Fits select 1990-2009 Toyota Land Cruiser, 4Runner, and Lexus LX450.

The ARB Old Man Emu (OME) 10mm Front Coil Spring Packer is a precision-engineered suspension component designed to fine-tune vehicle ride height. This 10mm trim packer (MPN: OME80PF10) is frequently used to restore nominal lift height on vehicles that have experienced front-end sag due to the addition of heavy accessories like bull bars or winches. By providing a fixed amount of lift at the coil seat, it allows for precise leveling of the vehicle's stance without changing the spring rate.

• Thickness: 10mm
• Position: Front Coil Springs
• Material: High-density durable polymer construction
• Function: Restores ride height and corrects vehicle trim lean
• Integration: Designed to work seamlessly with Old Man Emu suspension systems
• Manufacturer Part Number: OME80PF10

Fits 2010-2023 Toyota 4Runner models equipped with KDSS (Kinetic Dynamic Suspension System). This comprehensive suspension system is designed for drivers who require both refined highway comfort and aggressive off-road performance.

The Old Man Emu BP-51 (Bypass 51mm) series brings professional race technology to the Toyota 4Runner. These big-bore, position-sensitive internal bypass shock absorbers provide varying levels of damping based on the piston's position and velocity. This results in a compliant ride over minor imperfections while significantly increasing damping at the end of the stroke to prevent harsh bottoming out during high-speed off-road maneuvers.

Constructed from aircraft-grade 6061 T6 aluminum with a type 3, 40-micron hard-anodized finish, the BP-51 system ensures superior heat dissipation and corrosion resistance. The bypass system is fully adjustable for both rebound and compression, allowing you to fine-tune your suspension for vehicle load, terrain, and driving style.

• Internal bypass technology for position-sensitive damping
• Independent adjustability for compression and rebound
• 6061 T6 aluminum body and reservoir for maximum cooling
• High-flow reservoir with Dash 6 braided hoses
• 3-year manufacturer warranty
• Manufacturer Part Number: OME4RNR10MKBP51KD

Fits 2010-2023 Toyota 4Runner models with KDSS.

Bring race-proven internal bypass technology to your 5th Gen 4Runner with the ARB Old Man Emu (OME) BP-51 High-Performance Bypass Suspension Kit. This 3-inch heavy-duty lift kit (MPN: OME4RNR10HKBP51KD) is engineered specifically for vehicles with KDSS, featuring position-sensitive damping that delivers a plush ride during normal travel while providing significant end-zone control to prevent harsh bottoming or topping out during technical off-road maneuvers.

• Internal Bypass Technology: Big-bore, position-sensitive shock absorbers provide varying levels of damping based on piston velocity and stroke position for unparalleled chassis control.
• Independent Adjustability: External, tool-free adjustment of both rebound and compression allows you to fine-tune the ride for specific vehicle loads and terrain preferences.
• Aircraft-Grade Construction: Shock bodies, reservoirs, and components are machined from 6061-T6 aluminum for maximum heat dissipation and weight reduction.
• Rugged Durability: Finished with a Type 3, 40-micron hard anodized coating to provide exceptional resistance to corrosion and stone damage.
• Heavy Load Support: Spring rates and valving are optimized for 4Runners carrying significant constant weight from bumpers, winches, or armor.

Each BP-51 kit is designed, tested, and manufactured in-house by OME engineers and includes a 3-year manufacturer warranty.

Fits 2008-2021 Toyota Land Cruiser Base and Heritage Edition models equipped with KDSS.

The ARB Old Man Emu BP-51 (Bypass 51mm) suspension kit brings race-inspired technology to the Toyota Land Cruiser 200 Series. These position-sensitive bypass shock absorbers feature a massive 51mm bore and remote reservoirs, delivering exceptional heat dissipation and consistent damping performance under the harshest off-road conditions. This specific kit is valved for lighter front-end loads and includes Old Man Emu Upper Control Arms (UCAs) to maintain proper alignment and suspension geometry during increased travel.

Engineered for a direct bolt-on installation without vehicle modifications, the BP-51 system allows for independent adjustment of both rebound and compression. This enables drivers to fine-tune the ride quality to accommodate varying terrain and vehicle loads. Every BP-51 shock is manufactured in-house by ARB, utilizing high-grade materials to withstand corrosion and debris.

• Construction: 6061 T6 aluminum body and reservoir for superior heat dissipation
• Finish: Type 3 40-micron hard anodized coating for maximum stone and corrosion resistance
• Bore Size: 51mm diameter for high-volume oil flow and precise control
• Adjustability: Internal bypass technology with external rebound and compression tuning
• Included Components: Front and rear bypass shocks, remote reservoirs, 6061 aluminum top hats, and Upper Control Arms (UCAs)
• MPN: LCBP51LKP

Fits 2008-2021 Toyota Land Cruiser Base and Heritage Edition models. This heavy-duty kit is specifically engineered for vehicles equipped with additional weight and the Kinetic Dynamic Suspension System (KDSS).

The Old Man Emu BP-51 (Bypass 51mm) shock absorbers bring race-proven internal bypass technology to the Toyota Land Cruiser. Unlike traditional shocks that are strictly velocity-sensitive, these position-sensitive dampers utilize internal passages to redirect oil flow around the piston at specific points in the stroke. This provides a compliant, plush ride during normal driving while significantly increasing damping force at the end-zones to prevent bottoming out during aggressive off-road maneuvers.

Constructed from 6061-T6 aluminum with a Type 3 40-micron hard-anodized finish, the shock bodies and remote reservoirs offer superior heat dissipation and corrosion resistance. The included Upper Control Arms (UCAs) ensure proper suspension geometry and alignment after lifting, maintaining stability and tire wear standards.

• Bypass technology provides position-sensitive damping for maximum comfort and control
• Independent on-vehicle adjustment for both rebound and compression
• High-grade 6061-T6 aluminum construction for heat management
• Heavy Kit configuration designed to accommodate additional vehicle weight (bumpers, winches, armor)
• Compatible with factory KDSS (Kinetic Dynamic Suspension System)
• Includes heavy-duty Upper Control Arms and all necessary mounting hardware
• Manufacturer Part Number: LCBP51HKP

Fits 2010-2014 Toyota FJ Cruiser Base models without the headliner-mounted crawl control module.

The ARB Outback Roof Console (BRCFJ) provides a dedicated, accessible mounting location for communications gear and additional cabin storage without sacrificing floor or dash space. Designed to position a standard DIN-sized radio directly above the rearview mirror, it ensures clear visibility and easy access to controls while keeping the microphone cable securely hooked out of the way and within reach.

• Integrated Storage: Features a secure drop-down storage locker ideal for sunglasses, wallets, or mobile devices.
• High-Output Lighting: Equipped with four banks of brilliant white LED interior lights with three-way switching for door-activated, manual on, or off functions.
• DIN Radio Mount: Arrives ready for standard DIN-sized radio installation with a dedicated microphone cable hook.
• Precision Construction: Contoured to fit the FJ Cruiser headliner for a clean, integrated appearance.
• Manufacturer Part Number: BRCFJ

The ARB ARW120SA brings next-generation recovery technology to your vehicle with a compact, all-in-one motor control design. By integrating the control unit within the winch housing, this design ensures clean fitment on modern bumpers and maintains compatibility with vehicle sensors. A custom built-in Albright contactor provides direct-connection power, increasing motor efficiency and eliminating the need for a separate, bulky control box.

Engineered for maximum durability, the ARB Winch utilizes a 4-stage hardened steel gearbox with a 171:1 ratio for fast line speeds and superior load distribution. The system is IP68-rated for complete protection against dust and water intrusion. For secure operation, a gearbox-mounted brake ensures 100% load holding, while the one-piece bridging plate improves torsional rigidity during heavy pulls. Control is handled via a dual-mode remote, offering wireless operation up to 40 meters on a secure 2.4GHz link or a direct 5-meter wired connection.

• Manufacturer Part Number: ARW120SA
• Rated Line Pull: 12,000 lbs
• Rope Type: Synthetic
• Gearbox: 4-Stage hardened steel gears (171:1 ratio)
• Brake: Gearbox-mounted, 100% load holding
• Ingress Protection: IP68 waterproof and dustproof
• Clutch: 16-position clockable handle (22.5-degree increments)
• Remote: 2.4GHz wireless and 5m wired dual-connection
• Isolation Switch: 500A with universal mount and stainless lanyard

The ARB 6177349 Bumper Mounting Kit is a vehicle-specific hardware solution required to securely attach the ARB 3424050 bumper to the vehicle chassis. This fitting kit is engineered to provide a precise interface between the bumper and the frame, ensuring structural integrity and proper alignment during installation.

Designed with safety as a priority, this mounting system is specifically developed to maintain the performance of the vehicle's factory safety systems. By utilizing dedicated mounting points and high-strength components, the 6177349 kit allows the bumper to function as intended without compromising the vehicle's engineered impact zones.

• Manufacturer Part Number: 6177349
• Required Compatibility: Designed specifically for ARB Bumper part number 3424050
• Contents: Includes all necessary brackets and high-grade hardware for chassis mounting
• Design: Vehicle-specific geometry for a bolt-on fit and safety system compatibility
• Construction: Heavy-duty materials built to withstand the stresses of off-road use and winch recovery

Fits 2005-2023 Toyota 4Runner (Select models with KDSS). This complete ARB Old Man Emu suspension system is engineered for the 4Runner owner who demands racing-grade technology for both daily driving and off-road exploration. The BP-51 (Bypass 51mm) shocks utilize internal bypass technology to provide position-sensitive damping, delivering a plush ride during normal travel and significantly increased control at the end of the stroke to prevent harsh bottoming out.

Constructed from 6061 T6 aluminum with a Type 3 40-micron hard-anodized finish, these shock absorbers offer superior heat dissipation and corrosion resistance compared to traditional steel bodies. The included remote reservoirs increase oil capacity to prevent fade during technical trail work. This medium-load kit is specifically tuned for vehicles with some additional weight and includes Upper Control Arms (UCAs) to maintain correct alignment geometry and maximize wheel travel at the 3-inch lift height.

• Bypass 51mm (BP-51) internal bypass technology for position-sensitive damping
• Independent adjustment of both rebound and compression for custom ride tuning
• High-grade 6061 T6 aluminum shock bodies and reservoirs
• Type 3 40-micron hard-anodized finish for stone and corrosion protection
• Specifically designed for vehicles equipped with Kinetic Dynamic Suspension System (KDSS)
• Includes heavy-duty Upper Control Arms to restore factory alignment specs
• Manufacturer Part Number: 4RBP51MKP

Fits 2005-2023 Toyota 4Runner models equipped with KDSS.

The ARB Old Man Emu BP-51 (Bypass 51mm) suspension kit brings race-inspired internal bypass technology to daily-driven adventure vehicles. Engineered specifically for Toyota 4Runners with the Kinetic Dynamic Suspension System (KDSS), this 3-inch Heavy Kit is tuned to manage the additional weight of aftermarket bumpers, winches, and cargo while providing superior chassis control. These position-sensitive shocks feature independent adjustability for both rebound and compression, allowing you to fine-tune ride quality for varying loads and terrain without removing the shock from the vehicle.

• 51mm bore diameter with revolutionary internal bypass technology
• Independent compression and rebound adjustment for custom ride tuning
• 6061-T6 aluminum shock body and remote reservoir for optimal heat dissipation
• Type 3 40-micron hard anodized finish for maximum corrosion and stone damage resistance
• Includes Upper Control Arms (UCAs) to maintain proper alignment and suspension geometry
• Heavy-duty 6061 grade aluminum top hat for durable mounting
• Direct bolt-on installation requires no permanent vehicle modifications
• Manufacturer Part Number: 4RBP51HKP

Fits 2016 Toyota Land Cruiser Base models.

The ARB Camera Relocation Kit V2 (MPN: 3515090) is an essential component for 200 Series owners who have upgraded to ARB frontal protection. This kit allows you to relocate the factory front-facing camera to a position that maintains a clear field of vision, preventing the bumper's structure from obstructing the camera's view during off-road spotting or tight parking maneuvers.

Built to integrate seamlessly with specific ARB bull bars, this kit ensures that you retain the utility of your vehicle's advanced driver-assist systems without compromising on protection. The relocation bracket is designed for a clean, professional finish that mirrors the factory fitment.

• Maintains factory front camera functionality on MY16 200 Series models
• Designed specifically for use with ARB bumper part numbers 3215210, 3415220, and 3915210
• Ensures unobstructed camera views for off-road and parking use
• Includes all necessary hardware for installation
• Manufacturer Part Number: 3515090

Fits 2003-2004 Land Rover Discovery HSE, S, and SE models. This ARB Deluxe Winch Bar is engineered for serious off-road protection and recovery, replacing the factory bumper with a fully integrated mounting system. Constructed from durable steel with a black powder coat finish, it features a multi-fold upswept and tapered wing design for maximum clearance and improved approach angles.

This bumper is winch-ready and compatible with most electric low-mount winches up to a 10,000 lb capacity. It includes provision for driving lights and maintains compatibility with original equipment (OE) fog lights. For recovery, the bar provides twin Hi-Lift jacking points and extensive under-protection panels to shield vital components from trail debris.

• Heavy-duty steel construction with .250 grade wall tubing
• Durable black powder coat finish and urethane buffers
• Split pan design for increased strength and airflow to the radiator
• Suits OE fog lights and provides mounts for additional driving lights
• Compatible with most low-mount winches up to 10,000 lbs
• Note: Hawse fairlead spacer kit (part 3500600) required when fitting a hawse fairlead
• Manufacturer Part Number: 3432120

Please note that the required fit kit is not included with the main bumper assembly.

The ARB 6mm Pressure Supply Kit (171321) is a heavy-duty pneumatic upgrade designed to improve the reliability and serviceability of your vehicle's locking differentials. By transitioning to a 6mm pneumatic standard, this kit provides a more robust alternative to older 5mm systems. It is completely retrofittable for all ARB Air Lockers currently utilizing 3.5mm copper tube seal housings.

This kit features a black polymer airline with 50% more wall thickness than previous designs, offering significantly higher resistance to the cuts, abrasions, and heat-cycling common in off-road environments. The included bulkhead fittings are highly configurable, allowing for either a traditional straight connection or a 90-degree orientation to accommodate tight mounting locations. The system also utilizes 1/8 BSP standard threads and push-in fittings with positive-click disengagement for a secure, leak-free seal.

• Manufacturer Part Number: 171321
• Airline: 6mm black polymer with 50% increased wall thickness
• Fittings: 6mm push-in with positive-click disengagement
• Bulkhead Connector: Configurable for straight or 90-degree installation
• Threads: Standard 1/8 BSP fittings
• Installation Note: Compression nut is best set using a PZ3 Pozidriv screwdriver to prevent overtightening of the copper tube connection
• Compatibility: Fits all ARB Air Lockers with 3.5mm copper tube seal housings

Fits 2007-2021 Toyota Tundra models.

The ARB Old Man Emu BP-51 Rear Shock Fitting Kit (VM80010035) is a vehicle-specific mounting solution required for the installation of BP-51 high-performance internal bypass shock absorbers. Engineered to integrate seamlessly with the Tundra chassis, this kit includes the specific hardware, spacers, and mounting components necessary to secure BP-51 dampers to the factory suspension points. By using dedicated fitting kits, Old Man Emu ensures that each shock absorber maintains correct clearances and alignment throughout the full range of suspension travel.

• Specifically engineered for 2007-2021 Toyota Tundra rear suspension
• Required for the installation of Old Man Emu BP-51 bypass shocks
• Maintains precise tolerances for high-performance off-road dampening
• Replaces or adapts factory mounting points for secure fitment
• Manufacturer Part Number: VM80010035
• Warranty: 3 Year / 37,000 Mile

Fits 2007-2021 Toyota Tundra (all models/trims including SR5, Limited, Platinum, and TRD Pro).

The ARB Old Man Emu BP-51 Fit Kit provides the vehicle-specific mounting hardware required to install BP-51 internal bypass shock absorbers on the front of your vehicle. Designed for precision integration, this kit ensures that the high-performance bypass shocks are securely mounted while maintaining proper clearances and suspension geometry.

• Specifically engineered for front-end installation on the 2007-2021 Tundra platform
• Includes all necessary brackets and hardware for a secure, vehicle-specific fit
• Integrates seamlessly with Old Man Emu suspension systems
• Durable construction to withstand rigorous off-road conditions
• Manufacturer Part Number: VM80010034
• Warranty: 3 Year / 37,000 Miles

Fits 2010-2023 Toyota 4Runner models including TRD Pro, SR5, Limited, and Trail.

The ARB Old Man Emu BP-51 Front Fit Kit is engineered specifically to integrate high-performance BP-51 internal bypass shock absorbers with your vehicle's factory mounting points. This vehicle-specific kit ensures a secure, precise fitment that maintains the integrity of your suspension geometry while facilitating the installation of specialized bypass dampening technology.

Designed for off-road durability, this kit includes the necessary components to mount the front shock absorbers and remote reservoirs correctly, preventing interference and ensuring long-term reliability under heavy use.

• Manufacturer Part Number: VM80010028
• Position: Front
• Application-specific design for 5th Gen 4Runner
• Integrates seamlessly with Old Man Emu BP-51 shock absorbers
• Warranty: 3-Year / 37,000-Mile

Fits select 2005-2023 Toyota Tacoma models (Base, Limited, Pre Runner, SR, SR5, Trail, TRD Off-Road, TRD Pro, TRD Sport, and X-Runner).

The ARB Old Man Emu BP-51 Fit Kit provides the vehicle-specific hardware required to properly mount BP-51 Internal Bypass Shocks and their external reservoirs to the rear of your Toyota Tacoma. This kit ensures that reservoirs are securely positioned for clearance and heat dissipation, maintaining the integrity of your high-performance suspension system.

• Specifically engineered for 2005-2023 Toyota Tacoma rear suspension geometry
• Includes all necessary brackets and hardware for shock and reservoir installation
• Designed for seamless integration with Old Man Emu BP-51 bypass shock absorbers
• Durable construction to withstand off-road use and vibration
• Manufacturer Part Number: VM80010017

Fits 2005-2023 Toyota Tacoma and 2020-2021 Toyota Land Cruiser.

The ARB Old Man Emu BP-51 Front Shock Fit Kit (VM80010016) is a vehicle-specific mounting solution designed to integrate high-performance BP-51 bypass shocks and their external reservoirs with your vehicle's chassis. This kit provides the precise bracketry and hardware required to ensure proper clearance and secure attachment for both the shock absorbers and reservoir canisters during high-articulation off-road use.

• Vehicle-specific design for 2005-2023 Tacoma and 2020-2021 Land Cruiser
• Ensures proper mounting and clearance for external shock reservoirs
• Includes all necessary brackets, hardware, and spacers for front installation
• Engineered for seamless integration with Old Man Emu BP-51 suspension systems
• Manufacturer Part Number: VM80010016

Fits select 2010-2023 Toyota 4Runner, FJ Cruiser, and Land Cruiser models.

This ARB Old Man Emu BP-51 Fit Kit provides the vehicle-specific mounting hardware required to install BP-51 high-performance internal bypass shock absorbers. Engineered for a precise bolt-on fit, this kit ensures that the reservoir and shock body are correctly positioned within the rear suspension geometry of your Toyota, maintaining clearances through the full range of articulation.

Built to handle the increased dampening forces of the BP-51 series, this kit replaces factory mounting points with heavy-duty hardware and specialized components designed for off-road durability.

• Specifically designed for rear suspension applications
• Includes all necessary mounting brackets and hardware for a complete installation
• Compatible with BP-51 Internal Bypass Shock Absorbers
• Durable construction to withstand harsh off-road environments
• Manufacturer Part Number: VM80010010

Fits 2010-2023 Toyota 4Runner models equipped with the Kinetic Dynamic Suspension System (KDSS).

The ARB Old Man Emu BP-51 Front Fitting Kit is an essential component for installing BP-51 high-performance internal bypass shock absorbers. Engineered specifically for the Toyota 150-series platform, this kit ensures that the advanced bypass shocks integrate seamlessly with the vehicle's front suspension geometry, providing the necessary clearances and secure mounting points required for KDSS-equipped models.

At ARB, integration is handled at the highest level. Rather than using generic hardware, this vehicle-specific kit is designed to maintain factory tolerances while allowing for the extreme performance of the BP-51 series. Whether you are replacing worn components or performing a fresh bypass shock installation, this kit provides the professional-grade hardware needed for a reliable setup.

• Manufacturer Part Number: VM80010009
• Position: Front
• Compatibility: Toyota 4Runner (KDSS Models)
• Application: Required for BP-51 Bypass Shock installation
• Warranty: 3-Year / 37,000-Mile Limited Warranty

Fits 1960-2021 Toyota Land Cruiser Base and Heritage Edition models equipped with KDSS.

This vehicle-specific fitting kit is required for the proper installation of Old Man Emu (OME) BP-51 high-performance bypass shock absorbers. Specifically engineered for the Land Cruiser 200 Series chassis equipped with the Kinetic Dynamic Suspension System (KDSS), this kit ensures correct mounting geometry and clearance for the shock reservoirs and bypass bodies.

As part of the ARB suspension integration system, this kit replaces or supplements factory mounting points with heavy-duty brackets designed to withstand the rigors of off-road use. It includes all necessary hardware to secure the BP-51 system to the rear of your vehicle.

• Manufacturer Part Number: VM80010005
• Position: Rear
• Compatibility: Models with KDSS (Kinetic Dynamic Suspension System)
• Includes: Vehicle-specific brackets and mounting hardware
• Series: BP-51 (Internal Bypass)

Fits 1960-2021 Toyota Land Cruiser and 2008-2014 Toyota FJ Cruiser.

The ARB Old Man Emu BP-51 Rear Fit Kit is engineered to provide the essential mounting hardware and specialized components required to install BP-51 Internal Bypass shocks. This vehicle-specific kit ensures that the high-performance dampers are correctly oriented and secured to the factory mounting points, maintaining the necessary clearances for suspension articulation and bypass tube positioning.

As part of the comprehensive Old Man Emu suspension system, this kit replaces or augments standard hardware with heavy-duty components designed to handle the increased damping forces of a bypass setup. By utilizing this dedicated fit kit, installers can ensure a professional, bolt-on integration that preserves the vehicle's structural integrity while maximizing off-road performance.

• Precision Engineering: Specifically designed for the rear suspension geometry of select Toyota 4WD platforms.
• Complete Integration: Provides the specific spacers, brackets, and fasteners required for BP-51 shock compatibility.
• Durable Finish: Components are treated to resist corrosion and withstand harsh off-road environments.
• MPN: VM80010004

This ARB Old Man Emu BP-51 Front Suspension Fit Kit provides the necessary vehicle-specific hardware to facilitate the professional installation of BP-51 bypass shock absorbers. Fits 1960-2021 Toyota Land Cruiser models (Base and Heritage Edition).

As part of the comprehensive Old Man Emu suspension range, this kit is engineered for high-level integration, ensuring that advanced bypass shock technology remains securely mounted under demanding off-road conditions. Rather than utilizing universal components, ARB develops these fit kits to match factory mounting points, maintaining correct suspension geometry and clearance for the bypass reservoirs.

• Manufacturer Part Number: VM80010003
• Engineered specifically for ARB BP-51 bypass shock installation
• Includes all required mounting brackets and specialized hardware
• Compatible with 1960-2021 Toyota Land Cruiser (Base and Heritage Edition)
• Durable finish designed to withstand harsh underbody environments

The Old Man Emu UCB19 Center Bolt and Nut is a critical component for maintaining the alignment and integrity of your vehicle's leaf spring pack. As part of ARB’s fully integrated suspension ecosystem, this replacement center pin ensures that individual spring leaves remain precisely positioned and secured within the assembly.

Engineered to handle the shear loads and environmental stresses inherent in heavy-duty and off-road suspension systems, this bolt is a necessary replacement during leaf pack maintenance, rebuilds, or when adding an extra leaf. Using genuine OME hardware ensures the tolerances match your existing suspension components for a reliable, safe installation.

• Product Type: Leaf Spring Center Bolt and Nut
• Manufacturer Part Number: UCB19
• Function: Secures and aligns leaf spring packs
• Brand: Old Man Emu / ARB
• Included: (1) Center Bolt and (1) Nut

The ARB TRED Pro (TREDPROR) is a professional-grade recovery board system engineered to provide traction for 4WDs, ATVs, and heavy equipment in sand, mud, or snow. Manufactured in Australia using a high-quality nylon blend, these boards are designed to flex under pressure while maintaining high wear resistance in ambient temperatures ranging from -15°C (5°F) to 70°C (158°F).

• EXOTRED Dual Composite Construction: Patented construction protects the board from damage during wheelspin by using specialized materials for the teeth and the board body.
• SIPE-LOCK Grip Profile: A patented profile specifically engineered to engage with tire sipes and water evacuation channels for maximum traction.
• Progressive Variable Tooth Design: Optimized tooth distribution based on tire tread research to improve initial engagement and grip.
• Heavy-Duty Rating: Suitable for vehicle weights up to 9,900 lbs.
• Integrated Recovery Features: Improved shovel and handle designs with a new contour ramp to assist in clearing debris and obstructions.
• Lifetime Warranty: The first recovery board to offer a manufacturer's lifetime warranty.

The ARB TRED Pro (TREDPROGG) represents the next generation of off-road recovery boards, engineered to provide maximum traction in sand, mud, and snow. These boards utilize a patented EXOTRED dual-composite construction, ensuring the board remains flexible under the vehicle's weight while protecting the traction nodules from damage caused by wheelspin. Designed and manufactured in Australia, they are built to withstand the rigors of serious recovery operations.

• EXOTRED Construction: Patented dual-composite material prevents tooth damage during wheelspin while allowing the board to flex without breaking.
• SIPE-LOCK Technology: A patented grip profile engineered to engage with the sipes and water evacuation channels on your tires for immediate bite.
• Progressive Variable Tooth Design: Nodule distribution is optimized based on tire tread data to ensure maximum grip across various tire brands and patterns.
• All-Season Performance: Specialized material formulation remains effective in ambient temperatures ranging from -15°C (5°F) up to 70°C (158°F).
• Superior Capacity: Rated for vehicles weighing up to 9,900 lbs (4,500 kg).
• Ergonomic Design: Features improved shovel entry points and integrated handles for clearing debris and positioning the boards.
• Warranty: Backed by a lifetime warranty.

Each set features a Gun Metal Grey body with Stealth Black teeth. Part Number: TREDPROGG.

The ARB TRED Pro is a professional-grade recovery solution engineered for serious off-road use. Designed to provide traction when vehicles are bogged in sand, mud, or snow, these boards utilize advanced material science to solve the common issue of tooth damage caused by wheelspin. The boards are manufactured in Australia and rated for vehicles weighing up to 9,900 lbs.

• EXOTRED Dual Composite Construction: A patented design that protects the board from catastrophic damage during wheelspin by utilizing two distinct materials.
• SIPE-LOCK Patented Grip: A specialized profile engineered to engage directly with tire sipes (water evacuation channels) for immediate traction.
• Progressive Variable Tooth Design: Tooth distribution is optimized based on research of tire tread patterns to ensure maximum bite across various tire brands and types.
• All-Season Engineering: Built from a wear-resistant nylon blend that remains flexible under pressure in temperatures ranging from 5°F to 158°F (-15°C to 70°C).
• Integrated Recovery Features: Optimized entry and exit ramps for better tire engagement, plus built-in shovels and ergonomic handles for clearing debris.

Technical Specifications:

• Manufacturer Part Number: TREDPROBOB
• Vehicle Weight Rating: Up to 9,900 lb
• Operating Temperature: -15°C (5°F) to 70°C (158°F)
• Material: Nylon blend with dual composite EXOTRED nodules
• Warranty: Manufacturer Lifetime Warranty

The ARB TRED Pro (TREDPROBB) represents the next generation of off-road recovery technology, engineered to provide maximum traction in sand, mud, and snow. These boards feature the patented EXOTRED dual composite construction, which utilizes a specialized nylon material blend to flex under vehicle weight while remaining highly wear-resistant. The progressive variable tooth design is mapped to tire manufacturer tread patterns, ensuring an immediate bite into the tire sipes for an effortless escape.

• EXOTRED Construction: Patented dual-composite build prevents board damage during wheelspin.
• SIPE-LOCK Technology: Distinct grip profile designed to engage with water evacuation channels (sipes) on the outer edges of off-road tires.
• Optimized Geometry: Directional entry and exit points with a specific nodule profile to better conform to the terrain and tire shape.
• All-Season Durability: Engineered for ambient temperatures ranging from -15°C (5°F) to 70°C (158°F).
• Ergonomic Handling: Integrated shovel features and improved handle contours for clearing debris and obstructions.
• Load Capacity: Rated for vehicles weighing up to 9,900 lb.
• Stealth Aesthetics: Stealth black board with matching black nodules.
• Manufacturer Part Number: TREDPROBB
• Warranty: Manufacturer Lifetime Warranty.

The ARB TRED GT Recovery Board is engineered for reliable vehicle extraction in sand, mud, and snow. Built from automotive-grade polypropylene, this recovery tool is designed to provide traction and stability when your vehicle loses momentum in soft terrain. The TRED GT features a convex profile that conforms to the terrain and a concave ramp for optimal tire engagement during initial recovery.

• Progressive Variable Tooth Design: Optimized tooth distribution based on tire tread research for maximum traction and grip.
• SIPE-LOCK: A patented grip profile designed to engage directly with the water evacuation channels (sipes) on tire edges.
• TRED-LINK: Nestable design allows for easy storage and the ability to link multiple boards together to create a continuous recovery surface.
• Multi-Functional Design: Integrated shovel and ergonomic handles allow you to clear debris and obstructions before placing the boards.
• Automotive-Grade Polypropylene: Durable material formulation rated for ambient temperatures between 32°F and 131°F (0°C to 55°C).
• Vehicle Weight Rating: Rated for vehicles weighing up to 8,800 lb.
• Part Number: TREDGTGG

The ARB TRED Quick Release Mounting Kit (TQRMK) provides a secure, efficient solution for mounting recovery boards to your vehicle or trailer. Engineered for rapid deployment, this kit combines a heavy-duty TRED Mounting Baseplate with TRED Quick Release Pins featuring a user-friendly ratchet handle design. This configuration allows you to quickly release or secure your gear, even in harsh off-road conditions.

This mounting system is versatile enough to hold up to four TRED GT, HD, or PRO model recovery boards simultaneously. For added peace of mind, the pins are lockable with a standard padlock to prevent theft. The kit includes stainless steel hardware for a corrosion-resistant installation and flush slot covers to maintain a clean appearance when pins are not in use.

• Compatible with TRED GT, HD, and PRO model recovery boards
• Mounts up to four recovery boards at once
• Quick-release ratchet handle design for fast board deployment
• Stainless steel hardware included for securing pins to the baseplate
• Lockable design (TRED recommends a 30mm padlock with a 5mm shackle)
• Recessed plate mount securing holes and flush slot covers
• Manufacturer Part Number: TQRMK