Authorized Brand Dealer
Fulfillment From Multiple U.S. Warehouses
Enthusiast Owned & Supported
Authorized Brand Dealer
Fulfillment From Multiple U.S. Warehouses
Enthusiast Owned & Supported
Authorized Brand Dealer
Fulfillment From Multiple U.S. Warehouses
Enthusiast Owned & Supported
Authorized Brand Dealer
Fulfillment From Multiple U.S. Warehouses
Enthusiast Owned & Supported
Authorized Brand Dealer
Fulfillment From Multiple U.S. Warehouses
Enthusiast Owned & Supported
Authorized Brand Dealer
Fulfillment From Multiple U.S. Warehouses
Enthusiast Owned & Supported
Welcome to Atlus Automotive
Main menu
-
Performance
- Performance
-
Intake & Exhaust
- Intake & Exhaust
- Air Intake Systems
- Cold Air Intakes
- Air Intake Components
- Air Filters
- Air Filters - Drop In
- Air Filters - Direct Fit
- Air Filters - Universal Fit
- Pre-Filters
- Recharge Kits
- OE Replacement Air Intake Components
- Exhaust, Mufflers & Tips
- Catback
- Axle Back
- Muffler
- Tips
- Headers & Manifolds
- Connecting Pipes
- Catalytic Converter Direct Fit
- Catalytic Converter Universal
- Exhaust Collector
- Merge Collectors
-
Engine Upgrades
- Engine Upgrades
- Engine Components
- Camshafts
- Valve Springs, Retainers
- Head Gaskets
- Head Stud & Bolt Kits
- Main Stud & Bolt Kits
- Gasket Kits
- Engine Mounts
- Oil Catch Cans
- Oil Separators
- Throttle Bodies
- Throttle Body Spacers
- Crankshaft Dampers
- Valves
- Piston Rings
- Piston Sets - Forged - 4cyl
- Piston Sets - Cast - 4cyl
- Connecting Rods - 4Cyl
- Rotating Assemblies
- Stroker Kits
-
Turbo & Cooling
-
Fuel, Ignition & Tuning
-
Suspension & Handling
- Suspension & Handling
-
Lowering & Coilovers
-
Arms, Links & Alignment
-
Lift & Off-Road Suspension
-
Chassis & Bracing
-
Wheels & Tires
- Wheels & Tires
-
Wheels
-
Tires
-
Drivetrain & Clutch
-
Brakes
- Brakes
-
Pads & Rotors
-
Brake Kits & Calipers
-
Lines, Fluid & Hardware
-
Exterior & Lighting
- Exterior & Lighting
-
Lighting
-
Exterior Styling
-
Bumpers & Protection
-
Interior & Electronics
- Interior & Electronics
-
Interior Upgrades
-
Gauges & Electronics
-
Audio & Safety
-
Overland & Utility
- Overland & Utility
-
Bed Covers & Bed Gear
-
Steps, Racks & Storage
-
Trail & Towing
-
Maintenance & Garage
- Maintenance & Garage
-
Oil, Fluids & Filters
-
Detailing & Car Care
-
Tools & Fabrication
Your cart
Choose your Location
-
Atlus
1340 Cobb Dr, Unit 1, Eustis, FL 32736
352-234-4458
Mon – Fri: 8:30 am – 4:30 pm
Sat: 9:00 am – 2:00 pm
Sun: Closed
Product Comparison
How they are Different
|
__ __ |
|
|---|---|
| Description |
Description - __ |
| Rating |
Rating - __ |
| Vendor |
Vendor - __ |
| Color |
Color - __ |
|
|
Compare products ( / )
25001 products
25001 products
Sort by:
- Featured
- Most relevant
- Best selling
- Alphabetically, A-Z
- Alphabetically, Z-A
- Price, low to high
- Price, high to low
- Date, old to new
- Date, new to old
$285.00
Bilstein B4 OE Replacement dampers are specifically engineered to be the best choice for maintaining the original ride quality of your vehicle, while meeting or exceeding OE standards. These dampers are the ideal choice for the driver looking to restore the original performance and handling of their vehicle, with the added benefit of world-famous Bilstein quality.
Installation InstructionsWarranty
Material Safety Data Sheet
Material Safety Data Sheet
Installation Instructions
Warranty
- Restores original driving comfort, handling and safety
- High power reserves for maximum safety
- Precise Construction
- High OE quality
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 1997-1999,2004 | Porsche | Boxster | Base |
| 2000-2003 | Porsche | Boxster | Roadster |
| 2000-2003 | Porsche | Boxster | Roadster S |
| 2004 | Porsche | Boxster | S |
| 2004 | Porsche | Boxster | S Special Edition |
Bilstein B4 OE Replacement dampers are specifically engineered to be the best choice for maintaining the original ride quality of your vehicle, while meeting or exceeding OE standards. These dampers are the ideal choice for the driver looking to restore the original performance and handling of their vehicle, with the added benefit of world-famous Bilstein quality.
Installation InstructionsWarranty
- Restores original driving comfort, handling and safety
- High power reserves for maximum safety
- High OE quality
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2023-2025 | BMW | X1 | xDrive28i |
Bilstein B4 OE Replacement dampers are specifically engineered to be the best choice for maintaining the original ride quality of your vehicle, while meeting or exceeding OE standards. These dampers are the ideal choice for the driver looking to restore the original performance and handling of their vehicle, with the added benefit of world-famous Bilstein quality.
Installation InstructionsWarranty
Material Safety Data Sheet
- Restores original driving comfort, handling and safety
- High power reserves for maximum safety
- High OE quality
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2018 | Volkswagen | Atlas | Launch Edition |
| 2024-2025 | Volkswagen | Atlas | Peak Edition SE |
| 2024 | Volkswagen | Atlas | Peak Edition SEL |
| 2018-2021 | Volkswagen | Atlas | S |
| 2018-2025 | Volkswagen | Atlas | SE |
| 2019 | Volkswagen | Atlas | SE R-Line |
| 2018-2025 | Volkswagen | Atlas | SEL |
| 2018-2021 | Volkswagen | Atlas | SEL Premium |
| 2021-2025 | Volkswagen | Atlas | SEL Premium R-Line |
| 2019-2022 | Volkswagen | Atlas | SEL R-Line |
| 2023 | Volkswagen | Atlas | SEL R-Line Black |
| 2020-2021 | Volkswagen | Atlas Cross Sport | S |
| 2020-2025 | Volkswagen | Atlas Cross Sport | SE |
| 2020 | Volkswagen | Atlas Cross Sport | SE R-Line |
| 2020-2025 | Volkswagen | Atlas Cross Sport | SEL |
| 2020-2021 | Volkswagen | Atlas Cross Sport | SEL Premium |
| 2020-2025 | Volkswagen | Atlas Cross Sport | SEL Premium R-Line |
| 2020-2022,2024-2025 | Volkswagen | Atlas Cross Sport | SEL R-Line |
| 2023,2025 | Volkswagen | Atlas Cross Sport | SEL R-Line Black |
$135.95
BD Diesel Performance is unique among its peers in that it designs, manufactures and distributes a wide range of products specifically engineered for performance diesel applications. Located in Abbotsford, British Columbia, Canada, BD's state-of-the-art facility covers 65,000 square feet, and employs 60 plus highly-trained individuals. The BD name became recognized in 1989, when the company introduced the first exhaust brake for the burgeoning diesel pick-up truck market. BD's roots, however, actually date back to 1972, when Valley Fuel Injection, Ltd. first opened its doors. Today, Valley Fuel Injection and BD Diesel Performance are one, with eight specialty divisions that focus on diesel power train components: Fuel Injection Calibration Department, Exhaust Brake Manufacturing, Electronic Circuit Design and Assembly, Transmission and Torque Converter Design and Remanufacturing, Turbocharger Design, Installation and Research and Development. BD's comprehensive approach to the diesel performance aftermarket ensures not only quality products, but educated dealers and satisfied customers. Thank you for your interest in BD Diesel Performance!
- 12 Month Or 12000 Mile Warranty
- Exhaust Manifold Gaskets
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 1998-2002 | Dodge | Ram 2500 | Base |
| 2003,2005-2010 | Dodge | Ram 2500 | Laramie |
| 2003-2010 | Dodge | Ram 2500 | SLT |
| 2006-2007 | Dodge | Ram 2500 | Sport |
| 2003-2010 | Dodge | Ram 2500 | ST |
| 2008-2010 | Dodge | Ram 2500 | SXT |
| 2010 | Dodge | Ram 2500 | TRX |
| 2006-2007 | Dodge | Ram 2500 | TRX4 |
| 1998-2002 | Dodge | Ram 3500 | Base |
| 2003-2010 | Dodge | Ram 3500 | Laramie |
| 2003-2010 | Dodge | Ram 3500 | SLT |
| 2006-2007 | Dodge | Ram 3500 | Sport |
| 2003-2010 | Dodge | Ram 3500 | ST |
| 2008-2009 | Dodge | Ram 3500 | SXT |
| 2007 | Dodge | Ram 3500 | TRX4 |
| 2013-2018 | Ram | 2500 | Big Horn |
| 2011-2018 | Ram | 2500 | Laramie |
| 2014-2015 | Ram | 2500 | Laramie Limited |
| 2011-2018 | Ram | 2500 | Laramie Longhorn |
| 2016-2018 | Ram | 2500 | Limited |
| 2013-2015 | Ram | 2500 | Lone Star |
| 2012-2016 | Ram | 2500 | Outdoorsman |
| 2011-2018 | Ram | 2500 | SLT |
| 2011-2013 | Ram | 2500 | ST |
| 2013-2018 | Ram | 2500 | Tradesman |
| 2013-2018 | Ram | 3500 | Big Horn |
| 2011-2018 | Ram | 3500 | Laramie |
| 2014-2015 | Ram | 3500 | Laramie Limited |
| 2011-2018 | Ram | 3500 | Laramie Longhorn |
| 2016-2018 | Ram | 3500 | Limited |
| 2013-2015,2017 | Ram | 3500 | Lone Star |
| 2011-2018 | Ram | 3500 | SLT |
| 2011-2013 | Ram | 3500 | ST |
| 2013-2018 | Ram | 3500 | Tradesman |
$3,827.06
BD Diesel Performance is unique among its peers in that it designs, manufactures and distributes a wide range of products specifically engineered for performance diesel applications. Located in Abbotsford, British Columbia, Canada, BD's state-of-the-art facility covers 65,000 square feet, and employs 60 plus highly-trained individuals. The BD name became recognized in 1989, when the company introduced the first exhaust brake for the burgeoning diesel pick-up truck market. BD's roots, however, actually date back to 1972, when Valley Fuel Injection, Ltd. first opened its doors. Today, Valley Fuel Injection and BD Diesel Performance are one, with eight specialty divisions that focus on diesel power train components: Fuel Injection Calibration Department, Exhaust Brake Manufacturing, Electronic Circuit Design and Assembly, Transmission and Torque Converter Design and Remanufacturing, Turbocharger Design, Installation and Research and Development. BD's comprehensive approach to the diesel performance aftermarket ensures not only quality products, but educated dealers and satisfied customers. Thank you for your interest in BD Diesel Performance!
Installation InstructionsInstallation Instructions
Installation Instructions
- Stock appearing drop in turbo, will work with stock emissions equipment
- Custom Mixed Flow Turbine MFT Wheel With A Large 65mm Exducer
- Increased Airflow Without Compromising On Low End Drivability
- No Tuning Required And Does Not Set Engine Codes
- More Boost Lower Drive Pressure And Lower EGT
- Up to 680hp with supporting modifications
- Reduced EGTs at increased power output
- Larger 66.2mm billet compressor wheel
- Increased airflow - up to 80lb/min
- 64.0mm Billet Compressor Wheel
- Drop-In Stock-Appearing Turbo
- Larger 67mm turbine wheel
- Includes intake horn
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2020-2023 | Chevrolet | Silverado 2500 HD | Custom |
| 2017-2023 | Chevrolet | Silverado 2500 HD | High Country |
| 2017-2023 | Chevrolet | Silverado 2500 HD | LT |
| 2017-2023 | Chevrolet | Silverado 2500 HD | LTZ |
| 2017-2023 | Chevrolet | Silverado 2500 HD | WT |
| 2017-2023 | Chevrolet | Silverado 3500 HD | High Country |
| 2017-2023 | Chevrolet | Silverado 3500 HD | LT |
| 2017-2023 | Chevrolet | Silverado 3500 HD | LTZ |
| 2017-2023 | Chevrolet | Silverado 3500 HD | WT |
| 2020-2023 | GMC | Sierra 2500 HD | AT4 |
| 2017-2021 | GMC | Sierra 2500 HD | Base |
| 2017-2023 | GMC | Sierra 2500 HD | Denali |
| 2022-2023 | GMC | Sierra 2500 HD | Pro |
| 2017-2023 | GMC | Sierra 2500 HD | SLE |
| 2017-2023 | GMC | Sierra 2500 HD | SLT |
| 2020-2023 | GMC | Sierra 3500 HD | AT4 |
| 2017-2021 | GMC | Sierra 3500 HD | Base |
| 2017-2023 | GMC | Sierra 3500 HD | Denali |
| 2022-2023 | GMC | Sierra 3500 HD | Pro |
| 2017-2023 | GMC | Sierra 3500 HD | SLE |
| 2017-2023 | GMC | Sierra 3500 HD | SLT |
$199.95
BD's heavy duty sway bar end links are stronger and more durable than OEM links. BD end links are made with a high strength, heat treated forged steel center section that is black Cerakote finished for longevity. Utilizing an oversized ball joint and tough poly bushings, these heavy duty end links can tolerate higher loads that would cause the stock parts to break and wear rapidly. The ball joint allows for greater articulation than bushing only replacement end links can which prolongs the bushing life and allows for normal sway bar movement. All components are designed to be easily serviceable and wear items are low cost to replace. This makes the BD sway bar end links the obvious choice when it comes time to replace the worn-out factory end links.
Installation Instructions- Trucks lifted more than 3-inches will require sway bar offset spacer which is typically included in most lift kits
- HD Polyurethane Bushing With Steel Sleeve For Connection To Axle
- Oversize Ball Joint For Higher Load Capability And Longer Life
- Super strong forged and heat-treated end link center section
- All Components Are Designed To Be Easily Serviceable
- Can Quickly Be Installed In Approximately 1-Hour
- Ideal For Stock Height To 2-Inch Suspension Lift
- Service Kit Available P/N 1312068
- Gas And Diesel
- Gas & Diesel
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2013-2025 | Ram | 2500 | Big Horn |
| 2013-2025 | Ram | 2500 | Laramie |
| 2014-2015 | Ram | 2500 | Laramie Limited |
| 2013-2021 | Ram | 2500 | Laramie Longhorn |
| 2016-2025 | Ram | 2500 | Limited |
| 2021-2025 | Ram | 2500 | Limited Longhorn |
| 2013-2015,2019-2025 | Ram | 2500 | Lone Star |
| 2013-2016 | Ram | 2500 | Outdoorsman |
| 2013-2025 | Ram | 2500 | Power Wagon |
| 2023-2025 | Ram | 2500 | Rebel |
| 2013-2018 | Ram | 2500 | SLT |
| 2024-2025 | Ram | 2500 | Special Service |
| 2013 | Ram | 2500 | ST |
| 2013-2025 | Ram | 2500 | Tradesman |
| 2013-2025 | Ram | 3500 | Big Horn |
| 2013-2025 | Ram | 3500 | Laramie |
| 2014-2015 | Ram | 3500 | Laramie Limited |
| 2013-2020 | Ram | 3500 | Laramie Longhorn |
| 2016-2025 | Ram | 3500 | Limited |
| 2021-2025 | Ram | 3500 | Limited Longhorn |
| 2013-2015,2017,2019-2022 | Ram | 3500 | Lone Star |
| 2013-2024 | Ram | 3500 | SLT |
| 2024-2025 | Ram | 3500 | Special Service |
| 2013 | Ram | 3500 | ST |
| 2013-2025 | Ram | 3500 | Tradesman |
This BBK Performance short mid pipe is specifically designed to be used with BBK CNC series long tube exhaust headers for the 2015-2023 Mustang 5.0 GT to complete installation to your factory resonator box or resonator delete X pipe.These mid pipes are made from CNC mandrel bent 3.0 inch Tubing and feature high flow catalytic converters and a merged step down to allow installation to the factory exhaust system. Each BBK mid X pipe offers performance, quality and value that guarantees years of top performance for your Ford Mustang.Required for installation of BBK Long Tubes 1633, 16330, 16335, 1856, 18560 etc
- 3" CNC Mandrel Bent Aluminized Steel Tubing - High Flow Catalytic Converters Installed
- Made In The USA
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2019-2020 | Ford | Mustang | Bullitt |
| 2015-2023 | Ford | Mustang | EcoBoost |
| 2015-2023 | Ford | Mustang | EcoBoost Premium |
| 2011-2023 | Ford | Mustang | GT |
| 2015 | Ford | Mustang | GT 50 Years Limited Edition |
| 2015-2023 | Ford | Mustang | GT Premium |
| 2021-2023 | Ford | Mustang | Mach 1 |
| 2015-2020 | Ford | Mustang | Shelby GT350 |
| 2015-2020 | Ford | Mustang | Shelby GT350R |
| 2020-2022 | Ford | Mustang | Shelby GT500 |
| 2015-2017 | Ford | Mustang | V6 |
This BBK Performance short mid X pipe with catalytic converters is specifically designed to be used with BBK full Length Coyote Swap Long Tube exhaust headers 1634/16340 to complete the exhaust installation to your cars cat back exhaust system. This BBK mid pipe is designed and built with 3.00" CNC mandrel bent stainless tubing and high flow catalytic converters for maximum exhaust flow . All BBK mid pipes feature ball and socket style connectors for simple installation and adjustment for good ground clearance. The BBK merged X center section crossover is designed to maximize the exhaust flow potential of your Mustangs high performance engine to get the maximum horsepower and torque available to the ground. Every BBK mid X pipe offers performance, quality and value that guarantees years of top performance for your Mustang.Designed to fit BBK full Length Coyote swap headers for 1979 -2004 Ford Mustang Applications - BBK part numbers 1634, 16340
- High Flow Catalytic Converters - CNC Mandrel Tubing For Maximum Exhaust Flow
- Made In The USA
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 1994-2004 | Ford | Mustang | Base |
| 1986-2004 | Ford | Mustang | GT |
| 2001 | Ford | Mustang | GT Bullitt |
| 1995 | Ford | Mustang | GTS |
| 1986-1993 | Ford | Mustang | LX |
| 2003-2004 | Ford | Mustang | Mach 1 |
| 1993-1999,2001,2003-2004 | Ford | Mustang | SVT Cobra |
| 2003 | Ford | Mustang | SVT Cobra 10th Anniversary |
| 1993,1995,2000 | Ford | Mustang | SVT Cobra R |
BBK High Flow performance X pipes are designed to maximize the horsepower and torque of your 1994-1995 Ford Mustang 5.0. Every BBK Performance X pipe is designed as a direct replacement for the factory pipe and features larger diameter 16 gauge 2-1/2 in. CNC mandrel bent aluminized steel tubing with a unique BBK center X section for improved exhaust extraction, along with high flow catalytic converters to help increase exhaust flow and maximize performance to the rear wheels. These BBK full catted X pipes will install directly to the factory shorty exhaust headers or any aftermarket shorty exhaust and feature factory O2 sensor placement for simple direct installation. A BBK catted X pipe is the best way to really improve your Mustangs exhaust flow over the restrictive factory pipe to increase overall performance, plus it will sound great with an additional V8 muscle car growl. Please Note. This BBK product is not legal for use in some states including California: Please check your local emission laws and requirements.
- High Flow Catalytic Converters for Maximum Exhaust Flow - Direct Replacement - Mandrel Bent Stainless Tubing
- Made In The USA
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 1994-1995 | Ford | Mustang | GT |
| 1995 | Ford | Mustang | GTS |
| 1994-1995 | Ford | Mustang | SVT Cobra |
The BAKFlip MX4 TS from RealTruck is our #1 best-selling truck bed cover with easy rack compatibility. This top-of-the-line hard-folding cover is engineered to combine versatility and resilience, making it the ideal choice for truck owners who demand performance from their vehicles. While the BAKFlip MX4 TS sets the standard for keeping your cargo on lockdown, it raises the bar for versatility. Integrated T-slot channels in the bed rails make it easier than ever to add aftermarket crossbars, racks, cargo baskets, carriers, and a variety of cargo accessories in an instant. When was the last time you made perfect use of the space above your truck bed? The BAKFlip MX4 TS truck bed cover features a low-profile design constructed from the highest quality materials, including heavy-duty aluminum top panels finished with a matte black specialty automotive coating that’s scratch and dent-resistant and practically immune to UV-fading. Unlike comparable soft-folding covers, you can't slice through this cover with a pocketknife. The BAKFlip MX4 TS sits low and flush with your truck's bed caps yet offers heavyweight cargo protection for whatever you haul. With the BAKFlip MX4 TS, full bed access is always quick and easy. Just flip the panels forward to the cab, engage the integrated prop rods to secure the cover, and you’re ready to go. Whether you’re exploring the wilderness, out on a family adventure, or hauling gear to the job site, you’re guaranteed that your bed cover will perform.
Installation InstructionsInstallation Instructions
- Finished with a specialty automotive coating that absorbs impacts, resists dents, scuffs, and scratches, and is fully UV-resistant to withstand years of use and abuse
- Constructed with heavy-duty aluminum top panels on precision-engineered rails for a bed cover capable of supporting more than 400lbs. of weight
- Integrated drainage tubes effectively route water away from the bed (minimal drilling required on select applications)
- Integrated T-slot channels make it easy to add racks, carriers, and a variety of cargo management accessories
- Integrated T Slot Channels Make It Easy To Add Racks Carriers And A Variety Of Cargo Management Accessories
- Extra-strong prop rods firmly secure cover in open position with premium rubber bumpers to protect the cab
- Extra Strong Prop Rods Firmly Secure Cover In Open Position With Premium Rubber Bumpers To Protect The Cab
- Finished With A Specialty Automotive Coating That Absorbs Impacts Resists Dents Scuffs And Scratches
- Folds forward to the cab granting easy, full-bed access without blocking the third brake light
- Folds Forward To The Cab Granting Easy Full Bed Access Without Blocking The Third Brake Light
- Durable rubber seals and molded end caps provide superior protection from the elements
- Smooth-functioning latch system provides secure closure and effortless operation
- Smooth Functioning Latch System Provides Secure Closure And Effortless Operation
- Constructed With Heavy Duty Aluminum Top Panels On Precision Engineered Rails
- Bed stake pockets are left open for additional accessory installation
- Integrated Drainage Tubes Effectively Route Water Away From The Bed
- Limited five-year warranty
- Limited Five Year Warranty
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2016-2023 | Toyota | Tacoma | Limited |
| 2016-2023 | Toyota | Tacoma | SR |
| 2016-2023 | Toyota | Tacoma | SR5 |
| 2021 | Toyota | Tacoma | Trail |
| 2023 | Toyota | Tacoma | Trail Special Edition |
| 2016-2023 | Toyota | Tacoma | TRD Off-Road |
| 2017-2023 | Toyota | Tacoma | TRD Pro |
| 2016-2023 | Toyota | Tacoma | TRD Sport |
For those who like it raw and rowdy, the Track Edition is for you. The Track Edition shares the same integrated front pipe, bespoke mid pipe resonator, and precision engineering as its Touring Edition counterpart, minus AWE’s patented drone-canceling solution, 180 Technology®. In place of the 180 Technology® resonator in the rear lies a Track Edition straight section. As a result, this version is known to get (really) rowdy in mid range acceleration and deceleration, and may be too much for many. You've been warned. What if it's too loud after I bought it? What if I want three tips not two? AWE made it easy to convert between Track and Touring Editions, as well as dual and triple tip configurations, if you decide at a later date to change your volume or the aesthetic. Easy. Important notes: The system includes a 3” front pipe that is designed and sized accordingly to mate to the factory downpipe or any downpipe designed to mate to the factory exhaust. This front pipe is integrated into the design of the exhausts. AWE exhausts are not designed to mate with other aftermarket front pipes. We decided to reuse the factory-style flange and gasket for reliability and long-term performance. The factory's double-layer steel gasket design is vastly superior to any aftermarket flat gasket. This design allows for the gasket to be fully captured by the machined groove in the flange, eliminating any possibility of blowout or deterioration over long-term use. Additionally, it is fully serviceable, unlike a flat gasket that can stick to the mating flanges and tear upon removal. Each exhaust comes complete with three 4.5” double-walled, slash-cut tips available in Chrome Silver or Diamond Black, and feature a stamped AWE logo. All tips are individually adjustable, allowing depth into the bumper to be set according to personal taste. Let's get some sin in that Civic.
- Handcrafted from 3” CNC mandrel-bent, U.S.-sourced .065” wall T304L stainless steel
- Triple 4.5" double-walled slash-cut tips available in Diamond Black or Chrome Silver
- Less is more: clean, straight-through design maximizes performance
- Proudly designed, engineered, and manufactured at AWE in the USA
- Max gains of 6 hp and 1 lb-ft of torque at the wheels
- Integrated front pipe included in all editions
- Direct bolt-on for factory-like simplicity
- Perfect fitment guaranteed
- AWE No CEL guarantee
- Lifetime Warranty
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2020 | Honda | Civic | Si |
For those who like it raw and rowdy, the Track Edition is for you. The Track Edition shares the same integrated front pipe, bespoke mid pipe resonator, and precision engineering as its Touring Edition counterpart, minus AWE’s patented drone-canceling solution, 180 Technology®. In place of the 180 Technology® resonator in the rear lies a Track Edition straight section. As a result, this version is known to get (really) rowdy in mid range acceleration and deceleration, and may be too much for many. You've been warned. What if it's too loud after I bought it? What if I want three tips not two? AWE made it easy to convert between Track and Touring Editions, as well as dual and triple tip configurations, if you decide at a later date to change your volume or the aesthetic. Easy. Important notes: The system includes a 3” front pipe that is designed and sized accordingly to mate to the factory downpipe or any downpipe designed to mate to the factory exhaust. This front pipe is integrated into the design of the exhausts. AWE exhausts are not designed to mate with other aftermarket front pipes. We decided to reuse the factory-style flange and gasket for reliability and long-term performance. The factory's double-layer steel gasket design is vastly superior to any aftermarket flat gasket. This design allows for the gasket to be fully captured by the machined groove in the flange, eliminating any possibility of blowout or deterioration over long-term use. Additionally, it is fully serviceable, unlike a flat gasket that can stick to the mating flanges and tear upon removal. Each exhaust comes complete with two 4.5” double-walled, slash-cut tips available in Chrome Silver or Diamond Black, and feature a stamped AWE logo. All tips are individually adjustable, allowing depth into the bumper to be set according to personal taste. Let's get some sin in that Civic.
- Handcrafted from 3” CNC mandrel-bent, U.S.-sourced .065” wall T304L stainless steel
- Dual 4.5" double-walled slash-cut tips available in Diamond Black or Chrome Silver
- Less is more: clean, straight-through design maximizes performance
- Proudly designed, engineered, and manufactured at AWE in the USA
- Ability to upgrade to the "trident" tip configuration any time
- Max gains of 6 hp and 1 lb-ft of torque at the wheels
- Integrated front pipe included in all editions
- Direct bolt-on for factory-like simplicity
- Perfect fitment guaranteed
- AWE No CEL guarantee
- Lifetime Warranty
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2020 | Honda | Civic | Si |
Quite frankly, we were shocked at how exotic the 5-cylinder motor became after installing the AWE Cat Back exhaust system. This exhaust unlocks ~8hp at the crank, as well as giving the 2.5L engine a voice that turns heads. There is no interior drone at any RPM and sound volume (interior and exterior) is quite civilized - while still being noticable. The 2.5L Cat Back was designed with performance and longevity in mind, and features mandrel-bent 2.5 inch diameter tubing, thick .065" wall T304L stainless steel, double walled adjustable AWE exhaust tips to reduce heat discoloration, and performance verified on the AWE in house Mustang dyno.
- T304L Stainless Steel construction
- Perfect Fitment - Guaranteed
- Deep and muscular sound
- Adds 8hp at the crank
- Lifetime Guarantee
- No CEL Guarantee
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2010-2013 | Volkswagen | Golf | Base |
| 2006-2007 | Volkswagen | Rabbit | 2.5 |
| 2008-2009 | Volkswagen | Rabbit | S |
$41.05
$11.95
The Threaded Socket Surface Mount provides a replacement for your ARB Fridge Freezer.
Warranty- Supplied w/ARB Designed Surface Mount Housing
- Perfect Partner For Fridge Screw In DC Cord
- Wire Entry Cut Outs In Three Locations
- Incl. Path To Reduce Condensation
- O-Ring Seal Reduces Water Ingress
$152.00
Tail Light Assembly, Clear Lens, Black Housing, Pair, . Guaranteed To Improve Your Vehicles Appearance. Rigorously Tested For Fit And Function. Simple Plug And Play. No Modifications Required. Easy Installation Using Common Hand Tools. Uses Stock Mounting Locations And Hardware. D.O.T. Compliant To S.A.E. Standards. Sold As A Pair. GT And GTS Models Only.
Catalog- 1 Year Warranty Covering Any Manufacturers Defects
- Guaranteed To Improve Your Vehicles Appearance
- Uses Stock Mounting Locations And Hardware
- Easy Installation Using Common Hand Tools
- Rigorously Tested For Fit And Function
- D.O.T. Compliant To S.A.E. Standards
- No Modifications Required
- Simple Plug And Play
- Sold As A Pair
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2000-2005 | Toyota | Celica | GT |
| 2000-2005 | Toyota | Celica | GTS |
$352.00
Projector Headlight Set, w/Halo, Clear Lens, Chrome Housing, Pair, . Guaranteed To Improve Your Vehicles Appearance. Rigorously Tested For Fit And Function. Simple Plug And Play. No Modifications Required. Easy Installation Using Common Hand Tools. Uses Stock Mounting Locations And Hardware. D.O.T. Compliant To S.A.E. Standards. Sold As A Pair. Does Not Fit Ram Models With Sport Package.
Installation InstructionsCatalog
- 1 Year Warranty Covering Any Manufacturers Defects
- Guaranteed To Improve Your Vehicles Appearance
- Uses Stock Mounting Locations And Hardware
- Easy Installation Using Common Hand Tools
- Rigorously Tested For Fit And Function
- D.O.T. Compliant To S.A.E. Standards
- No Modifications Required
- Simple Plug And Play
- Sold As A Pair
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 1994-1996 | Dodge | Ram 1500 | Base |
| 1997-2001 | Dodge | Ram 1500 | Laramie |
| 1997 | Dodge | Ram 1500 | LT |
| 1997-2001 | Dodge | Ram 1500 | ST |
| 1997-2001 | Dodge | Ram 1500 | WS |
| 1994-2002 | Dodge | Ram 2500 | Base |
| 1994-2002 | Dodge | Ram 3500 | Base |
$884.00
This 7” tall 360-degree radial flow air filter features a 5-1/2" by 7-1/2" flange and our pre-oiled Pro 5R media with five layers of progressively finer cotton gauze media for maximum performance. It provides your engine with the largest amount of high-flowing air and delivers the highest power gains in most cases. This media is perfect for street and/or track use. The included massive air filter is surrounded by an open-element XLPE (cross-linked polyethylene) polymer housing that minimizes warm engine air for maximum performance. Its open design allows for easy viewing of the air filter and delivers an aggressive Air Intake sound. Multiple air inlets bring in cool air when under power without capturing any warm air surrounding the engine. The factory MUA (Multi-Air Unit Actuator) is easily transferred to the aFe POWER housing to guarantee correct crankcase flow, avoiding check engine lights and damaging factory hoses and sensors. All hoses, clamps, and screws are provided to connect to the aFe POWER tube and secure the MUA to the aFe POWER housing. The lightweight tube is computer-designed to achieve maximum power gains while maintaining a perfect fit. Manufactured from 100% twill weave carbon fiber, it features zero fiberglass and is clear-coated for the highest quality construction. This is a direct fit intake system that utilizes factory mounting points. All necessary stainless-steel clamps, silicone coupling, and hardware are included. Its revolutionary design, featuring our patent pending filter-to-housing interface, uses half the number of parts of a traditional cold air intake system. For Dodge Durango SRT Hellcat models, the air filter sits right under the SRT hood vent. aFe Power recommends purchasing 28-10303 pre-filter to protect the air filter from rain and other elements. aFe Power strongly recommends avoiding pressure washing around the hood vent and driving under heavy rain.
Installation Instructions- With carbon fiber components, impressive power gains, and an aggressive supercharger whine, the Track Series was made for performance enthusiasts like you.
- Open-Element Design Showcases the Air Filter and Delivers an Aggressive Air Intake Sound
- Intake is Designed to Work With The Factory Multi-Air Unit Actuator (MUA)
- Massive Airbox Adds an Extra Air Inlet for Cooler Air Intake Temperatures
- Washable and Reusable Pro 5R Air Filter for Maximum Performance
- Dyno-Proven Gains up to +36 HP & +35 Lbs. x Ft. TQ
- Lightweight, 100% Carbon Fiber Intake Tube
- Measured Flow: 780 CFM @ 7" H2O
- Outflows Factory Intake by 30%
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021,2023-2024 | Dodge | Durango | SRT Hellcat |
| 2019-2021 | Jeep | Grand Cherokee | Trackhawk |
$354.00
One-Piece Housing: The included massive air filter is surrounded by an open-element XLPE (cross-linked polyethylene) polymer housing that minimizes warm engine air for maximum performance. Its open design allows for easy viewing of the air filter, yet creates a heat-blocking seal when the vehicle's hood is closed. It utilizes the vehicle's OE air inlet with no additional hardware. An additional auxiliary air inlet is available for use to bring in air from the front of the vehicle when under power, or can be closed with an included plug if desired.
Installation Instructions- Open-Element Design Allows For Viewing of Massive Air Filter
- Washable and Reusable Pro 5R Air Filter for Maximum Air Flow
- Seals to Hood to Reduce Intake Air Temperature
- Built-In Scoop Provides Increased Air Flow
- Measured Flow: 325 CFM @ 7 IN H2O
- Outflows Factory Intake by 71%
- +9 HP & +8 Lbs. x Ft. TQ
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2014-2016 | Mazda | 3 | i Grand Touring |
| 2014-2016 | Mazda | 3 | I Sport |
| 2014-2015 | Mazda | 3 | i SV |
| 2014-2016 | Mazda | 3 | I Touring |
| 2017-2018 | Mazda | 3 | Sport |
| 2017-2018 | Mazda | 3 | Touring |
$365.00
Large Three Layer Performance Air Filter: This 360-degree radial flow air filter features a 3-1/2" flange and our oil-free Pro DRY S media with three layers of synthetic media for maximum convenience. Its progressive layering provides great filtration efficiency and dust holding capacity, while not requiring the use of oils. This media is best suited for street use. Its inverted top makes for more filter surface area, resulting in longer service intervals.One-Piece Housing: The included massive air filter is surrounded by an open-element XLPE (cross-linked polyethylene) polymer housing that minimizes warm engine air for maximum performance. Its open design allows for easy viewing of the air filter, yet creates a heat-blocking seal when the vehicle's hood is closed. A larger, upgraded air inlet captures air from the factory scoop and delivers it directly to the air filter.Dyno-Tuned Intake Tube: This system features a high quality, computer-designed, dyno-tuned intake tube to achieve maximum power gains while maintaining a perfect fit. Its XLPE material is heat soak resistant and extremely durable.Hassle-Free Installation: This is a direct fit intake system that utilizes factory mounting points and requires no cutting or modifications. All necessary clamps, couplings, and hardware are included. Its revolutionary design, featuring our patent pending filter-to-housing interface, uses half the number of parts of a traditional cold air intake system.
Installation Instructions- Open-Element Design Allows For Viewing of Massive Air Filter, Yet Seals When Hood is Closed to Keep Out Hot Air
- Washable and Reusable Pro DRY S Air Filter for Maximum Convenience
- Measured Flow: 250 CFM @ 7 IN H2O
- Outflows Factory Intake by 14%
- +6 lbs. x ft. TQ & +5 HP
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2016-2020 | Honda | Civic | EX |
| 2016-2021 | Honda | Civic | LX |
| 2016-2018 | Honda | Civic | LX-P |
| 2019-2021 | Honda | Civic | Sport |
| 2017-2019 | Honda | Civic | Type R |
$845.00
Dual 360-degree radial flow air filters feature our oil-free Pro DRY S media with three layers of synthetic media for maximum convenience. Their progressive layering provides great filtration efficiency and dust holding capacity, while not requiring the use of oils. This media is best suited for street use. Their inverted tops make for more filter surface area, resulting in longer service intervals. The smooth housing, constructed of cross-linked polyethylene (XLPE), is used to minimize the number of components and ensure the coolest air intake charge available. The housing utilizes the factory OE air inlets. A vacuum-formed removable cover seals the system, ensuring cool air delivery to the engine, but can also be removed for extra air flow if desired. This system features a high quality, computer-designed, dyno-tuned intake tube to achieve maximum power gains while maintaining a perfect fit. Its XLPE material is heat soak resistant and extremely durable. The computer designed system utilizes factory mounting locations, minimizing the use of unnecessary hardware and ensuring a perfect fit every time. Its innovative design makes for a hassle-free, direct bolt-on installation process that requires no cutting or drilling. In 2020, Porsche created a recall to add a heat shield in the engine compartment under the air box. The heat shield is to prevent foreign objects left in the engine compartment to make contact with hot exhaust system components and ignite. aFe POWER housing will currently not fit with the heat shield added after the recall. aFe POWER is working on making an update to the housing to allow fitment with this heat shield.
- With exposed hardware and a motorsport inspired design, this Stage-2 Si's aggressive dual air filter design is sure to draw attention.
- Washable and Reusable Pro DRY S Air Filters for Maximum Convenience
- Aggressive Dual Air Filter Design with Vacuum-Formed Housing Cover
- Utilizes Factory Mounting Locations and Incorporates OE Air Inlets
- Custom aFe POWER Laser-Etched Stainless Steel Washers and Bolts
- Dyno-Proven Gains up to +15 HP & +13 Lbs. x Ft. TQ
- Measured Flow: 580 CFM @ 7" H2O
- Outflows Factory Intake by 7%
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2014 | Porsche | 911 | 50th Anniversary Edition |
| 2012-2016 | Porsche | 911 | Carrera |
| 2013-2016 | Porsche | 911 | Carrera 4 |
| 2016 | Porsche | 911 | Carrera 4 Black Edition |
| 2015-2016 | Porsche | 911 | Carrera 4 GTS |
| 2013-2016 | Porsche | 911 | Carrera 4S |
| 2016 | Porsche | 911 | Carrera Black Edition |
| 2015-2016 | Porsche | 911 | Carrera GTS |
| 2012-2016 | Porsche | 911 | Carrera S |
| 2014-2016 | Porsche | 911 | GT3 |
| 2014-2016 | Porsche | 911 | Targa 4 |
| 2016 | Porsche | 911 | Targa 4 GTS |
| 2014-2016 | Porsche | 911 | Targa 4S |
| 2014-2015 | Porsche | 911 | Turbo |
| 2014-2015 | Porsche | 911 | Turbo S |
$82.00
Quantum Cold Air Intake System Dynamic Air Scoop (D.A.S.) increases cool, fresh airflow for maximum performance and throttle response for your Ford F-150 & Raptor. It is designed to capture the coolest, freshest air from the top of the front grille to ensure increased air velocity into your air intake system. Lower Intake Air Temperatures: This Dynamic Air Scoop guides cool ambient air from outside the vehicle directly into your intake system. The cool dense air allows your vehicle to run more efficiently, increasing performance. Durable LLDPE Construction: This D.A.S. is constructed from high-quality linear low-density polyethylene (LLDPE) that is impact resistant, extremely durable, and 100% recyclable. Hassle-Free Installation: The 53-10008SR Dynamic Air Scoop fits the factory systems, as well as aFe POWER’s Quantum and Magnum FORCE Stage-2 intakes. It does NOT fit aFe POWER Momentum intake systems. This part easily snaps into the air box and requires no modification to your vehicle. Emissions Disclaimer: This product does not require a CARB EO#.
Installation Instructions- Quickly Snaps Into Air Box and All necessary hardware included for a Hassle-Free Installation
- Designed to fit factory intakes as well as aFe POWER's Quantum and Magnum FORCE Stage-2
- Durable, Impact-Resistant LLDPE Polymer Construction, Color: Red
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2015-2020 | Ford | F-150 | King Ranch |
| 2015-2020 | Ford | F-150 | Lariat |
| 2016-2020 | Ford | F-150 | Limited |
| 2015-2020 | Ford | F-150 | Platinum |
| 2018-2020 | Ford | F-150 | Police Responder |
| 2017-2020 | Ford | F-150 | Raptor |
| 2016-2020 | Ford | F-150 | SSV |
| 2015-2020 | Ford | F-150 | XL |
| 2015-2020 | Ford | F-150 | XLT |
$646.00
These 6” tall 360-degree radial flow air filters feature a 3.5" flange and our pre-oiled Black Pro 5R media with five layers of progressively finer cotton gauze media for maximum performance. They provide your engine with the largest amount of high-flowing air, usually resulting in the highest power gains out of all our filter media options. Their inverted bullet-style top makes for more filter surface area, resulting in longer service intervals. This media is perfect for street and/or track use. Momentum’s innovative filter-to-housing interface was built to feature the largest air filter possible. Once the system is installed, the air filters can be easily removed from the housing for maintenance by uninstalling the intake tube. The smooth one-piece sealed housing, constructed of heat-resistant red cross-linked polyethylene (XLPE), features our patent-pending filter-to-housing interface. Its innovative design minimizes the total number of parts, making for an easy installation. A large, clear sight window allows for hassle-free filter inspection, without having to disassemble your system. The housing incorporates the factory air inlet scoop, using no additional hardware. This system features high quality, computer-designed, dyno-tuned intake tubes to achieve maximum power gains while maintaining a perfect fit. Its red XLPE material is heat soak resistant and extremely durable. Stainless-steel clamps are included for strength, and premium silicone couplings are used for durability while also providing the most secure installation available. Aluminum and Nylon vacuum fitting are included for a perfect fit and finish. Momentum GT intakes are designed with fewer parts for a fast and easy installation.
Installation Instructions- Durable Red XLPE Construction and Sealed Housing Protects From Impact, Extreme Temperatures, and Other Elements
- Washable and Reusable Black Oiled Pro 5R Air Filters for Maximum Performance
- Clear Sight Window for Convenient Filter Inspection Without Disassembly
- Premium Stainless Clamps and Silicone Couplings Provide a Secure Seal
- Innovative Filter-to-Housing Interface for Easy Installation
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2024 | Ford | Explorer | King Ranch |
| 2020-2026 | Ford | Explorer | Platinum |
| 2020-2026 | Ford | Explorer | ST |
| 2020-2023 | Lincoln | Aviator | Base |
| 2020-2025 | Lincoln | Aviator | Black Label |
| 2020-2023 | Lincoln | Aviator | Black Label Grand Touring |
| 2020-2023 | Lincoln | Aviator | Grand Touring |
| 2022-2025 | Lincoln | Aviator | Livery |
| 2024-2025 | Lincoln | Aviator | Premiere |
| 2020-2025 | Lincoln | Aviator | Reserve |
$1,684.00
This cat-back exhaust system is constructed of 2-1/2 IN mandrel-bent brushed finished 304 stainless steel tubing for maximum strength and durability. Finishing off this exhaust system are dual 4-1/2 IN diameter carbon fiber stainless steel clamp-on exhaust tips. The tips feature an aFe POWER logo for a unique style. This system produces an aggressive sound unleashing all available horsepower and torque. Utilizing factory style flanges and hangers this system is a direct bolt-on system, which requires no cutting or modifications for a hassle-free installation. This cat-back exhaust system uses a heavy duty flex pipe with an internal interlock liner for added strength and durability. This system features a crossover balance tube designed to equalize and distribute exhaust pulses reducing drone, and improving sound. State-of-the-art computer-aided design technology is utilized for precise vehicle fitment. 100% TIG-Welded for race-proven strength and durability.
- Dual 4-1/2 IN Diameter Carbon Fiber Stainless Steel Clamp-On Exhaust Tips
- All Necessary Hardware is Included for a Hassle-Free Installation
- Utilizes Factory Style Flanges and Hangers for a Secure Fit
- 100% TIG-Welded for Strength and Durability
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2025 | Nissan | Z | Nismo |
| 2023-2025 | Nissan | Z | Performance |
| 2023 | Nissan | Z | Proto Spec |
| 2023-2025 | Nissan | Z | Sport |
$689.00
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2015-2016 | Ford | F-150 | King Ranch |
| 2015-2016 | Ford | F-150 | Lariat |
| 2016 | Ford | F-150 | Limited |
| 2015-2016 | Ford | F-150 | Platinum |
| 2016 | Ford | F-150 | SSV |
| 2015-2016 | Ford | F-150 | XL |
| 2015-2016 | Ford | F-150 | XLT |
$97.00
Constructed with 100-percent polyurethane boxed frame, this non-oiled OE replacement filter provides years of hassle free service. Three Layers of Progressive Synthetic (Dry) Media for Maximum Convenience. Washable and reusable for multiple cleaning cycles, the tall open evenly spaced pleats provide excellent dust holding capacity for longer service cycle between cleanings. Integrated urethane bump seal insures tight, no leak seal over the life of the filter.
- Progressive Bump Seal Design For A Perfect Fit
- 3 Layers of Progressive Synthetic (Dry) Media
- Made From 100% 55-Shore A Polyurethane
- Limited Lifetime Warranty
- Hassle Free Installation
- OE Direct Replacement
- Washable And Reusable
- 35mm Deep Pleats
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2022-2025 | BMW | M240i xDrive | Base |
| 2020-2025 | BMW | M340i | Base |
| 2020-2024 | BMW | M340i xDrive | Base |
| 2021-2025 | BMW | M440i | Base |
| 2021-2025 | BMW | M440i xDrive | Base |
| 2022-2025 | BMW | M440i xDrive Gran Coupe | Base |
| 2022-2025 | BMW | Z4 | M40i |
| 2020 | BMW | Z4 | M40i First Edition |
| 2020-2021 | BMW | Z4 | sDrive M40i |
| 2024 | Toyota | GR Supra | 45th Anniversary Edition |
| 2021-2022 | Toyota | GR Supra | A91 Edition |
| 2023 | Toyota | GR Supra | A91-MT Edition |
| 2020-2025 | Toyota | GR Supra | Base |
| 2020 | Toyota | GR Supra | Launch Edition |
| 2020-2025 | Toyota | GR Supra | Premium |
$76.00
This filter features three layers of oil-free synthetic media and requires no oil during maintenance to provide maximum convenience. Its progressive layering provides great filtration efficiency and dust holding capacity. This media is best suited for street use. Pro DRY S filters are easily recharged with aFe's POWER CLEANER. aFe POWER performance air filters use a rounded, evenly spaced pleat design which allows for more usable filter surface area, providing increased flow and greater dust holding capacity. This pliable sealing surface conforms to even the most uneven filter housing, making for a perfect filter fit and sealing surface every time. This design eliminates the use of gaskets or sealants and always goes back to its original form. All aFe POWER flat panel performance air filters are constructed with a full 360-degree polyurethane frame. Unlike other materials that degrade after repeated heat cycles in an engine bay, polyurethane maintains its original molded shape.
- Pro DRY S Filter Media Features Three Layers of Progressive Synthetic (Dry) Media for Maximum Convenience
- Deep, Open Pleats Allow for Increased Surface Area, Flow, and Dust Holding Capacity
- Progressive Bump Seal Design for a Perfect Fit and Sealing Surface Every Time
- 100% Polyurethane Frame on All Sides for Extra Long Filter Life
- Washable and Reusable for Multiple Cleaning Cycles
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2022-2026 | Hyundai | Elantra N | Base |
$1,512.65
Aeromotive Inc. is a true high performance aftermarket manufacturer specializing in fuel delivery and fuel delivery components. Utilizing aerospace tolerances and procedures, three generations of track experience, and a meticulous approach to engineering, Aeromotive Fuel Systems has become the absolute pinnacle of performance fuel delivery.
Installation InstructionsThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2016-2019 | Cadillac | ATS | V |
| 2016-2019 | Cadillac | CTS | V |
| 2016-2022 | Chevrolet | Camaro | LT |
| 2016-2022 | Chevrolet | Camaro | SS |
Showing 630/25001
Explore Related Collections
- Choosing a selection results in a full page refresh.
- Opens in a new window.