Fits 2011-2016 Chevrolet Silverado and GMC Sierra 2500/3500 HD (6.6L Duramax LML).

Replace the restrictive factory plastic intake with the WCFab 4" Intake Kit, designed to maximize airflow and optimize the performance of your 6.6L LML Duramax. This kit features a fabricated aluminum intake pipe with large 4" diameter piping and smooth, aerodynamic bends. By drawing colder, denser air through the inner fender, this system reduces intake temperatures, improves throttle response, and provides a more aggressive engine and turbo sound under load.

The included air box enclosure features a removable lid for easy maintenance and visual inspection. The system utilizes a high-efficiency dry air filter protected by an Outerwear's hydrophobic pre-filter cover, keeping your MAF sensor and turbocharger compressor wheel safe from contaminants and moisture. This is a true bolt-on upgrade that requires no aftermarket tuning for operation and is finished in WCFab Red powder coat for long-term durability.

• Fabricated 4" aluminum intake pipe and air box enclosure
• High-flow dry air filter with Outerwear's hydrophobic pre-filter cover
• Heavy-duty silicone boot and stainless steel T-bolt clamps
• Custom WCFab Red powder coat finish
• No tuning required; direct bolt-on installation
• Made in the USA
• Manufacturer Part Number: WCF100194-RED

Fits 2008-2010 Chevrolet Cobalt SS (L4-2.0L Turbo).

The K&N 69-4518TTK 69 Series Typhoon Short Ram Intake system is a performance-oriented induction kit designed to replace the restrictive factory air filter and intake housing on your Cobalt SS. By utilizing a mandrel-bent aluminum intake tube, this system reduces airflow restriction and ensures a smooth, consistent path for air to reach the turbocharger, resulting in measurable gains in horsepower and torque.

Each system is equipped with a washable, reusable High-Flow Air Filter featuring K&N signature oiled cotton filter media. This oversized conical filter is designed for high airflow and can go up to 100,000 miles between services under normal highway driving conditions. A custom-fit heat shield is included to isolate the air filter from high engine bay temperatures, ensuring a cooler, denser intake charge.

• Guaranteed increase in horsepower and torque
• Mandrel-bent aluminum intake tube for improved airflow
• Includes washable, reusable oiled cotton High-Flow Air Filter
• Custom heat shield helps protect intake air from engine heat
• Direct bolt-on installation using factory mounting points
• Manufacturer Part Number: 69-4518TTK
• K&N Million Mile Limited Warranty

Fits 2000-2008 Honda S2000 Base and CR models (2.0L / 2.2L).

The K&N 57-3514 Performance Air Intake System is engineered to replace the restrictive factory air filter and intake housing to provide a guaranteed increase in horsepower and torque. It features a rotationally-molded high-density polyethylene (HDPE) intake tube designed to streamline and increase the volume of airflow to your engine. The system includes a custom heat shield to help isolate the intake air from high engine bay temperatures, ensuring a cooler, denser oxygen charge for better combustion.

This kit is paired with a washable, reusable High-Flow Air Filter featuring K&N's signature oiled cotton filter media. The oversized conical design allows for up to 100,000 miles between filter services under normal highway driving conditions. The entire system is designed for a straightforward installation that can typically be completed in less than 90 minutes with basic hand tools.

• Manufacturer Part Number: 57-3514
• Tube Material: Rotationally-molded High-Density Polyethylene (HDPE)
• Filter Media: Oiled cotton gauze, washable and reusable
• Filter Style: Conical, oversized
• Installation Time: Approximately 90 minutes
• Warranty: K&N Million Mile Limited Warranty

Fits 2001-2004 Chevrolet Corvette models including Base, 50th Anniversary Edition, and Pace Car (V8-5.7L).

The K&N 57-3035 Performance Intake Kit is engineered to reduce intake restriction by replacing the restrictive factory air filter and intake housing. This system features a rotationally-molded high-density polyethylene (HDPE) intake tube designed to increase the volume of airflow to your engine. By streamlining the air path, this kit provides a tangible increase in horsepower and torque for the C5 Corvette.

This intake system includes a washable, reusable K&N High-Flow Air Filter made with oiled cotton media. Its oversized, conical design allows for extended service intervals, typically up to 100,000 miles under normal highway driving conditions. To ensure the engine breathes the coolest air possible, a custom-engineered heat shield isolates the filter from the high temperatures of the engine bay.

• Manufacturer Part Number: 57-3035
• Intake Tube Material: High-Density Polyethylene (HDPE)
• Filter Media: Oiled Cotton
• Service Interval: Up to 100,000 miles before cleaning is required
• Installation Time: Typically 90 minutes or less using factory mounting points
• Components Included: HDPE intake tube, oversized conical air filter, heat shield, and all necessary hardware

Fits 2005-2006 Pontiac GTO Base (6.0L V8).

The Volant Performance Pro 5 Closed Box Air Intake System is engineered to optimize airflow while protecting your engine from power-robbing heat. This system replaces the restrictive factory air box with a rugged, heat-shielded enclosure featuring an insulated metallic lid for easy filter access and maximum thermal protection. At its core is the Pro 5 filter, a high-performance 5-layer oiled cotton gauze filter that maximizes air volume without sacrificing filtration efficiency.

• Pro 5 Filter: Washable 5-layer oiled cotton gauze between aluminum screens for high flow and 98% efficiency.
• Heat Management: Rugged closed air box design shields the filter from ambient engine heat for cooler intake charges.
• Durable Components: Features high-quality stainless steel clamps and an insulated, easy-access lid.
• Maintenance: Reusable filter with extended service intervals up to 40,000 miles depending on driving conditions.
• Direct Bolt-On: Designed for a precise fit with a typical installation time of under one hour.
• CARB Approved: Emissions legal for street use.
• Manufacturer Part Number: 15860150

Fits 2002-2004 Ford Mustang GT (4.6L).

The K&N 69-3521TP Typhoon air intake system is a free-flowing, mandrel-bent aluminum tube induction system designed to reduce intake restriction and provide a guaranteed increase in horsepower and torque. By replacing the restrictive factory air filter and intake housing, this system allows your engine to breathe more efficiently, resulting in improved throttle response and engine sound.

Each system features an oversized, conical High-Flow Air Filter with oiled cotton media, designed to capture contaminants while maintaining high airflow. The filter is washable and reusable, capable of going up to 100,000 miles between services under standard highway conditions. This kit includes a custom heat shield to isolate the filter from high engine bay temperatures, ensuring cooler, denser air enters the engine.

• Part Number: 69-3521TP
• Tube Material: Mandrel-bent polished aluminum
• Filter Type: Washable, reusable oiled cotton High-Flow Air Filter
• Includes custom heat shield and all necessary mounting hardware
• Installation: Typically completed in 90 minutes or less using basic hand tools
• Warranty: K&N Million Mile Limited Warranty

Fits 2015-2017 Ford Mustang GT, GT 50 Years Limited Edition, and GT Premium models equipped with the V8-5.0L engine.

The K&N 57-Series FIPK (Fuel Injection Performance Kit) is a cost-effective performance upgrade designed to replace the restrictive factory air box and intake tubing on your Mustang GT. This system utilizes a CAD-designed high-airflow intake tube to streamline air delivery to the engine, improving throttle response and engine sound. It features K&N's legendary oiled cotton gauze filter media, which provides superior filtration and air capacity for high-performance applications.

This intake is engineered for a precise fit using factory mounting points and can be installed in approximately 90 minutes with basic hand tools. The included High-Flow Air Filter is washable and reusable, capable of going up to 50,000 miles between services under standard highway driving conditions. This system is 50-state legal and maintains emissions compliance.

• Manufacturer Part Number: 57-2590
• Filter Material: Washable Oiled Cotton Gauze
• Service Interval: Up to 50,000 miles before cleaning (depending on conditions)
• Compliance: Legal in all 50 U.S. states
• Warranty: K&N 10-Year/Million Mile Limited Warranty
• Installation: Bolt-on design; typically installs in under 90 minutes

Fits 1994-1995 Ford Mustang GT, GTS, and SVT Cobra (V8-5.0L).

The K&N 57 Series FIPK (Fuel Injection Performance Kit) replaces the entire factory air intake assembly, including the restrictive air box and paper filter. Designed to reduce intake restriction and straighten airflow, this system allows your 5.0L V8 engine to inhale a larger volume of air for improved throttle response and acceleration. The oversized, cone-shaped high-flow air filter installs into the original air box space, directing air through the factory mass air sensor and into the throttle body.

• Direct replacement for the factory air intake housing and filter
• High-flow, washable/reusable air filter can go up to 100,000 miles between cleanings
• Bolts to factory mounting points; typical installation in 90 minutes or less
• Street legal in all 50 US states (CARB EO compliant)
• Backed by the K&N Million Mile Limited Warranty
• Manufacturer Part Number: 57-2511

Fits 2014-2019 Chevrolet Corvette Stingray, Grand Sport, and ZR1 (6.2L).

The CORSA Performance C7 carbon fiber air intake system replaces the restrictive factory airbox with a high-flow, thermally efficient housing designed for maximum performance. Constructed from 100% pure red carbon fiber, this intake combines lightweight structural rigidity with a premium aesthetic. The optimized internal geometry is dyno-tuned to deliver gains of up to 15 HP and 15 lb-ft of torque on the LT1 engine without requiring an aftermarket ECU tune.

This kit features the DryTech non-oiled filter, providing high-capacity filtration and simplified maintenance. Each system includes a precision-machined black anodized aluminum MAF mounting bracket to ensure accurate sensor readings and factory-level fitment. Designed as a direct bolt-on solution, the intake can be installed in under an hour using the included premium hardware.

• Fits 2014-2019 Corvette Stingray, Grand Sport, and ZR1 models
• 100% pure red carbon fiber construction for superior heat rejection
• DryTech non-oiled high-performance synthetic filter
• Machined black anodized aluminum MAF mounting bracket
• Estimated gains of up to 15 HP and 15 lb-ft TQ
• No ECU recalibration or tune required
• Direct bolt-on installation with all hardware included
• Manufacturer Part Number: 44001D-R
• Limited Lifetime Warranty (1-year filter warranty)

The BMC Carbon Dynamic Airbox (CDA) is a high-performance universal filtration system designed for engines with a displacement greater than 1600cc. Unlike standard factory air boxes or open-element filters, the CDA utilizes a genuine carbon fiber housing to insulate the intake air from engine bay heat soak, ensuring a denser, cooler oxygen charge reaches the combustion chamber for improved volumetric efficiency.

Inside the carbon cylinder, a washable, multi-layer cotton air filter works in tandem with an internal flow deflector. This aerodynamic design minimizes pressure drops and creates a constant pressure airflow into the intake manifold, resulting in sharper throttle response and increased power throughout the RPM range. This universal kit (ACCDA85-150) is engineered for high-volume air requirements with 85mm diameter inlet and outlet ports.

• Thermal Insulation: Real carbon fiber construction acts as a superior heat barrier compared to plastic or metal.
• Dynamic Overpressure: Engineered to utilize the dynamic pressure of incoming air to force a higher volume into the engine.
• High-Flow Filtration: Features a reusable, pre-oiled multi-layer cotton filter that outperforms OE paper elements.
• Universal Fitment: Designed for custom installations on engines over 1.6L displacement.
• Manufacturer Part Number: ACCDA85-150

Fits 2017-2024 Chevrolet Camaro ZL1 (V8-6.2L).

The aFe Power Momentum GT Pro DRY S cold air intake system is engineered to maximize airflow and thermal efficiency for the supercharged V8-6.2L engine. This system features a unique, one-piece high-quality housing manufactured from heat-resistant cross-linked polyethylene (XLPE). The roto-molded design eliminates multiple components, ensuring a cool, dense intake charge while a built-in clear sight window allows for quick filter inspections without disassembling the airbox.

The system utilizes a CAD-designed, dyno-tuned intake tube to achieve optimized power gains while maintaining an OE-style fit. Filtration is handled by a massive 9-inch tall Pro DRY S air filter, featuring three layers of progressive synthetic media that provide maximum convenience without the need for filter oil. The filter uses a unique interface to the housing, reducing hardware count and simplifying maintenance.

• One-piece sealed black XLPE housing with auxiliary air inlet
• Pro DRY S 3-layer synthetic oil-free filter media for easy maintenance
• CAD-designed roto-molded intake tube for optimized airflow
• Includes premium stainless steel T-bolt clamps and silicone couplings
• No cutting or drilling required on factory components
• Manufacturer Part Number: 51-74214

Note: This intake system is not currently CARB exempt and is not legal for sale in California or use on vehicles registered with the California DMV.

Fits 2020-2026 Ford F-250 and F-350 Super Duty models (V8-6.7L).

The aFe POWER Momentum HD Cold Air Intake System is engineered to maximize airflow and filtration for the 6.7L Power Stroke. This system utilizes a massive 9-inch tall, 360-degree radial flow air filter featuring oil-free Pro DRY S media. With three layers of progressive synthetic media, it provides high filtration efficiency and dust-holding capacity without the need for recharge oils, making it ideal for street and towing applications. The filter's inverted top increases surface area for longer service intervals, while reinforced metal prevents filter collapse under high-torque demand.

The intake features a one-piece sealed housing made from heat-resistant, cross-linked polyethylene (XLPE) to protect the intake charge from engine bay heat soak. aFe POWER's patented filter-to-housing interface (US PAT 9440175) reduces the total number of parts for a streamlined installation and allows for easy filter maintenance. A clear sight window provides a hassle-free way to inspect the filter without disassembling the system. The housing is designed to integrate with factory air scoops and includes an auxiliary air inlet for additional volume when needed.

• Filter Media: Pro DRY S oil-free 3-layer synthetic media for maximum convenience.
• Housing Material: Durable, heat-soak resistant cross-linked polyethylene (XLPE).
• Patented Design: Filter-to-housing interface (US PAT 9440175) simplifies maintenance and installation.
• Filter Specs: 9" tall radial flow filter with a 5-3/4" flange and reinforced metal structure.
• Hardware Included: High-quality stainless-steel clamps and a durable silicone coupling.
• Manufacturer Part Number: 50-70007D-1

Fits select 2019-2024+ Subaru Ascent and 2022-2024+ WRX models.

This Torque Solution Multi-Layer Stainless Steel (MLS) gasket is engineered to provide a high-pressure, leak-free seal for your vehicle's exhaust or turbocharger system. Designed to withstand the extreme thermal cycles and high-heat environments common in turbocharged FA24 engines, this MLS gasket offers superior durability and recovery compared to traditional composite or single-layer gaskets.

Constructed from high-grade stainless steel, this component provides excellent corrosion resistance and ensures a precise fit for maintenance or performance upgrades. It is a direct replacement for the factory unit, utilizing existing mounting points for a straightforward installation.

• Multi-layer stainless steel (MLS) construction for maximum sealing integrity
• Designed for high-heat and high-pressure turbocharged applications
• Corrosion-resistant material for extended service life
• Direct fitment for simplified installation
• Manufacturer Part Number: TS-EG-765

Fits 2024 Ford Mustang GT and Dark Horse models equipped with the 5.0L V8 engine.

The Roush Air Intake System is engineered to improve engine performance by reducing intake restriction and optimizing airflow into the 5.0L V8. This system replaces the restrictive factory air box with a high-flow design that provides a more direct path for cool, dense air to reach the throttle body. Designed for a precise fit, it utilizes factory mounting points for a straightforward installation that maintains underhood integrity.

• Direct-fit for 2024 Ford Mustang GT and Dark Horse (5.0L)
• Engineered to reduce intake pressure drop and improve airflow efficiency
• CAD-designed for a factory-quality fit and finish
• Includes all necessary hardware for a complete installation
• Manufacturer Part Number: 422334

Fits K&N Orion and Apollo air intake systems.

The K&N Apollo Universal Parts Kit (A2053-RC5052) provides the necessary hardware to integrate vacuum-related accessories into your intake system. This kit is designed for plumbing smog tubes, crankcase ventilation (CCV) lines, or other vacuum sources directly into the intake tract or filter base.

Engineered for versatility, this kit allows for a professional-grade installation of ventilation tubes. To install, the user must create a 1/4-inch NPT threaded fitting in the filter base, valve cover, or desired assembly point to ensure a secure, airtight connection.

• Designed for K&N Orion and Apollo air intake systems
• Facilitates connection for smog and crankcase ventilation (CCV) tubes
• Requires creation of a 1/4-inch NPT threaded fitting for installation
• Ensures proper routing for vacuum-related accessories
• Manufacturer Part Number: A2053-RC5052

Fits 2016-2018 Ford Focus RS models.

The Cobb Sound Suppression Chamber is designed to eliminate the high-pitched resonance or "whistling" noise that often occurs when installing an aftermarket intake or increasing boost levels on the Ford Focus RS. This resonance is a byproduct of the factory turbocharger's bypass valve tract and can be distracting during spirited driving.

CNC-machined from high-grade billet aluminum and finished in black anodizing, this chamber bolts directly to the turbo compressor housing in place of the factory plastic unit. It maintains proper airflow dynamics while effectively dampening unwanted acoustic frequencies without negatively impacting performance or throttle response.

• Direct replacement for the factory plastic suppression chamber
• CNC-machined billet aluminum construction for durability
• Black anodized finish for corrosion resistance
• Includes pre-installed O-ring for a leak-free seal
• Maintains factory-like fitment and utilizes OE mounting points
• Manufacturer Part Number: 894600

Fits 2005-2007 Ford F-250/F-350 Super Duty and 2005 Ford Excursion (6.0L).

The Banks Power High-Ram intake system (MPN 42751) eliminates the primary bottleneck in your Power Stroke's induction system. While the factory inlet elbow is cramped and angular, the High-Ram uses a streamlined cast-metal design to significantly improve airflow from the intercooler to the cylinders. This efficiency gain results in up to a 64% reduction in pressure loss, providing greater air density for improved throttle response and fuel economy.

This system includes a 3.5-inch constant-diameter, mandrel-bent boost tube. By maintaining a uniform diameter, it ensures air flows from the intercooler without the turbulence or restriction found in stock components. The increased flow efficiency allows for higher boost levels without the drawback of excessive turbine backpressure.

• Delivers up to a 64% reduction in pressure loss compared to stock components
• Includes a 3.5-inch internal diameter mandrel-bent boost tube
• Cast-metal High-Ram intake manifold with a durable red powdercoat finish
• Improves air density and oxygen-rich airflow for better combustion
• Enhances throttle response and overall fuel efficiency
• Designed for use with the stock intercooler

Included: High-Ram intake elbow, 3.5-inch boost tube, and all necessary hardware for installation.

Fits select 2013-2025 Lexus GS350, RC300, and RC350 models (3.5L).

The Takeda Retain Stage-2 Intake System is engineered to optimize airflow and engine performance, delivering gains of up to 9 HP and 9 lbs. x ft. of torque. This system outflows the factory intake by 24%, utilizing a high-flow Pro 5R air filter with five layers of progressively finer medical-grade gauze media for maximum filtration and performance. The system features a one-piece powder-coated heat shield that isolates the filter from engine heat, ensuring a cooler, denser air charge.

• Pro 5R 5-layer washable/reusable performance air filter
• Mandrel-bent intake tubing maintains consistent diameters for smooth airflow
• One-piece heat shield requires no assembly and bolts to factory mounting points
• 3-angle adapter increases air velocity for improved throttle response
• Includes all necessary hardware for a complete installation
• Manufacturer Part Number: TR-2015B-1R

Fits 2016-2021 Toyota Tacoma models (V6-3.5L).

The aFe Power Momentum GT Dynamic Air Scoop (MPN 54-76005-S) is engineered to enhance your intake efficiency by capturing cool, high-pressure air from the front of the vehicle and directing it into the intake system. This additional air volume helps lower intake temperatures and improve throttle response by ensuring your V6 engine isn't limited to air drawn from inside the engine bay.

Constructed from high-quality, heat-resistant roto-molded plastic, this air scoop is CAD-designed to integrate perfectly with your vehicle's existing hardware. The durable one-piece design ensures long-lasting performance under the hood while maintaining a factory-style appearance. Installation is straightforward and hassle-free, requiring no permanent modifications.

• Directs ambient air from the front grille into the intake system for improved efficiency
• CAD-designed roto-molded construction for maximum durability and precise fitment
• Seamlessly integrates with Momentum GT intake systems
• Simple, hassle-free installation using existing factory mounting points
• Specifically engineered for 2016-2021 Toyota Tacoma V6-3.5L
• Manufacturer Part Number: 54-76005-S

Fits 2016-2023 Toyota Tacoma (V6-3.5L).

The aFe Power Momentum GT Stage-2 cold air intake system is engineered using advanced CAD tools to provide a precise fit and maximum airflow for the 3.5L V6 Tacoma. This system features a unique one-piece sealed housing with a patent-pending filter-to-housing interface, which reduces the number of parts for a simpler installation and a secure seal. The housing includes a clear sight window for easy filter inspection and a tire-tread design top for a rugged, off-road aesthetic.

To ensure consistent performance, the system uses a dyno-tuned, rotomolded intake tube that replaces restrictive factory ducting. This kit is equipped with the Pro DRY S air filter, featuring three layers of oil-free synthetic media for high filtration efficiency and maximum convenience. It installs directly to factory mounting points without the need for drilling or cutting.

• Pro DRY S Filter: Three-layer oil-free synthetic media provides high airflow and easy cleaning.
• One-Piece Housing: Heat-resistant rotomolded housing protects the air charge from engine bay heat soak.
• Rotomolded Tube: CAD-designed intake tube maintains consistent diameters to optimize air velocity.
• Hassle-Free Install: Bolts directly to factory locations with all necessary premium hardware included.
• MPN: 51-76005

Fits select 1999-2006 Chevrolet Silverado 1500 and GMC Sierra 1500 (4.3L).

Engineer superior performance and engine protection into your GM truck with the Volant Pro5 Closed Box Air Intake System. This system (MPN 15843) is designed to replace the restrictive factory airbox with a rugged, sealed housing that shields the filter from engine heat and road debris, ensuring a cooler, denser air charge for improved throttle response and power.

At the core of this system is Volant’s Pro5 high-performance air filter. Featuring five layers of oiled cotton gauze pleated between a top and bottom aluminum screen, the Pro5 filter provides 98% filtration efficiency and a massive increase in flow over stock paper filters. The innovative smoked acrylic lid allows for effortless visual inspections of the filter condition without removing any hardware.

• Part Number: 15843
• Filter Media: Pro5 oiled 5-layer cotton gauze (washable and reusable)
• Thermal Protection: Rugged closed box design prevents heat soak
• Service Interval: Maintenance required only every 40,000 miles (depending on conditions)
• Easy Inspection: Includes a smoked acrylic see-through airbox lid
• Installation: Direct bolt-on design; installs in under one hour with basic tools
• Compliance: CARB Approved for emissions-legal performance

Fits 2022-2026 Hyundai Elantra N Base models. This Takeda Stage-2 cold air intake system is engineered to optimize airflow and thermal management for your Elantra N, utilizing a sealed housing design and high-performance filtration.

The system features a one-piece housing manufactured from heat-resistant cross-linked polyethylene (XLPE), which minimizes heat soak and includes a patent-pending filter-to-housing interface for a simplified, secure installation. A built-in clear sight window allows for quick filter inspections without requiring disassembly of the intake. The included Takeda Pro 5R air filter utilizes five layers of progressively finer cotton gauze media to provide maximum airflow for street and track applications.

• Pro 5R Filtration: 360-degree radial flow filter with 6-inch height, 4-1/2 inch flange, and inverted top for increased surface area.
• Durable Construction: Dyno-tuned XLPE intake tube and housing offer superior heat resistance and durability.
• Complete Hardware Kit: Includes stainless-steel clamps, reinforced silicone couplings, and billet aluminum fittings to accommodate factory connections.
• Quick Installation: Designed for a straightforward bolt-on process taking approximately 20 minutes with minimal hardware.
• Manufacturer Part Number: 56-10057R

This intake is compatible with the optional Takeda Turbo Inlet (PN 59-20002) to further reduce intake restrictions and smooth the transition from the intake tube to the turbocharger.

Fits 2014-2017 Infiniti QX80 (5.6L).

The aFe Power Momentum GT Stage-2 intake system is engineered to maximize airflow and performance for your vehicle. This system features a unique, one-piece roto-molded housing crafted from heat-resistant cross-linked polyethylene (XLPE), ensuring a cool intake charge. A built-in clear sight window allows for quick filter inspections without disassembling the air box. The CAD-designed, dyno-tuned intake tube includes an integrated resonance chamber to minimize unwanted intake noise while maintaining a precise fit.

At the core of this system is the Pro DRY S air filter, featuring three layers of progressively finer porosity synthetic media. This oil-free design offers maximum convenience and high filtration efficiency. The patent-pending housing-to-filter interface allows for a larger filter surface area, increasing air volume and simplifying installation. The filter is reinforced with metal to prevent collapse under high vacuum.

• Pro DRY S Filter: 9-inch oval 360-degree radial flow filter with oil-free 3-layer synthetic media
• One-Piece Sealed Housing: Heat-resistant black XLPE construction with auxiliary air scoop and urethane plug
• Durable Intake Tube: Roto-molded plastic with built-in resonance chamber
• Premium Hardware: Includes stainless steel clamps and a heavy-duty silicone coupling
• Easy Maintenance: Clear sight window for instant filter status checks
• Manufacturer Part Number: 51-76104

Fits 2019-2026 Hyundai Elantra N, Kona N, and Veloster N (L4-2.0L).

The aFe Power Silver Bullet throttle body spacer is engineered to improve horsepower, torque, and throttle response by optimizing the airflow into your intake manifold. Featuring a unique Serrated/Helix combination design, this spacer creates air turbulence that better atomizes the fuel-air mixture for a more complete combustion cycle. This specialized design also helps eliminate the annoying intake whistle often associated with helix-only spacers.

Precision CNC-machined from high-strength 6061-T6 billet aluminum, this kit provides a perfect fit and long-lasting durability. The installation is straightforward, utilizing factory mounting locations and the included high-quality hardware and O-ring seal to ensure a leak-free fit.

• Serrated/Helix entry design increases air speed and reduces intake whistle
• CNC-machined from 6061-T6 billet aluminum for strength and weight savings
• Increases turbulence for a more complete combustion cycle
• Includes premium O-ring seal and all necessary installation hardware
• Utilizes factory mounting points for a hassle-free install
• Manufacturer Part Number: 46-30007

Fits 2022+ Subaru WRX and 2019-2023 Subaru Ascent.

The Torque Solution Titanium Top Mount Charge Pipe is designed to replace the restrictive and failure-prone factory plastic and rubber plumbing. Engineered from high-grade titanium, this pipe eliminates the expansion common in OEM components under boost, ensuring a consistent, high-velocity airflow path to the intercooler. The burnt blue finish provides a premium custom aesthetic while offering excellent resistance to corrosion and heat soak.

• Fabricated from lightweight, high-strength titanium
• Distinctive burnt blue finish for a custom engine bay look
• Direct-fit replacement for the factory top mount charge pipe
• Maintains structural integrity under high boost pressures
• Improves throttle response by reducing airflow turbulence
• Manufacturer Part Number: TS-SU-812BU

Fits 2014-2019 Chevrolet Corvette Stingray, Grand Sport, and ZR1 models (6.2L).

The K&N 63-3081 AirCharger intake system is engineered to replace the restrictive factory air filter and intake housing, significantly reducing intake restriction to smooth and straighten airflow. This allows the 6.2L V8 engine to inhale a larger volume of air, providing usable power gains and improved acceleration throughout the RPM range.

This system features an ultra-lightweight, high-flow carbon fiber air filter and a specialized heat shield designed to fit into the original air box location. The aerodynamically engineered intake tube connects directly to the engine's throttle body and includes integrated mounting points for the factory mass air flow (MAF) sensor and crankcase vent hose. This kit is designed for a straightforward installation using existing factory mounting points, typically completed in 90 minutes or less with standard tools.

• Series: K&N AirCharger Performance
• MPN: 63-3081
• Filter Material: High-flow carbon fiber
• Service Interval: Filter lasts up to 100,000 miles before cleaning is required (depending on conditions)
• Warranty: K&N Million Mile Limited Warranty
• Emissions Note: Not legal for sale or use in California or states adopting California emissions standards

Fits 2019-2024 Ram 3500 models equipped with the 6.7L Cummins diesel engine.

The Banks Monster-Ram Intake System solves the "killer grid heater" issue while significantly improving airflow to your Cummins engine. By replacing the failure-prone factory grid heater with a Banks high-flow intake plate and a high-flow coil heater, this system eliminates the risk of heater bolt failure entering the cylinders. This 50-state emissions-compliant elbow outflows the stock unit by 88.3%, optimizing air pressure and distribution for improved throttle response and efficiency.

• Prevents engine damage by replacing the factory grid heater with a high-flow intake plate
• Outflows the stock intake system by 88.3%
• Includes proprietary fuel line for a complete installation
• Features a 3-3/8 inch inlet for maximum air volume
• Four 1/8 inch NPT ports for accessories or sensors
• Natural cast finish for a rugged, industrial look
• Maintains all factory mounting points
• Manufacturer Part Number: 42805-N

Fits 2023-2025 Ford F-150 Raptor (V8-5.2L Supercharged).

The aFe POWER Track Series intake system (MPN 57-10030K) is a performance-focused induction solution engineered to optimize airflow for the supercharged V8 Raptor. This system features a dyno-tuned, 100% carbon fiber intake tube that is lightweight, resists heat soak, and provides a smooth path for filtered air to reach the engine. The open-element design is housed in high-quality XLPE (cross-linked polyethylene) that utilizes the factory air inlet and an integrated scoop to capture cool air directly from the radiator support.

• High-Flow Black Pro 5R Filter: A 9-inch tall, 360-degree radial flow filter featuring five layers of pre-oiled progressively finer cotton gauze media for maximum performance.
• 100% Carbon Fiber Tube: Lightweight twill-weave carbon fiber construction (no fiberglass) designed to reduce weight and improve engine bay aesthetics.
• XLPE Open-Element Housing: Durable polymer housing minimizes warm engine air intake while delivering a more aggressive induction sound.
• Performance Hardware: Includes premium stainless-steel clamps and silicone couplings to ensure a secure, pressure-tight seal.
• Easy Installation: A direct bolt-on system that utilizes factory mounting locations with no cutting or drilling required.

Fits 2022-2026 Honda Civic LX, Sport, and Type R (2.0L).

The aFe Takeda Momentum Cold Air Intake System is engineered to optimize airflow and simplify maintenance for your Civic. Featuring a unique filter-to-housing interface, this system uses a one-piece sealed housing made from heat-resistant cross-linked polyethylene (XLPE). This design minimizes hardware for a straightforward bolt-on installation while protecting the intake charge from engine bay heat. A built-in clear sight window allows for quick filter inspections without disassembling the airbox.

The system includes a 9-inch tall, 360-degree radial flow Pro DRY S air filter. This oil-free, 3-layer synthetic media provides maximum convenience and excellent filtration efficiency for street use. The intake is completed with a dyno-tuned XLPE intake tube, high-quality stainless steel clamps, and a premium silicone coupler for a secure, durable seal under vacuum and heat.

• One-piece sealed XLPE housing with patent-pending filter-to-housing interface
• Pro DRY S oil-free 3-layer synthetic media air filter for easy maintenance
• 9" tall radial flow filter with 3.5" flange and inverted top for increased surface area
• Dyno-tuned XLPE intake tube ensures optimal air velocity and fitment
• Clear sight window for effortless filter monitoring
• Includes stainless steel clamps and premium silicone couplings
• Manufacturer Part Number: 56-70068D

Fits 2009-2017 Toyota Land Cruiser LC70 (V6-4.0L).

The aFe Power Momentum GT Pro 5R intake system is engineered to maximize airflow and filtration for the 4.0L V6 Toyota Land Cruiser. This system features a unique one-piece housing made from heat-resistant black cross-linked polyethylene (XLPE) that replaces the restrictive factory airbox. A built-in clear sight window allows for quick filter inspections without disassembling the housing, while an auxiliary air inlet provides additional airflow (includes a urethane plug for sealing when desired).

At the core of this system is the Pro 5R performance air filter. This large, 9-inch tall 360-degree radial flow filter features five layers of progressively finer mesh cotton gauze oiled media, providing maximum performance and protection. The CAD-designed, roto-molded intake tube is dyno-tuned to ensure optimal air velocity and a precise fit.

• Filter Media: 5-layer Pro 5R oiled cotton gauze for maximum airflow
• Housing Material: Durable black cross-linked polyethylene (XLPE)
• Filter Dimensions: 6-3/4" x 4-3/4" oval flange, 9" height with inverted top
• Installation: Direct bolt-on using premium hardware; no cutting or drilling required
• Interface: Patent-pending filter-to-housing interface for simplified installation
• MPN: 54-76008