Fits 2003-2006 Nissan 350Z and 2003-2007 Infiniti G35 models.

Smooth out your intake tract with the Mishimoto induction hose kit. This premium upgrade replaces the restrictive factory rubber hose with high-grade 5-ply silicone construction, designed to withstand higher engine bay temperatures and resist degradation. Integrated steel reinforcement rings provide structural integrity, preventing the hose from collapsing under heavy load or vacuum conditions.

Installation is a straightforward bolt-on process that can be completed in under 30 minutes with basic tools. This kit is fully compatible with either the factory airbox or the Mishimoto Performance Air Intake and does not require an ECU retune. Dyno testing has shown performance gains of up to 4 whp and 6 wtq over the stock induction hose.

• Direct fit for 2003-2007 Nissan 350Z and Infiniti G35
• 5-ply silicone construction for superior heat and pressure resistance
• Internal steel reinforcement rings prevent hose collapse under vacuum
• Compatible with factory or Mishimoto intake systems
• No ECU tuning required for performance gains
• Includes Mishimoto Lifetime Warranty
• Manufacturer Part Number: MMHOSE-350Z-03IHBK

Fits the 1990-1996 Nissan 300ZX Turbo.

Replace your brittle, aging factory rubber with the Mishimoto Silicone Turbo Induction Hose Kit. These hoses are engineered for high-performance durability, providing a direct OEM replacement fit that eliminates potential boost leaks caused by dry-rotted induction lines. Constructed from high-grade silicone and reinforced with heat-resistant embedded fibers, this kit offers superior pressure tolerance and effective heat reduction in the engine bay.

• Direct fit for 1990-1996 Nissan 300ZX Turbo
• Dual-layer construction combining high-grade silicone and embedded reinforcement fibers
• Maximum temperature rating of 330°F (165°C)
• Enhanced pressure tolerance for reliable performance under boost
• Replaces restrictive or leaking factory induction hoses
• Manufacturer Part Number: MMHOSE-300ZX-90THBK

Fits select 2019-2024 Ram 2500 and 3500 models (6.7L Cummins Diesel).

Standard silicone boots can often degrade over time due to exposure to oil, fuel, and extreme boost pressures, leading to performance-robbing leaks or complete blowouts. The Mishimoto Factory-Fit Boot Kit for the 2019-2024 Ram 6.7L Cummins is engineered to withstand these harsh conditions. These boots utilize Mishimoto’s proprietary DuraCore(TM) technology, a synthetic inner lining that offers superior resistance to heat, pressure, fuel, and oil compared to standard silicone construction.

To ensure a secure, leak-free connection even under high boost, this kit includes Mishimoto Constant Tension T-bolt Clamps. These clamps provide consistent holding power through heat cycles, preventing the boots from slipping or losing their seal. Designed as a direct-fit replacement for the OE components, this kit maintains factory fitment while providing the durability required for high-output diesel applications.

• Direct fit for 2019-2024 Ram 2500/3500 6.7L Cummins
• DuraCore(TM) technology provides superior resistance to heat, pressure, fuel, and oil
• High-grade silicone construction with multiple layers of reinforcement
• Includes Mishimoto Constant Tension T-bolt Clamps for consistent clamping force
• Prevents boost leaks and boot blowouts
• Mishimoto Lifetime Warranty
• Manufacturer Part Number: MMBK-RAM-19

Fits 2017-2019 Ford F-250 and F-350 Super Duty diesel models.

This K&N Air Filter Foam Insert Block is engineered as a direct replacement for the factory foam block found in the intake systems of Ford Super Duty diesel trucks. Designed specifically for diesel (DSL) applications, this insert ensures proper fitment and function within the OEM housing. Every unit is pre-cut to precise manufacturer specifications, allowing for a drop-in installation without the need for additional trimming or modification.

• Manufacturer Part Number: 85-2003
• Compatibility: Diesel (DSL) engines only
• Construction: Pre-cut foam ready for immediate installation
• System Role: Direct replacement for the OEM intake foam block
• Series: E-0644

The K&N 85-1120 Air Filter Vent Kit provides a professional solution for plumbing smog tubes, crankcase vents, and valve cover breathers into an air filter assembly. Designed for universal applications, this kit is ideal for custom intake builds or engine configurations requiring external ventilation routing.

This 90-degree elbow configuration is manufactured from durable white plastic and requires drilling a mounting hole in the air filter base or valve cover for installation. Each kit includes the necessary gasket and hardware to ensure a secure, leak-free seal.

• Product Type: Air Filter Vent Kit
• MPN: 85-1120
• Configuration: 90-Degree Elbow
• Flange Size: 0.50in (13mm)
• Dimensions: 1.75in Height x 1.75in Length
• Material: High-strength white plastic
• Includes: Mounting hardware and gasket

The K&N 85-1060 Universal Plenum is engineered to streamline airflow into your engine, providing a clean and efficient path for induction. While designed for universal applications, this plenum is an ideal solution for Weber DGV carburetors, ensuring smooth air delivery for improved throttle response and performance.

Constructed with a durable black finish, this plenum is built to withstand engine bay heat while maintaining a professional aesthetic. It serves as a critical component for custom intake setups where space and airflow management are paramount.

• Manufacturer Part Number: 85-1060
• Dimensions: 11.89in Length x 9in Diameter x 4.75in Height
• Application: Universal; compatible with Weber DGV carburetors and similar intake configurations
• Finish: Black
• Function: Promotes smooth, laminar airflow into the induction system

The K&N 81-0221 In-Line Fuel Filter is engineered for high-demand racing environments, providing reliable filtration for critical fuel system components. This compact filter is designed for versatility, making it suitable for use with gasoline, various oils, and racing fuels including methanol.

Built with a sintered porous bronze and stainless steel mesh media, the 81-0221 offers durable filtration in a small footprint. It features a 1/4-inch flange diameter for easy integration into custom fuel plumbing. The compact 0.99-inch body diameter and 2.15-inch overall length allow for installation in tight engine bays or chassis locations where space is limited.

• Manufacturer Part Number: 81-0221
• Flange Diameter: 1/4 inch
• Outer Diameter: 0.99 inch (1 inch)
• Overall Length: 2.15 inches (2-1/8 inch)
• Filter Material: Sintered porous bronze with stainless steel mesh
• Application: Racing systems; compatible with gasoline, methanol, and oil

The K&N 58-1191 Custom Velocity Stack Assembly is a high-performance air intake solution designed for custom engine applications requiring maximum induction efficiency. This complete assembly features a mirror-finished stainless steel top and base, housing a 9-inch Filtercharger air filter element. The 360-degree open design provides unrestricted airflow while the integrated velocity stack base smooths intake turbulence for improved engine responsiveness.

• Mounting Flange: 5-1/8 inch (5.125") neck diameter fits standard performance carburetors and throttle bodies.
• Construction: Corrosion-resistant stainless steel top and base with a high-luster mirror finish.
• Filter Element: 9-inch red Filtercharger media; washable and reusable for the life of the vehicle.
• Dimensions: 11-inch overall diameter with a 10-inch total assembly height.
• MPN: 58-1191 includes the velocity stack base, air filter, and hardware.

The K&N 21512-1 Universal Air Filter Adapter is a precision-engineered component designed to expand your intake configuration possibilities. This adapter allows for the secure mounting of a high-flow air filter with a 6-inch flange onto a 3.5-inch intake tube or coupler, making it an essential piece for custom forced induction setups or cold air intake fabrication where mismatched diameters occur.

• Adapts a 6-inch flange air filter to a 3.5-inch intake tube
• Durable construction maintains structural integrity under high engine bay temperatures
• Ensures a leak-free seal for consistent airflow and accurate sensor readings
• Manufacturer Part Number: 21512-1
• Backed by K&N's limited warranty

The K&N Custom Racing Assembly carbon fiber air box base is engineered for high-stakes racing applications where every gram of weight and every measure of structural integrity matters. This large solid base serves as a premium foundation for custom air box configurations, utilizing advanced carbon fiber composite technology to provide a superior stiffness-to-weight ratio that outperforms traditional fiberglass components.

• Constructed from high-grade carbon fiber composites for maximum rigidity and weight savings.
• Designed specifically for use within the K&N Custom Racing Assembly series.
• Large solid base configuration allows for custom tailoring to your specific intake requirements.
• Provides a professional, race-ready finish with the durability needed for competitive environments.
• Manufacturer Part Number: 100-8590
• Includes a K&N One Year Limited Warranty.

Fits 1989-2002 Nissan Skyline GT-R R32, R33, and R34 models equipped with the RB26DETT engine.

The HKS Airflow Less Adaptor (1599-SN003) is an essential component for high-performance builds converting to a Speed Density or MAP-based engine management system. In a factory RB26 configuration, the mass air flow (MAF) sensors can create physical intake restrictions as boost levels and power demands increase. This HKS adapter replaces the factory sensor housing with a straight-through design, eliminating that bottleneck and allowing for smoother, unrestricted airflow to the turbochargers.

Constructed to precise tolerances, this adapter ensures a secure, leak-free connection between the air intake and the turbocharger inlet pipes. It is specifically designed for use with standalone ECUs, such as the HKS F-CON V Pro, which calculate engine load without the need for a physical airflow meter.

• Manufacturer Part Number: 1599-SN003
• Replaces factory 80mm MAF sensor (OE 22680-05U00)
• Engineered for RB26DETT twin-turbo applications
• Cast construction for durability and consistent fitment
• Direct bolt-on flange design to simplify Speed Density conversion

This Fleece Performance universal molded rubber elbow is a professional-grade solution for custom 5-inch air intake systems and turbocharger plumbing. Engineered to withstand the rigors of high-airflow environments, this elbow provides the flexibility needed for unique routings while maintaining structural integrity under vacuum or low pressure.

• Diameter: 5.0 inches (Inlet/Outlet)
• Material: Heavy-duty molded rubber for durability and vibration isolation
• Hardware Included: Two high-quality stainless steel band clamps
• Configuration: Universal 90-degree bend for versatile installation
• Manufacturer Part Number: FPE-UNV-INTAKE-RUBBER-5

Whether you are building a custom cold air intake or rerouting a turbo inlet, this molded rubber component ensures a secure, leak-free connection. The included stainless steel clamps provide consistent tension to prevent slippage even in high-vibration applications.

Fits 2017-2019 Chevrolet Silverado and GMC Sierra 2500/3500 HD (6.6L L5P Duramax).

The Fleece Performance High Flow Intake Horn is a direct-replacement performance upgrade for the restrictive factory intake runner. While the stock plastic component features a narrow 2.4-inch diameter, this Fleece Performance version utilizes a larger 3.3-inch cast aluminum bore to significantly reduce intake restriction and improve turbocharger efficiency. This design optimization can result in gains of up to 10 additional rear-wheel horsepower (RWHP).

Engineered for a seamless installation, this intake horn bolts directly to the factory mounting points and requires no aftermarket tuning or modifications to the vehicle. The kit includes a billet aluminum fitting for a secure PCV connection and a square-cut O-ring to ensure a leak-free seal under boost.

• Replaces restrictive 2.4-inch plastic factory intake runner
• Large 3.3-inch diameter cast aluminum construction
• Gains up to 10 RWHP without additional tuning
• Direct bolt-on fitment using factory mounting points
• Includes billet aluminum PCV fitting and mounting hardware
• Manufacturer Part Number: FPE-L5P-INTAKEHORN

Kit Contents: Cast aluminum intake horn, square-cut O-ring, billet aluminum PCV fitting, and M8x1.25 mounting hardware.

Fits select 2001-2004 Chevrolet Silverado and GMC Sierra 2500 HD/3500 models (6.6L LB7 Duramax).

Maximize your LB7's airflow with the Fleece Performance High Flow Intake Horn. This cast aluminum upgrade replaces the restrictive factory inlet, reducing turbulence and allowing your turbocharger to breathe more efficiently. In back-to-back testing, this simple bolt-on modification delivered a proven increase of 15 horsepower, making it one of the most cost-effective performance upgrades available for the early Duramax platform.

Built for durability and precision fitment, this kit includes a new mounting gasket to ensure a leak-free seal against the turbocharger inlet. It is designed to work with factory mounting points for a straightforward installation process.

• Manufacturer Part Number: FPE-INTAKEHORN
• Material: Cast aluminum
• Horsepower Gain: +15 hp (dyno verified)
• Engine Compatibility: 6.6L LB7 Duramax
• Includes: High flow intake horn and replacement gasket

Optimized for high-performance applications, this BD Diesel high-flow air filter is designed specifically for use with Scorpion Turbo Kits. The washable, cone-style design ensures long-term durability and consistent airflow, replacing standard filters with a reusable unit that maintains engine protection while reducing restriction.

• Construction: Washable and reusable cone-style media for extended service life
• Compatibility: Specifically engineered to fit with BD Diesel Scorpion Turbo Kits
• Inlet Diameter: 4 inches
• Overall Height: 9.7 inches
• Base Diameter: 8 inches
• Top Diameter: 7 inches
• Manufacturer Part Number: 1401604

Fits 1994-1995 Ford Mustang GT, GTS, and SVT Cobra (5.0L).

Maintain a proper seal and prevent vacuum or coolant leaks with the BBK Performance Throttle Body Gasket Kit. Over time, OEM gaskets can deteriorate, dry out, or crack, leading to erratic idling and other driveability issues. This premium gasket set is engineered as a direct replacement for worn seals and should be replaced every time the throttle body is removed for cleaning, repair, or service.

These are the same high-quality gaskets included with BBK Power Plus series throttle bodies. Manufactured in the USA from premium materials, they are designed to resist blow-outs and provide a reliable, leak-free seal for both stock and aftermarket 65mm or 70mm throttle body installations.

• Direct fit for 65mm and 70mm throttle body applications
• Premium gasket material resists blow-outs and heat-related failure
• Prevents air and coolant leaks to maintain engine performance
• Same gaskets included in BBK Power Plus series kits
• Made in the USA
• Manufacturer Part Number: 1605

Fits select 1985-1997 Buick, Chevrolet, and Pontiac models including Camaro, Corvette, Firebird, Roadmaster, Caprice, and Impala SS (305 / 350 / LT1).

The BBK 1584 Twin 58mm Throttle Body Gasket Kit is designed to restore and maintain a proper seal on high-performance intake systems. Over time, factory gaskets can dry out or deteriorate, causing vacuum leaks or coolant passage failures that negatively impact engine performance and driveability. These premium gaskets are crafted from high-quality graphite material, ensuring a long-lasting seal that withstands the heat and pressure of the engine bay.

This kit is the same premium set included with BBK Power Plus series throttle bodies and is compatible with both stock and aftermarket twin 58mm throttle body installations. It is recommended to replace these gaskets whenever the throttle body is removed for cleaning, repair, or replacement to ensure leak-free operation and optimal air intake.

• Manufacturer Part Number: 1584
• Material: Premium Graphite
• Configuration: Twin 58mm Bore
• Origin: Made in the USA
• Application: Fits 1985-1997 GM Small Block and LT1 Engines

Fits select 1986-1993 Ford Mustang, Thunderbird, and LTD, Lincoln Town Car and Mark VII, and Mercury Cougar and Grand Marquis models.

Over time, factory throttle body gaskets can deteriorate, dry out, or crack, leading to vacuum leaks or coolant seepage that negatively impacts drivability and idle quality. This BBK Performance gasket kit is designed to provide a reliable, airtight seal whenever the throttle body is removed for cleaning, repair, or replacement. These are the same premium gaskets included with BBK Power Plus series throttle bodies, making them an ideal choice for both stock and aftermarket 75mm EFI installations.

• Manufactured from premium "Secure Seal" gasket material for maximum durability
• Designed specifically for 75mm throttle body bores
• Prevents unmetered air leaks and coolant loss
• Direct replacement for worn or damaged OE gaskets
• Made in the USA
• Manufacturer Part Number: 1573

Fits select 1986-1995 Ford, Lincoln, and Mercury vehicles, including Mustang, Bronco, and F-Series trucks. This BBK Performance Power Plus series throttle body gasket kit is engineered to restore a vacuum-tight seal to your intake system.

Over time, factory gaskets can deteriorate, dry out, or compress, leading to air leaks or coolant seepage that negatively impacts idle quality and driveability. This kit replaces worn OE components and is a necessary requirement whenever the throttle body is removed for cleaning, repair, or replacement. Manufactured from premium "Secure Seal" material, these gaskets are the same high-quality components included in BBK Power Plus series throttle body kits.

• Precision-engineered for stock, 65mm, or 70mm throttle body bores
• Prevents vacuum leaks and maintains proper intake manifold pressure
• Compatible with both stock and aftermarket EFI intake setups
• Constructed from premium "Secure Seal" gasket material for durability
• Manufacturer Part Number: 1572
• Made in the USA

Upgrade the critical airflow components of your 2022+ Subaru WRX with the AMS Performance Air Intake Duct and Airbox Kit. This package is engineered to replace the restrictive factory intake ducting and airbox, optimizing the path for ambient air to reach your air filter.

Designed for enthusiasts looking to enhance their intake system while potentially retaining their preferred aftermarket or stock filter, this kit focuses on improving flow efficiency and reducing heat soak. It provides a more direct and less turbulent route for air, supporting better engine response and performance, especially when paired with other intake modifications.

• Specifically designed for the 2022+ Subaru WRX.
• Replaces factory air intake duct and airbox.
• Optimizes airflow to the air filter for improved efficiency.
• Helps reduce intake air temperatures (IATs).
• Manufacturer Part Number: AMS.50.08.0003-1

Fits 2008-2017 Mitsubishi Lancer models, including Evolution X and Ralliart. The AMS Performance Intake Fan Shield is a purpose-built solution designed to protect your air filter from engine bay heat soak. During low-speed operation or idling, the radiator fan forces hot air directly toward the intake area; this shield creates a physical barrier to ensure the turbocharger draws in cooler, denser air from outside the engine bay.

• Prevents hot air from the radiator fan from entering the intake tract
• Maintains lower intake air temperatures for more consistent power delivery
• Engineered specifically for the AMS Standard Intake system (not compatible with CAI)
• Direct-fit installation using existing mounting points
• Manufacturer Part Number: AMS.04.08.0006-1

Fits 2008-2015 Mitsubishi Lancer Evolution X (GSR, MR, MR Touring, SE, and Final Edition).

The AMS Performance Replacement Intake Pipe for the Evolution X is engineered to optimize airflow to the turbocharger while simplifying the engine bay layout. By replacing the restrictive factory unit, this pipe reduces turbulence and provides a more direct air path, supporting higher boost levels and increased performance. This pipe features an integrated MAF (Mass Air Flow) housing and precision-placed bungs to ensure all factory sensors and vacuum lines retain their original functionality.

• Precision-integrated MAF housing for accurate sensor readings
• Direct replacement for the restrictive factory intake pipe
• Includes necessary bungs for vacuum line connections
• Durable black finish for a professional, clean aesthetic
• Designed to optimize airflow and reduce intake restriction
• Manufacturer Part Number: AMS.04.08.0002-2

Fits 2008-2015 Mitsubishi Lancer Evolution X (GSR, MR, MR Touring, SE, and Final Edition).

The AMS Performance Replacement Intake Pipe for the Evo X is engineered to eliminate restrictive factory components, streamlining the air path to the turbocharger for improved spool and throttle response. This high-flow design simplifies the engine bay layout while providing the volume necessary for significant power gains. During development, testing on a shop vehicle utilizing an AMS Manual Boost Controller at 21 psi showed increases of up to 45 awhp over the factory intake system.

Constructed for a precise fit, this pipe includes an integrated MAF (Mass Air Flow) sensor housing and all necessary vacuum bungs to maintain proper sensor placement and engine function. The high-polished finish provides a durable, show-quality appearance for the engine bay.

• MPN: AMS.04.08.0002-1
• Finish: Polished aluminum
• Components: Integrated MAF housing and vacuum bungs
• Compatibility: Replaces factory intake pipe on 2008-2015 Evolution X models
• Installation: Direct replacement for the OEM unit

The Airaid U-Build-It (UBI) MAF Adapter Tube (MPN 9641) is a specialized component engineered for fabricators and enthusiasts building custom cold air intake systems. This 4.0-inch diameter tube features an integrated 9700 Hitachi-style mounting plate, providing a precise and stable interface for your mass air flow sensor within a custom induction setup.

Designed to integrate seamlessly with other Airaid UBI components, this adapter helps maintain accurate sensor readings and a professional finish for engine swaps or unique performance builds. Its modular design eliminates the guesswork of mounting delicate electronic sensors in aftermarket plumbing.

• Tube Diameter: 4.0 inches
• Sensor Interface: 9700 Hitachi Plate
• Series: U-Build-It (UBI)
• Quantity: Sold individually
• Compatibility: Universal for custom intake fabrication
• Manufacturer Part Number: 9641

The AIRAID 723-472 Premium Replacement Filter is engineered to provide high airflow and superior engine protection. This performance air filter utilizes multiple layers of specialized filter media to trap dirt particles more effectively than standard cotton-gauze designs. Whether replacing a worn unit in an existing AIRAID intake kit or upgrading a custom induction setup, this filter delivers the filtration efficiency required for demanding environments.

• Precision Engineering: Designed to optimize airflow while maintaining high filtration standards.
• Advanced Media: Multi-layer filtration technology captures fine contaminants without restricting performance.
• Versatile Fitment: Designed for specific AIRAID intake systems and various universal or custom applications.
• Build Quality: Proudly designed and manufactured in the USA using premium materials and advanced production standards.
• MPN: 723-472

The Airaid 722-128 Premium Replacement Air Filter is engineered to maintain the high-flow performance of your Airaid intake system. Specifically designed for Dodge and Ford diesel applications, this filter utilizes multiple layers of specialized filter media to provide superior filtration without sacrificing the airflow required for optimal horsepower and torque.

Built as a direct replacement for specific Airaid kits, this filter is designed to capture fine dirt particles that standard cotton-gauze filters often miss. Whether you are servicing your diesel truck or refreshing a custom intake setup, this USA-made filter ensures your engine receives clean, high-velocity air for more efficient combustion.

• Manufacturer Part Number: 722-128
• Filter Media: Multi-layer technology for enhanced dirt retention and high airflow
• Compatibility: Direct replacement for select Airaid Dodge and Ford diesel intake kits
• Engine Fitment: Optimized for 6.7L and 6.0L diesel platforms
• Manufacturing: Proudly designed and manufactured in the USA

The AIRAID 721-478 Premium Replacement Filter is engineered to maximize airflow while maintaining rigorous filtration standards. Designed to replace restrictive factory elements or upgrade existing aftermarket intakes, this filter uses a multi-layer media technology to capture fine debris more effectively than standard cotton-gauze designs. This helps protect internal engine components while reducing intake restriction to support gains in horsepower and torque.

• High-Flow Media: Multiple layers of specialized filtration material provide superior dirt retention and airflow.
• Universal Application: Ideal for custom engine builds, specialized intake housings, or upgrading other performance intake brands.
• Rugged Construction: Built to withstand engine bay heat and vibration using premium materials.
• USA-Made Quality: Proudly designed and manufactured in the United States.
• Part Number: 721-478

The AIRAID Premium Filter 721-476 is a high-flow replacement air filter engineered to optimize engine airflow while maintaining superior filtration efficiency. Designed for custom applications or as an upgrade for existing intake systems, this filter utilizes AIRAID’s unique filtration technology to capture dirt particles that standard cotton-gauze filters often miss.

Constructed with multiple layers of specialized filter media, this universal premium filter provides a significant improvement in air volume without compromising engine protection. Whether you are building a custom intake or refreshing an existing kit, this filter provides the durability and performance required for demanding environments. Every AIRAID Premium Filter is designed and manufactured in the USA using high-quality materials to ensure precise fitment and long-lasting service.

• Manufacturer Part Number: 721-476
• Filter Media: Multiple layers of advanced filtration technology
• Design: Universal application for custom or upgraded intake systems
• Origin: Proudly designed and manufactured in the USA
• Performance: High-flow design engineered to improve airflow over ordinary filters

The AIRAID Premium Kit Replacement Air Filter is engineered to provide a significant increase in airflow while maintaining high filtration efficiency. Designed to replace worn filters in AIRAID intake systems or for use in custom applications, this filter (MPN 721-472) helps optimize engine performance by reducing intake restriction, supporting gains in horsepower and torque.

This performance air filter is constructed using multiple layers of specialized filter media. This advanced filtration technology allows the unit to capture fine dirt particles that standard cotton-gauze filters may allow through, protecting your engine's internal components without sacrificing flow. Its robust construction ensures it stands up to the rigors of high-performance driving.

• Increased Airflow: High-flow design reduces restriction to improve engine breathing and throttle response.
• Multi-Layer Media: Utilizes AIRAID’s unique filtration technology to trap contaminants more effectively than traditional gauze.
• Universal Versatility: Suitable for AIRAID kit replacements or custom-built intake configurations.
• Durable Construction: Manufactured using premium materials to withstand high-heat engine environments.
• Origin: Proudly designed and manufactured in the USA.

The AIRAID 721-243 Premium Replacement Air Filter is engineered to provide a high-flow, low-restriction path for your engine's intake system while maintaining strict filtration standards. Designed for custom applications or as an upgrade for existing intake kits, this filter utilizes advanced multi-layer dry filtration technology. The synthetic black media efficiently captures fine dirt particles without the need for traditional filter oil, simplifying maintenance and ensuring clean air delivery.

• Part Number: 721-243
• Filter Type: Universal Replacement Air Filter
• Media Type: Dry (Non-Oiled)
• Media Color: Black
• Construction: Multi-layer synthetic filtration technology
• Fitment: Universal application for custom or compatible intake systems
• Origin: Designed and manufactured in the USA