The Airaid U-Build-It (UBI) Air Intake Tube (MPN 100-500) is a versatile fabrication component designed for builders creating custom, low-restriction air intake systems. This roto-molded tube features a 5-inch outside diameter and is engineered to provide a free-flowing path for induction air, reducing turbulence compared to corrugated factory hoses.

This master tube is designed to be measured and cut to the specific needs of your engine bay. It contains multiple integrated angles in a single piece, allowing you to salvage the exact bends required for your project. Whether you are plumbing a high-horsepower naturally aspirated engine or a custom forced-induction setup, the UBI system provides professional-grade components for a clean installation.

• 5-inch outside diameter (OD) roto-molded construction
• Includes integrated 30, 45, 60, and 90-degree tube bends
• Low-restriction, high-density material for optimal airflow
• Fully customizable cut-to-fit design for unique engine swaps
• Made in the USA
• Manufacturer Part Number: 100-500

The Airaid U-Build-It (UBI) 4-inch Intake Tube is a master component designed for fabricators building high-performance custom induction systems. This one-piece, roto-molded tube provides a low-restriction, free-flowing path for air, featuring an outside diameter (OD) of 4 inches. It is specifically designed to be measured and cut to length, providing the exact segments needed to navigate complex engine bays.

This UBI tube (MPN 100-400) integrates multiple common angles into a single structure, allowing for precise customization during installation. It is an essential solution for engine swaps, off-road builds, or unique vehicle applications where a standard bolt-on intake kit is not available.

• Outside Diameter: 4 inches
• Integrated Bends: 30, 45, 60, and 90 degrees plus straight sections
• Material: Free-flowing roto-molded plastic
• Manufacturing: Made in the USA
• Manufacturer Part Number: 100-400

The Airaid U-Build-It (UBI) Air Intake Tube Set (100-350) is a versatile, one-piece master tube designed for professional-grade custom air intake fabrication. This roto-molded component provides a low-restriction, free-flowing path for engine air, making it an essential solution for engine swaps, custom turbo applications, or unique vehicle builds where direct-fit intake kits are unavailable. The single 3.5-inch outside diameter tube features integrated 30, 45, 60, and 90-degree bends along its length for maximum configuration flexibility.

• 3.5-inch outside diameter (OD) roto-molded master tube
• One-piece construction with integrated 30, 45, 60, and 90-degree bends
• Free-flowing design reduces intake restriction and improves performance
• Durable, heat-resistant material engineered for engine bay environments
• Simple cut-to-fit installation allows for a bespoke intake path
• Manufacturer Part Number: 100-350
• Proudly Made in the USA

To use, simply measure the specific routing required for your engine bay and cut the corresponding bend or straight sections from the master tube. This allows you to create a high-clearance, custom-fit system tailored to your specific performance requirements.

The Airaid U-Build-It (UBI) 3-inch Intake Tube Kit (MPN 100-300) provides a versatile foundation for fabricating a custom air intake system. This roto-molded tube features a low-restriction, free-flowing design with a 3-inch outside diameter, allowing you to maximize airflow in unique engine bay configurations where off-the-shelf kits are not available.

Designed for complete customization, the one-piece master tube contains several common angles in a single casting. You simply measure your required lengths and cut the specific sections needed to route your intake from the throttle body or turbo inlet to the air filter location. The durable roto-molded material resists heat soak more effectively than metal tubing, helping maintain lower intake air temperatures.

• Tube Diameter: 3-inch outside diameter (OD)
• Included Bends: 30, 45, 60, and 90-degree tube sections
• Material: High-density roto-molded plastic for heat resistance and durability
• Manufacturing: Proudly Made in the USA
• Part Number: 100-300

Engineered for fabricators and builders, the AEM 2-007-90 is a high-performance 4.0-inch diameter intake tube designed for custom turbocharger ducting and air intake systems. This 90-degree bend is constructed from premium 6063 aluminum alloy, providing a balance of weldability and structural integrity under high heat and stress.

The tubing features a precise mandrel-bent profile to ensure uniform wall thickness and smooth internal airflow, eliminating the turbulence often found in crush-bent alternatives. Whether you are building a custom intercooler pipe or a high-flow cold air intake, this tube is designed to be cut, spliced, or welded to meet your specific plumbing requirements.

• Material: High-grade 6063 aluminum alloy
• Outside Diameter: 4.0 inches (102mm)
• Bend Angle: 90 degrees
• Construction: Mandrel-bent for smooth, uniform airflow
• Applications: Custom air intakes, turbo induction, and intercooler piping
• Manufacturer Part Number: 2-007-90

AEM 6063 aluminum intake tubes provide a professional-grade foundation for builders and fabricators constructing custom turbocharger plumbing or air induction systems. This 2.5-inch diameter tube features a precise 90-degree mandrel bend to ensure uniform airflow and consistent internal volume throughout the curve.

Engineered to withstand the high heat and stress of performance engine bays, this universal component is ready to be cut, spliced, or welded to meet specific layout requirements. The 6063 alloy offers excellent weldability and corrosion resistance for long-term durability in custom applications.

• Material: High-quality 6063 aluminum alloy
• Diameter: 2.5 inches
• Bend Angle: 90 degrees
• Construction: Precision mandrel-bent for smooth, uniform airflow
• Customization: Weldable, cuttable, and spliceable for custom fabrication
• Manufacturer Part Number: 2-001-90

Fits 2015-2021 Subaru WRX models.

The Cobb MAF Extension Harness provides a clean, reliable solution for relocating your Mass Air Flow sensor. This is typically required when installing aftermarket intake systems or intercooler piping that alters the factory MAF sensor location. By using a plug-and-play harness, you eliminate the need for cutting, splicing, or pinning your factory engine loom, maintaining the integrity of your vehicle's electrical system.

• Direct Fit: Designed specifically for the 2015-2021 Subaru WRX chassis.
• Plug-and-Play: Features OEM-style connectors for a secure, moisture-resistant connection.
• Durable Construction: Built with automotive-grade wiring to withstand engine bay heat and vibration.
• Simple Installation: Reversible design allows for easy removal if the vehicle is returned to stock.
• Manufacturer Part Number: SUB-ELE-007

Fits 2017-2024 Ford F-150 and Raptor models.

The Cobb Intake Scoop Bracket (MPN 8G4625) provides a robust and secure mounting solution for your vehicle's intake system. Engineered to maintain proper alignment of the air intake scoop, this bracket ensures that the induction system remains stable even under high-load or off-road driving conditions. By replacing or reinforcing the factory mounting hardware, it prevents unwanted movement and vibration that can lead to hardware fatigue or air leaks.

• Direct fit for 2017-2024 Ford F-150 and Raptor
• Engineered for high-strength durability and precise fitment
• Secures intake scoop to maintain consistent airflow geometry
• Straightforward installation using existing factory mounting points
• Manufacturer Part Number: 8G4625

Fits 2013-2015 Ford Focus ST.

The Cobb Sound Symposer Delete provides a clean and effective way to remove the bulky factory symposer system on your Focus ST. Designed to eliminate the artificial engine noise piped into the cabin, this kit replaces the OE tubing with a low-profile block-off plate, resulting in a cleaner engine bay and a more natural acoustic experience from your intake and exhaust modifications.

• Eliminates artificial cabin drone and factory symposer plumbing
• Precision-machined block-off plate for a leak-free seal
• Durable Stealth Black finish for an OEM+ look
• Clears engine bay space for easier maintenance and cleaner aesthetics
• Direct-fit installation to factory mounting points
• Manufacturer Part Number: 891100

Maintain peak performance and filtration efficiency with the COBB SF Intake Replacement Filter (7V2105). This high-flow air filter is engineered as a direct replacement for the filter element provided in COBB SF Intake systems, ensuring your engine continues to receive clean, turbulent-free air for optimal power delivery.

Fits select Volkswagen GTI (MK6/MK7/MK7.5), Mazda Mazdaspeed3, and Mitsubishi Lancer Evolution X models equipped with the COBB SF Intake system.

• Direct Fit: Designed specifically for COBB SF Intake systems to ensure a perfect seal and easy installation.
• Dual-Cone Design: Increases surface area compared to standard filters, allowing for higher flow rates while maintaining strict filtration standards.
• Washable Media: Features a pre-oiled, woven cotton gauze media that is washable and reusable for the life of the vehicle.
• Premium Construction: Durable molded rubber end caps and a 3.0-inch (76mm) ID flange provide a secure, vibration-resistant connection.
• Manufacturer Part Number: 7V2105

Fits 2015-2021 Subaru WRX models equipped with the COBB Big SF Intake system.

The COBB Big SF Intake System Airbox Bracket Kit provides the essential mounting components required to securely install and stabilize the Big SF airbox within the engine bay. This kit is engineered to maintain proper alignment and provide vibration isolation, ensuring your intake system stays firmly in place during spirited driving. As a direct replacement for lost or damaged hardware from the original intake kit, these components offer the precise fitment needed for a professional installation.

• Designed specifically for use with COBB Big SF Intake System (Part Number 745110)
• Includes vehicle-specific brackets and necessary mounting hardware
• Built to withstand engine bay heat and vibration
• Manufacturer Part Number: 745110-HW2

Maintain the performance and structural integrity of your Subaru intake tract with the Cobb Big SF Intake System Hardware Kit. This comprehensive kit is designed specifically as a direct replacement for the hardware found in the Cobb Big SF Intake System (MPN 745110), ensuring a secure, leak-free seal for your induction system.

Whether you are refreshing an older installation or replacing lost components during a service, this hardware kit provides the exact specifications required for a factory-level fit and finish. Using genuine Cobb replacement hardware prevents vacuum leaks and ensures the intake pipe remains properly supported under high-vibration and heat-cycled engine bay conditions.

• Specifically engineered for the Subaru Cobb Big SF Intake System (745110)
• Includes necessary fasteners and hardware for a complete installation or refresh
• High-quality materials designed to withstand extreme engine bay heat and vibrations
• Direct replacement for lost or damaged original hardware
• Manufacturer Part Number: 745110-HW

The Cobb SF Intake System Hardware Kit (MPN 715100-HW) provides the essential mounting components and fasteners required to properly install or refresh your SF Intake on a Subaru. Designed as a direct replacement for lost or corroded hardware, this kit ensures your intake system remains securely anchored and properly aligned for optimal performance.

• Genuine Cobb replacement hardware for the SF Intake System
• Restores factory-spec mounting and secure fitment
• Ideal for refreshing old installs or reinstalling used intake kits
• High-quality fasteners for long-term durability
• Manufacturer Part Number: 715100-HW

Maintain the integrity of your induction system with the Cobb SF Intake System Hardware Kit. Specifically engineered to replace lost or damaged fasteners, this kit ensures your SF Intake is securely mounted to factory specifications, preventing vibration and potential air leaks.

Whether you are reinstalling a used intake or refreshing your current setup, using the correct hardware is critical for proper component alignment and long-term durability. This kit includes the specific bolts, washers, and fasteners required for a complete installation of the SF series intake system.

• Genuine Cobb Tuning replacement hardware kit
• Designed specifically for the Subaru SF Intake System
• Ensures secure mounting and proper component fitment
• Includes necessary bolts and washers for installation
• Manufacturer Part Number: 712100-HW

The Cobb Stealth Black Post MAF Hose is designed to replace the restrictive, corrugated factory rubber hose between the MAF sensor and the turbo inlet. By eliminating the accordion-style walls of the OE unit, this hose provides a smoother internal path, reducing air turbulence and improving intake efficiency.

Constructed from high-quality multi-ply silicone, this upgrade is built to withstand high under-hood temperatures and resist collapsing under vacuum. The Stealth Black finish offers a subtle, professional appearance that integrates seamlessly into the engine bay while providing a significant durability upgrade over aging factory rubber.

• Direct replacement for the factory corrugated post-MAF hose
• Smooth internal bore improves airflow characteristics
• High-temperature multi-ply silicone construction
• Stealth Black finish for an OEM-plus aesthetic
• Manufacturer Part Number: 712010-BK

Fits 2015-2020 Subaru STI models.

The Cobb 3in Stainless Steel Cat-Back Exhaust Hardware Kit provides the essential components needed to maintain or install your performance exhaust system. This kit (MPN: 515132-HW) is specifically designed to work with 3-inch diameter stainless steel cat-back systems, ensuring a precise fit and a leak-free seal. Replacing old, corroded hardware is critical for maintaining exhaust velocity and preventing unwanted noise or fumes.

• Complete hardware set specifically for 3-inch cat-back exhaust systems
• Durable stainless steel construction for superior corrosion resistance
• Includes all necessary high-temperature gaskets and fasteners
• Direct replacement hardware for 2015-2020 Subaru STI applications
• Manufacturer Part Number: 515132-HW

Fits 2013-2020 Scion FR-S, Subaru BRZ, and Toyota 86 (2.0L).

The aFe Power Takeda Torque Booster Tube is a high-performance upgrade designed to replace the restrictive factory "accordion-style" intake tube. By providing a smooth interior surface, this tube reduces airflow turbulence to improve horsepower, torque, and throttle response. It is constructed from premium 3-ply reinforced silicone, making it highly resistant to cracking and high-temperature engine bay conditions compared to standard rubber.

This torque booster tube is engineered for a precise, bolt-on fit to the original equipment air intake system. The design includes a connection for the OE crankcase vent hose and requires no cutting or drilling for installation. For added durability and a secure seal, the kit includes heavy-duty stainless steel clamps.

• 3-ply reinforced silicone construction resists heat and cracking
• Smooth internal bore reduces turbulence for improved airflow
• Direct replacement for factory intake tube (MPN: TT-2016B)
• Connects to the OE crankcase vent hose
• Includes stainless steel clamps for strength and durability
• No cutting or drilling required on OEM parts

Fits select 2007-2015 Infiniti G35, G37, and Q60 models.

Specifically engineered for the Takeda Stage-2 cold air intake system (TA-3016P), this splash shield provides an essential layer of protection for your 360-degree radial flow Pro DRY S air filter. It is designed to prevent the intake from ingesting road spray and water during inclement weather, safeguarding your engine while maintaining the high-volume airflow required for optimal performance.

• Engineered Protection: Shields the air filter from direct water contact and road debris to prevent ingestion.
• Maintains Performance: Features precision-cut directional slots to ensure maximum airflow and responsive throttle feel.
• Durable Construction: Fabricated from high-quality materials with a satin black powder-coated finish for superior corrosion resistance.
• Easy Installation: Designed for a straightforward fit as a component of the Takeda Stage-2 intake system.
• Manufacturer Part Number: TA-3016S
• Warranty: 2-Year Limited Warranty

Fits select 2019-2026 Buick, Cadillac, Chevrolet, and GMC vehicles.

The aFe POWER MAF harness extension provides a seamless, plug-and-play solution for relocating your factory Mass Air Flow (MAF) sensor. This extension is specifically designed to streamline the installation of aFe POWER intake systems or custom modifications where sensor repositioning is required. By using this 6-inch lead, you avoid the risks and labor associated with cutting, splicing, or re-pinning the factory engine wiring harness.

• Length: 6-inch extension for versatile sensor placement.
• OEM Integration: Features factory-style connectors for a secure, weatherproof connection.
• Premium Construction: Assembled with high-quality wiring and protective looming to withstand engine bay heat and vibration.
• Sensor Compatibility: Fits GM and ACDelco MAF sensor part numbers 12671620 and 12714453.
• Direct Fit: Direct replacement for aFe POWER part number 05-70047.
• Manufacturer Part Number: F05-70047

Fits 2008-2010 Ford F-250 and F-350 Super Duty trucks.

The aFe POWER MagnumFORCE Intake System Spare Soft Parts Kit (59-81262) is specifically engineered to maintain the performance and reliability of your cold air intake. Over time, heat and engine movement can stress intake components; this kit provides the high-quality soft parts needed to restore a leak-free seal between the intake housing, tube, and engine.

• Vibration Dampening: The included coupler hoses are designed to accommodate engine expansion, movement, and chassis vibration, preventing cracks or air leaks.
• Precise Compatibility: This kit is designed exclusively for aFe POWER intake systems with SKUs ending in -81262.
• Supported Intake Systems: Fits aFe POWER intake part numbers 51-81262, 51-81262-E, 54-81262, and 75-81262-1.
• Manufacturer Part Number: 59-81262

Regularly replacing worn couplers and seals ensures your engine continues to receive clean, filtered air while maintaining the optimal air-fuel ratios required for heavy-duty performance.

Keep your performance intake system in peak condition with the aFe Power MagnumFORCE Cold Air Intake System Spare Parts Kit. This kit is specifically designed to maintain or refresh aFe intake systems 51-81174 and 54-81174 for 2007-2020 Toyota Tundra and 2008-2014 Toyota Sequoia models equipped with the V8-5.7L engine.

Using genuine aFe Power replacement components ensures proper fitment and restores the sealing integrity of your intake system, preventing unfiltered air from entering the engine. Whether you are replacing worn hardware or refreshing the installation after a deep clean, this spare parts kit provides the necessary items to maintain factory-level tolerances and performance.

• Fits aFe Power Intake Systems 51-81174 and 54-81174
• Designed for V8-5.7L engine configurations
• Maintains system integrity and filtration efficiency
• Manufacturer Part Number: 59-81174

Vehicle Fitment:
Fits select 2007-2020 Toyota Tundra and 2008-2014 Toyota Sequoia (V8-5.7L).

Fits select 2003-2011 Toyota 4Runner, FJ Cruiser, and Tacoma models. This aFe POWER MagnumFORCE spare parts kit is engineered to maintain or refresh your existing intake system with high-quality replacement components. Specifically designed as a service solution for aFe POWER intake systems, this kit ensures your intake continues to seal correctly and function at peak efficiency.

• Direct replacement spare parts kit for aFe POWER Intake PNs: 51-81162 and 54-81162
• Restores intake system integrity to manufacturer specifications
• Includes necessary hardware and components for the 81162 series air boxes
• Manufacturer Part Number: 59-81162

Fits select 2006-2007 Chevrolet Silverado and GMC Sierra 2500 HD/3500 models (including Classic).

Keep your intake system performing at peak efficiency with the aFe POWER MagnumFORCE Spare Parts Kit. Specifically designed for aFe POWER MagnumFORCE Cold Air Intake systems with SKUs ending in -80882 (51-80882, 51-80882-E, 54-80882, and 75-80882-0), this "soft parts" kit provides the high-quality replacement components needed to ensure a leak-free, durable connection between your intake housing and the engine.

The kit features premium silicone couplers that offer superior heat resistance and flexibility compared to standard rubber. Also included are stainless steel worm gear clamps, providing corrosion-resistant durability and high clamping force to prevent air leaks. A specialized foam gasket for the Mass Air Flow (MAF) sensor ensures a precise, airtight seal for accurate sensor readings.

• Application: Fits aFe POWER intakes 51-80882, 51-80882-E, 54-80882, and 75-80882-0
• Components: Premium silicone couplers and MAF sensor foam gasket
• Hardware: Corrosion-resistant stainless steel worm gear clamps
• Durability: Designed to withstand high engine bay temperatures and vibrations
• Manufacturer Part Number: 59-80882

Fits 2001-2004 Chevrolet Silverado and GMC Sierra 2500 HD/3500 (V8-6.6L/8.1L). This genuine aFe Power MagnumFORCE spare parts kit is designed to refresh or repair the "soft" components of your existing cold air intake system, ensuring airtight seals and proper vibration isolation.

This kit is specifically engineered for use with aFe Power intake systems with part numbers ending in -80782, including 51-80782, 51-80782-E, 54-80782, and 75-80782-0. It features high-quality silicone couplings and durable gaskets to maintain the efficiency of your intake tract.

• Resonator Plug: Used to cap off the inlet tube if no resonator is present.
• Silicone Couplings: Flexible connectors that allow for engine movement and vibration without compromising the seal.
• Coupler Hose: Designed for thermal expansion and secure fitment.
• MAF Sensor Gasket: Precision-cut foam gasket for the Mass Air Flow sensor to prevent unfiltered air leaks.
• Manufacturer Part Number: 59-80782

Fits 2007-2010 Chevrolet Silverado and GMC Sierra 2500 HD/3500 HD trucks equipped with select aFe POWER intake systems.

Maintain the performance and filtration integrity of your Magnum FORCE cold air intake system with this genuine aFe POWER soft spare parts kit. Over time, engine heat and vibration can degrade intake couplers and seals. This kit provides the specific replacement soft components required to ensure a secure, airtight seal, preventing unfiltered air from bypassing the filter and maintaining optimal intake velocity.

• Targeted Maintenance: Specifically designed for aFe POWER intake systems ending in -11332.
• Confirmed Compatibility: Fits intake part numbers 51-11332, 51-11332-E, 54-11332, and 75-11332.
• Restores Seals: Replaces worn couplers and soft components to eliminate potential vacuum leaks.
• Exact Fitment: Manufactured to the same tolerances and material specifications as the original kit components.
• Manufacturer Part Number: 59-11332

Whether you are performing routine maintenance or reinstalling your intake system on a 2007-2010 GM heavy-duty pickup, this kit ensures a factory-grade seal for your performance hardware.

Fits 2008-2010 Ford F-250 and F-350 Super Duty.

This aFe Power MagnumFORCE Spare Parts AIS Soft Parts Kit is engineered to refresh and maintain the seals and couplers on your high-performance intake system. Over time, heat cycles and engine vibration can degrade rubber and silicone components; this kit provides the direct-replacement soft parts necessary to ensure a leak-free seal and optimal airflow for your cold air intake.

• Designed specifically for aFe intake systems with SKUs ending in -11262
• Direct replacement for part numbers: 51-11262, 54-11262, and 75-11262
• Maintains the airtight integrity of the intake air system (AIS)
• Constructed from high-quality materials to withstand under-hood temperatures
• Genuine aFe POWER replacement component (MPN: 59-11262)

Fits 2006-2007 Chevrolet Silverado and GMC Sierra 2500 HD/3500 (including Classic models).

Maintenance and proper sealing are critical for performance intake systems. The aFe POWER Magnum FORCE Spare Soft Parts Kit (MPN: 59-10882) provides the essential replacement components required to refresh your air intake system and maintain an airtight seal. This kit is specifically designed for aFe intake systems with SKUs ending in -10882, ensuring factory-level fitment and reliable filtration path integrity.

• Genuine Replacement: Direct service kit for aFe Magnum FORCE Cold Air Intake systems.
• Compatibility: Specifically designed to fit aFe intake part numbers 51-80882, 51-80882-E, 54-80882, and 75-10882.
• System Integrity: Replaces worn or aged soft components to prevent unfiltered air from bypassing the intake tract.

Vehicle Fitment:

• 2006-2007 Chevrolet Silverado 2500 HD / 3500 (including Classic)
• 2006-2007 GMC Sierra 2500 HD / 3500 (including Classic)

Fits select 2001-2004 Chevrolet Silverado and GMC Sierra 2500 HD/3500 trucks. This genuine aFe POWER Magnum FORCE Spare Soft Parts Kit (MPN: 59-10782) is designed specifically to maintain or refresh your existing cold air intake system. Soft parts such as couplers and trim are critical for maintaining a secure, airtight seal, ensuring your intake continues to draw cold air and prevent unfiltered air from entering the engine.

This kit is the direct replacement for the soft components used in several aFe Magnum FORCE intake systems. Whether you are performing routine maintenance or replacing worn components after years of service, these parts are engineered to meet the original equipment tolerances for a precise fit.

• Manufacturer Part Number: 59-10782
• Compatible Intake Systems: 51-10782, 51-10782-E, 54-10782, and 75-10782
• Service Type: Spare Soft Parts (Couplers, Trim, or Hardware)

Vehicle Fitment:

Fits 2004-2005 Chevrolet Silverado 2500 HD/3500 and GMC Sierra 2500 HD/3500.

Maintain the efficiency and sealing integrity of your aFe POWER Magnum FORCE cold air intake system with this genuine AIS (Air Intake System) Soft Parts Kit. Over time, the flexible components and seals of an intake system can degrade due to heat and engine bay vibrations. This kit provides the exact replacement soft parts required to restore a factory-tight seal and prevent unfiltered air from entering your engine.

• Compatibility: Engineered specifically for aFe POWER Magnum FORCE intake systems with part numbers 51-10612, 54-10612, and 75-10612.
• Maintenance Essential: Replaces worn or hardened seals and soft components to ensure maximum airflow velocity and filtration.
• Durable Construction: Built to the same exacting standards as the original intake components for a precise fit and long service life.
• Manufacturer Part Number: 59-10612

Fits select 1999-2003 Ford F-250/F-350 Super Duty and Excursion models. This aFe POWER Magnum FORCE Spare Parts Kit (AIS Soft Parts) is engineered specifically to refresh and maintain the sealing components of your existing cold air intake system.

Whether you are performing routine maintenance or restoring an older installation, this kit provides the essential soft components required to ensure a proper seal and secure connection for your intake housing and ducting. This kit is designed for use only with specific aFe POWER intake systems and ensures a factory-spec fit without the need for modification.

• Direct Compatibility: Engineered specifically for aFe POWER Magnum FORCE Intake PNs: 51-10192, 54-10192, and 75-10192.
• Service Grade Components: High-quality soft parts designed to withstand engine bay heat and vibration.
• Performance Integrity: Maintains the airtight seal necessary for optimal air filtration and intake velocity.
• MPN: 59-10192