspension response to your specific driving style or cargo demands.

This kit is designed to bolt onto factory mounting points, though drilling may be required for specific submodels. It is a critical upgrade for Tacoma owners looking to enhance safety and handling during everyday commutes or while navigating challenging terrains with a loaded bed.

• Manufacturer Part Number: 7744
• Material: Solid, heat-treated 4140 chromoly steel
• Bar Diameter: 3/4 inch
• Application: Rear suspension
• Fits 0-2" lift heights
• Adjustable rate for custom suspension tuning
• Reduces body roll and improves towing stability
• Limited Lifetime Warranty

Fits 2015-2020 Ford F-150 2WD and 4WD models, including XL, XLT, Lariat, King Ranch, Platinum, Limited, Raptor, SSV, and Police Responder.

The Hellwig 7743 rear sway bar is a vital handling upgrade for F-150 owners who tow, haul, or simply want better cornering performance. While factory sway bars often fall short under heavy loads, this 1-inch diameter solid rear bar provides the lateral stiffness needed to significantly reduce body roll and improve weight distribution across your tires. The result is a flatter, more composed ride through corners and increased stability in crosswinds or while passing heavy vehicles.

Each Hellwig sway bar is manufactured from solid 4140 chromoly steel and is heat-treated for maximum durability and consistent spring rate. Designed for a direct bolt-on installation, this kit is specifically engineered to clear rear-end components on trucks with stock height or up to a 2-inch rear lift.

• Part Number: 7743
• Bar Diameter: 1.00 inch
• Material: Solid heat-treated 4140 chromoly steel
• Position: Rear
• Fitment: Fits 2WD/4WD with 0-2" rear lift
• Finish: Powder-coated for corrosion resistance
• Installation: Bolt-on with included heavy-duty hardware
• Warranty: Limited Lifetime Warranty

Fits 2014-2025 Ram 2500 4WD models across all trims including Power Wagon, Rebel, Tradesman, and Laramie.

Upgrade your heavy-duty truck's handling with the Hellwig 7741 front sway bar. Specifically engineered for the Ram 2500, this 1-3/8 inch diameter sway bar is manufactured from solid, heat-treated chromoly steel. It is designed to significantly reduce body roll and sway, providing a more stable and controlled driving experience whether you are navigating highway corners or managing heavy tow/haul loads.

This sway bar serves as a direct replacement for the often-undersized factory unit, utilizing larger-than-stock diameters to increase roll stiffness. The installation is a straightforward bolt-on process that reuses the factory end links for efficiency and ease of fitment.

• Part Number: 7741
• Diameter: 1-3/8 inch (35mm)
• Material: Solid, heat-treated 4140 chromoly steel
• Installation: Quick bolt-on design; reuses factory end links
• Benefits: Improved cornering traction, reduced body roll, and enhanced towing safety
• Warranty: Limited Lifetime Warranty

Fits 2014-2025 Ram 3500 2WD/4WD models equipped with the 6.7L Diesel engine.

The Hellwig 7739 rear sway bar is a vital handling upgrade for heavy-duty trucks that face the high lateral forces of towing and hauling. While the Ram 3500 is built for heavy work, the factory suspension often allows for excessive body roll that can compromise stability and driver confidence. This solid 1-1/8 inch diameter sway bar significantly increases roll stiffness, providing more predictable handling through corners and better weight distribution in heavy-tow conditions.

• Construction: Manufactured from solid, heat-treated 4140 chromoly steel for exceptional strength and longevity.
• Diameter: 1-1/8 inch (1.125") solid bar replaces or upgrades the factory unit.
• Installation: Direct bolt-on design engineered for a precise fit with included high-quality mounting hardware.
• Handling: Reduces body roll and improves stability during cornering, lane changes, and heavy towing.
• Finish: Durable hammertone powder coat finish for superior corrosion and abrasion resistance.
• Manufacturer Part Number: 7739
• Warranty: Limited Lifetime Warranty.

Fits 2014-2025 Ram 2500 2WD and 4WD models (all submodels including Power Wagon and Rebel).

The Hellwig 7738 rear sway bar is a high-performance handling upgrade specifically engineered for the heavy-duty demands of the Ram 2500. This solid 1-1/8 inch diameter bar is manufactured from heat-treated chromoly steel to provide significantly higher roll stiffness compared to factory equipment. By reducing body roll, this bar improves cornering stability, passenger comfort, and driver confidence, particularly when the vehicle is under heavy tow/haul loads.

Designed for straightforward installation, this adjustable-rate sway bar is engineered to bolt onto factory mounting points and reuses the existing factory end links. It is a vital upgrade for truck owners who use their vehicles as daily drivers or for frequent towing, providing better weight distribution through turns and reducing the "top-heavy" sensation typical of heavy-duty trucks.

• Material: Solid, heat-treated chromoly steel
• Bar Diameter: 1.125 in (1-1/8 in)
• Adjustability: Adjustable rate for fine-tuning handling
• Hardware: Reuses factory end links; includes all necessary mounting hardware
• Part Number: 7738
• Warranty: Limited Lifetime Warranty

Fits select 2014-2018 Chevrolet Silverado 1500 and GMC Sierra 1500 2WD/4WD models.

Improve the handling and stability of your pickup with the Hellwig 7735 rear sway bar. While most 1500-series trucks are equipped with a front sway bar, many lack a rear bar from the factory, leading to excessive body roll and an unsettled feeling when cornering, towing, or hauling heavy loads. This solid 1-1/8 inch diameter sway bar is engineered to increase roll stiffness, providing more neutral handling and improved driver confidence in both everyday and high-demand conditions.

Manufactured from high-strength, heat-treated chromoly steel, this bar is designed for durability and consistent performance. The kit features a direct bolt-on installation, mounting to existing points on the vehicle for a straightforward upgrade in the shop or driveway.

• Replaces or adds a rear sway bar to reduce body roll and improve cornering
• 1-1/8 inch (28.5mm) solid diameter for increased torsional stiffness
• Constructed from heat-treated 4140 chromoly steel for maximum strength
• Includes all necessary heavy-duty mounting hardware and bushings
• Finish: Durable black powder coat
• Manufacturer Part Number: 7735
• Limited Lifetime Warranty

Fits 2005-2023 Toyota Tacoma models including Base, Pre Runner, X-Runner, SR, SR5, TRD Sport, TRD Off-Road, TRD Pro, and Limited.

The Hellwig 7719 front sway bar is a precision-engineered handling upgrade designed to significantly reduce body roll and improve cornering stability. Constructed from 1-3/8 inch solid, heat-treated chromoly steel, this bar provides the increased stiffness necessary to handle modern load and tow demands that factory suspension often cannot accommodate.

• Solid, heat-treated chromoly steel construction for superior strength and durability
• 1-3/8 inch diameter provides a substantial increase in roll stiffness over stock components
• Improves everyday drivability and stability under heavy tow/haul conditions
• Direct bolt-on installation designed to reuse factory end links
• Includes Limited Lifetime Warranty
• Manufacturer Part Number: 7719

Whether you are navigating tight corners or hauling heavy gear, this high-performance sway bar is an essential investment for Tacoma owners looking to improve vehicle comfort and safety on the road.

Fits 2008-2022 Ford E-150, E-250, and E-350 Super Duty models. This Hellwig front sway bar is a heavy-duty handling upgrade designed to significantly reduce body roll and improve vehicle stability under heavy loads or towing conditions.

Engineered for high-stress applications, this sway bar is manufactured from solid 1-3/8 inch diameter 4140 chromoly steel. Each bar is heat-treated to maximize stiffness and durability, providing more consistent handling through corners and reduced driver fatigue during long hauls. The increased diameter over the factory equipment ensures better weight distribution and flatter cornering without sacrificing ride quality.

• Part Number: 7718
• Diameter: 1-3/8 inch (1.375")
• Material: Solid, heat-treated 4140 chromoly steel
• Installation: Direct bolt-on; reuses factory end links
• Finish: Durable powder coat
• Warranty: Limited Lifetime Warranty

This kit includes all necessary mounting hardware and high-quality bushings required for installation. It is an essential upgrade for fleet vehicles, ambulances, and RVs built on the Ford E-Series chassis.

Fits select 2011-2026 Ford F-250 and F-350 Super Duty 4WD trucks.

Upgrade your Super Duty’s handling and stability with the Hellwig 7712 Front Sway Bar. Engineered specifically for the demands of heavy towing and hauling, this 1-5/16 inch diameter bar significantly reduces body roll and improves cornering control. Unlike smaller factory bars that can struggle under heavy loads, this solid, heat-treated chromoly bar provides the increased stiffness needed for a more composed and confident driving experience on both the highway and the job site.

• Part Number: 7712
• Material: Solid heat-treated 4140 chromoly steel
• Diameter: 1-5/16 inch
• Position: Front
• Reuses factory end links for a straightforward bolt-on installation
• Finish: High-quality powder coat for corrosion resistance
• Includes precision-engineered mounting hardware and bushings
• Limited Lifetime Warranty

This heavy-duty sway bar is a direct replacement for the original equipment, designed to optimize weight distribution and tire contact during lateral maneuvers. Whether you are navigating tight mountain passes with a fifth-wheel or looking for better everyday drivability, Hellwig sway bars deliver professional-grade suspension tuning.

Fits select 2010-2012 Dodge and Ram 2500/3500 trucks (6.7L).

The Hellwig 7710 Rear Sway Bar is an essential suspension upgrade for heavy-duty trucks, specifically engineered to manage the high center of gravity and increased loads common in 2500 and 3500 series pickups. By increasing the roll stiffness of the rear suspension, this sway bar significantly reduces body roll during cornering and improves lateral stability when towing or hauling heavy payloads.

Crafted from solid 4140 chromoly steel, each bar is heat-treated to ensure maximum strength and durability under the high-stress conditions of diesel applications. The 1-1/8 inch diameter provides a substantial increase in stiffness over factory components, leading to more predictable handling and improved driver confidence on both highways and winding roads.

• Manufacturer Part Number: 7710
• Diameter: 1-1/8 inch
• Material: Solid, heat-treated chromoly steel
• Position: Rear
• Installation: Bolt-on design for straightforward fitment
• Reduces body roll and improves weight distribution
• Enhances stability during heavy towing and hauling
• Includes all necessary mounting hardware
• Limited Lifetime Warranty

Fits select 2009-2026 Dodge and Ram 1500 2WD/4WD models.

The Hellwig 7709 rear sway bar is a precision-engineered suspension upgrade designed to significantly reduce body roll and improve lateral stability. Whether navigating tight corners or managing heavy loads while towing, this bar increases the vehicle's roll stiffness for a more controlled and predictable driving experience. By replacing or supplementing the factory rear bar with a larger-diameter, solid heat-treated chromoly unit, you ensure better tire contact and more balanced handling across all driving conditions.

• 7/8-inch (0.875") diameter solid heat-treated 4140 chromoly steel construction
• Adjustable rate design to fine-tune suspension response for your specific load
• Reduces body roll and improves safety during everyday driving and heavy tow/haul scenarios
• Durable finish for long-lasting corrosion resistance
• Engineered for a direct bolt-on installation using factory mounting points
• Reuses factory end links; vehicles without factory end links require Hellwig P/N 7961
• Manufacturer Part Number: 7709
• Limited Lifetime Warranty

Fits select 2009-2019 Dodge and Ram 1500 2WD models.

Improve your truck's handling and stability with the Hellwig 7708 front sway bar. Engineered to mitigate the excessive body roll common in modern trucks, this 1-1/2 inch diameter sway bar provides the increased stiffness required for safe, confident cornering and better control during heavy tow/haul conditions. It is a direct bolt-on upgrade that replaces the often insufficient factory bar with a heavy-duty solution.

Constructed from solid, heat-treated chromoly steel, this sway bar is built for exceptional durability and consistent performance. The kit is designed for a straightforward installation that reuses the factory end links, ensuring a precise fit on your suspension system.

• Material: Solid, heat-treated chromoly steel
• Diameter: 1-1/2 inches (38.1mm)
• Installation: Bolt-on replacement; reuses factory end links
• Finish: Durable powder-coat
• Warranty: Limited Lifetime Warranty
• Part Number: 7708

Fits select 2007-2014 Cadillac Escalade, Chevrolet Avalanche, Suburban 1500, and Tahoe, and GMC Yukon/Yukon XL 1500 models. This Hellwig rear sway bar is a high-performance handling upgrade designed to significantly reduce body roll and improve cornering stability.

Engineered to replace thin or hollow factory bars, the Hellwig 7707 is manufactured from solid 1-1/4 inch diameter 4140 chromoly steel. This heat-treated construction provides the increased torsional stiffness required for heavy towing, hauling, or spirited driving. The result is a more planted feel, improved tire contact, and better driver control through every turn. This bar is a direct bolt-on solution using existing mounting points and precision-engineered hardware.

• Replaces factory rear sway bar with a larger 1-1/4 inch solid diameter
• Manufactured from heat-treated 4140 chromoly steel for maximum durability
• Reduces body roll and increases vehicle stability during cornering and towing
• Bolts directly to factory mounting locations for straightforward installation
• Includes all necessary hardware and bushings
• Limited Lifetime Warranty
• Manufacturer Part Number: 7707

Fits 2007-2018 Jeep Wrangler and Wrangler Unlimited JK models.

Upgrade your vehicle’s handling and stability with the Hellwig 7706 rear sway bar. Designed to replace thin, insufficient factory bars, this 7/8-inch diameter upgrade significantly increases roll stiffness. By reducing body roll during cornering and lateral weight transfer, it provides a more controlled, confident driving experience whether you are navigating daily traffic or managing heavy tow/haul conditions.

Each bar is manufactured from high-strength, solid 4140 chromoly steel and undergoes a specialized heat-treatment process to ensure long-lasting durability and consistent performance. The direct bolt-on design allows for a straightforward installation using existing factory mounting points.

• Replaces undersized OE bars to optimize handling and reduce body roll
• Constructed from 7/8-inch solid, heat-treated chromoly steel
• Improves steering response and cornering safety
• Direct bolt-on installation with included hardware
• Limited Lifetime Warranty
• Manufacturer Part Number: 7706

Fits 2007-2014 Ford F-150 2WD and 4WD models (all trims including SVT Raptor and Harley-Davidson Edition).

The Hellwig 7705 rear sway bar is a high-performance suspension upgrade designed to significantly reduce body roll and improve cornering stability. Specifically engineered for the 2007-2014 Ford F-150, this bar provides the extra stiffness required for modern towing and hauling demands without sacrificing everyday ride quality. Constructed from solid, heat-treated 4140 chromoly steel, it offers superior durability and tensile strength compared to hollow or standard steel alternatives.

• Replaces or upgrades factory rear sway bar for improved handling and safety
• Manufactured from 1-1/8 inch (1.125") solid heat-treated chromoly steel
• Precision engineered for a direct bolt-on installation
• Reduces lateral weight transfer and improves tire contact patches
• Ideal for heavy loads, towing, and high-center-of-gravity applications
• Includes all necessary mounting hardware and bushings
• Manufacturer Part Number: 7705
• Limited Lifetime Warranty

Fits 2009-2020 Ford F-150 2WD and 4WD models including Raptor, Platinum, and Lariat trims.

The Hellwig 7704 front sway bar is a high-performance handling upgrade designed to significantly reduce body roll and improve lateral stability. While most Ford F-150s come with a factory-installed sway bar, they are often undersized for the demands of heavy towing, hauling, or spirited driving. This 1-1/2 inch diameter sway bar is engineered to provide increased stiffness, ensuring the vehicle remains level and composed through corners and during sudden maneuvers.

Constructed from solid, heat-treated 4140 chromoly steel, this bar offers superior strength and durability compared to hollow or standard steel alternatives. It is a direct bolt-on replacement that reuses factory end links, making it a straightforward installation for enthusiasts looking to enhance their truck's safety and comfort under load.

• Part Number: 7704
• Bar Diameter: 1-1/2 inch (38mm)
• Material: Solid heat-treated 4140 chromoly steel
• Installation: Quick bolt-on design, reuses factory end links
• Finish: Durable powder coat
• Warranty: Limited Lifetime Warranty

Fits select 1999-2007 Chevrolet Silverado/GMC Sierra 1500 & 2500, Tahoe, Yukon, Suburban, Avalanche, and Cadillac Escalade models.

Upgrade your vehicle's handling and stability with the Hellwig 7702 front sway bar. Designed specifically to combat body roll and improve cornering traction, this sway bar is an essential upgrade for heavy-duty trucks and SUVs, particularly those used for towing or hauling heavy loads. By increasing the front roll stiffness, this bar provides a more controlled, planted feel during lane changes and tight maneuvers.

Each bar is manufactured from high-quality 4140 chromoly steel and is heat-treated to ensure consistent performance and long-term durability. The 1-3/8" solid diameter provides significantly more resistance to torsion than thin-walled factory bars. This kit is engineered for a straightforward bolt-on installation, utilizing precision-engineered components for a perfect fit.

• Part Number: 7702
• Position: Front
• Diameter: 1-3/8" (1.375 in)
• Construction: Solid heat-treated 4140 chromoly steel
• Installation: Bolt-on with included hardware
• Features: Reduced body roll and improved driver control
• Warranty: Limited Lifetime Warranty

Fits 2000-2006 Toyota Tundra Base, Limited, and SR5 (2WD/4WD).

The Hellwig 7700 rear sway bar is an essential suspension upgrade designed to significantly improve the handling and stability of your first-generation Tundra. By increasing the roll stiffness of the rear suspension, this bar effectively reduces body roll during cornering and minimizes the side-to-side sway often experienced during heavy towing or hauling. It provides a more controlled, confident feel whether the truck is empty or fully loaded.

Engineered for durability and performance, this sway bar is manufactured from solid, heat-treated chromoly steel. The 1-1/8 inch diameter offers a substantial increase in stiffness over factory components. The kit is designed for a straightforward bolt-on installation, utilizing precision-engineered hardware to ensure a proper fit on both 2WD and 4WD configurations.

• Manufacturer Part Number: 7700
• Bar Diameter: 1-1/8 inch
• Material: Solid heat-treated chromoly steel
• Vehicle Fitment: 2000-2006 Toyota Tundra (All Trims)
• Installation: Direct bolt-on with included hardware
• Warranty: Limited Lifetime Warranty

Fits select 2000-2006 Toyota Tundra and 2001-2007 Toyota Sequoia (all trims).

The Hellwig 7697 front sway bar is a high-performance handling upgrade designed to correct the body roll and vague steering response common in first-generation Tundra and Sequoia platforms. Engineered for trucks that see daily use, heavy hauling, or towing duty, this bar provides the increased torsional stiffness required to keep the vehicle level through corners and stable under load.

Construction features 1-1/4 inch solid, heat-treated 4140 chromoly steel for maximum strength and durability. This sway bar is a direct-fit component that reuses factory end links, making for a straightforward bolt-on installation. By replacing the undersized factory bar with Hellwig’s larger diameter solid chromoly unit, you gain immediate improvements in cornering traction, driver comfort, and safety.

• 1.25-inch solid heat-treated chromoly steel construction
• Engineered to reduce body roll and improve lateral stability
• Optimized for everyday drivability and heavy-duty towing/hauling
• Direct bolt-on design reuses factory end links
• Includes precision-engineered mounting hardware and bushings
• Manufacturer Part Number: 7697
• Limited Lifetime Warranty

Fits select 2007-2026 Ford Expedition and 2007-2024 Lincoln Navigator models.

Enhance the handling and stability of your full-size SUV with the Hellwig 7696 Front Sway Bar. Engineered specifically for the Ford Expedition and Lincoln Navigator platforms, this 1-1/2 inch diameter bar significantly reduces body roll during cornering and improves tracking during heavy towing or hauling. Unlike thinner factory bars, this solid chromoly unit is heat-treated for maximum tensile strength and durability under high-stress loads.

This front sway bar provides an immediate improvement in steering response and lateral stability, making the vehicle feel more composed on winding roads and more stable in crosswinds. The bolt-on design allows for a straightforward installation that reuses the factory end links while providing a significant upgrade in roll stiffness.

• Material: Solid heat-treated 4140 chromoly steel for superior strength
• Diameter: 1-1/2 inch (1.5") solid construction
• Hardware: Includes high-durometer polyurethane bushings and mounting brackets
• Installation: Direct bolt-on; reuses factory end links
• Durability: Powder-coated finish for long-term corrosion resistance
• Manufacturer Part Number: 7696

Whether you are navigating daily traffic or managing a heavy trailer, this sway bar is a critical upgrade for maintaining control and safety in a high-profile vehicle.

Fits select 2007-2021 Toyota Tundra 2WD and 4WD models, including Base, SR, SR5, Limited, Platinum, 1794 Edition, TRD Pro, Trail, and Nightshade.

The Hellwig 7692 Rear Sway Bar is a premium handling upgrade designed to significantly reduce body roll and improve lateral stability. Engineered specifically for the Toyota Tundra, this 1-1/8 inch diameter bar is manufactured from solid, heat-treated chromoly steel for superior torsional strength. Whether you are navigating daily commutes or managing heavy tow/haul conditions, this adjustable-rate sway bar enhances cornering control and overall vehicle safety by distributing weight more evenly across the tires.

• Constructed from 1-1/8 inch solid, heat-treated chromoly steel
• Adjustable rate design for fine-tuned handling characteristics
• Direct bolt-on installation for improved drivability and towing stability
• Increases stiffness to minimize body roll in corners and heavy loads
• Includes installation instructions for a precise fit
• Manufacturer Part Number: 7692
• Limited Lifetime Warranty