Fits 2002-2006 Acura RSX Base and Type-S models.

The Cusco 25mm Rear Sway Bar is designed to significantly reduce body roll and improve cornering stability for the DC5 chassis. By increasing the torsional rigidity of the rear suspension, this sway bar helps the Acura RSX maintain a flatter posture during high-speed maneuvers and aggressive cornering, resulting in more predictable handling and improved tire contact patches. This is a crucial upgrade for enthusiasts looking to sharpen steering response and neutralize understeer without sacrificing ride quality.

• Diameter: 25mm
• Position: Rear
• Material: High-strength steel construction
• Finish: Signature Cusco Blue powder coat for superior corrosion resistance
• Installation: Direct bolt-on to factory mounting points
• Manufacturer Part Number: 322 311 B25

Fits 2002-2006 Acura RSX Base and Type-S models.

The Cusco 25mm Front Sway Bar is designed to significantly reduce body roll and improve the handling characteristics of the DC5 chassis. By increasing the torsional rigidity of the front suspension, this bar keeps the vehicle flatter through corners, resulting in improved tire contact patches and sharper steering response during spirited driving or track sessions.

• Diameter: 25mm
• Position: Front
• Material: High-strength spring steel construction
• Finish: Signature Cusco Blue coating for corrosion resistance
• Part Number: 322 311 A25

This component is engineered as a direct replacement for the factory unit, utilizing original mounting points for a precise fit. It is a critical upgrade for drivers looking to neutralize understeer and enhance the overall stability of their 2002-2006 Acura RSX.

Fits Nissan Juke (YF15) 2WD models. Please note: This component is specifically engineered for the front-wheel-drive (2WD) chassis and will not fit AWD variants.

The Cusco 16mm Rear Sway Bar is designed to significantly reduce body roll and improve the cornering stability of your Nissan Juke. By increasing the torsional rigidity of the rear suspension, this anti-roll bar helps maintain a flatter cornering attitude and more consistent tire contact patches during spirited driving. This upgrade is ideal for drivers looking to sharpen steering response and achieve a more balanced, neutral handling profile without compromising ride comfort.

• Manufacturer Part Number: 271 311 B16
• Diameter: 16mm
• Position: Rear
• Fitment: Nissan Juke (YF15) 2WD chassis only
• Finish: Signature Cusco Blue powder coat for corrosion resistance

Fits Nissan Skyline GT-R (BNR32 and BCNR33).

Improve your vehicle's handling and cornering stability with the Cusco 24mm Front Sway Bar. This suspension upgrade is designed to reduce body roll by increasing the roll stiffness of the front suspension. By limiting chassis lean during high-speed cornering, it helps maintain a flatter tire contact patch, providing more consistent grip and sharper steering response.

Constructed for durability and precision, this 24mm bar replaces the factory unit and is engineered to work with the GT-R's chassis dynamics. It is an essential modification for enthusiasts looking to eliminate the "boaty" feel of the stock suspension without sacrificing significant ride quality. The bar typically installs using factory mounting locations for a direct-fit solution.

• Position: Front
• Diameter: 24mm
• Reduces body roll and improves lateral stability
• Enhances steering turn-in and predictable handling
• Manufacturer Part Number: 231 311 A

Fits 2023-2024 Toyota GR Corolla models (GZEA14H).

Improve the cornering performance and stability of your GR Corolla with the Cusco 26mm Rear Sway Bar. By increasing the torsional rigidity of the rear suspension, this sway bar effectively reduces body roll during high-speed cornering and quick directional changes without significantly compromising ride quality. It is a vital upgrade for drivers looking to neutralize understeer and achieve a more balanced, neutral handling characteristic on both the street and the track.

Constructed from high-tensile solid steel, this bar is designed to withstand the stresses of spirited driving. It features the signature Cusco Blue powder-coated finish for superior corrosion resistance and long-term durability. This component is a direct replacement for the factory unit and is engineered to utilize the original mounting locations for a straightforward installation.

• Diameter: 26mm
• Construction: Solid Steel
• Finish: Cusco Blue Powder Coat
• Position: Rear
• Manufacturer Part Number: 1H1 311 B26

Fits 2023+ Toyota GR Corolla (GZEA14H).

Sharpen the handling of your GR Corolla with the Cusco 28mm Front Sway Bar. This upgraded stabilizer bar is engineered to reduce body roll during aggressive cornering, providing more precise steering response and a flatter cornering attitude. By increasing the roll stiffness of the front suspension, this bar helps maintain a better tire contact patch for improved grip.

• Diameter: 28mm
• Position: Front
• Replaces the factory front stabilizer bar
• High-strength construction for consistent performance under load
• Finished in signature Cusco Blue
• Manufacturer Part Number: 1H1 311 A28

Fits 2020+ Toyota Supra (A90) models equipped with the 3.0L Turbo engine.

The Cusco rear sway bar is a critical suspension upgrade designed to reduce body roll and improve chassis stability during high-speed cornering. By increasing the torsional rigidity of the rear suspension system, this 22mm bar provides a more neutral handling balance and sharper steering response, allowing for higher exit speeds and more predictable vehicle dynamics.

• Diameter: 22mm solid construction for increased stiffness
• Direct Fit: Replaces the factory rear sway bar using original mounting points
• Performance: Minimizes body lean without compromising ride comfort during daily driving
• Finish: Durable Cusco Blue powder coating for superior corrosion resistance
• Part Number: 1C2 311 B22

Ideal for both street enthusiasts and track-day drivers, this sway bar helps the A90 chassis stay flat through the turns, maximizing the contact patch of your tires. Installation is straightforward as it utilizes the OE mounting hardware and locations.

Fits 2020-2024 Toyota Supra (A90) equipped with the 3.0L Turbo engine.

The Cusco 28mm Front Sway Bar is engineered to significantly reduce body roll and improve handling precision on the Toyota Supra A90. By increasing the torsional rigidity of the front suspension, this bar minimizes chassis lean during high-speed cornering, ensuring more consistent tire contact and sharper turn-in response. It serves as a direct bolt-on replacement for the factory component and is compatible with original mounting points.

• Diameter: 28mm
• Material: High-strength spring steel
• Finish: Signature Cusco Blue powder coat
• Installation: Replaces OE front sway bar using factory mounting points
• Manufacturer Part Number: 1C2 311 A28

Fits Toyota C-HR.

The Cusco 26mm Rear Sway Bar (1A7 311 B26) is designed to significantly reduce body roll and improve handling stability for the Toyota C-HR. By increasing the rear suspension's torsional rigidity, this upgrade minimizes chassis lean during cornering, providing a flatter, more controlled driving experience and sharper steering response without compromising ride comfort.

• Diameter: 26mm construction for increased stiffness over the factory bar
• Reduces body roll and improves chassis balance during high-speed maneuvers
• Direct bolt-on design for straightforward installation using factory mounting points
• Finished in Cusco's signature blue powder coat for long-lasting corrosion resistance
• Includes specialized bushings for precise fitment and performance
• Manufacturer Part Number: 1A7 311 B26

Improve the handling and stability of your Toyota C-HR with the Cusco 28mm Front Sway Bar. By increasing the roll stiffness of your suspension, this anti-roll bar effectively reduces body roll during cornering and rapid lane changes, providing more consistent tire contact and improved steering response without significantly compromising ride quality.

Constructed from high-strength spring steel and finished in the signature Cusco Blue powder coat for long-term corrosion resistance, this bar is engineered to endure the stresses of spirited driving. This is a direct bolt-on upgrade that replaces the factory front sway bar and utilizes existing mounting points for a straightforward installation.

• Part Type: Front Sway Bar
• Diameter: 28mm
• Finish: Cusco Blue Powder Coat
• Reduces body roll and enhances cornering stability
• Direct fit for Toyota C-HR
• Includes necessary bushings for installation
• Manufacturer Part Number: 1A7 311 A28

Fits 2001-2005 Lexus IS300 Base.

Improve your vehicle's cornering performance and stability with the Cusco 16mm Rear Sway Bar. By increasing the roll stiffness of the rear suspension, this sway bar significantly reduces body lean during spirited driving or track use, allowing for more precise turn-in and improved traction. It is a direct-fit upgrade for the SXE10 chassis, engineered to work seamlessly with factory or aftermarket suspension components for a more predictable handling experience.

• Diameter: 16mm
• Position: Rear
• Reduces body roll and improves chassis balance
• Retains ride comfort while increasing roll resistance
• Manufacturer Part Number: 195 311 B
• Special Order Item: Non-cancellable (S/O NO Cancel)

Fits Lexus GS400 (JZS161).

The Cusco Front Stabilizer Sway Bar significantly improves handling by reducing body roll during cornering. By increasing the torsional rigidity of the front suspension, this 32mm bar maintains a flatter tire contact patch and provides sharper steering response without sacrificing ride comfort. Designed as a direct bolt-on upgrade, it uses existing factory mounting points for a precise installation.

• Part Type: Front Stabilizer Sway Bar
• Diameter: 32mm
• Material: High-strength steel construction
• Finish: Signature Cusco Blue powder coat
• Manufacturer Part Number: 187 311 A32

Improve the cornering performance and handling response of your Toyota Chaser JZX100 with the Cusco 21mm Rear Sway Bar. By increasing the roll stiffness of the rear suspension, this stabilizer bar reduces body roll during high-speed cornering and quick directional changes, providing a more stable and predictable chassis balance.

• Diameter: 21mm solid construction
• Material: High-strength spring steel for consistent performance
• Finish: Cusco signature blue powder coat for corrosion resistance
• Installation: Direct bolt-on replacement using factory mounting points
• Fitment: Toyota Chaser JZX100
• Manufacturer Part Number: 175 311 B21

This Cusco stabilizer bar is designed to refine the vehicle's turn-in characteristics and limit unwanted weight transfer without significantly impacting ride quality. It is an essential upgrade for enthusiasts looking to optimize their JZX100 for track use or spirited street driving.

Fits 2001-2005 Lexus IS300 Base models.

The Cusco Front Sway Bar is a direct-fit performance upgrade designed to reduce body roll and improve handling stability during spirited driving and cornering. By increasing the roll stiffness of the front suspension, this 30mm anti-roll bar provides more precise turn-in and maintains a flatter contact patch for the tires without sacrificing daily ride quality. This is a critical suspension component for enthusiasts looking to optimize the chassis response of the Lexus IS300 and related JZX/SXE platforms.

• Diameter: 30mm
• Reduces lateral body roll and improves cornering stability
• Finished in signature Cusco Blue powder coating for corrosion resistance
• High-strength steel construction for consistent torsional rigidity
• Direct replacement for the factory front sway bar
• Manufacturer Part Number: 175 311 A30

Fits 1985-1987 Toyota Corolla Sport GTS (AE86).

The Cusco 20mm Rear Sway Bar is designed to significantly reduce body roll and improve the cornering stability of the AE86 chassis. By increasing the torsional rigidity of the rear suspension, this stabilizer bar provides more predictable weight transfer and keeps the tires better planted during aggressive maneuvers. Built to the precise tolerances required for enthusiast driving, it serves as a direct upgrade for the factory rear bar.

• Diameter: 20mm
• Position: Rear
• Material: High-strength steel
• Finish: Cusco Blue coating for corrosion resistance
• Fitment: Toyota Corolla Sport GTS (AE86) 1985-1987
• MPN: 116 311 B20

Fits 1985-1987 Toyota Corolla Sport GTS (AE86).

The Cusco front sway bar (stabilizer bar) is engineered to reduce body roll during cornering by increasing the torsional rigidity of the front suspension. For the AE86 chassis, this 23mm diameter bar provides a significant upgrade over the factory component, resulting in flatter cornering, improved turn-in response, and more stable handling at the limit without compromising overall ride quality.

• Diameter: 23mm
• Position: Front
• Enhances steering precision and reduces body lean
• Designed for high-performance street and track use
• Direct-fit replacement for the OE front stabilizer
• Manufacturer Part Number: 116 311 A23

Fits 2005-2014 Ford Mustang (Base, GT, Boss 302, Bullitt, and Shelby GT/GT500/GT500KR).

Designed for high-horsepower drag racing and street performance, the BMR Suspension Xtreme Anti-Roll Bar (XSB005R) eliminates excessive body roll to ensure maximum traction during hard launches. This kit replaces factory units with a much stiffer 1.375-inch (35mm) heavy-wall DOM tubing bar that transfers power more efficiently to the rear wheels. The hollow design provides immense torsional rigidity without the weight penalty of a solid bar, while the 3-way adjustability allows you to fine-tune the suspension rate for the track or the street.

• 3-way adjustable design with rate increases of 2,430%, 3,080%, and 4,090% over stock
• Includes 88-durometer, low-deflection polyurethane bushings with internal fluting for superior grease retention
• Fabricated laser-cut steel arms are reinforced to minimize deflection under high compression loads
• Durable red powdercoat finish for long-lasting protection
• Installation time: 1-2 hours; minimal welding required for reinforcement
• Manufacturer Part Number: XSB005R
• Proudly made in the U.S.A.

Fits 2010-2015 Chevrolet Camaro LS/LT and 2010-2011 Camaro SS.

Designed for high-horsepower drag racing and street performance, the BMR Suspension Xtreme Anti-Roll Bar (XSB004R) solves the traction-limiting body roll common in independent rear suspension (IRS) vehicles. This kit allows for harder launches by transferring power more effectively to the rear wheels without sacrificing street drivability. The bar is manufactured from heavy-wall 1.375-inch DOM tubing, providing exceptional torsional rigidity while the hollow design minimizes unsprung weight.

The XSB004R features 3-way adjustability, offering a 432% to 780% increase in rate over the factory rear sway bar. This versatility allows you to tune the chassis for the track and adjust it for the drive home. The kit includes 88-durometer polyurethane bushings that are internally fluted to retain grease under high compression loads, along with reinforced, laser-cut steel sway bar arms to minimize deflection during hard weight transfer.

• Manufacturer Part Number: XSB004R
• 1.375-inch heavy-wall DOM tubing construction
• 3-way adjustable design for fine-tuning roll stiffness
• 432% to 780% stiffer than factory rear sway bar
• 88-durometer low-deflection polyurethane bushings
• Fabricated, reinforced laser-cut steel arms
• Durable red powdercoat finish
• Installation time: approximately 1-2 hours
• Proudly made in the USA

Fits 2010-2015 Chevrolet Camaro LS, LT, and SS models. Designed specifically for high-horsepower drag race and street performance applications, the BMR Xtreme Anti-Roll Bar (XSB004H) allows for harder launches by eliminating the body roll that limits traction. This hollow 1.375-inch kit provides superior chassis stabilization while minimizing weight gain.

Constructed from heavy-wall 1.375-inch DOM tubing, the kit features reinforced, laser-cut steel sway bar arms to ensure minimal deflection under extreme loads. The 3-way adjustable design provides a 432% to 780% increase in stiffness over the factory bar, allowing you to fine-tune the suspension for both track use and street manners. The system utilizes 88-durometer polyurethane bushings that are internally fluted to retain grease and resist deflection during high-compression launches.

• Manufactured from heavy-wall 1.375-inch DOM tubing
• 3-way adjustable for versatile track and street tuning
• 432% to 780% rate increase over stock bar
• Includes 88-durometer low-deflection polyurethane bushings
• Laser-cut steel arms reinforced for added strength
• Black Hammertone powdercoat finish for durability
• Estimated installation time: 1-2 hours
• Proudly made in the U.S.A.
• Manufacturer Part Number: XSB004H

Fits 2005-2014 Ford Mustang models. Eliminate body roll and sharpen the handling response of your S197 chassis with the BMR Suspension Front Hollow Sway Bar Kit. This 38mm bar is engineered to provide a significant increase in roll stiffness over the factory unit, making it an essential upgrade for street performance, autocross, and track day applications.

Constructed from heavy-duty hollow tubing, this sway bar delivers the necessary rate to keep your Mustang flat through the corners without the unnecessary weight of a solid bar. The kit comes complete with greasable polyurethane bushings and zinc-plated saddles, ensuring smooth, quiet operation while minimizing deflection under load.

• 38mm hollow design for maximum roll stiffness with minimal weight
• Reduces body roll and improves steering response during cornering
• Durable Hammertone Black powder coat finish resists corrosion and debris
• Includes greasable polyurethane bushings and heavy-duty mounting hardware
• Direct bolt-on installation to factory mounting points
• Manufacturer Part Number: SB754H

Fits 2008-2019 Dodge Challenger models.

Improve the handling and cornering stability of your Challenger with the BMR Suspension front and rear hollow sway bar kit. This kit (SB113H) is engineered to significantly reduce body roll during aggressive street driving or track events by increasing the roll stiffness of the chassis. By utilizing a hollow design, BMR provides a massive 38mm front and 25mm rear diameter for superior leverage over the suspension without the weight penalty of solid bars.

• Front Sway Bar: 38mm hollow heavy-duty steel tubing
• Rear Sway Bar: 25mm hollow heavy-duty steel tubing
• Finish: Durable Black Hammertone powder coat
• Includes: Greasable polyurethane bushings and mounting hardware
• Reduces body roll and improves transitional handling
• Replaces factory sway bars using OE mounting locations
• Manufacturer Part Number: SB113H

Fits 2008-2020 Dodge Challenger models. Increase the roll stiffness and improve the handling dynamics of your vehicle with the BMR SB111H Front Sway Bar Kit. This kit is engineered to reduce body roll during cornering, providing a more stable and controlled driving experience for street or track applications.

Built to last, this front sway bar features a durable Black Hammertone powder coat finish for superior corrosion resistance and a clean, technical look under the chassis. It is designed to integrate with the factory mounting points for a direct-fit upgrade.

• Product Type: Front Sway Bar Kit
• Manufacturer Part Number: SB111H
• Finish: Black Hammertone Powder Coat
• Fitment: 2008-2020 Dodge Challenger
• Function: Reduces body roll and improves cornering stability

Fits select 2015-2024 Ford Mustang models including EcoBoost, GT, V6, Bullitt, Mach 1, Shelby GT350/GT500, and Dark Horse.

The BMR Suspension SB045R rear sway bar is engineered to drastically reduce body roll and allow for precise fine-tuning of your vehicle's handling balance. Manufactured from heavy-duty 25mm bar stock, this component is cold-formed to better resist torsional fatigue and retain its "memory" far longer than standard hot-formed bars. This kit provides a 63% to 208% increase in rate over the factory sway bar, allowing for much flatter cornering and more aggressive turn-in.

Designed for street performance, autocross, and road racing, the SB045R features 3-way adjustability to dial in the perfect amount of understeer or oversteer for your specific setup. The kit includes high-performance 88-durometer polyurethane bushings that are internally fluted to trap grease, ensuring quiet operation and significantly reduced deflection compared to soft OE rubber bushings.

• Manufacturer Part Number: SB045R
• Diameter: 25mm heavy-duty construction
• Adjustability: 3-hole tuning for 63%-208% rate increases
• Material: CNC cold-formed bar stock for exact tolerances
• Bushings: 88-durometer polyurethane with internal fluting
• Finish: Long-lasting red powdercoat
• Installation: Direct-fit replacement; approximately 1-2 hours

Fits 2015-2024 Ford Mustang models including EcoBoost, GT, V6, Mach 1, Bullitt, Shelby GT350/GT500, and Dark Horse.

The BMR Suspension SB043R front and rear sway bar kit is engineered to significantly reduce body roll and fine-tune the handling characteristics of your S550 or S650 Mustang. Designed for street performance, autocross, and road racing, these bars increase torsional spring rates to eliminate the vague feel of factory suspension. Each bar is CNC-formed from heavy-duty DOM steel tubing and cold-formed to ensure long-term shape memory and superior resistance to torsional fatigue compared to hot-formed alternatives.

The front bar features welded thrust washers to locate the sway bar bushing mounts, preventing lateral movement during hard cornering maneuvers. This kit includes 88-durometer polyurethane bushings that are internally fluted to retain grease, providing a significant reduction in deflection over soft OE rubber bushings for more immediate steering response.

• Front Sway Bar: 35mm heavy-duty DOM steel tubing
• Rear Sway Bar: 25mm heavy-duty DOM steel tubing
• Cold-formed construction for maximum durability and fatigue resistance
• Includes 88-durometer, low-deflection, greaseable polyurethane bushings
• Welded thrust washers on front bar to eliminate lateral migration
• Red powdercoat finish for corrosion resistance
• Manufacturer Part Number: SB043R

Fits 2005-2014 Ford Mustang (Base, GT, Boss 302, Bullitt, and Shelby GT/GT500/GT500KR).

Improve the handling and cornering stability of your S197 Mustang with the BMR Suspension SB042R adjustable rear sway bar. Designed for street performance, autocross, and drag racing, this 25mm bar replaces the factory unit to significantly reduce body roll. The 4-position adjustability allows you to fine-tune your suspension's rate, providing a 16% to 270% increase in stiffness over various stock configurations. This versatility means you can maintain comfortable street manners while having the necessary roll control for hard launches and high-speed cornering.

The SB042R is engineered from heavy-duty hollow tubing, providing the stiffness of a larger solid bar without the unnecessary weight. It comes finished in a durable red powdercoat for long-lasting corrosion resistance and includes greaseable polyurethane bushings for quiet, reliable operation.

• Manufacturer Part Number: SB042R
• Diameter: 25mm
• Design: Hollow tubing for weight savings
• Adjustability: 4-position settings
• Finish: Red powdercoat
• Includes greaseable polyurethane bushings
• Estimated installation time: 1-2 hours
• Made in the USA

Fits 2005-2014 Ford Mustang Base, GT, Boss 302, Bullitt, and Shelby GT/GT500/GT500KR.

Designed for street performance, drag racing, and road course applications, the BMR Suspension SB042H rear sway bar provides the versatility needed to tune your Mustang's handling. This 25mm hollow bar features four adjustment positions, allowing you to fine-tune the roll stiffness to suit your driving style or track conditions. The hollow design offers a high strength-to-weight ratio, ensuring durability and stiffness without the weight penalty of a solid bar.

The SB042H provides a significant increase in rate over factory bars—ranging from 16% to 270% depending on your specific year and model—effectively minimizing body roll for flatter cornering and more stable launches. Finished in a durable black hammertone powdercoat for long-lasting corrosion resistance, this kit includes greaseable polyurethane bushings for a complete upgrade.

• Manufacturer Part Number: SB042H
• Diameter: 25mm
• Construction: Lightweight hollow steel
• Adjustability: 4-position (16% to 270% rate increase over stock)
• Finish: Black Hammertone powdercoat
• Includes: Greaseable polyurethane bushings
• Installation: Bolt-on replacement, approx. 1-2 hours
• Country of Origin: Made in the USA

Fits 2010-2012 Chevrolet Camaro (LS, LT, and SS models).

The BMR SB030R sway bar kit is engineered to significantly reduce body roll and allow for precise tuning of your vehicle's handling characteristics. Designed for both street performance and track applications, this kit replaces the thin-wall factory bars with heavy-duty components that increase torsional spring rates. Both bars are manufactured from 29mm heavy-wall DOM tubing and are cold-formed to better resist torsional fatigue, ensuring the steel retains its "memory" longer than traditional hot-formed bars.

Precision is key for consistent handling; these bars are CNC-formed for exact tolerances and feature welded thrust washers to prevent lateral movement during high-load cornering. The kit includes 88-durometer, low-deflection polyurethane bushings that are internally fluted to retain grease for quiet operation. To further minimize flex, the included steel mounting brackets are reinforced to withstand the increased leverage of the thicker bars. With 3-way adjustability, you can easily fine-tune the front and rear bias to achieve your desired balance between understeer and oversteer.

• Manufacturer Part Number: SB030R
• Construction: 29mm heavy-wall DOM tubing
• Manufacturing: Cold-formed and CNC-bent
• Adjustability: 3-way adjustable front and rear
• Bushings: 88-durometer fluted polyurethane
• Hardware: Includes reinforced mounting brackets and thrust washers
• Finish: Red powdercoat for durability

Fits 2008-2009 Pontiac G8 Base, GT, and GXP.

Improve the handling and cornering stability of your Pontiac G8 with the BMR Suspension SB029R sway bar kit. Designed to significantly reduce body roll and allow for precise tuning of understeer and oversteer, this kit replaces the small-diameter factory bars with high-performance 29mm heavy-wall DOM tubing. Unlike hot-formed alternatives, BMR bars are cold-formed to better resist torsional fatigue and maintain their memory over years of hard use.

The kit features a CNC-formed design for exact fitment and repeatable tolerances. The rear bar includes welded thrust washers to prevent lateral movement during aggressive cornering. To ensure consistent performance, the system mounts with low-deflection 88-durometer polyurethane bushings that are internally fluted to retain grease. The included steel mounting brackets are reinforced to eliminate bracket flex under load.

• Manufacturer Part Number: SB029R
• Material: 29mm heavy-wall DOM tubing
• Adjustability: 2-way and 3-way adjustable for custom handling balance
• Manufacturing: Cold-formed for superior torsional strength
• Bushings: 88-durometer fluted polyurethane
• Finish: Durable red powder coat
• Includes reinforced steel mounting brackets

Fits 1964-1972 GM A-Body vehicles, including Chevrolet Chevelle, Pontiac GTO, Oldsmobile Cutlass, and Buick Skylark. This BMR Suspension sway bar kit is engineered to dramatically reduce body roll and improve the handling characteristics of your classic muscle car by increasing sway bar rates by up to 400% in the front and 200% in the rear.

The kit features a 1.25-inch front bar and a 1-inch rear bar, both manufactured from heavy-duty DOM steel tubing. The front bar offers 2-hole adjustability, allowing you to fine-tune your suspension for street or track use. These bars are cold-formed to better resist torsional fatigue, ensuring long-term performance and durability under load.

• Construction: 1.25-inch (Front) and 1-inch (Rear) DOM steel tubing
• Adjustability: 2-hole adjustable front bar; non-adjustable rear bar
• Bushings: Greaseable 88-durometer polyurethane bushings for reduced deflection
• Hardware: High-strength Grade 8 mounting hardware included
• Finish: Durable Black Hammertone powder coat for superior corrosion resistance
• Components: Includes SB008 (Front) and SB009 (Rear)
• MPN: SB028H

Fits 2008-2009 Pontiac G8 (Base, GT, and GXP).

The BMR Suspension SB013R rear sway bar kit is engineered for street performance, drag racing, and road course applications where flat cornering and adjustable handling balance are essential. This 22mm hollow sway bar significantly reduces body roll by increasing the torsional spring rate, allowing you to drive harder through corners with improved stability. Its hollow design provides the same stiffness as a smaller solid bar while maintaining a high strength-to-weight ratio.

The SB013R features three adjustment holes, giving you the versatility to fine-tune your vehicle's handling characteristics (understeer vs. oversteer) for the track or the street. Depending on the setting, this bar provides a 91% to 286% increase in rate over the factory rear bar. The kit includes greasable polyurethane bushings and features a durable red powdercoat finish for long-lasting protection against the elements.

• Part Number: SB013R
• Diameter: 22mm
• Material: Hollow steel tubing
• Adjustability: 3-way (Hole 1: +91% OE, Hole 2: +164% OE, Hole 3: +286% OE)
• Finish: Red powdercoat
• Installation: 1-2 hours estimated
• Origin: Made in the USA