This aFe MagnumFORCE Spare Parts Trim Seal Kit (MPN 59-10095) provides a robust, weather-tight solution for sealing cold air intake housings against the vehicle hood, fender well, or air inlet. Designed to isolate the intake from engine bay heat, moisture, and dust, this seal also significantly reduces vibrations and rattling.

Constructed from flexible, durable PVC with a co-extruded 7/16-inch EPDM bulb, this seal is built to resist separation. The integrated aluminum retaining clips ensure a secure grip on 1/16-inch edges, while accommodating an overall thickness range of 1/32-inch to 1/8-inch. This kit is a direct replacement for worn seals on many aFe POWER intake systems and is suitable for various automotive and industrial applications.

• Dimensions: 1/16" edge x 7/16" bulb x 36" length
• Material: PVC edge with EPDM bulb and internal aluminum retaining clips
• Temperature Range: -40°F to 212°F (-40°C to 100°C)
• Edge Fitment: Fits edge thicknesses from 1/32" to 1/8"
• Manufacturer Part Number: 59-10095

Maintain peak intake efficiency with the aFe Magnum FORCE Spare Parts Trim Seal Kit (MPN: 59-10092). This 36-inch replacement trim seal is engineered to create a tight, durable barrier between your cold air intake housing and the vehicle’s hood, fender well, or air inlet. By sealing out engine bay heat, dust, and moisture, it ensures your engine draws in cooler air while reducing housing vibration.

Constructed from flexible PVC with integrated aluminum retaining clips, this seal provides exceptional grip on edges ranging from 1/32” to 1/8” thick. The co-extruded design features a 3/4” EPDM rubber bulb that resists separation and withstands extreme engine bay temperatures ranging from -40°F to 212°F (-40°C to 100°C).

• Compatibility: Fits select aFe POWER Momentum and Magnum FORCE cold air intake systems; refer to your system's instruction sheet for specific sizing.
• Durable Materials: Flexible PVC edge trim with a 3/4” EPDM rubber bulb for a superior weather seal.
• Mechanical Grip: Internal aluminum clips ensure a firm, long-lasting attachment to the mounting edge.
• Heat Resistance: Rated for operation between -40°F and 212°F.
• Specifications: 1/16” thickness, 3/4” bulb diameter, and 36” total length.

Fits select 2001-2004 Chevrolet Silverado 2500 HD/3500 and GMC Sierra 2500 HD/3500 models.

The aFe Power MagnumFORCE AIS Resonator Plug is a specialized replacement component designed to streamline your Duramax inlet tube. This plug allows you to remove the bulky factory resonator from the induction system, creating a cleaner engine bay and a more direct induction path. Engineered as a professional-grade alternative to makeshift hardware or PCV pipe solutions, it ensures a secure, air-tight seal for long-term reliability in diesel environments.

• Manufacturer Part Number: 59-10082
• Direct replacement plug for aFe Power intake systems XX-10782 and 80782
• Eliminates bulky factory intake resonator for a more streamlined appearance
• Precision-fit construction specifically for Duramax diesel applications
• Simplifies engine bay maintenance and provides a professional finish

The aFe Power Magnum FORCE MAF extension harness (MPN: 59-06301) provides an additional 12 inches of reach for the factory Mass Air Flow sensor. This specialized harness is designed for select 2011-2020 Ford F-150 and F-250/F-350 Super Duty models equipped with the V8-6.7L diesel engine. It is specifically engineered to accommodate relocated MAF sensor positions required by high-performance aFe Power intake systems.

Built for professional-grade reliability, this harness features high-quality automotive wire and protective looming. The factory-style connectors ensure a secure, weather-tight connection that replicates the original equipment fit. This allows for a clean installation without cutting, splicing, or modifying the factory wiring harness.

• Direct plug-and-play installation for a quick and easy setup
• 12-inch extension length accommodates relocated intake sensors
• High-quality protective loom preserves wire integrity in harsh engine bay environments
• 100% of units are tested for continuity and reliability
• Maintains factory-style connection points with no modifications required
• Manufacturer Part Number: 59-06301

Ensure a secure, airtight seal for your vehicle's factory air temperature sensor with this aFe POWER replacement fitting. Specifically designed for use with aFe POWER air intake systems, this component provides the critical mounting point required for the ECU to receive accurate intake air temperature data.

This fitting is manufactured from premium Nylon 66, a material chosen for its excellent thermal stability and chemical resistance within the engine bay. It replaces worn or damaged hardware to prevent vacuum leaks and ensure the sensor remains properly seated during high-vibration conditions.

• Direct replacement for aFe POWER fitting 05-01454 and grommet 03-50167
• Constructed from high-strength black Nylon 66
• Includes high-quality rubber grommet for a leak-free seal
• Genuine aFe POWER service part engineered for cold air intake tubes
• Manufacturer Part Number: 59-06202

Fits 2016-2025 Ford F-150 (V6-2.7L / 3.5L).

Ensure your aFe POWER cold air intake system operates at peak efficiency with this replacement vent tube insert. Specifically engineered for the Ford F-150 EcoBoost platforms, this component inserts into the factory vent fitting to maintain the precise amount of vacuum required by the ECU. Its primary function is to prevent the common P04DB check engine light (Crankcase Ventilation System Disconnected) that can occur after installing an aftermarket intake.

This spare part is a direct replacement for lost or damaged inserts originally included with aFe POWER Magnum FORCE intake kits. Constructed from durable, injection-molded nylon, it provides a secure fit and long-lasting performance in high-heat engine bay environments.

• Manufacturer Part Number: 59-06201
• Material: Injection-molded nylon
• Installation: Direct replacement for aFe POWER intake systems
• Solution: Resolves P04DB Check Engine Light issues

Maintain your intake system efficiently with the aFe POWER Momentum Series Replacement Sight Window. This oblong clear window allows for quick visual inspections of your air filter's condition without requiring the disassembly of the intake housing, saving time during routine maintenance.

Constructed from injection-molded polycarbonate, this sight window is engineered for high-impact resistance and durability against engine bay heat and vibration. It serves as a direct replacement for damaged or clouded windows on compatible aFe POWER Momentum cold air intake systems (Part Number 59-06104).

• Durable Construction: Injection-molded clear polycarbonate is designed to resist cracking and impact.
• Transparent Finish: Enables hassle-free filter status checks without tools or disassembly.
• Secure Installation: Includes six push nuts to lock the window firmly to the existing intake housing.
• Compatibility: Fits a wide range of aFe POWER Momentum cold air intake systems.
• MPN: 59-06104

Ensure a clean and professional seal on unused intake ports with the aFe Takeda Universal 1-Inch Silicone Cap Kit. Designed as a reliable replacement or for custom intake configurations, this kit provides a durable alternative to makeshift plugs, preventing unwanted air leaks and ensuring consistent engine performance.

Constructed from high-temperature silicone, this 1" cap is engineered to withstand engine bay heat cycles without cracking or losing its seal. The included worm gear clamp provides a secure, vibration-resistant fit suitable for intake ports or vacuum line terminations.

• Universal Fitment: Designed for 1-inch (25.4mm) diameter ports.
• Premium Construction: High-temperature silicone material for longevity and heat resistance.
• Complete Installation: Includes one 1" silicone cap and one stainless steel worm gear clamp.
• MPN: 59-03012

Ensure a leak-free, high-pressure seal on your air intake system with the aFe Power Magnum FORCE T-Bolt Replacement Clamp Kit. Engineered for heavy-duty applications, these T-bolt clamps provide significantly more uniform clamping force than standard worm-gear clamps, making them ideal for securing critical hose-to-tube interfaces in high-vibration or boosted environments.

• Precision Fitment: Optimized for diameters ranging from 5-5/16 inch to 5-5/8 inch ID.
• Premium Construction: Manufactured from corrosion-resistant stainless steel to withstand heat and moisture in the engine bay.
• Serviceable Design: Features a robust tensioning bolt that can be easily tightened with a standard 7/16 inch socket.
• Reliability: Designed as a direct replacement for Magnum FORCE intake system hardware (Part Number: 59-01033).

Ensure a secure, flexible connection in your intake system with the aFe MagnumFORCE 40-degree elbow reducing silicone coupler (MPN 59-00047). Engineered as a high-quality spare part for cold air intake systems, this reducer transitions from a 4" ID to a 3.5" ID, providing a reliable bridge between different tube diameters while managing engine movement.

Constructed from 2-ply reinforced high-temperature silicone, this 3-inch long coupler is built to withstand the rigors of racing, off-road, and heavy-duty truck applications. The reinforced material allows for natural engine expansion, movement, and vibration without compromising the seal or risking cracks. For a complete installation, the kit includes corrosion-resistant #056 and #064 stainless steel worm-gear clamps for tight, leak-free connections.

• Dimensions: 4" to 3.5" ID reduction with a 40-degree bend
• Overall Length: 3 inches
• Material: 2-ply reinforced high-temp silicone
• Included Hardware: #056 and #064 stainless steel worm-gear clamps
• Resilience: Resistant to corrosion and high-heat engine environments
• Part Number: 59-00047

The aFe Magnum FORCE Silicone Replacement Coupling Kit (59-00045) provides a professional-grade connection for 3.5-inch intake or intercooler tubing. Constructed from high-temperature, 2-ply reinforced silicone, the integrated hump design allows for the necessary expansion, engine vibration, and movement that rigid couplers cannot absorb. This kit includes two #056 stainless steel worm-gear clamps to ensure a tight, corrosion-resistant seal for racing, off-road, and commercial applications.

• Part Number: 59-00045
• Inside Diameter: 3.5"
• Total Length: 3"
• Material: High-temp 2-ply reinforced silicone
• Design: Straight hump coupler for vibration and movement isolation
• Included Hardware: Two #056 stainless steel worm-gear clamps

The aFe Magnum FORCE Silicone Replacement Coupling Kit is engineered to provide a secure, heat-resistant connection for high-performance intake systems. This elbow reducer configuration allows for the necessary expansion, movement, and vibration dampening required in demanding engine environments, preventing stress on intake components while maintaining a leak-free seal.

Each coupler is constructed from 1-ply reinforced high-temperature silicone designed to withstand significant thermal stress and meet or exceed SAEJ20 standards. The kit includes corrosion-resistant stainless steel worm gear clamps to ensure a durable, tight connection that resists loosening over time.

• Inner Diameter: 4.15 in.
• Length: 3.5 in.
• Type: Elbow Reducer
• Material: 1-Ply Reinforced High-Temp Silicone
• Standards: Meets or exceeds SAEJ20 requirements
• Hardware: Includes stainless steel worm gear clamps
• Manufacturer Part Number: 59-00036

Fits 2018-2023 BMW M5 (F90) including Base, Competition, CS, and Edition 35 Years models.

aFe Momentum Black Series Dynamic Air Scoops are engineered to lower intake air temperatures by capturing and forcing cool, high-pressure air from the front grilles directly into the factory intake tract. This design helps prevent heat soak and improves airflow efficiency into the engine.

Constructed from 100% twill weave carbon fiber—not a fiberglass overlay—these scoops are lightweight, heat-resistant, and aesthetically striking. They feature a high-gloss finish on the exterior for a premium look behind the grilles, with a smooth matte finish on the interior to reduce air turbulence. Installation is straightforward: the scoops are precisely designed to snap directly into the factory inlet ducts and mount onto the vehicle's V-support brace without the need for additional hardware.

• Includes Driver and Passenger side scoops (Set of 2)
• 100% lightweight twill weave carbon fiber construction
• Gloss exterior and matte interior finishes
• Snaps into factory inlet ducts and mounts to V-support brace
• No additional hardware or cutting required
• Manufacturer Part Number: 58-10005SC

Fits 2023-2026 Toyota GR Corolla (Circuit Edition, Core, Morizo Edition, Premium, and Premium Plus).

The aFe Takeda Dynamic Air Scoop (D.A.S.) is engineered to enhance the performance and throttle response of your GR Corolla by forcing cool, high-pressure air from behind the front grille directly into the intake tract. By capturing ambient air before it is heated by the engine bay, the D.A.S. ensures a cooler, denser air charge for improved efficiency and power delivery.

Constructed from high-quality linear low-density polyethylene (LLDPE), this scoop is impact-resistant, extremely durable, and 100% recyclable. It is specifically designed to fit Takeda Momentum Cold Air Intake Systems (P/N 56-70065D and 56-70065R). The installation is precise and simple, clipping directly onto the factory radiator support with no cutting or permanent modifications required.

• Directs cool ambient air from the front grille into the intake system
• Improves airflow velocity and reduces intake air temperatures
• Made from durable, impact-resistant LLDPE polymer
• Designed for Takeda Momentum intake systems 56-70065D and 56-70065R
• Hassle-free installation using factory mounting points
• Manufacturer Part Number: 56-70065S

Fits the Hyundai Palisade. This aFe Power Takeda Dynamic Air Scoop (D.A.S.) is engineered to increase fresh airflow by capturing ambient air from behind the front grille. By guiding cooler, denser air directly into your intake system, it increases air velocity to improve throttle response and engine efficiency.

Constructed from high-quality linear low-density polyethylene (LLDPE), this scoop is impact-resistant, extremely durable, and 100% recyclable. The 56-70059S is designed for a precise fit with Takeda Momentum intake systems, clipping directly to the factory radiator support without requiring any vehicle modifications or drilling.

• Specifically designed for Takeda Momentum Cold Air Intake Systems (P/N: 56-70033D and 56-70033R)
• High-quality LLDPE polymer construction for maximum impact resistance
• Captures cool, dense air from behind the front grille for better performance
• Easy installation clips directly to factory radiator support mounts
• All necessary hardware included for a complete install
• Manufacturer Part Number: 56-70059S

Fits 2020-2025 Jeep Gladiator Mojave (V6-3.5L).

Engineered specifically for the high-speed desert performance of the Jeep Gladiator Mojave, the aFe POWER Dynamic Air Scoop (D.A.S.) Snorkel delivers a steady supply of cooler, cleaner air to your intake system. This snorkel features a taller, model-specific riser designed to clear the Mojave's unique hood profile, ensuring a seamless factory-integrated look while protecting your engine from dust, sand, and heat soak during intense off-road use.

The system utilizes a no-cut, no-drill cowl pass-through design, preserving your factory body panels and allowing for a fully reversible installation. For maintenance convenience, a removable runner section provides quick access to the battery and fuse box without requiring full disassembly. To match the Mojave's signature aesthetics, the snorkel includes a precision-machined orange aluminum bezel that coordinates with the OEM interior and exterior accents.

• Manufacturer Part Number: 55-21005
• Mojave-Specific Riser: Taller profile engineered to match the unique factory Mojave hood height.
• Forward-Facing D.A.S. Inlet: Optimizes airflow at speed while reducing dust ingestion in silt and sand.
• Orange Aluminum Bezel: Durable finish designed to match the signature factory Mojave orange accents.
• No-Drill Installation: Integrates cleanly with the factory airbox via a cowl pass-through with no cutting required.
• Maintenance Friendly: Removable runner for engine bay access and integrated moisture drain plug.
• Off-Road Ready: Fully sealable system for water crossings and protection against airborne contaminants.

Fits select 2018-2025 Jeep Wrangler (JL) and 2020-2025 Jeep Gladiator (JT) models equipped with L4-2.0L Turbo, V6-3.6L, or 4xe powertrains.

The aFe POWER Dynamic Air Scoop (D.A.S.) Snorkel is engineered to provide your engine with a consistent supply of cooler, cleaner air while navigating challenging environments. Designed with a cowl-pass-through system, this snorkel integrates directly with the factory airbox without requiring permanent modifications to the vehicle's body. The no-cut, no-drill design ensures the installation is completely reversible, preserving the original configuration of your Jeep.

This system features a fully sealable design for water fording, complemented by a removable drain plug to evacuate water from the intake tract. For routine maintenance, a removable runner section provides quick access to the battery and fuse box. The exterior aesthetics are customizable via interchangeable aluminum grilles and bezels, allowing for a personalized look that matches the vehicle’s rugged profile.

• Manufacturer Part Number: 55-21001
• No-cut, no-drill installation via cowl-pass-through design
• Sealable intake system with removable drain plug for deep-water crossings
• Removable runner section for easy engine bay maintenance
• Interchangeable high-quality aluminum grilles and bezels
• Optimized forward-facing inlet for improved airflow efficiency at speed

Fits select 2003-2007 Ford F-250/F-350 Super Duty and 2003-2005 Ford Excursion (V8-6.0L Turbo Diesel).

The aFe Power Magnum FORCE Torque Booster Tube is engineered as a direct replacement for the aging, brittle factory intake tube that is prone to cracking and dry-rotting. This CAD-designed, dyno-tuned component is roto-molded from heat-resistant cross-linked polyethylene (XLPE), ensuring a smooth interior surface for maximum airflow and resistance to heat soak. The kit includes 5-ply reinforced silicone couplings designed to withstand high-temperature conditions without cracking or failing under pressure. This 4-inch intake tube is a 100% bolt-on solution that integrates seamlessly with both factory and aFe Power intake systems without the need for cutting or drilling.

• Direct replacement for the factory intake tube using part number 54-81029
• Durable roto-molded XLPE plastic construction resists engine bay heat
• High-temperature 5-ply reinforced silicone couplings
• Includes (4) premium stainless-steel worm gear clamps
• 4-inch inlet and outlet diameter for maximum flow
• Quick and easy installation requires no modifications to OEM parts

Fits 2012-2015 Toyota Tacoma (V6-4.0L).

The aFe Power Momentum GT Dynamic Air Scoop (D.A.S.) is a high-efficiency intake accessory engineered to increase airflow and velocity into your Momentum GT intake system. By capturing cool, high-pressure air from the front grille area and directing it into the air intake’s auxiliary scoop, this component helps lower intake air temperatures (IAT) for improved performance and throttle response.

Precision-manufactured using advanced CAD design, this scoop is constructed from durable, roto-molded cross-linked polyethylene (XLPE). This material is specifically chosen for its superior heat-soak resistance and structural integrity. The installation is straightforward and requires no cutting or drilling of factory parts, as it bolts directly to existing mounting points for a secure, factory-like fit.

• Performance Airflow: Captures ambient air from the front grille to increase intake air velocity.
• Heat-Resistant Construction: Made from high-quality, roto-molded XLPE plastic to prevent heat soak.
• OEM Integration: Designed to work seamlessly with aFe Momentum GT intake systems.
• Simple Installation: Hassle-free bolt-on design requires no modifications to factory components.
• Manufacturer Part Number: 54-76012-S

Fits 2008-2021 Toyota Land Cruiser and Lexus LX570 (V8-5.7L).

The aFe POWER Dynamic Air Scoop (D.A.S.) is a high-efficiency bolt-on component designed to decrease intake air temperatures while increasing airflow velocity. This scoop captures cool air from behind the front grille and directs it into the intake tract, preventing the engine from drawing in stagnant, heated air from the engine bay.

Constructed from high-quality, cross-linked polyethylene (XLPE), this air scoop is rotomolded for maximum durability and heat-soak resistance. The CAD-designed geometry ensures a precision fit and optimizes airflow pathing, while the material's thermal properties maintain cooler intake charges for better performance.

• Captured air is forced into the intake system to improve airflow velocity
• Rotomolded from cross-linked polyethylene (XLPE) for heat resistance and strength
• CAD-designed for a precision fit using factory mounting points
• Simple bolt-on installation requires no cutting or drilling
• Designed to complement aFe POWER Momentum GT intake systems
• Manufacturer Part Number: 54-76006-S

Fits 2017-2019 Ford F-250 and F-350 Super Duty models (V8-6.7L diesel).

The aFe Power Dynamic Air Scoop (D.A.S.) is a high-performance upgrade designed to increase airflow and air velocity into your Momentum HD intake system. By capturing cool, high-pressure air from the front of the vehicle and directing it into the auxiliary scoop of the intake housing, this component effectively lowers intake air temperatures for improved engine efficiency.

Constructed from CAD-designed, roto-molded plastic, this scoop is built for durability and a precise fit. The snap-on design allows for a hassle-free installation that requires no cutting or drilling into factory components. This scoop is specifically engineered as a direct upgrade for the aFe Momentum HD cold air intake system (P/N 50-73006).

• Manufacturer Part Number: 54-73006-S
• Directs forward air into the intake system to increase velocity
• CAD-designed roto-molded plastic construction for maximum durability
• Lowers intake air temperatures by forcing cool air into the system
• Simple snap-on installation with no cutting or drilling required
• Includes all necessary hardware for a complete install

Fits 2011-2023 Dodge Challenger, 2012-2020 Dodge Charger, and 2012-2014 Chrysler 300 (V6-3.6L / V8-5.7L / 6.4L HEMI).

Lower intake air temperatures and improve engine efficiency with the aFe POWER Momentum GT Dynamic Air Scoop (D.A.S.). This scoop leverages the factory "Air Catcher" headlight inlet to guide cool, dense ambient air from outside the vehicle directly into the intake tract. By providing a more direct airflow path, this component helps your engine run more efficiently and improves throttle response.

• Premium Construction: Manufactured from 100% carbon fiber with a plain weave pattern and a high-gloss clear coat finish for superior heat resistance and a lightweight, high-end look.
• Direct Fit Installation: CAD-designed to snap into the factory air box with no vehicle modifications or drilling required.
• System Compatibility: Works with the factory Hellcat airbox, aFe POWER Momentum GT intake systems (P/Ns: 51/54-72201, 51/54-72202, 51/54-72203), and aFe POWER Black Series Carbon Fiber systems (P/Ns: 52-72205-CF, 52-72204-CF, 58-10003R/D).
• Fitment Note: Does not fit models equipped with R/T Scat Pack or Rhombi Illuminated air catcher headlamps. Refer to part 50-70009S for those applications.
• Emissions Status: This product does not require a CARB EO#.
• MPN: 54-72203-SF

Fits 2015-2025 Ford F-150 (V6-2.7L).

The aFe POWER Magnum FORCE 12-inch Intake Air Temperature (IAT) Sensor Harness Extension (MPN 54-22979) is engineered to provide the additional length required when installing or relocating components for aftermarket cold air intake systems. This extension solves the problem of stretched or unreachable factory wiring, ensuring your sensor can be mounted in the optimal position for accurate readings.

• Plug-and-Play Installation: Equipped with factory-style connectors for a secure, click-in fit without the need for cutting, splicing, or pinning your original harness.
• High-Quality Construction: Features high-reliability wiring protected by industrial-grade looming to resist heat and abrasion within the engine bay.
• Verified Reliability: 100% of units are factory-tested to ensure electrical continuity and long-term performance.
• Specifications: 12-inch length; compatible with other aFe POWER performance products and factory systems.

Fits 2019-2023 Ford Ranger Lariat, XL, and XLT (2.3L).

Maximize your Ford Ranger's performance with the aFe POWER Magnum FORCE Dynamic Air Scoop (D.A.S.). This red air scoop is engineered to capture the coolest, freshest air from the top of the front grille and guide it directly into your intake system. By increasing air velocity and density, this component helps your engine run more efficiently while improving throttle response.

Built for durability, the 54-13056SR is constructed from high-quality linear low-density polyethylene (LLDPE). This material is chosen for its impact resistance, extreme durability, and being 100% recyclable. The design is versatile, engineered to fit seamlessly with both factory intake systems and aFe POWER Quantum intakes.

• Increases cool, fresh airflow into the air intake system
• Durable, impact-resistant LLDPE polymer construction in a red finish
• Hassle-free snap-in installation using two factory securing screws
• Compatible with factory air boxes and aFe POWER Quantum intakes
• Manufacturer Part Number: 54-13056SR

Fits 2019-2023 Ford Ranger (2.3L).

The aFe POWER Magnum FORCE Dynamic Air Scoop (D.A.S.) is engineered to maximize cool, fresh airflow into your intake system. By capturing air from the top of the front grille, this scoop increases air velocity and reduces intake temperatures for improved throttle response and engine efficiency. It is constructed from black linear low-density polyethylene (LLDPE), a durable, impact-resistant polymer designed to withstand engine bay heat.

• Increased Air Density: Guides cool ambient air directly into the intake tract, bypassing warmer engine bay temperatures.
• Dual Compatibility: Designed to fit factory air intake systems as well as aFe POWER Quantum series intakes.
• Straightforward Installation: Snaps directly into the factory air box and reuses two OEM securing screws; requires no cutting or drilling.
• Heavy-Duty Construction: Made from 100% recyclable, impact-resistant LLDPE for long-term durability.

Manufacturer Part Number: 54-13056S

Fits 2015-2018 BMW M3 (Base) and 2015-2020 BMW M4 (Base, CS, GTS).

The aFe Power Magnum FORCE Dynamic Air Scoop is designed to capture and direct cool, high-pressure air from behind the front kidney grilles directly into the intake tracts. By increasing the volume of fresh air entering the system, these scoops help lower intake air temperatures and improve throttle response. This set is engineered to work seamlessly with both factory intake systems and aFe POWER intake upgrades.

Constructed from linear low-density polyethylene (LLDPE), these scoops are impact-resistant, 100% recyclable, and built to withstand the heat and debris of the engine bay. The vibrant blue finish provides a subtle performance accent visible through the front grilles. Installation is straightforward, using the included plastic push-in rivets to secure the scoops to the factory reinforcement support bar with no permanent modifications required.

• Manufacturer Part Number: 54-13032SL
• Material: Durable Linear Low-Density Polyethylene (LLDPE)
• Finish: Blue
• Installation: Securely mounts to factory radiator reinforcement bar
• Compatibility: Works with OE and aFe POWER intake systems
• Included Hardware: Plastic push-in rivets

Fits 2015-2020 BMW M3 and M4 (Base, CS, and GTS models).

The aFe POWER Magnum FORCE Dynamic Air Scoops are engineered to lower intake air temperatures by capturing and directing cool air from behind the front kidney grilles into the factory intake tracts. By increasing the volume of fresh air reaching the engine, these scoops help improve performance and throttle response.

Constructed from linear low-density polyethylene (LLDPE), these scoops are impact-resistant, extremely durable, and 100% recyclable. They are CAD-designed for a precise fit that sits directly in front of the radiator, ensuring compatibility with the factory radiator setup.

Installation is straightforward and requires no permanent vehicle modifications. The scoops secure to the factory reinforcement support bar using the included plastic push-in rivets. This kit is designed to work seamlessly with both factory intake systems and aFe POWER intake systems.

• Lowers air intake temperatures by forcing cool air from grilles into the intake
• Durable, impact-resistant LLDPE (linear low-density polyethylene) construction
• CAD-designed for a precise fit behind BMW kidney grilles
• Simple installation using included plastic push-in rivets to the reinforcement bar
• Compatible with OE and aFe POWER intake systems
• Manufacturer Part Number: 54-13032S

Fits select 2019-2021 RAM 1500 models equipped with compatible aFe POWER Stage-2 intake systems.

The aFe POWER Magnum FORCE Stage-2 Intake Cover (MPN 54-13020C) is engineered to enhance your intake system by shielding the air filter from engine bay heat and lowering air intake temperatures (IATs). This cover provides a clean, stealthy aesthetic while significantly reducing induction noise for a more comfortable cabin experience. It is designed to work seamlessly with your existing intake without obstructing airflow or sacrificing performance.

Constructed from vacuum-formed, black injection-molded ABS plastic, this cover is built for durability and heat resistance. Installation is remarkably simple and requires no tools or hardware; the design utilizes high-strength Rare-Earth magnets to snap securely onto the intake housing, allowing for quick removal during filter service or inspections.

• Compatible with aFe POWER intake systems 54-13020D, 54-13020R, 52-10002D, and 52-10002R.
• Constructed from durable, black injection-molded ABS plastic.
• Integrated Rare-Earth magnets for a secure, hardware-free magnetic snap-fit.
• Helps reduce air intake temperatures and engine bay noise.
• Quick and easy installation with a factory-plus appearance.
• Manufacturer Part Number: 54-13020C.

Fits 2015-2021 Ford Mustang EcoBoost, EcoBoost Premium, GT, and V6 models (2.3L / 3.7L / 5.0L).

The aFe Power Magnum FORCE Dynamic Air Scoop (D.A.S.) is designed to capture the coolest ambient air from the front grille and direct it straight into your intake system. By increasing the volume and velocity of cool, dense air, this scoop helps improve engine efficiency and throttle response. The CAD-designed shape ensures maximum airflow while maintaining a secure, factory-style fit.

Construction is handled with high-quality, red linear low-density polyethylene (LLDPE). This material is chosen for its high impact resistance, durability, and temperature stability. Installation is straightforward and requires no hardware, as the unit is designed to snap directly into the factory inlet location using integrated locking tabs.

• Manufacturer Part Number: 54-13015SR
• Material: Linear Low-Density Polyethylene (LLDPE)
• Finish: Red
• Installation: Hardware-free, snap-in design with locking tabs
• Compatibility: Works with factory intakes and aFe POWER intake systems
• Build: Impact-resistant and 100% recyclable

Fits select 2015-2021 Ford Mustang EcoBoost, V6, and GT (2.3L / 3.7L / 5.0L).

The aFe Power Magnum FORCE Dynamic Air Scoop (D.A.S.) is designed to capture and guide the coolest, freshest ambient air from the front grille directly into your intake system. By increasing air velocity and providing a cooler, denser air charge, this scoop helps your engine run more efficiently for improved performance and quicker throttle response.

Constructed from high-quality black linear low-density polyethylene (LLDPE), the 54-13015S is impact-resistant, extremely durable, and 100% recyclable. This precision-molded component is engineered for a hassle-free installation, snapping directly into the factory inlet location using integrated locking tabs. It requires no vehicle modifications and is compatible with both factory airboxes and aFe POWER intake systems.

• Directs cool air from the front grille to the intake for maximum air velocity
• Durable, heat-resistant LLDPE polymer construction
• Simple snap-in installation with no hardware or drilling required
• Works with factory and aFe POWER air intake systems
• Manufacturer Part Number: 54-13015S