The Forced Performance FP7275 Street Turbocharger is engineered for high-performance applications that demand a balance of rapid spool-up and significant top-end power. Featuring the proven 7275 rotating assembly, this turbocharger is designed to move massive air volumes while maintaining the durability required for street and track use.

This unit is equipped with a premium 1.02 A/R stainless steel turbine housing. The investment-cast stainless steel construction offers superior heat retention and corrosion resistance compared to traditional iron housings, while the V-band inlet and outlet flanges provide a secure, leak-free seal and simplify clocking and installation. Whether you are building a high-horsepower street car or a dedicated track machine, the FP7275 provides the efficiency and flow characteristics needed to reach your power goals.

• Series: FP7275 Street
• Turbine Housing: 1.02 A/R Stainless Steel
• Connection Type: V-Band Inlet/Outlet
• Manufacturer Part Number: 2757275VBAND

The Forced Performance FP6875 Street Turbocharger is a high-performance unit engineered for enthusiasts looking to maximize top-end power without compromising the durability required for street use. Featuring an advanced compressor and turbine wheel combination, the FP6875 is designed to handle high boost levels while maintaining efficient airflow across the RPM range.

This specific configuration utilizes a cast stainless steel turbine housing with a 1.02 A/R, offering superior heat management and corrosion resistance compared to traditional iron housings. The V-band inlet and outlet design ensures a secure, leak-free seal and simplifies the installation and clocking process for custom manifold setups. By reducing backpressure, the 1.02 A/R housing allows the engine to breathe more freely at high peak power levels.

• Manufacturer Part Number: 2756875VBAND
• Turbo Series: FP6875 Street
• Turbine Housing Material: Stainless Steel (SS)
• Turbine Housing A/R: 1.02
• Connection Type: V-Band Inlet/Outlet
• Application: High-performance street and track use

The Forced Performance Green UHF Turbocharger is a high-performance upgrade for the Subaru WRX and STI platforms, designed to balance rapid spool with significant top-end power. This unit features the Ultra High Flow (UHF) turbine wheel technology, which optimizes exhaust gas efficiency through the cast 8cm² (CH8CM) turbine housing.

Built for precision boost management, this FP Green turbo includes a TiAL MVI internal wastegate actuator calibrated to 18PSI. The 60mm compressor wheel provides the airflow necessary for high-horsepower builds while maintaining streetable response. This package comes complete with the required oil supply line for a direct-fit installation on factory-style flanged setups.

• Manufacturer Part Number: 2029101
• Compressor Wheel: 60mm
• Turbine Housing: 8cm² (CH8CM)
• Wastegate Actuator: TiAL MVI Internal (18PSI)
• Turbine Technology: FP UHF (Ultra High Flow)
• Included Hardware: Dedicated oil supply line kit

Designed for the Subaru WRX and STI, the Forced Performance Blue UHF turbocharger is engineered to deliver a significant increase in airflow while maintaining excellent transient response. This unit features a 58mm compressor wheel paired with the Ultra High Flow (UHF) turbine technology to maximize power potential without the lag typical of larger framed turbos.

• 58mm compressor wheel for increased mass airflow
• Ported CH7CM turbine housing to optimize exhaust flow and boost control
• Internal Wastegate (IWG) design for a direct bolt-on installation
• Includes specialized stainless steel oil line for reliable lubrication
• Specifically configured for Subaru WRX/STI turbo locations
• Manufacturer Part Number: 2029050

The ported turbine housing is a critical feature, helping to prevent boost creep and ensuring stable performance across the RPM range. This complete package includes the necessary oil line, making it a comprehensive solution for enthusiasts upgrading their factory forced induction system.

Fits 2015-Up Subaru WRX (FA20).

The Forced Performance Blue LOPE turbocharger is an engineered performance upgrade for the FA20-powered Subaru WRX platform. This unit utilizes a dual ball-bearing (BB) center cartridge to provide faster spool-up and superior transient response compared to standard journal bearing options. The LOPE (Low Pressure Exhaust) housing design is optimized to minimize backpressure, allowing for more efficient exhaust flow and consistent power delivery throughout the RPM range.

Equipped with an internal wastegate and a factory-calibrated 14psi actuator, this turbocharger offers a direct-fit solution for drivers looking to increase the headroom of their forced induction system. It is built to maintain the reliability of your drivetrain while significantly enhancing airflow capacity.

• Manufacturer Part Number: 2025285
• Series: Blue Turbo LOPE
• Bearing Type: Dual Ball Bearing (BB)
• Housing Design: Low Pressure Exhaust (LOPE)
• Wastegate: Internal Wastegate
• Actuator: 14psi Factory-style Actuator
• Engine Compatibility: Subaru FA20

Fits 2015-2023 Subaru WRX models equipped with the FA20 engine.

The Forced Performance Blue Turbo is a purpose-built performance upgrade designed to increase the airflow potential of the FA20 platform. This turbocharger features a 58mm compressor and a precision-cast CH10CM turbine housing, delivering an optimized balance of top-end power and transient response. This configuration is equipped with a TiAL MVI internal wastegate for superior boost control and includes the necessary oil line for a complete installation.

• Manufacturer Part Number: 2025220
• Compressor Wheel: 58mm
• Turbine Housing: CH10CM
• Wastegate: TiAL MVI Internal Wastegate
• Fitment: 2015-2023 Subaru WRX (FA20)
• Included: Turbocharger and oil feed line

Fits select Subaru WRX and STI models. The Forced Performance FP Blue Turbocharger is a premier mid-range upgrade designed to provide a significant increase in airflow while maintaining responsive spool characteristics. This configuration features a 58mm compressor inducer and a high-flow 10cm² turbine housing, specifically optimized for performance builds utilizing an external wastegate setup.

Built for durability and high-duty cycles, the FP Blue utilizes a robust CHRA designed to handle increased boost pressures. The included stainless steel oil line ensures reliable lubrication and proper oil flow to the journal bearings, making it a comprehensive solution for EJ-series engine builds seeking more power without sacrificing driveability.

• Manufacturer Part Number: 2025202
• Compressor Inducer: 58mm
• Turbine Housing: 10cm²
• Wastegate Configuration: External Wastegate (EWG)
• Compatibility: Subaru EJ-series WRX and STI
• Includes: High-pressure oil supply line and required hardware

The Forced Performance Black Turbocharger is a premier stock-location upgrade for Subaru WRX and STI enthusiasts seeking high-horsepower output without moving to a rotated turbo setup. This unit features a high-flow 84mm compressor housing (CH) and a 10cm² turbine housing, optimized for top-end performance and increased exhaust flow. This configuration is specifically built for use with an external wastegate (EWG) to ensure stable and precise boost control at high pressure levels.

• Manufacturer Part Number: 2025164
• Compressor Housing: 84mm Flow Advancement Port
• Turbine Housing: 10cm²
• Wastegate Configuration: External Wastegate (EWG)
• Included Components: Specialized oil line kit for installation
• Fitment: Designed for Subaru WRX and STI models

The 84mm inlet requires a matching intake to accommodate the increased airflow capacity of the Black series wheel. By utilizing a 10cm² turbine housing, this turbocharger reduces backpressure, allowing for higher peak power figures compared to smaller-housed alternatives.

The Forced Performance Black Turbocharger is a high-output bolt-on upgrade engineered specifically for Subaru WRX and STi platforms. Designed for enthusiasts seeking maximum power within the factory location, this unit features a high-flow 84mm compressor inlet and a 10cm² turbine housing to optimize exhaust gas flow and reduce backpressure at high RPM.

• Manufacturer: Forced Performance
• Series: Black
• Part Number: 2025160
• Compressor Inlet: 84mm
• Turbine Housing: 10cm² (CH10CM)
• Wastegate Configuration: Internal Wastegate
• Included Hardware: High-pressure oil feed line kit

This turbocharger delivers significant airflow improvements over stock units, making it an ideal choice for built EJ-series engines. The internal wastegate design simplifies installation while maintaining precise boost control. Note that this 84mm inlet version requires specific intake pipe sizing and custom tuning to manage the increased volume and fueling requirements.

Fits select Subaru WRX and STi models. The Forced Performance Green Turbocharger is engineered as a high-performance upgrade for the Subaru EJ-series platform, delivering a significant increase in airflow over the factory unit without compromising mid-range response. This turbo utilizes a 60mm compressor wheel paired with an 8cm² (CH8CM) turbine housing to optimize exhaust flow and reduce backpressure.

Designed for reliability and straightforward installation, this unit includes a specific oil line and features a built-in internal wastegate (IWG) for precise boost control. Whether you are refreshing a worn unit or building for higher power targets, the FP Green provides the durability and flow characteristics required for spirited driving and track applications.

• Manufacturer Part Number: 2025090
• Compressor Wheel: 60mm
• Turbine Housing: 8cm² (CH8CM)
• Wastegate Configuration: Internal Wastegate (IWG)
• Included Components: Replacement oil line
• Fitment: Subaru WRX / STi bolt-on style

The Forced Performance FP Blue turbocharger is a performance-engineered, bolt-on upgrade for Subaru WRX and STi models. Designed to provide a balance between rapid spool and substantial top-end flow, this turbocharger features a 58mm compressor wheel and a CH8 CM turbine housing for optimized exhaust gas management. This unit is configured with an internal wastegate and includes the necessary oil line for a reliable installation and proper lubrication.

• Manufacturer Part Number: 2025050
• Compressor Wheel: 58mm
• Turbine Housing: CH8 CM
• Wastegate: Internal
• Included: Oil feed line kit
• Application: Subaru WRX/STi

Designed as a high-performance bolt-on upgrade for the Subaru WRX and STi, the Forced Performance Blue LOPE turbocharger delivers a perfect balance of rapid spool and top-end flow. This unit utilizes a dual ball bearing (BB) center section for superior transient response and durability under high boost compared to standard journal bearing turbos.

Featuring a 58mm compressor wheel and an 8cm (CH8) CM turbine housing, this turbo is engineered to maximize exhaust energy while maintaining an internal wastegate configuration for a cleaner, more straightforward installation. The LOPE series profile ensures optimized airflow for street and track applications. This kit includes the necessary oil line to ensure proper lubrication and cooling of the ball bearing assembly from day one.

• Manufacturer Part Number: 2024000
• Compressor Wheel: 58mm
• Turbine Housing: 8cm (CH8) CM
• Bearing Type: Dual Ball Bearing
• Wastegate: Internal
• Series: Blue LOPE
• Includes: High-pressure oil line

Fits select 2004-2010 Chevrolet Silverado and GMC Sierra 2500 HD/3500 (6.6L LLY/LBZ/LMM Duramax).

The Fleece Performance Street VNT Cheetah Turbocharger is a high-performance, drop-in replacement designed for the 2004-2010 Duramax diesel platform. Utilizing 100% stock-appearing housings, this turbo maintains factory mounting points and system compatibility while significantly increasing airflow and power potential. It features a 63mm Forged Milled Wheel (FMW) compressor and a 66mm high-flow turbine wheel, delivering the responsive spool-up of a smaller unit with the high-end flow required for up to 625 RWHP.

• Performance: Rated at 625 RWHP and capable of safely sustaining 40-45 PSI of boost.
• FMW Technology: Forged Milled Wheels offer superior strength over standard billet, resulting in faster spool-up and a broader torque curve.
• Premium Internals: Built with genuine Garrett components, featuring upgraded shaft bearings and a 360-degree thrust bearing for maximum durability.
• VNT Control: Variable Nozzle Technology maintains stock-like throttle response for daily driving and towing without sacrificing top-end power.
• Compatibility: Features an HX40 outlet for improved exhaust flow.

Whether for daily towing or weekend competition, the Street VNT Cheetah provides the ultimate balance of reliability and performance. MPN: FPE-VNT63-STREET.

Fits select 2003-2018 Dodge Ram and Ram 2500/3500 trucks.

The Fleece Performance S400 Turbo Compressor Discharge Adapter Kit provides a heavy-duty solution for adapting your S400 series turbocharger to a standard 3-inch charge air cooler (intercooler) hose. Engineered for durability and high-boost reliability, this 90-degree adapter is cast from high-grade aluminum to ensure a leak-free transition from the turbocharger compressor cover.

The kit includes everything necessary for a professional installation, featuring an S400-specific v-band clamp and a high-temp O-ring for a precision seal. This adapter is a critical component for enthusiasts installing an S400 frame turbo who need a reliable, space-efficient 90-degree turn to route charge piping to the intercooler.

• Manufacturer Part Number: FPE-S4TCDA-KIT
• Material: Cast Aluminum
• Outlet Size: 3" OD
• Design: 90-degree bend
• Compatibility: S400 series turbochargers
• Kit Includes: 90-degree cast aluminum discharge adapter, S400 v-band compressor outlet clamp, and high-temp O-ring

Fits 2015-2019 Ford F-250 and F-350 Super Duty models (6.7L Powerstroke).

The Fleece Performance 63mm FMW Cheetah Turbocharger is a high-performance drop-in replacement designed to enhance airflow without sacrificing daily drivability. This turbo features an exclusive 63mm Forged Milled Wheel (FMW) compressor and a high-flow turbine wheel, providing a combination of quick throttle response and significant top-end power. Engineered to support up to 650 rear-wheel horsepower (RWHP), it is an ideal solution for towing, racing, or street use.

• Manufacturer Part Number: FPE-PS-FMW-63-1518
• Compressor Wheel: 63mm FMW technology
• Max Power Rating: 650 RWHP
• Design: Direct drop-in replacement for factory 2015-2019 turbos
• Turbine: High-flow turbine wheel for reduced backpressure
• Core Policy: A 2015-2019 Powerstroke core must be returned for refund eligibility

Fits 2011-2016 Chevrolet Silverado and GMC Sierra 2500 HD and 3500 HD (6.6L LML Duramax).

The Fleece Performance 63mm FMW Cheetah Turbocharger is a high-performance drop-in replacement designed for the LML Duramax diesel. Engineered with a proprietary 63mm Forged Milled Wheel (FMW) compressor and a high-flow Cheetah turbine wheel, this turbo delivers the quick spool-up characteristics of a smaller unit while providing the top-end flow necessary for high-output applications. Rated for 650 RWHP, it is the ideal choice for dual-purpose trucks used for both heavy towing and competitive sled pulling.

This turbocharger maintains a 100% stock-appearing exterior by utilizing modified factory housings with upgraded internals. Built on genuine Garrett Turbocharger components, it features a heavy-duty 360-degree thrust bearing and upgraded shaft bearings for maximum durability under high boost loads. The Variable Nozzle Technology (VNT) is retained to ensure responsive throttle behavior across the entire RPM range.

• Manufacturer Part Number: FPE-LML-VNT-63-FMW-N
• Power Rating: Up to 650 RWHP
• Boost Capacity: Rated for 40-45 PSI
• Wheel Technology: Forged Milled Wheel (FMW) for increased strength and faster spool
• Internals: Genuine Garrett components with 360-degree thrust bearings
• Compliance: 2.5-inch Work Stock legal
• Requirements: Aftermarket tuning and high-flow exhaust are required for installation

Fits 2001-2004 Chevrolet Silverado and GMC Sierra 2500 HD/3500 (6.6L Duramax LB7).

Improve your truck's responsiveness and power with the Fleece Performance LB7 Cheetah Turbocharger. This 100% drop-in replacement is designed for Federal Emissions equipped vehicles, providing a significant performance upgrade without the need for complex modifications. Engineered with a custom 63mm billet compressor wheel and a high-flow Inconel turbine wheel, this turbocharger is capable of supporting up to 625 rear-wheel horsepower (RWHP) while maintaining excellent street drivability.

The kit includes a high-flow LB7 intake horn and a complete installation kit to ensure a seamless setup. With no core charge required, it is one of the most straightforward ways to refresh and upgrade your LB7’s forced induction system.

• 63mm custom billet compressor wheel for increased airflow
• High-flow Inconel turbine wheel for improved exhaust flow
• Supports up to 625 RWHP
• 100% drop-in replacement for factory units
• Includes LB7 high-flow intake horn and installation hardware
• No core charge required
• Designed for Federal Emissions vehicles ONLY (not for CA-delivered vehicles)
• Manufacturer Part Number: FPE-LB7-63

Fits select 2017-2023 Chevrolet Silverado and GMC Sierra 2500 HD/3500 HD (6.6L).

The Fleece Performance Cheetah turbocharger defines the industry standard for L5P Duramax power and reliability. Designed as a stock-appearing, drop-in replacement, this 63mm turbocharger utilizes an exclusive compressor wheel and Inconel turbine wheel technology. This setup delivers improved throttle response, increased top-end power, and the signature Cheetah sound while maintaining all factory functions, including the exhaust brake.

• Supports up to 650 RWHP
• Brand new unit with no core charge or core return required
• Features 63mm compressor wheel and high-temp Inconel turbine wheel
• CARB Executive Order (EO) #D-834-19
• Replaces OEM part numbers 12723305 (2017-2019) and 12723083 (2020-2023)
• 1-year limited warranty

Technical Note: This turbocharger is sold without an actuator and requires the reuse of the original vehicle actuator or a new replacement. For 2017-2019 L5P models, use actuator 12723306, 12683993, or 12683982. For 2020-2023 L5P models, use actuator 12723081 or 12707578.

Installation Hardware Included: EGR tube gasket to intake bridge, EGR coolant pipe gasket, PCV to compressor cover gasket, three coolant/oil feed and return gaskets, turbine housing to catalyst gasket, two oil drain gaskets, and a pedestal gasket.

Fits 1994-2002 Dodge Ram 2500 and 3500 (Base models).

The Fleece Performance Cheetah Series HX35 turbocharger is a stock-appearing, drop-in replacement designed for owners who demand increased reliability and power without the complexity of an aftermarket install kit. This unit bolts directly to the factory mounting points, providing a seamless upgrade for your Cummins-powered Dodge Ram.

Equipped with an exclusive 63mm Forged Milled Wheel (FMW) compressor and high-strength Inconel turbine wheel technology, this turbocharger delivers exceptionally smooth throttle response and substantial top-end performance. Whether you are replacing a worn OE unit or building for more power, the Cheetah series provides the airflow necessary to support significant modifications.

• Manufacturer Part Number: FPE-HX35-63-FMW
• Compressor Wheel: 63mm FMW (Forged Milled Wheel)
• Turbine Wheel: Inconel technology for heat resistance and durability
• Power Support: Capable of supporting modifications up to 650 RWHP
• Installation: Direct bolt-on, drop-in replacement for factory HX35
• Design: Stock-appearing for a clean engine bay aesthetic

Fits 2019-2022 Ram 2500 and 3500 (6.7L 24V Cummins).

The Fleece Performance Cheetah series sets the standard for drop-in turbocharger performance. Engineered as a stock-appearing replacement, this unit provides a significant increase in power and reliability without the need for expensive installation kits. It features an exclusive 63mm Forged Milled Wheel (FMW) compressor and high-strength Inconel turbine technology, delivering crisp throttle response and increased top-end flow while maintaining the iconic Cheetah sound.

This turbocharger comes ready to install with a brand-new actuator that requires no calibration or specialized programming. It fully maintains all factory functionality, including the exhaust brake and cold-weather warm-up features, making it an ideal choice for daily drivers and heavy-duty towing. This unit is 50-state emissions legal under CARB EO# D-834-2.

• Fleece Performance Exclusive 63mm FMW Compressor Wheel
• High-temperature Inconel turbine wheel technology
• Retains OEM factory exhaust brake and warm-up functions
• Drop-in replacement: no actuator calibration or programming required
• 2-year Limited Warranty
• CARB Executive Order: EO# D-834-2
• Manufacturer Part Number: FPE-351-1920

Includes: Exhaust flange gasket, exhaust flange studs and nuts, turbo oil drain gasket, and coolant banjo sealing washers. Note: Speed sensor is not included. Core return paperwork and instructions are included in the box.

Fits 2013-2018 Ram 2500 and 3500 models equipped with the 6.7L Cummins diesel engine.

The Fleece Performance Cheetah Turbocharger is engineered as a stock-appearing, drop-in replacement that significantly expands your engine's power band. This 63mm VGT unit utilizes Fleece’s exclusive Forged Milled Wheel (FMW) compressor technology and a high-strength Inconel turbine wheel to deliver lightning-fast throttle response and massive top-end power without requiring an aftermarket installation kit.

Designed for reliability and ease of use, this turbocharger includes a brand-new VGT actuator that requires no calibration or special programming. It maintains all original factory functions, including the exhaust brake and engine warm-up features, making it the ideal upgrade for trucks that work as hard as they play. It is capable of supporting modifications up to 700 RWHP while remaining emissions compliant with CARB EO# D-834.

• Manufacturer Part Number: FPE-351-1317
• Compressor Wheel: 63mm Forged Milled Wheel (FMW)
• Turbine Material: High-flow Inconel wheel
• Power Support: Capable of up to 700 RWHP
• VGT Actuator: New actuator included; no programming required
• Emissions Status: CARB EO# D-834
• Warranty: 2-Year Limited Warranty

Fits 2007-2012 Dodge and Ram 2500 and 3500 models equipped with the 6.7L Cummins engine.

The Fleece Performance Cheetah Series 63mm Billet Holset VGT Turbocharger is a high-performance, drop-in replacement designed to increase power potential while maintaining a stock-appearing engine bay. Built with an exclusive Forged Milled Wheel (FMW) compressor and high-strength Inconel turbine wheel technology, this turbocharger delivers rapid throttle response and significant top-end flow, capable of supporting vehicle modifications up to 700 RWHP.

This VGT (Variable Geometry Turbocharger) comes equipped with a brand-new actuator that requires no calibration or programming during installation. It is designed to integrate seamlessly with factory systems, retaining full functionality of the OEM exhaust brake and engine warm-up features. As a true bolt-on upgrade, it eliminates the need for expensive aftermarket installation kits or complex plumbing modifications.

• Manufacturer Part Number: FPE-351-0712
• Compressor Wheel: 63mm Fleece Performance Exclusive FMW Technology
• Turbine Wheel: Inconel construction for high-temperature durability
• Performance: Supports up to 700 RWHP
• Installation: Direct bolt-on replacement; stock appearing
• Controls: Pre-installed new actuator; maintains factory exhaust brake functions
• Warranty: 2-Year Limited Warranty

Fits 2004-2007 Dodge Ram 2500 and 3500 trucks (5.9L Cummins).

The Fleece Performance Cheetah series turbocharger is a high-performance, drop-in replacement designed to provide significant power gains while maintaining a stock appearance. This Holset-based unit features an exclusive 63mm Forged Milled Wheel (FMW) compressor and Inconel turbine wheel technology, delivering improved throttle response and substantial top-end power without the need for expensive aftermarket install kits. It bolts directly to factory mounting points and is capable of supporting modifications up to 650 RWHP.

• Exclusive FMW compressor wheel technology for increased airflow
• Inconel turbine wheel for high-temperature durability
• Internal wastegate preset to 40 psi
• Direct bolt-on fitment with stock appearance
• No core charge required
• Manufacturer Part Number: FPE-351-0407

Application Note: To confirm proper fitment, verify that the tenth digit of your VIN is a 3 or 4. If the tenth digit is a 5 or higher, this turbo (FPE-351-0407) is the correct application for your 5.9L Cummins engine.

Fits 2003-2004 Dodge Ram 2500 and 3500 models equipped with the 5.9L Cummins diesel engine.

The Fleece Performance Cheetah series sets the standard for drop-in replacement turbochargers, offering a significant performance increase while maintaining a factory-like appearance. This 63mm turbocharger bolts directly to the factory mounting points and does not require an expensive aftermarket installation kit. It features an exclusive Forged Milled Wheel (FMW) compressor and high-strength Inconel turbine wheel technology, delivering improved throttle response and substantial top-end power reaching up to 650 RWHP.

Built for reliability and performance, the wastegate is preset to 40 psi to handle increased boost levels. Before ordering, verify that the tenth digit of your vehicle's VIN is a 3 or 4 to ensure compatibility with this specific unit.

• Manufacturer Part Number: FPE-351-0304
• 63mm Fleece Performance exclusive FMW compressor wheel
• Inconel turbine wheel for high-temperature durability
• Supports modifications up to 650 RWHP
• Internal wastegate preset to 40 psi
• Stock-appearing, drop-in replacement design
• No core charge required

Fits select Mini Cooper S models equipped with the EP6 HP engine. This genuine BorgWarner SX K03 turbocharger is an OE-quality replacement designed to restore factory performance and reliability to your vehicle's forced induction system.

Built by the original manufacturer, this unit provides the exact functionality and performance specifications of the factory-installed equipment. It features a robust, water-cooled bearing housing for superior thermal management and durability under high-stress conditions. This aftermarket service turbo is an essential component for maintaining the boost characteristics and efficiency of the EP6 HP powerplant.

• Turbo Model: K03
• Manufacturer Part Number: 53039880163
• Direct replacement for K03-0118 units only
• Water-cooled bearing housing for improved heat dissipation
• OE-quality materials and manufacturing tolerances

Note: Proper installation requires a turbine housing outlet gasket (BMW/Mini Part No. 7 589 503).

The BorgWarner EFR 8374 (MPN 179393) is a high-performance turbocharger engineered for professional racing and street use, delivering a balance of rapid boost response and high-end flow. Built on the B2 frame, this unit features a 1.05 A/R twin-scroll turbine housing, ideal for divided exhaust manifolds to maximize pulse energy and minimize lag in 500-800 horsepower applications.

• Gamma-Ti Turbine Wheel: Titanium Aluminide construction significantly reduces rotational inertia for near-instant response.
• Dual Ceramic Ball Bearings: Provides low friction and high durability under extreme thermal loads.
• Forged Milled Wheel (FMW): The compressor wheel is machined from high-strength forged aluminum for increased pressure ratio capability.
• 1.05 A/R Turbine Housing: Stainless steel construction with a Twin Scroll T4 inlet and V-band turbine flange (VTF) outlet.
• Integrated Oil Control: Includes a built-in oil orifice to ensure proper lubrication without the need for external restrictors.

This SuperCore configuration includes the compressor and turbine assembly with the 1.05 A/R stainless steel housing. It is designed for external wastegate setups.

The BorgWarner EFR 7670 (MPN 179390) is an EFR Series B2 turbocharger engineered for high-response performance applications ranging from 400 to 600 horsepower. Built with a Gamma-Ti (Titanium Aluminide) turbine wheel and dual ceramic ball bearings, this unit provides exceptionally low rotational inertia for lightning-fast spool-up and immediate transient response.

This configuration features a 0.92 A/R twin-scroll (VTF) stainless steel turbine housing designed for superior heat retention and maximum pulse energy efficiency. The integrated internal wastegate, compressor recirculation valve (CRV), and boost control solenoid simplify your engine bay layout by eliminating the need for bulky external plumbing and components.

• Manufacturer Part Number: 179390
• Compressor Wheel Inducer: 57.2mm
• Compressor Wheel Exducer: 70mm
• Turbine Wheel Outer Diameter: 70mm
• Turbine Housing: 0.92 A/R Twin Scroll
• Wastegate Type: Internal
• Bearing Type: Dual Ceramic Ball Bearing
• Turbine Wheel Material: Gamma-Ti
• Housing Material: Investment Cast Stainless Steel

The BorgWarner EFR 6758 B1 Series turbocharger is engineered for high-performance applications where rapid response and durability are paramount. As part of the Engineered For Racing (EFR) line, this unit features a Gamma-Ti turbine wheel for low rotational inertia and a dual ceramic ball bearing cartridge for exceptional spool-up and reliability under high heat and heavy load.

• Manufacturer Part Number: 179388
• Turbine Housing: 0.64 A/R Stainless Steel with V-Band Outlet (VO)
• Wastegate: Integrated Internal Wastegate (WG)
• Turbine Wheel: Gamma-Ti (Titanium Aluminide) for reduced rotational inertia
• Bearing System: Dual Ceramic Ball Bearing for increased efficiency
• Compressor: Forged Milled Wheel (FMW) technology
• Integrated Features: Built-in Compressor Recirculation Valve (CRV) and boost control solenoid

The BorgWarner EFR 8374 B2 Turbocharger is engineered for high-performance racing and street applications that demand a balance of rapid boost response and high-end power. This B2 frame unit features a high-flow 8374 compressor wheel and a lightweight Gamma-Ti (Titanium Aluminide) turbine wheel designed to significantly reduce rotational inertia compared to traditional alloys.

This specific configuration includes a 0.92 A/R stainless steel turbine housing with a V-band Twin Flow (VTF) twin-scroll design, optimizing exhaust gas pulse energy for faster spooling. It comes equipped with an integrated internal wastegate (WG) and a compressor-mounted Boost Control Solenoid Valve (BCSV) to simplify plumbing and installation while maintaining precise control.

• Manufacturer Part Number: 179357
• Series: EFR (Engineered For Racing)
• Frame Size: B2
• Turbine Housing: 0.92 A/R VTF (Twin Scroll)
• Turbine Wheel Material: Gamma-Ti
• Wastegate Type: Internal (WG)
• Integrated Compressor Recirculation Valve (CRV)
• Dual ceramic ball bearing cartridge

The BorgWarner EFR 6258 B1 (MPN 179150) is a high-response turbocharger from the Engineered For Racing series, designed for enthusiasts and racers seeking a compact footprint without sacrificing performance. This B1 frame turbo features a 62mm compressor wheel and a 58mm turbine wheel, delivering an ideal balance for small-displacement engines or twin-turbo applications requiring rapid transient response.

Built for durability and thermal efficiency, the 179150 features a stainless steel turbine housing with a 0.64 A/R and a V-band outlet for secure, leak-free exhaust plumbing. The internal wastegate design streamlines the installation by eliminating the need for external plumbing and gates. Inside, the Gamma-Ti turbine wheel significantly reduces rotational inertia, while dual ceramic ball bearings ensure low-friction operation and instant spool-up.

• Manufacturer Part Number: 179150
• Series: EFR (Engineered For Racing)
• Frame Size: B1
• Turbine Housing: 0.64 A/R with V-Band Outlet
• Wastegate: Integrated Internal Wastegate (WG)
• Turbine Wheel: Gamma-Ti (Titanium Aluminide) for low inertia
• Bearing Type: Dual Ceramic Ball Bearing
• Compressor Wheel: Forged Milled Wheel (FMW)
• Integrated Features: Compressor Recirculation Valve (CRV) and Boost Control Solenoid