Fits select 1970-2010 Chevrolet K20 and K30 models equipped with a 14-bolt rear axle.

The Artec Industries 14 Bolt Rear Short Truss is engineered to provide critical structural reinforcement to your axle housing. By bracing the axle tubes against the differential housing, this truss significantly reduces the risk of tube flex or bending—a common failure point during high-torque applications or aggressive off-road use. This "short" version offers a compact footprint, making it an excellent choice for builders looking for maximum strength with minimal interference for suspension links or brackets.

• Precision-cut components for a tight, high-tolerance fit on the GM 14-bolt housing
• Heavy-duty construction helps prevent axle tube separation and housing distortion
• Low-profile design allows for easier packaging in custom suspension setups
• Designed for durability in extreme rock crawling and heavy-towing scenarios
• Manufacturer Part Number: TR1406

Strengthen your heavy-duty axle housing with the Artec Industries Modular Truss End. This long-profile component is precision-engineered to integrate with your existing truss system, specifically designed for 3.5-inch diameter axle tubes. It provides the critical reinforcement needed to bridge the gap between the main truss and the axle's inner C's, effectively preventing tube bending and housing deflection during extreme off-road use.

• Fits 3.5-inch outer diameter (OD) axle tubes
• Modular "Long" design allows for extended coverage and custom fitment
• Crucial for high-stress applications like rock crawling and high-speed desert racing
• Heavy-duty construction to withstand significant torque and impact loads
• Manufacturer Part Number: TR0004

Fits 1993-2006 Jeep Wrangler TJ and LJ models equipped with a Dana 30 front axle.

Strengthening the factory inner knuckles, or "Cs," is a critical upgrade for Jeep TJs and LJs running larger tire diameters or navigating technical terrain. The Artec Industries Inner C Gussets are designed to prevent the bending and housing deformation that often occurs when the Dana 30 axle is subjected to increased leverage and vertical loads on the trail.

Precision-cut for a tight fit against the axle C, these heavy-duty steel gussets reinforce the upper and lower sections of the knuckle. This modification is essential for maintaining proper camber and ensuring the long-term integrity of your front end. As a weld-on reinforcement, this kit provides a permanent solution to one of the most common failure points on the TJ-platform Dana 30.

• Replaces/replaces: Weak factory C-end support
• Material: Heavy-duty steel
• Part Number: TJ3010
• Installation: Requires welding for secure attachment
• Application: Dana 30 Front Axles

Build heavy-duty suspension links, track bars, and steering components with this Artec Industries weld-in tube adapter. Designed for professional fabrication, the TA2001R allows you to secure a 1-1/4 inch rod end or Heim joint into standard 2.0-inch outer diameter tubing with a 0.250-inch wall thickness (1.5-inch ID).

• Thread Size: 1.25" - 12 TPI
• Thread Direction: Right Hand (Standard)
• Target Tubing ID: 1.500"
• Target Tubing OD: 2.000"
• Manufacturer Part Number: TA2001R

Build custom suspension links, steering components, or track bars with the Artec Industries TA2001L tube adapter. This heavy-duty adapter is precision-machined to provide a secure, weldable interface between 2.0-inch OD tubing and your rod ends. It is designed specifically for 1.25-inch diameter rod ends with a 12 TPI thread pitch.

• Manufacturer Part Number: TA2001L
• Thread Size: 1.25" - 12 TPI
• Thread Orientation: Left Hand (LH / Reverse)
• Tube Fitment: Designed for 1.5" ID (Inner Diameter) / 2.0" OD (Outer Diameter) tubing
• Application: Ideal for fabrication of 4-link, 3-link, or custom steering systems

The Artec Industries 4-Link Tube and End Kit (LK4002) is a professional-grade solution for fabricators building or upgrading custom off-road suspension systems. This kit centers around high-strength 1.25-inch Krawler Joints, designed to provide the extreme articulation and durability required for rock crawling and technical trail use.

• Complete 4-link hardware set including tubes and end components.
• Equipped with 1-1/4 inch Krawler Joints for maximum bind-free movement and longevity.
• Engineered for custom suspension geometry and heavy-duty fabrication projects.
• Heavy-wall tubing and precision-machined ends ensure structural integrity under load.
• Manufacturer Part Number: LK4002

As a universal fabrication kit, this system requires professional welding and an understanding of suspension link geometry for proper installation and performance.

The Artec Industries Easy 3 Link Kit (LK0135) is engineered to simplify complex suspension geometry for custom off-road builds. This kit features an adjustable upper link configuration with an outside-of-the-frame offset, specifically designed for front driver-side or rear passenger-side mounting. By providing a precision-cut mounting solution, it helps installers establish correct link placement and roll centers while maintaining the high-strength durability required for extreme rock crawling and articulation.

• Manufacturer Part Number: LK0135
• Series: Easy 3 Link Kit
• Component: Adjustable Upper Link
• Configuration: Outside Frame Offset
• Placement: Front Driver Side or Rear Passenger Side
• Designed for heavy-duty off-road fabrication

The Artec Industries Easy 4 Link Kit C streamlines the process of building a high-articulation custom suspension. This comprehensive kit is designed for fabricators and off-roaders looking to implement a heavy-duty 4-link system using proven geometry and professional-grade components.

Featuring massive 1-1/4 inch Krawler Joints at all connection points, this kit provides the strength and rotational clearance required for extreme rock crawling and trail use. The inclusion of heavy-wall tubing and premium rod ends ensures your suspension can handle the torque and stress of oversized tires and rugged terrain while remaining serviceable.

• Kit Series: Easy 4 Link - Kit C
• Joint Size: 1-1/4" Krawler Joints (all positions)
• Material: High-strength steel tubing components
• Application: Custom 4-link suspension fabrication
• Part Number: LK0025

Simplify your custom suspension fabrication with the Artec Industries Easy 4 Link Kit B. This package is engineered to take the guesswork out of complex suspension geometry, providing a robust solution for off-road builds that require maximum articulation and component strength.

This "Kit B" configuration utilizes Artec's heavy-duty 1-1/4 inch Krawler Joints, which are designed to handle the high-stress loads of rock crawling and aggressive trail use. By providing the essential joint hardware and link components, this kit allows fabricators to build a durable, adjustable 4-link system that improves axle control and travel over stock configurations.

• Manufacturer Part Number: LK0015
• Features high-strength 1-1/4 inch Krawler Joints for maximum durability
• Kit B specific hardware and component configuration
• Designed for integration with DOM link tubing
• Engineered to establish proper 4-link suspension geometry and high articulation

The Artec Industries Easy 4 Link Kit A (LK0005) is a heavy-duty suspension fabrication solution designed for custom off-road builds that require maximum axle control and articulation. This comprehensive kit simplifies the engineering required for a 4-link setup, providing a reliable foundation for high-performance rock crawling and trail rigs.

This specific Kit A configuration includes essential suspension tubing and utilizes 1.25-inch Krawler joints at all ends. These joints are chosen for their massive load capacity and superior range of motion, ensuring bind-free suspension cycling during extreme articulation. The components are manufactured with the precision necessary for high-tolerance fabrication, allowing you to dial in your suspension geometry with confidence.

• Manufacturer Part Number: LK0005
• Joint Specification: 1-1/4 Inch Krawler Joints for high-load durability
• Configuration: Kit A with included suspension tubing
• Application: Custom 4-link rear or front suspension fabrication
• Construction: Heavy-duty steel components ready for welding and installation

Reinforce your vehicle's rear end for demanding off-road use with the Artec Industries Apex Rear Axle Truss. Specifically engineered for the 2018-2025 Jeep Wrangler JL Sahara, this truss provides essential structural rigidity to the factory axle housing, preventing the axle tubes from bending or the housing from deflecting under the stress of larger tires and rugged terrain.

• Fits 2018-2025 Jeep Wrangler JL Sahara models.
• Apex series design offers a low-profile, high-strength solution for axle reinforcement.
• Precision-engineered to contour to the factory rear axle for a secure fit.
• Helps prevent permanent axle damage during rock crawling or high-speed desert driving.
• Manufacturer Part Number: JL4502

Please note: This is a weld-on component and requires professional installation to ensure proper alignment and structural integrity.

Fits 2018-2025 Jeep Wrangler JL and Gladiator JT models equipped with a front Dana 44 axle.

Reinforce your front end for serious off-roading with the Artec Industries Apex Front Axle Truss. This heavy-duty reinforcement system is engineered to solve the common issue of axle tube bending and housing deflection that occurs when running larger tires or tackling aggressive terrain. The Apex series features a low-profile design that provides maximum clearance while adding significant structural rigidity to the factory housing.

Constructed from precision laser-cut steel, this truss is designed to wrap around the differential and extend along the axle tubes, distributing loads more effectively than the stock configuration. This is an essential upgrade for Jeep owners looking to maintain axle alignment and prevent catastrophic housing failure during high-torque or high-impact maneuvers.

• Specifically designed for the 2018-2025 Jeep JL and JT Dana 44 front axle
• Low-profile Apex design for improved suspension clearance
• Reinforces axle tubes and housing to prevent bending
• Precision CNC laser-cut and bent for a perfect fit
• Requires professional welding for installation
• Manufacturer Part Number: JL4501

Fits 2018-2025 Jeep Wrangler JL Sahara models equipped with the Dana 30 (D30) front axle.

The Artec Industries Apex Front Axle Truss is engineered to provide critical structural reinforcement for your Jeep's front end. Designed to address the factory housing's vulnerabilities, this truss helps prevent axle tube bending or shearing during heavy off-road use or when running larger tire diameters. The Apex series features a low-profile design that maintains necessary clearances while significantly increasing the rigidity of the Dana 30 housing.

• Specifically designed for Jeep Wrangler JL Sahara Dana 30 front axles
• Strengthens the axle housing to prevent bending under load or impact
• Low-profile Apex series geometry for maximum clearance
• Precision-engineered for a secure fit to factory axle contours
• Manufacturer Part Number: JL3101

Fits 2007-2018 Jeep Wrangler JK models equipped with a Dana 44 front axle.

The Artec Industries Apex Front Axle Truss (JK4451) provides essential structural reinforcement for your Dana 44 housing. This truss is designed to bridge the axle tubes and the differential center section, significantly increasing the axle's resistance to bending or shearing under the stress of off-road use, larger tire diameters, and heavy suspension loads.

• Precision-engineered for the 2007-2018 Jeep Wrangler JK Dana 44 front axle
• Apex series design optimizes the strength-to-weight ratio for maximum reinforcement
• Helps prevent permanent axle tube deflection and housing failure
• Low-profile construction designed to maintain clearance for suspension components
• Manufacturer Part Number: JK4451

Fits 2007-2018 Jeep Wrangler JK.

Reinforce your front axle housing with Artec Industries Inner C Gussets (JK4405). The factory Dana 30 and Dana 44 axle housings on the Jeep JK are prone to bending at the inner C-knuckles when subjected to the stress of larger tires and off-road articulation. These gussets provide the necessary structural support to prevent axle deflection and costly housing damage.

• Engineered to reinforce the upper and lower factory inner C-knuckles
• Heavy-duty steel construction for maximum rigidity
• Precision-cut for a direct fit on Dana 30 and Dana 44 front axles
• Essential upgrade for Wranglers running 35-inch or larger tires
• Manufacturer Part Number: JK4405

Fits select 2007-2018 Jeep Wrangler JK models equipped with a Dana 30 front axle.

The Artec Industries Apex Front Axle Truss (JK3051) provides essential structural reinforcement for the factory Dana 30 housing, a necessary upgrade for JK owners running larger tires or tackling demanding off-road trails. This low-profile truss system is engineered to strengthen the factory axle tubes, effectively preventing the housing from bending or shearing under the high-stress loads encountered during technical wheeling.

• Precision CNC-cut and bent for an exact fit on the Dana 30 front axle assembly
• Low-profile design ensures maximum clearance for suspension components and steering geometry
• Heavy-duty construction reinforces the axle tubes to maintain long-term housing integrity
• Integrated design provides comprehensive support across the axle span
• Manufacturer Part Number: JK3051

Fits 2007-2018 Jeep Wrangler JK models performing a 1-ton axle conversion.

The Artec Industries Apex Rear 14 Bolt Truss Swap Kit (JK1415) is a heavy-duty fabrication solution for Jeep JK owners upgrading to a GM 14-bolt rear axle. This kit is engineered to provide the structural rigidity required for hardcore off-roading while simplifying the geometry needed to integrate a 1-ton axle into the JK chassis. The low-profile Apex design ensures maximum clearance without sacrificing the strength needed to prevent axle housing flex under high torque loads.

• Precision-engineered for GM 14-bolt rear axle tube fitment
• High-strength steel construction for maximum durability in extreme terrain
• Low-profile Apex series design for optimized suspension and floor clearance
• Provides indexed mounting points to streamline the swap process
• Designed for 2007-2018 Jeep Wrangler JK (2-Door and 4-Door)
• Manufacturer Part Number: JK1415

Fits 2005-2012 Ford F-250 and F-350 Super Duty models.

The Artec Industries Crossover Weld-On High Steer Arms are engineered to solve steering geometry challenges on lifted Super Duty trucks or vehicles utilizing late-model Super Duty axle swaps. These weld-on components provide a robust mounting point for a crossover steering configuration, moving the drag link higher to correct extreme angles and reduce bump steer.

Constructed for high-clearance applications, this kit is designed specifically to interface with the factory 2005-2012 Super Duty knuckle. By relocating the steering linkage above the leaf springs or suspension components, you gain better leverage and improved steering response on technical terrain. These arms are essential for builders seeking a heavy-duty, permanent solution for off-road steering performance.

• Fits 2005-2012 Ford F-250 and F-350 (Super Duty Knuckle)
• Enables crossover steering for improved drag link geometry
• Weld-on design for maximum strength and durability
• Precision-engineered for a secure fit to the factory casting
• Manufacturer Part Number: HS6150

Complete your suspension fabrication with the Artec Industries 4-Link Hardware Assembly Kit. Designed for builders using 1-1/4 inch rod ends or bushings, this comprehensive hardware package eliminates the guesswork of sourcing individual high-strength fasteners for a full 4-link setup.

This kit is engineered to provide the essential mounting hardware required to secure your upper and lower control arms to both the chassis and axle brackets. Each component is selected for the rigorous demands of off-road articulation and high-torque applications, ensuring your suspension geometry remains secure under stress.

• Manufacturer Part Number: HK0002
• Hardware Size: 1-1/4 inch (1.25")
• Application: Custom 4-Link Suspension Systems
• Optimized for use with Artec Industries link brackets and suspension components

The Artec Industries Adjustable Link Tower provides a heavy-duty, weld-on mounting solution for custom 3-link and 4-link suspension systems. Specifically engineered for 3-1/4 inch (3.25") diameter axle tubes, this single tower allows fabricators to fine-tune suspension geometry and anti-squat characteristics through multiple mounting hole positions.

• Precision CNC laser-cut from high-strength steel for maximum durability
• Contoured base designed specifically for a flush fit on 3.25-inch axle tubes
• Multiple vertical mounting holes allow for precise link geometry adjustments
• Heavy-duty construction handles the high stress of off-road articulation
• Sold as a single unit (Manufacturer Part Number: BR1061)

Note: This component requires professional welding and fabrication for installation on the axle housing.