SPC Performance EZ ON HD centering sleeves provide a precise solution for wheel-end runout on heavy-duty steer wheels and brake drums. By centering both the wheel and the drum to the hub, these sleeves minimize common ride quality issues including wheel vibrations, brake pedal pulsations, and wheel hop.

The unique threadless design allows for rapid installation, significantly reducing service time compared to traditional threaded options. These sleeves are an essential shop tool for ensuring proper alignment of rotating components, helping to improve tire wear and braking consistency by ensuring the wheel and drum stay perfectly concentric to the hub.

• Manufacturer Part Number: 32126
• Design: Threadless EZ ON for rapid centering
• Compatibility: 1.34" to 1.37" hole diameters
• Sleeve Depth: 0.5"
• Quantity: Pack of 6 sleeves
• Function: Eliminates vibration and pulsation caused by off-center mounting

Fits 2021-2026 Ford Bronco (including Badlands, Raptor, Wildtrak, and Heritage Edition).

Engineered to restore driveability and alignment on lifted vehicles, these SPC Performance adjustable upper control arms provide the necessary caster and camber correction to eliminate wandering and uneven tire wear. The forged steel and chromoly design provides superior strength for off-road environments while increasing clearance around the spring bucket to accommodate oversized tires.

This kit features SPC’s patented maintenance-free ball joints, which offer up to 80° of articulation—a 25% larger stud cross-section than OE for increased durability. The inclusion of xAxis™ sealed flex joints in bonded rubber sleeves ensures full suspension travel and factory-level NVH (Noise, Vibration, and Harshness) characteristics. Each arm is finished with an E-Nickel coating for maximum corrosion protection in harsh climates.

• Adjustment Range: Front Camber ±2.00˚ / Caster -1.00˚ to +3.00˚
• Articulation: 80° Ball Joint range of motion
• Construction: Forged steel with chromoly tubing and billet machined steel nose
• Joints: Sealed xAxis™ flex joints and maintenance-free greaseable ball joints
• Hardware: Sold as a pair (1 per axle required)
• Compatibility: Extended threads for knuckle gusset kit compatibility
• MPN: 35690

The SPC Performance Pro Series Front Adjustable Upper Control Arm (92054) provides the precise suspension geometry tuning required for competitive racing. Designed for GM Full Size chassis, this adjustable arm allows for granular control over alignment settings to maximize cornering performance and tire efficiency on the track.

• Includes 5-inch adjusting sleeves for quick, accurate track-side length modifications
• Features a dedicated GM Full Size ball joint plate for robust component integration
• High-strength rod ends replace factory bushings to eliminate deflection and improve steering response
• Race-only construction designed specifically for high-stress competition environments
• Manufacturer Part Number: 92054

Note: This component is engineered for competition use only and is not intended for street-driven vehicles.

Fits Honda K-Series engines.

Skunk2 Ultra Series Intake and Exhaust Port Covers provide a professional and secure solution for engine builders, head porters, and racers needing to protect cylinder head surfaces during transportation or long-term storage. Unlike temporary solutions like rags or tape, these billet covers seal out debris and prevent accidental damage to precision-machined valve seats and port mating surfaces.

Designed for the high-stakes environment of drag racing and custom engine building, these covers ensure that hand-ported heads and expensive crate engines remain in pristine condition whether they are in a race trailer, workshop, or being shipped globally. The precision machining ensures a clean fit across the port openings, effectively preventing tampering and environmental contamination.

• CNC-machined from billet aluminum for superior strength and durability
• Hard-anodized black finish for corrosion resistance and a professional look
• Engineered specifically for Honda K-Series intake and exhaust port patterns
• Protects critical valve seats and mating surfaces from debris and moisture
• Provides a secure alternative to stuffing ports with rags during storage
• Manufacturer Part Number: 666-05-0200

Ensure a reliable, high-pressure seal for your Honda K-Series K20C1 engine with this precision-engineered Skunk2 head gasket. Designed specifically for performance applications, this gasket maintains the structural integrity between the cylinder head and engine block, preventing combustion leaks and protecting your build under high-load conditions.

• Fits Honda K-Series K20C1 engines
• Bore Diameter: 87.00mm
• Gasket Thickness: 0.85mm
• Engineered for high-performance sealing and durability
• Manufacturer Part Number: 366-05-4700

Fits 1987-2006 Jeep Wrangler YJ and TJ models, including Sport, Sahara, Rubicon, and Unlimited. This Rugged Ridge Bug Deflector provides essential protection for your vehicle's leading hood edge and windshield against stone chips, road debris, and insects. By altering the airflow, it helps sweep bugs and small particles over the roof rather than into your glass.

Constructed from durable, shatter-resistant smoked acrylic, this deflector is built to withstand trail debris and highway speeds without cracking or fading. The dark smoked finish complements any paint color while providing a sleek, low-profile appearance. Installation is secure, utilizing a combination of high-bond double-sided tape and underhood screws to ensure the guard remains stable even in high-wind conditions.

• Fits Jeep Wrangler models from 1987 to 2006 (YJ/TJ)
• Manufactured from shatter-resistant smoked acrylic
• Installation uses automotive-grade tape and underhood screws
• Minor drilling required for a permanent, secure fit
• Manufacturer Part Number: 11350.01
• Backed by a Limited 5-Year Warranty

Fits 2016-2020 Lexus GS-F.

RS-R Best-i Active Series coilovers are engineered specifically for owners who want to lower their vehicle without sacrificing the factory Adaptive Variable Suspension (AVS) functionality. Unlike standard coilover kits that require an AVS delete, the Active series features specialized damper internals and mounting for the factory actuators, allowing you to maintain full control of your suspension modes from the cockpit.

Built to provide a balance of performance and comfort, these coilovers utilize high-quality internal components and refined valving to reduce body roll and improve steering response. The full-length adjustment design allows for independent ride height and spring preload settings, ensuring you can achieve the perfect stance while maintaining full suspension stroke.

• Retains factory Lexus Adaptive Variable Suspension (AVS) system compatibility
• Full-length height adjustment for precise corner balancing and stance
• High-quality steel construction with specialized coatings for corrosion resistance
• Specially formulated damper oil for consistent performance under high thermal loads
• Designed as a direct bolt-on replacement for factory struts and springs
• Manufacturer Part Number: XLIT997MA

Fits 2022-2024 Acura Integra. RS-R Down Sus springs provide a refined lowering solution for the 2022+ Acura Integra, balancing improved handling with daily-drive comfort. These H083D springs are designed to reduce fender gap and lower the vehicle's center of gravity without compromising the factory ride quality.

• Optimized spring rates for enhanced cornering stability and reduced body roll
• Provides a moderate drop for an improved aesthetic and aerodynamic profile
• Compatible with factory dampers to maintain OEM ride characteristics
• High-strength construction ensures minimal sag over the life of the vehicle
• Direct-fit replacement for factory coil springs
• Manufacturer Part Number: H083D

Fits 2007-2018 Jeep Wrangler JK models.

Strengthen your drivetrain with the Revolution Gear & Axle Discovery Series Front Axle Kit. These shafts are forged from high-strength chromoly steel, providing the increased torsional strength required to handle the stresses of larger tires and off-road articulation. Designed as a direct-fit replacement for factory components, this kit upgrades your front end with superior materials to prevent trail failures.

• Forged from 4340 chromoly steel for maximum durability
• Includes pre-installed heavy-duty U-joints for a complete installation
• Direct replacement for factory inner and outer front axle shafts
• Engineered specifically for the 2007-2018 Jeep Wrangler JK platform
• Manufacturer Part Number: DC-D30-JK-HD

Fits select 2005-2016 Ford F-250 Super Duty and 2014-2020 Ram 2500 models.

The Rancho RS9000XL series provides precise damping control for heavy-duty trucks used in towing, hauling, and off-road environments. Featuring a manual nine-position adjustment knob, these shocks allow you to quickly transition between a soft street ride and firm control for high-load or off-road conditions. The tri-tube body is filled with all-weather fluid to maintain consistent performance from -40 to 248°F, while nitrogen gas pressurization (45-60 PSI) prevents oil aeration and damping fade.

• Adjustable Performance: Nine-position knob allows for customized firmness and damping control.
• Heavy-Duty Construction: Up to 2.38-inch tri-tube body provides increased fluid capacity for cooler operation.
• Enhanced Durability: Dual-component 2K liquid metallic finish and a polyvinyl protective boot resist chips and corrosion.
• Smooth Operation: Graphite-filled fluon-banded piston and polyurethane bushings reduce friction and absorb road harshness.
• Part Number: RS994048

Fits select 1987-1995 Jeep Wrangler models.

Adjust your vehicle's pinion angle and restore proper driveline geometry after installing a lift kit or aftermarket suspension components with this Rancho leaf spring shim kit. These shims are specifically designed to correct the angle between the driveshaft and the differential, helping to eliminate vibration and prevent premature U-joint wear.

Precision-engineered from durable aluminum for long-term reliability, these shims measure 2.38 inches in width and provide a 2.5-degree correction angle. This kit includes a pair of shims to complete the installation on a single axle.

• Part Number: RS8125
• Shim Angle: 2.5 Degrees
• Width: 2.38 inches
• Material: Aluminum
• Quantity: Sold as a pair (2 shims)
• Warranty: Rancho limited one-year warranty

The Radium Engineering Fuel Hanger Plumbing Kit is a comprehensive upgrade designed to be used with a Radium in-tank fuel pump hanger. This kit provides a complete path from the fuel tank to the engine, replacing restrictive OEM fuel lines with high-flow upgraded lines and robust hardware. It is engineered for enthusiasts requiring increased fuel delivery and reliability for high-performance applications.

A critical component of this kit is the included dual-pressure regulator, which is capable of managing fuel pressure for both Direct Injection (DI) and Port Injection systems independently. To ensure maximum fuel cleanliness and longevity, the system utilizes a high-flow stainless steel filter element. The kit includes all necessary fittings, mounting brackets, and hardware to facilitate a professional installation.

• Direct replacement for OEM fuel lines when using Radium fuel pump hangers
• Integrated dual-pressure regulator supports both DI and Port injection systems
• High-capacity stainless steel fuel filter included
• Includes all necessary adapter fittings, brackets, and mounting hardware
• Designed specifically for the 10th Generation Honda Civic chassis
• Manufacturer Part Number: 20-1085-03

The Radium Engineering FCST-X Complete Refueling Kit (MPN 20-1841-03) provides a professional-grade solution for rapid, spill-free refueling of fuel cells equipped with the FCST-X Fuel Cell Surge Tank. This kit is engineered for competitive environments where pit stop efficiency and safety are critical.

• High-Speed Flow: Features a high-flow vent system designed to eliminate air pockets and allow for ultra-fast filling during timed stops.
• Dry-Break Safety: The 1.5-inch remote-mounted dry-break filler provides a secure, leak-proof connection, significantly reducing the risk of fuel spills in the paddock or pit lane.
• Integrated Pressure Relief: Includes a Pressure Relief Valve (PRV) to manage internal cell pressure effectively.
• Complete Setup: Comes with a 5-gallon dump can for high-volume delivery and all necessary hardware for remote mounting.

Fits select 2012-2015 Acura ILX and Honda Civic Si.

The Power Stop Z17 Autospecialty Stock Replacement Brake Kit (KOE6327) provides a complete, bolt-on solution for daily drivers needing reliable, noise-free stopping power. This comprehensive front and rear kit replaces worn factory components with mill-balanced rotors and low-dust ceramic pads, ensuring a smooth ride that meets original equipment standards.

• Z17 Evolution Plus Ceramic Pads: Formulated for low dust and noise, these pads feature multi-layer rubberized shims for quiet operation.
• Autospecialty Rotors: Non-coated OE-style replacement rotors are mill-balanced for vibration-free performance.
• Complete Hardware Kit: Includes stainless steel installation hardware and high-temperature ceramic brake lubricant.
• Direct Bolt-On: Engineered for simple installation with no vehicle modifications required.
• Verified Performance: Brake pad formula validated through 3rd party on-vehicle testing in heavy city traffic conditions.

Manufacturer Part Number: KOE6327

Fits select 2014-2024 Infiniti Q50, Q60, Q70, Q70L, and QX60 models. This Power Stop Z23 Evolution Sport Brake Upgrade Kit is designed as a complete, bolt-on solution to replace worn factory components and enhance braking performance on your daily driver.

This rear kit features the Z23 Carbon-Fiber Ceramic compound, engineered to significantly increase stopping power while maintaining a low-dust formula—validated in third-party testing to produce 30% less dust than original equipment. The included performance rotors are drilled and slotted for superior cooling and gas dissipation during heavy braking, while silver zinc plating provides a barrier against rust and corrosion. The kit is rounded out with red high-temp powder-coated calipers that provide a durable finish and a custom look behind your wheels.

• Carbon-Fiber Ceramic Z23 pads provide increased bite without the noise and dust of track pads
• Drilled and slotted rotors maintain lower temperatures and clear debris for consistent rotor contact
• Red powder-coated calipers resist corrosion and maintain a high-quality finish over time
• Multi-layer rubberized shims isolate noise for virtually silent operation
• Includes stainless steel installation hardware and high-temperature ceramic lubricant
• Direct bolt-on fitment requires no vehicle modifications
• Manufacturer Part Number: KC8021

Fits select 2012-2019 Chevrolet Silverado and GMC Sierra 2500 HD / 3500 HD models.

The Power Stop Z36 Truck & Tow Brake Upgrade Kit with Powder Coated Calipers is a complete front and rear solution for heavy-duty applications. Designed for trucks and 4x4s that tow trailers, haul heavy loads, or navigate mountainous terrain, this kit replaces worn factory components with a system engineered to handle extreme thermal stress. The bolt-on installation requires no vehicle modifications and includes everything needed for a professional service.

This kit features Z36 Carbon-Fiber Ceramic brake pads, which provide superior stopping power without the high dust levels typical of metallic pads. These are paired with drilled and slotted rotors that maximize heat dissipation during long descents and keep the braking surface clear of debris. To ensure long-term durability and resistance to road salt and moisture, the included calipers are finished in a high-temperature red powder coating.

• Carbon-Fiber Ceramic Z36 pads offer severe-duty performance with low-dust operation.
• Drilled and slotted rotors maintain cooler temperatures and provide consistent pedal feel.
• Red powder-coated calipers offer superior corrosion resistance and a distinct aesthetic.
• Zinc-plated rotors provide an extra layer of protection against rust and oxidation.
• Includes stainless steel installation hardware, shims, and high-temperature ceramic lubricant.
• MPN: KC6259-36

Fits 2014-2022 Nissan Rogue and Rogue Sport (S, SL, SV).

The Power Stop KOE7035 Z17 Evolution Plus brake kit is a complete stock replacement solution designed to restore original braking performance. This front and rear kit replaces worn OE components with ceramic pads and mill-balanced rotors, providing a direct bolt-on upgrade for daily drivers without modifying the factory braking system.

• Z17 Evolution Plus ceramic brake pads feature a low-dust formula validated through third-party on-vehicle testing for clean, reliable stopping power.
• Autospecialty non-coated replacement rotors are mill-balanced to ensure smooth operation and eliminate vibration.
• Multi-layer rubberized shims isolate noise for virtually silent braking under diverse driving conditions.
• Includes a complete set of stainless-steel installation hardware and high-temperature ceramic lubricant for a professional-grade installation.

• MPN: KOE7035
• Position: Front & Rear
• Kit Series: Z17 Evolution Plus / Autospecialty
• Pad Material: Ceramic
• Rotor Finish: Non-Coated (Mill-Balanced)
• Includes: Rotors, Brake Pads, Hardware, Lubricant

Fits 2020-2021 Chevrolet Silverado 3500 HD (High Country, LT, LTZ, WT).

The Power Stop Z36 Truck & Tow Brake Kit (KC8670B-36) is engineered for heavy-duty applications where standard brakes struggle. Whether you are towing a trailer through mountain passes or hauling heavy loads to a jobsite, this complete front-end bolt-on upgrade provides the increased thermal capacity and stopping power required for severe-duty use.

This kit features Z36 Carbon-Fiber Ceramic brake pads, formulated to handle the added weight of towing without the high dust levels typical of metallic pads. These are paired with precision drilled and slotted rotors that maximize airflow to dissipate heat and prevent brake fade during long descents. The included calipers are treated with a high-temperature red powder coating to resist corrosion and maintain a clean appearance behind the wheels.

• Z36 Carbon-Fiber Ceramic Pads: Severe-duty friction compound providing 30% less dust than OE pads based on 3rd party testing.
• Drilled & Slotted Rotors: Maximizes cooling and gas evacuation; zinc-plated for long-term rust protection.
• Red Powder-Coated Calipers: Remanufactured and treated with high-temp powder coating for superior corrosion resistance.
• Premium Hardware: Includes stainless steel pad shims, installation hardware, and high-temperature ceramic lubricant.
• Bolt-On Installation: Direct fit for factory mounting points with no modifications required.
• Complete Kit: Includes two front rotors, two calipers, pads, and two front sensor wires.

Fits select 2010-2018 Subaru Forester, Impreza WRX, Legacy, Outback, XV Crosstrek, and Crosstrek. This Power Stop Z23 Evolution Sport brake kit replaces worn factory front braking components with a high-performance system designed for daily drivers. The KC6082 kit is a complete bolt-on solution that improves stopping power without requiring vehicle modifications.

The system features Z23 Carbon-Fiber Ceramic pads, which provide a higher friction coefficient than standard ceramic while maintaining a low-dust, noise-free profile verified by third-party testing. These are paired with drilled and slotted rotors that maximize cooling and gas evacuation during heavy use. The included red powder-coated calipers are remanufactured in Chicago, IL, and treated with a high-temperature coating to resist corrosion and road debris.

• Carbon-Fiber Ceramic Pads: Z23 compound reduces dust by approximately 30% compared to OE.
• Drilled & Slotted Rotors: Precision-machined for maximum heat dissipation and zinc-plated for rust protection.
• Red Powder-Coated Calipers: Durable finish provides long-lasting corrosion resistance and a performance aesthetic.
• Premium Hardware: Includes stainless steel installation clips and high-temperature ceramic lubricant.
• Quiet Braking: Multi-layer rubberized shims dampen vibration to eliminate brake squeal.
• Manufacturer Part Number: KC6082

Fits 2005-2006 Honda CR-V (EX, LX, SE).

The Power Stop KOE6173 Autospecialty Z17 Stock Replacement Brake Kit provides a complete, bolt-on solution to restore the braking performance and reliability of your daily driver. This comprehensive kit replaces worn factory components with Z17 Evolution Plus ceramic brake pads and precision-engineered Autospecialty rotors, ensuring a quiet, low-dust ride that meets original equipment standards.

• Z17 Evolution Plus Ceramic Pads: Formulated for low-dust operation and validated through 3rd-party on-vehicle testing in heavy city traffic.
• OE-Style Rotors: Non-coated replacement rotors are mill-balanced to eliminate vibration and ensure smooth pedal feel.
• Noise Reduction: Multi-layer rubberized shims provide effective thermal insulation and noise damping for virtually silent braking.
• Installation Hardware: Includes application-specific stainless-steel hardware and high-temperature ceramic brake lubricant for a professional-grade install.
• Complete Kit: Includes front and rear rotors and matching pad sets for a full axle service.

Fits 2010-2023 Lexus GX460 and 2010-2024 Toyota 4Runner models.

The Power Stop Z17 Autospecialty Stock Replacement Brake Kit provides a complete, bolt-on solution for daily drivers looking to restore original equipment braking performance. Designed as a direct alternative to performance upgrades, this comprehensive kit replaces worn factory components with mill-balanced rotors and low-dust ceramic pads to ensure smooth, quiet, and reliable stopping power.

This kit features Z17 Evolution Plus ceramic brake pads, which utilize a low-dust formula validated through independent 3rd party testing in rigorous city traffic conditions. The included Autospecialty rotors are precision-machined to OE specifications and mill-balanced to eliminate vibration. To ensure a professional-grade installation, every kit includes stainless-steel hardware and high-temperature ceramic lubricant.

• Complete front and rear axle solution (MPN: KOE5874)
• Z17 Evolution Plus ceramic pads for low-dust, noise-free operation
• Multi-layer rubberized shims effectively dampen braking noise
• Non-coated replacement rotors mill-balanced for a smooth ride
• Includes stainless-steel installation hardware and ceramic brake lubricant
• Direct bolt-on fitment requires no vehicle modifications

Fits 2014-2019 Infiniti Q70 and Q70L (3.7L, 5.6L, and Hybrid).

The Power Stop KC8061 Z23 Evolution Sport Brake Kit provides a comprehensive front and rear performance upgrade for your daily-driven Infiniti. This all-in-one package replaces your worn factory components with a matched set of high-friction pads, drilled and slotted rotors, and refurbished calipers. Designed as a direct bolt-on replacement, this kit installs into factory mounting points with no modifications required, offering a significant improvement in thermal management and pedal feel.

• Carbon-Fiber Ceramic Pads: The Z23 compound offers increased bite and low-dust operation, validated by third-party testing to produce 30% less dust than OE pads.
• Performance Rotors: Drilled and slotted design facilitates rapid heat dissipation and gas venting while maintaining a clean pad surface.
• Corrosion Protection: Rotors are finished in silver zinc plating to prevent rust, while calipers feature a high-temperature red powder coating for long-term durability.
• Quiet Operation: Multi-layer rubberized shims act as a thermal and acoustic barrier to minimize brake squeal.
• Complete Hardware Kit: Includes premium stainless steel installation hardware and high-temperature ceramic brake lubricant.
• Manufacturer Part Number: KC8061

Fits 2011 Honda Accord EX and EX-L models.

The Power Stop Z23 Evolution Sport Brake Upgrade Kit (KC5935) provides a complete, bolt-on solution to replace worn factory braking components with performance-engineered hardware. This front and rear kit is designed specifically for daily-driven 2011 Honda Accords, offering increased stopping power and better thermal management through high-performance materials. The kit features Z23 carbon-fiber ceramic pads, providing a low-dust, noise-free braking experience with validated performance against original equipment.

To ensure long-term reliability and consistent bite, the included rotors are precision-drilled and slotted to evacuate gases and maintain cooler operating temperatures. These rotors are finished with silver zinc plating to defend against rust and corrosion. The package also features remanufactured calipers treated with a high-temperature red powder coating, offering both aesthetic appeal and a durable barrier against the elements.

• Z23 carbon-fiber ceramic compound significantly enhances bite and thermal stability
• On-vehicle testing shows 30% less dust on average compared to OE pads
• Drilled and slotted performance rotors provide maximum cooling and gas evacuation
• Silver zinc plating provides maximum protection against corrosion
• Red powder-coated calipers offer a high-temperature finish that resists weather and debris
• Multi-layer rubberized shims ensure virtually noise-free operation
• Includes premium stainless steel hardware and high-temperature ceramic lubricant
• Manufacturer Part Number: KC5935

Fits 2008-2010 Honda Accord LX, LX-P, and LX-S models.

The Power Stop Z23 Evolution Sport Brake Upgrade Kit (KC2744) provides a complete bolt-on solution to replace worn factory components with performance-oriented hardware. This comprehensive kit includes everything needed for a full front and rear installation, including red powder-coated calipers, carbon-fiber ceramic pads, and silver zinc-plated rotors. Engineered for the demands of daily driving, the Z23 compound offers increased thermal stability and significantly improved bite compared to standard ceramic pads.

• Carbon-Fiber Ceramic Z23 compound provides high-performance braking with 30% less dust than OE pads based on 3rd-party testing.
• Drilled and slotted rotors maximize cooling and sweep away gas and debris for consistent contact.
• Silver zinc plating on rotors protects against rust and corrosion in harsh environments.
• Red powder-coated calipers offer superior corrosion resistance and a custom appearance.
• Multi-layer rubberized shims effectively dampen vibrations for virtually noise-free operation.
• Includes premium stainless steel installation hardware and high-temperature ceramic brake lubricant.
• Manufacturer Part Number: KC2744

Fits 2010-2014 Toyota FJ Cruiser Base.

The Power Stop Z36 Truck & Tow Brake Upgrade Kit with Powder Coated Calipers is engineered specifically for vehicles that face the added stress of towing, hauling, or navigating steep mountain grades. This comprehensive front and rear kit replaces your factory components with a severe-duty system designed to manage high thermal loads without the brake fade common in OE setups. The Z36 carbon-fiber ceramic brake pads provide significantly more stopping power than standard ceramic compounds while maintaining low-dust performance, validated through 3rd party testing to produce 30% less dust on average than original equipment.

Every component in this kit is built for durability and ease of installation. The drilled and slotted rotors maximize heat dissipation and sweep away gas and debris to keep the pad surface clean during long descents. For protection against the elements, the rotors are zinc plated to resist corrosion, while the red powder-coated calipers offer a high-temperature finish that withstands harsh driving conditions. This is a complete, bolt-on solution that requires no modifications to your factory braking system.

• Z36 Carbon-Fiber Ceramic Pads: Reinforced compound for superior braking performance under heavy loads.
• Drilled & Slotted Rotors: Precision-drilled holes and rounded slots for maximum cooling and debris removal.
• Red Powder Coated Calipers: High-temp finish provides a durable barrier against rust and corrosion.
• Zinc Plating: Silver zinc dichromate plating on rotors for long-lasting oxidation resistance.
• Premium Hardware: Includes stainless steel installation hardware, shims, and high-temperature ceramic lubricant.
• MPN: KC5805-36

Fits 1997-2001 Honda Prelude Base and Type SH.

The Power Stop Z23 Evolution Sport Brake Upgrade Kit (KC706) is a comprehensive solution for Honda Prelude owners looking to replace worn factory components with a performance-oriented, bolt-on system. This complete front and rear kit is engineered to enhance thermal management and stopping power for daily drivers without the noise or excessive dust associated with track pads.

The system features Z23 Carbon-Fiber Ceramic pads, which utilize a high-performance compound that provides a significant increase in braking torque over standard ceramic pads. These are paired with drilled and slotted rotors that effectively sweep away gas and debris while maintaining lower operating temperatures. Each rotor is finished in silver zinc plating to protect against rust and corrosion behind the wheels.

• Z23 Carbon-Fiber Ceramic Pads: Low-dust formula validated by third-party testing to produce 30% less dust than OE pads.
• Drilled & Slotted Rotors: Precision-drilled for maximum cooling and slotted to maintain a clean contact patch.
• Red Powder Coated Calipers: Remanufactured with a high-temperature coating for lasting corrosion resistance and a bold aesthetic.
• Noise-Free Performance: Equipped with multi-layer rubberized shims to isolate vibration and eliminate brake squeal.
• Installation Ready: Includes premium stainless-steel hardware and high-temperature ceramic brake lubricant.
• Manufacturer Part Number: KC706

Fits select 2011-2017 Infiniti M35h, M37, M56, Q70, and Q70L (3.7L, 5.6L, and Hybrid models).

The Power Stop Z23 Evolution Sport Brake Upgrade Kit with Powder Coated Calipers (KC6237) is a comprehensive solution for drivers looking to enhance the braking performance of their daily-driven Infiniti. This complete front and rear set replaces worn factory components with high-performance hardware designed for increased stopping power without compromising street drivability. The kit features Z23 Carbon-Fiber Ceramic brake pads, which offer a low-dust formula validated through third-party testing to produce 30% less dust on average compared to original equipment.

Engineered for thermal efficiency, the included rotors are precision-drilled for maximum cooling and slotted to sweep away gas and debris, maintaining a clean contact patch. Each rotor is finished with silver zinc plating to prevent rust and corrosion. The kit is rounded out with remanufactured calipers finished in a durable high-temperature red powder coating, providing both a custom look and long-term protection against the elements. This bolt-on upgrade requires no modifications and installs directly to factory mounting points.

• Manufacturer Part Number: KC6237
• Z23 Carbon-Fiber Ceramic Pads: Significant performance upgrade over traditional ceramic for better bite.
• Drilled & Slotted Rotors: Precision-machined and zinc-plated for heat dissipation and corrosion resistance.
• Red Powder Coated Calipers: High-temp finish protects against road salt and moisture while adding custom style.
• Noise-Free Braking: Multi-layer rubberized shims dampen vibration to eliminate brake squeal.
• Installation Ready: Includes front and rear rotors, pads, calipers, stainless steel hardware, and high-temperature ceramic lubricant.

Fits 2008-2010 Honda Accord (EX, EX-L, LX, LX-P, LX-S) and 2009-2010 Acura TSX (Base, V6).

The Power Stop Z23 Evolution Sport Brake Upgrade Kit (KC3127) provides a complete rear axle solution for drivers looking to improve stopping power and reduce dust. This kit replaces factory hardware with performance-engineered components, including Z23 Carbon-Fiber Ceramic pads and G3000 metallurgy rotors. The carbon-fiber reinforced ceramic compound offers significantly higher friction than standard ceramic pads while remaining nearly dust-free, validated through 3rd-party testing to produce 30% less dust than OE equipment.

To ensure consistent performance under load, the rotors are precision drilled for maximum cooling and slotted to clear gas and brake debris. Every rotor is finished with silver zinc plating to defend against rust and corrosion behind the wheels. The included calipers are treated with a high-temperature red powder coating, providing a durable, enthusiast-grade look while protecting the casting from road salt and debris. This kit is a direct bolt-on upgrade that installs with no modifications required.

• Carbon-Fiber Ceramic Z23 pads provide increased braking bite without excessive dust
• Drilled and slotted rotors ensure rapid heat dissipation and a clean friction surface
• High-temp red powder-coated calipers resist corrosion and enhance aesthetics
• Silver zinc plating protects rotors from rust for long-lasting performance
• Multi-layer rubberized shims offer virtually noise-free operation
• Includes premium stainless-steel hardware and high-temperature ceramic lubricant
• Designed as a direct replacement for stock rear brake systems
• Manufacturer Part Number: KC3127

Fits select 2007-2021 Chrysler Aspen, Dodge Durango, Ram 1500, and Ram 1500 Classic. The Power Stop Z36 Truck & Tow Brake Upgrade Kit with Powder Coated Calipers provides the additional stopping power required for vehicles that haul trailers, carry heavy loads, or navigate mountainous terrain. This complete kit replaces the factory front and rear braking system with severe-duty components designed to manage increased thermal loads without the brake fade common to standard replacement parts.

• Carbon-Fiber Ceramic Pads: Z36 proprietary compound provides high-torque stopping power while maintaining low-dust performance, validated at 30% less dust than OE pads.
• Drilled & Slotted Rotors: Precision-machined rotors maximize heat dissipation and gas venting to keep temperatures down during long descents and heavy towing.
• Protective Finishes: Rotors are zinc-plated for rust resistance, while the included calipers feature a high-temp red powder coating for long-term corrosion protection.
• Complete Hardware Kit: Includes premium stainless-steel shims, installation hardware, and high-temperature ceramic brake lubricant for a silent, professional-grade installation.

• MPN: KC2164A-36
• Position: Front & Rear
• Rotor Style: Drilled and Slotted
• Rotor Finish: Silver Zinc Plating
• Caliper Finish: Red Powder Coat
• Pad Material: Carbon-Fiber Reinforced Ceramic

Fits select 2011-2014 Acura TSX and 2011-2012 Honda Accord (Base, Special Edition, V6, EX, EX-L, LX, LX-P, LX-S, and SE models).

The Power Stop Z23 Evolution Sport Brake Upgrade Kit with Powder Coated Calipers is a comprehensive rear brake solution designed to replace worn factory components with performance-oriented hardware. This bolt-on kit provides a matched system of carbon-fiber ceramic pads, cross-drilled and slotted rotors, and fully remanufactured calipers finished in a high-temperature red powder coating to resist corrosion and maintain a clean appearance behind your wheels.

• Z23 Carbon-Fiber Ceramic Pads: Formulated for increased thermal stability and approximately 30% less dust than original equipment, ensuring cleaner wheels and consistent stopping power.
• Drilled and Slotted Rotors: Engineered to maximize cooling and sweep away gas and debris; zinc plated for superior rust protection.
• Red Powder Coated Calipers: Remanufactured in Chicago, IL, and coated in a durable, high-temp finish that stands up to environmental abuse.
• Noise-Free Performance: Equipped with multi-layer rubberized shims to dampen vibrations and eliminate brake squeal.
• Complete Installation Kit: Includes premium stainless steel hardware and high-temperature ceramic brake lubricant for a professional-grade install.
• Manufacturer Part Number: KC5368