Fits the Lexus IS300.

Replace compromised factory hardware or prepare your vehicle for high-performance driving with this ARP wheel stud. Engineered to exceed the demands of racing and spirited street use, these studs provide the strength and fatigue resistance necessary to keep your wheels securely fastened under heavy lateral loads and high heat.

• Thread Size: M12 x 1.5
• Length: 1.5 in
• Material: Heat-treated 8740 chromoly steel
• Tensile Strength: 200,000 psi
• Precision J-form threads for superior fatigue resistance and consistent torque
• Quantity: Single stud (replaces one factory wheel stud)
• Finish: Cadmium plated for long-term corrosion resistance

ARP fasteners are the choice of professional racers globally, offering far greater safety margins than standard OE hardware. This single stud is perfect for replacing a damaged fastener without the need to purchase a complete set.

Fits 1995-1998 Nissan 240sx (S14) front hubs.

ISR Performance 70mm extended wheel studs provide the necessary length for safely running wheel spacers or aftermarket wheels with thick center faces. Increasing the stud length ensures full thread engagement with your lug nuts, a vital requirement for both street driving and high-performance track use where wheel security is paramount.

These studs are designed as a direct replacement for factory hardware, featuring the specific 14.25mm knurl diameter required for a secure press-fit into the S14 front hub assembly.

• Extended 70mm length for spacer compatibility
• 14.25mm knurl diameter for precise front hub fitment
• High-strength construction for reliable wheel retention
• Direct replacement for OE front wheel studs
• Manufacturer Part Number: IS-WHS-1425

Fits 1989-1994 Nissan 240SX S13 (Front/Rear) and S14 (Rear).

These ISR Performance 70mm extended wheel studs are an essential upgrade for vehicles utilizing slip-on wheel spacers or aftermarket wheels with thick center hubs. By extending the stud length beyond the factory specifications, these units ensure proper thread engagement and lug nut seating, which is critical for maintaining hub integrity during high-load cornering or track use. These studs are designed with a 12.85mm knurl diameter for a precise press-fit into compatible Nissan hubs.

• Overall Length: 70mm
• Knurl Diameter: 12.85mm
• Application: Replaces factory studs to accommodate spacers or thicker wheel faces
• Fitment: 1989-1994 S13 (All) and S14 (Rear Only)
• Manufacturer Part Number: IS-WHS-1285

The H&R Quick-Safe wheel bolt-to-stud conversion kit replaces cumbersome factory wheel bolts with high-quality studs, streamlining wheel mounting and reducing service times. These studs are engineered for precision and durability, featuring a shouldered base that ensures secure seating against the hub. Each stud comes pre-treated with a specialized thread-locking compound to ensure a reliable, permanent installation into the vehicle's hub.

• Converts factory wheel bolt hubs to a stud-and-nut setup for faster wheel changes
• Pre-treated with high-strength thread locking compound for secure fitment
• Shouldered design provides precise seating and stability
• Corrosion-resistant silver finish protects against the elements
• Integrated hex key socket allows for efficient installation
• Manufactured in Germany to exacting standards
• Thread: M12 x 1.5
• Length: 50mm
• Manufacturer Part Number: 1255005

The H&R Quick-Safe Wheel Bolt-to-Stud Conversion Kit (MPN 1457005) streamlines wheel changes by replacing cumbersome factory wheel bolts with high-strength wheel studs. Ideal for track applications and enthusiasts who frequently swap wheel sets, this conversion kit allows for faster, easier alignment and secure mounting.

• Specifications: M14 x 1.5 thread pitch and 70mm total length.
• Secure Installation: Each stud features a shouldered design for precise seating against the hub and an integrated hex key socket for straightforward installation.
• Ready to Install: Pre-treated with a specialized thread-locking compound to ensure a permanent, vibration-resistant bond to the hub.
• Durability: Finished in a corrosion-resistant silver coating to withstand environmental exposure and repeated use.
• Quality Engineering: Precision-manufactured in Germany to H&R's rigorous standards for fitment and material strength.

H&R Wheel Studs are precision-engineered for secure wheel fitment, whether you are performing an OE replacement or installing wheel spacers that require extended hardware. Manufactured in Germany to exacting standards, these studs provide the high tensile strength and reliable thread engagement necessary for safe vehicle operation.

• Thread Size: 12 x 1.5
• Overall Length: 35mm
• Application: Suitable for OE replacement or use with wheel spacers
• Origin: Made in Germany
• Manufacturer Part Number: 1253544

H&R hardware is designed for durability and corrosion resistance. Always verify your specific thread pitch and length requirements before installation to ensure proper seating and torque specs. Sold individually.

Fits 2002-2006 Mitsubishi Lancer and Evolution models including ES, LS, Ralliart, and Evolution MR/RS/SE.

Secure your wheels with the industry-standard strength of ARP wheel studs. This kit is designed to replace factory hardware that may be prone to stretching or fatigue under the high loads of performance driving, track use, or when using aftermarket wheels and spacers. Engineered for precision and durability, these studs provide the consistent clamping force necessary for safe operation on and off the circuit.

• Manufacturer Part Number: 100-7717
• Quantity: 5 Studs (Covers one wheel)
• Direct replacement for OE Mitsubishi wheel studs
• Compatible with 2002-2006 Mitsubishi Lancer (all trims) and Evolution 8/9

The Wilwood 230-2187 is a high-strength fastener specifically designed for use with Wilwood Heavy Duty (HD) hub assemblies. This 12-point bolt serves as a critical component in securing the rotor hat to the hub, engineered to handle the high shear loads and thermal expansion typical of high-performance braking environments.

Constructed from premium alloy steel, this fastener undergoes specialized plating to ensure corrosion resistance and consistent torque application. The 1/2-20 thread pitch and 1.75-inch length provide the precise engagement required for a secure, professional-grade installation on HD-series hubs.

• Thread Pitch: 1/2-20
• Fastener Length: 1.75 inches
• Head Style: 12-Point
• Material: High-strength alloy steel
• Application: Specifically for Wilwood HD Hub assemblies
• Manufacturer Part Number: 230-2187

Upgrade your wheel mounting system from cumbersome lug bolts to a racing-style stud and nut configuration with the Wheel Mate Stud Conversion kit. This conversion simplifies wheel changes by allowing you to hang the wheel on the studs rather than lining up bolt holes, making it an essential modification for track-day enthusiasts and those who frequently rotate wheels.

• Thread Conversion: Converts M14 x P1.25 (hub side) to the more common M14 x P1.50 (nut side).
• Length: 75mm overall length provides ample thread engagement and allows for the use of various wheel spacers or open-ended lug nuts.
• Finish: Durable Nickel coating offers excellent corrosion resistance and a clean, metallic look.
• Quantity: Complete set of 20 studs, sufficient for most 5-lug vehicle applications.

Precision-machined to ensure consistent tolerances and reliable torque retention, these studs replace the factory hardware on vehicles using M14x1.25 thread pitches. Please verify that your chosen lug nuts match the M14x1.50 conversion side thread.

• Manufacturer Part Number: WMP37105XLN0
• Material: High-strength steel
• Finish: Nickel
• Thread Pitch (Hub): M14x1.25
• Thread Pitch (Nut): M14x1.50

Simplify wheel changes and reduce unsprung weight with the Wheel Mate Titanium Wheel Stud Conversion kit. This hardware allows you to transition from factory wheel bolts to a dedicated stud and nut setup, making wheel mounting faster and more precise for track use or frequent maintenance. Machined from high-strength titanium, these studs offer exceptional corrosion resistance and a superior strength-to-weight ratio compared to traditional steel hardware.

This conversion specifically adapts the vehicle's M14x1.25 hub threads to a more common M14x1.5 lug nut thread. The 74mm overall length provides ample thread engagement for various wheel offsets and spacer configurations, while the Raw Ti finish provides a clean, technical aesthetic.

• Material: High-strength Titanium
• Finish: Raw Ti
• Hub Thread: M14x1.25
• Stud Thread: M14x1.5
• Total Length: 74mm
• Seat Compatibility: 60-degree conical (for compatible lug nuts)
• Part Number: TIM14C6074R

Wheel Mate extended wheel studs are engineered for vehicles requiring additional thread length, typically when installing wheel spacers or aftermarket wheels with thick hub mounting faces. These studs provide the extra reach necessary to ensure proper thread engagement, a critical safety requirement for both street and track applications.

• Thread Pitch: 12x1.5mm
• Overall Length: 75mm
• High-strength steel construction for maximum durability and fatigue resistance
• Essential for maintaining safe lug nut torque when utilizing spacers
• Manufacturer Part Number: 37102XL

Ensure secure wheel fitment for performance and racing applications with these Moroso press-in wheel studs. Designed to provide the additional length required for thick-hub aftermarket wheels or when using spacers, these studs ensure proper thread engagement and meet sanctioned racing safety requirements.

• Thread Size: 1/2in-20
• Overall Length: 3in
• Construction: High-grade heat-treated alloy steel for maximum shear strength
• Application: Press-in style replacement for standard wheel studs
• Quantity: Set of 5 studs
• Manufacturer Part Number: 46185

Professional installation is recommended to ensure the knurled shoulder is properly seated into the vehicle hub. These studs are engineered to withstand the high stress of drag racing and track use while maintaining precise tolerances.

Upgrade your wheel hardware for increased safety and compatibility with these high-strength Moroso press-in wheel studs. Designed to meet the demands of drag racing and performance driving, these 3-inch studs provide the necessary length to accommodate thick-centered aftermarket wheels and meet sanctioning body requirements for thread engagement. These studs serve as a robust replacement for standard OE hardware, ensuring a secure hub-to-wheel connection under high-torque loads.

• Manufacturer Part Number: 46180
• Stud Diameter: 1/2in
• Length: 3in
• Installation Type: Press-in
• Quantity: Set of 5 studs

Upgrade your wheel hardware for racing and high-performance applications with Moroso 46160 Press-In Wheel Studs. These extended-length studs are designed to accommodate thicker wheel centers and spacers while providing the superior shear strength required for track use. Manufactured from high-tensile Grade 8 steel, they are engineered to withstand the rigors of frequent wheel changes and high-torque launches.

• Thread Size: 7/16in-20
• Length: 2-7/8in (Measured from under the head to the end of the stud)
• Knurl Diameter: .480in
• Material: High-strength Grade 8 steel for maximum durability
• Finish: Zinc-plated for corrosion resistance
• Quantity: Set of 5 studs
• Installation: Press-in design for secure hub or axle flange fitment
• MPN: 46160

The H&R Quick-Safe Wheel Bolt-to-Stud Conversion kit allows you to replace factory wheel bolts with a high-performance stud and lug nut configuration. Preferred by racers for significantly faster pit stops and easier wheel alignment during mounting, these studs provide a more secure and efficient method for securing your wheels.

• Precision Engineering: Manufactured in Germany and shouldered for secure seating against the hub.
• Integrated Safety: Pre-treated with a thread-locking compound to ensure a stable, permanent installation.
• Durable Construction: Features a corrosion-resistant silver finish for long-term durability in all driving conditions.
• Simplified Installation: Designed with a hex key socket for fast and easy installation using the included tool.

• Thread Pitch: M14 x 1.5
• Total Length: 60mm
• Finish: Silver
• Manufacturer Part Number: 1456005
• Includes: Conversion studs and hex installation key

H&R Quick-Safe Wheel Bolt-to-Stud Conversion kits allow you to replace cumbersome factory wheel bolts with a dedicated stud and nut setup. This transition streamlines wheel swaps—a critical advantage during track-day pit stops or routine tire rotations—by providing a fixed mounting point to hang the wheel while you secure the lug nuts. This eliminates the struggle of aligning heavy wheels with the hub while simultaneously trying to thread a bolt.

These M14x1.5 studs are engineered for durability and precise fitment. Each stud features a shouldered base for secure seating against the hub and comes pre-treated with a specialized thread-locking compound to ensure a permanent, vibration-resistant bond once installed. The integrated hex key socket at the tip facilitates a straightforward installation into the factory hub using standard tools.

• Thread Pitch: M14 x 1.5
• Total Length: 50mm
• Construction: Shouldered base for secure seating and stability
• Coating: Corrosion-resistant silver finish
• Installation: Integrated hex key socket for fast, easy install
• Quality: Precision engineered and made in Germany
• Part Number: 1455005

H&R Quick-Safe wheel bolt-to-stud conversion kits replace factory lug bolts with fixed studs, simplifying wheel changes and improving alignment during mounting. This system, favored in professional motorsport for faster pit stops, eliminates the difficulty of balancing a wheel while searching for bolt holes. Each M14 x 1.5 stud features a 40mm length and is engineered for precise fitment and long-term durability.

• Simplified Wheel Mounting: Converts factory bolt-style hubs to studs for quicker, easier wheel installation and removal.
• Secure Seating: Shouldered design ensures positive seating against the hub, while pre-applied thread-locking compound prevents loosening.
• Robust Finish: Corrosion-resistant silver coating protects the hardware against the elements and road salt.
• Integrated Hex Socket: Features an internal hex key socket for efficient installation without damaging the threads.
• German Quality: Precision-engineered and manufactured in Germany (MPN: 1454005).

Transition your vehicle from traditional wheel bolts to a high-performance stud configuration with the H&R Quick-Safe Wheel Bolt-to-Stud Conversion kit. Designed to streamline wheel changes and provide more secure wheel mounting, these studs are essential for track-driven vehicles and enthusiasts requiring faster, easier wheel swaps.

• Secure Seating: Engineered with a built-in shoulder for precise and secure seating against the hub face.
• Installation Ready: Features an integrated hex key socket for fast installation and is pre-treated with a specialized thread-locking compound.
• Corrosion Protection: Finished in a durable, corrosion-resistant silver coating to withstand harsh environments and repeated use.
• Made in Germany: Manufactured to exacting standards for high-strength reliability.

Technical Specifications:

• Thread: M12 x 1.5
• Overall Length: 70mm
• Finish: Silver
• MPN: 1257005
• Includes: Hex key for installation

H&R specialty wheel studs provide a reliable, high-strength solution for securing wheels to your vehicle's hub. These studs are engineered for precision and durability, making them an ideal choice for replacing worn factory hardware or providing the necessary extended length for wheel spacer installations. Manufactured in Germany, every stud is built to withstand the stresses of daily driving and performance use.

This press-in wheel stud features an M12 x 1.5 thread pitch and a 50mm overall length. The 14.20mm knurl diameter ensures a proper interference fit within the hub assembly to prevent the stud from spinning during torque application.

• Thread Pitch: M12 x 1.5
• Total Length: 50mm
• Knurl Diameter: 14.20mm
• Installation Type: Press-in
• Origin: Made in Germany
• Part Number: 1255044

Secure your wheel assembly with this H&R M12 x 1.5 wheel stud replacement. Engineered for precision and reliability, these studs are designed to meet or exceed OE hardware standards, making them an ideal choice for replacing worn factory studs or providing the necessary thread engagement for use with wheel spacers. Each stud is manufactured in Germany from high-tensile materials to ensure maximum strength and durability under load.

• Thread Size: M12 x 1.5
• Shank Length: 45mm
• Application: Replacement or extended stud for spacer installations
• Materials: High-quality steel construction
• Country of Origin: Germany
• Manufacturer Part Number: 1254544

Proper wheel fastening is critical for safety; always ensure you have the correct thread pitch and shank length for your specific hub and wheel combination before installation. These studs are available to support various seat types and custom configurations.

H&R Wheel Studs provide a precision-engineered solution for vehicles requiring extended hardware for wheel spacers or high-strength OE replacements. Manufactured in Germany from high-tensile alloy steel, these studs are designed to withstand the shear and clamping forces required for secure wheel fitment. Whether you are performing a stud conversion or accommodating thicker wheel hubs, H&R hardware ensures proper thread engagement and a secure seat.

• Thread Pitch: M12 x 1.25
• Total Length: 45mm
• Knurl Diameter: 14.25mm
• Material: High-strength alloy steel
• Finish: Durable corrosion-resistant coating
• Use Case: Ideal for use with wheel spacers or as heavy-duty OE replacements
• Origin: Made in Germany
• Part Number: 12254524

BLOX Racing Forged Extended Wheel Studs provide the necessary thread engagement for vehicles utilizing wheel spacers or aftermarket wheels with thicker hub faces. These studs are a critical safety upgrade for performance street builds and track-driven cars requiring precise wheel fitment and increased stud length.

Each stud is manufactured using a high-pressure forging process to ensure superior material density and resistance to fatigue under high-stress conditions. By replacing shorter factory hardware with these 12x1.5mm extended studs, you gain the additional shank length needed to maintain full lug nut engagement on custom offsets.

• Manufacturer Part Number: BXAC-00120
• Thread Size: 12 x 1.5mm
• Quantity: Set of 20 studs
• Construction: High-strength forged material
• Design: Extended length for wheel spacer compatibility

BLOX Racing BXAC-00101 Forged Extended Wheel Studs are engineered for high-performance applications where standard length studs are insufficient. These extended studs provide the additional thread engagement required when running wheel spacers or aftermarket wheels with thicker hub centers. Forged from high-strength alloy steel, they offer the durability and fatigue resistance necessary for both street and track environments.

• Thread Pitch: 12 x 1.5mm
• Quantity: Set of 16 studs
• Material: Forged high-strength alloy steel
• Function: Provides extra length for spacers and thick-hub wheels
• Part Number: BXAC-00101

Ensure safe thread engagement when using wheel spacers or wheels with thicker centers with the BLOX Racing forged extended wheel stud. These studs are manufactured from high-strength forged steel to withstand the stresses of performance driving and racing environments.

• Provides additional length over factory studs for increased thread engagement
• Forged steel construction for superior tensile strength and durability
• Essential for vehicles running wheel spacers or thick-hub aftermarket wheels
• Corrosion-resistant finish for long-lasting performance

Specifications:

• Thread Pitch: 12 x 1.5mm
• Quantity: Sold individually
• Manufacturer Part Number: BXAC-00100

Upgrade the wheel fastening system on your 1992-2002 Mazda RX7 with this high-strength ARP Wheel Stud Kit. Designed to replace the factory wheel studs, these premium fasteners provide superior clamping force and increased safety for street or track applications.

ARP wheel studs are engineered for extreme durability, resisting the shear forces and repeated stress cycles that can fatigue OEM hardware. This kit is ideal for owners looking to enhance the reliability of their wheel mounting or when frequently changing wheels, as studs eliminate the need to align the wheel and bolt it on simultaneously.

• Kit includes: 5 individual wheel studs
• Manufacturer Part Number: 100-7743
• Application: 1992-2002 Mazda RX7

Upgrade your Chevrolet Camaro's wheel fastening system with this high-strength ARP Wheel Stud Kit. Designed for 2010-2017 models, these M14 wheel studs are 1 inch longer than original equipment, providing critical thread engagement when using wheel spacers or aftermarket wheels with thicker hub flanges.

Each ARP wheel stud is precision-machined from premium 8740 chromoly steel and heat-treated for superior strength and durability. The roll-threaded design further enhances fatigue strength and ensures smooth, consistent thread engagement, offering a more secure and reliable solution for track duty or demanding street applications compared to stock studs.

• Fitment: Chevrolet Camaro 2010-2017
• Thread Size: M14
• Length: 1 inch over stock
• Material: 8740 Chromoly Steel
• Design: Press-in style
• Manufacturer Part Number: 100-7737

Upgrade the wheel hardware on your 2015-2017 Chevrolet Camaro with this ARP M14 Wheel Stud Kit. Engineered for performance applications, these high-strength wheel studs are designed to withstand the extreme stresses of track use or demanding street driving, providing a critical safety and durability improvement over factory studs.

This kit features studs that are .500 inches (approximately 12.7mm) longer than the original equipment (OE) studs, ideal for accommodating thicker wheel hubs, aftermarket wheels, or wheel spacers that require additional thread engagement for secure mounting. Each stud is manufactured to ARP's stringent specifications, ensuring superior tensile strength and fatigue resistance.

• Thread Size: M14
• Length: .500in Over Stock
• Manufacturer Part Number: 100-7736
• Application: 2015-2017 Chevrolet Camaro

Replacing worn or inadequate factory studs with ARP hardware provides peace of mind, preventing potential wheel detachment under high load and ensuring a secure connection between your wheels and hubs.

This ARP M14 Wheel Stud Kit provides robust, extended-length wheel studs for Chrysler applications. Engineered to exceed factory specifications, these studs are a critical upgrade when running thicker wheels or wheel spacers that demand greater thread engagement than standard OE studs can offer.

Crafted from a premium heat-treated alloy, ARP wheel studs are designed for superior tensile strength and fatigue resistance, ensuring your wheels remain securely fastened even under demanding conditions. The precision-rolled M14 threads ensure consistent torque readings and optimal clamping force.

• Thread Size: M14
• Length: 1.000 inch longer than stock
• Fitment: Designed for Chrysler front and rear applications
• Material: High-strength, heat-treated alloy for maximum durability
• Installation: Direct replacement for factory press-in studs
• Manufacturer Part Number: 100-7735

Each stud in this kit is meticulously manufactured to ARP's exacting standards, providing the reliability and strength necessary for performance, track, or heavy-duty street use.

Upgrade your Chrysler's wheel mounting system with the ARP M14 Wheel Stud Kit. Engineered for strength and reliability, these extended wheel studs are designed for both front and rear applications.

This kit features studs that are .500 inches longer than factory stock, providing crucial thread engagement for vehicles running thicker wheels, wider tires, or aftermarket wheel spacers. Built to ARP's exacting standards, these studs deliver superior tensile strength compared to OEM hardware, making them ideal for performance driving, track use, or heavy-duty applications where secure wheel retention is paramount.

• Manufacturer: ARP
• Part Number: 100-7734
• Thread Size: M14
• Length: .500in Over Stock
• Application: Chrysler Front/Rear

Upgrade your 2015 Ford Mustang with the ARP M14 1in Over Stock Length Wheel Stud Kit. Designed to replace factory wheel studs, this kit provides additional thread engagement for track use, thicker wheels, or when running wheel spacers. Each stud is manufactured from a premium ARP alloy, heat-treated for optimal strength and durability.

These M14 studs feature an extended length, providing 1 inch more length than the original equipment studs. This ensures sufficient thread engagement even under the most demanding performance conditions, enhancing safety and reliability. A direct fit for the 2015 Ford Mustang, this kit helps prevent stripped threads and potential wheel detachment common with inadequate stud length in performance applications.

• Manufacturer: ARP
• Part Number: 100-7733
• Thread Size: M14
• Length: 1 inch over stock
• Material: High-strength ARP alloy
• Application: Designed for demanding performance and racing use