Fits select 2015-2020 Chevrolet Colorado and 2007-2023 Toyota Tacoma and Tundra.

The Old Man Emu UCB17 Center Bolt and Nut is a critical component for leaf spring assembly, designed to keep the individual leaves of the spring pack aligned and properly secured. This high-strength hardware is essential when installing additional spring liners, trim packers, or when performing maintenance on your leaf pack where the original factory pin may be sheared or corroded.

• Designed for seamless integration with Old Man Emu suspension systems
• High-tensile strength construction to maintain clamping force during heavy suspension cycling
• Essential for securing leaf spring packs and preventing leaf migration
• Corrosion-resistant finish for long-term durability in off-road environments
• Includes one high-grade center bolt and matching nut
• Manufacturer Part Number: UCB17

Fits 2008-2021 Toyota Land Cruiser (Base and Heritage Edition).

The ARB Old Man Emu BP-51 Light Suspension Lift Kit brings professional racing bypass technology to the Toyota 200 Series Land Cruiser. These position-sensitive bypass shock absorbers feature a 51mm diameter bore and remote reservoirs, engineered to deliver exceptional chassis control and ride comfort without requiring permanent vehicle modifications. The internal bypass system provides significant end-zone damping to prevent bottoming out while maintaining a supple ride on washboard roads and highway pavement.

• 6061 T6 aluminum shock bodies and reservoirs for superior heat dissipation
• Type 3 40-micron hard anodized finish for maximum corrosion and stone damage resistance
• Independently adjustable rebound and compression for precise ride tuning
• Designed, tested, and manufactured in-house by ARB engineers in Australia
• Bolt-on installation using factory mounting points
• Accommodates additional vehicle weight for light-duty builds
• Manufacturer Part Number: OMELC08BP51L

Fits 2008-2021 Toyota Land Cruiser Base and Heritage Edition models.

The ARB Old Man Emu BP-51 (Bypass 51mm bore) suspension system brings race-proven internal bypass technology to the Toyota Land Cruiser 200 Series. Designed for drivers who demand both daily-driver comfort and high-speed off-road stability, these position-sensitive shock absorbers provide exceptional chassis control by increasing damping force at the ends of the stroke to prevent bottoming out while maintaining a plush ride in the mid-zone.

Built to handle the extra weight of armor, winches, and equipment, this heavy kit features bodies and remote reservoirs machined from 6061 T6 aluminum. The Type 3 40-micron hard-anodized finish ensures superior heat dissipation and corrosion resistance. Each shock is fully adjustable for both rebound and compression, allowing you to fine-tune the suspension to your specific vehicle load and terrain requirements.

• 51mm bore diameter with internal bypass technology
• Independent rebound and compression adjustment for custom tuning
• 6061 T6 aluminum body and reservoir for maximum thermal management
• Type 3 40-micron hard-anodized finish for stone and corrosion resistance
• Vehicle-specific, bolt-on design requiring no frame modifications
• Engineered for heavy-load applications and additional vehicle weight
• Manufacturer Part Number: OMELC08BP51H

Fits 2008-2021 Toyota Land Cruiser models (Base and Heritage Edition).

The ARB Old Man Emu BP-51 (Bypass 51mm bore) suspension kit brings race-inspired internal bypass technology to the Toyota Land Cruiser. These position-sensitive shocks provide a plush ride during normal driving while delivering significant end-zone damping to manage harsh terrain and heavy loads. Unlike traditional shocks, BP-51 absorbers allow for independent on-vehicle adjustment of both rebound and compression, enabling a custom tune to match your specific vehicle setup and weight.

Engineered for extreme durability, the shock bodies and remote reservoirs are CNC-machined from 6061 T6 aluminum with a Type 3, 40-micron hard-anodized finish. This ensures superior heat dissipation and maximum resistance to corrosion and stone damage. This kit includes heavy-duty Upper Control Arms (UCAs) to maintain proper alignment and suspension geometry, along with 6061 grade aluminum top hats.

• Bypass Technology: 51mm diameter bore with position-sensitive internal bypass for unparalleled ride control.
• Adjustable Damping: Independent on-vehicle adjustment for compression and rebound damping.
• Premium Construction: 6061 T6 aluminum shock body, reservoir, and components.
• Durable Finish: Type 3, 40-micron hard-anodized coating for heat management and impact resistance.
• Direct Fit: Designed to bolt onto factory mounting points without vehicle modifications.
• Complete Kit: Includes shock absorbers, remote reservoirs, upper control arms, and aluminum top hats.
• Part Number: LCBP51LP

Fits 2008-2021 Toyota Land Cruiser (Base and Heritage Edition).

The ARB Old Man Emu BP-51 (Bypass 51mm) Heavy Kit brings race-bred internal bypass technology to the Toyota 200-series chassis. Engineered specifically for vehicles equipped with heavy accessories like steel bumpers, winches, and drawer systems, these position-sensitive shock absorbers provide a refined ride during normal travel while delivering significant end-zone damping for maximum chassis control off-road. The internal bypass ports allow oil to bypass the piston at ride height for comfort, while the remote reservoir design increases oil capacity to prevent fade during high-intensity use.

Each BP-51 shock is constructed from 6061 T6 aluminum with a Type 3 40-micron hard-anodized finish, providing superior heat dissipation and resistance to corrosion and stone damage. This kit includes heavy-duty upper control arms to ensure proper alignment geometry and maximize wheel travel. Damping is easily adjustable for both rebound and compression, allowing you to custom-tune the suspension for specific loads and terrain.

• Manufacturer Part Number: LCBP51HP
• 51mm diameter bore with position-sensitive internal bypass technology
• 6061 T6 aluminum shock bodies, reservoirs, and components
• Type 3 40-micron hard-anodized finish for maximum durability
• 6061 grade aluminum top hats and remote reservoir mounting hardware included
• Independent, wide-range adjustment for rebound and compression damping
• Includes upper control arms (UCAs) to maintain factory-spec alignment
• Designed to bolt onto factory mounting points without vehicle modifications

The ARB Drawer Fridge Cable Guide (CABRUN) provides a professional cable management solution for off-road drawer systems, eliminating the risk of pinched, crushed, or frayed wiring. Featuring a 1000mm nylon cable track, this guide creates a protected, enclosed path that allows fridge or battery cables to move seamlessly with the sliding motion of the drawer without snagging on cargo or falling into the drawer cavity.

• Prevents 12V power cables from being damaged by fridge rollers or sharp contact points.
• Includes two black powder-coated steel brackets (S-bracket and flat bracket) for secure mounting and alignment.
• 1000mm total length can be trimmed to accommodate specific fridge sizes and drawer travel requirements.
• Compatible with ARB Roller Floor (RF), (RFH), and (RDRF) drawer modules of all sizes.
• Designed for use with standard automotive wiring and most portable fridge power leads.
• Allows for clean integration with side floor power outlets for a snag-free cargo area.

The ARB Winch Solenoid Pack Bracket (3500770) provides a robust mounting solution for relocating or securing the control box on Smittybilt Gen 2 X20 recovery systems. This bracket is specifically engineered for a precise fit with the 10,000 lb. capacity Smittybilt Gen 2 X20 winch (model 98510), ensuring the solenoid remains stable and accessible during heavy recovery operations.

By utilizing this dedicated bracket, installers can ensure proper clearance and a clean, professional finish for their winch setup. The bracket is constructed to withstand the vibration and environmental stress common in off-road and recovery environments.

• Specifically designed for Smittybilt Gen 2 X20 10,000 lb. winches
• Directly compatible with Smittybilt part number 98510
• Facilitates secure mounting of the winch solenoid pack
• Manufacturer Part Number: 3500770

Fits select 1966-2018 Ford Bronco and Jeep CJ, Cherokee, Comanche, Grand Cherokee, Liberty, Wagoneer, and Wrangler models with Dana 30 front axles (27-spline, 3.54 & numerically lower gear ratios).

The ARB RD101 Air Locker is the industry standard for selectable traction, allowing you to transition from an open differential for street driving to a 100% locked axle for technical off-roading with the flick of a switch. This pneumatically operated system prevents internal differential gears from rotating, ensuring both axle shafts turn at the same speed to maintain maximum traction in mud, rocks, or snow. The RD101 features a high-strength two-piece design with a patented timed locking mechanism for ultra-fast engagement and superior durability.

• Replaces factory open differential for 100% on-demand traction
• Steel-reinforced elastomer bonded annular seal handles extreme temperature fluctuations
• Minimal moving parts design ensures long-term trail reliability
• Forged gears provide maximum strength and durability under load
• Requires an on-board air compressor for operation (sold separately)
• Kit includes: ARB RD101 Air Locker, activation switch, solenoid valve, air line, and bulkhead fitting

Fits select 1986-1999 Suzuki Samurai, Sidekick, Vitara, Grand Vitara, and Geo Tracker with 10-bolt ring gears and 26-spline axles.

The ARB RD208 Air Locker provides 100% traction on demand, allowing you to transition from an open differential to a fully locked setup with the flip of a dash-mounted switch. This pneumatically operated system uses an internal locking mechanism to prevent axle shafts from turning independently, ensuring maximum torque is delivered to both wheels when you need it most. Unlike automatic lockers, the Air Locker maintains factory-style on-road drivability and handling when disengaged.

Engineered for extreme off-road use, the RD208 features a high-strength two-piece design with minimal moving parts for maximum reliability. The steel-reinforced, elastomer-bonded annular seal is built to withstand extreme temperature fluctuations, ensuring consistent performance in the harshest environments.

• Manufacturer Part Number: RD208
• Axle Spline Count: 26
• Ring Gear Bolts: 10
• Engagement: Instant pneumatic locking and unlocking
• Materials: Durable two-piece steel construction
• Included Hardware: Air Locker differential, activation switch, solenoid valve, air line, and bulkhead fitting
• Note: Requires an onboard air compressor for operation (sold separately)

Fits 2024-2026 Toyota Tacoma SR, SR5, Limited, TRD Sport, and TRD Off-Road (Non-Hybrid models only).

As modern engine bays become increasingly crowded, finding space for aftermarket air systems is a challenge. The ARB 3523060 mounting bracket provides a specific, engineered solution to integrate your ARB air compressor into the 2024+ Tacoma engine compartment. This bracket maximizes unused space while ensuring air couplings remain easily accessible for quick tire pressure adjustments or tool operation.

Built for off-road durability, the bracket features a rugged black powder coat finish to resist corrosion. It is a 100% bolt-on solution that utilizes factory mounting points, eliminating the need for drilling or custom fabrication. This system is designed to support ARB's most popular compressor models and the optional manifold kit for air locker integration.

• Compatible with ARB CKBLA12, CKBLTA12, CKMA12, and CKMTA12 compressors
• Supports ARB 171503 manifold kit
• 100% bolt-on installation using factory mounting points
• Durable black powder coat finish
• Provides easy access to air couplings under the hood
• Note: Does not suit hybrid models
• Manufacturer Part Number: 3523060

Ensure a secure and reliable power connection for your portable cooling setup with the ARB Threaded Socket Surface Mount (10900028). Engineered specifically to eliminate the risk of accidental power loss during off-road travel, this socket is the ideal interface for the ARB screw-in DC cord, providing a vibration-proof connection that standard 12V cigarette lighter sockets can't match.

The unit is supplied with a rugged ARB-designed surface mount housing that allows for professional installation on any flat interior surface. For maximum versatility in tight spaces, the housing features wire entry cut-outs in three distinct locations. To ensure long-term durability in outdoor or overlanding environments, it includes an integrated O-ring seal to reduce water ingress and a dedicated internal path to minimize condensation buildup.

• Specifically designed for ARB Fridge Freezer screw-in DC power cords
• Includes ARB-branded surface mount housing for clean installation
• Three wire entry cut-out locations for flexible cable routing
• Integrated O-ring seal provides protection against moisture and water ingress
• Internal design reduces condensation to protect electrical contacts
• Manufacturer Part Number: 10900028

The ARB ARB506A Air Pressure Gauge provides the precision required for accurately adjusting tire pressures to suit varied off-road terrain. Designed for durability in the field, this gauge features a flexible hose and a dual chuck that accommodates all rim and valve types, ensuring a secure fit even in cramped wheel designs.

The analog dial features high-contrast dual pressure scales in both PSI and Bar for easy reading in low-light conditions. To handle the rigors of trail use, the gauge is encased in a protective rubber guard, while a dedicated reset button allows for quick, consecutive measurements without disconnecting the hose from the valve stem.

• Flexible hose for easier access to valve stems on complex wheels
• Dual chuck design compatible with all rim and valve configurations
• Easy-to-read dual pressure scales displaying both PSI and Bar
• Rugged rubber gauge guard protects against drops and impacts
• Manual gauge reset button for rapid measurements
• Compact small dial design for convenient glovebox storage
• Manufacturer Part Number: ARB506A

Fits 2005-2008 Nissan Frontier and 2005-2007 Nissan Pathfinder models.

The ARB Deluxe Bumper provides a fully engineered protection system that replaces the factory bumper, specifically designed to handle the rigors of remote area travel. Unlike traditional brush guards, this bumper utilizes a multi-fold upswept and tapered wing design to improve approach angles and structural integrity. The split-pan design ensures the vehicle's cooling system receives maximum airflow while maintaining a high-strength mounting base for recovery operations.

Constructed from heavy-duty steel with a black powder coat finish, this bumper is winch-compatible and includes twin Hi-Lift jacking points. It also features durable urethane buffers and extensive under-protection panels to shield vital drivetrain components from trail debris.

• Compatible with most electric low-mount winches up to 10,000 lb capacity
• Durable steel construction with a textured black powder coat finish
• Multi-fold upswept and tapered wing design for optimized off-road clearance
• Integrated twin Hi-Lift jacking points and provisions for driving lights
• Split pan design for maximum strength and radiator airflow
• Requires ARB fog light loom 3500440 (Halogen) or 3500520 (LED) for optional light kits
• Hawse fairlead spacer kit 3500600 required when fitting hawse fairleads
• Manufacturer Part Number: 3438260B

Fits 2005-2023 Toyota Tacoma models including SR, SR5, TRD Off-Road, TRD Pro, TRD Sport, and Limited. This kit is designed for vehicles with light to medium accessory loads.

The ARB Old Man Emu BP-51 (Bypass 51mm) suspension system brings race-proven bypass technology to your daily driver. These position-sensitive shock absorbers feature internal bypass channels that deliver a plush ride during normal cruising while providing significant end-zone damping to prevent bottoming out during aggressive off-road use. Each shock is independently adjustable for both rebound and compression, allowing you to fine-tune the damping to match your specific vehicle setup and terrain.

• Internal Bypass Technology: 51mm diameter bore with position-sensitive damping for exceptional chassis control.
• Adjustable Damping: External clickers allow for independent tuning of rebound and compression levels.
• Heat Management: Remote reservoirs increase oil capacity and utilize 6061 T6 aluminum construction for superior heat dissipation.
• Durable Finish: Type 3 40-micron hard anodized coating provides maximum corrosion and stone damage resistance.
• Complete Kit: Includes high-quality upper control arms (UCAs) and 6061 grade aluminum top hats for correct geometry and simplified installation.
• Direct Fit: Engineered to bolt onto factory mounting points without requiring permanent vehicle modifications.

Manufactured in-house by ARB, the BP-51 kit (MPN: TACBP51P) is extensively tested in the Australian Outback to ensure it meets the highest standards of durability and performance for Tacoma owners who demand more from their suspension.

Fits 2005-2023 Toyota Tacoma models including TRD Pro, TRD Off-Road, SR5, and Limited.

The Old Man Emu BP-51 (Bypass 51mm) suspension kit brings race-bred bypass technology to the Toyota Tacoma. These position-sensitive dampers utilize internal bypass passages to provide a plush ride during normal travel while increasing damping force at the ends of the stroke to prevent bottoming out. This "heavy" kit is specifically tuned to handle additional vehicle weight from accessories like bumpers, winches, or bed racks.

Each shock features independent, tool-free adjustment for both rebound and compression, allowing you to fine-tune the ride for varying loads or terrain. The shock bodies and remote reservoirs are CNC-machined from 6061-T6 aluminum with a Type 3 40-micron hard-anodized finish for superior heat dissipation and corrosion resistance. This kit includes the necessary Upper Control Arms (UCAs) to maintain proper alignment and suspension geometry after lifting.

• Bore Diameter: 51mm internal bypass bore for high-flow damping
• Adjustment: Independent 10-stage compression and rebound tuning
• Construction: 6061-T6 aluminum body and reservoir for maximum cooling
• Finish: Type 3 40-micron hard anodized for stone and corrosion resistance
• Components: Includes coilovers, rear shocks, reservoirs, and Upper Control Arms
• Installation: Bolt-on design with 6061 grade aluminum top hats
• MPN: TACBP51HP

Fits 2005-2023 Toyota Tacoma models including Base, Pre Runner, TRD Pro, TRD Off-Road, SR5, and Limited. This Old Man Emu BP-51 (Bypass 51mm diameter bore) suspension kit brings race-proven bypass technology to your daily driver or overlanding rig. Developed and tested in the Australian Outback, these position-sensitive shocks provide a bolt-on solution that delivers plush street comfort without sacrificing the high-velocity damping required for aggressive off-road handling.

The BP-51 series features independent adjustability for both rebound and compression, allowing you to fine-tune your suspension to accommodate varying vehicle loads, aftermarket armor, or specific terrain requirements. The remote reservoir design ensures increased oil capacity and cooling efficiency, preventing shock fade during extended corrugated washboard runs or technical descents.

• Construction: 6061 T6 aluminum shock body and reservoir for superior heat dissipation
• Finish: Type 3 40-micron hard anodized coating for maximum corrosion and stone chip resistance
• Bore Size: 51mm large-bore internal bypass design
• Adjustability: Independent tool-free compression and rebound damping adjustment
• Installation: Vehicle-specific mounting brackets included for a true bolt-on fitment
• Manufacturer Part Number: OMETAC16BP51B

This kit is designed to manage additional vehicle weight from steel bumpers, winches, or bed racks while maintaining exceptional chassis control and end-zone damping to prevent bottoming out.

Fits 2003-2004 Land Rover Discovery HSE, S, and SE models.

The ARB Deluxe Bumper is a fully engineered front protection system designed for remote travel and demanding off-road recovery. Unlike standard brush guards, this bumper utilizes a comprehensive mounting system that completely replaces the factory unit, providing superior vehicle integration and structural integrity. The multi-fold upswept and tapered wing design provides improved approach angles for navigating technical terrain, while the split pan design ensures maximum airflow to the cooling system.

Fabricated from durable steel with a black powder coat finish, this bumper includes twin Hi-Lift jacking points and extensive under-protection panels. It is designed to accommodate most electric low-mount winches up to 10,000 lb capacity and retains compatibility with original equipment (OE) fog lights for a factory-integrated look.

• Manufacturer Part Number: 3432120B
• Durable steel construction with a textured black powder coat finish
• Multi-fold upswept and tapered wing design for optimal ground clearance
• Twin Hi-Lift jacking points for secure recovery operations
• Provision for driving lights and compatible with factory OE fog lights
• Integrated durable urethane buffers
• Requires Hawse fairlead spacer kit (part 3500600) when fitting a hawse fairlead
• Compatible with most electric low-mount winches up to 10,000 lb capacity

The ARB Intensity SOLIS 36 kit represents a significant evolution in auxiliary lighting, offering a refined color temperature that reduces eye strain and fatigue during extended night driving. This hybrid lighting solution includes one spot and one flood light, combining 1,032m of long-distance projection with 729m of wide-angle peripheral illumination.

Built for the most demanding environments, these lights feature a high-pressure die-cast aluminum body and a UV-stable polycarbonate lens. The system is managed by advanced active-thermal electronics to maintain peak output and protect the 36 Osram LEDs. Each kit includes a dedicated wiring loom and security hardware for a complete, professional installation.

• Manufacturer Part Number: SJB36SFKIT
• LED Configuration: 36 Osram LEDs (6x10W and 30x4W)
• Output: 18,178 Raw Lumens per pair
• Distance at 1 Lux: 1,032m (Spot) / 729m (Flood)
• Protection Rating: Dust and waterproof to IP69
• Power Consumption: 165W total with 12.4A draw @ 13.2V
• Construction: UV-stable powder-coated aluminum body and molded lens cover
• Compliance: RoHS compliant and protected against RFI/EMC interference
• Hardware: Included security TORX fasteners and wiring loom

The ARB Intensity SOLIS 36 (SJB36FKIT) is a high-performance lighting solution designed to reduce eye strain and driver fatigue on long expeditions. By refining the LED color temperature and utilizing high-grade optics, this flood kit delivers a broad, crisp light pattern that provides exceptional peripheral visibility. The kit includes two driving lights and a dedicated wiring loom for a complete installation.

Built for the most demanding environments, the SOLIS 36 features a high-pressure die-cast aluminum body and mount with a UV-stable powder coat finish. ARB's active thermal management system protects the 36 Osram LEDs from overheating, ensuring consistent output and longevity. Each light is rated IP69 for maximum protection against dust and high-pressure water ingress.

• 36 Osram LEDs: 6x10W and 30x4W configuration
• Raw Lumens: 18,178 LM
• Beam Distance (1 Lux): 729m (Single Flood) / 1032m (Spot reference)
• Power Draw: 165W total (12.4 Amps @ 13.2V)
• Ingress Protection: IP69 (Dust and Waterproof)
• Housing: High-pressure die-cast aluminum with UV-stable powder coat
• Lens: UV-stable molded polycarbonate lens cover
• Compliance: RoHS compliant and RFI/EMC interference protected
• Hardware: Security TORX hardware included

The ARB Intensity SOLIS 21 LED Light Kit provides a versatile lighting solution for off-roaders, pairing one spot beam and one flood beam to handle both long-distance visibility and wide-field illumination. Each light features six 5W LEDs and a refined color temperature designed to reduce eye strain and driver fatigue during extended night driving. The kit is managed by a digitally controlled touchpad that allows for precise brightness adjustment to suit changing trail conditions.

Built for the harshest environments, these lights feature virtually indestructible clear-coated polycarbonate lenses and a rugged housing that is dust and waterproof to IP68 standards, capable of submersion up to three meters. The SJB21SFKIT includes a complete loom wiring kit for a straightforward installation, along with security TORX hardware to protect your investment.

• Includes 1 spot light, 1 flood light, and a dedicated wiring loom
• 6 x 5W high-output LEDs per light
• Digitally controlled touchpad for five-stage dimming
• IP68 rated: Dustproof and submersible to 3 meters
• Virtually indestructible clear-coated polycarbonate internal lens
• Built-in digital LED driver control
• Interchangeable red and black bezels included
• Security TORX hardware for theft deterrence
• Manufacturer Part Number: SJB21SFKIT

The ARB Intensity SOLIS 21 Flood Kit provides a complete high-performance lighting solution for off-road navigation. This kit includes two Intensity SOLIS 21 flood lights and a dedicated wiring loom for a clean, professional installation. Designed to reduce driver fatigue, these lights feature a refined color temperature that minimizes eye strain during extended night driving.

Built for the harshest environments, the SOLIS 21 units utilize a digitally controlled touchpad for output management and a built-in digital LED driver. The virtually indestructible clear-coated polycarbonate internal lenses are protected by a rugged housing rated to IP68 for dust and water ingress, remaining submersible to three meters. Each light features 21 LEDs (15 x 4W) and comes with interchangeable red and black bezels to customize the look of your vehicle.

• Manufacturer Part Number: SJB21FKIT
• Includes two SOLIS 21 flood lights and full wiring loom
• Digitally controlled touchpad for beam adjustment
• 21 high-output LEDs per light (15 x 4W configuration)
• IP68 rated: Dustproof and waterproof (submersible to 3m)
• Virtually indestructible clear-coated polycarbonate internal lens
• Security TORX hardware included for theft deterrence
• Interchangeable red and black bezels included

Ensure your cargo management system operates safely and reliably with these ARB Outback Solutions roller drawer stops. Designed as a direct component of the completely modular Outback Solutions range, these stops are essential for maintaining the travel limits of your drawer modules in SUVs, pick-ups, trailers, or industrial applications like warehouses and sheds.

• Vehicle Compatibility: Fits various applications including SUVs, pick-ups, and trailers equipped with ARB Outback Solutions drawer systems.
• Complete Set: Includes two stops to service both the left-hand and right-hand sides of a single drawer module.
• Durable Construction: Engineered to withstand the rigors of off-road use and heavy cargo loads.
• System Integration: Part of a modular system offering over 200 possible configurations.
• Warranty: Backed by a three-year manufacturer warranty.
• Part Number: RDSTP

Fits 2022-2025 Toyota Tundra (SR, SR5, Limited, Platinum, 1794 Edition, and Capstone).

The ARB Zenith Front Bumper Bash Plate and Fitting Kit is a vehicle-specific mounting solution engineered to secure an ARB front bumper directly to the vehicle chassis. This kit is designed to bridge the gap between heavy-duty off-road protection and modern vehicle technology, ensuring a precise fit that respects the structural requirements of the 2022-2025 Toyota Tundra platform.

Built for more than just aesthetics, this fitting kit is specially developed to maintain full compatibility with the Tundra's factory safety systems, including sensor arrays and airbag deployment timing. The included bash plate adds a layer of underbody protection, shielding critical components during off-road traversal while providing a clean, integrated look for the Zenith bumper system.

• Vehicle-specific design ensures direct-to-chassis mounting and structural integrity
• Fully compatible with Toyota factory safety systems and sensors
• Includes all high-grade hardware required for bumper and bash plate installation
• Durable construction designed to withstand off-road stress
• Manufacturer Part Number: 6178433

Fits 1990-1997 Toyota Land Cruiser and 1996-1997 Lexus LX450 Base models (80 Series).

The ARB Left Hand Side (LHS) Spare Tire Carrier provides a rugged, practical solution for relocating your spare wheel from the vulnerable under-vehicle position or the factory door hinges. By mounting the tire directly to the ARB rear bumper assembly via a heavy-duty swing-out arm, you eliminate stress on the rear door assembly and prevent rattles and seal failure. This carrier is specifically designed for 80 Series models equipped with fender flares and features a durable black powder-coated finish.

Operation is engineered for ease of use, utilizing a gas-strut-assisted opening mechanism that holds the carrier in position even on uneven terrain. The dual shear pivot design ensures maximum structural integrity, while the multi-fit wheel stud system accommodates various rim selections. This unit requires an ARB rear bumper to complete the installation and is capable of carrying up to a 35-inch tire.

• Manufacturer Part Number: 5711231
• Gas strut assisted swing-out operation for simple one-handed use
• Dual shear pivots for superior arm strength and durability
• Secure locking system with provision for a padlock
• High-quality black powder coat finish
• Compatible with models featuring OE fender flares
• Provision for optional camp light or HF antenna brackets
• Accommodates up to a 35-inch spare tire
• Note: Requires ARB rear bumper for installation

The ARB Zero 101 Quart Dual Zone Fridge Freezer (MPN 10802962) is engineered for long-range travel, providing independent climate control in a rugged, portable package. Designed for use in vehicles, campers, and trailers, this dual-zone unit allows you to refrigerate and freeze contents simultaneously at different temperatures. It features a highly efficient variable-speed compressor with a boost function for rapid temperature pull-down and integrated anti-condensation technology to keep your cargo dry.

• Dual independently controlled cooling zones for flexible fridge/freezer configurations
• Heavy-duty steel outer casing with recessed carry handles and integrated tie-down points
• Wireless monitoring and control via Bluetooth-enabled mobile devices
• Power options include front AC inlet and dual DC inlets at both ends for custom installations
• Internal 5V 3000mA USB outlet for charging devices
• Versatile removable internal basket system with specific provisions for organization
• Reversible quick-release lid with non-slip glass and bottle provisions
• Low power draw LED interior lighting
• Manufacturer Part Number: 10802962

The ARB Zero 73 Quart Dual Zone Fridge Freezer provides versatile temperature management for long-range travel, allowing you to run a fridge and freezer simultaneously or two independent fridge zones. Built for the rigors of off-road use, this unit features a tough steel outer casing and a high-efficiency variable-speed compressor that delivers rapid cooling via a dedicated boost function. Anti-condensation technology keeps the interior dry, while the dual DC inlets (front and rear) and front AC inlet offer flexible mounting options for vehicles, campers, or trailers.

• Dual independently controlled cooling zones for simultaneous fridge and freezer operation
• Bluetooth-enabled for wireless monitoring and control via mobile devices
• Variable-speed compressor with rapid cool-down boost function
• Reversible quick-release lid with non-slip glass and bottle provisions
• Durable steel outer casing with recessed carry handles and integrated tie-down points
• Internal removable basket system for organized storage
• 5V 3000mA USB outlet for charging mobile devices
• Low-power draw LED interior lighting
• Dual DC power inlets and front-facing AC inlet
• Manufacturer Part Number: 10802692

The ARB Pinnacle Camp Chair (10500161) provides a premium seating experience for overlanding, camping, or trackside use. Engineered with a heavy-duty black steel frame and a taller backrest, this chair combines structural integrity with ergonomic support. The seat is constructed from durable 600D polyester and 420D ripstop panels, featuring internal padding for long-duration comfort.

A key design feature of the Pinnacle series is the rear quick-release bracket, which allows the frame to be folded down significantly faster than traditional camp chairs. The setup includes extra-wide soft-touch armrests and comprehensive storage solutions, including a side panel with a cup holder and multiple pockets for your gear.

• Material: High-strength 600D polyester and 420D ripstop panels with internal padding
• Frame: Robust black steel construction with contrasting charcoal brackets
• Folding Mechanism: Rear quick-release bracket for rapid setup and pack-down
• Storage: Integrated side organizer panel with cup holder and a rear mesh pocket
• Armrests: Extra-wide soft-touch design for increased comfort
• Carry Bag: Included heavy-duty 600D polyester bag with webbing straps and a padded shoulder strap
• Manufacturer Part Number: 10500161

The ARB Base Camp Chair (10500151) is a heavy-duty, portable seating solution engineered for overlanding, camping, and trackside use. Built on a robust black steel frame with charcoal crossbars, this chair utilizes large flexible feet to maintain stability on uneven or soft terrain. The seat is constructed from high-strength 600D polyester and 420D ripstop panels, featuring internal padding and a tonal print for a refined look and long-distance comfort.

• Heavy-Duty Frame: Strong steel construction with charcoal crossbars for long-term reliability.
• Advanced Materials: 600D polyester and 420D ripstop fabric panels provide superior durability against the elements.
• Integrated Comfort: Internal seat padding and padded armrests offer enhanced support for extended use.
• Practical Storage: Features a side-mounted swivel cup holder and a rear mesh pocket for gear and accessories.
• Premium Portability: Includes a matching 600D polyester carry bag with webbing straps and a padded shoulder strap.
• MPN: 10500151

Fits 2008-2021 Toyota Land Cruiser LC200 models equipped with KDSS (Base and Heritage Edition).

The ARB Old Man Emu BP-51 (Bypass 51mm) Light Suspension Lift Kit brings race-proven bypass technology to the Toyota Land Cruiser LC200. Designed specifically for vehicles with the Kinetic Dynamic Suspension System (KDSS), this kit provides a significant upgrade in both on-road handling and off-road compliance. The 51mm big-bore shocks utilize internal bypass technology to deliver position-sensitive damping, ensuring a plush ride during normal travel while providing firm control at the end of the stroke to prevent bottoming out.

Each shock absorber is fully adjustable for both rebound and compression, allowing you to tune the ride to your specific vehicle setup and terrain. The shock bodies and remote reservoirs are constructed from 6061 T6 aluminum with a 40-micron hard-anodized finish for superior heat dissipation and corrosion resistance. This "Light" kit is engineered to accommodate vehicles with minimal additional weight, maintaining optimal ride height and performance without the harshness of heavier-rated springs.

• Bypass technology provides position-sensitive damping for superior chassis control
• External rebound and compression adjustment for custom-tuned ride quality
• 51mm bore with remote reservoir for increased oil capacity and cooling
• 6061 T6 aluminum construction with Type 3 40-micron hard anodizing
• Designed specifically for LC200 models with KDSS
• Direct bolt-on fitment with no vehicle modifications required
• Manufacturer Part Number: OMELC08BP51LK

Fits 2008-2021 Toyota Land Cruiser Base and Heritage Edition models equipped with KDSS.

The Old Man Emu BP-51 (Bypass 51mm diameter bore) suspension system brings race-proven bypass technology to the Toyota Land Cruiser 200 Series. Developed and tested in the Australian Outback, these position-sensitive shock absorbers feature internal bypass ports that allow oil to bypass the piston at ride height for a plush feel, while increasing damping force at the ends of the stroke for superior bottom-out control. This "Heavy" kit is specifically engineered to maintain ride height and handling performance on vehicles equipped with significant additional weight, such as steel bumpers, winches, and drawer systems.

Constructed from 6061 T6 aluminum with a Type 3 40-micron hard-anodized finish, the shock bodies and remote reservoirs offer exceptional heat dissipation and corrosion resistance. The system is fully adjustable for both rebound and compression, allowing drivers to tune the damping to match their specific vehicle load and terrain requirements. This kit is designed for a direct bolt-on installation using factory mounting points, requiring no permanent vehicle modifications.

• Bypass 51mm (BP-51) internal bypass technology for position-sensitive damping
• Adjustable compression and rebound settings for custom-tuned ride quality
• High-grade 6061 T6 aluminum construction for maximum heat dissipation
• Type 3 40-micron hard-anodized finish for superior protection against stone damage and corrosion
• Remote reservoirs maintain oil volume and prevent shock fade during high-speed off-road use
• Specifically tuned for LC200 models with Kinetic Dynamic Suspension System (KDSS)
• Manufacturer Part Number: OMELC08BP51HK