The ARB 32010X is a precision-engineered tapered roller bearing designed to handle the heavy radial and axial loads common in automotive driveline and differential assemblies. This high-strength component is critical for maintaining precise gear alignment and ensuring smooth, low-friction rotation during operation.

• Manufactured from high-grade steel for durability under extreme torque and stress
• Precision-ground rollers and races minimize friction and heat buildup
• Engineered for consistent tolerances in demanding mechanical environments
• Essential replacement component for differential overhauls or locker service
• Manufacturer Part Number: 32010X

These ARB XR140V75 Quad Rings are essential replacement seals designed for ARB air compressor maintenance. Unlike standard round-profile o-rings, the four-lobed quad ring design provides additional sealing surfaces and reduces friction, ensuring a more reliable, leak-free seal under high-pressure pneumatic conditions. This pair of seals is engineered to maintain factory performance and extend the service life of your compressor assembly.

• Manufacturer Part Number: XR140V75
• Quantity: Pair (Set of 2)
• Design: Four-lobed quad ring profile for superior sealing and reduced wear
• Application: Genuine ARB replacement part for air compressor maintenance

Maintain peak efficiency and prevent internal pressure loss in your ARB air compressor with this pair of XR136V75 quad rings. Designed to provide a superior seal compared to standard circular O-rings, these quad rings (also known as X-rings) feature a four-lobed profile. This design creates two sealing surfaces per side, reducing the friction required to maintain a seal and extending the service life of the compressor's internal components.

• Manufacturer Part Number: XR136V75
• Component Type: Quad Ring / X-Ring Seal
• Quantity: Pack of 2
• Provides superior sealing with reduced friction and resistance to spiral failure

Maintain the peak performance of your ARB air compressor with this genuine ARB Quad Ring XR133V75 set. These high-grade seals are engineered specifically to provide a superior seal within the compressor assembly, preventing pressure loss and ensuring consistent output. The four-lobed quad-ring profile offers a more reliable seal with lower friction than traditional O-rings, reducing wear and preventing seal twisting during high-cycle operation.

• Brand: ARB
• Manufacturer Part Number: XR133V75
• Component Type: Quad Ring / O-Ring
• Quantity: Pair (Pack of 2)
• Direct replacement for worn or leaking compressor seals

This ARB Air Locker Seal Housing Retaining Clip is a genuine replacement component designed to maintain the integrity of your differential's air system. It functions as a secure locking mechanism, holding the seal housing firmly against the bearing journal to ensure the internal O-rings maintain a consistent, leak-free seal during locker engagement.

Constructed from high-quality spring steel, this clip is engineered to withstand the rotational forces and heat cycles found within a high-performance differential. Whether you are performing a routine inspection, replacing O-rings, or completing a full Air Locker rebuild, using a fresh retaining clip prevents play in the seal housing that could lead to air leaks and intermittent locking performance.

• Genuine ARB spare part designed specifically for Air Locker seal housings
• Manufactured from durable spring steel for consistent tension and fitment
• Crucial for maintaining a leak-free pneumatic connection within the differential
• Replaces damaged, bent, or lost factory clips during service or installation

Fits 2024+ Toyota Tacoma models. This ARB Old Man Emu MT64 Suspension Lift Kit provides a 3-inch front and 2-inch rear lift, engineered to deliver the durability required for heavy overland travel without sacrificing on-road comfort. Positioned between the Nitrocharger Sport and the BP-51 bypass series, the MT64 utilizes a massive 64mm internal bore to provide exceptional oil capacity and heat dissipation during long-distance trail driving.

Built from aerospace-grade aluminum, these monotube shocks feature a hard-anodized finish to resist corrosion and rock strikes. The front struts include multiple snap-ring grooves on the body, allowing you to fine-tune the ride height to accommodate heavy front-end accessories like winches or bull bars. This kit replaces the factory suspension components with precision-engineered shocks and springs designed specifically for the weight and geometry of the fourth-generation Tacoma.

• Massive 64mm internal bore for superior heat management and damping consistency
• Monotube design for rapid response and performance in extreme temperatures
• Provides 3 inches of front lift and 2 inches of rear lift
• Adjustable snap-ring grooves for precise front-end height setting
• Durable aerospace-grade aluminum construction with hard-anodized finish
• Direct bolt-on fitment to factory mounting locations

ARB Old Man Emu (OME) Nitrocharger struts and cartridges are engineered to transform your vehicle's ride quality and handling characteristics. Developed by a dedicated team of ride control specialists, these units utilize a twin-tube design to protect internal components from stone damage while providing consistent damping performance across varying terrain and load conditions.

Each Nitrocharger is built with vehicle-specific valving to ensure the damping is perfectly matched to the spring rate and vehicle weight. This precision engineering provides increased control, reduced fade, and improved stability whether you are navigating corrugated off-road tracks or commuting on the highway. These struts serve as a direct-fit replacement for factory components, designed to withstand the rigors of heavy-duty use.

• Twin-tube construction with a heavy-gauge outer tube to protect against impact
• Triple-lip oil seal ensures maximum fluid retention and pressure seals
• Nitrogen gas charging prevents aeration and oil foaming for consistent performance
• Hardened chrome piston rod reduces friction and increases service life
• Internal valving tuned for specific vehicle applications and spring rates

Old Man Emu (OME) struts and cartridges by ARB are engineered to provide superior ride quality and control across varied terrain. Unlike mass-market replacements, these nitrogen gas-charged units are specifically valved to account for the additional weight of off-road accessories like bull bars, winches, and recovery gear, ensuring the suspension remains composed under load.

• Nitrogen gas charging prevents aeration and oil foaming for consistent damping performance
• Twin-tube design provides a durable outer shell to protect internal components from stone damage
• Multi-lip oil seal maintains internal pressure and extends service life in harsh conditions
• Tuned valving reduces body roll and improves vehicle stability during cornering and braking
• Heavy-duty construction built to withstand the rigors of overlanding and technical off-road use

Whether replacing worn factory components or upgrading for increased load-carrying capacity, these struts deliver a balanced damping response that enhances both on-road comfort and off-road articulation.

ARB BP-51 shock absorbers bring race-proven internal bypass technology to your vehicle, delivering position-sensitive damping that excels in both technical off-road terrain and on-road transit. The BP-51 (Bypass 51mm) series features an internal bypass system that provides a plush, comfortable ride during normal suspension travel while significantly increasing damping force as the shock reaches the end of its stroke to prevent bottoming out.

• Internal bypass, position-sensitive damping technology
• 51mm bore diameter for increased oil capacity and thermal stability
• Independent on-vehicle adjustment of both compression and rebound damping
• 6061-T6 aluminum shock body for superior heat dissipation and corrosion resistance
• Durable dash 6 high-pressure hydraulic hose with heat-resistant fittings
• Designed, developed, and tested by Old Man Emu

Fits 2005-2023 Toyota Tacoma (Base, Limited, Pre Runner, SR, SR5, Trail, TRD Off-Road, TRD Pro, TRD Sport, and X-Runner).

Old Man Emu BP-51 (Bypass 51mm) internal bypass shock absorbers bring professional-grade racing technology to your 2005-2023 Toyota Tacoma. Unlike traditional shocks that only provide damping based on piston speed, the BP-51 system is position-sensitive. It utilizes internal bypass ports to allow fluid to redirect around the piston at specific points in the stroke, resulting in a plush ride during normal driving and significantly increased damping force at the extremes of travel to prevent bottoming out. This kit provides a 2-inch front lift designed for vehicles carrying 0-330 lbs of additional weight, such as a winch or bumper, while maintaining factory rear height.

• Internal bypass technology for position-sensitive damping
• Independent on-vehicle adjustment of both compression and rebound
• Front lift height: 2 inches (rated for 0-330 lbs additional load)
• Rear lift height: 0 inches (stock height)
• 6061-T6 aircraft-grade aluminum shock bodies for superior heat dissipation
• Dash 6 high-temperature Teflon hoses with high-flow fittings
• Specifically tuned for the Toyota Tacoma chassis

The BP-51 (Bypass 51mm bore) Internal Bypass shock absorber by Old Man Emu provides a professional-grade suspension solution for off-road enthusiasts who demand both high-speed control and low-speed comfort. Developed and tested in the Australian Outback, these shocks utilize internal bypass technology to deliver position-sensitive damping. This allows for a plush ride during normal travel while significantly increasing damping force at the ends of the stroke to prevent harsh bottoming out or topping out.

Construction features high-grade 6061-T6 aluminum to provide superior heat dissipation compared to traditional steel bodies, preventing fade during extended corrugated track sessions. Each shock features independent, on-vehicle adjustment for both compression and rebound, allowing you to fine-tune your suspension for varying accessory loads or specific terrain challenges without disassembly.

• 51mm bore diameter with internal bypass ports for position-sensitive damping
• 6061-T6 aluminum body with a hard-anodized finish for maximum cooling and corrosion resistance
• Independent on-vehicle adjustment of rebound and compression damping
• External remote reservoir for increased oil capacity and thermal stability
• High-temperature dash-6 braided hoses with swivel fittings
• Impact-resistant stone guard protects the polished piston shaft from debris

ARB Old Man Emu Nitrocharger gas shocks are engineered to provide superior control, durability, and ride comfort across diverse terrain. Designed to handle the rigors of off-road travel and heavy towing, these shocks utilize a twin-tube design that protects the internal components from stone damage while ensuring consistent valving performance. Whether you are navigating technical trails or highway cruising, these dampers provide the stability and load control required for overland and utility applications.

• Twin-tube construction for increased durability and protection against impact
• Multi-deflective disc valving system provides precise control for better handling
• Nitrogen gas charged to prevent aeration and maintain damping consistency
• Triple-lip oil seal for long-term reliability under high-temperature conditions
• Heavy-duty bushings for reduced noise, vibration, and harshness (NVH)
• Vehicle-specific valving ensures optimal performance for your specific setup

Old Man Emu Nitrocharger Sport struts and cartridges are engineered to transform your vehicle's handling and ride quality, whether navigating technical trails or highway transit. Developed by ARB's suspension engineers, these units utilize a twin-tube design to protect internal components from stone damage while providing consistent damping performance under load.

By utilizing nitrogen gas charging and application-specific valving, OME struts significantly reduce aeration and oil foaming, preventing shock fade during extended off-road use. They are designed to work as part of a complete integrated suspension system, effectively managing the added weight of aftermarket accessories like bull bars, winches, and cargo systems.

• Twin-tube construction protects the internal pressure tube from external impact damage.
• Multi-lip oil seal prevents fluid loss and maintains consistent gas pressure.
• Hardened chrome piston rod reduces friction and extends the life of the internal seals.
• Nitrogen gas charging improves heat dissipation and prevents cavitation during rapid cycling.
• Engineered and tuned specifically for increased load-carrying capacity and improved vehicle control.

Fits 2024-2025 Toyota Tacoma models. The ARB Old Man Emu MT64 suspension kit is engineered to provide a high-performance damping solution that bridges the gap between the legendary Nitrocharger and the flagship BP-51 series. Designed specifically for the latest Tacoma chassis, this kit focuses on delivering exceptional ride quality during daily commutes while maintaining the durability needed for demanding off-road expeditions.

• 64mm (2.52") large-diameter monotube body for increased oil capacity and heat dissipation
• Internal bypass technology providing position-sensitive damping for a smooth ride and bottom-out resistance
• Vehicle-specific tuning for the 2024-2025 Toyota Tacoma to optimize handling and load-carrying capacity
• Constructed from aerospace-grade aluminum with an anodized finish for superior corrosion resistance
• Multiple snap-ring grooves allow for adjustable spring seat positions to accommodate different front-end weight setups
• Includes all necessary hardware and components for a direct-replacement installation

Ensure your emergency roadside kit is fully stocked with ARB Speedy Seal Spare Cords. These high-tack, vulcanizing rubber plugs are designed specifically to replenish ARB Speedy Seal tire repair kits, allowing you to address multiple punctures without replacing the entire toolset. Whether you are traversing remote trails or commuting, having fresh repair cords is critical for maintaining the readiness of your recovery gear.

• Designed as direct replenishment plugs for ARB Speedy Seal and Series II kits
• Self-vulcanizing material creates a reliable bond with the tire casing to seal punctures
• Compatible with all tubeless radial and bias-ply tires found on trucks, SUVs, and trailers
• Maintains a secure seal in emergency situations until a permanent repair can be made
• Essential for off-roaders and long-distance overlanders who rely on field-serviceable equipment

Fits 2024-2025 Toyota Tacoma models.

The ARB MT64 suspension system is engineered as the ultimate high-performance shock for the 4th-gen Tacoma, bridging the gap between traditional monotubes and complex bypass shocks. This kit provides a significant lift while drastically improving damping consistency. The 64mm (2.5-inch) internal bore provides massive oil capacity, which is critical for heat dissipation and fade-free performance during long-distance off-road travel or when hauling heavy gear.

To maintain factory-like handling and tire wear, this kit includes ARB Upper Control Arms (UCAs). These arms are essential for restoring alignment geometry and providing the necessary clearance for increased suspension travel and larger wheel-and-tire combinations. The MT64 shocks feature a durable, lightweight aluminum body and vehicle-specific valving to ensure the Tacoma remains composed on the highway and planted on the trail.

• Massive 64mm internal bore for maximum oil volume and cooling efficiency
• Includes ARB Upper Control Arms to correct caster and suspension geometry
• Monotube design with application-specific valving for the 2024-2025 Tacoma
• Internal bypass technology for a refined ride across varied terrain
• High-quality seals and hardware for long-term durability in harsh environments

Maintain precise temperature control in your ARB Zero portable fridge/freezer with this genuine replacement internal thermistor. The thermistor acts as the primary temperature sensor for the unit, sending critical data to the control board to regulate compressor cycles and ensure your food and beverages stay at the exact set point.

• Genuine ARB replacement part designed specifically for the Zero series portable fridge/freezer line.
• Resolves common cooling issues, such as inaccurate temperature readings or erratic compressor behavior.
• Ensures the cooling system operates efficiently to prevent over-cooling or battery drain.
• Direct-fit component for straightforward internal service and maintenance.

Maintain the reliable performance of your locking differential with this genuine ARB Air Locker service part. This H2 Type clutch gear is a precision-engineered replacement component designed to restore the locking engagement of your ARB Air Locker assembly.

• Genuine ARB service replacement part
• Compatible with H2 Type Air Locker configurations
• Includes the required wave spring for proper component tension and return
• High-strength construction designed for heavy-duty drivetrain stress
• Ensures smooth engagement and disengagement of the locking mechanism

Fits 2005-2015 Nissan Xterra (Off-Road, PRO-4X, S, SE, X).

The ARB Deluxe Bumper is a fully engineered replacement mounting system designed to provide maximum protection and functionality for remote area travel. Unlike traditional brush guards, this unit completely replaces the factory bumper with a durable steel structure. The multi-fold upswept and tapered wing design optimizes approach angles for off-road terrain, while the split pan design facilitates increased airflow to the radiator and engine.

This bumper is finished in a durable black powder coat and features urethane buffers for a clean, integrated look. It includes twin Hi-Lift jacking points and provisions for mounting driving lights. For recovery operations, the bumper is compatible with most electric low-mount winches up to 10,000 lb capacity.

• Manufacturer Part Number: 3438270B
• Durable steel construction with black powder coat finish
• Multi-fold upswept and tapered wing design for clearance
• Extensive under-protection panels
• Twin Hi-Lift jacking points and driving light provisions
• Compatible with low-mount winches up to 10,000 lbs
• Loom required for fog light kits 3500440 (halogen) or 3500520 (LED)
• Fairlead spacer kit 3500600 required for hawse fairlead fitment
• Optional ARB fog light kits: 6821201 (halogen) or 3500890 (LED)

Fits 2007-2021 Toyota Land Cruiser models including Base and Heritage Edition.

The ARB BASE Rack (BASE11) is a low-profile, heavy-duty roof storage solution engineered for maximum versatility and ease of use. Measuring 84 inches by 51 inches, this comprehensive kit includes the rack tray, vehicle-specific mounting brackets, and a wind deflector to reduce drag and cabin noise. The system features a unique dovetail extrusion on the perimeter and internal beams, enabling quick, one-handed accessory attachment without the debris-clogging issues common with traditional T-slot channels.

• Dovetail Accessory System: Allows for rapid mounting and repositioning of cargo without disturbing existing loads.
• Rugged Construction: Fully welded extruded aluminum beams with rigid internal bracing provide exceptional strength without the need for additional crossbars.
• Integrated Wiring: Designed with internal channels to cleanly route electrical wiring for light bars and accessories.
• Premium Finish: Protected by an Integrit textured black powder-coat for superior corrosion and UV resistance.
• Complete Kit: Includes BASE Rack tray, Land Cruiser mounting hardware, and wind deflector for a ready-to-fit installation.
• Manufacturer Part Number: BASE11

Designed for the ARB Classic Series II Fridge Freezer, this genuine replacement thermistor (MPN: 10910027) is a critical sensor for maintaining accurate internal temperatures. It serves as the primary feedback loop for the cooling system, signaling the compressor to cycle on or off based on your set temperature.

Over time, original thermistors can wear or suffer from moisture ingress, leading to erratic temperature readings or a failure to cool. This high-precision sensor restores reliable performance and prevents the common issue of the fridge freezing items or failing to reach its target temperature.

• Genuine ARB replacement part specifically for Classic Series II units
• Ensures accurate temperature regulation and compressor efficiency
• Direct-fit connector for straightforward installation
• Manufacturer Part Number: 10910027

The ARB Zero Fridge Freezer Tie Down Kit (MPN: 10900046) provides a robust mounting solution to secure your portable fridge during off-road transit. This system is engineered for both semi-permanent and temporary setups, preventing fridge movement on uneven terrain while maintaining easy access.

The kit features a durable stainless steel bracket system that attaches directly to the factory provisions located beneath the fridge handles. The lower mounting brackets are designed for maximum versatility, allowing you to bolt them directly to an ARB Zero Fridge Slide or any flat, hard surface in your vehicle's cargo area. This configuration ensures a low-profile, high-strength connection that resists vibration and corrosion.

• Designed specifically for ARB Zero Fridge Freezer models
• Heavy-duty stainless steel bracket construction for corrosion resistance
• Direct handle-mount system preserves fridge portability
• Mounts to ARB Zero Fridge Slides or any solid flat surface
• Includes all necessary brackets and hardware for installation
• Manufacturer Part Number: 10900046

Engineered for exposure to the harshest outdoor conditions, the ARB Elements Weatherproof Fridge Freezer (10810602) is a 63-quart portable cooling solution designed for open-air installation in pickup beds and cargo areas. Unlike standard portable fridges, the Elements series features a 304-grade stainless steel body and weatherproof control panel to withstand rain, dust, and UV exposure without the need for a protective cover.

This unit addresses common overlanding challenges with a unique infinite-position gas strut that holds the lid open at any angle, making it easier to access contents in tight spaces or under canopy windows. For security, it includes a touchpad electronic locking system and tamper-proof cast stainless steel hinges that allow for permanent mounting to your vehicle's fridge slide or floor.

• Main body and lid constructed from 304-grade stainless steel for maximum corrosion resistance
• Strong ASA protective corner moldings on the body and lid
• Infinite position gas strut holds the lid open in any position
• Heavy-duty tamper-proof cast stainless steel hinges and anodized aluminum latches
• Weatherproof control panel with recessed rear AC/DC power sockets
• Concealed front and rear carry handles for a snag-free exterior
• Recessed rear remote monitor transmitter for easy temperature tracking
• Manufacturer Part Number: 10810602

The ARB Pinnacle Camp Table (10500171) provides a stable, generously sized workspace for cooking, dining, and gear organization at the campsite. Constructed with a durable black aluminum frame and contrasting charcoal crossbars, this table is engineered to withstand the rigors of overlanding and off-road travel.

Functionality is prioritized with a rugged 44.9-inch by 27.5-inch tabletop and legs that adjust independently from 31 to 39 inches in height, ensuring a level surface on uneven terrain. Integrated brackets support an included mesh storage basket for keeping essentials off the ground, while the entire unit packs into a heavy-duty 600D polyester carry bag with an internal divider to protect the finish during transport.

• Independently adjustable legs for precise leveling on uneven surfaces
• Overall height adjustable from 31in to 39in
• Generous 44.9in x 27.5in tabletop surface area
• Lightweight and durable black aluminum frame with charcoal crossbars
• Integrated brackets for the included under-table mesh storage basket
• Protective 600D polyester carry bag with internal divider included
• Manufacturer Part Number: 10500171

Fits select 2024-2025 Lexus GX550 and Toyota Land Cruiser models.

The ARB BASE Rack (MPN 1770010) is a low-profile, fully-welded roof storage solution engineered for maximum versatility and structural integrity. Measuring 72in x 45in, this rack is constructed from extruded aluminum with internal bracing, providing a rigid platform that resists flexing under load without the need for a supporting subframe. Its unique dovetail mounting extrusion runs the full perimeter and along each internal beam, allowing for rapid, debris-free attachment of cargo and accessories.

Unlike traditional T-slot channels that collect dust and grime, the side-facing dovetail system allows for quick repositioning of items like recovery boards, Hi-Lift jacks, and custom light bars using simple clamp mounts. The entire assembly is finished in a durable Integrit textured black powder coat for long-lasting corrosion resistance in harsh environments.

• Dimensions: 72in x 45in
• Material: Fully-welded extruded aluminum with internal bracing
• Finish: Integrit Textured Black Powder-Coat
• Mounting System: Perimeter and internal dovetail extrusions
• Manufacturer Part Number: 1770010
• Design: Cross-beam platform for versatile cargo loading

The ARB Nacho Nano BASE Rack Corner Cap 4-Light Kit (V5AR2) provides a seamless area lighting solution by integrating high-output LEDs directly into the corners of your rack system. This kit replaces the factory plastic corner caps with adjustable, dual-branded cast aluminum housings, freeing up valuable T-slot real estate while providing 360-degree illumination for recovery, camping, or the job site.

Equipped with four NANO lights, the system delivers over 2,100 lumens of focused white light to the vehicle's immediate perimeter. Built for the rigors of off-roading, the cast aluminum caps feature a corrosion-resistant finish for long-term durability. The kit is designed for a straightforward installation, including a comprehensive 4-light wiring harness and a 15-foot extension for easy routing to your power source.

• Replaces factory ARB Base Rack corner caps to maximize rack space
• Includes 4 Nacho NANO lights with over 2,100 lumens of output
• Cast aluminum construction with corrosion-resistant finish
• Includes full 4-light rack harness and 15-foot extension harness
• Complete hardware kit included for installation
• Manufacturer Part Number: V5AR2

Fits select 1990-1997 Toyota Land Cruiser and Lexus LX450 models without reverse sensors.

The ARB Summit Rear Bumper (5611210) provides a heavy-duty solution for rear-end protection and recovery. Engineered with a tubular steel subframe and finished in a durable textured black powder coat, this bumper is designed specifically to maintain optimal ground clearance and departure angles during technical off-road maneuvers. It combines chassis-mounted strength with an integrated 3500kg-rated tow hitch, making it a dual-purpose upgrade for overlanding and towing.

This bumper is highly configurable and includes provisions for mounting an ARB air compressor, trailer camera wiring, a 50-amp Anderson plug, and standard trailer plug wiring. For recovery situations, it features four accessible ARB Jack and Hi-Lift jack points. Please note that this bumper is designed for vehicles with fender flares and requires the installation of ARB wheel carriers, jerry can holders, or cover panels (sold separately) to complete the assembly.

• Manufacturer Part Number: 5611210
• Construction: High-strength steel subframe
• Finish: Textured black powder coat
• Tow Rating: 3500kg
• Compatibility: 80 Series Land Cruiser and LX450 (without sensors)
• Features: Integrated hitch, jack points, and compressor mounting provisions

The ARB BASE Rack Hi-Lift Jack Holder (1780280) provides a secure, streamlined mounting solution for high-lift or farm-style jacks. Designed specifically for the ARB BASE Rack system, this holder utilizes the rack's unique dovetail extrusion, allowing you to clamp the mount anywhere along the internal beams or the outer perimeter without disturbing the rest of your cargo. Unlike traditional T-slot channels, this dovetail mounting system prevents the accumulation of dust and debris for cleaner, more reliable operation in off-road environments.

• Fits ARB BASE Rack systems via the integrated dovetail track
• Constructed from high-strength, corrosion-resistant steel for long-term durability
• Premium cradle and clip design ensures the jack remains stable over rough terrain
• Integrated padlock provision for added security against theft
• Easy installation and repositioning without requiring disassembly of other accessories
• Manufacturer Part Number: 1780280

The ARB BASE Rack (1770070) is a modular, low-profile roof rack system engineered for maximum cargo versatility and streamlined accessory integration. Measuring 49in x 51in, this cabrack features a unique dovetail extrusion around the full perimeter and along each internal beam. This design allows for rapid, secure attachment of accessories without the need for traditional T-slots that often trap dirt and debris.

Built from high-strength extruded aluminum with rigid internal bracing, the BASE Rack is fully welded to provide superior structural integrity without the weight or complexity of additional cross bars. The Integrit textured black powder-coat finish provides a durable, corrosion-resistant surface suitable for harsh off-road environments. Note: Vehicle-specific mounting brackets are required for installation and are sold separately.

• Dimensions: 49in x 51in (1255mm x 1285mm)
• Material: Extruded aluminum with internal bracing
• Finish: Integrit textured black powder-coat
• Attachment System: Dovetail extrusion for one-handed accessory mounting
• Wiring: Internal provisions for concealed cable routing
• Construction: Fully welded assembly (excluding UV-stable corner caps)
• Manufacturer Part Number: 1770070

Fits select 1979-1994 Toyota Pickup and 1984-1985 Toyota 4Runner.

Properly maintaining Old Man Emu leaf spring bushings is critical for long-term suspension performance and longevity. The ARB Old Man Emu Greasable Shackle Kit (OMEGS4) simplifies this maintenance by allowing you to lubricate the bushings through integrated grease nipples. This design eliminates the need to remove the shackles for service, significantly reducing the time and effort required to keep your leaf springs operating smoothly.

• Integrated grease nipples allow for lubrication without shackle disassembly
• Side plates are zinc-plated to provide a durable barrier against corrosion
• Facilitates periodic lubrication to extend the life of OME leaf spring bushings
• Designed for front suspension fitment
• Includes all necessary hardware for the shackle assembly
• Manufacturer Part Number: OMEGS4