Fits 2014-2018 Audi RS7 Base and Performance models (4.0T).

The AWE S-FLO Carbon Intake V2 is a precision-engineered induction solution designed to optimize airflow for the Audi RS7’s 4.0T engine. This redesigned intake features full carbon fiber construction with smooth internal transitions from the grille inlet to the turbo inlets. Utilizing a unique "floating" construction, the airbox integrates with factory accordion turbo couplers to allow for natural engine movement under high-torque conditions, preventing stress or cracking of the carbon components.

This system includes an integrated honeycomb-meshed port on the top of the airbox to ensure consistent air volume even at elevated boost levels. The package comes complete with the washable, high-flow AWE S-FLO Filter, which provides a more aggressive intake note and audible turbo spool while maintaining factory mounting points for a guaranteed perfect fitment.

• Manufacturer Part Number: 2660-15012
• Material: UV-stabilized resin and clear-coated carbon fiber
• Performance Gains: Max gains of 32 hp and 50 lb-ft of torque (Stage 2 software)
• Stock Software Gains: 15 hp and 27 lb-ft of torque
• Filter Type: Durable, washable S-FLO high-flow filter
• Compliance: California Air Resources Board Executive Order #D-832
• Installation: Retains stock mounting locations; no Check Engine Light (CEL) guaranteed

Fits select 2012-2018 BMW 228i, 320i, 328i, and 428i models.

The AWE S-FLO Carbon Intake replaces the restrictive factory airbox with a fully enclosed, high-flow system designed to unlock significant power gains. Constructed from high-grade 2x2 twill carbon fiber, this intake features a UV-stabilized resin and clear coat to prevent yellowing under intense engine bay heat. This system is engineered to provide a direct bolt-on installation, mating perfectly with factory air inlet pipes and mounting locations while maintaining plug-and-play compatibility for the MAF sensor and breather locations.

By optimizing the intake path and removing the factory silencer via an included carbon fiber turbo inlet pipe, the S-FLO system delivers an aggressive intake note and enhanced turbo spool sound. The heart of the system is the washable S-FLO Filter, which maximizes airflow to produce impressive maximum gains of 16hp and 17ft-lbs of torque at the crank.

• Max gains of 16hp and 17ft-lbs of torque at the crank
• UV-stabilized 2x2 twill carbon fiber prevents heat-related yellowing
• Includes carbon fiber turbo inlet pipe to remove factory silencer
• Fully enclosed carbon fiber box protects against engine heat soak
• Includes high-flow, washable AWE S-FLO Filter
• Guaranteed Check Engine Light (CEL) free operation
• Direct fitment using factory mounting points
• Manufacturer Part Number: 2660-13034
• Note: For racing use only

Fits 2008-2012 Audi S5 Base and Cabriolet (4.2L).

The AWE S-FLO Carbon Intake is a precision-engineered induction solution designed to optimize airflow while maintaining low intake temperatures. By utilizing a fully enclosed 2x2 twill carbon fiber cover, the system draws cool ambient ram-air from the factory inlet, shielding the intake path from power-robbing engine bay heat. This configuration delivers a 34% increase in airflow over the stock airbox, resulting in maximum gains of 11 hp and 9 ft-lbs of torque at the crank.

Built for durability and performance, the S-FLO system features a high-flow, 4-ply Nomex-reinforced silicone air tube. This tube is fluorosilicone-lined and reinforced with steel wire to prevent collapsing under high vacuum. The kit includes a washable S-FLO dry media filter, providing high-performance filtration without the need for oiling. The entire assembly integrates perfectly with the OEM air inlet and mounts to factory locations for a clean, professional installation.

• 2x2 twill carbon fiber cover with UV-stabilized resin clear coat
• 4-ply Nomex, fluorosilicone-lined, steel wire reinforced silicone air tube
• Washable dry media S-FLO Filter
• Delivers 34% more airflow than the factory intake
• Max gains of 11 hp and 9 ft-lbs of torque at the crank
• Manufacturer Part Number: 2660-13032

What's Included: S-FLO Carbon Cover, S-FLO Intake tube, S-FLO Filter, and all necessary brackets and mounting hardware.

Fits 2008-2012 Audi S5 (4.2L) Base and Cabriolet models.

The AWE S-FLO Carbon Intake is engineered to optimize induction efficiency while shielding the intake charge from engine bay heat. By utilizing a fully enclosed 2x2 twill carbon fiber cover, the system draws cool ambient ram-air directly from the factory inlet. This configuration achieves a 34% increase in airflow over the stock airbox, resulting in verified gains of up to 11 hp and 9 ft-lbs of torque at the crank.

The assembly features a high-performance 4-ply Nomex® reinforced silicon air tube. This tube is fluorosilicone-lined and steel wire-reinforced to prevent collapsing under vacuum while maintaining a smooth internal bore for maximum velocity. Included is the washable, dry media S-FLO Filter, which provides superior filtration and airflow without the risk of oil-fouling sensitive mass airflow sensors.

• Direct-fit integration with OEM mounting points and air inlet
• 2x2 twill carbon fiber cover with UV-stabilized resin clear coat
• High-flow 4-ply Nomex® and fluorosilicone-lined silicon air tube
• Measured airflow increase of 34% over the factory system
• Performance gains: +11 hp and +9 ft-lbs of torque at the crank
• Washable dry media S-FLO filter for long-term serviceability
• Manufacturer Part Number: 2660-13018

What's Included: S-FLO Carbon Cover, S-FLO Intake Tube, S-FLO Filter, and all necessary brackets and mounting hardware.

Fits 2013-2017 Audi S4 and S5 models (3.0T).

The AWE S-FLO Intake provides a significant performance upgrade for the Audi B8.5 3.0T platform by replacing restrictive factory components with high-flow alternatives. This system combines the washable S-FLO Filter with a high-performance silicon air tube, engineered to maintain optimal flow geometry from the inlet to the outlet. By utilizing the factory airbox, the system maintains a perfect seal while delivering the same power gains as full carbon fiber intake systems.

The included air tube is constructed from 4-ply Nomex® reinforced silicon, featuring a fluorosilicone lining for chemical resistance and integrated steel wire reinforcement to prevent tube collapse under high vacuum. This combination results in a 34% increase in airflow over the stock setup, yielding verified maximum gains of up to 15 hp and 11 lb-ft of torque at the crank.

• 4-ply Nomex® reinforced, fluorosilicone-lined silicon air tube
• Steel wire reinforcement prevents suction-induced collapse
• Washable, dry media S-FLO Filter included
• Increases airflow by 34% over factory intake
• Maximum gains of 15 hp and 11 lb-ft of torque at the crank
• Direct fitment to OEM airbox with custom molded lip for a perfect seal
• AWE No CEL (Check Engine Light) Guarantee
• Manufacturer Part Number: 2660-13010

Fits 2019-2026 Audi RS3 and TT RS models. The AWE Tuning DV Adapter Kit is an essential component for installing the AWE 4.5" S-FLO Carbon Intake Suite on newer 2.5T engines. As the factory diverter valve configuration changed for 2019+ models, this adapter provides the necessary bypass routing to ensure proper fitment and performance of your aftermarket intake system.

Each adapter is CNC-machined in-house from billet 6061 aluminum for maximum durability and precise tolerances. The kit is engineered for the high-heat environment of the RS3 and TT RS engine bays, utilizing specialized silicone and oil-resistant seals to prevent leaks and maintain boost pressure integrity.

• Material: CNC-machined billet 6061 aluminum construction
• Silicone: 8.75" of high-temperature silicone hose
• Hardware: Includes two oil-resistant o-rings and two stainless steel worm-drive clamps
• Requirement: Necessary for 2019+ Audi RS3/TT RS models running the AWE S-FLO intake
• MPN: 2660-11020

Note: The AWE 4.5" S-FLO Carbon Intake Suite is designed for racing use only.

Fits select 1997-2002 Audi A4, A4 Quattro, S4, A6 Quattro, and Volkswagen Passat models. This AWE Tuning Drivetrain Stabilizer (DTS) Rubber Mount Package is a direct replacement or upgrade for vehicles equipped with an AWE DTS bar. It is specifically designed for owners who need to refresh a worn bushing or those currently running a polyurethane mount who wish to reduce cabin vibration and harshness.

By utilizing a high-durometer rubber mount instead of polyurethane, this package maintains the structural integrity and drivetrain alignment provided by the DTS bar while offering superior dampening of drivetrain harmonics. This ensures power is delivered efficiently to the ground without the excessive noise, vibration, and harshness (NVH) often associated with rigid poly mounts.

• Manufacturer Part Number: 2210-11016
• Mount Material: High-quality rubber for optimized NVH reduction
• Application: Replacement or swap-out for AWE Tuning DTS bars
• Includes all necessary hardware for a complete mount replacement
• Direct fit to existing AWE DTS mounting points

Fits select 2013-2020 Audi S3, S6, S7, and SQ5, Ford Focus RS and Mustang Shelby GT350, and Volkswagen Golf R.

The AWE SwitchPath Remote (MPN 1325-11012) provides total manual control over your vehicle's exhaust valve position from inside the cabin. Designed to override factory valve logic, this kit allows you to toggle between open and closed modes at the touch of a button, regardless of throttle position or drive mode. Whether you are using a factory exhaust system or an AWE SwitchPath Exhaust, this controller gives you immediate command over your vehicle's acoustic profile.

The system is easy to operate with a dedicated "On" button to open the valves and an "Off" button to close them. Note that when installed, this controller overrides the ECU’s valve commands, meaning the valves will remain in the state last selected via the remote until manually changed.

• Complete Kit: Includes two compact remotes, a custom wiring harness, a control box, and all necessary mounting hardware.
• Versatile Compatibility: Functions with both OE factory valved exhausts and AWE SwitchPath series exhausts.
• Ergonomic Remotes: Compact design fits easily on a keychain or stores within a cup holder.
• Manual Override: Provides full-time valve control, bypassing the stock ECU-controlled valve behavior for a customized driving experience.
• Manufacturer Part Number: 1325-11012

Fits select 2014-2023 Chevrolet Camaro (SS, ZL1) and 2014-2019 Chevrolet Corvette (Stingray, Grand Sport, Z06, ZR1) models with the 6.2L engine.

AWE Tuning AFM Valve Simulators provide a precision-engineered solution for drivers equipping their vehicles with full AWE cat-back exhaust systems. When installing an exhaust that removes the factory Active Fuel Management (AFM) valve route, these simulators prevent the ECU from triggering a Check Engine Light (CEL). By simply transferring the factory AFM valve motors to these CNC laser-cut plates, the system retains factory electronic operation while the motors are safely secured away from the exhaust path.

• CNC laser-cut T304 stainless steel construction for long-term durability
• Prevents AFM-related Check Engine Lights (CEL) by maintaining factory motor operation
• Direct bolt-on installation to factory AFM valve motors
• Requires the use of factory valve motor hardware
• Includes a set of two (2) simulators
• AWE Lifetime Warranty and No CEL Guarantee
• Manufacturer Part Number: 1310-11032

Fits 2016-2024 Chevrolet Camaro SS (6.2L).

AWE AFM Valve Simulators provide a reliable solution for drivers installing aftermarket cat-back exhausts that do not accommodate factory Active Fuel Management (AFM) valves. By mounting the electronic valve motors to these simulator plates rather than leaving them disconnected, you prevent the ECU from triggering a Check Engine Light (CEL) or entering a limp mode. The motors retain their factory electrical operation and movement while being safely secured out of the exhaust flow.

• Prevents CEL (Check Engine Light) when removing factory AFM valves
• CNC laser-cut T304 stainless steel construction for maximum durability
• Direct bolt-on compatibility with factory AFM valve motors
• Maintains factory ECU functionality and motor operation
• Requires use of factory valve motor hardware for installation
• Includes two (2) simulator plates
• Manufacturer Part Number: 1310-11030
• AWE Lifetime Warranty and No CEL Guarantee

Fits 2018-2023 Ford Mustang GT, GT Premium, and Bullitt models equipped with the factory Active Valve Performance Exhaust.

The AWE Valve Motor Bracket is a precision-engineered solution for owners upgrading to an AWE exhaust system who need to maintain factory electronic integration. When installing aftermarket exhaust components, the factory valve actuators must remain connected to the vehicle harness to prevent the ECU from triggering a Check Engine Light (CEL). This bracket provides a secure, direct bolt-on mounting point for those factory-issued actuators, simulating the physical resistance and presence required for CEL-free operation.

• Prevents Check Engine Lights (CEL) by maintaining factory actuator connection
• Direct bolt-on installation using factory mounting points
• Ensures seamless ECU communication for Active Valve Performance Exhaust models
• Durable construction designed for long-term heat cycling
• Must be used in conjunction with AWE exhaust systems
• Manufacturer Part Number: 1310-11022

Fits select 2013-2024 Audi (S3, S6, S7, SQ5), BMW (M3, M4), Mercedes-Benz (C43, C63/S AMG), Porsche (Macan), and Volkswagen (Golf R).

Eliminate ECU soft codes caused by the removal of factory exhaust valves with AWE Tuning Electronic Valve Simulators. When factory exhaust valves are deleted—often during the installation of a high-performance aftermarket exhaust—the vehicle's ECU typically triggers a "soft code." While these codes often don't trigger a Check Engine Light (CEL), they are stored in the system and can be seen during diagnostics.

These AWE simulators are a simple, hardware-based solution. They plug directly into the factory wiring harness in place of the original valve motors, providing the necessary signal to keep the ECU functioning as if the valves were still present. The installation is completely plug-and-play with no wiring or splicing required.

• Prevents ECU soft codes when exhaust valves are removed
• Direct-fit, plug-and-play installation into factory harness
• Maintains system integrity without interfering with other engine functions
• Includes two (2) electronic simulators per unit
• Manufacturer Part Number: 1310-11018

Fits 2019-2024 Porsche 911 Coupe and Targa models (992), including Carrera, Targa, Turbo, and Dakar variants.

Eliminate the disruptive wind buffeting—that rhythmic air pressure thumping—commonly experienced when driving the Porsche 992 with the windows down. The AWE Foiler Wind Diffuser is a precision-engineered solution designed to redirect airflow away from the cabin, allowing for comfortable high-speed driving on both the street and the track.

Each diffuser is crafted from UV-stabilized injection-molded plastic to match the factory trim for an OE-level aesthetic. The Foiler replaces the stock trim piece using factory mounting points and original hardware, ensuring a secure fit without the need for messy adhesives or permanent modifications.

• Significantly reduces wind buffeting during single-window down driving
• UV-stabilized injection-molded construction for long-term durability
• Matches factory trim finish for an integrated, professional look
• Utilizes factory mounting points and hardware for a simple installation
• Includes both driver and passenger side diffusers
• Fits 992-generation Coupe and Targa models
• Manufacturer Part Number: 1110-11017

Fits 2020-2026 Toyota GR Supra models including Base, Premium, Launch Edition, A91, and 45th Anniversary Edition.

Eliminate the aggressive wind buffeting common to the Toyota GR Supra when driving at speed with the windows down. The AWE Tuning Foiler Wind Diffuser was engineered specifically for the A90/A91 platform to solve cabin pressure resonance without introducing the "wind whistle" found in generic diffusers. Designed to look like a factory component, this kit provides a clean, unobtrusive solution for both street and track enthusiasts.

Constructed from UV-stabilized injection-molded plastic, these diffusers offer an OE-style aesthetic that integrates seamlessly with the existing mirror trim. Installation is straightforward and requires no tools, utilizing the included precision-cut adhesive for a secure bond that holds firm even at high speeds.

• Eliminates cabin wind buffeting at speeds up to 130 mph with windows up or down
• Bespoke design prevents high-speed "wind whistle" common with other designs
• UV-stabilized injection-molded construction for long-term durability and OE finish
• Recessed base design accommodates adhesive thickness for a flush, factory fit
• Simple stick-on installation using pre-applied die-cut adhesive
• Comes as a complete set of two (driver and passenger-side)
• Manufacturer Part Number: 1110-11012

Fits select 2013-2025 Porsche 911 (991), 718 Boxster/Cayman, and 981 Boxster/Cayman models.

The AWE Tuning Foiler Wind Diffuser is the engineered solution to the aggressive wind buffeting—or Helmholtz resonance—that occurs when driving late-model Porsches with a single window down. This resonance creates an uncomfortable pressure wave inside the cabin at higher speeds. The Foiler diffuses the airflow at the leading edge of the window, redirecting it to eliminate the buffeting effect while maintaining a clean, factory look.

Constructed from UV-stabilized injection-molded plastic, these diffusers are designed to withstand sun exposure and environmental wear without fading. The design is intentionally understated to complement Porsche’s factory styling. Installation is a precise bolt-on process using existing mounting points, requiring no permanent modifications to your vehicle.

• Eliminates wind buffeting for comfortable "single-window down" driving
• UV-stabilized injection-molded plastic for an OE-style finish and durability
• Track-tested and street-proven aerodynamic design
• Complete set includes driver and passenger side diffusers
• Simple, secure bolt-on installation with all necessary hardware included
• Manufacturer Part Number: 1110-11010