The OEM diameter and we experienced a 25HP Gain with our 4 in. turbo inlet when used with a Max Effort Tune. High quality hardware, silicone boot, seals, and stainless steel t-bolt clamps ensure optimum durability and ease of installation. Removable air box lid element allows for easy visual inspection and maintenance of your WCFab filter with included hydrophobic pre-filter cover, to help keep your MAF sensor, turbo, and engine airways contaminant free. After the turbo, our Stage 2 kit also upgrades the restricted 2-piece, resonator equipped, 2.5 in. diameter driver (hot) side intercooler pipe and leak-prone 2-piece plastic / rubber passenger (cold) side pipe with WCFab's heavy duty 3 in. diameter 1-piece Driver (Hot) Side and 3.5 in. diameter Passenger (Cold) Side L5P Intercooler Pipes. Made in the USA from high strength, heavy duty 14 ga. aluminum tube with smooth, aerodynamic mandrel bends for increased durability and optimized flow. 3 in. Driver Side pipe eliminates

• OEM Clip Ring Design at Y-bridge connection replaced by high quality silicone boot and stainless steel t-bolt clamps for improved sealing and ability to hold higher boost pressures without leaking
• 4 in. Aluminum intake pipe with Air box enclosure, dry filter assembly and Outerwears pre-filter cover, 4 in. Intake horn with PCV port and Surge Ring
• CNC Machined Flange with Double O-Rings provides an improved sealing surface to eliminate boost leaks.
• Silicone Boots, Stainless Steel T-Bolt Clamps, O-Rings, Intercooler Outlet Clip, Installation Hardware
• Will fit on stock truck no other modifications or upgrades necessary!
• 3 in. Hot Side Intercooler Pipe & 3.5 in. Cold Side Intercooler Pipe
• Retains factory connection points and sensors
• NO Tuning required, bolt on!
• Custom Powder Coat Finish
• Made In the USA

This Part Fits:

The OEM diameter and we experienced a 25HP Gain with our 4 in. turbo inlet when used with a Max Effort Tune. High quality hardware, silicone boot, seals, and stainless steel t-bolt clamps ensure optimum durability and ease of installation. Removable air box lid element allows for easy visual inspection and maintenance of your WCFab filter with included hydrophobic pre-filter cover, to help keep your MAF sensor, turbo, and engine airways contaminant free. After the turbo, our Stage 2 kit also upgrades the restricted 2-piece, resonator equipped, 2.5 in. diameter driver (hot) side intercooler pipe and leak-prone 2-piece plastic / rubber passenger (cold) side pipe with WCFab's heavy duty 3 in. diameter 1-piece Driver (Hot) Side and 3.5 in. diameter Passenger (Cold) Side L5P Intercooler Pipes. Made in the USA from high strength, heavy duty 14 ga. aluminum tube with smooth, aerodynamic mandrel bends for increased durability and optimized flow. 3 in. Driver Side pipe eliminates

• OEM Clip Ring Design at Y-bridge connection replaced by high quality silicone boot and stainless steel t-bolt clamps for improved sealing and ability to hold higher boost pressures without leaking
• 4 in. Aluminum intake pipe with Air box enclosure, dry filter assembly and Outerwears pre-filter cover, 4 in. Intake horn with PCV port and Surge Ring
• CNC Machined Flange with Double O-Rings provides an improved sealing surface to eliminate boost leaks.
• Silicone Boots, Stainless Steel T-Bolt Clamps, O-Rings, Intercooler Outlet Clip, Installation Hardware
• Will fit on stock truck no other modifications or upgrades necessary!
• 3 in. Hot Side Intercooler Pipe & 3.5 in. Cold Side Intercooler Pipe
• Retains factory connection points and sensors
• NO Tuning required, bolt on!
• Custom Powder Coat Finish
• Made In the USA

This Part Fits:

Stage 1 upgrade for the 2020-2025 L5P Duramax improves airflow between the turbo and engine for improved efficiency, throttle response, and turbo spool up. Eliminates weak points in the factory design that can lead to boost leaks or complete failures in hard working and high performance applications. - Kit replaces the restricted 2-piece, resonator equipped, 2.5 in. diameter driver (hot) side intercooler pipe and leak-prone 2-piece plastic / rubber passenger (cold) side pipe with WCFab's heavy duty 3 in. diameter 1-piece Driver (Hot) Side and 3.5 in. diameter Passenger (Cold) Side L5P Intercooler Pipes. Made in the USA from high strength, heavy duty 14 ga. aluminum tube with smooth, aerodynamic mandrel bends for increased durability and optimized flow. 3 in. Driver Side pipe eliminates the OEM resonator and middle boot joint for improved flow and durability and includes high quality reinforced silicone boots and stainless t-bolt clamps for superior temperature resistance and boost pressure holding capabilities. 3.5" Passenger Side pipe features a CNC machined flange with a double o-ring seal and an upgraded silicone boot in order to withstand higher boost pressures than the factory components to increase reliability and eliminate blown factory boots and horsepower robbing boost leaks. Full assembly finished in your choice of WCFab's signature custom powder coat colors for a look as unique as your truck. Installs with basic hand tools. Compatible with stock trucks, no tuning required. Saves $25 vs. buying individually.

• OEM Clip Ring Design at Y-bridge connection replaced by high quality silicone boot and stainless steel t-bolt clamps for improved sealing and ability to hold higher boost pressures without leaking
• CNC Machined Flange with Double O-Rings provides an improved sealing surface to eliminate boost leaks.
• Silicone Boots, Stainless Steel T-Bolt Clamps, O-Rings, Intercooler Outlet Clip
• Will fit on stock truck no other modifications or upgrades necessary!
• 3 in. Hot Side Intercooler Pipe & 3.5 in. Cold Side Intercooler Pipe
• Retains factory connection points and sensors
• NO Tuning required, bolt on!
• Custom Powder Coat Finish
• Made In the USA

This Part Fits:

Stage 1 upgrade for the 2020-2025 L5P Duramax improves airflow between the turbo and engine for improved efficiency, throttle response, and turbo spool up. Eliminates weak points in the factory design that can lead to boost leaks or complete failures in hard working and high performance applications. - Kit replaces the restricted 2-piece, resonator equipped, 2.5 in. diameter driver (hot) side intercooler pipe and leak-prone 2-piece plastic / rubber passenger (cold) side pipe with WCFab's heavy duty 3 in. diameter 1-piece Driver (Hot) Side and 3.5 in. diameter Passenger (Cold) Side L5P Intercooler Pipes. Made in the USA from high strength, heavy duty 14 ga. aluminum tube with smooth, aerodynamic mandrel bends for increased durability and optimized flow. 3 in. Driver Side pipe eliminates the OEM resonator and middle boot joint for improved flow and durability and includes high quality reinforced silicone boots and stainless t-bolt clamps for superior temperature resistance and boost pressure holding capabilities. 3.5" Passenger Side pipe features a CNC machined flange with a double o-ring seal and an upgraded silicone boot in order to withstand higher boost pressures than the factory components to increase reliability and eliminate blown factory boots and horsepower robbing boost leaks. Full assembly finished in your choice of WCFab's signature custom powder coat colors for a look as unique as your truck. Installs with basic hand tools. Compatible with stock trucks, no tuning required. Saves $25 vs. buying individually.

• OEM Clip Ring Design at Y-bridge connection replaced by high quality silicone boot and stainless steel t-bolt clamps for improved sealing and ability to hold higher boost pressures without leaking
• CNC Machined Flange with Double O-Rings provides an improved sealing surface to eliminate boost leaks.
• Silicone Boots, Stainless Steel T-Bolt Clamps, O-Rings, Intercooler Outlet Clip
• Will fit on stock truck no other modifications or upgrades necessary!
• 3 in. Hot Side Intercooler Pipe & 3.5 in. Cold Side Intercooler Pipe
• Retains factory connection points and sensors
• NO Tuning required, bolt on!
• Custom Powder Coat Finish
• Made In the USA

This Part Fits:

WCFab 2017-2019 GM L5P 6.6L Duramax 4" Intake Kit with Air Box. This high flow, fabricated aluminum intake pipe and air box enclosure with dry filter assembly replaces the restrictive plastic factory parts on your diesel for improved engine performance. All new design significantly increases air flow to your turbo producing improved horsepower and torque, quicker throttle response, and cooler intake temperatures by drawing cold air through the hood Ram Air duct and inner fender. All aluminum construction features large diameter 4" piping with smooth aerodynamic bends to improve intake air velocity, volume, and provide more aggressive engine and turbo sound during acceleration. High quality hardware, silicone boot, seals, and stainless steel t-bolt clamps ensure optimum durability and ease of installation. Removable air box lid elementallows for easy visual inspection and maintenance of your WCFab filter with included hydrophobic pre-filter cover, to help keep your MAF sensor, turbo, and engine airways contaminant free. The critical ram air duct seal has been moved to the bottom of the hood for a clean engine compartment appearance. Full assembly finished in your choice of WCFab's signature custom powder coat colors for a look as unique as your truck.

• Compatible with stock trucks. No other modifications or upgrades necessary!
• Seal for Connection to Functional Ram Air Port on Hood
• Aluminum Air Box Enclosure with Lid
• Custom Single Stage Powder Coating
• Stainless Steel T-Bolt Clamps
• Outerwear's Pre-Filter Cover
• No Tuning Required, Bolt On!
• High Quality Silicone Boot
• 4" Intake Pipe
• Dry Air Filter

This Part Fits:

WCFab 2017-2019 GM L5P 6.6L Duramax 4" Intake Kit with Air Box. This high flow, fabricated aluminum intake pipe and air box enclosure with dry filter assembly replaces the restrictive plastic factory parts on your diesel for improved engine performance. All new design significantly increases air flow to your turbo producing improved horsepower and torque, quicker throttle response, and cooler intake temperatures by drawing cold air through the hood Ram Air duct and inner fender. All aluminum construction features large diameter 4" piping with smooth aerodynamic bends to improve intake air velocity, volume, and provide more aggressive engine and turbo sound during acceleration. High quality hardware, silicone boot, seals, and stainless steel t-bolt clamps ensure optimum durability and ease of installation. Removable air box lid elementallows for easy visual inspection and maintenance of your WCFab filter with included hydrophobic pre-filter cover, to help keep your MAF sensor, turbo, and engine airways contaminant free. The critical ram air duct seal has been moved to the bottom of the hood for a clean engine compartment appearance. Full assembly finished in your choice of WCFab's signature custom powder coat colors for a look as unique as your truck.

• Compatible with stock trucks. No other modifications or upgrades necessary!
• Seal for Connection to Functional Ram Air Port on Hood
• Aluminum Air Box Enclosure with Lid
• Custom Single Stage Powder Coating
• Stainless Steel T-Bolt Clamps
• Outerwear's Pre-Filter Cover
• No Tuning Required, Bolt On!
• High Quality Silicone Boot
• 4" Intake Pipe
• Dry Air Filter

This Part Fits:

WCFab 2011-2016 GM LML 6.6L Duramax 4" Intake Kit with Air Box. This high flow, fabricated aluminum intake pipe and air box enclosure with dry filter assembly replaces the restrictive plastic factory parts on your diesel for improved engine performance. All new design significantly increases air flow to your turbo producing improved horsepower and torque, quicker throttle response, and cooler intake temperatures by drawing cold air through the inner fender. All aluminum construction features large diameter 4" piping with smooth aerodynamic bends to improve intake air velocity, volume, and provide more aggressive engine and turbo sound during acceleration. High quality hardware, silicone boot, seals, and stainless steel t-bolt clamps ensure optimum durability and ease of installation. Removable air box lid elementallows for easy visual inspection and maintenance of your WCFab filter with included hydrophobic pre-filter cover, to help keep your MAF sensor, turbo, and engine airways contaminant free. Full assembly finished in your choice of WCFab's signature custom powder coat colors for a look as unique as your truck.

• Silicone Boot & Stainless Steel T-Bolt Clamps
• Installs Easily with Basic Hand tools
• Includes Installation Hardware
• Outerwear's Pre-Filter Cover
• No Tuning Required, Bolt On!
• Custom powder coat finish
• Air Box with Lid
• 4" Intake Pipe
• Dry Air Filter
• Made in USA

This Part Fits:

This LBZ 3" Y-Bridge Kit is an upgraded high flow intake kit for the 2006-2007 LBZ Duramax which replaces the OEM upper intake manifold supplying air to the engine intake runners. The OEM Y-bridge for these trucks is a poorly designed, slip-fit style two piece bridge with very little support and is prone to blowing apart under boost on hard working and high performance trucks creating poor drivability and decreased power. This kit is a much improved, high flow, bolt together style two piece 3" bridge which provides a secure sealing surface where the air inlet horn connects to the bridge. 3" high flow upper and lower intercooler pipes feature smooth flowing mandrel bends, CNC machined billet flanges and perfectly compliment the y-bridge to offer a full 3" tract from intercooler pipe slip connection to the engine incorporating the factory grid heater and EGR connection controls. Compatible with OEM lower passenger side intercooler pipe as well as our upgraded 3.5" High Flow Passenger Side Intercooler Pipe Kit WCF100367. Finished in your choice of custom powder colors. This product is compatible with stock trucks requiring no additional modifications, upgrades, or tuning for installation. Pairs best with emissions compliant tuning and drop in turbochargers for optimum performance gains.

• Includes High Quality Silicone Boot, Stainless Steel T-Bolt Clamps, MAP Sensor Seal, New O-Ring Seals for Bridge, Grid Heater & EGR Flanges, New Up Pipe to EGR Gasket and Grid Heater Install Hardware
• Compatible with stock trucks. No other modifications or upgrades necessary!
• Eliminates restrictions and known failure points in OEM design
• WCFab's Signature 3" Two Piece Y-Bridge
• 36% Improvement in Air Flow Over Stock
• 3" Upper Intercooler Crossover Pipe
• No Tuning Required, Bolt On!
• 3" Lower Intercooler Pipe
• Custom Powder Coat Finish
• Made in USA

This Part Fits:

This Part Fits:

This Part Fits:

This Part Fits:

This Part Fits:

This Part Fits:

This Part Fits:

This Part Fits:

This Part Fits:

This Part Fits:

This Part Fits:

This Part Fits:

This Part Fits:

This Part Fits:

This Part Fits:

This Part Fits:

This Part Fits:

This Part Fits:

This Part Fits:

This Part Fits: