Fits select 2015-2024 Dodge Challenger, Charger, Durango, Jeep Grand Cherokee, and Ram 1500 (V8-6.2L).

Improve your Hemi's intake performance with the aFe POWER 97mm throttle body and adapter kit. Designed to replace the factory 92mm unit, this oversized bore increases airflow to enhance horsepower and sharpen throttle response. This upgrade is specifically engineered for supercharged 6.2L applications, providing greater performance gains as additional modifications are added to the vehicle.

Construction features a precision-machined 97mm bore and a direct-fit adapter that utilizes all factory mounting locations for a secure, stable installation. With plug-and-play electronics, this unit integrates seamlessly with the OE harness and requires no ECU tuning for operation.

• 97mm bore diameter (replaces factory 92mm unit)
• Direct bolt-on design with included adapter plate
• Plug-and-play electronics for hassle-free installation
• Maintains factory mounting points and stability
• No ECU tuning required
• Manufacturer Part Number: 46-39114

Vehicle Fitment:

• 2015-2023 Dodge Challenger SRT Hellcat (including Redeye, Widebody, and Jailbreak models)
• 2015-2023 Dodge Charger SRT Hellcat (including Redeye and Jailbreak models)
• 2021-2024 Dodge Durango SRT Hellcat (including Plus models)
• 2018-2021 Jeep Grand Cherokee Trackhawk
• 2021-2024 Ram 1500 TRX

Fits select 2005-2013 Chrysler 300, Dodge Challenger, Charger, Durango, Magnum, Ram, and Jeep Grand Cherokee models. This aFe POWER 90mm Throttle Body and adapter kit is engineered to significantly increase engine airflow by replacing the restrictive stock 80mm unit. The larger 90mm bore diameter allows for higher air volume, translating into improved throttle response and increased horsepower, especially on vehicles with existing intake or exhaust modifications.

The included adapter is precision CNC-machined from 6061-T6 billet aluminum for exceptional strength and weight reduction. It features a unique Serrated/Swirl combination design that induces intake turbulence within the combustion chamber. This turbulence helps atomize fuel for a more complete combustion cycle, optimizing torque and engine efficiency. Designed for a hassle-free installation, the kit utilizes all factory mounting locations and features plug-and-play electronics that require no aftermarket tuning.

• Increased Airflow: 90mm bore diameter replaces the factory 80mm throttle body.
• Billet Construction: Adapter machined from 6061-T6 billet aluminum with a precision finish.
• Performance Design: Serrated/Swirl design improves fuel atomization through intake turbulence.
• Simple Installation: Direct bolt-on design with plug-and-play electronics and included gasket.
• No Tuning Required: Engineered to work with the factory ECU calibration.
• MPN: 46-39112

Fits select 2009-2015 Cadillac, Chevrolet, GMC, and Hummer models (V8-5.3L / 6.2L).

Optimize your engine's intake efficiency with the aFe POWER 92mm Throttle Body and adapter kit. Designed to replace the restrictive stock 87mm unit, this upgrade significantly increases airflow to the manifold. By allowing a higher volume of air into the combustion chamber, this kit improves throttle response and provides measurable horsepower gains that become even more pronounced when paired with other intake or exhaust modifications.

Engineered for a seamless installation, this kit utilizes all factory mounting locations for a secure fit. The integrated plug-and-play electronics ensure full compatibility with your vehicle's ECU, meaning no custom tuning is required for operation. This is a direct bolt-on solution for enthusiasts seeking better performance without the complexity of a custom build.

• Bore Diameter: 92mm (upgraded from stock 87mm)
• Installation: Direct bolt-on using factory mounting points
• Electronics: Plug-and-play for hassle-free integration
• Tuning: No tuning required
• Manufacturer Part Number: 46-39111
• Includes: Throttle body, adapter plate, and necessary hardware

Fits select 2013-2025 Chrysler 300, Dodge Challenger, Charger, and Durango, Jeep Grand Cherokee, Wagoneer, and Wrangler, and Ram 1500, 2500, and 3500 (V8-5.7L / 6.4L).

The aFe POWER 90mm Throttle Body and Adapter Kit is engineered to maximize engine airflow by replacing the restrictive factory 80mm unit. This substantial increase in bore diameter allows for higher air volume, translating into improved horsepower and sharper throttle response. The kit features a precision-machined 6061-T6 billet aluminum adapter with a unique Serrated/Swirl combination design. This internal geometry creates intake turbulence that improves fuel atomization within the combustion chamber for a more efficient burn.

Designed for a hassle-free installation, this kit utilizes all factory mounting points and includes plug-and-play electronics that require no additional tuning. While it bolts directly to the factory manifold, aFe recommends pairing this upgrade with a cold air intake and a 3.75-inch (95mm) I.D. coupler to optimize the increased airflow capacity.

• Bore Diameter: 90mm (upgraded from stock 80mm)
• Adapter Material: Precision-machined 6061-T6 billet aluminum
• Installation: Direct bolt-on with plug-and-play electronics
• Performance: Enhanced torque and throttle response without tuning
• Included Hardware: Adapter, gasket, and necessary mounting hardware
• Manufacturer Part Number: 46-39107

Fits 2013-2020 Subaru BRZ, 2017-2020 Toyota 86, and 2013-2016 Scion FR-S.

This aFe POWER throttle body kit is engineered to increase engine airflow by replacing the restrictive factory 65mm unit with a larger 70mm bore. This increase in diameter allows for higher air volume to reach the combustion chamber, improving throttle response and power delivery, particularly on vehicles with existing intake or exhaust modifications. The kit includes a precision-machined 6061-T6 billet aluminum adapter featuring a unique Serrated/Swirl design. This internal geometry creates intake turbulence that improves fuel atomization for a more efficient combustion cycle.

Designed for a straightforward installation, the kit utilizes all factory mounting locations and features plug-and-play electronics that require no wire splicing or ECU tuning. The billet adapter provides a high-strength, lightweight connection between the throttle body and intake manifold for a reliable seal under all operating conditions.

• 70mm bore diameter (upgraded from stock 65mm)
• Precision-machined 6061-T6 billet aluminum adapter
• Serrated/Swirl design for improved intake turbulence and fuel atomization
• Plug-and-play electronics for a hassle-free install
• Direct bolt-on fitment using factory mounting points
• Includes all necessary gaskets and hardware
• Manufacturer Part Number: 46-39106

Fits select 2011-2025 Chrysler 300, Dodge Challenger, Charger, and Durango, Jeep Grand Cherokee and Wrangler, and Ram 1500 models.

The aFe POWER 80mm Throttle Body and Adapter Kit is engineered to eliminate intake restriction by replacing the factory 74mm unit. By increasing the bore diameter to 80mm, this kit delivers a higher volume of air to the intake manifold, resulting in improved throttle response and increased horsepower. The included adapter is precision CNC-machined from 6061-T6 billet aluminum for high strength and a precise fit.

This kit features a unique Serrated/Swirl combination design on the adapter bore. This geometry creates intake turbulence in the combustion chamber, promoting a more complete fuel-air mixture for optimized combustion. Designed as a direct bolt-on solution, the kit utilizes factory mounting locations and includes plug-and-play electronics, requiring no ECU tuning for operation.

• 80mm bore diameter (replaces factory 74mm unit)
• 6061-T6 billet aluminum adapter for durability and lightweight performance
• Serrated/Swirl design increases intake turbulence for better combustion
• Plug-and-play electronics for a hassle-free installation
• No ECU tuning required
• Includes wiring harness, gaskets, and all necessary mounting hardware
• Manufacturer Part Number: 46-39105

Note: For optimal performance and easiest installation, use with an aFe cold air intake and a 3.50-inch (89mm) I.D. coupler at the throttle body.

Fits 2022-2025 Toyota GR86 and Subaru BRZ models. This aFe POWER 76mm throttle body and adapter kit is designed to increase engine airflow by replacing the restrictive factory 70mm unit with a larger 76mm bore diameter. This upgrade enhances horsepower and throttle response, providing more significant performance gains as additional modifications are added to the vehicle.

The included adapter is precision-machined from 6061-T6 billet aluminum for high strength, weight reduction, and a perfect fit. It features a unique Serrated/Swirl combination design that creates intake turbulence within the combustion chamber. This turbulence helps atomize the fuel more effectively, resulting in a more complete combustion cycle for improved torque and engine efficiency.

Designed for a straightforward installation, the kit utilizes all factory mounting locations and includes plug-and-play electronics that require no aftermarket tuning. All necessary hardware and gaskets are provided for a hassle-free, direct bolt-on upgrade.

• Bore Diameter: 76mm (replaces OE 70mm)
• Material: CNC-machined 6061-T6 billet aluminum adapter
• Design: Serrated/Swirl intake design for improved atomization
• Electronics: Integrated plug-and-play connectors
• Installation: Direct bolt-on; no tuning required
• Manufacturer Part Number: 46-39104

Fits select 2003-2015 Toyota 4Runner, FJ Cruiser, Tacoma, and Tundra models (V6-4.0L). This aFe POWER 76mm Billet Throttle Body and adapter kit is engineered to increase engine airflow by replacing the restrictive 65mm factory throttle body. The larger 76mm bore diameter provides a significant increase in air volume, resulting in improved horsepower, torque, and throttle response.

The kit includes a precision-machined 6061-T6 billet aluminum adapter designed for high strength and weight savings. This adapter features a unique Serrated/Swirl internal design which creates intake turbulence to better atomize fuel for more efficient combustion. This direct bolt-on kit is compatible with both factory and aFe POWER cold air intakes and uses plug-and-play electronics for a simple installation. Note: Some vehicles may experience a temporary high idle during the ECU learning phase, which typically resolves within 800 miles.

• 76mm bore diameter increases airflow over the stock 65mm unit
• Precision-machined 6061-T6 billet aluminum adapter
• Serrated/Swirl combination design for improved combustion efficiency
• No tuning required; compatible with OEM or aftermarket intake systems
• Direct bolt-on installation using factory mounting points
• Includes all necessary hardware, gasket, and plug-and-play electronics
• Manufacturer Part Number: 46-39103

Fits select 2010-2024 Toyota 4Runner, FJ Cruiser, Tacoma, and Tundra models (V6-4.0L).

The aFe POWER 76mm Billet Throttle Body is a direct-fit performance upgrade designed to replace the restrictive factory 70mm unit. By increasing the bore diameter to 76mm, this kit significantly enhances airflow to the intake manifold, improving throttle response and providing additional overhead for vehicles with existing bolt-on modifications. It is fully compatible with both OEM and aFe POWER cold air intake systems.

This kit features a precision-machined 6061-T6 billet aluminum adapter with a unique Serrated/Swirl combination design. This internal geometry creates intake turbulence within the combustion chamber, promoting a more complete air-fuel mixture for optimized combustion. The plug-and-play electronics require no harness modification or aftermarket tuning, and the unit bolts directly to factory mounting locations for a straightforward installation.

• 76mm bore diameter (upgraded from stock 70mm)
• Precision-machined 6061-T6 billet aluminum adapter
• Serrated/Swirl internal design for improved air/fuel atomization
• No tuning required; plug-and-play electronic integration
• Compatible with OEM or aFe POWER cold air intake systems
• Includes all necessary hardware and gaskets for installation
• Manufacturer Part Number: 46-39102

Note: Some vehicles may experience a temporary high idle immediately following installation. The ECU typically adjusts the idle control within 800 miles of driving as it completes the relearn process.

Fits select 2018-2025 Ford Mustang, F-150, and Super Duty F-250/F-350 models equipped with the 5.0L engine. This high-performance upgrade replaces the factory 80mm unit with a precision-engineered 85mm bore, optimized for increased airflow without requiring custom tuning.

Constructed from CNC-machined 6061-T6 billet aluminum, the aFe Power 46-39101 features an aerodynamically designed flow path and a black anodized finish. Unlike cast alternatives, this throttle body uses a brass throttle plate to eliminate the risk of galling against the aluminum housing. The 85mm diameter is specifically chosen to provide a direct, unobstructed path into the 84mm factory intake manifold opening, ensuring compatibility with stock intake tubes and aftermarket cold air intakes alike.

• Bore Diameter: 85mm (Upgraded from 80mm OE)
• Material: 6061-T6 Billet Aluminum with Brass Throttle Plate
• Finish: Stealthy Black Anodized with Laser-Etched Logo
• Power Gains: Dyno-proven +17 HP and +15 lb-ft Torque (tested on 2020 Mustang GT)
• Installation: Simple bolt-on process takes less than 1 hour; retains OEM electronics and gearing
• No Tuning Required: Engine management adjusts automatically to the increased flow
• Included: All necessary hardware and serialized for authenticity
• Part Number: 46-39101