Fits 2017-2019 Chevrolet Cruze L, LS, LT, and Premier (L4-1.4L).

The AEM 21-805C Performance Cold Air Intake System is engineered to improve throttle response and engine sound by replacing the restrictive factory air box and intake tract. This system features a mandrel-bent aluminum intake tube finished in a durable gunmetal gray powder coat for optimized airflow and a professional engine bay appearance. To maintain lower intake air temperatures, the system includes a custom-engineered heat shield that isolates the filter from engine heat.

At the heart of this intake is an oversized AEM Dryflow synthetic air filter. This oil-free, washable media provides exceptional filtration and can go up to 100,000 miles between cleanings under normal highway driving conditions. The system is designed to accommodate all factory emissions control devices, including the mass air flow (MAF) sensor, ensuring a straightforward installation with standard hand tools.

• Manufacturer Part Number: 21-805C
• Tubing Material: Mandrel-bent aluminum
• Finish: Gunmetal gray powder coat
• Filter Type: AEM Dryflow (oil-free, synthetic)
• Hardware: Includes heat shield and all necessary mounting hardware
• Warranty: AEM Lifetime Limited Warranty

Fits 2016-2022 Chevrolet Malibu LT and Premier models equipped with the 2.0T engine.

The AEM 21-803C Performance Cold Air Intake System is engineered to reduce intake restriction and improve throttle response by replacing the factory air box and paper filter. This system features a mandrel-bent aluminum intake tube with a durable gunmetal gray powder-coated finish, designed to maintain smooth, laminar airflow to the turbocharger. The included heat shield installs into the original air box space to help isolate the intake air from engine bay heat.

The system utilizes an oversized AEM Dryflow synthetic air filter, which offers high-capacity filtration and airflow without the need for oiling. This oil-free design simplifies maintenance and ensures the mass airflow (MAF) sensor remains uncontaminated. This intake is a direct-fit upgrade that accommodates all factory emissions control devices, including the MAF sensor and PCV lines.

• Manufacturer Part Number: 21-803C
• Tube Material: Mandrel-bent aluminum
• Finish: Gunmetal gray powder coat
• Filter Type: Washable, oil-free Dryflow synthetic media
• Maintenance Interval: Up to 100,000 miles before cleaning (depending on driving conditions)
• Installation: Bolt-on design using commonly available tools
• Warranty: AEM Lifetime Limited Warranty

Notice: This intake system is not legal for sale or use in California or other states adopting California emission standards.

Fits select 2015-2026 Audi A3, Q3, S3 and Volkswagen Arteon, Golf, GTI, and Jetta GLI models (L4-2.0L).

The AEM 21-802C Cold Air Intake System is engineered to increase horsepower and torque by replacing the restrictive factory airbox and filter. This system features a mandrel-bent aluminum intake tube finished in silver, designed to provide a smooth, low-restriction path for airflow. By relocating the air filter, the system draws in cooler, oxygen-dense air to optimize the combustion process for improved throttle response and engine sound.

This intake includes an oversized AEM Dryflow synthetic washable air filter. The oil-free media provides excellent filtration and airflow efficiency while remaining easy to clean and reuse. This kit comes complete with all necessary hardware for installation and is backed by the AEM Lifetime Limited Warranty.

• Silver mandrel-bent aluminum intake tube reduces restriction and manages intake temperatures
• Includes oversized AEM Dryflow washable, oil-free synthetic air filter
• Direct replacement for factory airbox and filter assembly
• Includes all required mounting hardware
• Manufacturer Part Number: 21-802C
• Not legal for sale or use in California or states adopting California emission standards

Fits 2016-2022 Honda HR-V EX, EX-L, LX, Sport, and Touring models (L4-1.8L).

The AEM 21-800C Performance Cold Air Intake System is engineered to replace the restrictive factory air box and filter, providing a smoother, more direct path for air to reach your engine. By relocating the air filter to the front of the vehicle, the system draws in cooler, denser air to improve throttle response and increase horsepower and torque across the RPM range. The intake tubing is constructed from mandrel-bent aluminum for maximum flow and finished with a durable gunmetal gray powder coating for a clean engine bay aesthetic.

This system features an oversized AEM Dryflow synthetic air filter, providing exceptional filtration without the maintenance requirements of oiled filters. It is designed to integrate seamlessly with your Honda's factory emissions control devices, including the mass air flow (MAF) sensor and crankcase breather hose.

• Specifically tuned for 2016-2022 Honda HR-V 1.8L engines
• Mandrel-bent aluminum intake tube with gunmetal gray finish
• Washable, reusable, oil-free Dryflow synthetic filter media
• Up to 100,000 miles between filter cleanings under normal conditions
• Easy installation using common hand tools
• Includes all necessary mounting hardware
• Manufacturer Part Number: 21-800C
• Backed by AEM's Lifetime Limited Warranty

Fits select 1999-2007 Cadillac Escalade, Chevrolet Silverado/Suburban/Tahoe/Avalanche, and GMC Sierra/Yukon (6.0L).

The AEM 21-8000DC Brute Force Performance Cold Air Intake System is engineered to increase horsepower and torque by replacing the restrictive factory intake with a high-flow, mandrel-bent aluminum system. The intake tubing features a durable gunmetal gray powder-coated finish and is designed to accommodate factory emissions control devices, including the mass air flow (MAF) sensor.

This system utilizes an oversized AEM Dryflow synthetic air filter, which provides exceptional filtration and airflow without the need for oil. The filter is protected by a custom-designed heat shield that lowers intake air temperatures by isolating the filter from engine bay heat. Built for longevity, the Dryflow media can go up to 100,000 miles before cleaning is required, depending on driving conditions.

• Replaces restrictive factory air box and intake tubing
• Mandrel-bent aluminum construction with gunmetal gray powder coat
• Oil-free Dryflow synthetic washable air filter for easy maintenance
• Includes heat shield to reduce intake air temperatures
• Developed to retain factory emissions and MAF sensor mounting
• Manufacturer Part Number: 21-8000DC
• Backed by AEM's Lifetime Limited Warranty

Fits select 2016-2018 Volkswagen Jetta models (L4-1.4L).

The AEM 21-797C Performance Cold Air Intake System is engineered to improve throttle response and engine sound by replacing the restrictive factory air box and paper filter. This system features a mandrel-bent aluminum intake tube with a durable gunmetal gray powder-coated finish for a clean under-hood appearance and long-lasting protection against corrosion.

At the heart of this kit is an oversized AEM Dryflow synthetic air filter. This oil-free, washable media provides excellent filtration and can go up to 100,000 miles before servicing is required, depending on driving conditions. The included heat shield is designed to block radiant heat from the engine bay, ensuring cooler, denser air reaches the intake for better performance. The 21-797C is designed for a direct-fit installation using common tools, mounting to factory points, and accommodating original emissions control devices including the breather hose.

• Mandrel-bent aluminum tube with gunmetal gray powder-coated finish
• Oil-free, washable AEM Dryflow synthetic air filter for low-maintenance performance
• Custom-designed heat shield to reduce intake air temperatures
• Replaces factory air box and restrictive intake housing
• Compatible with factory emissions equipment and breather hoses
• Backed by an AEM Lifetime Limited Warranty
• Manufacturer Part Number: 21-797C

Fits 2015-2016 Hyundai Genesis 3.8 models.

The AEM 21-796C Performance Cold Air Intake System is engineered to increase horsepower and torque by replacing the restrictive factory air filter and intake housing. This system features mandrel-bent aluminum tubing with a durable gunmetal gray powder-coated finish, designed to maintain high-velocity airflow while integrating seamlessly with the engine's factory emissions control devices, including the pressure sensor and vent tubes.

At the heart of the system is an oversized AEM Dryflow synthetic air filter. This oil-free media provides exceptional filtration and can go up to 100,000 miles before cleaning is required, depending on driving conditions. The filter is protected by a dedicated heat shield to lower intake air temperatures, ensuring your 3.8L engine receives a denser, cooler air charge for improved combustion efficiency.

• Direct Fit: Designed, tuned, and dyno-tested specifically for the 2015-2016 Hyundai Genesis 3.8L.
• Premium Construction: Mandrel-bent aluminum intake tube with a gunmetal gray powder-coated finish.
• Dryflow Technology: Washable, reusable synthetic filter media preserves airflow and requires no oil.
• Maintenance: Up to 100,000 miles between filter cleanings under normal driving conditions.
• Installation: Bolt-on design uses commonly available tools; no custom fabrication required.
• MPN: 21-796C
• Warranty: Backed by AEM's Lifetime Limited Warranty.

Fits select 2016-2025 Honda Pilot, Ridgeline, and Passport models (V6-3.5L).

The AEM 21-795C Performance Cold Air Intake System is engineered to reduce intake restriction and lower intake air temperatures (IAT) by replacing the restrictive factory air box and paper filter. This system features a mandrel-bent aluminum intake tube with a durable gunmetal gray powder-coated finish, ensuring smooth, laminar airflow to the throttle body. By positioning the oversized AEM Dryflow synthetic filter within the original air box location and isolating it with a custom-fit heat shield, this intake helps provide a cooler, denser oxygen charge for improved throttle response and power gains.

The included tapered cylinder Dryflow filter utilizes an oil-free synthetic media, offering excellent filtration efficiency while remaining washable and reusable for up to 100,000 miles between cleanings. Designed for a straightforward installation, the 21-795C accommodates all factory emissions equipment, including the mass air flow (MAF) sensor and engine vent tube, requiring only common hand tools for a complete bolt-on upgrade.

• Finish: Gunmetal Gray powder-coated aluminum
• Tubing: Mandrel-bent for optimized airflow
• Filter: Oil-free, washable synthetic Dryflow media
• Service Interval: Up to 100,000 miles before cleaning required (depending on driving conditions)
• Warranty: AEM Lifetime Limited Warranty
• MPN: 21-795C

Fits 2016-2023 Nissan Maxima models equipped with the 3.5L engine.

The AEM 21-793C Performance Cold Air Intake System is engineered to increase horsepower and torque by replacing the restrictive factory air filter and intake housing. This system features a mandrel-bent aluminum intake tube with a durable gunmetal gray powder-coated finish, ensuring smooth airflow and a professional under-hood appearance. To combat power-robbing engine heat, a custom-designed heat shield is included to isolate the air filter from high engine bay temperatures.

At the heart of this system is an oversized AEM Dryflow synthetic air filter. This oil-free, washable media provides exceptional filtration and can go up to 100,000 miles between cleanings under normal driving conditions. The system is designed to accommodate factory emissions equipment, including the mass air flow (MAF) sensor and engine vent hose, for a straightforward bolt-on installation.

• Direct fit for 2016-2023 Nissan Maxima 3.5L
• Mandrel-bent aluminum tube with gunmetal gray powder coat
• Oil-free, washable AEM Dryflow synthetic air filter
• Includes custom heat shield to reduce intake air temperatures
• Maintains factory emissions control devices and MAF sensor location
• Manufacturer Part Number: 21-793C
• Backed by AEM's Lifetime Limited Warranty

Fits 2016-2021 Honda Civic EX, LX, LX-P, and Sport models equipped with the 2.0L L4 engine.

Unlock horsepower and torque gains in your tenth-generation Civic with the AEM 21-792C Performance Cold Air Intake System. This system replaces the restrictive factory air box and paper filter with a high-flow, mandrel-bent aluminum intake tube and an oversized AEM Dryflow synthetic filter. Engineered and dyno-tested specifically for the 2.0L engine, this intake is designed to improve throttle response and engine sound while maintaining factory emissions control device compatibility, including the mass air flow (MAF) sensor and engine vent line.

The system features a durable gunmetal gray powder-coated finish and includes a vehicle-specific heat shield to isolate the filter from engine bay heat, ensuring cooler, denser air enters the combustion chamber. The included tapered cylinder Dryflow filter is oil-free and washable, capable of going up to 100,000 miles between cleanings depending on driving conditions.

• Manufacturer Part Number: 21-792C
• Material: Mandrel-bent aluminum with Gunmetal Gray powder coat
• Filter Type: Oil-free AEM Dryflow synthetic washable media
• Installation: Bolts to factory mounting points with common hand tools
• Fitment Note: Does not fit Type R models
• Warranty: AEM Lifetime Limited Warranty

Fits 2016-2025 Lexus IS200t and IS300 models equipped with the L4-2.0L engine.

The AEM 21-791C Performance Cold Air Intake System is engineered to increase horsepower and torque by replacing the restrictive factory air filter and intake housing. This system features a mandrel-bent aluminum intake tube with a durable gunmetal gray powder-coated finish, ensuring smooth airflow and a professional engine bay appearance. Designed and dyno-tested for the Lexus 2.0L turbocharged engine, it utilizes the original air box location while incorporating a custom heat shield to isolate the intake from engine heat.

Included is an oversized AEM Dryflow synthetic air filter. This oil-free, washable media provides exceptional filtration and can last up to 100,000 miles between cleanings under normal driving conditions. The system is designed to accommodate factory emissions control devices, including the valve cover breather hose, for a straightforward, bolt-on installation.

• MPN: 21-791C
• Material: Mandrel-bent aluminum
• Finish: Gunmetal Gray powder coat
• Filter Type: Oil-free Dryflow synthetic
• Fitment: 2016-2025 Lexus IS200t/IS300 (L4-2.0L)
• Warranty: AEM Lifetime Limited Warranty

Fits 2012-2020 Chevrolet Sonic models (1.4L).

The AEM 21-788C Performance Cold Air Intake System is engineered to improve horsepower and torque by replacing the restrictive factory air filter and intake housing. This system features a mandrel-bent aluminum intake tube with a durable gunmetal gray powder-coated finish, designed to maintain smooth, laminar airflow into the engine. It utilizes an oversized AEM Dryflow synthetic air filter, located in the original air box space and protected by a heat shield to reduce intake air temperatures.

The oil-free Dryflow filter media offers excellent filtration and can be used for up to 100,000 miles before cleaning is required. This intake system is developed to integrate seamlessly with the vehicle's factory emissions control devices, including the mass air flow (MAF) sensor. It is a direct bolt-on upgrade that installs with common hand tools.

• Manufacturer Part Number: 21-788C
• Tube Material: Mandrel-bent aluminum
• Finish: Gunmetal gray powder coat
• Filter Type: Oil-free, washable synthetic Dryflow
• Service Interval: Up to 100,000 miles before cleaning
• Warranty: AEM Lifetime Limited Warranty

Fits select 2016-2022 Mazda MX-5 Miata and MX-5 Miata RF models (L4-2.0L).

The AEM 21-786C Performance Cold Air Intake System is engineered to increase horsepower and torque by replacing the restrictive factory air box and paper filter. This system features mandrel-bent aluminum intake tubing with a durable gunmetal gray powder-coated finish, designed to maintain smooth, laminar airflow into the engine. To ensure a precision fit within the compact ND Miata engine bay, this kit includes a custom-designed aluminum coolant overflow reservoir that replaces the bulky factory plastic unit.

At the heart of this system is an oversized AEM Dryflow synthetic air filter. This oil-free, washable media provides excellent filtration efficiency and can go up to 100,000 miles before cleaning is required, depending on driving conditions. The filter is protected by a dedicated heat shield designed to isolate the intake air from radiant engine bay heat, helping to maintain lower intake air temperatures (IATs) for more consistent performance.

• Tubing: Mandrel-bent aluminum with gunmetal gray powder-coated finish
• Filter Type: Tapered cylinder AEM Dryflow (oil-free synthetic)
• Maintenance: Washable filter media; up to 100,000-mile service interval
• Included Components: Replacement aluminum coolant reservoir and heat shield
• Integration: Accommodates factory MAF sensor and PCV hose connections
• Manufacturer Part Number: 21-786C
• Warranty: AEM Lifetime Limited Warranty

Fits 2016-2019 Acura ILX (2.4L).

The AEM 21-784C Performance Cold Air Intake System is engineered to increase horsepower and torque by replacing the restrictive factory air filter and intake housing. This system features a mandrel-bent aluminum intake tube finished in a durable gunmetal gray powder coat, providing a smooth path for airflow. It is specifically designed to accommodate factory emissions control devices, including the mass air flow (MAF) sensor and PCV hose, for a straightforward installation that maintains critical engine management parameters.

A primary feature of this kit is the oversized AEM Dryflow synthetic air filter. This oil-free, washable media provides high-efficiency filtration and can be used for up to 100,000 miles before servicing is required under normal highway driving conditions. The system also includes a custom-engineered heat shield that installs in the original air box location to protect the intake charge from high engine bay temperatures.

• Mandrel-bent aluminum intake tube with gunmetal gray powder-coated finish
• Oil-free, washable AEM Dryflow synthetic air filter for long-term performance
• Integrated heat shield reduces intake air temperatures (IATs)
• Maintains factory MAF sensor and PCV hose mounting points
• Easy installation using common hand tools
• Manufacturer Part Number: 21-784C
• Backed by AEM's Lifetime Limited Warranty

Fits 2016-2017 Hyundai Tucson Eco, Limited, Sport, and Value models (L4-1.6L).

The AEM 21-783C Performance Cold Air Intake System is engineered to increase horsepower and torque by replacing the restrictive factory air filter and intake housing. This system utilizes a mandrel-bent aluminum intake tube finished in a durable gunmetal gray powder coat, ensuring smooth, unrestricted airflow to the engine while maintaining a professional under-hood appearance.

This intake features an oversized AEM Dryflow synthetic air filter, providing high-efficiency filtration without the need for oil. The filter is positioned within the original air box location and protected by a custom-designed heat shield to reduce intake air temperatures. Designed for long-term reliability, the oil-free filter media can last up to 100,000 miles before cleaning is required, depending on driving conditions.

• Mandrel-bent aluminum intake tube with gunmetal gray powder-coated finish
• Oversized AEM Dryflow oil-free, washable synthetic air filter
• Custom heat shield helps isolate the air charge from engine heat
• Maintains factory emissions control devices, including EVAP and vent lines
• Simple bolt-on installation using standard hand tools
• Manufacturer Part Number: 21-783C
• Backed by AEM's Lifetime Limited Warranty

Fits 2014-2020 Mercedes-Benz CLA250 and GLA250 (L4-2.5L).

The AEM 21-781DS Performance Cold Air Intake System is engineered to deliver measurable horsepower and torque gains by eliminating the restrictions of the factory air filter and intake housing. This system utilizes the vehicle's factory fresh air inlets, routing air through custom replacement ducts into an aerodynamic, roto-molded AEM air box. Inside, an oversized Dryflow synthetic air filter provides exceptional filtration and airflow without the need for filter oil.

This intake is designed and dyno-tested for precise fitment and performance while maintaining full compatibility with factory emissions control devices and the ECU. The oil-free synthetic media is washable and reusable, capable of going up to 100,000 miles before cleaning is required depending on driving conditions.

• Increased Airflow: Aerodynamic roto-molded air box and ducts reduce intake restriction.
• Dryflow Technology: Oil-free synthetic filter media is easy to clean and maintains high efficiency.
• Direct Fit: Designed to bolt on using commonly available tools.
• Maintenance: Up to 100,000-mile service interval for the filter media.
• Warranty: Backed by the AEM Lifetime Limited Warranty.
• MPN: 21-781DS

Fits 2014-2021 Mazda 3, Mazda 6, and CX-5 (2.5L).

The AEM 21-779C Performance Cold Air Intake System is engineered to increase horsepower and torque by replacing your Mazda's restrictive factory air filter and intake housing. This system features a mandrel-bent aluminum intake tube finished in a durable gunmetal gray powder coat, designed to maintain smooth, laminar airflow into the engine. By utilizing a custom-fit heat shield, the system isolates the air intake from high engine bay temperatures, ensuring a cooler, denser oxygen charge for improved combustion efficiency.

At the heart of this system is the oversized AEM Dryflow synthetic air filter. This oil-free, washable media provides exceptional filtration and can go up to 100,000 miles between cleanings under normal driving conditions. The intake is designed to accommodate all factory emissions control devices, including the mass airflow (MAF) sensor and breather tube, for a straightforward installation that requires only common hand tools.

• Direct-fit for 2014-2021 Mazda 3, 6, and CX-5 2.5L models
• Mandrel-bent aluminum tube with gunmetal gray powder-coated finish
• Includes oil-free, washable AEM Dryflow synthetic air filter
• Custom heat shield reduces intake air temperatures
• Retains factory emissions equipment and MAF sensor
• Manufacturer Part Number: 21-779C
• Back by AEM's Lifetime Limited Warranty

Fits 2015-2017 Mitsubishi Lancer models including ES, Evolution GSR, GT, SE, and SEL (2.4L).

The AEM 21-778C Performance Cold Air Intake System is engineered to increase horsepower and torque by replacing the restrictive factory air housing. This system features a hybrid tube design: a mandrel-bent aluminum lower tube with a durable gunmetal gray powder coat finish and a roto-molded HDPE upper tube designed to insulate incoming air from engine bay heat. By relocating the oversized AEM Dryflow synthetic filter to the driver-side wheel well, the system draws in cooler, denser outside air for improved combustion efficiency.

Built for reliability and ease of maintenance, this intake accommodates factory emissions control devices, including the mass airflow (MAF) sensor and PCV hose. The included oil-free synthetic media allows for up to 100,000 miles of use between cleanings depending on driving conditions.

• Relocates air filter to driver-side wheel well to reduce intake air temperatures
• Mandrel-bent aluminum lower tube with gunmetal gray powder-coated finish
• Aerodynamically engineered HDPE upper tube for maximum heat insulation
• Washable, oil-free AEM Dryflow synthetic filter media for high filtration and flow
• Retains factory mass airflow sensor and PCV hose mounting points
• Manufacturer Part Number: 21-778C
• AEM Lifetime Limited Warranty

Fits 2014-2015 Infiniti Q50 (V6-3.7L) Base, Premium, and Sport models.

The AEM 21-774DS Performance Cold Air Intake System is engineered to unlock horsepower and torque gains by replacing restrictive factory air filters and intake housings. Specifically tuned and dyno-tested for the Infiniti Q50, this dual-intake system improves airflow while maintaining precise engine management compatibility.

Air is drawn through two AEM Dryflow synthetic, oil-free filters positioned in the original air box locations. These filters are protected by dedicated heat shields designed to lower intake air temperatures. Twin mandrel-bent intake tubes ensure smooth air delivery to the engine, accommodating factory mass air flow (MAF) sensors and crankcase ventilation. The synthetic media provides exceptional filtration and can last up to 100,000 miles before requiring service under normal driving conditions.

• Dual oil-free Dryflow synthetic filters for high-flow performance and easy maintenance
• Custom-designed heat shields to reduce intake air temperatures
• Maintains factory emissions equipment, including MAF sensors and PCV connections
• Simple installation with commonly available hand tools
• Manufacturer Part Number: 21-774DS
• Backed by AEM Lifetime Limited Warranty

Fits 2012-2016 Subaru Impreza, XV Crosstrek, and Crosstrek (H4-2.0L).

The AEM 21-772C Performance Cold Air Intake System is engineered to reduce intake restriction and heat soak by replacing the restrictive factory air box and paper filter. This system features a mandrel-bent aluminum intake tube finished in a durable gunmetal gray powder coat, ensuring smooth, laminar airflow directly to the engine's throttle body for improved throttle response.

At the heart of the system is an oversized AEM Dryflow synthetic air filter. This oil-free, washable media provides high-efficiency filtration and can perform for up to 100,000 miles between cleanings under normal highway driving conditions. The included heat shield is designed to isolate the filter from engine bay heat, allowing the engine to draw in cooler, denser outside air to improve combustion efficiency.

Designed as a direct bolt-on upgrade, this kit utilizes factory mounting points and is developed to accommodate the original mass airflow (MAF) sensor and engine emissions control devices.

• Mandrel-bent aluminum tube with gunmetal gray powder-coated finish
• Oil-free Dryflow synthetic washable air filter (tapered cylinder)
• Custom heat shield included to lower intake air temperatures
• Direct replacement for factory air box and intake housing
• Compatible with OE mass airflow sensor
• Manufacturer Part Number: 21-772C
• Backed by AEM's Lifetime Limited Warranty

Fits select 2014-2017 Volkswagen Jetta and Passat models (2.0L).

The AEM 21-764C Performance Cold Air Intake System is engineered to increase horsepower and torque by replacing the restrictive factory air box and filter assembly. This system features a mandrel-bent aluminum intake tube finished in a durable gunmetal gray powder coat, ensuring smooth, laminar airflow to the engine while maintaining a professional engine bay appearance. The system integrates directly with factory emissions control devices, including the PCV hose, for a precise fit.

Filtration is handled by an oversized AEM Dryflow synthetic air filter. This oil-free, tapered cylinder filter provides exceptional airflow and filtration efficiency without the need for re-oiling. Designed for long-term durability, the Dryflow media can perform for up to 100,000 miles before cleaning is required, depending on driving conditions. An included heat shield protects the filter from radiant engine heat, ensuring cooler, denser air enters the intake tract.

• Mandrel-bent aluminum intake tube with gunmetal gray powder coated finish
• Washable, reusable AEM Dryflow synthetic oil-free filter media
• Engineered for 2014-2017 Volkswagen Jetta and Passat 2.0L engines
• Includes heat shield to reduce intake air temperatures
• Straightforward installation using common hand tools
• Manufacturer Part Number: 21-764C
• Backed by AEM's Lifetime Limited Warranty

Fits 2010-2017 Volkswagen Jetta and Tiguan (2.0L).

The AEM 21-763C Performance Cold Air Intake System is engineered to increase horsepower and torque by replacing the restrictive factory air filter and intake housing. This system features mandrel-bent aluminum intake tubing finished in a durable gunmetal gray powder coat, ensuring smooth, laminar airflow to the engine. The intake is designed to accommodate factory emissions control devices, including the mass air flow (MAF) sensor and vacuum lines, for a precise fit and straightforward installation.

At the heart of this system is an oversized AEM Dryflow synthetic washable air filter. Its oil-free, tapered cylinder design provides high airflow and filtration efficiency without the need for re-oiling, lasting up to 100,000 miles between cleanings under normal driving conditions. A custom-designed heat shield is included to isolate the filter from engine heat, significantly reducing intake air temperatures for denser, more oxygen-rich air delivery.

• Replaces factory air box and filter for improved airflow
• Mandrel-bent aluminum tubing with gunmetal gray powder coated finish
• Oil-free Dryflow synthetic washable air filter for low maintenance
• Included heat shield helps reduce intake air temperatures
• Bolts on using commonly available tools
• Backed by AEM's Lifetime Limited Warranty
• MPN: 21-763C

Fits select 2014-2017 Lexus IS250 and IS350 (V6) models. This AEM 21-759C Performance Cold Air Intake System is designed to increase horsepower and torque by replacing the restrictive factory intake housing and filter with a high-flow, mandrel-bent aluminum induction system.

Constructed from mandrel-bent aluminum, the intake tubing ensures smooth, laminar airflow and features a durable gunmetal gray powder-coated finish. To protect the intake charge from engine bay heat, the system includes a specialized heat shield that mounts in the original air box location, helping to maintain lower intake air temperatures for more consistent performance. The system is engineered to integrate perfectly with factory emissions equipment, including the mass air flow (MAF) sensor and PCV hose.

At the heart of the system is an oversized AEM Dryflow synthetic air filter. This oil-free, tapered cylinder filter provides exceptional filtration while remaining washable and reusable. Designed for longevity, the filter media can go up to 100,000 miles before cleaning is required, depending on driving conditions.

• Manufacturer Part Number: 21-759C
• Tube Material: Mandrel-bent aluminum with gunmetal gray powder coat
• Filter Type: Oil-free AEM Dryflow synthetic media
• Maintenance: Washable and reusable; up to 100,000-mile cleaning interval
• Installation: Bolt-on design using commonly available tools
• Warranty: AEM Lifetime Limited Warranty

Fits 2013-2016 Audi A4 and A5 (2.0L).

The AEM 21-750 Performance Cold Air Intake System is engineered to increase horsepower and torque by replacing the restrictive factory air box and paper filter with a free-flowing, mandrel-bent intake tract. This system was precision-tuned and dyno-tested to ensure specific performance gains for Audi's 2.0L turbocharged engines while maintaining compatibility with the factory mass air flow (MAF) sensor and emissions equipment.

At the heart of this system is an oversized AEM Dryflow synthetic air filter. The tapered-cylinder design uses oil-free synthetic media, providing excellent filtration efficiency and high airflow without the need for re-oiling. The filter is housed in the original air box location and is protected by a custom-designed heat shield to keep intake temperatures low by isolating the filter from engine bay heat.

• Washable Dryflow Filter: Synthetic, oil-free media requires no oiling and can go up to 100,000 miles before cleaning is required.
• Bolt-On Installation: Designed to mount to factory points using commonly available hand tools.
• Heat Shield Included: Features an AEM-embossed heat shield to reduce heat soak and improve oxygen density.
• Direct Fit: Replaces manufacturer part number 21-750 and retains factory emissions control devices.
• Warranty: Backed by AEM's Lifetime Limited Warranty.

Fits select 2011-2014 Volkswagen Beetle, Golf, Jetta, and Passat (2.5L).

This AEM Cold Air Intake System is engineered to improve horsepower and torque by replacing the restrictive factory airbox with a high-flow induction system. By relocating the air filter outside the engine compartment, this system draws in cooler, denser air to optimize combustion efficiency and provide a more aggressive engine sound. The kit features a mandrel-bent aluminum intake tube to provide smooth, laminar airflow and minimize turbulence.

Included is an oversized AEM Dryflow synthetic air filter. This oil-free, washable media provides excellent filtration and simplifies maintenance while maintaining performance. All necessary high-quality hardware is included for a secure installation to factory mounting points.

• Mandrel-bent aluminum intake tube with durable finish
• Oversized, oil-free AEM Dryflow synthetic washable filter
• Designed to improve throttle response and engine sound
• Complete installation hardware included
• AEM Lifetime Limited Warranty
• Manufacturer Part Number: 21-733C

Emissions Note: This air intake cannot be sold in California and is not legal for use in California or other states adopting California emission standards.

Vehicle Fitment

Fits 2015-2020 Subaru WRX Base, Limited, and Premium (2.0L).

The AEM 21-732C Performance Cold Air Intake System is engineered to increase horsepower and torque by replacing the restrictive factory air box and intake housing. This system features high-quality mandrel-bent aluminum intake tubing finished in a durable gunmetal gray powder coat to optimize airflow and resist heat soak. A vehicle-specific heat shield is included to isolate the air filter from engine heat, ensuring cooler, denser air enters the induction system.

This intake utilizes an oversized AEM Dryflow synthetic air filter. The oil-free, washable media provides excellent filtration and airflow while simplifying maintenance, lasting up to 100,000 miles before cleaning is required depending on conditions. Designed for a direct-fit installation, the 21-732C accommodates all factory emissions control devices, including the mass air flow (MAF) sensor, and installs easily with common hand tools.

• Mandrel-bent aluminum tubing with gunmetal gray powder-coated finish
• Oil-free Dryflow synthetic washable air filter for high-performance filtration
• Integrated heat shield reduces intake air temperatures (IAT)
• Direct bolt-on design retains factory MAF sensor location
• AEM Lifetime Limited Warranty
• Manufacturer Part Number: 21-732C

Fits 2013-2016 Hyundai Genesis Coupe (3.8L).

The AEM 21-730C Performance Cold Air Intake System is engineered to increase horsepower and torque by replacing the restrictive factory air filter and intake housing. This system features mandrel-bent aluminum intake tubing with a durable gunmetal gray powder-coated finish, designed to provide a smooth, low-restriction path for airflow.

At the heart of the system is an oversized AEM Dryflow synthetic air filter. This oil-free, washable media provides excellent filtration and can go up to 100,000 miles between cleanings, depending on driving conditions. The filter is housed in the original air box location and protected by a custom heat shield with a fresh air adapter scoop to help keep intake temperatures low.

• Mandrel-bent aluminum intake tube with gunmetal gray powder coating
• Oil-free Dryflow synthetic washable air filter for easy maintenance
• Custom heat shield and fresh air adapter scoop included
• Retains factory emissions devices, air temperature sensor, and sound tube
• Complete installation hardware included
• Backed by AEM's Lifetime Limited Warranty
• Manufacturer Part Number: 21-730C

Fits select 2013-2014 Hyundai Genesis Coupe models (2.0L / 2.0T).

The AEM 21-728C Performance Cold Air Intake System is engineered to deliver measurable horsepower and torque gains by replacing the restrictive factory intake and air box with a high-flow induction system. This kit features mandrel-bent aluminum tubing with a durable gunmetal gray powder-coated finish, designed to maintain consistent internal diameters for smoother airflow. To further optimize performance, the system includes a heat shield and a replacement air scoop adapter designed to reduce intake air temperatures by drawing in cooler external air.

At the heart of this system is an oversized AEM Dryflow synthetic air filter. This oil-free, washable media provides exceptional filtration and airflow without the need for filter oil. It is designed to go up to 100,000 miles before cleaning is required, depending on driving conditions. The 21-728C is tuned specifically for the 2.0T engine and maintains compatibility with factory emissions control devices, including the mass air flow (MAF) sensor.

• Mandrel-bent aluminum intake tubing with gunmetal gray powder-coat finish
• Oil-free, washable AEM Dryflow synthetic air filter for simplified maintenance
• Integrated heat shield and air scoop adapter to lower intake air temperatures
• Retains factory emissions equipment and MAF sensor location
• AEM Lifetime Limited Warranty
• Manufacturer Part Number: 21-728C

Fits 2011-2013 Mini Cooper Base, S, John Cooper Works, Clubman, Countryman, Roadster, and Coupe models (1.6L).

The AEM 21-721C Performance Cold Air Intake System is engineered to improve horsepower and torque by replacing the restrictive factory air box and filter. This system features a mandrel-bent aluminum intake tube with a durable black powder-coated finish, designed to maintain smooth, laminar airflow while accommodating factory emissions control devices like the mass air flow (MAF) sensor and vacuum line ports.

At the heart of the system is an oversized AEM Dryflow synthetic air filter. This oil-free, washable media provides high-efficiency filtration and can be used for up to 100,000 miles before servicing is required. The intake is housed in a replacement air box that integrates with the factory hood scoop to effectively lower intake air temperatures and optimize engine performance.

• Mandrel-bent aluminum tubing with a black powder-coated finish
• Oil-free AEM Dryflow synthetic washable air filter (MPN 21-721C)
• Integrated air box design utilizes factory hood scoop for cooler air charges
• Direct bolt-on installation using factory mounting points
• Retains factory MAF sensor and vacuum line connections
• Manufacturer Part Number: 21-721C

Fits 2007-2010 Mini Cooper S and 2010 Mini Cooper S Clubman (1.6L).

The AEM 21-699C Cold Air Intake System is engineered to reduce intake restriction and lower air temperatures to optimize performance on turbocharged Mini Cooper S models. This system replaces the restrictive factory air filter and intake housing with a free-flowing, mandrel-bent aluminum intake tube and an oversized AEM Dryflow synthetic filter. A standout feature of this kit is the replacement air box and integrated hood scoop adapter, specifically designed to draw cooler outside air directly into the intake tract to combat heat soak.

• Mandrel-bent aluminum intake tubing with a durable gunmetal gray powder-coated finish.
• Oil-free AEM Dryflow synthetic air filter allows for up to 100,000 miles of service before cleaning (depending on conditions).
• Direct bolt-on design accommodates factory emissions control devices, including the mass air flow (MAF) sensor.
• Includes a specialized heat shield and air box designed to utilize the functional factory hood scoop.
• Washable, reusable synthetic filter media maintains high filtration efficiency without the need for filter oil.
• Manufacturer Part Number: 21-699C
• Backed by AEM's Lifetime Limited Warranty.