Fits select 1975-1989 Volvo 242, 244, and 245 models.

Brembo UV Coated rotors are engineered as direct-fit replacements that meet or exceed original equipment specifications. These rotors feature an environmentally friendly, solvent-free UV coating applied to the disc, including the braking surfaces, to provide superior corrosion protection and a cleaner aesthetic. To optimize driving comfort, these rotors utilize high-carbon cast iron to minimize noise and vibration (NVH) while enhancing thermal performance.

• Precision Engineering: Direct-replacement design that bolts to factory mounting points with no modifications.
• UV Coating: Advanced protection against rust and environmental wear on the entire rotor surface.
• Complete Installation: Includes a fixing screw kit with all necessary hardware for a straightforward replacement.
• Intelligent Marking: Permanent marking on the rotor indicates the part number and minimum thickness for easy maintenance checks.
• Manufacturer Part Number: 08.4982.10

Fits select 1974-1997 Volvo 164, 240, 242, 244, 245, 262, 264, 265, 740, 745, 760, 780, 940, and 960.

Brembo UV Coated rotors are engineered as direct-fit replacements that meet or exceed OEM specifications. The solvent-free UV coating protects the entire disc surface, including the hub and outer edge, against corrosion and environmental wear. Crafted from high-carbon cast iron, these rotors are designed to minimize harmonic vibration and noise while providing superior thermal management for consistent braking performance and enhanced driving comfort.

Each rotor features intelligent marking that clearly displays the part number and minimum thickness directly on the casting for easy maintenance checks. For optimal safety and performance, rotors and pads should be replaced together; pair this rotor with Brembo NAO, Ceramic, or Low-Met brake pads to restore factory braking efficiency.

• Direct Fit: Designed to install seamlessly onto factory mounting points as a high-quality OE equivalent.
• UV Coating: Environmentally friendly protective layer ensures long-lasting resistance to rust and corrosion.
• High-Carbon Casting: Dampens NVH (noise, vibration, and harshness) for smoother, quieter operation.
• Included Hardware: Comes with a fixing screw kit containing all necessary hardware for a straightforward installation.
• Specifications: Features intelligent marking for part number and minimum thickness identification.
• Manufacturer Part Number: 08.3441.24

Vehicle Fitment

The Brembo PISTA D-Bobbin Hardware Pack (MPN 915503) provides the critical mounting interface required for high-performance semi-floating brake rotors. Specifically engineered for racing applications, this 10-hole hardware kit enables controlled thermal expansion of the brake disc under high heat. This semi-floating design reduces mechanical stress on the rotor hat, significantly lowering the risk of disc warping and cracking during aggressive track use.

• Series: Brembo PISTA
• Hardware Type: D-Bobbin Semi-Floating System
• Mounting Specification: 10-Hole Configuration
• Flange Size: 8mm
• Manufacturer Part Number: 915503

This professional-grade hardware pack ensures precise rotor alignment and consistent pedal feel by maintaining the necessary clearances between the rotor ring and the bell. It is an essential component for refreshing or assembling Brembo racing brake systems.

The Brembo PISTA D-Bobbin Semi-Floating Hardware Pack is a professional-grade component set designed for high-performance racing brake systems. This hardware kit is specifically engineered to accommodate 10-hole mounting patterns on rotors with a 6mm flange thickness, allowing the disc to expand and contract freely under extreme thermal stress.

• Manufacturer Part Number: 915502
• Series: Brembo PISTA
• Bobbin Design: D-Bobbin (Semi-Floating)
• Fitment: 10-Hole Mounting Discs
• Flange Specification: 6mm
• Application: Track and Competition Brake Assemblies

By utilizing a semi-floating D-bobbin configuration, this kit reduces the risk of rotor warping and ensures a consistent pedal feel through multiple heat cycles. This pack includes the necessary precision hardware to properly mount a single disc to its corresponding bell or hat.

Fits select 2007-2014 Subaru WRX and 2011 WRX STI (2.5L).

The Brembo TY3 Sport Rear Disc Rotor is a high-performance braking solution designed for enthusiasts who require consistent stopping power and thermal management. These rotors feature Brembo's signature Type 3 (TY3) curved slot pattern, a technology derived from top-tier motorsport applications to improve initial bite and continuously refresh the brake pad surface.

• Direct replacement for factory rear rotors on select AWD Subaru applications
• TY3 curved slot design clears brake dust, gases, and water for consistent friction
• Enhanced metallurgy resists thermal cracking and brake fade during spirited driving
• Zinc-coated or corrosion-resistant finish on the hat and vane edges
• Precision-machined 316mm diameter and 20mm thickness
• Manufacturer Part Number: 59.E115.74

Fits select 2007-2014 Subaru WRX and 2011 WRX STI AWD models (2.5L).

This Brembo TY3 Sport series front disc rotor is engineered for enthusiasts demanding consistent braking performance under high-thermal stress. Featuring the motorsport-derived Type 3 (TY3) slot pattern, these rotors improve initial bite by continuously cleaning the pad surface and venting out gasses and dust. The 326mm diameter and 30mm thickness provide the thermal mass necessary for spirited driving and occasional track use while maintaining daily driveability.

• Brembo TY3 Sport series performance rotor
• Advanced Type 3 curved slot pattern for superior pad cleaning and gas venting
• Direct replacement for factory front rotors
• Optimized for heat dissipation and friction consistency
• Dimensions: 326mm x 30mm
• Manufacturer Part Number: 59.E114.22

Fits 2012-2016 Scion FR-S models (excluding vehicles equipped with Electronic Parking Brake).

The Brembo GT (Gran Turismo) Rear Big Brake Kit is engineered to provide increased thermal capacity and more consistent braking performance for the 2012-2016 Scion FR-S. This system replaces the factory rear setup with high-performance components designed for the demands of spirited street driving and track environments. The kit utilizes 2-piston cast aluminum calipers for improved clamping force and pedal feel, paired with larger 1-piece rotors for superior heat dissipation.

• Caliper Type: 2-piston cast aluminum 2-piece body
• Caliper Finish: Gold
• Rotor Dimensions: 316mm diameter x 20mm thickness
• Rotor Design: 1-piece Slotted Type 1 rotors for improved gas venting and pad cleaning
• Installation: Includes all necessary mounting hardware and brackets
• Manufacturer Part Number: 2E5.5003A4

Fits 2012-2016 Scion FR-S (Excludes models equipped with Electronic Parking Brake).

The Brembo GT (Gran Turismo) Rear Big Brake Kit is engineered to provide increased stopping power and consistent thermal management for the 2012-2016 Scion FR-S. This system replaces the factory rear components with high-performance 2-piston cast calipers and oversized 316x20mm 1-piece slotted rotors. The Type 1 slotted pattern effectively clears brake dust and gases while improving initial bite, ensuring reliable deceleration under repeated heavy braking.

• 2-Piston cast 2-piece calipers finished in high-visibility red
• 316x20mm 1-piece Type 1 slotted rotors for improved heat dissipation
• Integrated design maintains proper brake balance and ABS compatibility
• Includes high-performance brake pads and all necessary installation hardware
• Manufacturer Part Number: 2E5.5003A2

Fits 2008-2014 Subaru WRX models.

Upgrade your Subaru's braking performance with the Brembo GT (Gran Turismo) Rear Big Brake Kit. Designed for enthusiasts seeking consistent pedal feel and improved thermal capacity, this kit replaces the factory rear setup with Brembo's world-renowned braking technology. The fixed 2-piston calipers provide a significant increase in stiffness and clamping force compared to OEM sliding calipers.

This system includes 316mm x 20mm 1-piece slotted Type 1 rotors, engineered to dissipate heat effectively and maintain a clean pad surface for optimal friction. The cast aluminum calipers are finished in a signature Gold coating for lasting corrosion resistance and a high-performance aesthetic.

• Fixed 2-piston cast 2-piece calipers for maximum stiffness
• 316mm x 20mm 1-piece Type 1 slotted rotors
• Signature Gold painted finish
• Enhanced thermal management and brake modulation
• Complete hardware set for straightforward installation
• Manufacturer Part Number: 2E5.5002A4

Fits 1992-2002 Dodge Viper RT-10 and GTS models.

Maintain peak parking brake performance and aesthetic consistency with the Brembo GT Series Rear Hand-Brake Kit. This system is designed specifically for the Dodge Viper chassis, providing a dedicated 1-piston cast caliper solution for secondary braking requirements. This kit is an essential component when upgrading to a primary Big Brake Kit to ensure factory-level hand-brake functionality is preserved with Brembo precision and reliability.

• Application: 1992-2002 Dodge Viper RT-10/GTS (Rear)
• Caliper Type: 1-piston cast aluminum floating caliper
• Component Design: 2-piece system for optimized fitment
• Finish: Durable black coating for corrosion resistance
• Function: High-performance hand-brake / parking brake assembly
• Manufacturer Part Number: 2D0.8001A1

Fits 2015-2021 Subaru WRX (VA).

Improve the braking performance and thermal capacity of your Subaru with the Brembo GT (Gran Turismo) Front Big Brake Kit. This system is designed for drivers who demand consistent pedal feel and reliable stopping power during spirited street use or light track days. The kit replaces the factory front calipers and rotors with high-performance Brembo components engineered specifically for the VA chassis.

• Caliper: 4-Piston cast 2-piece aluminum calipers in a signature Gold finish.
• Rotor: 326mm x 30mm 1-piece vented rotors featuring a Type-1 slotted pattern for improved pad degassing and initial bite.
• Hardware Included: Stainless steel braided brake lines, high-performance brake pads, and all necessary mounting brackets for a direct-fit installation.
• Manufacturer Part Number: 1E5.6003A4

Fits select 2002-2014 Subaru Impreza and WRX models.

The Brembo GT (Gran Turismo) Front Big Brake Kit is engineered to provide superior stopping power and thermal management for both high-performance street driving and light track use. This system replaces the factory front brakes with high-stiffness 4-piston calipers and larger, more efficient rotors to significantly reduce brake fade and improve pedal modulation.

• Calipers: 4-piston cast 2-piece aluminum calipers for increased clamping force and consistent pressure.
• Rotors: 326mm x 30mm 1-piece slotted rotors (Type 1) designed to clear debris and gases for better pad bite.
• Finish: High-temperature resistant gold coating for a premium aesthetic and corrosion protection.
• Complete Kit: Includes high-performance brake pads and all necessary mounting hardware for a direct-fit installation.
• Manufacturer Part Number: 1E5.6002A4

Fits 2014-2019 Chevrolet Corvette.

The BMR Suspension 15-inch Rear Brake Conversion Kit (DBK573) is engineered for C7 owners who need to fit a smaller 15-inch wheel setup for drag racing applications. Standard factory brakes on the 2014-2019 Corvette are too large to clear most 15-inch wheels; this kit replaces those bulky components to provide the necessary clearance while maintaining reliable stopping performance.

This kit features high-performance drilled and slotted rotors designed to vent gases and dissipate heat effectively under high-load conditions. The included red calipers provide a clean, performance-oriented aesthetic while ensuring consistent clamping force.

• Specifically engineered for 15-inch wheel conversions on C7 models
• Drilled and slotted rotors for improved thermal management and gas venting
• Red powder-coated calipers for durability and visual appeal
• Replaces oversized factory rear brake components
• Manufacturer Part Number: DBK573

Fits 2014-2019 Chevrolet Corvette C7 models.

The BMR Suspension 15-inch rear brake conversion kit (DBK572) is engineered for Corvette owners looking to maximize traction at the drag strip. By downsizing the rear brake assembly, this kit provides the necessary clearance to install 15-inch diameter drag wheels, allowing for a taller tire sidewall and improved 60-foot times.

This comprehensive kit features high-performance black powder-coated calipers and precision-machined drilled and slotted rotors. These rotors are designed to reduce rotating mass while maintaining consistent heat dissipation during heavy braking at the end of a pass.

• Enables fitment of 15-inch drag wheels for improved traction
• Includes two black powder-coated brake calipers
• Drilled and slotted rotors for superior heat management and weight reduction
• Designed specifically for the C7 Corvette chassis
• Manufacturer Part Number: DBK572

Fits select 2010-2015 Chevrolet Camaro and 2014-2019 Chevrolet Corvette models equipped with a 15-inch conversion kit.

Designed specifically as the brake component for BMR 15-inch wheel conversion kits, these calipers provide the critical clearance required to run smaller diameter drag racing wheels. These calipers allow you to downsize from factory wheel diameters to a 15-inch wheel setup, a necessity for serious drag racing applications where maximum sidewall flex and traction are required.

• Designed exclusively for BMR 15-inch wheel conversion kits
• Provides necessary clearance for 15-inch drag wheels
• Durable red finish for corrosion resistance and aesthetics
• Direct replacement or individual component for conversion kit maintenance
• Manufacturer Part Number: DBK355

Fits 2014-2017 Chevrolet SS.

The BMR Suspension 15-inch Brake Conversion Kit (DBK353) is specifically engineered for owners looking to run smaller diameter wheels for drag racing. While the factory Brembo rear brakes provide excellent stopping power, their size prevents the installation of 15-inch wheels, which are preferred for their increased tire sidewall. This kit replaces the bulky OE components with a low-profile alternative designed to clear 15-inch wheel barrels.

• Wheel Compatibility: Engineered to provide the necessary clearance for 15-inch drag wheels.
• High-Performance Rotors: Features drilled and slotted rotors to manage heat and maintain a clean contact patch.
• Durable Finish: Includes calipers finished in a vibrant red powder coat for corrosion resistance and a performance aesthetic.
• Complete Conversion: Specifically designed for the 2014-2017 Chevrolet SS (Zeta II chassis) to ensure proper fitment and operation.
• Manufacturer Part Number: DBK353

Fits 2014-2017 Chevrolet SS. The BMR 15-inch Rear Brake Conversion Kit (DBK351) is a purpose-built solution for enthusiasts looking to maximize traction by running 15-inch drag wheels. Since the factory rear brake assembly is too large to accommodate most 15-inch wheel and slick combinations, this kit provides the necessary clearance for smaller wheel diameters without sacrificing essential stopping performance.

This kit replaces the bulky factory rear components with a streamlined setup designed for the drag strip. It features durable solid rotors and a pair of distinctive red calipers, providing a finished look that stands up to the rigors of high-performance driving. Whether you are building a dedicated track car or a high-horsepower street machine, this conversion is a vital step in optimizing your vehicle's footprint.

• Allows clearance for 15-inch rear drag wheels
• Includes high-quality solid rotors for consistent performance
• Features red calipers for a custom look and reliable clamping
• Replaces restrictive OE rear brake components
• Direct fitment for the Chevrolet SS platform
• Manufacturer Part Number: DBK351

Fits 2008-2009 Pontiac G8.

The BMR Suspension Brake Conversion Kit (DBK350) provides the necessary hardware to modify your vehicle's braking system for specialized wheel fitment. Designed specifically for the Pontiac G8 platform, this kit is finished in a durable black coating to resist corrosion and ensure long-term durability in demanding environments.

• Compatible with 2008-2009 Pontiac G8 models
• Durable black finish for superior protection and aesthetics
• Engineered for precise fitment with factory mounting points
• Helps facilitate specific wheel clearance requirements
• Manufacturer Part Number: DBK350

Fits 1998-2001 Acura Integra GS, GS-R, LS, RS, and Type R models (Non-ABS).

The BLOX Racing Brake Master Cylinder (BXFL-10015) is designed as a direct replacement to restore factory braking performance and hydraulic pressure in non-ABS equipped Integras. Over time, internal seals in the master cylinder can wear, leading to a spongy pedal or fluid bypass; this unit ensures consistent fluid displacement and firm pedal feel by converting mechanical force into the hydraulic pressure required to actuate your calipers.

• Specifically engineered for 1998-2001 Acura Integra Non-ABS brake systems
• High-quality construction designed to meet or exceed OE tolerances
• Essential for maintaining safe braking performance and reliable fluid pressure
• Direct-fit installation to factory hard lines
• Manufacturer Part Number: BXFL-10015

Vehicle Compatibility

The BLOX Racing BXFL-10012 Compact Brake Master Cylinder is engineered for high-performance applications where engine bay space is at a premium. Featuring a precision 3/4-inch bore, this master cylinder provides the consistent hydraulic pressure and tactile pedal feel required for custom brake systems, manual conversions, and hydraulic handbrake setups.

The compact body design allows for clean integration into crowded bays or specialized aftermarket pedal boxes without sacrificing mechanical advantage. Manufactured to exacting tolerances, the BXFL-10012 ensures reliable fluid displacement for consistent braking performance on the street or track.

• Manufacturer Part Number: BXFL-10012
• Bore Diameter: 3/4 inch
• Compact profile for clearance in tight engine compartments
• Suitable for custom brake, clutch, or drift handbrake applications
• High-quality construction for durability under high-pressure conditions

BLOX Racing HP10 brake pads are engineered for high-performance street use and spirited driving, offering a consistent friction coefficient and improved thermal resistance. These pads feature a top-loading design, allowing for quick and efficient pad swaps without the need to remove the caliper from its mounting bracket.

Specifically formulated to balance cold bite with high-temperature stability, the HP10 compound provides reliable stopping power for enthusiasts looking to maintain the performance of their BLOX big brake systems. These are designed as direct replacements for the pads found in BLOX 4-piston caliper kits.

• Brand: BLOX Racing
• Series: HP10
• Caliper Fitment: Fits BLOX 4-Piston Calipers only
• Loading Style: Top-loading
• Part Number: BXBS-10000

Fits 2007-2018 Jeep Wrangler JK models. Artec Industries provides a critical solution for maintaining factory electronic functionality during heavy-duty axle swaps. This 52-tooth tone ring is engineered specifically for 1-ton 14-bolt conversions utilizing factory GM disc brakes.

When swapping a 14-bolt axle into a JK, maintaining the factory ABS and traction control systems is essential for both safety and speedometer accuracy. This precision-cut tone ring provides the exact pulse count required by the JK's computer. It is designed to withstand the rigors of off-road use while ensuring reliable signal pickup for your vehicle's speed sensors.

• Specifically designed for GM 14-bolt factory disc brake configurations
• Precision-cut 52-tooth count for accurate signal pulse
• Integrates with factory Jeep JK ABS and speedometer systems
• Essential component for 1-ton axle conversions
• Manufacturer Part Number: BB1430

Fits 2007-2018 Jeep Wrangler JK models performing a rear axle swap with a 1999-2004 Ford Sterling 10.5 1-ton axle.

The Artec Industries 60 Tooth ABS Kit (BB1060) is an essential component for off-roaders looking to maintain factory electronic functionality after a heavy-duty axle swap. The Jeep JK computer requires a specific 60-tooth count to correctly process wheel speed data; this kit provides the necessary tone rings to allow the factory ABS, Electronic Stability Program (ESP), and cruise control to function without triggering dashboard codes or limp mode.

• Replaces standard tone rings to provide the correct 60-tooth count for JK electronics
• Specifically engineered for 1999-2004 Sterling 10.5 rear axles
• Ensures proper operation of ABS and traction control systems
• Heavy-duty steel construction for durability in off-road environments
• Includes precision-cut tone rings and mounting hardware
• Manufacturer Part Number: BB1060

Upgrade your 2022+ Subaru WRX's braking system with AMS Performance Stainless Steel Brake Lines. Engineered to replace the factory rubber brake hoses, these lines are designed to eliminate the common issue of brake pedal flex under hard braking.

The inherent expansion of OEM rubber lines can lead to a soft, inconsistent pedal feel, especially during demanding driving conditions. These AMS Performance lines feature a robust stainless steel braided construction that resists expansion, ensuring a firmer, more consistent brake pedal response and improved modulation. This translates to more precise control and confidence when pushing your WRX to its limits.

• Reduces brake pedal flex for a firmer feel
• Enhances braking consistency and modulation
• Direct replacement for factory rubber brake hoses
• Constructed from durable stainless steel braiding
• Fitment: 2022+ Subaru WRX
• Manufacturer Part Number: AMS.50.01.0001-1

Fits 2008-2015 Mitsubishi Lancer Evolution X (GSR, MR, MR Touring, SE, and Final Edition).

Upgrade the braking response of your Evolution X with the AMS Performance Stainless Steel Brake Line Kit. Factory rubber lines are prone to expansion and volumetric swelling under high hydraulic pressure, which often results in a "spongy" or vague brake pedal feel. These stainless steel braided lines provide a rigid barrier against expansion, ensuring that hydraulic force is translated directly to the brake calipers for more immediate deceleration and improved pedal modulation.

• Direct replacement for factory rubber brake hoses
• Reduces brake pedal travel and eliminates expansion-related sponginess
• Provides consistent braking performance during high-heat track or spirited driving
• Stainless steel braided construction for superior durability and abrasion resistance
• Includes a complete set of four (4) lines for front and rear applications
• Manufacturer Part Number: AMS.04.01.0004-1

Fits select 2007-2022 Jeep Wrangler and Gladiator models equipped with Alcon rear big brake kits.

This Alcon CIR50 AV1 rear brake pad set is engineered specifically as a high-performance replacement for Alcon big brake kits. Designed to provide consistent friction across a wide range of temperatures, these pads offer the stopping power required for modified Jeeps with larger wheel and tire packages. The set includes all four pads required to service the rear axle.

• Manufacturer Part Number: PNS4450X703.4
• Pad Series: CIR50 AV1
• Thickness: 15mm
• Radial Depth: 44.45mm
• Quantity: Axle Set (4 Pads)
• Application: Direct replacement for Alcon Jeep Rear Big Brake Kits

Fits select 2010-2022 Ford F-150, Chevrolet Silverado, Suburban, and Tahoe, GMC Sierra and Yukon, and Toyota Tacoma.

The Alcon CIR15 AV1 Front Brake Pad Set (PNS4415X504.4) is engineered to deliver superior stopping power and improved thermal stability for heavy-duty and performance applications. These pads are formulated to withstand high operating temperatures, significantly reducing brake fade during demanding driving conditions, heavy hauling, or towing.

• Enhanced Control: Optimized friction material for shorter braking distances and consistent pedal feel.
• Thermal Management: Built to resist high-heat cycles and minimize performance degradation during aggressive use.
• Rugged Durability: Designed for reliability in demanding environments across a wide range of half-ton and mid-size truck platforms.
• Position: Front
• Manufacturer Part Number: PNS4415X504.4

Fits select 2010-2022 Chevrolet Silverado, Suburban, and Tahoe; Ford F-150; GMC Sierra and Yukon; and Toyota Tacoma.

Maintain the performance and reliability of your high-performance braking system with the Alcon Front Pad Retainer Pin Kit. This kit is a direct replacement for the hardware found in Alcon 6-piston calipers, specifically those associated with part number PNS4415X. Over time, heat cycles and environmental exposure can fatigue retainer springs and corrode pins, leading to uneven pad wear or annoying brake chatter.

This kit provides the essential components to secure your brake pads properly within the caliper housing, ensuring consistent pad retraction and quiet operation during daily driving or heavy-duty use.

• Complete replacement set for front 6-piston Alcon calipers
• Includes precision-machined pad retainer pins
• Includes anti-rattle tension spring to eliminate pad movement and noise
• Direct fit for Alcon caliper PN PNS4415X hardware
• Manufacturer Part Number: PKR4415X540KS

Fits 2009-2021 Nissan GT-R (Base, Premium, Nismo, Black Edition, Track Edition, Pure, T-spec, and 50th Anniversary Edition).

This Alcon Gen 1/2 Rear Right Rotor Ring Kit is an essential component for maintaining high-performance braking on the R35 platform. Engineered with a floating rotor system, this 380x30mm ring is specifically designed to accommodate the extreme thermal expansion that occurs during aggressive track or street use. By allowing the disc to expand freely, the design significantly reduces the likelihood of coning and minimizes vibration throughout the life of the component.

• Optimized Cooling: Features directionally curved cooling vanes designed to maximize airflow and thermal dissipation.
• Floating System Architecture: Engineered to minimize vibration and accommodate thermal expansion under high-heat conditions.
• Precision Dimensions: 380mm diameter and 30mm thickness for exact fitment within compatible Alcon kits.
• Orientation: Rear Right side specific.
• Manufacturer Part Number: DKR2175X757C24R

Fits 2009-2021 Nissan GT-R (R35) models including Base, Premium, Black Edition, Track Edition, Nismo, and T-spec. This Alcon Gen 1/2 rear left rotor ring is engineered as a high-performance replacement component for R35 braking systems using 380x30mm specifications.

Constructed with directionally curved cooling vanes, this rotor ring is designed to optimize airflow and maintain stable operating temperatures under heavy braking loads. The floating rotor design accommodates thermal expansion during high-performance driving, significantly reducing the risk of disc distortion and pedal vibration. This kit ensures consistent friction levels and long-term durability for street and track applications.

• Position: Rear Left
• Diameter: 380mm
• Thickness: 30mm
• Vane Configuration: Directionally curved for maximum cooling efficiency
• System Design: Floating rotor architecture for thermal expansion management
• Manufacturer Part Number: DKR2175X757C24L