Fits 2022+ Toyota GR86 (ZN8) and Subaru BRZ (ZD8) models equipped with the 2.4L FA24 engine.

The HKS GTIII-RS Bolt-On Turbo Kit is a precision-engineered forced induction solution designed to significantly increase the power output of the second-generation GR86 and BRZ platform. At the core of this system is the GTIII-RS turbine, featuring a 0.6 A/R compressor housing optimized for the displacement and flow characteristics of the FA24 engine. This setup is specifically tuned to provide a broad torque curve and immediate throttle response, avoiding the excessive lag often associated with aftermarket turbo conversions.

• Turbocharger: HKS GTIII-RS turbine assembly
• Housing Spec: A/R 0.6 for balanced low-end response and high-end flow
• Fitment: Vehicle-specific design for ZN8 and ZD8 chassis
• Engine Compatibility: FA24 (2.4L Boxer)
• Installation: Bolt-on configuration utilizing factory-style mounting points where applicable
• Part Series: HKS GTIII-RS Turbo Series

The HKS GTIII-RS Sports Turbine Kit (11004-AN017) is a high-performance turbocharger upgrade designed specifically for the RB25 engine. By combining advanced aerodynamics with HKS-engineered housings and a modern center cartridge, this kit delivers a significant increase in power potential without sacrificing the low-end response required for street and circuit driving.

• Engineered as a high-efficiency replacement for the factory RB25 turbine assembly
• GTIII-RS series optimizes compressor and turbine wheel design for maximum flow
• Precision-machined housings ensure optimal thermal management and durability
• Includes necessary installation hardware and gaskets for a professional fit
• Manufacturer Part Number: 11004-AN017

Upgrade your RB26 powerplant with the HKS GTIII 2530 Sports Turbine Kit, a precision-engineered twin-turbo system designed for modern performance and throttle response. This kit utilizes high-efficiency center housing rotating assemblies (CHRA) and advanced compressor wheel aerodynamics to provide a significant increase in airflow capacity over factory units while maintaining a broad powerband.

• Manufacturer Part Number: 11004-AN014
• Modernized GTIII 2530 compressor and turbine wheel profiles
• Reinforced actuators for precise and stable boost control
• Direct bolt-on compatibility for RB26 engine platforms
• Complete kit includes gaskets, oil lines, and installation hardware

Fits 1989-2002 Nissan Skyline GT-R R32, R33, and R34 models equipped with the RB26DETT engine.

The HKS GTIII-SS Sports Turbine Kit (11004-AN011) is a precision-engineered twin-turbo upgrade designed for owners seeking a significant increase in power without sacrificing the legendary throttle response of the RB26 platform. Developed in collaboration with Mitsubishi Heavy Industries (MHI), these turbos utilize a high-efficiency CHRA and modern blade geometry to minimize lag while providing enough flow for high-output builds.

• Direct Bolt-On Fitment: Designed to mount to the factory exhaust manifolds and integrate with standard intake/exhaust plumbing for a clean installation.
• Advanced Turbine Design: Features optimized compressor and turbine wheels that improve spool-up characteristics over the original units.
• Reinforced Control: Includes upgraded HKS actuators to ensure stable boost pressure and prevent wastegate creep under high load.
• Comprehensive Kit: Packaged with essential gaskets, oil lines, and coolant lines required to replace the stock T25-style turbochargers.
• Manufacturer Part Number: 11004-AN011

Fits Toyota 86, Subaru BRZ, and Scion FR-S models equipped with the FA20 engine.

The HKS GTIII-RS Turbo Pro Kit is a comprehensive forced induction upgrade designed to deliver a significant increase in power and torque while maintaining the drivability of the FA20 engine platform. This kit features the HKS GTIII-RS turbocharger, which utilizes advanced impeller and housing aerodynamics to minimize lag and maximize efficiency. Designed as a bolt-on solution, this kit replaces the restrictive factory intake and exhaust components with high-flow hardware engineered for high-performance use.

• Features the HKS GTIII-RS turbocharger for superior response and power delivery
• Engineered specifically for the Toyota 86 / Subaru BRZ / Scion FR-S chassis
• Includes high-quality plumbing, gaskets, and mounting hardware for installation
• Optimized for the FA20 2.0L boxer engine
• Manufacturer Part Number: 11001-KT001

Fits 2015-2016 Ford F-250 and F-350 Super Duty (6.7L Diesel).

The Ford Racing Diesel Turbo Kit (M-TURBO-67) is a comprehensive performance upgrade for the 6.7L Power Stroke engine. Designed for a direct installation, this kit replaces the factory turbocharger and intake components with a complete assembly engineered for durability and efficient boost management. This kit is made in the USA and includes all critical supporting components, ensuring a clean install without the need for additional sourcing.

• Turbocharger Assembly: High-performance turbo replacement for 6.7L diesel applications.
• Engine Components: Includes lower intake manifold, EGR inlet tube, and exhaust outlet tubes.
• Heat Management: Comprehensive exhaust heat shields and intake shields provided to maintain optimal thermal efficiency.
• Installation Hardware: Comes with a dedicated turbo oil line, turbo outlet clamps, and all necessary fasteners, spacers, and studs.
• Complete Gasket Set: All required gaskets are included, featuring the essential EGR gaskets for a leak-free seal.
• Manufacturer Part Number: M-TURBO-67

Fits 2015-2021 Ford Mustang EcoBoost and EcoBoost Premium (2.3L).

Enhance the forced induction capabilities of your S550 with the Ford Performance High Performance Turbocharger. This engineered upgrade (MPN: M-9348-23T) provides increased airflow and efficiency over the factory unit, designed specifically for enthusiasts looking to maximize the output of their 2.3L EcoBoost engine. For optimal results, this turbocharger is designed to pair with Ford Performance M-6250-23EBH camshafts.

• Compressor Wheel: Increased from the factory 60mm to 63mm for greater induction volume.
• Turbine Wheel: 50mm wheel diameter for improved exhaust flow and response.
• Housing Design: Features an enlarged compressor housing volute to optimize airflow efficiency.
• Build Quality: Genuine Ford Performance part ensures factory-level fitment and reliability.
• Manufacturer Part Number: M-9348-23T

Fits select 2008-2010 Ford F-250 and F-350 Super Duty models (6.4L).

Restore the boost and reliability of your 6.4L PowerStroke engine with this remanufactured BD Diesel Twin Turbo Assembly. Designed as a direct-fit replacement for the factory high-pressure and low-pressure turbo units, this assembly is remanufactured to new factory standards to ensure it meets original equipment tolerances and performance specifications.

By replacing the entire twin turbo assembly, you address issues such as bearing wear, seized vanes, or oil seal failure that are common in high-mileage diesel applications. This unit is built to provide consistent power delivery and efficient spooling, maintaining the drivability and towing capacity of your Super Duty truck while ensuring compatibility with factory intake and exhaust connections.

• Manufacturer Part Number: 179514-B
• Condition: Remanufactured to new factory standards
• Engine Compatibility: Ford 6.4L PowerStroke Diesel
• Fitment Type: Direct OE-style replacement

Fits 2007-2012 Dodge Ram 2500 and 3500 (6.7L).

The BD Diesel 1407046 VGT Turbo Actuator Harness Adapter is a critical component for 2007.5-2012 6.7L Cummins owners upgrading or maintaining their turbocharging system. This harness enables the retrofit of newer style VGT actuators or complete turbocharger assemblies onto earlier trucks, providing a secure, direct-fit connection that maintains OEM performance standards. Engineered with high-quality connectors and wiring, it solves compatibility issues when updating from older actuator designs.

• Enables retrofitting of newer style VGT actuators or turbocharger assemblies
• Direct-fit replacement for 2007.5-2012 Cummins 6.7L applications
• Constructed from high-quality materials for maximum durability and heat resistance
• Maintains critical electrical signals for proper turbocharger vane positioning
• BD Diesel Part Number: 1407046

Fits select 2013-2016 Ford F-150, Explorer, Expedition, Taurus, Flex, and Transit models (3.5L).

The BD Diesel Screamer Turbo Kit delivers a performance boost to your 3.5L EcoBoost engine by replacing the factory turbocharger with a high-efficiency upgrade. Featuring a larger 40.5mm billet compressor wheel, this unit is engineered to support modifications up to 415HP while maintaining the convenience of a drop-in installation. It bolts directly to factory mounting points and uses existing hardware, requiring no custom tuning for operation.

Built for reliability and precision, every Screamer turbo is VSR high-speed balanced and arrives with a pre-calibrated wastegate. The kit includes the necessary gaskets and studs to ensure a leak-free seal upon installation, making it a comprehensive solution for restoring or enhancing your vehicle's forced induction system.

• 40.5mm billet compressor wheel for increased airflow
• Supports performance modifications up to 415HP
• Direct bolt-on replacement for factory turbocharger
• VSR high-speed balanced for long-term durability
• Wastegate factory-tested and calibrated
• Does not require aftermarket tuning
• Includes new installation gaskets and studs
• Manufacturer Part Number: 1047621

Fits 2011-2012 Ford F-150, Flex, and Taurus (3.5L).

The BD Diesel Screamer Turbo Kit (MPN 1047620) is a high-performance drop-in upgrade for the 3.5L EcoBoost engine. Designed to provide increased airflow and improved efficiency, this turbocharger features a larger 40.5 mm billet compressor wheel. It is engineered to support vehicle modifications up to 415HP while maintaining a bolt-on installation that uses factory mounting points and hardware.

Every Screamer turbocharger undergoes VSR high-speed balancing to ensure long-term reliability and smooth operation. The wastegate is factory-tested and calibrated for precise boost control. This kit is designed for straightforward integration and does not require aftermarket tuning for operation.

• 40.5 mm Billet Compressor wheel for increased flow
• Supports performance modifications up to 415HP
• Drop-in replacement for factory location
• VSR high-speed balanced for durability
• Factory-calibrated wastegate
• Includes new installation gaskets and studs
• No tuning required

Fits select 2013-2018 Ram 2500 and 3500 models (6.7L).

The BD Diesel Screamer Turbo and Exhaust Manifold Package (MPN 1045871) is a performance-driven, 50-state legal upgrade that replaces the stock assembly with high-efficiency components. This drop-in kit features the Screamer turbocharger paired with a pulse-flow manifold, designed to reduce backpressure and increase turbine flow while maintaining a factory-like appearance. With the right supporting modifications, this package can support power levels up to 690 HP.

The turbo utilizes a 64.5mm Ballistic Billet compressor wheel and a 70mm Low MOI QST turbine wheel. The QST wheel design offers a 15% reduction in moment of inertia (MOI) and 25% thinner blades, significantly improving spool response and gas flow. To ensure long-term durability, the manifold is cast from high-silicon ductile iron with precision slip joints that allow for thermal expansion without cracking or exhaust leaks.

• Fits 2013-2018 Ram 2500/3500 (6.7L Cummins)
• 64.5mm 7+7 blade Ballistic Billet compressor wheel
• 70mm 12-blade Low MOI QST turbine wheel
• High-silicon ductile iron pulse manifold with integral slip joints
• Pre-drilled and tapped for pyrometer probes
• VSR high-speed balanced and fully EGR compatible
• CARB EO No D-553-5; 50-state legal for street use
• Includes calibrated actuator tested for immediate installation

Fits 2007-2018 Dodge Ram and Ram 2500/3500 (6.7L Cummins).

The BD Diesel Screamer Turbo Kit is a high-performance drop-in upgrade for the 6.7L Cummins, designed to increase airflow and efficiency without requiring custom piping or manifold changes. It features a 64.5mm Ballistic Billet 7+7 blade compressor wheel paired with a low-inertia 70mm 12-blade QST turbine wheel. This combination provides a 15% reduction in moment of inertia (MOI) for significantly faster spool-up and better throttle response. Capable of supporting modifications up to 690HP, this turbo is VSR high-speed balanced and includes a brand-new, pre-calibrated Holset VGT actuator to ensure precise boost control.

• 64.5mm Ballistic Billet 7+7 blade compressor wheel
• 70mm QST 12-blade turbine wheel with 25% thinner blades for increased gas flow
• Supports performance modifications up to 690HP
• Includes brand new Holset VGT actuator, stroke-tested and calibrated before shipping
• Drop-in installation into stock location
• VSR high-speed balanced for maximum durability
• 50-state emissions legal
• 12-month manufacturer warranty
• Manufacturer Part Number: 1045770

Fits 2003-2007 Dodge Ram 2500 and 3500 models equipped with the 5.9L Cummins diesel engine.

The ATS Diesel Aurora 3000 Turbo Kit is engineered to provide a significant upgrade over the factory turbocharger, focusing on improved throttle response and reduced Exhaust Gas Temperatures (EGTs). This quick-spooling turbo is an ideal choice for daily driving and towing, offering a substantial increase in airflow while maintaining excellent low-end torque. Designed as a direct-fit performance replacement, the Aurora 3000 utilizes high-quality castings and precision-balanced components to ensure long-term reliability under heavy load.

• Faster spool-up compared to stock for improved drivability
• Reduces EGTs to protect engine components during heavy towing
• Increases overall airflow capacity for horsepower gains
• Includes necessary mounting hardware and gaskets for installation
• Manufacturer Part Number: 202-930-2272

Whether you are looking to replace a worn-out OE turbo or seeking more efficient power delivery for your 5.9L Cummins, the Aurora 3000 provides the balanced performance required for heavy-duty applications.

This Part Fits:

Fits 1994-1998 Dodge Ram 2500 and 3500 Base models.

The ATS Diesel Aurora 3000 Turbo Kit is engineered as a quick-spooling, performance-oriented upgrade for 1994-1998 Dodge Ram trucks. This turbocharger is designed to provide a significant increase in airflow and efficiency over the stock unit, effectively lowering exhaust gas temperatures (EGTs) while maintaining excellent throttle response. Whether the vehicle is used for daily commuting or heavy towing, the Aurora 3000 offers the reliability and power delivery needed for heavy-duty applications.

Designed for a clean installation, the Aurora 3000 utilizes high-quality components and precise tolerances to ensure long-term durability. By improving the engine's ability to breathe, this kit enhances overall drivability and efficiency without the lag often associated with larger turbochargers.

• Manufacturer Part Number: 202-930-2164
• Product Line: Aurora 3000
• Direct-fit performance upgrade for 1994-1998 Dodge Ram models
• Engineered to lower EGTs and improve airflow efficiency
• Optimized spool-up for daily driving and towing performance
• Complete kit designed for straightforward installation

Fits 2011-2016 Ford Cab & Chassis models equipped with the 6.7L Power Stroke diesel engine.

The ATS Diesel Aurora 4000 VNT Stage 2 Turbocharger Kit is a performance-oriented upgrade designed to improve the airflow efficiency and power delivery of the 6.7L Power Stroke. Utilizing a Variable Nozzle Turbine (VNT) design, this turbocharger optimizes exhaust gas flow across the entire powerband, ensuring rapid spool-up at low RPMs while maintaining high-volume air delivery at the top end. This makes it an ideal solution for heavy-duty towing and high-demand applications where throttle response and EGT management are critical.

• Direct upgrade for 2011-2016 Ford Cab & Chassis 6.7L Power Stroke engines.
• Aurora 4000 VNT Stage 2 configuration for improved airflow over stock.
• Variable Nozzle Turbine technology optimizes boost pressure and reduces turbo lag.
• Engineered to lower Exhaust Gas Temperatures (EGTs) under heavy load.
• Manufacturer Part Number: 202-407-3368

Fits 2011-2014 Ford F-Series pickups equipped with the 6.7L Power Stroke diesel engine.

The ATS Diesel Aurora 4000 VNT Stage 2 Turbocharger Kit provides a significant performance and reliability upgrade for early 6.7L Power Stroke engines. Utilizing Variable Nozzle Turbine (VNT) technology, this Stage 2 kit is engineered to deliver a broad powerband with the quick spooling characteristics required for heavy towing and daily driving, while overcoming the airflow limitations of the factory 2011-2014 turbocharger.

This kit replaces the original restrictive turbo assembly with a more robust design capable of handling higher boost pressures and reducing exhaust gas temperatures (EGTs). The Aurora 4000 VNT system maintains integrated electronic control to ensure seamless integration with the factory PCM and exhaust brake functionality.

• Series: Aurora 4000 VNT Stage 2
• Turbo Type: Variable Nozzle Turbine (VNT)
• Fitment: Direct bolt-on for 2011-2014 Ford 6.7L
• Optimized for improved throttle response and increased airflow
• Manufacturer Part Number: 202-406-3368

Fits select 2013-2018 Dodge Ram 2500 and 3500 trucks (6.7L Cummins).

The ATS Diesel Aurora 4000 Stage 2 Upgraded Turbo System is engineered to provide a significant performance increase over the factory VGT setup. By optimizing airflow and reducing exhaust gas temperatures (EGTs), this system enhances the efficiency and power delivery of the 6.7L Cummins engine. As a Stage 2 upgrade, the Aurora 4000 is designed for truck owners who demand superior throttle response and increased cooling capacity during heavy towing or spirited street driving.

• Optimized Efficiency: High-efficiency compressor and turbine wheel geometry reduces backpressure and improves boost response.
• Thermal Management: Designed to lower EGTs to preserve engine longevity under heavy loads.
• Durable Construction: Built to withstand high-stress diesel applications while maintaining daily driveability.
• Complete System: Includes the necessary components for a clean installation on the 6.7L platform.
• MPN: 202-402-2392

Fits 2019+ RAM trucks equipped with the 6.7L Cummins diesel engine.

The ATS Diesel Stage 1 Aurora 3000 Turbocharger is engineered as a direct-fit performance upgrade for the 2019 and newer RAM 6.7L Cummins. By replacing the restrictive factory turbocharger, the Aurora 3000 improves overall airflow and helps maintain lower exhaust gas temperatures (EGTs) during heavy towing or high-performance driving. This turbo is designed to provide better throttle response and increased reliability without the need for complex modifications, as it bolts directly to the factory mounting points.

• Manufacturer Part Number: 202-302-2464
• Series: Aurora 3000 (Stage 1)
• Application: 2019+ RAM 6.7L Cummins Diesel
• Design: Direct-fit bolt-on replacement for factory turbo
• Engineered for improved airflow and reduced EGTs