Fits select 2014-2020 BMW and Mini models, including 3 Series, 5 Series, 7 Series, X1 through X5, Cooper, Clubman, and Countryman. These H&R Trak+ 30mm DRA Series wheel adaptors are engineered to widen the vehicle track for a flush fender fitment and improved lateral stability. Unlike standard spacers, the DRA series bolts directly to the vehicle hub with provided hardware, while the wheel is then secured to the adaptor using the existing lug bolts.

Manufactured in Germany from a proprietary lightweight aluminum/magnesium alloy, these adaptors provide a higher tensile strength than standard 6061-T6 billet aluminum. The hubcentric design features a full-contact hub to ensure even load distribution and precise wheel centering, eliminating vibration and maintaining factory-level ride quality.

• Thickness: 30mm
• Bolt Pattern: 5/112
• Center Bore: 66.5mm
• Thread Pitch: 14x1.25
• Finish: Black Anodized
• Series: Trak+ DRA Series
• Manufacturer Part Number: 6055664SW
• Construction: High-tensile proprietary alloy, hubcentric

Fits select 1990-2020 Audi, Volkswagen, and Bentley models (2.0T).

H&R Trak+ Wheel Spacers move your wheels outward to sit flush with the fender, correcting vehicle stance and widening the track for improved lateral stability. Unlike standard spacers that require extra-long bolts, the 30mm DRA Series bolts directly to the hub using the supplied specialized hardware. Your original factory wheel bolts are then used to thread into the spacer's reinforced holes, ensuring a secure fitment that maintains factory-level load distribution.

Manufactured in Germany from a proprietary aluminum/magnesium alloy, these spacers offer higher tensile strength than standard 6061-T6 billet aluminum. The hubcentric design features a full-contact hub to provide precise wheel centering and eliminate the vibration often associated with non-hubcentric alternatives.

• Thickness: 30mm
• Bolt Pattern: 5/112
• Center Bore: 57.1mm
• Thread Pitch: 14x1.5
• Series: Trak+ DRA
• Material: High-tensile proprietary alloy
• Origin: Made in Germany
• Manufacturer Part Number: 6055571

Fits select 1990-2010 Audi TT and Volkswagen Beetle, Corrado, Golf, Jetta, Passat, and R32 models (1.8T). This H&R Trak+ Wheel Adapter allows for the precise installation of 5/130 bolt pattern Porsche wheels onto Volkswagen and Audi vehicles with a 5/100 factory hub.

H&R Trak+ Wheel Adapters are hubcentric, featuring a technical design that creates a perfect fit between the vehicle hub and the wheel. This eliminates vibration and ensures your wheels are perfectly flush with the fender for an improved stance and widened track. Manufactured in Germany from a proprietary aluminum/magnesium alloy, these adapters are significantly lighter and stronger than standard spacers.

• Thickness: 30mm
• Vehicle Hub Bolt Pattern: 5/100
• Wheel Bolt Pattern: 5/130
• Vehicle Hub Bore: 57.1mm
• Wheel Center Bore: 71.6mm
• Thread Type: 14x1.5
• Material: High-strength proprietary aluminum/magnesium alloy
• Manufacturer Part Number: 60295572

Fits select 1990-2021 Subaru, Toyota, and Scion models including the BRZ, 86, FR-S, Crosstrek, Forester, Impreza, and Legacy.

H&R Trak+ Wheel Spacers (DRM Series) are engineered to widen your vehicle's track, pushing wheels out to be flush with the fender for an aggressive stance and improved lateral stability. Manufactured in Germany from a proprietary aluminum/magnesium alloy, these adaptors provide higher tensile strength than standard 6061-T6 billet aluminum while remaining exceptionally lightweight.

The DRM Series design bolts directly to the factory hub using the existing studs and the provided low-profile nuts; your wheel then seats on the integrated Trak+ studs. These are fully hubcentric with a 56mm center bore, ensuring a perfect interface with the factory hub for even load distribution and a vibration-free ride.

• Series: Trak+ DRM
• Thickness: 30mm
• Bolt Pattern: 5/100
• Center Bore: 56mm
• Thread Pitch: 12x1.25
• Material: High-tensile proprietary alloy
• Manufacturing: Made in Germany
• Part Number: 6025561

Fits select 1963-1998 Porsche 356B, 356C, 911, 928, 944, and 968 models.

H&R Trak+ DRM Wheel Adaptors are engineered to widen your vehicle's track for improved lateral stability and a flush, aggressive stance. These 28mm adaptors bolt directly to the factory hub using the included specialized hardware, while your wheels are secured to the adaptor's integrated studs. This design ensures a rock-solid fitment without the need for replacing factory wheel studs.

Manufactured in Germany from a proprietary aluminum/magnesium alloy, these adaptors provide higher tensile strength than standard 6061-T6 billet aluminum while remaining exceptionally lightweight. The hubcentric design features a full-contact hub—matching the OE profile—to ensure perfect centering, even load distribution, and vibration-free performance at high speeds.

• Thickness: 28mm
• Bolt Pattern: 5/130
• Center Bore: 71.6mm
• Thread Type: 14x1.5
• Series: Trak+ DRM
• Material: High-strength proprietary alloy
• Manufacturing: Made in Germany
• Part Number: 5695716

Fits 2017-2020 Honda Civic Type R.

H&R Trak+ DRM Series Wheel Adaptors are designed to widen the vehicle track for improved lateral stability and a flush, aggressive aesthetic. Unlike standard spacers, the DRM series bolts directly to the factory hub using the existing wheel studs, while the wheel is then secured to the adaptor's integrated M14x1.5 studs. This design allows for a 27mm increase in track width without the need for replacing factory wheel studs.

Engineered and manufactured in Germany, these adaptors are CNC-machined from a proprietary aluminum/magnesium alloy that provides higher tensile strength than standard 6061-T6 billet aluminum. The hubcentric design features a full-contact hub to ensure precise wheel centering, even load distribution, and minimized vibration.

• Thickness: 27mm
• Bolt Pattern: 5/120
• Center Bore: 64mm
• Thread Pitch: 14x1.5
• Finish: Hard-anodized black for corrosion resistance
• Material: High-tensile proprietary lightweight alloy
• Series: Trak+ DRM
• Part Number: 5475640SW

Fits select 1963-2019 Audi, Porsche, and Volkswagen vehicles, including Audi Q7, Porsche 911, 928, 944, Boxster, Cayenne, Cayman, Panamera, and VW Touareg.

H&R Trak+ DRA Series Wheel Adaptors are designed to widen your vehicle's track for improved stability and a more aggressive, flush appearance. The DRA series is unique in its installation method: the adaptor bolts to the hub using specialized hardware (included), and your existing wheel bolts then thread directly into the adaptor. This design provides a secure, mechanical fitment that simplifies wheel changes.

Every Trak+ adaptor is hubcentric, featuring a precision-machined center sleeve that acts as an extension of the hub to eliminate vibration. Produced in Germany from a proprietary aluminum/magnesium alloy, these adaptors offer higher tensile strength and lower weight than common 6061-T6 spacers.

• Series: Trak+ DRA
• Thickness: 25mm
• Bolt Pattern: 5/130
• Center Bore: 71.6mm
• Thread Type: 14x1.5
• Material: Proprietary Aluminum/Magnesium Alloy
• Manufacturing: CNC Machined in Germany
• MPN: 5095571603

Fits select 1996-2005 Jaguar XJ8, XJR, XK8, and XKR models.

H&R Trak+ DRM Series Wheel Adaptors are engineered to widen your vehicle's track, pushing the wheels out to sit flush with the fenders for an improved stance and sharper handling. These DRM series adaptors bolt directly to the factory hub using the included hardware, providing new 1/2" UNF studs for secure wheel mounting without the need for replacing factory wheel studs.

Manufactured in Germany from a proprietary aluminum/magnesium alloy, these adaptors provide higher tensile strength than standard 6061-T6 billet aluminum while remaining lightweight. The hubcentric design features a full-contact hub to ensure even load distribution and eliminate vibration by maintaining precise wheel centering, just like the factory fitment.

• Thickness: 25mm
• Bolt Pattern: 5/120.65 (5x4.75")
• Center Bore: 73.8mm
• Stud Thread: 1/2" UNF
• Series: DRM Series (Includes integrated studs)
• Material: High-strength proprietary alloy
• MPN: 5085738

Fits select 2007-2020 BMW X5 and X6 models. H&R Trak+ Wheel Spacers move your wheels outward to sit flush with the fender, providing a wider track for improved lateral stability and a more aggressive stance. These DRA Series adaptors are unique in that they bolt directly to the vehicle hub using the provided hardware, allowing your factory wheel bolts to secure the wheel to the adaptor for a clean, simplified installation.

H&R manufactures these components in Germany from a proprietary aluminum/magnesium alloy. This material offers a higher tensile strength than standard 6061-T6 billet aluminum while remaining lightweight. The hubcentric design features a full-contact hub to ensure even load distribution and maintain the precise wheel centering required for a vibration-free ride.

• Thickness: 25mm
• Bolt Pattern: 5/120
• Center Bore: 74mm
• Thread Pitch: 14x1.25
• Series: DRA
• Material: High-strength proprietary alloy
• Finish: Silver Anodized
• Origin: Made in Germany
• Manufacturer Part Number: 50757404

Fits select 2013-2020 Land Rover Discovery, Range Rover, and Range Rover Sport models.

H&R Trak+ DRM Series Wheel Spacers are designed to widen your vehicle's track for improved handling stability and a more aggressive, flush appearance. By moving the wheels out from the hubs, these spacers help eliminate unsightly fender gap and provide a custom stance without compromising ride quality. These DRM Series spacers feature integrated studs, allowing for a straightforward installation on Land Rover hubs where factory studs may be too short for slip-on alternatives.

Manufactured in Germany from a proprietary lightweight aluminum/magnesium alloy, H&R Trak+ spacers provide higher tensile strength than standard 6061-T6 billet aluminum. The hubcentric design includes a full-contact hub to ensure precise wheel centering, even load distribution, and lateral support, maintaining the integrity of your drivetrain geometry.

• Thickness: 25mm
• Bolt Pattern: 5x120
• Center Bore: 72.5mm
• Thread Pitch: 14x1.5
• Finish: Hard Anodized Black
• Material: High-strength proprietary alloy
• Series: Trak+ DRM
• Country of Origin: Germany
• Manufacturer Part Number: 50757260SW

Fits select 2013-2020 Land Rover Range Rover, Range Rover Sport, and Discovery models.

H&R Trak+ DRM Series Wheel Spacers provide a wider track and a flush, aggressive stance while improving lateral stability. These spacers are engineered to move your wheels out to the fender line, filling the wheel well and correcting factory offsets. Unlike shim-style spacers, the DRM series bolts directly to your vehicle's factory hub using the included hardware; your wheel then mounts to the spacer's integrated high-strength studs.

Manufactured in Germany from a proprietary aluminum/magnesium alloy, these spacers offer higher tensile strength than standard 6061-T6 billet aluminum. The hubcentric design features a full-contact hub—matching the factory hub profile—to ensure even load distribution, lateral support, and vibration-free operation.

• Thickness: 25mm
• Bolt Pattern: 5/120
• Center Bore: 72.5mm
• Thread Pitch: 14x1.5
• Series: Trak+ DRM
• Material: Proprietary high-tensile alloy
• Installation: Bolt-on (includes hardware)
• Manufacturer Part Number: 50757260

Fits select 2003-2016 Land Rover Discovery, Range Rover, and Range Rover Sport models.

H&R Trak+ DRM Series Wheel Spacers optimize your vehicle's stance by moving the wheels outward to sit flush with the fenders. This increased track width enhances lateral stability and handling while providing a more aggressive, tailored appearance. These DRM Series spacers bolt directly to the factory hub using provided hardware and feature their own integrated wheel studs to facilitate easy mounting of the wheel.

Manufactured in Germany, Trak+ spacers are engineered from a proprietary lightweight alloy that delivers higher tensile strength than typical 6061-T6 billet aluminum. Each spacer is hubcentric, featuring a full-contact hub face—matching the factory OE design—to ensure even load distribution and vibration-free performance.

• Thickness: 25mm
• Design: DRM Series (includes integrated studs)
• Material: High-tensile proprietary aluminum/magnesium alloy
• Hubcentric: Yes, for precise load support and lateral stability
• Installation: Bolts to factory hub; replaces worn or narrow OE offsets
• Manufacturer Part Number: 50757257
• Origin: Made in Germany

Fits select 2008-2020 BMW (2/3/4/5/6/7 Series, X3, X4, X5, X6) and Mini Cooper Paceman. These H&R Trak+ DRA Series wheel adapters are designed to widen your vehicle's track by 25mm, pushing the wheels flush with the fender for improved stance and enhanced lateral stability.

The DRA Series features a unique bolt-on design where the adapter is secured to the hub using specific hardware (included), and your factory wheel bolts are then used to mount the wheel to the adapter. This avoids the need for excessively long wheel bolts for wide applications. Each adapter is precision-machined from a proprietary aluminum/magnesium alloy, offering higher tensile strength than standard 6061-T6 billet aluminum while maintaining a lightweight profile.

• Hubcentric Fitment: Features a full-contact hub-centric design to ensure even load distribution and vibration-free performance.
• Premium Alloy: Manufactured from a proprietary metal with higher tensile strength than conventional billet.
• Durable Finish: Engineered and manufactured in Germany for long-term corrosion resistance and reliability.
• Installation: Direct bolt-on design to factory 5/120 hubs with 72.5mm center bores.

• Part Number: 50757254
• Adapter Type: DRA Series
• Thickness: 25mm
• Bolt Pattern: 5/120
• Center Bore: 72.5mm
• Thread Pitch: 14x1.25
• Material: Proprietary Lightweight Alloy

Fits select 1982-2016 BMW models, including 1, 3, 5, 6, 7, 8 Series, M-Series, X1, Z3, and Z4.

H&R Trak+ Wheel Spacers widen your vehicle's track, moving the wheels outward to be flush with the fender for improved handling and a more aggressive stance. These DRA Series spacers are designed to bolt directly to the factory hub using the included specialized hardware, while your existing wheel bolts thread into the reinforced holes of the spacer. This hubcentric design features a full-contact hub lip to ensure even load distribution and a vibration-free fitment that mimics the factory hub geometry.

Manufactured in Germany from a proprietary lightweight alloy, these spacers provide higher tensile strength than standard 6061-T6 billet aluminum. This ensures maximum durability and safety under high cornering loads.

• Manufacturer Part Number: 5075725
• Thickness: 25mm (50mm per axle)
• Bolt Pattern: 5/120
• Center Bore: 72.5mm
• Thread Pitch: 12x1.5
• Series: Trak+ DRA
• Material: High-tensile proprietary aluminum alloy
• Includes: Pair of spacers and mounting hardware

Fits select 1982-2015 BMW models with a 5/120 bolt pattern and 72.5mm hub center bore. These H&R Trak+ DRA Series adapters allow you to install wheels with a 5/112 bolt pattern and 66.5mm center bore (standard Mercedes-Benz fitment) onto your BMW hub.

H&R TRAK+® Wheel Adapters are hub-centric spacers designed to widen the vehicle track and correct wheel offsets for a flush, aggressive stance. The DRA Series is specifically engineered for ease of installation; the adapter bolts directly to the vehicle hub using the included specialized hardware, while your wheels are then secured to the adapter using your original wheel bolts. Manufactured in Germany from a proprietary aluminum/magnesium alloy, these adapters offer superior strength while remaining lighter than standard steel alternatives.

• Thickness: 25mm
• Vehicle Bolt Pattern: 5/120
• Vehicle Center Bore: 72.5mm
• Adapter Bolt Pattern (Wheel Side): 5/112
• Adapter Center Bore (Wheel Side): 66.5mm
• Thread Type: 12x1.5
• Series: Trak+ DRA
• Material: High-strength lightweight alloy
• Origin: Made in Germany
• Manufacturer Part Number: 507557252

Fits select 1979-2015 Ford Mustang, Edge, Explorer, Ranger, and Mercury Mountaineer.

Achieve a flush, aggressive stance and improved handling with H&R Trak+ DRM Series Wheel Adaptors. These 25mm spacers move your wheels outward to fill the fender gap, providing a wider track width for enhanced lateral stability. The DRM Series simplifies installation by bolting directly to your factory hub studs, effectively providing a new mounting surface with integrated 1/2in UNF studs.

H&R manufactures these adaptors in Germany using a proprietary light alloy that delivers higher tensile strength than standard 6061-T6 billet aluminum. The hubcentric design ensures a precise, full-contact fit against the factory hub for even load distribution and vibration-free performance.

• Thickness: 25mm
• Bolt Pattern: 5/114.3
• Center Bore: 70.5mm
• Stud Thread: 1/2in UNF
• Series: Trak+ DRM
• Material: High-strength proprietary aluminum/magnesium alloy
• Finish: Hard anodized
• Manufacturer Part Number: 5065705

Fits select 1991-2009 Acura Legend, Acura NSX, and Honda S2000 models. H&R Trak+ DRM Series Wheel Adaptors are engineered to widen your vehicle’s track width, improving both lateral stability and aesthetic stance. These 25mm adaptors bolt directly to the factory hub using the included H&R nuts, providing a secondary set of 12x1.5 studs for secure wheel mounting.

Precision-machined in Germany from a proprietary aluminum/magnesium alloy, these adaptors offer higher tensile strength than standard 6061-T6 billet aluminum. The hubcentric design features a full-contact hub—matching the factory hub profile—to ensure even load distribution and eliminate vibration. These are an ideal solution for achieving a flush fender fitment or providing necessary clearance for aftermarket suspension and brake components.

• Thickness: 25mm
• Bolt Pattern: 5/114.3
• Center Bore: 70.1mm
• Stud/Nut Thread: 12x1.5
• Series: Trak+ DRM
• Material: High-strength proprietary light alloy
• Manufactured in Germany
• Manufacturer Part Number: 5065700

Fits select 1990-2014 Dodge, Eagle, Ford, Hyundai, Kia, Lincoln, Mazda, Mercury, and Mitsubishi models with a 5/114.3 bolt pattern and 67.1mm hub.

H&R Trak+ Wheel Spacers move your wheels outward to be flush with the fender, instantly correcting factory offset for a more aggressive stance and improved lateral stability. The DRM Series spacers are designed to bolt directly to the factory hub using the existing wheel studs and the included specialized nuts. The wheel is then secured to the new integrated DRM studs, making these an ideal solution for achieving a wider track without the need for swapping long-stud hardware.

Precision-engineered in Germany, these spacers are manufactured from a proprietary aluminum/magnesium alloy that provides higher tensile strength than standard 6061-T6 billet aluminum. Every Trak+ spacer is hubcentric, featuring a full-contact hub face that ensures even load distribution and prevents the vibrations often associated with generic, non-hubcentric spacers.

• Part Type: Wheel Spacer / Adaptor
• Series: Trak+ DRM
• Thickness: 25mm
• Bolt Pattern: 5/114.3 (5x4.5)
• Center Bore: 67.1mm
• Thread Pitch: 12x1.5
• Material: Proprietary High-Strength Lightweight Alloy
• Manufacturer Part Number: 5065671