Fits select 2007-2026 Ford Expedition and Lincoln Navigator models (2WD/4WD).

The Hellwig 7688 rear sway bar is a high-performance handling upgrade designed to significantly reduce body roll and improve cornering stability. Manufactured from 7/8-inch solid heat-treated chromoly steel, this sway bar is engineered to replace or upgrade factory components that often struggle with the increased weight of modern towing and hauling demands. By increasing the roll stiffness of the rear suspension, this bar provides a more planted feel, better tire contact, and increased driver confidence during everyday driving or while towing heavy loads.

• Part Number: 7688
• Diameter: 7/8-inch solid construction
• Material: Heat-treated 4140 chromoly steel
• Installation: Direct bolt-on design using factory mounting points
• Reduces body roll and improves weight distribution in corners
• Ideal for vehicles used for towing, hauling, or high-occupancy transport
• Limited Lifetime Warranty

Fits select 2007-2020 Cadillac Escalade, Chevrolet Avalanche, Silverado 1500, Suburban, Tahoe, and GMC Sierra/Yukon models.

The Hellwig 7685 front sway bar is an essential handling upgrade for GM truck and SUV owners seeking to reduce body roll and improve cornering stability. While factory bars are often undersized for modern towing and hauling demands, this 1.5-inch diameter unit provides the increased stiffness necessary for better vehicle control and safety. It is particularly effective for heavy-duty applications, ensuring the vehicle stays flatter through corners and maintains better tracking on the highway.

Constructed from solid, heat-treated 4140 chromoly steel, this sway bar is built for maximum strength and long-term durability. The design allows for a direct bolt-on installation, mounting to factory locations and reusing the original end links for a seamless fit. This upgrade delivers immediate results in steering response and handling, whether for everyday driving or heavy-duty towing.

• Manufacturer Part Number: 7685
• Bar Diameter: 1-1/2 inch (1.5")
• Bar Type: Solid heat-treated chromoly steel
• Installation: Direct bolt-on; reuses factory end links
• Improves handling, comfort, and safety under load
• Limited Lifetime Warranty

Fits 1999-2010 Ford F-250 and F-350 Super Duty (2WD/4WD) models.

Standard factory sway bars are often inadequate for the heavy-duty demands of a Super Duty truck, particularly when towing or hauling heavy payloads. The Hellwig 7677 rear sway bar is engineered to significantly reduce body roll and improve lateral stability. By increasing the roll stiffness of the rear suspension, this upgrade provides more predictable handling, better cornering traction, and a more controlled ride on the highway.

Constructed from 1-1/4 inch solid heat-treated chromoly steel, this sway bar is built to withstand the stresses of heavy towing. The precision-engineered design ensures a direct bolt-on installation using factory mounting locations where possible, making it a straightforward upgrade for any DIYer or professional technician looking to enhance vehicle safety and driver comfort.

• Diameter: 1-1/4 inch
• Material: Solid heat-treated 4140 chromoly steel
• Finish: Durable powder coat
• Reduces body roll and improves cornering stability
• Designed specifically for heavy towing and hauling applications
• MPN: 7677
• Limited Lifetime Warranty

Fits 2005-2007 Ford F-250 and F-350 Super Duty 4WD trucks (all trims).

The Hellwig 7676 front sway bar is a high-performance handling upgrade designed to combat body roll and improve stability under heavy load or towing conditions. Engineered from solid, heat-treated 4140 chromoly steel, this 1-1/8 inch diameter bar provides significantly higher torsional stiffness compared to factory equipment. This ensures flatter cornering and more predictable steering response without sacrificing ride quality during everyday driving.

• Manufacturer Part Number: 7676
• Material: Solid heat-treated 4140 chromoly steel
• Diameter: 1-1/8 inch (28.575mm)
• Installation: Direct bolt-on; reuses factory end links
• Finish: Durable black powder coat
• Warranty: Limited Lifetime Warranty

Each kit includes all necessary heavy-duty mounting hardware and polyurethane bushings for a complete installation. This sway bar is specifically designed for 4WD models to maintain proper clearance and suspension geometry.

Fits 2000-2005 Ford Excursion Eddie Bauer, Limited, XLS, and XLT models.

The Hellwig 7643 Rear Sway Bar is a vital handling upgrade designed to combat the body roll and instability common in the Ford Excursion, especially during heavy towing or hauling conditions. By increasing the rear roll stiffness, this bar improves cornering traction and steering response while maintaining everyday drivability and comfort.

This sway bar is manufactured from 1-1/4 inch solid, heat-treated chromoly steel for maximum durability and resistance to fatigue. Featuring an adjustable rate design, it allows you to fine-tune the suspension's stiffness to match your vehicle's load and your personal driving preferences. The kit is engineered for a precise bolt-on installation to factory mounting points.

• Manufacturer Part Number: 7643
• Bar Diameter: 1.25 inches (1-1/4 in)
• Material: Solid, heat-treated chromoly steel
• Finish: Powder-coated for corrosion resistance
• Design: Adjustable rate for customized handling
• Reduces body roll for improved safety and comfort in tow/haul conditions
• Limited Lifetime Warranty

Fits select 1999-2007 Ford F-250/F-350 Super Duty and 2000-2005 Ford Excursion models. The Hellwig 7640 front sway bar is a vital handling upgrade engineered to reduce body roll and improve vehicle stability. While factory sway bars often struggle under the demands of modern towing and heavy payloads, this 1-1/2" diameter bar provides increased stiffness to ensure flatter cornering and a more controlled driving experience.

Constructed from high-strength, solid, heat-treated chromoly steel, this sway bar is built to withstand the rigors of heavy-duty use. The bolt-on design allows for a precise fitment and is engineered to reuse factory end links, making it a direct replacement for the undersized original equipment. Whether you are hauling a trailer or navigating mountain passes, this upgrade significantly improves comfort and safety.

• Diameter: 1-1/2 inch
• Material: Solid, heat-treated chromoly steel
• Installation: Reuses factory end links; bolt-on hardware included
• Performance: Reduces body roll and improves steering response
• Warranty: Limited Lifetime Warranty
• Manufacturer Part Number: 7640

Fits select 1997-2021 Chevrolet Express and GMC Savana 2500/3500 models.

The Hellwig 7635 rear sway bar is a vital handling upgrade for heavy-duty vans, engineered to mitigate the body roll and sway common in high-profile vehicles. Forged from solid 1-3/8-inch diameter 4140 chromoly steel, this bar is heat-treated to maximize torsional strength and resilience. It provides an immediate improvement in stability, whether you are navigating highway crosswinds or managing heavy loads in tow/haul conditions.

Designed for a direct bolt-on installation, this sway bar utilizes precision-engineered components to integrate with your existing suspension. By increasing the rear roll stiffness, the Hellwig 7635 improves cornering traction and steering response, making the vehicle more predictable and comfortable for both the driver and passengers.

• Manufacturer Part Number: 7635
• Position: Rear
• Diameter: 1-3/8 inches
• Material: Solid, heat-treated 4140 chromoly steel
• Installation: Bolt-on with included hardware
• Warranty: Limited Lifetime Warranty

Fits select 1994-2002 Dodge Ram 1500, 2500, and 3500 trucks (Base, Laramie, LT, SLT, Sport, and ST models).

Enhance the stability and control of your Dodge Ram with the Hellwig 7626 rear sway bar. While factory sway bars provide basic stability, they are often undersized for the demands of heavy towing, hauling, or high-center-of-gravity loads. This 1-1/8 inch diameter bar provides increased roll stiffness, significantly reducing body roll and improving driver confidence through every corner.

Constructed from solid, heat-treated chromoly steel, this sway bar is engineered for long-term durability and consistent performance under load. It serves as an essential handling upgrade for owners looking to improve drivability without sacrificing comfort. Installation is a straightforward bolt-on process, though drilling may be required on some vehicle configurations.

• Part Number: 7626
• Diameter: 1-1/8 inch (1.125")
• Material: Solid, heat-treated chromoly steel
• Finish: Powder-coated for corrosion resistance
• Includes all necessary mounting hardware
• Limited Lifetime Warranty

Fits 1984-2001 Jeep Cherokee XJ (Base, Briarwood, Chief, Classic, Country, Laredo, Limited, Pioneer, SE, and Sport).

Improve the handling and stability of your XJ with the Hellwig 7568 rear sway bar. While the Jeep Cherokee is a versatile platform, the factory suspension often lacks the lateral stiffness required for modern towing, hauling, or spirited driving. This sway bar significantly reduces body roll and improves cornering traction by distributing weight across the axle more effectively.

Manufactured from 3/4-inch solid, heat-treated 4140 chromoly steel, this sway bar offers superior tensile strength compared to standard mild steel alternatives. The increased stiffness provides more predictable steering response and better control in high-wind or heavy-load conditions. The kit is designed as a direct bolt-on upgrade, utilizing precision-engineered components for a secure fit.

• Material: Solid, heat-treated 4140 chromoly steel
• Diameter: 3/4 inch (19mm)
• Hardware: High-quality mounting components included
• Finish: Durable powder coat for corrosion resistance
• Manufacturer Part Number: 7568
• Warranty: Limited Lifetime Warranty

Fits 1988-2000 Chevrolet and GMC C/K/R/V 1500, 2500, and 3500 series trucks, including Silverado and Sierra models.

Engineered to resolve body roll and instability in classic GM truck platforms, the Hellwig 7555 rear sway bar is a critical upgrade for vehicles used in towing, hauling, or daily transit. By increasing the rear roll stiffness, this bar improves cornering traction and steering response while reducing the sway felt from crosswinds and heavy loads. This solid, heat-treated component offers a significant increase in stiffness over stock diameters to optimize vehicle handling and safety.

• Constructed from 1-1/8 inch solid, heat-treated 4140 chromoly steel for maximum strength.
• Designed to replace or augment factory suspension for superior load control and reduced body roll.
• Includes heavy-duty mounting hardware and high-performance bushings for a complete setup.
• Durable finish provides long-lasting protection against road debris and corrosion.
• Bolt-on installation process; drilling may be required for certain chassis configurations.
• Backed by a Manufacturer Limited Lifetime Warranty.
• Manufacturer Part Number: 7555.

Fits 2010-2018 Mercedes-Benz Sprinter 3500 Base models.

The Hellwig 7515 rear sway bar is an essential handling upgrade designed to manage body roll and improve lateral stability in heavy-duty van applications. Built for both 2WD and 4WD configurations, this sway bar replaces or complements factory equipment that often struggles under the high center of gravity and shifting loads common to the Sprinter chassis. By increasing roll stiffness, it improves steering tracking and reduces driver fatigue during cornering and crosswind conditions.

• Manufactured from 1-1/2 inch solid, heat-treated chromoly steel for superior torsional strength.
• Designed for everyday drivability and improved safety during heavy tow/haul conditions.
• Precision-engineered for a direct bolt-on installation using factory mounting points.
• High-quality finish for long-term corrosion resistance in harsh underbody environments.
• Manufacturer Part Number: 7515

Fits select 1983-2010 Ford Bronco, Bronco II, Ranger, and Mazda B2300, B3000, and B4000. This Hellwig rear sway bar is a vital handling upgrade designed to significantly reduce body roll and improve lateral stability during cornering and towing. By replacing or supplementing an undersized factory bar, it provides the increased stiffness needed for modern loads and aggressive driving conditions.

• Manufactured from solid 7/8-inch heat-treated 4140 chromoly steel for maximum torsional strength.
• Precision engineered to improve everyday drivability and safety under heavy tow/haul conditions.
• Direct bolt-on installation using factory mounting points for a straightforward upgrade.
• High-quality finish for long-term corrosion resistance and durability.
• Manufacturer Part Number: 7511
• Limited Lifetime Warranty included.

Fits 2017-2026 Ford F-250 and F-350 Super Duty trucks.

Engineered specifically for heavy-duty towing and hauling applications, the Hellwig Big Wig rear sway bar provides the lateral stability required for high-center-of-gravity loads. While factory sway bars often lack the stiffness needed for max-capacity towing, this 1-5/16 inch diameter bar utilizes solid, heat-treated 4140 chromoly to significantly reduce body roll and improve driver control during cornering and evasive maneuvers. This adjustable-rate bar allows you to fine-tune your suspension response based on your specific payload requirements.

• Forged from 1-5/16 inch solid, heat-treated chromoly steel for maximum torsional strength
• Adjustable rate design allows for customized stiffness levels
• Reduces body roll to improve handling, passenger comfort, and overall safety
• Direct bolt-on installation engineered for a precise fit
• Limited Lifetime Warranty

Specifications:

• Manufacturer Part Number: 7320
• Bar Diameter: 1-5/16 inch
• Material: Solid Heat-Treated Chromoly
• Position: Rear
• Series: Big Wig

Fits 2014-2025 Ram 2500 2WD/4WD models including Big Horn, Laramie, Limited, Power Wagon, Rebel, SLT, and Tradesman.

The Hellwig Big Wig rear sway bar is a heavy-duty handling upgrade specifically engineered for Ram 2500 trucks used for frequent towing and hauling. By increasing the vehicle's roll stiffness, this 1-1/4 inch diameter bar significantly reduces body roll and improves stability during cornering and in high-wind conditions. This bar provides a more controlled, confident feel when the truck is under load, improving both safety and driver comfort.

Constructed from solid, heat-treated 4140 chromoly steel, the Big Wig series offers the largest diameter options available from Hellwig for heavy-duty applications. The adjustable rate design allows for fine-tuning the suspension to match your specific towing requirements. This kit is a direct bolt-on installation and includes all necessary mounting hardware.

• 1-1/4 inch (1.25in) diameter for maximum roll control
• Solid, heat-treated 4140 chromoly steel construction
• Adjustable rate for fine-tuning based on load weight
• Reduces body roll for improved stability during towing and hauling
• Direct bolt-on installation with included hardware
• Manufacturer Part Number: 7306
• Limited Lifetime Warranty

Fits 2014-2025 Ram 3500 (Big Horn, Laramie, Limited, Longhorn, Lone Star, SLT, Special Service, and Tradesman).

The Hellwig Big Wig rear sway bar (MPN 7298) is engineered specifically for heavy-duty towing and hauling applications where stability is critical. Many heavy-duty trucks are not equipped with a factory rear sway bar, resulting in excessive body roll and instability when carrying top-heavy campers or pulling heavy trailers. This oversized 1-5/16" diameter bar provides a massive increase in roll stiffness, significantly improving vehicle control, driver confidence, and passenger comfort through corners and lane changes.

Constructed from solid, heat-treated 4140 chromoly steel, this Big Wig bar is designed to withstand the stresses of maximum-load hauling. The kit features a straightforward bolt-on installation that utilizes existing mounting points for a secure fit. By distributing weight more evenly across the suspension, it reduces the fatigue caused by constant steering corrections in crosswinds or uneven terrain.

• Specifically engineered for heavy-duty towing and hauling stability
• 1-5/16" solid, heat-treated 4140 chromoly steel construction
• Drastically reduces body roll and improves cornering tracking
• Complete bolt-on kit with high-quality mounting hardware
• Manufacturer Part Number: 7298
• Limited Lifetime Warranty

Fits 1999-2010 Ford F-250 and F-350 Super Duty trucks.

The Hellwig Big Wig rear sway bar (MPN 7289) is specifically engineered to solve stability issues in heavy-duty towing and hauling applications. Many Super Duty trucks are not equipped with a factory rear sway bar, leading to excessive body roll and instability when carrying campers or pulling heavy trailers. As the largest diameter sway bar in the Hellwig lineup, the Big Wig significantly increases roll stiffness to improve handling, driver control, and overall safety.

Forged from 1-5/16 inch solid, heat-treated chromoly steel, this component is designed for maximum durability under high-stress loads. The bolt-on installation utilizes precision-engineered hardware to integrate with the vehicle's suspension, providing an immediate improvement in cornering and weight distribution without sacrificing ride quality.

• 1-5/16 inch diameter solid, heat-treated chromoly steel construction
• Optimized for heavy-duty tow and haul applications
• Reduces body roll for better stability and driver confidence
• Direct bolt-on installation to factory mounting points
• Manufacturer Part Number: 7289
• Limited Lifetime Warranty

Fits select 2010-2012 Dodge and Ram 2500 and 3500 heavy-duty trucks.

Specifically engineered for trucks equipped with slide-in campers or heavy towing loads, the Hellwig Big Wig rear sway bar significantly reduces body roll and increases vehicle stability. While many heavy-duty trucks lack a factory rear sway bar, this 1-5/16" diameter upgrade provides the necessary lateral stiffness to improve cornering safety and driver confidence under maximum payload conditions. This sway bar is forged from solid, heat-treated 4140 chromoly steel to ensure long-term durability and resistance to fatigue.

• Part Number: 7272
• Bar Diameter: 1-5/16 inch (33mm)
• Material: Solid, heat-treated 4140 chromoly steel
• Application: Heavy-duty towing and hauling
• Installation: Bolt-on with included heavy-duty mounting hardware
• Finish: Durable hammer-tone powder coat
• Warranty: Limited Lifetime Warranty

By effectively distributing weight across the rear axle, the Hellwig Big Wig ensures your truck stays level during maneuvers, reducing tire wear and improving overall handling balance. This kit includes all necessary bushings and mounting hardware for a direct installation.

Fits 2011-2016 Ford F-250 and F-350 Super Duty trucks. This Hellwig Big Wig rear sway bar is engineered specifically for heavy-duty towing and hauling applications where stability and control are paramount.

Many Ford Super Duty trucks lack a factory rear sway bar, resulting in significant body roll when loaded with a camper or a heavy trailer. The Hellwig Big Wig series features the largest diameter sway bars offered by the manufacturer, utilizing 1-1/4 inch solid, heat-treated chromoly steel to provide maximum roll stiffness. This increased rigidity improves cornering traction, driver comfort, and overall vehicle safety by keeping the truck level under load. The adjustable rate design allows you to fine-tune the suspension stiffness to match your specific hauling requirements.

• Fits 2011-2016 Ford F-250/F-350 Super Duty (King Ranch, Lariat, Platinum, XL, XLT)
• 1-1/4 inch diameter solid, heat-treated 4140 chromoly steel construction
• Adjustable rate for custom-tuned handling
• Direct bolt-on installation with included hardware
• Designed specifically for heavy-duty tow and haul applications
• Limited Lifetime Warranty
• Manufacturer Part Number: 7271

Fits 2011-2019 Chevrolet Silverado 2500 HD/3500 HD and GMC Sierra 2500 HD/3500 HD trucks.

Designed specifically for heavy-duty towing and hauling, the Hellwig Big Wig rear sway bar is a precision-engineered solution for excessive body roll. By utilizing the largest diameter bar available in the Hellwig lineup for these applications, this upgrade significantly improves lateral stability and driver control when the vehicle is under load. The solid, heat-treated chromoly construction provides the necessary stiffness to balance high-center-of-gravity loads like truck campers or heavy fifth-wheel trailers.

This adjustable-rate sway bar allows you to fine-tune the suspension stiffness to match your specific hauling needs. The kit features a direct bolt-on design, mounting to factory points to improve handling, comfort, and safety without sacrificing ride quality on unladen trips.

• Manufacturer Part Number: 7270
• Bar Diameter: 1-5/16 inch
• Construction: Solid, Heat Treated 4140 Chromoly
• Design: Adjustable rate for customized tuning
• Hardware: High-quality mounting components included
• Finish: Durable powder coat
• Warranty: Limited Lifetime Warranty

Fits select 2001-2007 Chevrolet Silverado and GMC Sierra 2500 HD and 3500 trucks (including Classic and HD models).

The Hellwig Big Wig rear sway bar is engineered as the ultimate handling upgrade for heavy-duty trucks tasked with demanding towing and hauling duties. Featuring a massive 1-5/16-inch diameter, this is the largest sway bar offered by Hellwig for this platform. It is specifically designed to provide the increased roll stiffness required to stabilize top-heavy loads and trailers, significantly reducing body roll and improving driver control through every corner.

Constructed from solid, heat-treated 4140 chromoly steel, this sway bar delivers professional-grade durability and performance. It serves as a direct solution for trucks that often lack a factory-equipped rear sway bar, providing an immediate improvement in vehicle stability, comfort, and safety. The kit is designed for a straightforward bolt-on installation, mounting to the vehicle's frame and axle with precision-engineered hardware.

• Part Number: 7269
• Diameter: 1-5/16 inch (33.3mm)
• Material: Solid heat-treated chromoly steel
• Position: Rear
• Installation: Quick bolt-on design
• Warranty: Limited Lifetime Warranty

Fits 1999-2010 Ford F-250 and F-350 Super Duty (XL, XLT, Lariat, King Ranch, FX4, Harley-Davidson Edition, and Cabela's).

The Hellwig Big Wig rear sway bar is engineered specifically for heavy-duty trucks that require maximum stability during towing and hauling applications. Many Super Duty trucks lack a factory rear sway bar, leading to significant body roll and decreased control when under load. This 1-5/16-inch solid chromoly bar is the largest diameter sway bar offered by Hellwig, providing a massive increase in roll stiffness for improved handling, driver comfort, and safety.

Constructed from heat-treated 4140 chromoly steel, this sway bar is built to withstand the rigors of heavy-duty use. The adjustable rate design allows you to fine-tune the suspension to match your specific load requirements. Installation is a straightforward bolt-on process using the included hardware, significantly reducing sway in corners and crosswinds.

• Manufacturer Part Number: 7268
• Bar Diameter: 1-5/16 inch
• Material: Solid, heat-treated 4140 Chromoly steel
• Adjustable rate for customized handling
• Designed for heavy-duty towing and hauling
• Direct bolt-on installation
• Limited Lifetime Warranty

Fits select 2007-2010 Chevrolet Silverado 2500 HD/3500 HD and GMC Sierra 2500 HD/3500 HD (SLE, SLT, LT, LTZ, and WT models).

Engineered specifically for heavy-duty towing and hauling, the Hellwig Big Wig rear sway bar is a critical suspension upgrade for trucks carrying top-heavy loads or pulling large trailers. Most heavy-duty trucks lack a factory rear sway bar, resulting in excessive body roll and instability. The Big Wig series features the largest diameter sway bars offered by Hellwig, significantly increasing roll stiffness for improved driver control, safety, and comfort.

This sway bar is manufactured from solid, heat-treated 4140 chromoly steel for maximum durability and consistent performance under load. The adjustable rate design allows you to fine-tune the suspension stiffness to match your specific towing requirements. This kit is a direct bolt-on installation using factory mounting points and includes all necessary hardware.

• Part Number: 7267
• Material: Solid, heat-treated chromoly steel
• Diameter: 1-5/16 inches (Big Wig series)
• Type: Adjustable rate rear sway bar
• Installation: Quick bolt-on application
• Includes: Sway bar, mounting hardware, and instructions
• Warranty: Limited Lifetime Warranty

Fits 2003-2008 Dodge Ram 2500 and 3500 heavy-duty trucks across all trim levels including Laramie, SLT, ST, and Power Wagon.

The Hellwig Big Wig rear sway bar is a precision-engineered handling solution designed specifically for heavy-duty towing and hauling applications. Because many factory Ram trucks are not equipped with a rear sway bar from the dealership, they often suffer from significant body roll and instability when carrying heavy loads or truck campers. This 1-5/16" diameter bar is the largest diameter available from Hellwig, offering maximum roll stiffness to improve driver control, comfort, and safety.

Constructed from solid, heat-treated chromoly steel, the Big Wig (MPN 7265) provides the structural rigidity necessary to manage a high center of gravity. The kit features a straightforward bolt-on installation, mounting to factory points to provide an immediate improvement in cornering stability and load management.

• 1-5/16" diameter solid heat-treated chromoly steel construction
• Engineered specifically for heavy-duty towing and hauling (Big Wig series)
• Significantly reduces body roll for improved cornering stability
• Straightforward bolt-on installation with included hardware
• Limited Lifetime Warranty
• Manufacturer Part Number: 7265

Fits select 2007-2018 Dodge, Freightliner, and Mercedes-Benz Sprinter 3500 Base models (2WD/4WD).

The Hellwig 7254 rear sway bar is an essential suspension upgrade for Sprinter 3500 owners managing heavy loads or frequent towing. By replacing the undersized factory sway bar with a larger 1.5-inch solid bar, this kit significantly reduces body roll and improves lateral stability. The result is better handling through corners and more predictable vehicle behavior in crosswinds or heavy-haul conditions.

Each bar is manufactured from high-strength, solid heat-treated chromoly steel for maximum torsional stiffness and durability. The bolt-on design allows for straightforward installation using basic tools and factory mounting points where applicable.

• Manufacturer Part Number: 7254
• Diameter: 1-1/2 inch (1.5")
• Material: Solid heat-treated 4140 chromoly steel
• Position: Rear
• Drivetrain: Compatible with 2WD and 4WD models
• Finish: Hammer tone powder coat

Fits 1999-2022 Ford E-350 Super Duty, Club Wagon, and Econoline Club Wagon.

The Hellwig 7182 rear sway bar is a high-performance handling upgrade designed to combat body roll and improve stability on heavy-duty Ford E-Series vans. Engineered specifically for vehicles facing high load and towing demands, this sway bar replaces or upgrades the factory equipment to provide increased stiffness and more predictable cornering. The larger-than-stock 1.5-inch diameter significantly reduces sway, improving both driver comfort and safety during everyday transit and heavy-haul conditions.

• Manufactured from solid, heat-treated 4140 chromoly steel for maximum durability
• 1-1/2 inch (38mm) diameter provides superior roll control over OEM bars
• Direct bolt-on installation with precision-engineered hardware
• Improves steering response and vehicle balance under load
• Manufacturer Part Number: 7182
• Limited Lifetime Warranty

Fits 1997-2020 Chevrolet Express 3500 and GMC Savana 3500.

The Hellwig 7181 rear sway bar is a performance-oriented suspension upgrade designed to reduce body roll and improve lateral stability on heavy-duty GM vans. Constructed from 1-1/4 inch solid, heat-treated chromoly steel, this sway bar provides the increased torsional stiffness required for high-center-of-gravity vehicles, especially those used for towing or heavy hauling. By better distributing weight across the rear axle during cornering, it enhances driver control and overall vehicle safety.

This kit is engineered for a direct bolt-on installation, utilizing precision-fit components to replace or upgrade factory suspension parts. The solid chromoly construction ensures long-term durability under demanding load conditions.

• Manufacturer Part Number: 7181
• Bar Diameter: 1.25 in (31.75 mm)
• Material: Solid, heat-treated chromoly steel
• Fitment Type: Vehicle-specific bolt-on
• Applications: Towing, hauling, and everyday drivability
• Warranty: Limited Lifetime Warranty

Fits 1997-2021 Ford E-40 and E-450 chassis.

The Hellwig 7180 rear sway bar is an essential handling upgrade for heavy-duty chassis, specifically engineered to manage the high center of gravity and weight demands of towing, hauling, and motorhome applications. By increasing roll stiffness, this 1-1/2 inch diameter bar significantly reduces body roll and improves stability during cornering, crosswinds, and emergency maneuvers.

Constructed from solid, heat-treated 4140 chromoly steel, this sway bar offers superior strength and durability compared to smaller factory units. The kit is designed as a direct bolt-on installation, utilizing precision-engineered components to optimize vehicle balance and everyday drivability without sacrificing comfort.

• Material: Solid heat-treated chromoly steel
• Bar Diameter: 1-1/2 inches (1.5")
• Placement: Rear
• Manufacturer Part Number: 7180
• Installation: Direct bolt-on design
• Application: Heavy-duty towing, hauling, and commercial use
• Warranty: Limited Lifetime Warranty

Fits 1995-1999 BMW M3 Base and Lightweight (3.0L).

H&R Sport Sway Bars are engineered for drivers who want to significantly improve handling and lateral stability without compromising ride quality or lowering the vehicle. This kit increases the suspension's roll stiffness, reducing body roll in turns while maintaining daily-driver comfort and increasing overall cornering grip.

Manufactured in Germany, these bars are crafted from high-tensile 50CrV4 spring steel for exceptionally fast response times and smooth transitional function. The smooth, machined-like forged ends ensure precision fitment and long-term durability. A standout feature is the included H&R proprietary bushings, made from a unique urethane/Teflon composite that eliminates the need for messy lubrication and prevents the squeaking common with standard aftermarket bushings.

• Front Sway Bar Diameter: 28mm
• Rear Sway Bar Diameter: 24mm
• Material: 50CrV4 High-Tensile Steel
• Bushings: Maintenance-free Urethane/Teflon composite
• Finish: Powder-coated for corrosion resistance
• Includes front and rear bars with all necessary mounting hardware
• Manufacturer Part Number: 72910

Fits select 2013-2020 BMW 2 Series, 3 Series, and 4 Series xDrive models (335i, 340i, 435i, 440i, M235i, M240i).

H&R Sport Sway Bars are engineered for drivers who demand improved handling and lateral stability without compromising ride quality. By increasing the suspension's roll stiffness, this kit significantly reduces body roll during cornering and rapid directional changes. Each bar is crafted from high-tensile 50CrV4 spring steel, ensuring faster response times and smooth transitional function on both the street and the track.

A standout feature of H&R sway bars is the use of proprietary bushings. Formulated from a special urethane/Teflon composite, these bushings eliminate the need for periodic lubrication and prevent the squeaking often associated with aftermarket polyurethane components. The bars also feature precision-forged ends for maximum strength at the mounting points.

• Front Sway Bar: 28mm
• Rear Sway Bar: 20mm
• Material: 50CrV4 spring steel
• Finish: Powder-coated for corrosion resistance
• Bushings: Maintenance-free Urethane/Teflon composite
• Origin: Made in Germany
• Manufacturer Part Number: 72878-3

This Part Fits:

Fits select 2012-2020 BMW 335i, 435i, 440i, M235i, and M240i models.

H&R Sport Sway Bars are engineered to improve handling and reduce body roll without compromising ride quality or requiring a lower ride height. By increasing the suspension's roll stiffness, these bars enhance cornering control, lateral stability, and overall grip. Each bar features smooth, precision-forged ends for maximum strength and consistent performance. This complete kit includes both front and rear bars, matched to provide neutral, predictable handling for your BMW chassis.

Constructed from high-tensile 50CrV4 spring steel, these sway bars provide a faster response time and smoother transitions during cornering. The kit includes H&R's proprietary sway bar bushings, which are manufactured from a special urethane/Teflon composite. This unique material eliminates the need for periodic lubrication and prevents the annoying squeaks often associated with aftermarket bushings.

• Front Sway Bar Diameter: 28mm
• Rear Sway Bar Diameter: 20mm
• Material: 50CrV4 high-tensile spring steel
• Bushings: No-maintenance Urethane/Teflon composite
• Installation: Replaces OE components; mounting hardware included where applicable
• Manufacturer Part Number: 72878-2
• Country of Manufacture: Germany