A sealed air compressor designed to fill up to a 2 gallon air tank. The 6270RC features thermal overload protection to keep the unit from overheating during extended use. Sealed to prevent damage from the elements. Replacement 130 PSI sealed compressor for 6270 air system, HK1, HK2, HK2-1, HK3, HK3-1, HK-4 and HK4-1. Includes remote "Snorkel System" air intake and air filter to extend compressor life.

• 130PSI, Use 2131 Pressure switch and 52155 Safety valve

The Kleinn Model 2121 is a premium sealed pressure switch engineered to automate your onboard air system by keeping tank pressure regulated between 90 PSI and 120 PSI. Optimized for use with the 6260RC air compressor, this heavy-duty switch features a standard 5% PSI variance tolerance and operates on 12-volt ignition power to signal a required SPDT 30-amp relay (Kleinn Model 340), safely turning the compressor on and off automatically. For maximum system protection, it is highly recommended to pair this switch with a 145 PSI safety relief valve (SKU 52145) installed on the air tank; in the event of a pressure switch failure, the safety valve will release a burst of air to alert you to cut power to the compressor, preventing a costly burn-out until the switch can be replaced.

• The use of a relay is recommended (Kleinn model 340)
• Sealed 1/4" NPT Pressure Switch
• Note: 5% tolerance standard
• On: 90 PSI - Off: 120 PSI
• 20 amp max load

Firestone Air compressors are available in standard and heavy duty styles. All Firestone's Air Compressors are direct drive units that contain no oil or belts. This means your compressor can be mounted in any position without effecting the compressor's performance. Firestone air compressor and gauge kits offer the broadest variety of air fill accessories available on the market today.

• Air Compressor

Mounting a compressor in modern day vehicles has become more and more of a challenge as engine bays in modern vehicles have limited room for the installation of aftermarket accessories. To combat this, ARB has introduced a high quality, engineered bracket system to integrate the ARB compressor into your vehicle. The Jeep Wrangler JL Compressor Bracket allows you to install a CKMTA, CKMA, or CKSA (locker only) compressor with optional Air Locker(TM) solenoids, quick connect coupling, switch, manifold kit (CKMTA only) and ARB LINX PRV (pressure regulator) under either the left or right front seat. An additional bracket is included for fitment of the 4L ARB Air Tank to the underside of the vehicle (not suitable for the 2.0L e-torque engine). The under seat location was chosen because it caters to the fitment of a twin compressor and doesnt interfere with cargo space. However, due to space constraints, the air tank is mounted underneath the vehicle. The Jeep Wrangler JL Compressor Bracket includes a comprehensive installation guide showing detailed instructions on fitting the twin ARB Compressor, 4L air tank, Air Locker(TM) manifold kit with switch, and quick connect coupling to the bracket and the bracket to the vehicle.

• An Additional Bracket Is Incl. For Fitment Of The 4L ARB Air Tank
• Bracket Allows You To Install A CKMTA
• CKMA Or CKSA

This Part Fits:

The Air Compressor Mounting Bracket works with CKSA12, CKMA12, and CKMTA12 compressors.

• Air Compressor Mounting Bracket

The ARB Compressor O-Ring Set comes in a package of 8 and can be used with ARB CKMA and CKMP Compressors.

• Replacement O-Rings for CKMA and CKMP compressors
• Air Compressor O-Ring

Designed to work seamlessly with ARB's maximum performance on-board compressors, the Air Locker(TM) Manifold Kit enables easy installation of Air Locker(TM) solenoids to an air source such as a compressor or regular gas bottle. With a working pressure of 150Psi (1030kPa), the manifold kit incorporates multiple ports for use with ARB's Pump Up kit, as well as mounting brackets, and a Teflon stainless steel braided hose designed to cool air supply for tire inflation.

• Works seamlessly with ARB's maximum performance on-board compressors
• Includes mounting brackets and a Teflon stainless steel braided hose
• Easily install Air Locker solenoids to an air source
• Multiple ports for use with ARB's Pump Up kit
• Working pressure of 150Psi (1030kPa)
• Required To Mount Solenoids

Where An ARB CKM Series Compressor Is Mounted On A Vehicle And May Be Submersed During Water Crossings, This Kit Allows Relocation Of The Air Filter To Above The Waterline. This Kit Can Also Be Used Where The Compressor Is Mounted In Hot Or Dusty Environments, To Relocate The Air Filter To A Position That Allows Intake Of Cool, Clean Air.

• Relocates air filter to a position that allows intake of cool, clean air
• CKM Series Compressor Air Filter Relocation Kit
• 1.2m Rubber Hose

A Kit To Allow Mounting Of An ARB US Industrial Standard Quick Connect Hose Coupling Anywhere On A Vehicle. Designed For Use With An ARB Compressor And 07402XX Series Braided Hose. The Kit Includes A Female US Industrial Standard Fitting And A Bracket Which Allows Mounting Of The Fitting In 3 Different Orientations To Suit Every Application.

• Remote Air Line Hose Coupling Kit
• Quick Connect Coupling

Airing and maintaining a proper tire pressure is critical, and now you can get back on the trails more quickly with the durable and user-friendly Pump Up Kit featuring a high-temperature air hose and accessories. The high-quality internal structure of the air hose prevents kinking and unwanted bending during use. The quick-connect air coupling ensures air leaks are a thing of the past and includes a dust cap that keeps dirt and moisture out. Tire inflation is a breeze with the quick-connect inflator chuck that securely grips the tire valve preventing leaks and the need to hold it in place. Simply click it on and let it do the work.

• High-quality internal hose structure prevents kinking and unwanted bending during use
• Additional fittings for inflating air mattresses, toys, and other inflatables
• Manifold Kit Is Recommended For Use With Ckmta12/24 Arb Twin Compressors
• Quick-connect Tire Inflation Chuck features easy on off release handle
• T-piece adapter for connection to CKMA12/24 ARB Single Compressors
• Hose is 23 feet in length allowing for use with larger vehicles
• High-temperature air hose with US standard fittings
• Quick-connect Air Coupling includes a dust cap
• Rated to 150 psi

The high-quality internal structure of the air hose prevents kinking and unwanted bending during use. The 23-foot length works well with larger size vehicles. Pair it with ARB Air Compressors and inflation accessories for airing up your tires.

• High-quality internal structure prevents kinking and unwanted bending during use
• Compact And Collapsible For Easy Storage In Its Heavy-Duty Storage Bag
• Hose is 23 feet in length allowing for use with larger vehicles
• High-temperature air hose with US standard fittings
• Rated to 150 psi

High Flow Stainless Steel Braided PTFE Hose. Use This To Deliver Air From Your ARB Compressor Throughout Your Vehicle.

• High Flow Stainless Steel Braided PTFE Hose

High Flow Stainless Steel Braided PTFE Hose. Use This To Deliver Air From Your ARB Compressor Throughout Your Vehicle.

• High Flow Stainless Steel Braided PTFE Hose

High Flow Stainless Steel Braided PTFE Hose. Use This To Deliver Air From Your ARB Compressor Throughout Your Vehicle.

• High Flow Stainless Steel Braided PTFE Hose

High Flow Stainless Steel Braided PTFE Hose. Use This To Deliver Air From Your ARB Compressor Throughout Your Vehicle.

• High Flow Stainless Steel Braided PTFE Hose

High Flow Stainless Steel Braided PTFE Hose. Use This To Deliver Air From Your ARB Compressor Throughout Your Vehicle.

• High Flow Stainless Steel Braided PTFE Hose
• High Flow Stainless Steel

High Flow Stainless Steel Braided PTFE Hose. Use This To Deliver Air From Your ARB Compressor Throughout Your Vehicle.

• High Flow Stainless Steel Braided PTFE Hose

The Hose Coupling Dust Cap is designed to prevent dust ingress into ARB US Industrial Standard (ISO 6150 B) female fittings with a rubber heat grip. Compatible with fittings 0740111 and 0740112 (not included).

• Prevents dust ingress into ARB US Industrial Standard (ISO 6150 B) female fittings
• Compatible with ARB fittings 0740111 and 0740112 (not included)
• Rubber heat grip

The Hose Coupling is a US Industrial Standard (ISO 6150 B) female to 1/4 x 18 NPT male fitting. The Hose Coupling can be used to connect an ARB high temperature inflation hose to the 1/4 NPT port of an ARB compressor, tank, or manifold kit.

• Connects an ARB high temperature inflation hose to an ARB compressor, tank, or manifold kit
• US Industrial Standard (ISO 6150 B)

ARB Air Systems will supplement the line of air compressors by introducing complete vehicle-specific solutions for enthusiasts looking to equip their vehicles with compressors and accessories. The product range will include items such as air fittings, various lengths of stainless braided PTFE hose, and air chuck mounting solutions. Together, these will provide all the necessary components to fit a complete air compressor system to a 4wd, allowing a vehicle to be outfitted front to back with on-demand air. The Hose Coupling is used to mount a hose coupling to suit the ARB high temperature inflation hose to a surface in or on your vehicle. This fitting can then be connected to your ARB compressor with a 07402XX series hose and a 0740101 or 0740105 fitting where necessary.

• Female to JIC-04 37-degree flare male fitting with M18 panel mount
• US Industrial Standard (ISO 6150 B)
• Remote Air Line Hose Coupling Kit
• Comes in a pack of 1

ARB Air Systems will supplement the line of air compressors by introducing complete vehicle-specific solutions for enthusiasts looking to equip their vehicles with compressors and accessories. The product range will include items such as air fittings, various lengths of stainless braided PTFE hose, and air chuck mounting solutions. Together, these will provide all the necessary components to fit a complete air compressor system to a 4wd, allowing a vehicle to be outfitted front to back with on-demand air. The ARB 90-Degree Elbow Fitting is used to connect a ? NPT port (such as on an ARB CKM series compressor) to a 07402XX series hose where space is limited, and the hose would otherwise have to bend sharply.

• Nickel plated brass for corrosion resistance
• JIC-04 37-degree flare male to ? NPT male
• Air Line 90 Degree Elbow Flare Fitting
• 90-degree elbow fitting
• Comes in a pack of 2

Use This Fitting To Split One 1/4 NPT Port, Such As Found On An ARB Compressor, Tank, Or Manifold Kit, Into Two. This Fitting Is Particularly Useful For Gaining A 1/4 NPT Outlet On An ARB Compressor While Allowing Continued Use Of The Supplied Pressure Switch.

• Tee Piece w/One Male and Two Female Ports
• 3 Way 1/4 in. NPT Air Line Adapter
• Sold in a 2 Pack

ARB Air Line Adapter Fitting; JIC-04; 37 Degree; Flare To 1/8 in. BSP Parallel Fitting w/O-Ring Seal; Spanner Size 14mm; Nickel Plated Brass; 2 Pack;

• JIC-04 37 Degree Flair To 1/8 BSP
• Parallel Fitting w/O-Ring Seal

Use This Fitting To Connect A Male JIC-04 37 Degree Flare Fitting (For Example From A Compressor Outlet) To A Hose Where Space Is Limited And The Hose Must Bend Sharply.

• JIC-04 37 Degree Male To Female Elbow Fitting
• Air Line 90 Degree Elbow Flare Fitting
• Parallel Fitting w/O-Ring Seal
• Sold in a 2 Pack

ARB Air Line Adapter Fitting; Adapter Tee Fitting; 3 Way; JIC-04; 37 Degree; Male Flare Fitting Tee; Nickel Plated Brass; 2 Pack;

• 3-Way Adapter Tee Fitting To Split Air From One Hose Into Two
• Nickel Plated Brass For Corrosion Resistance
• JIC-04 37 Degree Male Flare Fitting Tee
• To Split Air From One Hose Into Two
• Sold in a 2 Pack

ARB Air Line Adapter Fitting; Male Flare Fitting; JIC-04; 37 Degree Male Flare Fitting On Both Ends; Spanner Size 14mm; Nickel Plated Brass; 2 Pack;

• JIC-04 37 Degree Male Flare Fitting On Both Ends
• Male Air Line Flare Fitting
• Sold in a 2 Pack

ARB Air Line Adapter Fitting; 1/4 in. NPT Tapered Thread x JIC-04; 37 Degree Flare Fitting; Spanner Size 14mm; Nickel Plated Brass; 2 Pack;

• Air Line Hose Adapter Fitting
• Sold in a 2 Pack

Offering quick and convenient air pressure adjustment, LoadController (Compact, Dual Path, Heavy Duty) will have your vehicle back on the level in no time, eliminating the need to hunt for a gas station with an air compressor! LoadController allows you to control the pressures of your air springs with the touch of a button, whether parked or on the road. There's no need to worry about changes in load or road conditions -- you can make on-the-go changes from inside the cab. With an exclusive low pressure sensor that automatically activates if pressure drops to an unsafe level, you can be sure that your vehicle and load are protected, no matter what the road throws at you. The easy-to-read, user-friendly pressure gauge features both inflate and deflate buttons, allowing users to users to quickly make changes in air pressure. LoadController is a dual path system, meaning that the air springs can be independently adjusted to different pressures, perfect for uneven loads. Dual path systems help to prevent air transfer between air springs, which provides a more stable cornering situation and significantly less body roll. The mounting pod is customizable to your preferences, with the ability to be mounted in the included mounting cup, flush mounted into the dash, or inserted into any 2 1/8 in. gauge pod. With the included, pre-assembled wiring harness, you'll be able to have your vehicle level and on the road in only a matter of hours. The heavy-duty compressor, perfect for frequent users of the system, mounts easily to the vehicle's frame and the routes the air line directly to the air springs. With the included, fully-illustrated installation manual provides clear instructions to make installation a breeze. As the leader in air suspension products for over 70 years, Air Lift is committed to delivering quality parts that last.

• Dual-path system controls two air springs independently or controls four springs (two at a time)
• Exclusive low pressure sensor automatically adds air if pressure drops below 5 PSI
• Included mounting pod can be customized to unique user needs
• Two-year limited warranty and 60-day, money back guarantee
• Easy to install with fully-illustrated installation manual
• Two-Year Limited Warranty And 60-Day; Money-Back Guarantee
• Included heavy-duty compressor and wiring harness
• Included Heavy Duty Compressor And Wiring Harness
• One-touch control built into the compact gauge
• Compatible with any brand of air springs

This Part Fits:

Offering quick and convenient air pressure adjustment, LoadController (Compact, Single Path, Heavy Duty) will have your vehicle back on the level in no time, eliminating the need to hunt for a gas station with an air compressor. LoadController allows you to control the pressures of your air springs with the touch of a button, whether parked or on the road. There's no need to worry about changes in load or road conditions -- you can make on-the-go changes from inside the cab. With an exclusive low pressure sensor that automatically activates if pressure drops to an unsafe level, you can be sure that your vehicle and load are protected, no matter what the road throws at you. The easy-to-read, user-friendly pressure gauge features both inflate and deflate buttons, allowing users to users to quickly make changes in air pressure. LoadController is a single path system, meaning that both air springs will be adjusted at the same time, to the same air pressure. The mounting pod is customizable to your preferences, with the ability to be mounted in the included mounting cup, flush mounted into the dash, or inserted into any 2 1/8 in. gauge pod. With the included, pre-assembled wiring harness, you'll be able to have your vehicle level and on the road in only a matter of hours. The heavy-duty compressor, perfect for frequent users of the system, mounts easily to the vehicle's frame and the routes the air line directly to the air springs. With the included, fully-illustrated installation manual provides clear instructions to make installation a breeze. As the leader in air suspension products for over 70 years, Air Lift is committed to delivering quality parts that last. To ensure the highest quality, longevity, and customer satisfaction, the system comes with a two-year warranty and a 60-day, no-questions-asked, money-back guarantee -- not to mention the Air Lift reputation for great customer service and technical support.

• Exclusive low pressure sensor automatically adds air if pressure drops below 5 PSI
• Single-path system inflates or deflates air springs to the same pressures
• Included mounting pod can be customized to unique user needs
• Two-year limited warranty and 60-day, money-back guarantee
• Easy to install with fully-illustrated installation manual
• Two-Year Limited Warranty And 60-Day; Money-Back Guarantee
• Included heavy-duty compressor and wiring harness
• Included Heavy Duty Compressor And Wiring Harness
• One-touch control built into the compace gauge
• One-Touch Control Built Into The Compact Gauge
• Compatible with any brand of air springs

This Part Fits: