Fits select 2024-2026 Toyota Tacoma models including SR, SR5, TRD Sport, TRD Off-Road, TRD PreRunner, TRD Pro, Trailhunter, and Limited.

Rally Armor UR (urethane) mud flaps are engineered to provide maximum debris protection for your fourth-generation Tacoma. Unlike traditional vinyl or rubber flaps that can stiffen or curl over time, these flexible polyurethane flaps are designed to maintain their form through extreme temperature fluctuations. The UV-resistant and abrasion-resistant material protects your vehicle's finish from salt, spray, gravel, and grime in both high-heat and freezing environments.

Installation is straightforward and requires no drilling, utilizing the vehicle's existing mounting points for a secure fit. Each set provides comprehensive four-corner protection with a black finish accented by a red Rally Armor logo.

• Manufacturer Part Number: MF114-UR-BLK-RD
• Material: High-grade flexible polyurethane (UR)
• Color/Finish: Black with Red Logo
• Installation: Bolt-on design; no drilling required
• Resistant to UV degradation and chemical abrasion
• Engineered for extreme hot and cold weather performance
• Includes all necessary hardware and four mud flaps

Fits 2021-2024 Ford Bronco 4-Door models.

The factory rear lower control arm mounts on the Ford Bronco are often the first point of contact when navigating rocky terrain. These Turn Offroad Rear Lower Link Skid Plates are engineered to shield those vulnerable mounting points and pivot joints from heavy impact and abrasion. By providing a smooth, angled surface, these plates allow your vehicle to slide over obstacles rather than hanging up on the factory bracketry.

Designed specifically for the 4-door chassis, these skid plates reinforce the suspension mounting area while maintaining essential ground clearance. They are a critical upgrade for owners looking to protect their drivetrain and suspension components during technical trail rides or rock crawling.

• Shields rear lower link frame-side mounts from direct rock damage
• Provides a smooth profile to prevent hanging up on trail obstacles
• Precision fitment specifically for the 4-door Bronco chassis
• Direct bolt-on installation using factory mounting points
• Manufacturer Part Number: SUSK-M4

Fits 2021+ Ford Bronco models.

The Turn Offroad Billet Upper Control Arm Kit (SUCA-M1) is an essential upgrade for 2021+ Bronco owners looking to improve front suspension strength and geometry. When installing a suspension lift or leveling kit, factory stamped-steel arms often limit travel and create unfavorable ball joint angles. These CNC-machined billet aluminum arms provide the durability and clearance needed for off-road performance and larger tire setups.

Engineered for precision and strength, these control arms restore alignment adjustability and ensure your suspension operates smoothly through its full range of motion. The bolt-on design allows for a direct replacement of the original equipment, offering a much more robust solution for demanding trail conditions.

• Precision CNC-machined from high-grade billet aluminum
• Specifically engineered for 2021+ Ford Bronco suspension geometry
• Corrected ball joint angles for lifted or leveled applications
• Direct bolt-on replacement for factory upper control arms
• Enhances durability and clearance for oversized tires
• Includes all necessary installation hardware
• Manufacturer Part Number: SUCA-M1

Fits 2015-2024 Ford F-150 models (excluding 2.7L engines).

Protect your vehicle's most vulnerable underbody components with the RIVAL Aluminum Engine Skid Plate. Designed specifically for the Ford F-150, this skid plate provides a durable barrier against rocks, debris, and trail obstacles that can cause costly damage to the engine oil pan and lower chassis components.

• Fabricated from high-strength aluminum for a balance of weight savings and impact resistance.
• Engineered for a precise, direct fit on the 2015-Present Ford F-150 chassis.
• Corrosion-resistant material ensures long-term durability in harsh off-road environments.
• Designed to mount securely to the vehicle frame to shield vital engine internals.
• Manufacturer Part Number: 2333.1856.2.6

Protect your vehicle's exterior from road debris, gravel, and mud with this pair of Sparco Red Mud Flaps. Designed for universal application, these flaps provide a functional rally-inspired look while shielding your paintwork and wheel wells from impact damage during spirited driving or off-road conditions.

Constructed from durable, high-density polyethylene, these mud flaps are engineered to withstand harsh weather and constant road spray. These are a universal fitment component, offering the flexibility to be trimmed or mounted to suit various vehicle profiles and mounting points.

• Manufacturer Part Number: 03791RS
• Quantity: One Pair (2 flaps)
• Color: Red with white Sparco logo
• Construction: Durable polyethylene material
• Fitment: Universal application (requires drilling/hardware for installation)

Defend your vehicle's bodywork and paint from stones, mud, and road debris with the Sparco Mud Flap Pair. These rally-inspired flaps provide a durable barrier for the wheel wells, helping to prevent impact damage and surface corrosion during both daily driving and spirited use.

• Manufacturer Part Number: 03791NR
• Quantity: Pair (2 pieces)
• Durable, flexible construction designed for harsh road conditions
• Color: Black with iconic white Sparco logo
• Provides essential protection for rocker panels and exterior finishes

Shield your vehicle’s bodywork and undercarriage from road debris with the Sparco Blue Mud Flap Pair. Engineered for durability, these flaps provide essential protection against gravel, mud, and spray while adding a distinct rally-inspired aesthetic to your build. Their robust construction is designed to withstand harsh road conditions, helping to prevent rock chips and maintain the integrity of your exterior paint.

• Provides reliable protection for paint and exterior body panels
• Vibrant blue finish featuring the iconic white Sparco logo
• Universal design suitable for custom trimming and mounting applications
• Engineered to endure impact and varied weather conditions
• Sold as a set of two (pair)
• Manufacturer Part Number: 03791AZ

Protect your vehicle's paint and underbody from road debris, mud, and gravel with this pair of Sparco Universal Mud Flaps. Designed for durability and styled with a professional rally aesthetic, these flaps are a functional addition for enthusiasts looking to safeguard their exterior during spirited driving or off-road excursions. The universal design provides a versatile starting point for custom fitment on a wide range of vehicle platforms.

• Universal Application: Designed to be adapted to various makes and models.
• Durable Construction: Built to withstand impacts from stones and road grime.
• Complete Set: Sold as a pair (2 pieces) for front or rear installation.
• Classic Aesthetic: Clean white finish featuring the iconic Sparco branding.
• Manufacturer Part Number: 03791

Fits 2004-2012 Chevrolet Colorado and GMC Canyon models. This Rust Buster center frame repair section is engineered to address the common issue of frame rot and structural compromise in the mid-section of the chassis on the passenger side.

Designed as a precision-cut replacement, this section allows for the restoration of the truck's structural integrity without requiring a full chassis replacement. Each piece is CAD-designed to ensure accurate fitment over the factory frame rails, providing a clean surface for a permanent, weld-on installation. This repair solution is vital for maintaining vehicle safety and roadworthiness in regions where road salt and moisture accelerate chassis corrosion.

• Specific fitment for 2004-2012 Colorado and Canyon chassis
• Designed for the passenger side (right) center frame section
• Heavy-duty steel construction ensures long-term durability
• Precision-engineered for a secure weld-on installation
• Manufacturer Part Number: RB7504R

Fits 2007-2013 Chevrolet Silverado and GMC Sierra 1500 models.

The Rust Buster RB7336L Rear Mid Frame Repair Kit is engineered to restore the structural integrity of your truck's chassis where road salt, debris, and moisture typically cause severe oxidation. This weld-in solution allows you to replace the corroded factory driver-side frame section without the expense of a complete frame replacement. Precision-formed to match the original frame contours, it ensures a proper fit for critical suspension and body mounting points.

• Positions on the left (driver) side rear mid-frame section
• CNC laser cut and brake-formed for precise fitment
• High-strength steel construction for long-term durability
• Designed for weld-in installation by a qualified technician
• Manufacturer Part Number: RB7336L

Fits 1995-2004 Toyota Tacoma.

The Rust Buster Frameworks Mid Rear Over-Axle Frame Repair Kit is designed to address the common corrosion issues found on first-generation Tacoma frames. This repair section targets the critical area directly above the rear axle on the passenger side, where road debris and moisture frequently cause structural rot. By using this heavy-duty steel replacement section, you can restore the integrity of the vehicle's chassis without the expense of a complete frame swap.

• Specifically engineered for the mid-rear over-axle frame section
• Fits Right (Passenger) side only
• Durable steel construction for long-lasting structural repair
• Designed for weld-on installation over or in place of damaged factory rails
• Manufacturer Part Number: RB7108R

Fits 2007-2025 Jeep Wrangler (JK/JL) and 2020-2025 Jeep Gladiator models equipped with a standard 2-inch receiver hitch.

The Rugged Ridge Hitch Skid Plate is engineered to protect your vehicle's rear receiver and undercarriage from severe off-road impacts. During trail navigation, a low-hanging hitch can become an anchor point or take a direct strike on rock ledges. This skid plate is constructed from heavy-duty 1/4-inch steel plate to absorb those forces, preventing damage to your hitch assembly and frame.

Beyond its protective role, this unit features an integrated step that provides convenient access to your truck bed, roof racks, or cargo area. The assembly is finished in a durable, lightly textured black powder coat for superior corrosion resistance and a clean, rugged appearance that matches factory trim.

• Material: 1/4-inch thick steel plate construction
• Finish: Lightly textured black powder coat
• Compatibility: Fits any standard 2-inch receiver hitch
• Functional Step: Provides easier access to rear cargo and roof-mounted racks
• Manufacturer Part Number: 18013.01
• Warranty: Limited 5-year warranty

Fits 2018-2025 Jeep Wrangler (JL) and Gladiator (JT) models across various trims including Rubicon, Mojave, and Sport.

The Rugged Ridge Front Bumper Skid Plate is engineered to protect critical front-end components from off-road hazards. Stamped from heavy-duty 4mm thick steel plate, this skid plate features a unified fold-and-weld construction designed to provide maximum defense for the factory crash bar and sensitive electronic sway bar disconnect components.

This skid plate is specifically designed to integrate with Rugged Ridge Arcus, Spartacus, and HD Series bumpers, providing a finished look while adding a layer of structural armor to your Jeep's underside.

• Material: 4mm thick stamped steel plate
• Construction: Unified fold-and-weld design
• Fitment: Designed for Rugged Ridge Arcus, Spartacus, and HD Series bumpers
• Protection: Shields factory crash bar and electronic sway bar disconnect
• Manufacturer Part Number: 18003.61

Fits select 2007-2018 Jeep Wrangler and Wrangler JK models including Rubicon, Sahara, Sport, and X trims.

Protect your critical steering components during off-road excursions with the Rugged Ridge Front Skid Plate. This overbuilt armor is engineered to shield the steering assembly and the expensive electric sway bar disconnect system found on Rubicon models from trail obstacles. The frame-mount design incorporates specialized gussets and welded brackets to ensure maximum durability and rigid performance in demanding environments.

• Construction: Durable 3/16-inch steel plate
• Finish: Rust-resistant E-coating with a black powder-coated top coat
• Compatibility: Fits factory front bumpers and all Rugged Ridge front bumpers (including XHD systems)
• Contents: 4-piece kit with necessary hardware
• Installation: Frame-mount design; grinding, drilling, or cutting may be required
• Manufacturer Part Number: 18003.30

Note: This skid plate will not work with cam bolts found in some aftermarket lift kits.

Fits select 1966-2018 Jeep Wrangler, Cherokee, Grand Cherokee, CJ, Liberty, Comanche, and J-Series models with Dana 30 front axles.

Protect your factory differential cover from trail damage and impact with the Rugged Ridge Differential Skid Plate. Engineered to follow the specific contours of the stock Dana 30 housing, this heavy-duty shield provides a smooth surface that helps your vehicle slide over obstacles rather than getting hung up on the differential. It is constructed from 3/16-inch thick steel with a resilient black powder-coated finish for maximum durability and corrosion resistance.

As an Authentic Jeep Licensed product, this skid plate features the Jeep logo stamped directly into the face. The kit includes all necessary replacement mounting hardware and instructions for a secure installation using the factory differential mounting points.

• Manufacturer Part Number: 16597.30
• Material: 3/16-inch heavy-duty steel
• Finish: Durable black powder coat
• Axle Application: Dana 30
• Fitment: Designed for use with factory differential covers
• Authentic Jeep Licensed Product with stamped logo
• Includes replacement mounting hardware and instructions

Fits 2007-2018 Jeep Wrangler and Wrangler JK (Rubicon, Sahara, Sport, Unlimited, and X models).

Protect your Jeep's factory paint from trail rash, pinstriping, and debris with the Rugged Ridge Magnetic Protection Panel kit. This 9-piece armor system is designed for off-roaders who want to preserve their vehicle's finish during weekend excursions without the commitment of permanent film or paint. Each panel is easily removable, allowing you to quickly prep for the trail and return to a clean street look in minutes.

Constructed from heavy-duty 16-gauge (.060 inch) magnetic sheet material, these panels provide a tough barrier against brush and stones. The durable matte black vinyl finish provides a rugged aesthetic while shielding the body panels most prone to impact. Each piece is precision-cut to follow the JK body lines for a professional, secure fit that stays in place even in demanding terrain.

• Complete 9-piece kit for comprehensive body coverage
• Heavy-duty 16-gauge (.060") thick magnetic sheet construction
• Durable matte black vinyl finish protects against scratches and UV
• Easily removable and reusable for trail-ready protection
• Manufacturer Part Number: 12300.52
• Backed by a 5-year limited warranty

Fits select 2007-2018 Jeep Wrangler and Wrangler JK models including Sport, Sahara, and Rubicon.

Protect your Jeep from the common "cowl dent" with Rugged Ridge Cowl Body Armor. When door limiter straps are disconnected for door removal, the side mirrors can easily over-extend and impact the cowl, causing unsightly damage. These covers provide a durable physical barrier that shields this vulnerable area while adding a rugged accent to your exterior trim.

Constructed from high-strength, UV-treated black thermoplastic, these armor plates are designed to resist fading and weathering. Installation is straightforward and requires no drilling or hardware; the pieces attach securely using pre-applied 3M automotive-grade double-sided adhesive for a flush, permanent fit.

• Prevents cowl damage from mirror impact during door removal
• Molded from UV-resistant black thermoplastic for long-term durability
• Simple peel-and-stick installation with 3M automotive-grade tape
• Sold as a complete pair (Driver and Passenger sides)
• Manufacturer Part Number: 11651.18

Fits 2007-2018 Jeep Wrangler and Wrangler JK models including Rubicon, Sahara, Sport, and Unlimited (2-door and 4-door).

Protect your Jeep’s hood from trail debris, stone chips, and road grime with the Rugged Ridge Body Armor Hood Guard. This guard is precision-engineered from durable, UV-treated thermoplastic featuring a classic black diamond plate texture. It provides an immediate styling upgrade while shielding your factory paint from impact damage. Beyond protection, it serves as a practical solution for covering existing hood scratches or minor dents to prevent further corrosion.

• Constructed from heavy-duty UV-treated thermoplastic for long-term durability
• Rugged black diamond plate finish for an aggressive off-road look
• Mounts securely using automotive-grade 3M double-sided adhesive tape
• Installation may require minor drilling under the hood for maximum security
• Replaces or covers damaged paint sections on the leading edge of the hood
• Manufacturer Part Number: 11651.17
• Limited 5-year warranty

Protect your Jeep's upper body tub rails from the constant wear and tear of top removal and cargo loading with Rugged Ridge Body Tub Rail Armor. Fits select 1997-2006 Jeep Wrangler TJ models, including Sport, Sahara, Rubicon, and Unlimited models. These guards are specifically designed to shield the high-contact top rail area which is frequently subjected to chips and scratches during soft top or hardtop swaps.

Constructed from rugged, UV-treated thermoplastic, this rail armor is built to withstand sun exposure and harsh weather without fading or warping. The textured finish provides a clean look while effectively concealing existing cosmetic damage. Installation is straightforward and requires no drilling, utilizing pre-applied automotive-grade double-sided adhesive tape for a secure bond to the factory body panels.

• Fits 1997-2006 Jeep Wrangler TJ (all submodels including Unlimited)
• Manufactured from durable UV-treated thermoplastic
• Protects body tub top rails from damage during cargo loading and top changes
• Easy no-drill installation with automotive-grade adhesive tape
• Covers existing chips and scratches for a refreshed appearance
• Manufacturer Part Number: 11650.41
• Limited 5-Year Warranty

Fits 1997-2006 Jeep Wrangler TJ and Unlimited submodels, including SE, Sport, Sahara, X, Rubicon, and 65th Anniversary Edition.

The Rugged Ridge Body Tub Rail Body Armor provides critical protection for the exposed upper edges of your Jeep's tub. These rails are prone to chips, scratches, and impact damage during the installation or removal of hard and soft tops, as well as when loading cargo or passengers. This armor set offers a clean, finished look while shielding the factory paint from abrasion.

• Manufactured from durable, UV-treated thermoplastic to resist fading and weathering
• Protects the top of the tub rails from damage caused by top hardware and cargo
• Quick, no-drill installation using automotive-grade double-sided adhesive tape
• Can be used to conceal existing cosmetic damage and scratches
• Manufacturer Part Number: 11650.40
• Includes a Limited 5-Year Warranty

Fits 1997-2006 Jeep Wrangler (SE, Sport, Sahara, Rubicon, X, 65th Anniversary Edition) and 2004-2006 Wrangler Unlimited LJ.

Protect your hood from trail debris and road grime with the Rugged Ridge Body Armor Hood Guard. Each piece is precision-molded from durable, UV-treated thermoplastic featuring a black diamond plate texture for a rugged off-road aesthetic. This component serves as both a protective barrier for fresh paint and an effective way to conceal existing scratches or minor dents on the hood lip.

Installation is straightforward using the included automotive-grade 3M double-sided adhesive tape for a secure bond to the factory bodywork. Note that the front guard may require minor under-hood drilling for a complete installation. This armor is designed to withstand the elements without fading or becoming brittle over time.

• Manufacturer Part Number: 11650.17
• Construction: UV-Treated Thermoplastic
• Finish: Black Diamond Plate
• Installation Method: Automotive-grade 3M adhesive tape (Under-hood drilling may be required)
• Warranty: Limited 5-Year Warranty

Fits 1997-2006 Jeep Wrangler TJ (SE, Sport, Sahara, Rubicon, X, and 65th Anniversary Edition).

Rugged Ridge Body Armor Rocker Side Panels provide a durable barrier against trail debris while refreshing your Jeep's exterior profile. These panels are specifically engineered to cover typical scratch and dent areas on the rocker panels, making them an ideal solution for concealing existing trail damage or preventing new wear. Each piece is constructed from UV-treated thermoplastic featuring a classic black diamond plate texture that resists fading and maintains its finish under prolonged sun exposure.

Installation is straightforward using the included ultra-strong 3M automotive-grade double-sided tape for a secure, drill-free bond to the body (note: some front guard components may require minor under-hood drilling). For vehicles with existing paint chips, applying touch-up paint before installation helps prevent corrosion while the armor provides a clean, renewed appearance.

• Constructed from UV-treated black diamond plate thermoplastic
• Protects rocker panels from trail debris and road grime
• Installs via high-strength 3M automotive-grade double-sided tape
• Effective solution for covering existing scratches and minor dents
• Manufacturer Part Number: 11650.05
• Limited 5-Year Warranty

Fits 2007-2018 Jeep Wrangler Unlimited and Wrangler JK Unlimited (4-Door).

The Rugged Ridge RRC Rocker Guards are engineered for serious rock crawling, providing essential side-body protection for your Jeep. This design features a specialized side hoop specifically positioned to block large trail outcroppings and obstacles, preventing damage to your door and rocker panels. Built for durability and ground clearance, these guards secure directly to the frame to ensure a stable, bounce-free installation.

By utilizing a no-drill frame-mounted design, these RRC rock sliders keep the mounting points above the bottom of the frame, preserving your vehicle's breakover angle. This bolt-on setup allows for straightforward installation using basic tools while providing a significantly more rigid mounting point than body-mounted alternatives.

• Specialized side hoop design for maximum obstacle deflection
• Heavy-duty frame-mounted construction for bounce-free performance
• High-clearance design keeps mounting points above the frame bottom
• Direct bolt-on installation with no drilling required
• Durable black finish for lasting corrosion resistance
• Manufacturer Part Number: 11504.22

Fits 2007-2018 Jeep Wrangler JK 4-Door models.

The Rock Slide Engineering Step-Slider Rocker Guards provide a high-strength, dual-purpose solution for Jeep owners who require both serious trail protection and easier cabin access. These units are designed to safeguard your vehicle's rocker panels from impact and debris while offering a stable step surface for passengers and drivers. Built to withstand the rigors of off-road use, they replace or supplement factory equipment with a more robust shielding system.

• Designed specifically for the 4-door Jeep Wrangler JK (2007-2018)
• Combines heavy-duty rocker panel protection with integrated step functionality
• Manufactured in the USA for superior build quality and fitment
• Durable construction to resist deflection during off-road obstacles
• Manufacturer Part Number: AX-SS-RG-JK4

Fits 2020-2022 Jeep Gladiator JT.

Protect your investment and your rocker panels with the Rock Slide Engineering Step-Slider Skid Plate. Specifically engineered to complement Rock Slide Engineering's Step-Slider system, this skid plate provides a secondary layer of armor to absorb impacts and allow your vehicle to slide over trail obstacles without damaging the step mechanism. This unit ensures the longevity of your off-road setup while maintaining a smooth surface for technical crawling.

• Specifically designed for 2020-2022 Jeep Gladiator JT Step-Sliders
• Provides critical protection for the step housing and internal components
• Allows for a smoother sliding surface over rocks and debris
• Proudly made in the USA
• Manufacturer Part Number: AX-SP-300-JT4

Fits 2018-2022 Jeep Wrangler JL 4-Door.

The Rock Slide Engineering Step-Slider Skid Plate (AX-SP-300-JL4) is an essential upgrade for off-roaders looking to maximize the lifespan of their Step-Sliders. Designed specifically for the 4-door Jeep JL, this skid plate provides a sacrificial layer of armor that shields the main slider body and internal step mechanism from direct contact with rocks, stumps, and trail obstacles. This ensures your deployable steps continue to function smoothly even after demanding technical crawls.

• Direct fit for Rock Slide Engineering Step-Sliders
• Heavy-duty construction for superior underside protection
• Designed to slide over obstacles while preventing hang-ups
• Made in the USA
• Manufacturer Part Number: AX-SP-300-JL4

Fits 2007-2018 Jeep Wrangler JK 4-Door models.

The Rock Slide Step-Slider Skid Plate (AX-SP-300-JK4) adds a critical layer of armor to your vehicle's Step-Slider system. Specifically engineered for the 4-door Wrangler JK, this skid plate shields the internal step mechanism from direct rock impacts and trail debris, ensuring smooth operation even after heavy off-road use. Its high-clearance design maintains your vehicle's breakover angle while providing the rugged durability needed for technical terrain.

• Designed specifically for Rock Slide Step-Sliders on JK 4-Door models
• Protects the step mechanism and slider housing from rock damage
• Constructed for maximum durability in harsh off-road environments
• Proudly Made in the USA
• Manufacturer Part Number: AX-SP-300-JK4

Fits 2021-2022 Ford Bronco 4-Door models equipped with Rock Slide Engineering Step-Sliders.

Protect your investment and maintain the functionality of your motorized steps with these Rock Slide Engineering Step-Slider Skid Plates. Designed specifically for the off-road enthusiast, these skid plates provide a sacrificial layer of armor that shields the Step-Slider body and internal mechanisms from direct contact with rocks, stumps, and trail debris. This prevents the primary slider housing from sustaining structural damage or hanging up on obstacles during technical crawls.

• Specifically engineered for 2021-2022 Ford Bronco 4-Door Step-Slider systems
• Shields the step mechanism and main housing from heavy impact and abrasion
• Essential for maintaining smooth step operation after rigorous trail use
• Proudly Made in the USA
• Manufacturer Part Number: AX-SP-300-BR4

Fits 2024-2026 Toyota Land Cruiser, 2024-2026 Lexus GX550, and 2025-2026 Toyota 4Runner.

Protect your vehicle's front suspension from trail obstacles with Rival Lower Control Arm Skid Plates. Designed to safeguard the vulnerable lower control arms from impacts with rocks, stumps, and debris, these plates are essential for maintaining the integrity of your factory suspension components during off-road use. By providing a smooth sliding surface, they help prevent the arms from catching on obstacles, ensuring better momentum and less risk of alignment-shifting damage.

• Shields front lower control arms from direct impact and trail debris
• Contoured design maintains maximum ground clearance
• Includes all required mounting hardware for a secure installation
• Designed for the 2024-2026 Land Cruiser/GX550 and 2025-2026 4Runner platform
• Manufacturer Part Number: 2333.9574.2.6

Fits 2010-2024 Toyota 4Runner and 2010-2023 Lexus GX460 across all submodels.

Protect your vehicle's vital engine components and oil pan from trail damage with the Rival premium engine skid plate. Manufactured from 1/4-inch (6mm) deep-stamped aluminum alloy, this plate provides high-strength impact protection while remaining significantly lighter than traditional steel plates. The deep-stamping process increases structural rigidity, ensuring the plate maintains its shape even after contact with rocks, stumps, or rough terrain.

Engineered for a precise fit, this skid plate installs as a direct bolt-on using factory mounting points, requiring no drilling or cutting. The aluminum alloy construction is inherently corrosion-resistant, so you never have to worry about rust or structural degradation even if the protective coating is scratched during heavy off-road use.

• Manufactured from 1/4-inch (6mm) deep-stamped aluminum alloy
• Lightweight design minimizes impact on vehicle suspension and fuel economy
• Corrosion-resistant material prevents rust in harsh environments
• Direct bolt-on installation with no drilling or cutting required
• Provides critical protection for the engine and oil pan
• Manufacturer Part Number: 2333.9542.1.6