Fits select 2005-2026 Chrysler 300 and Aspen; Dodge Challenger, Charger, Durango, and Ram; Jeep Grand Cherokee, Wrangler, and Wagoneer; and Ram 1500, 2500, and 3500 models with Hemi engines.

This Granatelli Motor Sports drive-by-wire throttle body is engineered to improve airflow and throttle response in high-performance Hemi-equipped vehicles. Featuring a precision-machined 95mm bore, this unit provides a significant increase in intake volume compared to the factory equipment. The assembly is a direct bolt-on upgrade, utilizing the vehicle's existing mounting points and electrical connectors for a clean, professional installation.

• Bore Size: 95mm
• Finish: Black Anodized
• Operation: Electronic Drive-By-Wire (DBW)
• Fitment: Replaces factory throttle body with no modifications required
• Part Number: GMTBHLCB

Optimize your engine's intake efficiency with the Granatelli Motor Works 95mm Direct Bolt-On Drive-By-Wire Throttle Body (GMTBHLC). This high-flow throttle body fits select 2013-2021 Chrysler 300, Dodge Challenger, Charger, Durango, Jeep Grand Cherokee, and Ram 1500, 2500, and 3500 models.

Engineered to replace the restrictive factory unit, this 95mm bore throttle body increases airflow to improve throttle response and power delivery across the RPM range. As a precision-manufactured drive-by-wire component, it features internal electronics designed to communicate with the factory ECU, ensuring a straightforward installation to the factory mounting points without the need for adapter plates.

• Precision-machined 95mm bore for significantly increased air volume over stock
• Direct bolt-on replacement for factory drive-by-wire (DBW) units
• Cast aluminum construction with a natural finish
• Designed to improve throttle response and eliminate intake restriction
• Compatible with factory electrical connectors
• Manufacturer Part Number: GMTBHLC

Fits 2013-2020 Scion FR-S, Subaru BRZ, and Toyota 86.

The Grams Performance DBW (Drive-By-Wire) Electronic Throttle Body is a critical upgrade for modified engines requiring increased airflow to maximize power. This unit features a precision-honed, oversized 72mm bore, providing a 50% increase in airflow over the factory 64mm throttle body. Designed for both high-output naturally aspirated builds and forced induction applications, it ensures your engine isn't choked at high RPM.

Each unit is CNC machined from 6061-T6 billet aluminum for maximum durability and features a non-contact Hall Effect TPS for a more reliable, optimized response curve. The high-precision servo motor and aluminum throttle plate provide consistent performance under extreme conditions. This kit is designed for a straightforward installation and includes the necessary wiring harness adapter.

• Manufacturer Part Number: G09-12-0100
• Oversized 72mm bore for 50% more airflow than stock (64mm)
• CNC machined 6061-T6 billet aluminum housing
• Factory programmable non-contact Hall Effect TPS
• High-precision servo motor and aluminum throttle plate
• Optimized TPS response curve
• Wiring harness adapter included for easy installation

Fits 2002-2003 Volkswagen Golf GTI (1.8T) and 2003 GTI 20th Anniversary models.

A larger throttle body is essential for maximizing power on modified 1.8T engines with increased airflow requirements. This Grams Performance and Design MKIV throttle body features a precision-machined 70mm bore, providing a significant increase in flow capacity over the factory unit. This upgrade is particularly effective for heavily modified naturally aspirated builds and forced induction applications where the stock throttle body becomes a bottleneck.

• Bore Size: 70mm
• Operation: Drive-By-Wire (DBW)
• Finish: Black
• Increased airflow capacity for high-horsepower builds
• Maintains factory-style electronic control integration
• Manufacturer Part Number: G09-09-0700

Fits 2004-2006 Audi A4 and A4 Quattro models (2.0T).

The Grams Performance 70mm Drive-By-Wire (DBW) Throttle Body is a high-performance upgrade designed to provide a substantial increase in airflow over the restrictive factory unit. Each unit is CNC machined from 6061-T6 billet aluminum and features a precision-honed 70mm bore, delivering the volume necessary for tuned or modified 2.0T engines. This throttle body is a true plug-and-play solution that requires no adapters, utilizing the factory electrical connections for a seamless installation.

Equipped with a high-torque precision servo motor and a non-contact Hall Effect Throttle Position Sensor (TPS), this unit offers superior reliability and an optimized response curve. The programmable TPS ensures accurate feedback to the ECU, maintaining smooth operation and crisp throttle transitions.

• Bore Size: 70mm ID
• Material: CNC machined 6061-T6 billet aluminum
• Finish: Black anodized
• Integrated high-torque precision servo motor
• Factory programmable non-contact Hall Effect TPS
• Durable aluminum throttle plate
• Plug-and-play installation; no wiring adapters needed
• Manufacturer Part Number: G09-09-0070

Fits 2007-2014 Ford Mustang Shelby GT500 and GT500KR (4.6L).

This Ford Racing throttle body is engineered as a direct stock replacement for the original equipment assembly. Designed to restore factory-spec airflow and throttle response, this 55mm unit is constructed from high-quality materials to provide durable and reliable performance under high-load conditions. As a bolt-on replacement, it ensures a seamless fit with factory intake components.

• Manufacturer Part Number: M-9926-MSVT
• Bore Size: 55mm
• Type: Stock Replacement
• Fitment: 2007-2014 Mustang Shelby GT500 / GT500KR
• Construction: High-quality housing and internal components for longevity

Fits select 2020-2022 Ford Mustang Shelby GT350, GT350R, and GT500 (4.6L).

This Ford Racing 92mm throttle body is engineered to optimize airflow for high-performance late-model Mustang applications. Designed as a direct-fit component for use with the Ford Performance M-9424-73LP manifold, it ensures precise throttle response and reliable operation. This assembly replaces or upgrades the factory unit to help maintain peak intake efficiency, using high-quality materials to withstand high-demand driving environments.

• Bore Size: 92mm
• Manufacturer Part Number: M-9926-M5292
• Compatible Manifold: Ford Performance M-9424-73LP
• Included Hardware: (4) Mounting bolts

Fits select 2015-2020 Ford Mustang models including GT, GT350/GT350R, GT500, Bullitt, EcoBoost, and V6 (5.2L / 4.6L).

Improve your engine's intake efficiency with the Ford Racing 87mm Throttle Body. As a precision-engineered component (MPN: M-9926-M52), this unit is designed to provide reliable airflow management and consistent throttle response. Constructed from high-quality materials to meet rigorous performance standards, it serves as a direct-fit replacement for specified Mustang applications. Whether maintaining a stock Shelby GT350 or upgrading a modified GT, this throttle body ensures durable operation under demanding conditions.

• Bore Diameter: 87mm
• Manufacturer Part Number: M-9926-M52
• Installation: Direct bolt-on replacement for factory housing
• Materials: High-grade aluminum housing and durable internal actuators
• Engine Compatibility: Optimized for 5.2L and 4.6L displacements

Fits 2018-2020 Ford Mustang Bullitt, GT, and GT Premium models (5.0L).

This 87mm throttle body is the Original Equipment (OE) component found on the 2019 Mustang Bullitt. It serves as a precision-engineered airflow upgrade for 2018-2020 Mustang GT models, offering a larger bore to improve intake efficiency and engine response. Because this unit alters the airflow characteristics of the 5.0L Coyote engine, a custom engine calibration (tune) is strictly required for installation and operation.

• 87mm bore diameter for increased induction capacity
• Original Equipment on the 2019 Mustang Bullitt
• Includes required mounting fasteners
• Requires custom engine calibration (not included)
• Manufacturer Part Number: M-9926-M50B

Fits 2011-2014 Ford Mustang GT.

The Ford Racing 65mm Cobra Jet Billet Aluminum Throttle Body (M-9926-CJ65) is engineered to significantly increase airflow into the intake manifold, providing a necessary upgrade for high-performance builds. Unlike cast alternatives, this unit is precision-machined from high-quality billet aluminum to ensure tight tolerances and consistent performance under high-vacuum or forced induction applications.

Designed as a direct replacement for the factory unit, it maintains excellent low-speed drivability and throttle response. This assembly is built to accept all stock sensors and electronics, making it a bolt-on solution for 5.0L Coyote owners looking to maximize their engine's breathing capacity.

• Bore Size: Dual 65mm for increased air volume
• Material: Precision-machined billet aluminum construction
• Compatibility: Accepts all factory sensors and control modules
• Installation: Bolts directly into the factory location
• Manufacturer Part Number: M-9926-CJ65

Fits select 2005-2010 Ford Mustang GT, Bullitt, and Shelby GT models.

Increase airflow and engine performance with the Ford Racing Hi-Flow Twin 62mm Billet Throttle Body. Precision-machined from billet aluminum, this throttle body is rated at 1306 CFM to provide a significant increase in volume over the factory unit while maintaining excellent low-speed drivability and idle control. It comes fully assembled with the Throttle Position Sensor (TPS) and actuator motor pre-installed for a direct-replacement installation.

• Twin 62mm bore diameter
• 1306 CFM airflow rating
• Precision-machined from billet aluminum with a polished finish
• CNC-etched Ford Racing logo
• Fully assembled with factory throttle position sensor and actuator motor
• Calibrated for idle air flow using original production procedures
• Made in the USA
• Manufacturer Part Number: M-9926-3V

Note: Custom engine calibration is required for proper operation and is not included with this component.

Fits 2015-2017 Ford Mustang GT.

The Ford Racing 87mm Throttle Body Adapter (M-9474-M5087) is engineered to facilitate the installation of a larger 87mm throttle body onto the factory intake manifold of the 5.0L Coyote engine. This precision-machined adapter ensures proper alignment and a secure seal, allowing for optimized airflow transitions into the plenum. It is a direct-fit solution for enthusiasts looking to integrate larger induction components into their 2015-2017 Mustang GT.

• Manufacturer Part Number: M-9474-M5087
• Adapter Bore Size: 87mm
• Includes (4) high-strength throttle body mounting bolts
• Direct-fit for 2015-2017 Mustang GT applications

Fits select GM Gen IV LS engines including LS3, LS7, L76, L77, and L99 applications.

The FAST Big Mouth 102mm Electronic Throttle Body (54104) is a clean-sheet design engineered specifically for high-performance drive-by-wire (DBW) applications. Featuring a full 102mm bore, this unit significantly increases airflow over stock components, making it an ideal match for FAST manifolds or high-flow aftermarket intake systems. Unlike modified stock units, this throttle body utilizes a proprietary high-torque motor for superior response times and a steady blade position even in high-boost environments.

Built for long-term reliability, it incorporates a dual return spring and a precision non-contact Throttle Position Sensor (TPS). The satin black anodized finish provides a durable, professional aesthetic for any engine bay.

• 102mm bore diameter for maximum airflow and reduced restriction
• Designed for GM Gen IV LS factory ECUs and aftermarket systems like Edelbrock ProFlo4+
• High-torque motor prevents blade flutter under boost
• Non-contact TPS and dual return springs for increased reliability
• Clean-sheet design with no reused stock components
• Satin black anodized finish
• Manufacturer Part Number: 54104

Optimized for high-performance GM LS-based engines, the FAST LSX Big Mouth 102mm Throttle Body (MPN 54102) provides the increased airflow required for high-horsepower naturally aspirated and forced induction builds. This throttle body is engineered to solve common blade-flex issues by using a thicker blade design that eliminates deflection under high vacuum or boost conditions.

The Big Mouth series features a unique offset blade pivot, which facilitates a smoother transition for incoming air compared to standard designs. To ensure consistent throttle response and longevity, FAST has reinforced the linkage and spring mechanism, providing a more robust and reliable feel during performance driving.

• 102mm bore diameter for maximum airflow capacity
• Increased blade thickness prevents bending or deflection
• Smoother offset blade pivot reduces intake turbulence
• Reinforced linkage and heavy-duty spring mechanism
• Precision-machined billet construction
• Manufacturer Part Number: 54102

Fits select vehicles equipped with 5.0L engines using 4150-style square-bore intake manifolds. The Edelbrock 3848 Low Profile Intake Elbow is engineered specifically for applications with limited hood clearance, providing a high-flow solution for EFI conversions.

This versatile cast aluminum adapter allows you to mount a 90mm or Ford-style throttle body to any Victor EFI square-bore (4150) manifold. Its design allows for flexible positioning, mounting in forward, backward, or sideways configurations to suit your specific engine bay layout. For Small Block or Big Block Chevy applications in a forward-mount configuration, a one-inch spacer is required to provide necessary clearance for the water neck.

• Manufacturer Part Number: 3848
• Finish: As-Cast
• Throttle Bore Center: 7.00" forward and 2.00" above the manifold flange
• Throttle Body Angle: 5-degree downward tilt
• Throttle Body Compatibility: LS1, LS2, and Ford 5.0L based patterns
• Manifold Compatibility: Standard 4150-style square-bore manifolds
• Special Notes: Cowl trimming and an SS hood are required when paired with Victor Jr LS1 #29085 manifolds

Fits select 1999-2018 Porsche 911, Boxster, Cayenne, Cayman, Macan, and Panamera models.

This Bosch Electronic Throttle Body Assembly is a direct-replacement OE component designed to regulate the air intake for precise combustion in modern gasoline engines. As a critical part of the electronic throttle control (ETC) system, this assembly ensures consistent idle speed and responsive acceleration by accurately managing the volume of fresh air entering the intake manifold.

• Integrated unit includes the electronic actuator, throttle plate, and throttle position sensor (potentiometer) within a single housing.
• Precision-engineered by the original equipment manufacturer to meet exact fitment and calibration standards.
• Restores factory throttle response and eliminates issues related to worn or failing sensors and actuators.
• Manufacturer Part Number: 0280750474
• OE Cross-Reference: 99760511501, 99760511502

Fits select 2005-2018 Porsche 911, 918 Spyder, Cayenne, and Panamera models.

The Bosch Electronic Throttle Body Assembly is a precision-engineered direct replacement for your Porsche’s factory unit. As a critical component of the electronic throttle control (ETC) system, this assembly regulates the volume of fresh air entering the intake manifold. Replacing a worn or contaminated throttle body restores factory-spec idle stability and eliminates the hesitation or "limp mode" errors often caused by failing internal potentiometers.

This assembly features a fully integrated design, housing the throttle plate, electronic actuator motor, and the throttle position sensor (potentiometer) within a single robust unit. Manufactured to OE specifications, it ensures exact fitment and calibration for a seamless installation.

• Manufacturer Part Number: 0280750473
• OE Reference Number: 99760511601
• Restores precise throttle response and engine performance
• Integrated dual potentiometer sensors for accurate ECU feedback
• Direct bolt-on replacement for the factory intake assembly
• Manufactured by the original equipment supplier for Porsche

Restore factory-standard airflow control and engine performance with the Bosch Electronic Throttle Body Assembly (0280750156). As a leading Original Equipment (OE) manufacturer, Bosch builds these units to exact tolerances to ensure seamless communication with the engine control unit (ECU) and precise butterfly valve positioning.

This assembly is a direct replacement for a worn or failing factory unit, solving common issues such as erratic idling, poor throttle response, or limp-mode triggers caused by electronic actuator failure. Every unit features a high-torque internal motor and integrated throttle position sensor designed to handle the thermal and vibrational stress of the engine bay environment.

• Manufacturer Part Number: 0280750156
• Quality Standards: Manufactured to OE specifications for plug-and-play installation
• Performance: Calibrated for consistent idle stability and linear throttle response
• Construction: High-grade aluminum housing with sealed electronics

Fits select 2002-2011 Acura and Honda models (RSX, TSX, Civic, Accord, CR-V, and Element) equipped with K-Series engines.

This BLOX Racing throttle body adapter provides a precision-engineered solution for enthusiasts installing an RBC intake manifold onto their K-Series engine. It allows for the use of a standard K-series throttle body while maintaining a 62.5mm bore for consistent airflow. Machined for an exact fit, this adapter ensures a reliable seal between the throttle body and the manifold plenum, resolving the bolt pattern mismatch common in RBC manifold swaps.

• Manufacturer Part Number: BXIM-10300-62.5
• Bore Size: 62.5mm
• Application: Adapts K-Series throttle bodies to RBC manifolds
• Construction: Precision-machined for optimal sealing and durability

Vehicle Fitment

Designed for high-performance builds, the BLOX Racing Tuner Series 72mm Cast Aluminum Throttle Body (BXIM-00224) is engineered to maximize intake airflow for K-Series engines. This oversized 72mm bore is a critical upgrade for forced induction or high-output naturally aspirated applications where the factory unit restricts power potential.

• Bore Size: 72mm
• Material: Precision cast aluminum construction
• Product Line: Tuner Series
• Manufacturer Part Number: BXIM-00224
• Engine Compatibility: K-Series

The precision-machined throttle plate and heavy-duty hardware ensure reliable operation and consistent throttle response under high-load conditions.

Fits Honda Civic (1.5T).

The BLOX Racing 58mm Drive-By-Wire (DBW) Throttle Body is designed to optimize airflow and enhance throttle response for the Honda 1.5L turbocharged engine. By increasing the internal bore diameter to 58mm, this component reduces the intake restriction found in the factory unit, allowing for higher volume air delivery to the intake manifold—a vital improvement for maximizing performance in forced induction applications.

Constructed for durability and precision, this unit integrates seamlessly with the original electronics, maintaining full compatibility with the factory DBW system. It is a direct-fit replacement that provides a reliable solution for tuners and enthusiasts seeking to improve the efficiency of their vehicle's induction system.

• Bore Size: 58mm
• Configuration: Drive-By-Wire (DBW)
• Direct-fit bolt-on installation
• Manufacturer Part Number: BXIM-00221

Fits 1988-2001 Acura Integra and Honda Civic, Civic del Sol, CR-V, CRX, and Prelude models (B/D/H/F-series engines).

The BLOX Racing Tuner Series throttle body is a cost-effective performance upgrade designed to increase airflow to the intake manifold, improving throttle response and power across the RPM range. Each unit is precision-cast from high-quality aluminum and features a 70mm bore, significantly reducing intake restrictions compared to the factory component. It is an essential modification for enthusiasts looking to optimize the induction system of their Honda or Acura powerplant.

• Bore Diameter: 70mm
• Material: High-quality cast aluminum
• Product Line: Tuner Series
• Manufacturer Part Number: BXIM-00213
• Compatibility: Honda B, D, H, and F-series engines

Fits select 1988-2001 Honda Civic, CRX, Prelude, CR-V, del Sol, and Acura Integra (B/D/H/F-Series Engines).

The BLOX Racing Tuner Series 68mm throttle body is a performance upgrade designed to increase intake airflow and improve throttle response on Honda B, D, H, and F-series engines. Cast from high-quality aluminum and precision-machined, this unit replaces the restrictive factory throttle body with a larger 68mm bore, making it ideal for naturally aspirated or forced induction builds requiring higher air volume.

• Bore Size: 68mm
• Material: Precision Cast Aluminum
• Product Line: Tuner Series
• Manufacturer Part Number: BXIM-00212
• Direct-fit for many B, D, H, and F-series intake manifolds
• Compatible with factory sensors

Fits 1988-2001 Honda Civic, CRX, Prelude, CR-V, del Sol, and Acura Integra (B/D/H/F-Series Engines).

The BLOX Racing Tuner Series 66mm Throttle Body is a precision-engineered performance upgrade designed to increase airflow and enhance throttle response. Cast from high-quality aluminum, this 66mm bore unit optimizes intake efficiency for B, D, H, and F-series engines. By increasing the bore diameter, this throttle body allows for a higher volume of air to enter the intake manifold compared to the restrictive factory component.

• 66mm bore diameter for increased air induction
• Precision-cast aluminum construction for durability
• Designed to retain factory sensor mounting locations
• Engineered for the Tuner Series performance line
• Manufacturer Part Number: BXIM-00211

Enhance the induction efficiency of your Honda powerplant with the BLOX Racing 70mm Billet Throttle Body V2. This precision-engineered upgrade is CNC-machined from high-quality billet aluminum, providing a significant increase in bore size over factory units to support higher horsepower and improved throttle response. Designed for both naturally aspirated and forced induction applications, the V2 series features refined internal tolerances for consistent performance.

• Bore Size: 70mm to maximize airflow into the intake manifold
• Material: Precision-machined billet aluminum construction
• Finish: Anodized silver for long-lasting corrosion resistance
• Design: V2 updated internals for smooth butterfly operation
• Fitment: Engineered for Honda B-Series, D-Series, H-Series, and F-Series engines
• Hardware: Compatible with factory sensor mounting points
• Manufacturer Part Number: BXIM-00202-SI-V2

By increasing the throttle bore to 70mm, this unit reduces intake restriction, allowing your engine to breathe more effectively at high RPMs. It is a direct-fit solution for enthusiasts looking to optimize their intake system without compromising reliability.

Fits select 1987-1997 Ford F-150, F-250, F-350, Bronco, Explorer, E-Series, and Country Squire (5.0L / 5.8L).

The BBK Power Plus Series twin 61mm throttle body is a direct replacement for the restrictive factory housing on Ford 302 and 351W engines. Designed to increase airflow by up to 30%, this unit improves horsepower, torque, and throttle response while maintaining OEM-level drivability. It is compatible with the factory tune, making it a true bolt-on performance upgrade that does not require additional software adjustments.

Each BBK throttle body is CNC-machined from a premium 356 aluminum casting and assembled with high-durability components, including double sealed bearings, O-ringed throttle shafts, and OEM-style die-stamped linkages. This 50-state legal part is CARB approved and manufactured in the USA.

• Manufacturer Part Number: 3503
• Twin 61mm throttle bores for maximum airflow
• High-quality 356 aluminum construction
• Double sealed bearings and O-ringed shafts
• CARB approved and 50-state emissions legal
• Direct replacement for factory unit; no tune required
• Made in the USA

Fits select 1987-1997 Ford Bronco, F-150, F-250, F-350, E-150/250/350 Econoline, Explorer, and Country Squire (302 / 351W).

The BBK Power Plus Series twin 56mm throttle body is engineered as a direct-fit replacement to eliminate the airflow restrictions of the factory intake. This CNC-machined unit provides up to a 30% increase in airflow over stock, resulting in improved horsepower, torque, and throttle response without sacrificing OEM driveability. Designed for a true bolt-on installation, this throttle body works with the factory tune and is 50-state emissions legal.

Each unit is cast from high-quality 356 aluminum and fully assembled with premium hardware, including double-sealed bearings and O-ringed throttle shafts for long-term reliability. The throttle linkages are die-stamped in an OEM style to ensure perfect compatibility with your factory cables.

• Bore Size: Twin 56mm throttle bores for maximum volume
• Material: CNC-machined 356 aluminum casting
• Legal Status: 50-state legal (CARB approved)
• Installation: Direct bolt-on; no tuning required
• Features: Double-sealed bearings and O-ringed throttle shafts
• Origin: Made in the USA
• Part Number: 3501

Fits 2018-2023 Ford Mustang (GT, Bullitt, Mach 1) and 2018-2020 Ford F-150 (5.0L).

The BBK Power Plus 85mm Performance Throttle Body is a precision-engineered upgrade designed to replace the restrictive factory unit on your Coyote-powered Ford. By increasing the bore to 85mm, this throttle body delivers up to 30% more airflow than stock, providing immediate improvements in throttle response, horsepower, and torque for naturally aspirated street applications.

Each unit is CNC machined from high-quality 356 aluminum castings to ensure a perfect fit and long-term durability. BBK maintains OEM-style drivability by utilizing double-sealed bearings, O-ringed throttle shafts, and die-stamped throttle linkages. This unit comes fully assembled with new electronics, making it a true direct bolt-on replacement for your factory induction system.

• Bore Size: 85mm (up to 30% airflow increase over stock)
• Material: CNC Machined 356 Aluminum Casting
• Hardware: Double-sealed bearings and O-ringed throttle shafts
• Electronics: Includes all new pre-installed electronics
• Installation: Simple direct bolt-on replacement
• Emissions: 50-State Legal (CARB EO covers 2018-2019 models only)
• Manufacturer Part Number: 1940

Fits select 2017-2024 Ford Expedition, Explorer, F-150, and Police Interceptor Utility (3.5L).

The BBK Performance Black Series Billet Throttle Body (MPN 1924) replaces the restrictive factory unit with a high-flow 73mm bore, significantly improving throttle response and increasing airflow for turbocharged 3.5L EcoBoost engines. Precision CNC-machined from solid billet aluminum, this component is built to withstand the high-pressure demands of forced induction while maintaining factory-level idle control.

This throttle body arrives ready for a direct bolt-on installation, featuring pre-installed new OE-style electronics to eliminate the need for transferring sensitive components from the original part. To ensure long-term durability under boost, BBK utilizes high-quality internal throttle gears, double-sealed bearings, and o-ringed throttle shafts for a leak-free seal.

• CNC-machined billet aluminum body for superior strength and tolerances
• Large 73mm bore improves volumetric efficiency and power output
• Corrosion-resistant black anodized finish with machined BBK logo
• Complete assembly includes new OE electronics and internal hardware
• Double sealed bearings and o-ringed throttle shafts for boost reliability
• Direct bolt-on fitment; CARB EO applies to 2017-2019 models only
• Manufacturer Part Number: 1924

Fits select 2015-2018 Ford Edge, Explorer, F-150, Focus RS, Fusion, Mustang and Lincoln Continental and MKX models (2.3L / 2.7L).

The BBK Power Plus Series 65mm throttle body is engineered as a high-performance, direct bolt-on replacement for the restrictive factory unit. By increasing the bore to 65mm, this throttle body provides up to 30% more airflow than the OE component, resulting in noticeable improvements in horsepower, torque, and throttle response. Each unit is CNC-machined from a premium 356 aluminum casting to ensure precise tolerances and long-term durability.

Designed for professional-grade reliability, BBK utilizes OEM-style die-stamped throttle linkages, double-sealed bearings, and O-ringed throttle shafts. This 50-state legal upgrade includes all-new electronics, simplifying the installation process and maintaining factory drivability while enhancing engine efficiency.

• Bore Size: 65mm for up to 30% increased airflow
• Construction: CNC-machined 356 aluminum casting
• Features: Double-sealed bearings and O-ringed throttle shafts
• Compliance: 50-State Legal (CARB Approved)
• Hardware: Includes all necessary new electronics
• Origin: Made in the USA
• Manufacturer Part Number: 1894