Fits 2023-2025 Toyota GR Corolla (Circuit Edition, Core, Morizo Edition, and Premium).

Mishimoto hub-centric wheel spacers are engineered to provide additional brake clearance, increase track width, and correct wheel fitment for a more aggressive stance. These spacers are forged from 6061-T6 aluminum, offering a superior strength-to-weight ratio essential for high-performance applications. The hub-centric design serves as a direct extension of the factory axle hub, ensuring precise centering, reduced load on the hardware, and a vibration-free driving experience.

Each spacer features pre-installed Grade 12.9 steel studs and includes all necessary lug nuts for a secure installation. To ensure long-lasting durability in harsh environments, these spacers are finished with a black anodized coating for maximum corrosion resistance.

• Forged 6061-T6 aluminum construction for maximum strength and lightness
• Hub-centric design for precise fitment and smooth operation
• Black anodized finish protects against corrosion and oxidation
• High-strength Grade 12.9 steel studs and hardware included
• Includes Mishimoto Lifetime Warranty
• Manufacturer Part Number: MMWS-005-150BK

• Thickness: 15mm
• Bolt Pattern: 5x114.3
• Center Bore: 60.1mm
• Thread Pitch: M12x1.5
• Quantity: Set of 2

Fits select 1990-2017 Hyundai, Kia, Mazda, and Mitsubishi vehicles including Elantra, Genesis Coupe, Optima, Mazda 3, and Lancer (2.0T / 1.6T).

Mishimoto hub-centric wheel spacers are engineered to provide the ideal wheel fitment by increasing track width, creating necessary clearance for big brake kits, and preventing tire rub on suspension components. Unlike universal spacers that rely solely on the lug studs to center the wheel, these are hub-centric, acting as a direct extension of the axle hub to ensure a vibration-free ride and reduced stress on your hardware.

Every spacer is forged from high-strength 6061-T6 aluminum for an optimal weight-to-strength ratio. The kits include pre-installed Grade 12.9 steel studs and matching lug nuts to ensure a secure, high-torque installation. A black anodized finish provides long-term corrosion resistance even in harsh environments.

• Forged 6061-T6 aluminum construction
• Hub-centric design for precise fitment and smooth operation
• Grade 12.9 steel studs and lug nuts
• Black anodized finish for corrosion protection
• Bolt Pattern: 5x114.3
• Center Bore: 67.1mm
• Thickness: 25mm
• Thread Pitch: M12x1.5
• Includes two (2) spacers and all necessary hardware
• Manufacturer Part Number: MMWS-004-250BK
• Mishimoto Lifetime Warranty

Fits select 1990-2017 Hyundai, Kia, Mazda, and Mitsubishi models (2.0T / 1.6T).

Mishimoto hub-centric wheel spacers are engineered to provide the ideal wheel fitment, increase track width, and create necessary clearance for upgraded brake kits. By extending the axle hub, these spacers reduce the load on your hardware compared to lug-centric alternatives, ensuring a smoother, safer driving experience without the vibration common in inferior designs.

Each spacer is forged from 6061-T6 aluminum, providing an optimal strength-to-weight ratio for rotating components. The spacers are finished in a black anodized coating for superior corrosion resistance and lasting durability. For maximum safety, every kit includes pre-installed grade-12.9 steel studs and the necessary lug nuts for a secure installation.

• Construction: Forged 6061-T6 aluminum
• Hardware: Grade-12.9 steel studs and matching lug nuts
• Design: Hub-centric for precise fitment and reduced vibration
• Finish: Black anodized for corrosion protection
• Specifications: 5x114.3 bolt pattern, 67.1mm center bore, 20mm thickness, M12x1.5 thread pitch
• Includes: Two (2) wheel spacers with pre-installed studs and all required hardware
• Warranty: Mishimoto Lifetime Warranty
• MPN: MMWS-004-200BK

Fits select 2015-2026 Subaru Ascent, Crosstrek, Forester, Legacy, Outback, WRX, and WRX STI models with a 5x114.3 bolt pattern.

Improve your vehicle's stance and solve clearance issues with the Mishimoto 20mm wheel spacer kit. These spacers are engineered to provide the necessary room for larger brake calipers or to prevent tire rub on suspension components, all while increasing track width for improved handling stability. The hub-centric design acts as a direct extension of your Subaru's axle hub, ensuring a precise wheel fitment that reduces load on the hardware and eliminates vibration for a smooth, factory-quality ride.

Construction features forged 6061-T6 aluminum for a superior strength-to-weight ratio, finished in a black anodized coating for long-term corrosion resistance. For safety, Mishimoto utilizes grade-12.9 steel studs and matching lug nuts to ensure the assembly remains secure under high-stress driving conditions.

• Thickness: 20mm
• Bolt Pattern: 5x114.3
• Center Bore: 56.1mm
• Thread Pitch: M12x1.25
• Material: Forged 6061-T6 Aluminum
• Stud Grade: 12.9 Steel
• Finish: Black Anodized
• Part Number: MMWS-003-200BK

Includes: Two (2) wheel spacers with pre-installed studs, and all necessary mounting hardware. Covered by the Mishimoto Lifetime Warranty.

Fits select 2015-2026 Subaru Ascent, Crosstrek, Forester, Legacy, Outback, WRX, and WRX STI.

Mishimoto hub-centric wheel spacers are designed to improve vehicle stability and aesthetics by increasing track width and providing critical clearance for larger brake calipers or wider tires. These spacers act as a direct extension of the axle hub, ensuring the wheel is centered precisely to eliminate vibration and reduce stress on the wheel studs.

Constructed from forged 6061-T6 aluminum, these spacers provide an ideal strength-to-weight ratio for performance applications. Each spacer features a black anodized finish for long-term corrosion resistance in harsh environments. To ensure a safe installation, Mishimoto includes pre-installed Grade 12.9 steel studs and all necessary mounting hardware.

• Forged 6061-T6 aluminum construction for maximum durability and weight savings
• Hub-centric design ensures precise wheel centering and smooth driving
• Black anodized finish for superior protection against the elements
• Includes Grade 12.9 steel studs and required lug nuts
• Thickness: 15mm
• Bolt Pattern: 5x114.3
• Center Bore: 56.1mm
• Thread Pitch: M12x1.25
• Manufacturer Part Number: MMWS-003-150BK
• Backed by the Mishimoto Lifetime Warranty

Fits select 1991-2019 Acura and Honda vehicles, including Accord, Civic, NSX, RSX, S2000, and TLX (5x114.3 bolt pattern, 64.1mm center bore).

Mishimoto 20mm wheel spacers are engineered to improve vehicle stance, increase track width, and provide necessary clearance for oversized brake calipers or suspension components. Unlike universal spacers, these feature a hub-centric design that acts as a precise extension of the axle hub. This ensures the wheel load is properly supported by the hub rather than the studs alone, eliminating vibration and ensuring a smooth, safe driving experience.

Constructed for maximum durability without unnecessary unsprung weight, each spacer is forged from 6061-T6 aluminum and finished in a black anodized coating for superior corrosion resistance. The kit comes ready for installation with high-strength grade-12.9 steel studs pre-installed and all necessary mounting hardware included.

• Forged 6061-T6 aluminum construction for optimal strength-to-weight ratio
• Hub-centric design ensures precise fitment and reduced hardware stress
• High-strength grade-12.9 steel studs and lug nuts for secure mounting
• Black anodized finish protects against oxidation and environmental wear
• Thickness: 20mm | Bolt Pattern: 5x114.3 | Center Bore: 64.1mm | Thread Pitch: M12x1.5
• Includes two (2) spacers and a Mishimoto Lifetime Warranty
• Manufacturer Part Number: MMWS-002-200BK

Fits select 1991-2019 Acura and Honda models (5x114.3 bolt pattern / 64.1mm center bore).

Mishimoto hub-centric wheel spacers provide a reliable solution for increasing track width, creating clearance for oversized brake calipers, or achieving a flush wheel-to-fender fitment. Unlike universal spacers, these are designed as a direct extension of the axle hub, ensuring the wheel remains centered to eliminate vibrations and reduce stress on the wheel studs. Each spacer is forged from 6061-T6 aluminum, providing a high strength-to-weight ratio that withstands the rigors of spirited driving without adding excessive unsprung mass.

Every kit includes two spacers finished in a durable black anodized coating to resist corrosion in harsh environments. To ensure a secure installation, Mishimoto equips these spacers with high-strength grade-12.9 steel studs and matching lug nuts. These spacers are engineered to meet the strict tolerances required for smooth, safe operation on both the street and the track.

• Forged 6061-T6 aluminum construction for maximum durability
• Hub-centric design for precise wheel centering and vibration-free performance
• Grade-12.9 steel studs and hardware for superior tensile strength
• Black anodized finish provides long-term corrosion resistance
• Thickness: 15mm
• Bolt Pattern: 5x114.3
• Center Bore: 64.1mm
• Stud Thread Pitch: M12x1.5
• Manufacturer Part Number: MMWS-002-150BK
• Includes Mishimoto Lifetime Warranty

Fits select 2015-2026 Ford Mustang, 2020-2021 Ford Explorer, and 2020 Lincoln Aviator.

Mishimoto hub-centric wheel spacers provide a precise solution for increasing track width, creating brake caliper clearance, and achieving the perfect flush wheel fitment. Engineered for vehicles with a 5x114.3 bolt pattern and 70.5mm center bore, these spacers act as a direct extension of the axle hub. This hub-centric design ensures the load is supported by the hub rather than the studs alone, eliminating vibrations and ensuring a smooth, safe ride at any speed.

• Forged 6061-T6 aluminum construction for a superior strength-to-weight ratio
• Hub-centric design provides a precise fit and reduces load on mounting hardware
• High-strength grade 12.9 steel studs and lug nuts for secure installation
• Black anodized finish prevents corrosion and maintains a clean look
• Thickness: 25mm
• Bolt Pattern: 5x114.3
• Center Bore: 70.5mm
• Hardware Thread: M14x1.5
• Includes two (2) spacers with pre-installed studs and required hardware
• Mishimoto Lifetime Warranty
• Manufacturer Part Number: MMWS-001-250BK

Fits select 2015-2026 Ford Mustang, Explorer, and Lincoln Aviator models.

Mishimoto hub-centric wheel spacers are designed to provide essential clearance for large brake calipers, eliminate tire rub, and widen your vehicle's track for a more aggressive stance and improved stability. These 15mm spacers feature a hub-centric design that acts as a direct extension of the axle hub, ensuring a precise, vibration-free fitment that reduces mechanical load on the mounting hardware compared to generic alternatives.

• Forged Aluminum Construction: Precision CNC-machined from 6061-T6 forged aluminum for a superior strength-to-weight ratio.
• High-Strength Hardware: Equipped with pre-installed Grade-12.9 steel studs and matching lug nuts for a secure, high-torque installation.
• Corrosion Resistance: Finished in a durable black anodized coating to withstand harsh road conditions and oxidation.
• Technical Specifications: Features a 5x114.3 bolt pattern, 70.5mm center bore, and M14x1.5 thread pitch.

Each kit (MPN: MMWS-001-150BK) includes two wheel spacers and all necessary hardware for a complete axle installation. This kit is backed by the Mishimoto Lifetime Warranty.

Ensure precise beadlock ring seating and proper torque with the Method Race Wheels Beadlock Spacer Kit. These spacers are engineered specifically for 17-inch beadlock wheels to adjust the gap between the ring and the wheel flange. This adjustment is critical for maintaining an airtight seal and secure tire retention, particularly when mounting tires with thicker bead bundles that might otherwise prevent the ring from seating correctly.

Each spacer is precision-machined from 6061-T6 aluminum, providing the high strength-to-weight ratio required for off-road racing and heavy-duty trail use. The 3/16-inch thickness provides the necessary clearance to prevent the beadlock ring from bottoming out against the wheel surface before the tire bead is fully compressed.

• Fits 17-inch Method Race Wheels beadlock wheels
• Precision-machined from 6061-T6 aluminum for durability
• 3/16-inch thickness for optimal clamping force adjustment
• Complete 4-piece kit for a full vehicle set
• Manufacturer Part Number: SK-SPC17316

This Method Race Wheels Beadlock Spacer Kit is designed to provide the necessary clearance for tires with thicker-than-standard beads. By installing these spacers between the wheel and the beadlock ring, you ensure proper clamping force and prevent the ring from "coning" or bottoming out against the wheel surface during installation.

Each spacer is precision-machined from high-grade 6061 aluminum for exceptional durability and corrosion resistance in off-road environments. This kit is a direct fit for 15-inch Method beadlock wheels and provides 3/16-inch of additional spacing to maintain optimal tire retention and seal integrity.

• Material: Machined 6061 Aluminum
• Thickness: 3/16 inch (4.76mm)
• Compatibility: Designed for 15-inch beadlock wheels
• Quantity: 4-piece kit (Set of 4 spacers)
• Manufacturer Part Number: SK-SPC15316

Gain the necessary clearance for oversized brake calipers or suspension components with the ISR Performance 5mm wheel spacer. This slip-on spacer provides a precise increase in track width, allowing you to fine-tune wheel fitment for a flush stance without the need for complex modifications.

• Thickness: 5mm
• Dual Bolt Pattern: 4x114.3 and 5x114.3
• Center Bore: 66.1mm
• Quantity: Sold individually
• Manufacturer Part Number: IS-451143-5

The 66.1mm hub bore is specifically sized for a wide range of Nissan and Infiniti hubs, ensuring a centered fitment. Because these are sold individually, they are ideal for staggered setups or replacing a single damaged unit.

Fits select 1990-2015 Nissan 240SX, 300ZX, 350Z, 370Z, Altima, GT-R, Maxima, Quest, Rogue, and Sentra.

Achieve a flush fitment or gain necessary clearance for aftermarket suspension and braking components with this pair of ISC Suspension 15mm wheel spacers. These spacers are engineered with a hub-centric design specific to the 66mm Nissan hub bore, ensuring the wheel remains centered for vibration-free operation at high speeds. Each spacer is finished in black anodizing for corrosion resistance and a low-profile appearance behind the wheel face.

• Thickness: 15mm
• Bolt Pattern: 5x114.3
• Hub Bore: 66mm
• Finish: Black Anodized
• Quantity: Pair (2 Spacers)
• Hub-centric design for precise wheel centering
• Manufacturer Part Number: WSNS15B

Widen your vehicle's track and achieve the perfect fitment with ISC Suspension 15mm Hub Centric Wheel Spacers. Designed for vehicles with a 5x114 bolt pattern, these spacers move the wheel out from the hub to improve aesthetics, increase stability, and provide necessary clearance for larger brake calipers or suspension components.

These spacers feature a hub-centric design, ensuring the wheel is centered perfectly on the vehicle hub to eliminate vibration and maintain a smooth ride at highway speeds. Finished in a durable black coating for corrosion resistance, they are built to withstand the rigors of both daily driving and track use.

• Manufacturer Part Number: WS5X11415B
• Thickness: 15mm
• Bolt Pattern: 5x114
• Design: Hub Centric for precise fitment and vibration-free operation
• Color: Black Finish
• Quantity: Sold as a Pair (2 spacers)
• Hardware: Includes pre-pressed studs for secure installation

Achieve a wider stance and improved wheel fitment with this pair of ISC Suspension wheel spacers. These 15mm spacers are engineered to provide the necessary clearance for larger brake calipers or to push wheels out for a more aggressive, flush look. CNC-machined for precise tolerances, they ensure consistent performance and durability under load.

These spacers feature a hub-centric design, which centers the spacer directly onto the vehicle's hub. This technical configuration is essential for maintaining wheel balance and eliminating the steering wheel vibrations often caused by generic lug-centric alternatives. The black anodized finish offers superior corrosion resistance against road salt and moisture while maintaining a low-profile aesthetic behind the wheel spokes.

• Thickness: 15mm
• Bolt Pattern: 5x100
• Hub Centric design for vibration-free installation
• Material: CNC-machined construction
• Finish: Black Anodized
• Quantity: Pair (2 spacers)
• Manufacturer Part Number: WS5X10015B

Expand your wheel options with the ISC Suspension WA25B wheel adapter set. These precision-engineered adapters allow you to install wheels with a 5x114 bolt pattern on vehicles originally equipped with 5x100 hubs. At 25mm thick, they provide additional clearance for suspension and brake components while pushing the wheels outward for a more aggressive, flush fitment.

Finished in a durable black coating, these adapters are designed to withstand the elements and maintain a clean appearance behind your wheels. This complete set includes four adapters and the necessary hardware to secure the adapters to your factory studs, ensuring a straightforward installation process.

• Pattern Conversion: 5x100 (Hub) to 5x114 (Wheel)
• Thickness: 25mm
• Color: Black finish
• Quantity: Set of 4 adapters
• Hardware Included: Yes
• Manufacturer Part Number: WA25B

Fits 2002-2020 Mercedes-Benz G500, G550, G550 4x4, G55 AMG, G63 AMG, and G65 AMG models.

H&R Trak+ DRA Series Wheel Spacers are designed to widen your vehicle's track for improved handling and a more aggressive, flush appearance. Unlike standard spacers, the DRA series bolts directly to your vehicle's hub using special low-profile hardware, allowing you to use your original lug bolts to secure the wheel to the spacer. This system ensures a secure fitment and easy installation for heavy-duty applications like the Mercedes-Benz G-Class.

Manufactured in Germany from a proprietary aluminum/magnesium alloy, these spacers offer higher tensile strength than standard 6061-T6 billet aluminum. Each spacer is hubcentric, featuring a full-contact 84mm hub pilot to distribute load forces evenly across the hub face, preventing the vibration often found with universal, non-hubcentric alternatives.

• Thickness: 35mm
• Bolt Pattern: 5/130
• Center Bore: 84mm
• Thread Pitch: 14x1.5
• Series: Trak+ DRA
• Material: High-strength proprietary alloy
• Finish: Black Anodized
• Manufacturing: Made in Germany
• Manufacturer Part Number: 70958410SW

Fits select 1963-1998 Porsche 356B, 356C, 911, 928, 944, and 968 models.

H&R Trak+ DRM Series wheel adaptors are engineered to widen your vehicle's track, providing a flush-to-fender stance and improved lateral stability. These DRM spacers bolt to the factory hub using the existing studs and the included special nuts; your wheel is then secured to the new integrated studs on the spacer. This design ensures a secure fit for wider offset requirements.

Manufactured in Germany from a proprietary aluminum/magnesium alloy, these adaptors offer a higher tensile strength than standard 6061-T6 billet aluminum. Each unit is hubcentric, featuring a full-contact hub design that mirrors the factory geometry for even load distribution and vibration-free performance.

• Thickness: 35mm
• Bolt Pattern: 5/130
• Center Bore: 71.6mm
• Thread Pitch: 14x1.5
• Material: High-strength proprietary lightweight alloy
• Design: DRM Series (bolts to hub, includes integrated studs)
• Manufacturing: Made in Germany
• Manufacturer Part Number: 7095716

Fits 2002-2020 Mercedes-Benz G-Class models including G500, G550, and AMG variants (G55, G63, G65).

H&R Trak+ DRA Series wheel spacers widen your vehicle's track to move wheels flush with the fenders for improved lateral stability and a corrected stance. The DRA Series design features a unique installation method where the spacer bolts directly to the hub using provided hardware, allowing your factory lug bolts to secure the wheel into the spacer's integrated threads.

Every Trak+ spacer is hubcentric, featuring a full-contact hub face that mimics the factory geometry for precise load distribution and vibration-free operation. These spacers are CNC-machined in Germany from a proprietary aluminum/magnesium alloy that provides higher tensile strength than standard 6061-T6 billet aluminum.

• Thickness: 31mm
• Bolt Pattern: 5/130
• Center Bore: 84mm
• Bolt Thread: 14x1.5
• Series: Trak+ DRA
• Material: High-strength proprietary light alloy
• Finish: Black Anodized
• Manufacturer Part Number: 62958410SW

Fits select 2002-2020 Mercedes-Benz G-Class models including G500, G550, G55 AMG, G550 4x4, G63 AMG, and G65 AMG.

H&R Trak+ DRA Series Wheel Adaptors are engineered to widen your vehicle's track, pushing the wheels out to sit flush with the fender for an aggressive stance and improved lateral stability. The DRA Series is unique: the adaptor bolts directly to the vehicle hub using the included specialized hardware, and your existing lug bolts are then used to secure the wheel to the adaptor. This provides a secure, easy-to-install solution for vehicles requiring significant offset correction.

Each adaptor is precision-manufactured in Germany from a proprietary lightweight aluminum/magnesium alloy. This material offers higher tensile strength than standard 6061-T6 billet aluminum, ensuring durability under heavy loads. These adaptors are fully hubcentric, featuring a full-contact hub design that replicates the factory mounting surface for even load distribution and vibration-free performance.

• Part Number: 62958410
• Thickness: 31mm
• Bolt Pattern: 5/130
• Center Bore: 84mm
• Thread Type: M14x1.5
• Series: DRA
• Material: High-tensile proprietary alloy
• Country of Origin: Germany

Fits select 1997-2019 Porsche 911, Boxster, Cayman, 718 Cayman, and Cayenne models.

H&R Trak+ DRA Series Wheel Spacers are engineered to move your wheels flush with the fenders for a perfect stance and improved lateral stability. Unlike standard spacers, the DRA Series bolts directly to the factory hub with special hardware (included), while your wheels are then secured to the spacer using your original wheel bolts. This design is ideal for wider applications like this 30mm set, ensuring a secure fit without the need for extra-long wheel studs.

Manufactured in Germany from a proprietary lightweight aluminum/magnesium alloy, these spacers offer higher tensile strength than standard 6061-T6 billet. Each spacer is fully hubcentric, featuring a full-contact hub face to ensure even load distribution and a vibration-free ride.

• Series: Trak+ DRA Series
• Width: 30mm
• Bolt Pattern: 5/130
• Center Bore: 71.6mm
• Thread Type: 14x1.5
• Material: High-strength proprietary aluminum/magnesium alloy
• Finish: Silver
• Manufacturer Part Number: 60957160

Fits 2007-2020 BMW X5 and 2008-2019 BMW X6 models.

H&R Trak+ DRA Series Wheel Adapters provide a 30mm increase in track width, pushing your wheels out to be flush with the fenders for a corrected stance and improved lateral stability. Unlike standard spacers, the DRA system bolts directly to the vehicle hub using the included specialized hardware; your original wheel bolts are then used to secure the wheel to the threaded holes in the adapter.

Engineered for precision and safety, these adapters are manufactured from a proprietary aluminum/magnesium alloy that offers higher tensile strength than standard 6061-T6 billet. The hubcentric design features a full-contact hub to ensure even load distribution and eliminate vibration by maintaining a perfect centering of the wheel.

• Thickness: 30mm per side
• Bolt Pattern: 5/120
• Center Bore: 74mm
• Thread Pitch: 14x1.25
• Series: Trak+ DRA System
• Material: High-strength proprietary alloy
• Origin: Made in Germany
• Manufacturer Part Number: 60757404

Fits select 2013-2020 Land Rover Discovery, Range Rover, and Range Rover Sport models.

H&R Trak+ DRM Series wheel adaptors are engineered to widen your vehicle's track, providing a flush wheel-to-fender fitment that improves both lateral stability and stance. The DRM series is designed to bolt directly to the factory hub using existing studs, featuring its own integrated wheel studs for a secure, streamlined installation. These adaptors are hubcentric, utilizing a full-contact hub design that ensures even load distribution and maintains the balance of your factory drivetrain.

Constructed in Germany from a proprietary lightweight alloy, these adaptors offer higher tensile strength than standard 6061-T6 billet aluminum. The black hard-anodized finish ensures long-term durability and corrosion resistance while blending seamlessly with your wheels and braking components.

• Thickness: 30mm
• Bolt Pattern: 5/120
• Center Bore: 72.5mm
• Stud Thread: 14x1.5
• Series: Trak+ DRM
• Material: Proprietary High-Strength Alloy
• Finish: Black Anodized
• Manufacturer Part Number: 60757260SW

Fits select 1982-2016 BMW 1, 3, 5, 6, 7, 8 Series, M-Series, X1, Z3, and Z4 models. Please verify specific model compatibility below.

H&R Trak+ Wheel Spacers move your wheels out to be flush with the fender, widening the vehicle track for improved lateral stability and a more aggressive stance. These DRA Series adaptors bolt directly to the factory hub with provided special hardware, allowing the wheel to be secured to the adaptor using the original wheel bolts. This design is ideal for thicker spacer applications where longer wheel bolts may not be practical.

Constructed from a proprietary aluminum/magnesium alloy, these spacers offer higher tensile strength than standard 6061-T6 billet aluminum. They feature a fully hubcentric design with a full-contact hub face to ensure even load distribution and prevent vibration. Each kit is precision-engineered and manufactured in Germany to strict ISO 9001 quality standards.

• Thickness: 30mm
• Bolt Pattern: 5/120
• Center Bore: 72.5mm
• Thread Type: 12x1.5
• Series: Trak+ DRA
• Material: High-tensile proprietary light alloy
• Design: Hubcentric for precise fitment
• Finish: Clear anodized for corrosion resistance
• Manufacturer Part Number: 6075725