Fits 2018-2019 Hyundai Elantra Limited, SE, SEL, and Value Edition models (L4-2.0L).

The AEM 21-869C Performance Cold Air Intake System is engineered to improve engine efficiency by replacing the restrictive factory air box and filter housing. This system utilizes a mandrel-bent aluminum intake tube, finished in a durable gunmetal gray powder coat, to provide a smooth, low-restriction path for airflow. By relocating the air filter and utilizing the included heat shield, the system is designed to isolate the intake charge from engine bay heat, resulting in cooler, denser air for the 2.0L engine.

This intake features an oversized AEM Dryflow synthetic air filter. The oil-free, washable media provides excellent filtration while maintaining high flow rates, and can be used for up to 100,000 miles before cleaning is required under normal driving conditions. Designed for a direct-fit installation, the 21-869C accommodates the factory mass airflow (MAF) sensor and breather tube, requiring no permanent modifications to your vehicle's emissions control system.

• Mandrel-bent aluminum intake tube with gunmetal gray powder-coated finish
• Includes oversized, oil-free Dryflow synthetic washable air filter
• Integrated heat shield reduces intake air temperatures
• Retains factory mass airflow sensor and breather tube connections
• Direct bolt-on installation using common hand tools
• Manufacturer Part Number: 21-869C
• Backed by AEM Lifetime Limited Warranty

Fits select 2018-2023 Genesis G70 and Kia Stinger models (L4-2.0L).

The AEM 21-867C Cold Air Intake System is engineered to improve horsepower and torque by replacing the restrictive factory air filter and intake housing. This system features a mandrel-bent aluminum intake tube with a durable gunmetal gray powder-coated finish, ensuring smooth, laminar airflow to the engine. To protect the intake charge from engine bay heat, the system includes a vehicle-specific heat shield that utilizes the original air box space.

Filtration is handled by an oversized AEM Dryflow synthetic air filter. This oil-free, tapered cylinder media provides excellent filtration and can go up to 100,000 miles between cleanings under normal driving conditions. The system is designed to accommodate all factory emissions control devices, including the mass airflow (MAF) sensor and breather tube, for a straightforward installation using common tools.

• Mandrel-bent aluminum intake tube with gunmetal gray powder coat finish
• Oil-free Dryflow synthetic washable air filter for high-efficiency filtration
• Custom heat shield designed to reduce intake air temperatures
• Retains factory mass airflow sensor and breather tube locations
• Manufacturer Part Number: 21-867C
• AEM Lifetime Limited Warranty

Fits 2019-2023 Toyota Corolla models including LE, SE, and XSE trims (2.0L).

Upgrade your vehicle's induction system with the AEM 21-865C Cold Air Intake System. Designed to replace the restrictive factory air box and paper filter, this system utilizes a mandrel-bent aluminum intake tube to provide a smooth, low-restriction path for airflow. The tube is finished in a durable gunmetal gray powder coat for long-lasting corrosion resistance and a clean engine bay aesthetic. By positioning the filter to draw in cooler outside air and protecting it with a custom-engineered heat shield, this system helps reduce intake temperatures to improve combustion efficiency.

Filtration is handled by an oversized AEM Dryflow synthetic air filter. This oil-free, washable media provides excellent filtration efficiency and can go up to 100,000 miles before cleaning is required, depending on driving conditions. The system is engineered to accommodate all factory emissions components, including the mass airflow (MAF) sensor and breather tube, ensuring a straightforward installation with standard hand tools.

• Direct fit for 2019-2023 Toyota Corolla 2.0L
• Mandrel-bent aluminum intake tube with gunmetal gray finish
• Includes oil-free, washable AEM Dryflow synthetic air filter
• Custom heat shield helps block engine bay heat soak
• Retains factory mass airflow sensor and breather locations
• Backed by AEM Lifetime Limited Warranty
• Manufacturer Part Number: 21-865C

The AEM Induction 21-863WR Cold Air Intake system is engineered to increase horsepower and torque for the 2019-2021 Subaru WRX STI (2.5L). This performance intake replaces the restrictive factory air box with a mandrel-bent aluminum intake tube and an oversized filter to improve airflow and throttle response.

Fits 2019-2021 Subaru WRX STI Base, Limited, and S209 (2.5L).

The system features an AEM Dryflow synthetic air filter, which provides high-capacity filtration without the need for oil. This washable, reusable media is designed to go up to 100,000 miles between services under normal highway driving conditions. To maintain low intake temperatures, the kit includes a custom heat shield that integrates with the factory fresh air duct to isolate the filter from engine bay heat.

• Mandrel-bent aluminum intake tube with durable wrinkle red powder coat
• Oversized AEM Dryflow oil-free synthetic washable air filter
• Custom heat shield preserves factory air ducting functionality
• Designed for straightforward installation in approximately 90 minutes
• Includes all necessary mounting hardware and high-quality couplers
• Manufacturer Part Number: 21-863WR

Fits 2019-2021 Subaru WRX STI (2.5L). This AEM cold air intake system is engineered to increase horsepower and torque by delivering a higher volume of cooler, denser air to your engine. The system replaces the restrictive factory air box and features a mandrel-bent aluminum intake tube to streamline airflow and reduce turbulence.

The included oversized AEM DRYFLOW synthetic air filter utilizes oil-free media, allowing for outstanding filtration and airflow without the need for re-oiling. Designed for longevity, this conical filter can go up to 100,000 miles between services under normal highway driving conditions. A custom-designed heat shield is provided to isolate the filter from engine bay heat, and it integrates directly with the factory fresh air duct for maximum efficiency.

• Part Number: 21-863C
• Filter Type: AEM DRYFLOW (Washable, Oil-Free Synthetic)
• Tube Material: Mandrel-bent aluminum
• Installation: Typically completed in less than 90 minutes using included hardware
• Service Interval: Up to 100,000 miles between cleanings

Each system is designed for a precise fit on the EJ25 engine, utilizing factory mounting points for a secure, bolt-on installation.

Fits 2019-2021 Volkswagen Jetta R-Line, S, SE, SEL, and SEL Premium (1.4L).

The AEM Induction 21-862C Performance Cold Air Intake System is engineered to increase horsepower and torque by replacing the restrictive factory air filter and intake housing. This system features a mandrel-bent aluminum intake tube finished in a durable gunmetal gray powder coat, ensuring smooth, laminar airflow to the engine while resisting heat soak.

At the heart of the system is an oversized AEM Dryflow synthetic washable air filter. This oil-free, tapered cylinder filter media provides excellent filtration and can be used for up to 100,000 miles before cleaning is required. A custom-engineered heat shield is included to isolate the filter from engine bay heat, ensuring a cooler, denser air charge for better combustion. The system is designed to accommodate all factory emissions control devices, including the breather hose, for a seamless installation.

• High-Flow Filtration: Washable, oil-free synthetic Dryflow media maintains airflow efficiency and protects against contaminants.
• Mandrel-Bent Aluminum: Precision-bent tube for maximum airflow, finished in gunmetal gray powder coating.
• Heat Management: Integrated heat shield reduces intake air temperatures by shielding the filter from engine heat.
• Direct Fit: Designed to install easily using commonly available tools and factory mounting points.
• Maintenance: Filter requires cleaning only every 100,000 miles under normal driving conditions.
• MPN: 21-862C
• Warranty: Backed by AEM's Lifetime Limited Warranty.

Fits 2019-2024 Kia Forte and 2020 Hyundai Elantra (2.0L).

The AEM 21-858C Cold Air Intake System is engineered to improve engine breathing by replacing the restrictive factory airbox with a high-flow induction system. Designed, tuned, and dyno-tested, this system helps increase horsepower and torque by delivering cooler, denser air to the engine. The system features a mandrel-bent aluminum intake tube finished in a durable gunmetal gray powder coat for optimized airflow and a professional under-hood appearance.

• Dryflow Air Filter: Includes a cone-shaped, oil-free synthetic Dryflow air filter that provides high-efficiency filtration and can last up to 100,000 miles before cleaning is required.
• Heat Management: Features a custom-shaped heat shield with edge trim lining to isolate the intake from high engine bay temperatures.
• Precision Build: Mandrel-bent aluminum tubing maintains consistent diameters through bends to minimize turbulence and maximize velocity.
• Maintenance: Washable and reusable synthetic filter media eliminates the need for oil, simplifying service.
• Warranty: Backed by AEM's Lifetime Limited Warranty.

Kit Includes: Mandrel-bent aluminum intake tube, Dryflow air filter, custom heat shield, and all necessary mounting hardware.

Fits 2017-2022 Honda CR-V models (EX, EX-L, LX, Special Edition, Touring) equipped with the L4-1.5L engine.

The AEM 21-857C Cold Air Intake System is engineered to increase horsepower and torque by replacing the restrictive factory air box and paper filter. This system features a mandrel-bent aluminum intake tube finished in a durable gunmetal gray powder coat, ensuring smooth, laminar airflow to the turbocharger. By positioning the filter within the original air box footprint and utilizing a custom-designed heat shield, the system helps lower intake air temperatures for a denser oxygen charge.

• Dryflow Filtration: Includes an oversized, oil-free Dryflow synthetic washable air filter, capable of going up to 100,000 miles between cleanings depending on driving conditions.
• Precision Engineering: Developed specifically for the 1.5L CR-V to accommodate factory emissions control devices, including the mass airflow (MAF) sensor and breather tube.
• Durable Construction: Mandrel-bent aluminum prevents tube collapsing and optimizes internal volume; gunmetal gray finish provides long-term corrosion resistance.
• Installation: Bolt-on design requires only commonly available hand tools; fits factory mounting points.
• Manufacturer Part Number: 21-857C
• Warranty: Backed by AEM's Lifetime Limited Warranty.

Fits 2017-2019 Subaru Legacy 2.5i, Limited, Premium, and Sport models (H4-2.5L).

The AEM 21-856C Performance Cold Air Intake System is engineered to increase horsepower and torque by replacing the restrictive factory air box and paper filter. This system features a mandrel-bent aluminum intake tube finished in a durable gunmetal gray powder coat, designed to maintain smooth, laminar airflow into the engine. By relocating the air filter into the original air box space and utilizing a custom heat shield, this intake helps reduce inlet temperatures for a denser oxygen charge.

Equipped with an oversized, tapered-cylinder AEM Dryflow air filter, this system provides exceptional filtration without the need for oil. The synthetic media is washable and can go up to 100,000 miles between cleanings under normal highway driving conditions. The system is designed to accommodate all factory emissions components, including the mass airflow (MAF) sensor and breather tube, for a straightforward installation using common hand tools.

• Finish: Gunmetal Gray powder-coated aluminum
• Filter Type: Oil-free AEM Dryflow synthetic media
• Maintenance: Up to 100,000 miles before first cleaning
• Components: Mandrel-bent tube, heat shield, and mounting hardware included
• Warranty: AEM Lifetime Limited Warranty
• MPN: 21-856C

Fits 2018-2024 Toyota Camry models (L4-2.5L) including Hybrid LE, SE, and XLE; L, LE, SE, SE Nightshade, XLE, and XSE.

The AEM 21-855C Cold Air Intake System is engineered to replace the restrictive factory air box, providing a more efficient path for airflow to your engine. The system utilizes a mandrel-bent aluminum intake tube finished in a durable gunmetal gray powder coat to ensure smooth airflow and long-lasting corrosion resistance. A custom-shaped heat shield with edge trim lining is included to isolate the intake from radiant engine bay heat.

This system features an oversized AEM Dryflow air filter, constructed from an oil-free synthetic media. This design offers excellent filtration and airflow without the maintenance hassle of re-oiling. The filter is washable and reusable, capable of going up to 100,000 miles between cleanings under normal driving conditions.

• Mandrel-bent aluminum tube with gunmetal gray powder-coated finish
• Oil-free synthetic Dryflow air filter media for simplified maintenance
• Includes custom heat shield to block engine bay heat
• Washable and reusable filter media for long-term value
• Manufacturer Part Number: 21-855C
• Backed by AEM Lifetime Limited Warranty

Fits 2018-2022 Honda Accord (L4-1.5L).

The AEM 21-854C Cold Air Intake System is engineered to replace the restrictive factory airbox with a high-flow, mandrel-bent aluminum intake tube. This system is designed, tuned, and dyno-tested to improve airflow efficiency, providing measurable increases in horsepower and torque response for the 1.5L turbocharged engine.

• Dryflow Technology: Includes a cone-shaped AEM Dryflow air filter made from oil-free, synthetic media that can go up to 100,000 miles before cleaning is required (depending on conditions).
• Durable Construction: Features a mandrel-bent aluminum intake tube finished in a resilient gunmetal gray powder coat for lasting engine bay aesthetics and corrosion resistance.
• Heat Management: A custom-shaped heat shield with edge trim lining is included to block radiant engine bay heat from entering the intake tract.
• Direct Fit: Designed to bolt into factory mounting points for a straightforward installation.
• Manufacturer Part Number: 21-854C
• Warranty: Protected by the AEM Lifetime Limited Warranty.

Fits select 2013-2020 Subaru BRZ, Scion FR-S, and Toyota 86 models (H4-2.0L).

The AEM 21-853C Performance Air Intake System is engineered to reduce intake restriction by replacing the factory air box and intake tract. This system features a mandrel-bent aluminum intake tube with a durable gunmetal gray powder-coated finish, ensuring smooth, laminar airflow to the engine. To help manage intake temperatures, a custom-shaped heat shield with edge trim lining is included to isolate the air filter from radiant engine bay heat.

At the heart of this system is the cone-shaped AEM Dryflow air filter. This oil-free, synthetic filter media provides high-efficiency filtration and can be used for up to 100,000 miles before cleaning is required, depending on driving conditions. Because the media is synthetic and oil-free, there is no risk of over-oiling a MAF sensor during maintenance.

• Manufacturer Part Number: 21-853C
• Tube Material: Mandrel-bent aluminum
• Finish: Gunmetal Gray powder coat
• Filter Media: Oil-free synthetic Dryflow
• Service Life: Washable and reusable up to 100,000 miles
• Hardware included: Intake tube, Dryflow filter, heat shield, and mounting hardware
• Warranty: AEM Lifetime Limited Warranty

Fits select 2018-2025 Kia Stinger and Genesis G70 models equipped with the V6-3.3L twin-turbo engine.

The AEM 21-849DS Cold Air Intake System is engineered to reduce intake restriction and deliver a cooler, oxygen-rich air charge to your engine. Designed and dyno-tested to improve throttle response and engine sound, this system replaces both the left and right side factory intake assemblies. It features dual roto-molded plastic intake tubes and durable powder-coated heat shields that integrate with the factory air ducting for optimal thermal management.

This system utilizes two cone-shaped AEM Dryflow air filters. Made from an oil-free, synthetic media, these filters provide excellent filtration and can be used for up to 100,000 miles before cleaning is required (depending on driving conditions). Installation is straightforward, utilizing factory mounting points for a secure, OE-style fit.

• Replaces restrictive factory intake housing for improved airflow
• Oil-free, synthetic Dryflow air filter is washable and reusable
• Durable powder-coated heat shields protect against engine bay heat
• Roto-molded intake tubes designed for efficient air delivery
• Backed by AEM's Lifetime Limited Warranty
• Manufacturer Part Number: 21-849DS

Fits 2015-2020 Hyundai Sonata and Kia Optima models equipped with the L4-2.4L engine.

Replace your restrictive factory air box with the AEM Performance Air Intake System (21-848C) to improve airflow and engine efficiency. This system is designed, tuned, and dyno-tested to provide better throttle response by delivering cooler, denser air to the engine. The intake features a mandrel-bent aluminum tube for smooth airflow, finished in a durable gunmetal gray powder coating for long-lasting corrosion resistance and a clean engine bay aesthetic.

At the heart of this system is an oversized AEM Dryflow synthetic air filter. This oil-free, washable media provides exceptional filtration and airflow, capable of going up to 100,000 miles between cleanings depending on driving conditions. To further protect intake temperatures, a custom-shaped heat shield with a lid is included to isolate the filter from high under-hood heat.

• Mandrel-Bent Tubing: High-grade aluminum construction with gunmetal gray finish.
• Dryflow Filter: Oil-free synthetic media is easy to clean and requires no re-oiling.
• Thermal Management: Included heat shield and lid reduce heat soak.
• Direct Fit: Bolts to factory mounting points with included hardware.
• MPN: 21-848C
• Warranty: Backed by AEM's Lifetime Limited Warranty.

Fits 2017-2026 Subaru Impreza and 2018-2025 Subaru Crosstrek models equipped with the L4-2.0L engine.

The AEM 21-846C Performance Air Intake System is engineered to replace the restrictive factory air housing, providing a more efficient path for airflow to reach your engine. By relocating the filter to draw in cooler outside air, this system improves combustion efficiency for enhanced throttle response and engine performance. The intake tube is constructed from mandrel-bent aluminum with a durable gunmetal gray powder-coated finish, ensuring consistent pipe diameter through every bend for maximum flow velocity.

This system includes a custom-shaped heat shield with edge trim lining to isolate the intake charge from radiant engine bay heat. At the heart of the kit is a cone-shaped AEM Dryflow air filter made from oil-free, synthetic media. This washable and reusable filter provides excellent filtration and can be used for up to 100,000 miles before cleaning is required, depending on driving conditions.

• Increased Airflow: Mandrel-bent aluminum tubing replaces restrictive OE plumbing.
• Dryflow Technology: Oil-free synthetic filter media is easy to clean and maintains high flow rates without the risk of fouling MAF sensors.
• Heat Isolation: Included custom heat shield protects the air intake from high under-hood temperatures.
• Direct Fit: Designed to bolt into factory mounting points for a secure installation.
• Specifications: Mandrel-bent aluminum tube; gunmetal gray powder coat finish; synthetic oil-free filter media.
• Manufacturer Part Number: 21-846C
• Warranty: Backed by AEM's Lifetime Limited Warranty.

Fits 2007-2013 BMW 328i, 328i xDrive, and 328xi (L6-3.0L).

The AEM 21-841DS Performance Air Intake System is engineered to replace the restrictive factory airbox and intake tract, providing your engine with a higher volume of cleaner air. This system utilizes a custom-designed, roto-molded aerodynamic air box that integrates directly with the factory fresh air inlets to ensure a steady supply of cool outside air. By streamlining the intake path with a replacement air duct, this system is designed and dyno-tested to improve throttle response and engine output.

• Includes an oversized AEM Dryflow synthetic, oil-free air filter for high-efficiency filtration
• Washable and reusable filter media lasts up to 100,000 miles between cleanings
• Roto-molded air box protects the intake charge from engine bay heat
• Direct-fit design utilizes factory mounting points for a straightforward installation
• Backed by AEM's Lifetime Limited Warranty
• Manufacturer Part Number: 21-841DS

Fits select 2014-2020 Mini Cooper, Cooper Clubman, and Cooper Countryman models, and 2015-2019 BMW X1 and X2 (L4-2.0L).

The AEM 21-839C Cold Air Intake System replaces the restrictive factory airbox with a high-flow, mandrel-bent aluminum intake tube and an oversized Dryflow synthetic filter. Designed and dyno-tested to improve engine aspiration, this system reduces intake restriction to support increased horsepower and torque throughout the RPM range. The intake tube features a durable gunmetal gray powder-coated finish for long-lasting corrosion resistance and a clean engine bay aesthetic.

This kit includes a vehicle-specific heat shield with edge trim lining to isolate the intake air from high engine compartment temperatures. At the heart of the system is the AEM Dryflow air filter, a washable, oil-free synthetic media that provides excellent filtration efficiency and allows for up to 100,000 miles of use between cleanings under normal highway driving conditions.

• Construction: Mandrel-bent aluminum tubing with gunmetal gray powder coating
• Filter Media: Oil-free Dryflow synthetic (washable and reusable)
• Components Included: Intake tube, Dryflow air filter, custom heat shield, and mounting hardware
• Maintenance: Up to 100,000 miles before cleaning (depending on conditions)
• Warranty: Backed by AEM Lifetime Limited Warranty
• Manufacturer Part Number: 21-839C

Fits 2018 Subaru WRX STI Base, Limited, and Type RA models (2.5L).

The AEM 21-836WR Performance Cold Air Intake System is engineered to improve engine breathing by replacing the restrictive factory air box and paper filter. This system features a mandrel-bent aluminum intake tube with a durable wrinkle red powder-coated finish, specifically designed to maintain compatibility with the factory mass air flow (MAF) sensor and emissions equipment.

Air is drawn through an oversized AEM Dryflow synthetic air filter, which utilizes oil-free media for consistent filtration and easy maintenance. The filter is positioned within a custom heat shield designed to block radiant engine heat, ensuring a cooler, denser air charge enters the engine. This direct-fit upgrade installs in the factory air box location using standard hand tools.

• Mandrel-bent aluminum tubing with wrinkle red finish for smooth airflow and heat resistance.
• AEM Dryflow oil-free synthetic filter is washable and reusable for up to 100,000 miles between cleanings.
• Integrated heat shield reduces intake air temperatures (IATs).
• Retains factory emissions control devices and MAF sensor mounting.
• Includes all necessary hardware for a complete installation.
• Backed by AEM's Lifetime Limited Warranty.
• Manufacturer Part Number: 21-836WR

Fits 2006-2013 Lexus IS250 and IS350 (V6-2.5L).

Replace your restrictive factory airbox with the AEM C.A.S. (Cold Air Intake System), designed to improve engine breathing and airflow efficiency. This system features a mandrel-bent aluminum intake tube finished in a durable gunmetal gray powder coat, ensuring smooth, laminar airflow to the engine. To protect the intake charge from high underhood temperatures, a custom-shaped heat shield with edge trim lining is included, isolating the filter from engine bay heat.

The system utilizes an AEM Dryflow air filter, a synthetic, oil-free media that provides excellent filtration and airflow without the need for re-oiling. This washable, reusable filter is designed for long service intervals, lasting up to 100,000 miles before cleaning is required under normal driving conditions.

• Manufacturer Part Number: 21-833C
• Tube Material: Mandrel-bent aluminum
• Tube Finish: Gunmetal gray powder coat
• Filter Type: Oil-free synthetic Dryflow media
• Service Interval: Up to 100,000 miles before cleaning
• Heat Shield: Included with edge trim
• Warranty: AEM Lifetime Limited Warranty

Fits select 2018-2025 Lexus ES350, Toyota Avalon, and Toyota Camry (V6-3.5L).

The AEM 21-827C Performance Air Intake System replaces your vehicle's restrictive factory air filter and intake housing with a high-flow, mandrel-bent aluminum intake tube and an oversized AEM Dryflow air filter. Designed and dyno-tested to improve airflow efficiency, this system delivers measurable gains in horsepower and torque while providing a more aggressive engine note under acceleration. The intake tube features a durable gunmetal gray powder-coated finish for long-lasting corrosion resistance and a clean look under the hood.

This kit includes a custom-shaped heat shield with edge trim lining to isolate the air intake from high engine bay temperatures, ensuring a cooler, denser air charge. The included cone-shaped Dryflow air filter is constructed from an oil-free synthetic media, offering excellent filtration and a service interval of up to 100,000 miles before cleaning is required, depending on driving conditions.

• Mandrel-Bent Tubing: High-grade aluminum construction with a gunmetal gray powder coat finish.
• Dryflow Filtration: Washable, reusable, oil-free synthetic filter media simplifies maintenance.
• Heat Management: Custom heat shield helps protect intake air from radiant engine heat.
• Direct Fit: Engineered to bolt on using factory mounting points.

• Manufacturer Part Number: 21-827C
• Filter Material: Non-woven synthetic (oil-free)
• Tube Material: Mandrel-bent aluminum
• Warranty: AEM Lifetime Limited Warranty

Fits select 2007-2016 BMW 1 Series M, 135i, 335i, 335is, 535i, and Z4 (V6-3.0L).

The AEM 21-825DS Performance Air Intake System is engineered to replace restrictive factory air intake components with a free-flowing, roto-molded aerodynamic air box. By drawing air from factory fresh air inlets and routing it through a high-flow synthetic media, this system reduces intake restriction to improve engine breathing and throttle response. This intake also produces a deeper, more aggressive induction tone during acceleration.

At the heart of this system is an oversized AEM Dryflow synthetic filter. This oil-free media provides exceptional filtration and performance for up to 100,000 miles before cleaning is required, depending on environmental conditions. Designed for a straightforward installation, the system utilizes high-quality replacement air ducting to ensure a precise fit within the engine bay.

• Manufacturer Part Number: 21-825DS
• Filter Media: Oil-free, washable AEM Dryflow synthetic
• Air Box: Roto-molded, aerodynamic housing
• Maintenance: Up to 100,000 miles between filter cleanings
• Included Hardware: Complete replacement air duct and air box assembly
• Warranty: AEM Lifetime Limited Warranty

Fits 2011-2017 Infiniti M37 and Q70 (V6-3.7L).

The AEM 21-823DS is a complete twin intake system engineered specifically for the Infiniti VQ37VHR engine's dual throttle body configuration. By replacing both the driver and passenger side factory air boxes, intake tubes, and filters, this system provides a more direct path for airflow. Each side features an oversized AEM Dryflow synthetic air filter and a custom heat shield with rubberized edge trim to isolate the intake charge from engine bay heat.

This system is designed for ease of maintenance and long-term durability. The included oil-free Dryflow filters utilize a washable synthetic media that can go up to 100,000 miles between cleanings, depending on driving conditions. Both factory MAF sensors mount directly to the new intake tubes for a straightforward installation that maintains critical sensor alignment.

• Dual-tube intake design accommodates individual bank throttle bodies
• Washable, oil-free synthetic Dryflow filter media for easy maintenance
• Steel heat shields with rubberized trim to reduce intake temperatures
• Retains factory MAF sensor mounting locations
• Manufacturer Part Number: 21-823DS
• Backed by AEM's Lifetime Limited Warranty

Fits 2009-2020 Nissan 370Z (3.7L).

The AEM 21-821DS Performance Cold Air Intake System is engineered to unlock horsepower and torque by replacing the restrictive factory air boxes and intake plumbing. Designed specifically for the Nissan 370Z, this dual-intake system features left and right-side mandrel-bent aluminum tubes finished in a durable gray powder coat. The two-piece heatshield integrates with the factory air ducting to isolate the filters from engine bay heat, ensuring a denser air charge for the VQ37VHR engine.

This system utilizes AEM Dryflow synthetic air filters, which provide high airflow and filtration efficiency without the need for oiling. The intake is designed to accommodate the factory mass air flow (MAF) sensors and PCV hoses for a seamless installation that maintains proper engine management signals.

• Mandrel-bent aluminum intake tubes with gray powder-coated finish
• Dual intake design replaces both left and right factory assemblies
• Oil-free AEM Dryflow synthetic washable air filters (up to 100,000 miles before servicing)
• Custom two-piece heatshield utilizes OEM air ducting
• Direct bolt-on installation using factory mounting points
• Manufacturer Part Number: 21-821DS
• Backed by AEM's Lifetime Limited Warranty

Fits 2003-2006 Dodge Ram 2500 and 3500 models equipped with the 5.9L diesel engine.

The AEM 21-8211DC Brute Force Air Intake System is engineered to unlock horsepower and torque by replacing the restrictive factory air filter and intake housing. This system features mandrel-bent aluminum intake tubing with a durable gunmetal gray powder-coated finish, ensuring smooth, laminar airflow to your engine. To maintain lower intake air temperatures, the system includes a dedicated heat shield that isolates the filter from engine bay heat.

Equipped with an extra-large AEM Dryflow synthetic air filter, this intake provides exceptional filtration without the need for filter oil. The oil-free design simplifies maintenance, offering a service interval of up to 100,000 miles under normal driving conditions. This system is designed for a seamless installation, accommodating factory emissions control devices including the air inlet temperature sensor and the OEM air filter restriction gauge.

• Mandrel-bent aluminum tubing with gunmetal gray powder coat
• Large tapered cylinder Dryflow oil-free synthetic air filter
• Custom-fit heat shield to reduce intake air temperatures
• Integrates with factory IAT sensor and restriction gauge
• Washable and reusable filter media for long-term value
• Backed by AEM's Lifetime Limited Warranty
• Manufacturer Part Number: 21-8211DC

Fits 2016-2017 Infiniti Q50 and Q60 models equipped with the V6-3.0L engine.

The AEM 21-819 Performance Cold Air Intake System is engineered to improve throttle response and engine sound by replacing the restrictive factory left and right side air filter housings. This dual-bank intake system features two oval-shaped AEM Dryflow air filters constructed from oil-free synthetic media. These filters provide exceptional filtration and high airflow while remaining easy to maintain—simply wash and reuse for up to 100,000 miles between cleanings under normal driving conditions.

The system includes precision-engineered intake tubes designed to mount your factory MAF sensors directly, ensuring proper sensor readings. To help maintain lower intake temperatures, individual heatshields are included to isolate the air filters from engine bay heat. This intake system is built for long-term durability and is backed by AEM's Lifetime Limited Warranty.

• Replaces restrictive factory air boxes for improved airflow
• Dual oil-free synthetic Dryflow air filters (washable and reusable)
• Integrated heatshields protect intake air from engine heat
• Direct mounting points for factory MAF sensors
• AEM Part Number: 21-819
• Backed by a Lifetime Limited Warranty

Fits 2016-2025 Chevrolet Malibu (L4-1.5L).

The AEM 21-813C Cold Air Intake System is engineered to increase horsepower and torque by replacing the restrictive factory air box and paper filter. This system features a mandrel-bent aluminum intake tube with a durable gunmetal gray powder-coated finish, designed to optimize airflow while accommodating the factory mass air flow (MAF) sensor and other emissions control devices.

At the heart of the system is an oversized AEM Dryflow synthetic air filter. This oil-free, washable media provides exceptional filtration and can go up to 100,000 miles before servicing is required under normal driving conditions. The included heat shield is designed to protect the intake charge from radiant engine heat, ensuring cooler, denser air reaches the combustion chamber.

• Mandrel-bent aluminum tubing for smooth, unrestricted airflow
• Gunmetal gray powder-coated finish for heat and corrosion resistance
• Oil-free Dryflow synthetic filter media simplifies maintenance
• Bolts to factory mounting points for a straightforward installation
• AEM Lifetime Limited Warranty

Manufacturer Part Number: 21-813C

Fits 2015-2020 Ford F-150 King Ranch, Lariat, Platinum, SSV, XL, and XLT models (5.0L).

The AEM 21-8129DC Brute Force Air Intake System is engineered to increase horsepower and torque by replacing the restrictive factory air filter and intake housing. This system features a mandrel-bent aluminum intake tube finished in a durable gunmetal gray powder coat, ensuring smooth, laminar airflow to the engine. To protect the intake charge from engine bay heat, a custom-designed heat shield is included to isolate the filter and maintain lower intake air temperatures.

This kit utilizes an extra-large AEM Dryflow synthetic air filter. The oil-free, washable media provides high-efficiency filtration and can be used for up to 100,000 miles before cleaning is required, depending on driving conditions. Designed for a seamless install, the system integrates directly with the factory emissions control devices, including the EVAP vent and crankcase vent hoses.

• Mandrel-bent aluminum intake tubing with gunmetal gray powder-coated finish
• Oil-free Dryflow synthetic washable air filter for high-flow filtration
• Custom heat shield helps reduce intake air temperatures
• Bolts to factory mounting points with commonly available tools
• Includes all necessary hardware for integration with factory EVAP and vent hoses
• AEM Lifetime Limited Warranty
• Manufacturer Part Number: 21-8129DC

Fits 2015-2021 Ford F-150 models including King Ranch, Lariat, Limited, Platinum, SSV, XL, and XLT (3.5L).

The AEM 21-8128DC Performance Cold Air Intake System is engineered to increase horsepower and torque by replacing the restrictive factory air filter and intake housing. This system features mandrel-bent aluminum intake tubes with a durable gunmetal gray powder-coated finish, ensuring smooth, laminar airflow into the engine. By reducing air path restrictions and managing heat, this system provides a consistent supply of oxygen-rich air for improved combustion efficiency.

The system utilizes an oversized AEM Dryflow synthetic air filter, featuring an oil-free media that simplifies maintenance and provides excellent filtration. The filter is positioned within the original air box space and is protected by a custom-designed heat shield to minimize intake air temperatures. This intake accommodates all factory emissions control devices, including the intake air temperature (IAT) sensor, for a seamless installation using standard tools.

• Manufacturer Part Number: 21-8128DC
• Tube Material: Mandrel-bent aluminum
• Finish: Gunmetal Gray powder coat
• Filter Type: Washable, oil-free AEM Dryflow synthetic media
• Maintenance Interval: Up to 100,000 miles before cleaning (depending on driving conditions)
• Installation: Direct bolt-on to factory mounting points
• Warranty: AEM Lifetime Limited Warranty

Fits select 2016-2019 Infiniti Q50 (L4-2.0L).

The AEM 21-807C Cold Air Intake System is engineered to replace the restrictive factory air filter and airbox to improve airflow and engine efficiency. At the core of this system is an oversized, oval-shaped AEM DryFlow filter. This oil-free, synthetic filter media is designed to provide excellent filtration while allowing for service intervals of up to 100,000 miles under normal driving conditions.

This system features a custom heat shield designed to integrate with the factory engine cover, utilizing the cover itself as the top of the airbox. A provided rubber edge trim creates a secure seal between the shield and the engine cover to help isolate the intake air from high engine bay temperatures. The kit includes all necessary mounting hardware for a straightforward installation.

• Washable and reusable oil-free synthetic DryFlow filter media
• Oversized oval filter design for increased surface area and airflow
• Integrated heat shield utilizes factory engine cover for a thermal seal
• Up to 100,000 miles between cleanings depending on conditions
• Backed by AEM's Lifetime Limited Warranty
• Manufacturer Part Number: 21-807C

Fits select 2013-2025 Lexus GS350, IS250, IS350, and RC350 (V6-3.5L).

The AEM 21-806C Performance Cold Air Intake System is engineered to improve throttle response and engine sound by replacing the restrictive factory air box and paper filter. This system is designed, tuned, and dyno-tested to provide a more direct path for airflow, utilizing mandrel-bent aluminum tubing for smooth, unrestricted delivery. The durable gunmetal gray powder-coated finish provides a clean look under the hood while resisting corrosion.

At the heart of the system is an oversized AEM Dryflow synthetic air filter. This oil-free, tapered cylinder filter offers exceptional filtration and can go up to 100,000 miles before cleaning is required, depending on driving conditions. To ensure the engine breathes the coolest air possible, a custom-fit heat shield is included to isolate the filter from engine bay heat. This system is designed to accommodate factory emissions equipment, including the mass air flow (MAF) sensor and PCV hose.

• Direct bolt-on installation using factory mounting points
• Mandrel-bent aluminum tubing with gunmetal gray powder-coated finish
• Oil-free AEM Dryflow synthetic media filter for easy maintenance
• Vehicle-specific heat shield included to reduce intake temperatures
• Retains factory mass air flow sensor and PCV connections
• AEM Lifetime Limited Warranty
• Manufacturer Part Number: 21-806C