Fits 2018-2023 BMW M550i xDrive Base.

The Dinan Freeflow Axleback Exhaust System (D660-0075-BLK) is engineered to optimize exhaust flow by reducing back pressure, providing a refined yet aggressive tone for the G30 M550i. By retaining the factory computer-controlled exhaust valves, this system maintains civilized sound levels during low-speed driving while opening fully under high-load conditions for maximum performance. This axleback system incorporates specialized drone abatement technology to ensure the cabin remains quiet and free of low-RPM resonance.

Constructed entirely from 304 stainless steel, the Freeflow system is built for long-term durability and corrosion resistance. It features four massive 4-inch diameter, double-walled, ceramic black tips with laser-engraved Dinan logos for a premium aesthetic. This is a direct bolt-on upgrade that includes all necessary mounting hardware for a straightforward installation.

• Retains factory computer-controlled exhaust valves for sound flexibility
• Drone abatement technology reduces cabin resonance at highway speeds
• 100% 304 stainless steel construction
• Four 4-inch double-walled ceramic black laser-engraved tips
• Performance gains: +8 HP and +6 LB-FT @ 6600 RPM
• Easy bolt-on installation with included hardware
• Manufacturer Part Number: D660-0075-BLK

Fits 2015-2020 BMW M3 and M4 (Base, CS, and GTS).

The Dinan Freeflow Axleback Exhaust System (D660-0050-BLK) is engineered to enhance the acoustics and performance of the F8x chassis. Constructed from 100% 304 stainless steel, this system uses computer-controlled valves to provide a civilized tone during low-speed cruising and a free-flowing, aggressive note under high-load conditions. The twin 76mm secondary valves are 45% less restrictive than the OE components, contributing to a measured gain of +5 horsepower while reducing overall weight by 3 lbs compared to the factory unit. This system integrates drone abatement technologies to maintain cabin comfort and retains full M-Drive exhaust tone functionality.

• 100% 304 stainless steel construction for maximum corrosion resistance
• Twin 76mm secondary exhaust valves (45% less restrictive than OE)
• Quad 3.5-inch laser-engraved tips with a black ceramic coating
• Direct bolt-on installation using factory brackets, hangers, and actuators
• Drone abatement technology reduces cabin resonance
• Weight reduction: 3 lbs lighter than stock exhaust
• Performance increase: +5 horsepower
• MPN: D660-0050-BLK

Fits 2007-2011 BMW 335i, 335i xDrive, and 335xi Base models.

The Dinan Freeflow Axle-Back exhaust system for the E90-platform 335i improves engine efficiency by reducing back pressure. This results in a measured increase in power and a refined, sporty exhaust note that remains civilized during daily driving while providing an aggressive tone under load. Constructed entirely from 304 stainless steel, this system is engineered for long-term corrosion resistance and precise fitment using factory brackets and hangers.

Dinan utilizes proprietary drone abatement technologies to minimize cabin resonance, ensuring the increased sound volume does not compromise interior comfort. This system is significantly lighter than the factory muffler assembly and is finished with dual 3.5-inch laser-engraved polished tips.

• Direct bolt-on replacement using factory hangers and brackets
• Performance gains: +6 HP @ 6600 RPM, +5 LB-FT @ 6600 RPM
• 100% 304 stainless steel construction for maximum durability
• Dual 3.5-inch laser-engraved polished stainless steel tips
• Integrated drone abatement technology reduces interior resonance
• Lighter than the factory exhaust system
• Manufacturer Part Number: D660-0012

Fits 2014-2019 Chevrolet Corvette C7 models, including Stingray, Grand Sport, Z06, and ZR1.

The AWE Track Edition Axle-Back Exhaust is the lightest and most aggressive exhaust solution for the C7 Corvette. Engineering for maximum volume, this system replaces the mufflers with 3-inch straight-pipe sections, delivering a raw, unbaffled exhaust note that is not for the faint of heart. Each system is handcrafted from U.S.-sourced T304L stainless steel with .065-inch wall thickness and CNC mandrel bends to ensure optimal flow and precision fitment.

This kit includes AWE AFM Valve Simulators, which are essential for 2014-2019 Corvette models equipped with Active Fuel Management. These CNC laser-cut stainless steel brackets allow the factory AFM valve motors to remain plugged in and operational, preventing a Check Engine Light (CEL) while allowing for a full 3-inch straight-through exhaust path. The system is finished with quad 4.5-inch double-walled, slash-cut tips in Diamond Black that are individually adjustable for depth.

• Peak gains of 18 hp and 16 lb-ft of torque at the wheels
• Max gains of 22 hp @ 6400 rpm and 20 lb-ft of torque @ 4000 rpm
• 3-inch U.S.-sourced CNC mandrel-bent .065" wall T304L stainless steel construction
• Includes AFM Valve Simulators to maintain factory ECU operation and avoid CELs
• Quad 4.5-inch double-walled slash-cut tips in Diamond Black
• Significant weight reduction compared to the factory exhaust system
• No-CEL Guarantee and Perfect Fitment Guarantee
• AWE Lifetime Exhaust Warranty
• Manufacturer Part Number: 3020-43081

Fits select 2014-2023 Lexus IS200t, IS250, IS300, and IS350 models (V6-3.5L).

Unlock the performance potential and acoustic profile of your Lexus with the aFe POWER Takeda axle-back exhaust system. This system is engineered using 2-1/2" mandrel-bent 304 stainless steel tubing for maximum flow and long-term corrosion resistance. On the dyno, this system produced documented gains of up to +13 HP and +14 lbs. x ft. torque, delivering a noticeable improvement in power delivery and throttle response.

The system features dual high-flow 304 stainless steel mufflers designed to produce a smooth, deep exhaust note without sacrificing cabin comfort. It is finished with dual 4-1/2" carbon fiber clamp-on tips that feature the aFe POWER logo for a refined look. Built for durability, the entire system is 100% MIG-welded and utilizes factory-style flanges and hangers for a direct bolt-on installation that requires no cutting or permanent vehicle modifications.

• Produces gains of up to +13 HP and +14 lbs. x ft. Torque
• Constructed from 2-1/2" mandrel-bent 304 stainless steel tubing
• Dual 4-1/2" diameter carbon fiber 304 stainless steel clamp-on exhaust tips
• Dual high-flow 304 stainless steel mufflers for a smooth, deep tone
• 100% MIG-welded for race-proven strength and structural integrity
• Utilizes factory-style flanges and hangers for a secure, direct fit
• Includes all necessary hardware for a complete installation
• Manufacturer Part Number: 49-36060-C

Fits 2012-2018 Subaru BRZ and Toyota 86.

The Remark Axle-Back Exhaust System (RO-TSZN-S) is a performance-oriented upgrade designed to replace the heavy, quiet factory mufflers with a high-flow system that delivers a crisp, aggressive exhaust note. This direct bolt-on solution is engineered for enthusiasts looking to improve vehicle acoustics and reduce weight without the complexity of a full cat-back installation. The system is finished with premium stainless steel single-wall tips that provide a clean, track-ready aesthetic while fitting perfectly within the factory rear bumper cutouts.

• Direct bolt-on installation using factory mounting points
• High-quality stainless steel construction for durability
• Polished stainless steel single-wall exhaust tips
• Noticeable weight reduction compared to the stock muffler assembly
• Includes all necessary hardware for a complete installation
• Manufacturer Part Number: RO-TSZN-S

Fits select 2006-2013 Chevrolet Corvette models, including Base, Grand Sport, Z06, and ZR1 (V8-6.2L / V8-7.0L).

Elevate the performance and acoustic profile of your C6 Corvette with the Kooks 3-inch Valved Axle-Back Exhaust system. Handcrafted in the USA from premium T304 aircraft-quality stainless steel, this system provides the durability required for both street and track environments. The integrated valving allows for adjustable exhaust notes, giving you control over the volume without sacrificing the high-flow characteristics of a full 3-inch mandrel-bent setup.

• 3-inch T304 stainless steel construction for maximum corrosion resistance and exhaust flow.
• Integrated valving system allows for sound profile adjustments.
• Hand-polished carbon fiber (CF) tips provide a modern, high-end aesthetic.
• Dyno-tested and race-proven design to optimize horsepower and torque.
• Direct-fit installation to factory-style mounting points.
• Manufactured in the USA by three generations of family leadership.
• Limited Lifetime Warranty for the original purchaser.
• Manufacturer Part Number: 21606750

Fits 1997-2004 Chevrolet Corvette Base, Z06, and 50th Anniversary models (5.7L).

The Corsa Xtreme Axle-Back Exhaust System is engineered for Corvette owners seeking an aggressive exhaust note without the trade-off of cabin resonance. Featuring patented Reflective Sound Cancellation (RSC) technology, this system (MPN: 14961) is acoustically tuned to eliminate drone frequencies at cruising speeds while delivering a sharp, powerful sound under load. This system is significantly lighter than the factory components and outflows the stock exhaust by up to 70%, improving throttle response and efficiency.

Built from premium 304 stainless steel for long-term durability and corrosion resistance, the kit includes quad dual-walled polished stainless steel tips for a refined aesthetic. The bolt-on design allows for a straightforward installation to factory mounting points with no welding required.

• Patented RSC Technology ensures a drone-free cruise
• 304 stainless steel construction for maximum corrosion resistance
• 70% flow increase over stock Corvette exhaust
• Quad dual-walled polished stainless steel tips
• Lightweight design improves overall vehicle weight distribution
• Easy bolt-on installation with no welding necessary
• Made in the U.S.A.
• Limited Lifetime Warranty

Fits 2018-2023 Suzuki Jimny 3-door 4WD models (1.4L) with manual or automatic transmissions. Please note: this vehicle is not available in North American markets.

Designed for off-road enthusiasts, the Borla High Clearance Climber / Rock Crawler catback exhaust system provides maximum ground clearance for overlanding and technical terrain. This system features the S-Type sound profile, engineered with advanced muffler technology to deliver a deep, aggressive exhaust note outside the cabin while maintaining a drone-free experience for the driver and passengers.

The system is constructed from premium, brushed T-304 stainless steel—a material superior to 400-series steel for long-term corrosion resistance and durability. Ultra-smooth mandrel-bent 2-inch tubing ensures maximum exhaust flow and optimized power delivery, while CNC manufacturing provides a precise, bolt-on fit. The system terminates with a 2-inch brushed T-304 stainless steel turn-down tip for a discreet, high-clearance exit.

• Manufacturer Part Number: 140924
• System Type: Catback Exhaust
• Series: S-Type High Clearance Climber / Rock Crawler
• Tubing Diameter: 2.0 inches
• Material: T-304 Stainless Steel
• Tip Description: 2.0-inch Turn Down (Brushed Finish)
• Warranty: Million-Mile Warranty (USA/Canada); 3-Year Limited (International)

Fits 2005-2008 Chevrolet Corvette Base (6.0L / 6.2L).

The AWE Touring Edition Axle-Back Exhaust is a premium 3-inch T304L stainless steel system engineered for the C6 Corvette. This system features AWE’s proprietary 180 Technology®, a drone-canceling solution that uses internal reflection to eliminate harsh frequencies. The result is a straight-through exhaust that delivers an aggressive sound under heavy throttle while maintaining a refined, drone-free cabin at cruising speeds.

Handcrafted in the USA from CNC mandrel-bent .065-inch wall tubing, this axle-back is a direct bolt-on upgrade that requires no cutting. It is designed with modularity in mind, ensuring a perfect fit with the factory X-pipe or the AWE aftermarket X-pipe.

• Max gains of +16 hp and +17 lb-ft of torque at the wheels (stock H-pipe)
• Max gains of +21 hp and +22 lb-ft of torque at the wheels (AWE X-pipe)
• Proprietary 180 Technology® drone-canceling resonators
• Quad 4.5-inch double-walled, slash-cut tips in Chrome Silver
• CNC mandrel-bent U.S.-sourced T304L stainless steel construction
• Direct bolt-on installation with no cutting or CEL guaranteed
• Includes AWE Lifetime Exhaust Warranty
• Manufacturer Part Number: 3015-42660

Fits 2014-2019 Chevrolet Corvette Stingray, Grand Sport, Z06, and ZR1 models.

The AWE Tuning Touring Edition Axle-Back Exhaust provides the ultimate sound profile for the C7 Corvette, blending a refined cabin experience with an aggressive external soundtrack. This system features AWE’s proprietary 180 Technology®, a drone-canceling solution that uses a straight-through design to eliminate resonance without the need for restrictive baffles or valves. Handcrafted from 3-inch U.S.-sourced CNC mandrel-bent T304L stainless steel, this axle-back system maximizes exhaust scavenging and increases power across the powerband.

For vehicles equipped with Active Fuel Management, this kit includes AWE AFM Valve Simulators, ensuring a full axle-back installation that won't trigger a Check Engine Light. The system is finished with massive 4.5-inch double-walled tips in a classic chrome silver finish, providing a significant aesthetic upgrade over the factory quad exit.

• Peak gains of 18 hp and 16 lb-ft of torque at the wheels
• Max gains of 22 hp @ 6400 rpm and 20 lb-ft @ 4000 rpm
• Patented 180 Technology® drone-canceling solution
• 3-inch U.S.-sourced CNC mandrel-bent .065-inch wall T304L stainless steel construction
• Quad 4.5-inch double-walled chrome silver tips
• Includes AWE AFM Valve Simulators for full compatibility
• No Check Engine Light (CEL) Guarantee
• Direct bolt-on fitment; no cutting or welding required
• AWE Lifetime Exhaust Warranty
• Manufacturer Part Number: 3015-42133

Fits select 2021-2025 Ford Bronco models (2.3L) including Badlands, Base, Big Bend, Black Diamond, Everglades, Heritage Edition, and Outer Banks trims.

The Borla Touring Axle-Back exhaust system (MPN 11973) is engineered to provide a mellow, refined exhaust note for the 2.3L Ford Bronco without the cabin drone common in aftermarket systems. This system is constructed from premium T-304 stainless steel for superior corrosion resistance and durability compared to factory components. The design features a 2.5-inch inlet transitioning into a 2.75-inch muffler inlet, exiting via dual 2.5-inch tailpipes finished with dual 4-inch round polished T-304 stainless steel tips.

Built with precision CNC manufacturing and ultra-smooth mandrel bends, this system ensures optimal exhaust flow and an accurate fit. A unique Borla muffler hanger design moves the mounting points out of sight for a cleaner, high-clearance rear appearance. Made in the USA and backed by a Million-Mile warranty.

• System Series: Touring (Mellow Sound)
• Exit Style: Single Split Rear
• Tubing Diameter: 2.5" into 2.75" inlet / 2.5" tailpipes
• Tip Description: Dual 4" Round Polished T-304 Stainless Steel
• Construction: Mandrel-bent T-304 Stainless Steel
• Installation: Bolt-on Axle-Back
• Manufacturer Part Number: 11973

Fits 2021-2025 Ford Bronco models including Badlands, Base, Big Bend, Black Diamond, Everglades, First Edition, Heritage Edition, Outer Banks, Stroppe Edition, and Wildtrak (L4-2.3L / V6-2.7L).

The aFe Power Vulcan Series axle-back exhaust system is engineered to provide a mild, refined exhaust note while improving flow. Constructed from 3-inch to 2-1/2-inch mandrel-bent 304 stainless steel tubing, this system offers superior corrosion resistance and durability. The high-flow 304 stainless steel muffler is 100% MIG-welded for race-proven strength, ensuring long-term reliability under demanding conditions.

This system is finished with dual 4-inch diameter black 304 stainless steel clamp-on tips featuring a laser-etched aFe POWER logo. Designed as a direct bolt-on solution, it utilizes factory-style hangers for a secure fit without the need for cutting or permanent modifications. Precise fitment is guaranteed through state-of-the-art computer-aided design technology.

• Manufacturer Part Number: 49-33137-B
• Material: 304 Stainless Steel
• Tubing Diameter: 3 in. to 2-1/2 in. mandrel-bent
• Tip Size: Dual 4 in. clamp-on tips
• Tip Finish: Black powder-coated 304 stainless steel
• Muffler Type: High-flow 304 stainless steel
• Installation: Direct bolt-on using factory mounting points

Fits 2021-2025 Ford Bronco (Badlands, Base, Big Bend, Black Diamond, Everglades, First Edition, Heritage Edition, Heritage Limited Edition, Outer Banks, Stroppe Edition, and Wildtrak).

Improve your off-road ground clearance and exhaust note with the aFe Apollo GT Series axle-back system. Engineered specifically for the 2021-2025 Ford Bronco, this system is constructed from 3-inch mandrel-bent 409 stainless steel tubing for maximum flow and durability. It features a high-flow 304 stainless steel muffler that delivers a deep, aggressive tone while unleashing potential horsepower and torque.

The standout feature is the Hi-Tuck tip design, which is developed to provide extra clearance during extreme angle climbs or descents, protecting your exhaust components from damage on rough terrain. This system is 100% MIG-welded for race-proven strength and utilizes factory-style hangers for a secure, direct bolt-on installation with no cutting or modifications required.

• Construction: 3" mandrel-bent 409 stainless steel tubing
• Muffler: High-flow 304 stainless steel for deep sound
• Ground Clearance: Hi-Tuck tip design protects exhaust over rough terrain
• Installation: Direct bolt-on with factory-style hangers; no cutting required
• Compatibility: Compatible with Rock Jock Swaybar (RJ-286200-101)
• Durability: 100% MIG-welded for long-term reliability
• MPN: 49-43147

Fits 2024-2026 Toyota Land Cruiser (J250) models (1958, Base, First Edition) equipped with the L4-2.4L turbo engine.

The aFe Power Apollo GT Series axle-back exhaust system is engineered for the rigors of off-road use, prioritizing ground clearance and durability. This system is constructed from 2-1/2 inch mandrel-bent 409 stainless steel tubing to ensure smooth exhaust flow and long-term resistance to corrosion. It features a high-flow 409 stainless steel muffler that delivers a deep, resonant tone without compromising the vehicle's departure angles.

Designed specifically for enthusiasts who take their Land Cruiser off the beaten path, the Apollo GT features a "Hi-Tuck" exhaust tip. This design provides significantly more clearance during extreme climbs and descents, protecting your exhaust components from rocks and uneven terrain. The system is 100% MIG-welded for race-proven strength and uses heavy-duty flanges to ensure a leak-free seal under high-vibration conditions.

Installation is a straightforward bolt-on process. This kit utilizes factory-style flanges and hangers to mount directly to the OE locations, requiring no cutting or permanent vehicle modifications. Computer-aided design (CAD) ensures precise fitment for a hassle-free garage installation.

• Manufacturer Part Number: 49-46081
• 2-1/2 IN mandrel-bent 409 stainless steel tubing
• Hi-Tuck tip design for maximum off-road clearance
• High-flow 409 stainless steel muffler
• 100% MIG-welded construction
• Direct bolt-on fitment using factory mounting points

Fits 2014-2019 Chevrolet Corvette Stingray, Z06, ZR1, and Grand Sport models.

The AWE Track Edition Axle-Back Exhaust is engineered for Corvette owners seeking the most aggressive sound profile available. This system is handcrafted from 3-inch U.S.-sourced CNC mandrel-bent T304L stainless steel with a .065-inch wall thickness. By utilizing straight-through sections in place of resonators, the Track Edition maximizes weight savings and delivers a raw, high-performance exhaust note that is noticeably louder than the Touring Edition counterparts.

This kit includes AWE AFM Valve Simulators, which are essential for C7 Corvettes equipped with Active Fuel Management. These CNC laser-cut T304 stainless steel simulators allow you to relocate the factory AFM valve motors safely, preventing check engine lights (CEL) while removing the valves from the exhaust path. The system is finished with quad 4.5-inch double-walled slash-cut tips in Chrome Silver, which are individually adjustable to allow for custom depth within the rear bumper fascia.

• Dyno-verified max gains of 22 hp and 20 lb-ft of torque at the wheels
• CNC mandrel-bent 3-inch T304L stainless steel construction
• Includes AWE AFM Valve Simulators to maintain factory ECU operation
• Direct bolt-on fitment replaces restrictive OE rear section
• Quad 4.5-inch double-walled slash-cut tips in Chrome Silver finish
• Proudly engineered and manufactured in the USA
• AWE Lifetime Exhaust Warranty
• Manufacturer Part Number: 3020-42073

Fits 2020-2026 Ford Explorer ST and 2020-2025 Lincoln Aviator (3.0L).

Enhance the presence and performance of your 3.0L SUV with the Gibson 619718 Axle-Back Dual Exhaust System. Engineered for a precise fit, this system is dyno-tuned to provide an aggressive exterior exhaust note while maintaining minimal interior drone, making it ideal for daily driving. The system is constructed from mandrel-bent stainless steel tubing to ensure maximum exhaust flow and long-term durability against corrosion.

This axle-back kit features Gibson’s baffled and chambered performance mufflers, which utilize no internal packing that can degrade or blow out over time. The exit is finished with polished stainless steel round slash-cut tips that align with the vehicle's factory styling. Installation is a straightforward bolt-on process using existing factory-style hangers and the included hardware, requiring no welding or permanent modifications to your vehicle.

• Manufacturer Part Number: 619718
• Tubing Diameter: 2.25-inch mandrel-bent stainless steel
• Muffler Type: Baffled and chambered (no internal packing)
• Exit Style: Dual rear exit with polished stainless slash-cut tips
• Installation: Direct bolt-on; no welding required
• Warranty: Lifetime Limited Warranty
• Includes all necessary hardware and factory-style hangers

Fits 2011-2026 Dodge Durango (5.7L).

Enhance your Dodge Durango’s performance and exhaust profile with the Gibson Axle-Back Exhaust System. This system is engineered to provide an aggressive exterior exhaust note with minimal interior drone, utilizing a baffled and chambered muffler design that contains no internal packing to wear out or blow out over time. By replacing the restrictive rear factory exhaust components, this kit improves flow and adds a custom look with a straightforward installation.

Built for durability and performance, the system features stainless steel mandrel-bent tubing for consistent exhaust velocity. The assembly is finished with premium black ceramic-coated 304 stainless steel slash-cut tips for a high-end, stealthy appearance. This kit is designed as a direct bolt-on solution, utilizing factory-style hangers and requiring no welding for installation.

• Manufacturer Part Number: 616006B
• System Type: Axle-Back
• Muffler Design: Baffled/Chambered; no internal packing
• Tubing Material: Stainless steel mandrel-bent tubing
• Tip Material: 304 Stainless steel with black ceramic finish
• Tip Style: Round slash-cut design
• Installation: Bolt-on; no welding required; includes all hardware and factory-style hangers
• Sound Profile: Aggressive external sound with minimal interior drone

Fits 2014-2024 Mini Cooper S models (Excludes John Cooper Works models).

The Borla S-Type Axle-Back exhaust system (11915CB) is engineered to provide the signature Borla "Sound of Power" without the annoyance of cabin drone. This system replaces the restrictive factory rear muffler section with a high-flow, straight-through design that increases exhaust velocity for improved throttle response and driving dynamics. By focusing on the rear section of the vehicle, this axle-back kit offers an impactful acoustic upgrade and weight savings over the heavy OE muffler.

Constructed entirely from premium T-304 stainless steel, this system provides superior corrosion resistance compared to T-400 series or aluminized steel alternatives. The 2.5-inch mandrel-bent tubing ensures maximum exhaust flow, while the dual 4-inch round tips feature a high-temperature black coating for a stealthy, aggressive aesthetic. Precision CNC manufacturing ensures an accurate fit using factory mounting points.

• System Type: Axle-Back
• Series: S-Type
• Tubing Diameter: 2.5"
• Tip Description: Dual 4" Round Black Coated T-304 Stainless Steel
• Material: Premium T-304 Stainless Steel
• Installation: Bolt-on using factory hangers
• MPN: 11915CB
• Warranty: Million-Mile Warranty

Fits 2009-2013 Chevrolet Corvette Base, Grand Sport, and ZR1 models (6.2L).

The Corsa Xtreme Axle-Back Exhaust is engineered to provide an aggressive, high-performance exhaust note under acceleration without the common drawback of interior cabin drone. Utilizing patented Reflective Sound Cancellation (RSC) technology, Corsa's engineers target and eliminate specific frequencies that cause resonance at cruising speeds, ensuring a refined experience inside the cockpit while maintaining a powerful exterior sound.

Constructed from premium 304 stainless steel, this system increases exhaust flow by 35% over the factory setup, improving efficiency and performance. The system is finished with massive 4.5-inch dual-walled black PVD stainless steel tips for a bold, custom look that resists discoloration. This is a direct bolt-on kit that requires no welding for installation.

• Manufacturer Part Number: 21012BLK
• Patented No-Drone Reflective Sound Cancellation (RSC) Technology
• 304 Stainless Steel construction for maximum durability
• Dual-walled 4.5-inch Black PVD stainless steel tips
• Flows 35% better than the stock exhaust system
• Direct bolt-on installation; no welding required
• Made in the U.S.A.
• Replaces manufacturer part number 14959

Fits 2021-2025 Ford Bronco Badlands, Base, Big Bend, Black Diamond, Everglades, Heritage Edition, and Outer Banks (2.3L).

The Borla ATAK (Aggressive Tool for Analysis of Kinetic Energy) axle-back exhaust system is engineered to provide the highest available decibel levels in the Borla street-legal lineup without introducing cabin drone. Designed specifically for the 2.3L Ford Bronco 4WD, this assembly features an entire high-temperature black coating for a durable, stealthy appearance. The system utilizes ultra-smooth mandrel-bent T-304 stainless steel tubing to maximize exhaust flow and corrosion resistance.

This kit includes a custom muffler hanger design that relocates the hardware out of sight for a cleaner rear-end aesthetic. The exhaust path begins with a 2.5-inch inlet flowing into a 2.75-inch muffler inlet, exiting through dual 2.5-inch tailpipes finished with 4-inch round T-304 stainless steel tips. Precise CNC manufacturing ensures a direct-fit, bolt-on installation using factory mounting points.

• ATAK sound level for an aggressive, high-performance exhaust note
• High-temperature black finish on the entire assembly
• Dual 4-inch round black coated T-304 stainless steel tips
• 2.5-inch inlet into 2.75-inch muffler inlet and dual 2.5-inch tailpipes
• No-drone technology for long-distance driving comfort
• T-304 stainless steel construction for maximum durability
• Hidden muffler hanger design for improved vehicle aesthetics
• Manufacturer Part Number: 11975CB
• Covered by Borla's Million-Mile Warranty

Fits 2019-2024 BMW 330i and 430i (Base and xDrive) G2X models, excluding convertible.

The AWE Touring Edition Axle-Back Exhaust for the BMW G2X 330i and 430i provides a sophisticated acoustic upgrade that balances increased exterior volume with a refined cabin experience. Beginning after the secondary catalyst, this system utilizes a 3-inch CNC mandrel-bent route that leads to dual patented 180 Technology® resonators. These resonators are specifically engineered to cancel out drone-prone frequencies using a straight-through design, ensuring maximum exhaust flow without the need for restrictive packing material.

Constructed from US-sourced .065-inch wall T304L stainless steel, this axle-back system is designed for durability and a perfect fit. The package includes AWE Valve Simulator Brackets and an OEM-style sleeve clamp to facilitate a direct bolt-on installation and easy reversion to stock if required. The system is finished with dual 4.5-inch slash-cut, double-walled tips in Diamond Black.

• 3-inch U.S.-sourced .065-inch wall T304L stainless steel construction
• Patented drone-canceling 180 Technology® resonators
• Dual 4.5-inch slash-cut, double-walled tips in Diamond Black
• Direct bolt-on design for factory-like simplicity
• AWE Valve Simulator Brackets and OEM sleeve clamp included
• 50-state emissions legal
• No CEL Guarantee and Perfect Fitment Guarantee
• Lifetime Warranty
• Manufacturer Part Number: 3015-33429

Fits 2011-2014 Subaru Impreza WRX/STI and 2015-2019 Subaru WRX/STI (2.0L / 2.5L).

The MagnaFlow Competition Series Axle-Back Performance Exhaust System 19362 is engineered to provide an aggressive, attention-grabbing exterior sound while maintaining a moderate interior volume. This system replaces the restrictive factory mufflers from the rear axle back, using 2-inch mandrel-bent 409 stainless steel tubing to ensure fast-flowing exhaust gases and improved throttle response. By utilizing straight-through resonators and advanced CNC robotic manufacturing, this kit delivers dyno-proven performance gains and the signature deep MagnaFlow resonant note.

Installation is a direct bolt-on process designed to fit factory mounting points perfectly, thanks to precision 3D scanning during development. The system is finished with a quad split rear exit featuring 4-inch polished double-wall, angle-cut folded-edge tips that provide a bold, sporty aesthetic to your Subaru's rear profile.

• Material: 409 Stainless Steel with CNC precision manufacturing
• Piping: 2-inch mandrel-bent main piping
• Muffler Type: Straight-through competition design
• Exit Style: Quad split rear exit
• Tips: 4-inch polished welded-on double wall angle cut
• Installation: Direct-fit axle-back design
• Manufacturer Part Number: 19362
• Warranty: MagnaFlow Limited Lifetime Warranty

Fits 2021-2024 Kia K5 GT (L4-2.5L).

The aFe Takeda axle-back exhaust system provides a deep, aggressive tone and improved exhaust flow for the Kia K5 GT. This system is engineered using state-of-the-art CAD technology for precise fitment, utilizing a mitered merge collector to reduce turbulence and increase exhaust velocity. Constructed from 3-inch to 2-1/2-inch mandrel-bent 304 stainless steel tubing, it ensures maximum durability and corrosion resistance for long-term performance.

This direct bolt-on system installs easily using factory-style flanges and hangers, requiring no cutting or permanent modifications to your vehicle. The system is finished with quad 4-inch diameter black 304 stainless steel clamp-on tips featuring a laser-etched Takeda logo for a premium, custom appearance.

• Fits 2021-2024 Kia K5 GT (L4-2.5L)
• Constructed from 3" and 2-1/2" mandrel-bent 304 stainless steel tubing
• Quad 4" black 304 stainless steel clamp-on tips with laser-etched Takeda logo
• 100% MIG-welded for race-proven strength and durability
• Mitered merge collector improves exhaust velocity and throttle response
• Direct bolt-on installation with factory-style flanges and hangers
• Manufacturer Part Number: 49-37043-B

Fits select 2014-2023 Lexus IS200t, IS250, IS300, and IS350 models.

Improve the performance and sound of your Lexus with the aFe Takeda axle-back exhaust system. This direct bolt-on system is engineered from 2.5-inch mandrel-bent 304 stainless steel tubing for maximum flow and durability. In dyno testing, this configuration produced gains of up to +13 HP and +14 lb-ft of torque. Dual high-flow 304 stainless steel mufflers provide a smooth, refined exhaust note without compromising power.

Installation is straightforward and requires no cutting or modifications, as the system utilizes factory-style flanges and hangers. For lasting strength, every joint is 100% MIG-welded. The system is finished with dual 4.5-inch black 304 stainless steel clamp-on tips featuring a laser-etched Takeda logo.

• Manufacturer Part Number: 49-36060-B
• Construction: 2.5-inch mandrel-bent 304 stainless steel tubing
• Mufflers: Dual high-flow 304 stainless steel
• Tips: Dual 4.5-inch black clamp-on stainless steel tips
• Installation: Direct bolt-on; fits factory hangers and flanges
• Performance Gains: Up to +13 HP and +14 lb-ft TQ

Fits 2017-2025 Mazda CX-5 (2.5L). Upgrade the performance and acoustics of your Mazda CX-5 with the aFe Power Takeda MACH Force-Xp axle-back exhaust system. This system is engineered for maximum durability and flow, featuring 2.5-inch mandrel-bent stainless steel tubing that reduces restriction and improves exhaust velocity. The high-flow stainless steel muffler is tuned to deliver a deeper, more aggressive tone without compromising cabin comfort during daily driving.

Constructed with 100% MIG-welded joints, this system is designed to handle high heat and road stress over the life of the vehicle. Installation is a straightforward bolt-on process, utilizing factory-style flanges and hangers for a secure fit that requires no cutting or permanent modifications to your chassis. The system is finished with dual 4-inch black stainless steel exhaust tips for a premium, custom appearance. Manufacturer Part Number: 49-37021-B.

• 2.5-inch mandrel-bent stainless steel tubing for maximum flow and strength
• High-flow stainless steel muffler provides a deepened, refined exhaust note
• Dual 4-inch black stainless steel exhaust tips with Takeda branding
• 100% MIG-welded for long-term durability and structural integrity
• Direct bolt-on fitment using factory mounting points and flanges
• Includes all necessary hardware for a complete installation
• Manufacturer Part Number: 49-37021-B

Fits 2015 BMW 3 Series F30 LCI Sedan and F31 LCI Touring models.

The Remus axle-back exhaust system is engineered to enhance the acoustic signature and exhaust flow of the BMW F30/F31 LCI platform. This performance muffler unit (MPN: 088015 1500) replaces the factory rear silencer, offering a more aggressive, resonant tone that remains refined for daily driving. Built to exacting tolerances, it utilizes factory-style mounting points for a secure and straightforward installation.

Please note that this is the axle-back muffler section only; tailpipes are required and must be purchased separately to complete the system.

• Specifically designed for 2015 BMW 3 Series F30/F31 LCI (Sedan/Touring)
• Optimized backpressure for improved engine response
• High-grade construction for durability and heat resistance
• Manufacturer Part Number: 088015 1500
• Requires Remus tailpipe set (sold separately)

Fits 2024-2025 Ford Mustang GT and GT Premium (5.0L) models NOT equipped with the factory Active Valve Exhaust system. Designed to fit both coupe and convertible body styles.

This Borla S-Type Axle-Back exhaust system (MPN: 11983) delivers a deep, aggressive tone without the interior drone common in lesser systems. Engineered with 2.5-inch mandrel-bent T-304 stainless steel tubing, this system utilizes Borla's patented straight-through, multi-core technology to optimize exhaust velocity and flow. The system is finished with dual 4-inch bright chrome tips for a premium aesthetic that complements the S650 chassis.

Built for durability and performance, Borla uses high-grade T-304 stainless steel throughout the construction, offering superior corrosion resistance compared to 409-series alternatives. This precision-manufactured system bolts directly to factory points for an accurate fit and is backed by a Million-Mile Warranty.

• System Type: Axle-Back
• Tubing Diameter: 2.5"
• Tip Description: 4" Bright Chrome T-304 Stainless Steel
• Sound Level: S-Type (Aggressive)
• Material: T-304 Stainless Steel
• Exit Style: Dual Rear Exit
• Manufacturer Part Number: 11983

Fits 2016-2024 Chevrolet Camaro SS models (V8-6.2L) equipped with factory single-tip exhaust and NOT equipped with NPP Dual Mode Exhaust valves.

The Borla ATAK (Abusive Tongue and Cheek) rear section exhaust is designed for Camaro SS owners who want the highest-volume, most aggressive sound note available without the annoying interior cabin drone. This axle-back system replaces the heavy, restrictive factory muffler assembly with high-flow, straight-through technology to increase exhaust velocity and unleash hidden power.

Each system is precision-manufactured using 2.75-inch mandrel-bent T-304 austenitic stainless steel, a premium material that offers superior durability and corrosion resistance over standard T-400 series or aluminized steel. The system is finished with a pair of 4.5-inch round tips featuring a high-temperature ceramic black finish for a stealthy, high-performance aesthetic.

• System Type: Rear Section / Axle-Back
• Sound Level: ATAK (Most Aggressive)
• Tubing Diameter: 2.75"
• Tip Finish: High-Temp Ceramic Black
• Tip Size: 4.5" Round T-304 Stainless Steel
• Material: Premium T-304 Stainless Steel
• Fitment: Fits both Automatic and Manual Transmissions
• MPN: 11923CB

Installation Note: This system is engineered specifically for vehicles that came from the factory with single tips. It is not compatible with NPP Dual Mode systems. For Coupe owners looking to build a full cat-back system, this unit can be paired with Borla X-Pipe and Mid-Pipe assemblies (Part #60607 or #60610).

Fits 2021-2025 Ford Bronco 2.3L models including Badlands, Base, Big Bend, Black Diamond, Everglades, Heritage Edition, and Outer Banks. This Borla S-Type axle-back exhaust system (MPN 11974CB) is engineered specifically for the 2.3L powertrain, providing an aggressive, balanced sound with a deep tone and zero cabin drone.

Constructed from premium T-304 stainless steel, the entire assembly is finished in a high-temperature black coating for superior corrosion resistance and a stealthy aesthetic. The system features a 2.5-inch inlet that transitions into a 2.75-inch muffler inlet, exiting through dual 2.5-inch tailpipes. Ultra-smooth mandrel bends and CNC manufacturing ensure maximum exhaust flow and a precise, bolt-on fit to factory mounting points. For a cleaner look, the muffler hangers are designed to be tucked out of sight.

• Borla S-Type sound level: Aggressive tone with no-drone technology
• Full T-304 stainless steel construction with high-temp black finish
• Dual 4-inch round black coated T-304 stainless steel tips
• 2.5-inch to 2.75-inch inlet piping with dual 2.5-inch tailpipes
• Mandrel-bent tubing for optimized exhaust gas velocity
• Concealed muffler hanger design for improved aesthetics
• Made in the USA
• Manufacturer Million-Mile Warranty