Fits 2008-2009 Pontiac G8 Base, GT, and GXP models.

The BMR SB013H rear sway bar is engineered to significantly reduce body roll and improve lateral stability for street performance, drag racing, and autocross applications. This 22mm hollow bar features 3-way adjustability, allowing you to fine-tune the torsional spring rate to correct understeer or oversteer. Its hollow construction provides high-strength rigidity without the weight penalty of a solid steel bar.

Constructed with laser-cut, TIG-welded ends, the SB013H is built to withstand heavy suspension loading with minimal deflection. The kit includes greaseable polyurethane bushings and is finished in a durable Black Hammertone powdercoat for long-lasting corrosion resistance. Installation is straightforward with an estimated time of 1-2 hours.

• Manufacturer Part Number: SB013H
• Bar Diameter: 22mm
• Construction: Hollow steel with TIG-welded ends
• Adjustability: 3-Way (91%, 164%, or 286% stiffer than OE)
• Finish: Black Hammertone powdercoat
• Includes: Greaseable polyurethane bushings
• Proudly made in the U.S.A.

Fits 2008-2017 Pontiac G8 (Base, GT, GXP) and Chevrolet SS. This BMR SB012R front sway bar is engineered for street performance, autocross, and road racing by significantly reducing body roll and improving turn-in response.

Constructed from heavy-duty 29mm hollow steel, this bar provides maximum rigidity while minimizing weight. The three-position adjustable design allows you to fine-tune your vehicle's handling characteristics to suit the track or the street. Rate increases are calculated at 87% stiffer than the original equipment (OE) bar in the first position and 137% stiffer in the second position. The kit replaces soft factory rubber with 88-durometer polyurethane bushings to eliminate deflection and maintain precise sway bar control.

• Manufacturer Part Number: SB012R
• Diameter: 29mm
• Design: Lightweight hollow steel
• Adjustability: 3-way adjustable (87% to 137% rate increase)
• Bushings: 88-durometer polyurethane included
• Finish: Red powdercoat
• Installation: Approximately 1-2 hours
• Country of Origin: USA

Fits select 1967-1974 Chevrolet Camaro, Nova, and Pontiac Firebird.

Improve the handling and cornering stability of your classic GM F-Body or X-Body with the BMR Suspension Front Hollow Sway Bar Kit. This non-adjustable 1.25-inch bar is cold-formed from heavy-duty DOM steel tubing, providing a massive 200% increase in sway bar rate over the factory equipment. By significantly reducing body roll, this upgrade allows for flatter cornering and more precise steering response during spirited street driving or autocross events.

The kit includes high-performance 88-durometer greaseable polyurethane bushings and zinc-plated sway bar saddles for a complete, durable installation. The hollow design offers the same torsional stiffness as a solid bar while saving weight over the front axle. Finished in a resilient red powder coat, this kit (MPN: SB004R) is designed to bolt directly to the factory mounting points in approximately 1-2 hours.

• Manufacturer Part Number: SB004R
• Material: 1.25-inch cold-formed DOM steel tubing
• Performance: 200% increase in rate over factory sway bar
• Bushings: Greaseable 88-durometer polyurethane for reduced deflection
• Hardware: Includes zinc-plated sway bar saddles
• Finish: Red powder coat for long-term corrosion resistance
• Origin: Designed and manufactured in the USA

Fits 2015-2021 Subaru WRX.

The BLOX Racing Sway Bar Set is designed to reduce body roll and improve the handling dynamics of the VA chassis Subaru WRX. By increasing the torsional stiffness of the suspension system, these bars help maintain a flatter contact patch during cornering, providing more predictable steering response and increased lateral grip.

This kit includes both front and rear sway bars, offering a comprehensive upgrade over the factory components. Each bar is engineered for a precise fit, utilizing standard mounting points to ensure a reliable installation for street or track applications.

• Significantly reduces chassis roll during cornering
• Improves steering precision and overall vehicle balance
• Direct replacement for OEM sway bars
• Includes both front and rear components
• Manufacturer Part Number: BXSS-10120-SET

Fits 2015-2021 Subaru WRX and WRX STI.

The BLOX Racing Rear Sway Bar is engineered to enhance the handling dynamics of the VA chassis. By increasing the torsional rigidity of the rear suspension, this 24mm upgrade effectively reduces body roll during high-speed cornering and quick transitions. This result is a more balanced vehicle with improved steering response and reduced understeer, making it an essential modification for both spirited street driving and track use.

• Diameter: 24mm
• Reduces body roll and improves lateral stability
• Designed for direct fitment on the 2015-2021 WRX/STI platform
• Manufacturer Part Number: BXSS-10120-R

Fits 1996-2000 Honda Civic models including CX, DX, EX, GX, HX, LX, Si, and Value Package.

The BLOX Racing Front Sway Bar Fixed End Link Set (BXSS-10107) is engineered to replace worn or damaged factory links, restoring the vital connection between your vehicle's sway bar and control arms. Over time, OE rubber bushings perish and link joints develop play, which causes clunking noises and decreased handling precision. These fixed-length links provide a direct-fit solution to maintain proper suspension geometry and sway bar effectiveness during cornering.

• Precision-engineered fixed-length design for factory suspension heights
• Direct replacement for original equipment (OE) end links
• Restores sway bar response and reduces body roll
• Includes all necessary mounting hardware for a straightforward installation
• Manufacturer Part Number: BXSS-10107

Vehicle Fitment:

• 1996-2000 Honda Civic CX
• 1996-2000 Honda Civic DX
• 1996-2000 Honda Civic EX
• 1998-2000 Honda Civic GX
• 1996-2000 Honda Civic HX
• 1996-2000 Honda Civic LX
• 1999-2000 Honda Civic Si
• 1999 Honda Civic Value Package

Fits 1992-2000 Honda Civic, Del Sol, and 1994-2001 Acura Integra.

The BLOX Racing Rear Sway Bar Hardware kit (BXSS-10101-HD) provides the necessary mounting components to ensure your rear stabilizer bar is securely fastened to the chassis. Over years of use, factory suspension hardware is often subject to corrosion, seizing, or fatigue; this kit serves as a reliable replacement during a suspension overhaul or when installing an upgraded aftermarket sway bar.

• Direct-fit hardware for rear stabilizer bar mounting
• Engineered for the 1992-2000 Honda Civic (EG/EK) and 1994-2001 Acura Integra (DC2) chassis
• High-quality fasteners designed to withstand suspension articulation and load
• Essential for replacing worn, rusted, or missing OE hardware
• Manufacturer Part Number: BXSS-10101-HD

Fits select 1992-2001 Honda Civic, Del Sol, and Acura Integra.

BLOX Racing rear sway bar bushings are designed to replace soft or deteriorated factory rubber units, providing a firmer connection between the sway bar and the chassis. By reducing unwanted lateral deflection, these bushings help maintain proper suspension geometry during hard cornering, resulting in improved steering response and more predictable handling characteristics.

• Precision-molded for a direct fit into factory mounting locations
• Durable construction resistant to oils, road salt, and environmental degradation
• Reduces compliance to provide flatter cornering and better road feel
• Includes two (2) rear sway bar bushings
• Manufacturer Part Number: BXSS-10101-BSH

Upgrade your vehicle's handling characteristics with the BLOX Racing Rear Sway Bar (BXSS-10101). Designed to reduce body roll and improve cornering stability, this sway bar is a vital upgrade for drivers looking to neutralize understeer and increase overall suspension responsiveness. By tying the rear suspension components together more effectively, it ensures more consistent tire contact and flatter cornering during spirited driving or track use.

Fits select 1992-2001 Honda Civic, Civic del Sol, and Acura Integra models (including DX, EX, Si, GS-R, and Type R).

• Manufacturer Part Number: BXSS-10101
• Reduces body roll and improves chassis rigidity
• Helps correct understeer for more neutral handling
• Direct fitment for specified Honda and Acura chassis
• NOTE: Rear end links are not included and must be sourced separately

Whether you are restoring a classic 90s Honda or building an Acura Integra for the track, this BLOX Racing sway bar provides the predictable handling required for performance driving.

Fits 1983-1997 Nissan 720, D21, and Pickup models (Base, Deluxe, Sport Truck, E, SE, XE).

Belltech Anti-Sway Bar Sets are engineered to significantly reduce body roll and sharpen steering response for your Nissan truck without compromising ride quality. By increasing the lateral stiffness of the suspension, these bars keep the chassis flat through corners, providing a more stable and predictable driving experience. These components are a direct upgrade for aged or undersized factory bars, solving the common "boat-like" handling characteristic often found in older pickups.

Each bar is manufactured from cold-formed solid steel for maximum torsional rigidity and features swedged ends for superior strength at the mounting points. The kit is finished in a gunmetal grey powder coat for long-term corrosion resistance and includes all necessary installation components to ensure a professional-grade fit.

• Manufacturer Part Number: 9930
• Reduces excessive body roll and improves high-speed stability
• Cold-formed solid steel construction for high torsional strength
• Includes front and rear performance anti-sway bars
• Durable gunmetal grey powder-coated finish
• Equipped with high-grade mounting hardware (Grade 8) and polyurethane bushings
• Direct-fit installation with included instructions

Fits select 1988-1998 Chevrolet and GMC C1500 and C2500 trucks.

Improve the handling and stability of your GMT400 truck with the Belltech Anti-Sway Bar set. These performance sway bars are engineered to eliminate the excessive "boat-like" body roll common in C1500 and C2500 pickups, keeping the chassis flat through corners for a more confident and predictable driving experience. Unlike generic upgrades, Belltech designs these bars to sharpen steering response and lateral grip without compromising the factory ride quality.

Constructed from cold-formed solid steel, these bars feature swedged ends for superior strength and reliability under heavy cornering loads. The kit is finished in a durable gunmetal grey powder coat for long-term corrosion resistance and includes high-performance polyurethane bushings to replace worn factory rubber components.

• Reduces body roll and improves steering response for better handling
• Manufactured from high-strength, cold-formed solid steel
• Swedged ends for increased structural integrity
• Includes high-performance polyurethane bushings for crisp feedback
• Gunmetal grey powder-coated finish for durability
• Complete kit includes Grade 8 mounting hardware and instructions
• Manufacturer Part Number: 9906

Fits select 2021-2025 Ford F-150 trucks, including XL, XLT, Lariat, King Ranch, Platinum, Limited, Raptor, Tremor, STX, SSV, and Police Responder submodels.

Improve the handling and steering response of your Ford F-150 with the Belltech Rear Anti-Sway Bar. This 25.4mm bar is engineered to minimize excessive body roll during cornering, providing a more stable and confident driving experience without compromising your vehicle's ride quality. By keeping the chassis flatter in turns, it significantly reduces that "boat-like" feeling common in trucks and SUVs.

Constructed from cold-formed solid steel for superior structural integrity, this sway bar features swedged ends for maximum reliability under load. Each kit is finished in a durable gunmetal grey powder coat to resist corrosion and includes high-performance polyurethane bushings that offer better responsiveness than factory rubber. The installation is straightforward with the included high-grade mounting hardware.

• Manufacturer Part Number: 5561
• Bar Diameter: 25.4mm (1.00 inch)
• Material: Cold-formed solid steel
• Finish: Gunmetal grey powder coat
• Bushings: High-grade polyurethane
• Hardware: Grade 8 mounting hardware and installation instructions included

Fits 2015-2020 Ford F-150 models with short bed cabs, including XL, XLT, Lariat, King Ranch, Platinum, Limited, Raptor, and SSV trims.

The Belltech 5559 1-inch rear anti-sway bar is engineered to significantly reduce body roll and improve steering response on 2015-2020 Ford F-150 pickups. By keeping the chassis flatter through corners, this bar provides a more controlled and confident driving experience without sacrificing ride comfort. Each bar is manufactured from cold-formed solid steel for maximum torsional rigidity and features swedged ends for superior strength at the mounting points.

• 1-inch diameter solid steel construction for increased stiffness and reduced sway
• Cold-formed design with swedged ends for maximum durability
• Gunmetal grey powder-coated finish for long-term corrosion resistance
• High-performance polyurethane bushings for precise response
• Includes Grade 8 mounting hardware and installation instructions
• Compatible with both 2WD and 4WD short bed configurations

Fits select 1973-1991 Chevrolet and GMC Blazer, C10, Jimmy, and Suburban models.

Improve the handling and stability of your classic GM sport truck or SUV with the Belltech Rear Anti-Sway Bar. This suspension upgrade is specifically engineered to reduce excessive body roll during cornering, eliminating the "boat-like" feel common in older chassis without compromising ride quality. By increasing the vehicle's roll stiffness, this bar ensures the tires stay planted, providing a more confident and predictable driving experience.

Manufactured from cold-formed solid steel for maximum torsional strength, this sway bar features swedged ends for superior reliability. The assembly is finished in a durable gunmetal grey powder coat to resist corrosion and road debris. This kit is a comprehensive solution, including all necessary high-grade mounting hardware and polyurethane bushings for a complete installation.

• Manufacturer Part Number: 5508
• Construction: Cold-formed solid steel
• Finish: Gunmetal grey powder coat
• Bushing Material: High-grade polyurethane
• Hardware: Grade 8 mounting hardware included
• Design: Minimizes body roll and improves steering response

Fits select 1999-2007 Chevrolet Silverado 1500 and GMC Sierra 1500 models, including Classic and HD variants.

Improve the handling and safety of your sport truck or SUV by significantly reducing body roll. The Belltech 5502 Rear Anti-Sway Bar is engineered to keep your vehicle flat through corners, providing a more confident steering response without compromising ride quality. By increasing the lateral stiffness of the chassis, this bar eliminates the common "boat-like" wallow associated with factory setups.

Constructed from cold-formed solid steel, this anti-sway bar features swedged ends for maximum strength at the mounting points. The assembly is finished in a durable gunmetal grey powder coat to resist corrosion and road debris. Each kit is a complete solution, arriving with high-grade mounting hardware and performance polyurethane bushings for a precise, long-lasting installation.

• Construction: Cold-formed solid steel with swedged ends
• Finish: Gunmetal grey powder coat
• Bushings: High-durometer polyurethane for reduced deflection
• Hardware: Grade 8 mounting hardware included
• MPN: 5502

Fits 1993-2002 Chevrolet Camaro and Pontiac Firebird models (including Z28, SS, Formula, and Trans Am).

Improve the cornering performance and stability of your F-Body with the Belltech Front Anti-Sway Bar. By minimizing excessive body roll and keeping the chassis flat through the turns, this sway bar delivers a more confident driving experience and sharper steering response without compromising ride quality. Engineered with over 30 years of suspension expertise, this bar is a direct upgrade for worn or undersized factory components.

Each Belltech sway bar is manufactured from cold-formed solid steel for maximum torsional rigidity. The ends are swedged for superior strength and reliability under heavy cornering loads. To ensure long-lasting performance and easy maintenance, the kit includes high-quality polyurethane bushings and Grade 8 mounting hardware. The bar is finished in a durable gunmetal grey powder coat to resist corrosion and road debris.

• Part Number: 5480
• Position: Front
• Material: Cold-formed solid steel with swedged ends
• Finish: Gunmetal grey powder coat
• Bushings: Performance polyurethane included
• Hardware: Grade 8 mounting hardware and installation instructions included

Fits select 2009-2024 Dodge Ram 1500, 2500, 3500 and Ram 1500/1500 Classic models.

The Belltech Front Anti-Swaybar (MPN 5465) is engineered to eliminate the "boat-like" body roll common in trucks and SUVs, keeping the chassis flat through corners for a more confident and stable driving experience. By increasing the roll stiffness of your suspension, this bar significantly improves steering response and handling without negatively impacting ride comfort.

Constructed from cold-formed solid steel, these bars feature swedged ends for superior structural integrity and reliability under heavy loads. Each bar is finished in a durable gunmetal grey powder coat to withstand road debris and corrosion.

• Manufactured from high-strength cold-formed solid steel
• Oversized diameter for increased torsional rigidity
• Precision swedged ends for maximum strength
• Durable gunmetal grey powder coat finish
• High-quality polyurethane bushings for reduced deflection
• Includes Grade 8 mounting hardware and installation instructions

Fits 1984-1995 Toyota Pickup (Base, DLX, SR5, SR5 Turbo) and 1995 Toyota Tacoma (Base).

Improve the handling and steering response of your Toyota truck with the Belltech Front Anti-Sway Bar. Engineered to stabilize suspension geometry, this sway bar significantly reduces the boat-like body roll common in stock Sport Trucks, keeping the vehicle flatter through corners without compromising ride quality. This upgrade provides a more confident, predictable driving experience by managing weight transfer more effectively.

Constructed from cold-formed solid steel for maximum torsional rigidity, these bars feature swedged ends for superior strength and reliability at the mounting points. The assembly is finished in a durable gunmetal grey powder coat to resist corrosion and road debris. Each kit comes complete with high-grade mounting hardware and polyurethane bushings for a precise, long-lasting installation.

• Manufacturer Part Number: 5458
• Cold-formed solid steel construction for increased stiffness
• Reduces body roll and improves cornering stability
• Swedged ends for enhanced structural integrity
• Durable gunmetal grey powder-coated finish
• Includes polyurethane bushings and Grade 8 mounting hardware
• Installation instructions included

Fits 1997-2004 Dodge Dakota.

Minimize the boat-like body roll of your truck and improve steering response with the Belltech 5438 Front Anti-Sway Bar. Designed to keep the chassis flat through corners without sacrificing ride quality, this sway bar significantly increases driving confidence and safety. It is a direct-fit upgrade for enthusiasts looking to sharpen the handling of their Dakota.

This anti-sway bar is manufactured from cold-formed solid steel for maximum torsional rigidity. It features swedged ends for superior strength and reliability at the mounting points. To ensure long-term durability in harsh undercar environments, the bar is finished in a gunmetal grey powder coat. The kit includes high-grade polyurethane bushings and Grade 8 mounting hardware for a precise installation.

• Improves cornering performance by reducing excessive body roll
• Cold-formed solid steel construction for high strength
• Durable gunmetal grey powder-coated finish
• Includes performance polyurethane bushings
• Complete with Grade 8 mounting hardware and installation instructions
• Manufacturer Part Number: 5438

Fits select 1982-2005 Chevrolet S10/Blazer, GMC S15/Jimmy/Sonoma, and Isuzu Hombre models.

The Belltech 5420 Front Anti-Sway Bar is engineered to significantly reduce body roll and improve steering response for S-series trucks and SUVs. By minimizing the lateral weight transfer during cornering, this sway bar keeps the vehicle flatter through turns, resulting in a more controlled and confident driving experience without sacrificing ride comfort. It is an ideal upgrade for sport trucks and SUVs looking to eliminate "boat-like" handling characteristics.

Constructed from cold-formed solid steel, this anti-sway bar features swedged ends for maximum strength at the leverage points. The assembly is finished in a gunmetal grey powder coat for long-term durability and corrosion resistance. Each kit is a comprehensive solution, including high-grade Grade 8 mounting hardware and performance polyurethane bushings to replace soft or deteriorated factory rubber.

• Manufacturer Part Number: 5420
• Position: Front
• Material: Cold-formed solid steel
• Finish: Gunmetal grey powder coat
• Hardware: Grade 8 mounting hardware included
• Bushings: High-performance polyurethane included
• Installation: Replaces factory sway bar using included hardware

Fits select 2007-2020 Cadillac Escalade, Chevrolet Silverado, Suburban, Tahoe, and Avalanche, and GMC Sierra and Yukon 1500 models.

Improve the handling and steering response of your GM truck or SUV by upgrading to a Belltech Front Anti-Sway Bar. Designed to mitigate the excessive body roll typical of large vehicles, this bar keeps the chassis flat through corners without compromising ride quality. It provides a more confident and stable driving experience by reducing lateral lean during maneuvers.

Each Belltech sway bar is manufactured from cold-formed solid steel for maximum torsional rigidity. The ends are swedged for superior strength and reliability under load. To ensure a long service life, the bar is finished in a durable gunmetal grey powder coat and includes high-quality polyurethane bushings and mounting hardware designed to resist the wear and deformation often seen with standard rubber components.

• Manufacturer Part Number: 5407
• Construction: Cold-formed solid steel for increased stiffness and durability
• Finish: Corrosion-resistant gunmetal grey powder coat
• Bushings: High-grade polyurethane bushings included
• Installation: Includes all necessary high-grade mounting hardware and instructions

Fits select 1973-1991 Chevrolet and GMC C10, C15, R10, K5 Blazer, Jimmy, and Suburban models.

Minimize body roll and improve steering response with the Belltech Front Anti-Sway Bar. Designed to correct the "boat-like" handling common in vintage square-body trucks and SUVs, this upgrade keeps the chassis flat during cornering without compromising ride quality. It is an essential suspension component for drivers seeking a more stable and predictable steering feel during daily driving or performance use.

This anti-sway bar is manufactured from cold-formed solid steel for maximum torsional rigidity. It features swedged ends for superior strength and a durable gunmetal grey powder-coated finish to resist corrosion and road debris. The kit includes high-performance polyurethane bushings and Grade 8 mounting hardware for a long-lasting, secure installation using factory mounting points.

• Reduces excessive body roll for improved safety and cornering performance
• Cold-formed solid steel construction with swedged ends for maximum durability
• Gunmetal grey powder-coated finish for a long-lasting, corrosion-resistant surface
• Includes high-grade polyurethane bushings and Grade 8 mounting hardware
• Designed to improve handling without affecting overall ride comfort
• Manufacturer Part Number: 5404

Fits 1999-2007 Chevrolet Silverado 1500 and GMC Sierra 1500 2WD (including Classic models).

Improve the handling and steering response of your Sport Truck or SUV with the Belltech Front Anti-Sway Bar. Designed to eliminate the "boat-like" body roll common in stock trucks, this performance sway bar keeps your vehicle flat through corners for a more confident and stable driving experience without compromising ride quality.

Engineering for durability, these bars are manufactured from cold-formed solid steel and feature swedged ends for maximum strength. The assembly is finished in a gunmetal grey powder coat for long-lasting corrosion resistance and includes all necessary mounting components for a direct installation.

• Part Number: 5402
• Construction: Cold-formed solid steel
• Finish: Gunmetal grey powder coat
• Hardware: High-grade (Grade 8) mounting hardware included
• Bushings: Performance polyurethane bushings for reduced deflection
• Design: Swedged ends for superior reliability
• Reduces excessive body roll and improves turn-in response

Fits select 1988-2000 Chevrolet C1500, C2500, C3500, Suburban, Tahoe, and GMC Sierra, Suburban, and Yukon models.

The Belltech Front Anti-Sway Bar (MPN 5400) is engineered to significantly improve the handling and steering response of your GM truck or SUV by minimizing body roll. By increasing the lateral stiffness of the chassis, this bar keeps the vehicle flatter through corners, providing a more stable and confident driving experience without compromising ride quality.

Constructed from cold-formed solid steel, these bars feature swedged ends for superior strength and reliability under heavy loads. Each bar is finished with a durable gunmetal grey powder coating for long-term corrosion resistance and includes high-performance polyurethane bushings to ensure crisp response over factory rubber components.

• Manufactured from high-strength, cold-formed solid steel
• Reduces excessive body roll for improved cornering stability
• Swedged ends for increased structural integrity
• Powder-coated gunmetal grey finish for durability
• Includes high-grade mounting hardware and polyurethane bushings
• Designed for straightforward installation using Grade 8 hardware

Fits 2020-2026 Chevrolet Corvette Stingray.

The aFe CONTROL rear sway bar is designed to provide C8 Corvette owners with precise handling and adjustable roll resistance. This 3-way adjustable bar allows for fine-tuning the chassis balance to eliminate understeer or oversteer depending on your driving style. Each bar is CAD-designed and CNC-bent from lightweight, high-strength 1026 DOM steel tubing to ensure a perfect fit and consistent operation without the weight penalty of solid bars.

Construction features CNC waterjet-cut end plates that are TIG-welded in a specialized fixture for exact hole positioning. The kit includes premium 6061-T6 billet aluminum brackets finished in black anodizing, equipped with integrated grease fittings for easy maintenance. High-durometer 90A polyurethane bushings reduce deflection compared to factory rubber, providing more immediate steering response and flatter cornering.

• 3-Way adjustability for customizable rear roll resistance
• CNC-bent 1026 DOM steel tubular construction
• CNC waterjet-cut rear sway bar end plates, TIG-welded for strength
• 6061-T6 billet aluminum bushing brackets with grease fittings
• 90A durometer low-deflection polyurethane bushings
• Durable signature blue powder coat finish
• Direct-fit installation requires no vehicle modifications
• Manufacturer Part Number: 440-401008RL
• Made in the USA

Fits 2022-2024 Subaru WRX models.

The COBB Rear Sway Bar (CB-R57Z) is a direct bolt-on suspension upgrade designed to significantly improve the handling dynamics of the Subaru WRX. By increasing the rear roll stiffness, this sway bar helps neutralize the factory-tuned understeer and reduces body roll during aggressive cornering. This provides a more balanced chassis and a sharper steering response for a more connected driving experience.

• Reduces body roll for flatter, more stable cornering
• Improves turn-in response and steering precision
• Reduces understeer common in AWD platforms
• Direct replacement for the factory rear sway bar using original mounting points
• Manufacturer Part Number: CB-R57Z

Fits 2022-2024 Subaru WRX models.

The COBB Tuning Front Sway Bar for the 2022-2024 Subaru WRX is engineered to significantly reduce body roll and sharpen the vehicle's handling dynamics. By increasing the lateral stiffness of the front suspension, this upgrade provides more precise steering response and a more planted feel during high-speed cornering and spirited driving maneuvers.

This bar serves as a direct replacement for the factory component, designed to integrate seamlessly with the chassis while providing the increased rate necessary for performance applications. It is an essential upgrade for WRX owners looking to eliminate the "boaty" feel associated with stock suspension and achieve a more neutral handling balance.

• Specifically tuned for the 2022-2024 Subaru WRX (VB) chassis
• Reduces body roll for improved cornering stability and grip
• Enhances steering feedback and turn-in precision
• Direct replacement for the original equipment (OE) front sway bar
• Manufacturer Part Number: CB-F51Z

Fits 2015-2021 Subaru WRX and WRX STI models.

The Cobb 26mm Adjustable Front Sway Bar is engineered to reduce body roll and improve the handling dynamics of your VA-chassis Subaru. By increasing the effective spring rate of the front suspension during cornering, this bar provides sharper turn-in and a more planted feel without compromising ride quality during straight-line travel. The adjustable design allows you to fine-tune the roll stiffness to match your driving style or track conditions.

• Diameter: 26mm
• Adjustability: Multi-hole design for customized stiffness settings
• Reduces body roll and improves steering response
• Designed as a direct replacement for the factory front sway bar
• Manufacturer Part Number: CB-099FZ-26

Fits 2008-2021 Subaru WRX and WRX STI.

The Cobb 24mm Adjustable Rear Sway Bar is a direct-fit upgrade designed to improve the handling characteristics of your Subaru. By increasing the roll stiffness of the rear suspension, this bar effectively reduces body roll during hard cornering and helps neutralize the factory understeer. The adjustable design provides multiple mounting points, allowing you to fine-tune the bar's leverage to match your specific suspension setup or driving environment.

• Diameter: 24mm
• Adjustment Type: Adjustable mounting points for variable stiffness
• System: Rear Suspension
• MPN: CB-013RZ-24
• Fitment: 2008-2021 Subaru WRX and STI

Fits 2008-2021 Subaru WRX and STI.

The Cobb 22mm Adjustable Rear Sway Bar is engineered to significantly improve the handling characteristics of your vehicle by reducing body roll and increasing cornering stiffness. By upgrading the rear sway bar, you can mitigate the factory understeer common in the WRX and STI platforms, resulting in a more neutral and predictable balance. The adjustable design features multiple mounting points, allowing you to fine-tune the bar's effective rate to suit your specific suspension setup or driving environment.

• Diameter: 22mm for increased roll resistance
• Adjustability: Multiple attachment points for custom chassis tuning
• Direct replacement for the factory rear sway bar
• Improves steering response and cornering stability
• Manufacturer Part Number: CB-013RZ-22