Fits select 2014-2026 BMW F and G chassis models with dual electronic exhaust valves, including M2, M3, M4, M5, M8, and X5/X6/X7 SAVs.

The Dinan Dual Exhaust Valve Remote Kit grants you complete manual control over your vehicle's acoustic profile. While factory exhaust valves are programmed to open and close based on complex ECU logic, RPM, and drive mode, this kit overrides those parameters. With the included wireless remote, you can fully open the valves for maximum exhaust note or close them for a quiet, neighbor-friendly cold start.

Built for the harsh environment of the vehicle undercarriage, the system features a weatherproof controller housing. The kit also includes extra-length wiring harnesses, providing the flexibility needed for clean routing and secure mounting regardless of your specific BMW chassis configuration.

• Overrides factory ECU control to manually open or close electronic exhaust valves
• Wirelessly controlled via an included two-button remote
• Weatherproof housing protects internal electronics from road debris and moisture
• Extra-length wiring harnesses for versatile routing and installation
• Directly compatible with BMW dual electronic valve systems
• Manufacturer Part Number: R660-0002

Fits 2025 Audi RS3 Base Sedan (8Y FL).

The Akrapovic Control Kit is a precision-engineered electronic component designed to give drivers full authority over the active exhaust valves of the 2025 Audi RS3 (8Y facelift). By integrating with the vehicle's electrical system, this kit allows for the manual management of the exhaust note, enabling you to switch between a more refined sound for cruising and the unrestricted, aggressive tone of the 2.5L turbocharged five-cylinder engine.

• Specifically calibrated for the 8Y facelift RS3 Sedan architecture
• Enables manual control over factory or Akrapovic exhaust valve positioning
• Maintains high-integrity signal communication with OE electronics
• Includes necessary wiring harness and control module for a complete installation

Fits 2023-2025 BMW M240i (G42) Base.

The Akrapovic Sound Kit provides drivers with total control over their vehicle's acoustic profile directly from the cockpit. This electronic upgrade allows you to switch between a discreet, quiet mode for daily commuting and a more aggressive, sporty sound for spirited driving. The system utilizes a wireless remote to communicate with a receiver that drives the actuators, opening or closing the valves at the rear of the exhaust system to bypass or engage internal muffling.

• Allows manual toggling between quiet and sporty exhaust profiles
• Includes wireless Sound Remote Controller for easy cockpit operation
• Regulates exhaust valve positioning via electronic actuators
• Designed for seamless integration with Akrapovic exhaust systems

Note: Installation of the Akrapovic Sound Kit renders the exhaust system's ECE type approval invalid. Images provided are for representation only.

Fits 2020-2024 Chevrolet Corvette Stingray.

When upgrading the exhaust system on your C8 Corvette, removing the factory Active Fuel Management (AFM) or NPP performance valves often triggers unwanted dashboard codes and check engine lights. MBRP valve simulators solve this issue by providing a direct electronic bypass that mimics the presence of the factory actuators.

Designed for enthusiasts performing a valve delete, these simulators are a complete plug-and-play solution. They plug directly into the factory wiring harness, ensuring the ECU receives the correct signal to prevent limp mode or error codes without the need for complex wiring modifications or custom tuning.

• Prevents dashboard codes and CELs during AFM or NPP valve deletes
• Direct plug-and-play installation into the factory wiring harness
• Eliminates the need for bulky factory actuators on aftermarket exhaust systems
• Sold as a pair to cover both exhaust valve circuits

Keep your exhaust cutout controls within reach with the QTP Wireless Remote Clip in Red. This genuine Quick Time Performance replacement component is engineered to securely hold your wireless remote fob, providing a reliable attachment point for your keychain, lanyard, or vehicle sun visor.

• Compatible with QTP wireless remote fobs
• High-visibility Red finish for easy identification
• Durable, snap-fit construction for secure retention
• Genuine replacement part for Quick Time Performance electronic exhaust systems
• Manufacturer Part Number: 10903

This clip is a direct replacement for lost or damaged fob clips, ensuring you never have to hunt for your remote when you want to adjust your exhaust note. Designed to withstand the rigors of daily use, it maintains a tight grip on the fob housing to prevent accidental loss.

Take full control over your vehicle's acoustic profile with the Remus Sound Controller, engineered specifically for the 2017 Honda Civic Type-R FK8 (2.0T). This electronic control unit integrates with Remus valved exhaust systems, allowing the driver to manually adjust valve positions to toggle between a subtle street presence and a more aggressive, race-inspired exhaust note.

Built to interface seamlessly with the FK8 chassis and K20C1 powerplant, this controller provides a reliable solution for enthusiasts seeking to customize their driving experience on the fly. Whether you are navigating neighborhood streets or pushing the limits on the track, the Remus Sound Controller puts the exhaust volume and character directly in your hands.

• Application: 2017 Honda Civic Type-R FK8 (2.0T)
• Manufacturer Part Number: STE 0005BT
• Function: Electronic valve modulation for adjustable exhaust sound profiles
• Compatibility: Designed for use with compatible Remus sport exhaust systems

Fits 2014 Mini Cooper S F55 (2.0L) models, excluding facelift versions.

The Remus STE 0003BT Sound Controller provides specialized electronic control over your vehicle's acoustic profile. Designed specifically for the turbocharged 2.0L Mini Cooper S F55, this module allows owners to manage exhaust valve behavior for a more customizable driving experience. This unit is an essential component for drivers looking to bridge the gap between a refined daily commute and a more aggressive, performance-oriented sound when the situation demands it.

• Manufacturer Part Number: STE 0003BT
• Engine Application: 2.0L Turbocharged
• Fitment Years: 2014 (Pre-facelift models)
• Chassis Code: F55
• Function: Electronic exhaust valve and sound management

The QTP QTEC Wireless One Touch Remote Controller (MPN 10901) offers precise, hands-free control over your QTEC electric exhaust cutouts. This system replaces the standard toggle switch with an automated "one touch" solution, allowing you to fully open or close your exhaust valves with a single press of a button rather than holding a switch until the cycle completes.

Designed for ease of installation and operation, this wireless kit eliminates the need to route wiring through the vehicle firewall or dash, maintaining a clean interior aesthetic. The receiver module provides a reliable signal for instant transition between a factory-quiet exhaust note and a wide-open performance sound.

• One-touch operation for automated full opening and closing cycles
• Compatible with all QTP QTEC electric cutout systems
• Wireless design eliminates the need for hardwired interior switches
• Includes compact receiver module and two key fob remote transmitters
• Manufacturer Part Number: 10901

The QTP QTEC Wireless Remote Controller (MPN: 10900) offers a streamlined solution for operating your Quick Time Performance electric exhaust cutouts without routing wires through the vehicle firewall. This kit replaces the standard toggle switch, allowing you to open, close, or partially adjust your exhaust tone at the touch of a button.

Designed for easy integration, the receiver module connects directly to your existing QTEC harness. This bolt-on wireless system is compatible with both single and dual cutout configurations, providing a clean installation and a convenient way to manage your vehicle's sound profile from inside or outside the cabin.

• Wireless operation for all QTEC electric cutout systems
• Includes two compact keychain remote transmitters
• Eliminates the need for cabin-mounted toggle switches and interior wiring
• Quick-connect integration with the factory QTEC harness
• Manufacturer Part Number: 10900

Fits select 2013-2020 Audi S3, S6, S7, and SQ5, Ford Focus RS and Mustang Shelby GT350, and Volkswagen Golf R.

The AWE SwitchPath Remote (MPN 1325-11012) provides total manual control over your vehicle's exhaust valve position from inside the cabin. Designed to override factory valve logic, this kit allows you to toggle between open and closed modes at the touch of a button, regardless of throttle position or drive mode. Whether you are using a factory exhaust system or an AWE SwitchPath Exhaust, this controller gives you immediate command over your vehicle's acoustic profile.

The system is easy to operate with a dedicated "On" button to open the valves and an "Off" button to close them. Note that when installed, this controller overrides the ECU’s valve commands, meaning the valves will remain in the state last selected via the remote until manually changed.

• Complete Kit: Includes two compact remotes, a custom wiring harness, a control box, and all necessary mounting hardware.
• Versatile Compatibility: Functions with both OE factory valved exhausts and AWE SwitchPath series exhausts.
• Ergonomic Remotes: Compact design fits easily on a keychain or stores within a cup holder.
• Manual Override: Provides full-time valve control, bypassing the stock ECU-controlled valve behavior for a customized driving experience.
• Manufacturer Part Number: 1325-11012

Fits select 2014-2023 Chevrolet Camaro (SS, ZL1) and 2014-2019 Chevrolet Corvette (Stingray, Grand Sport, Z06, ZR1) models with the 6.2L engine.

AWE Tuning AFM Valve Simulators provide a precision-engineered solution for drivers equipping their vehicles with full AWE cat-back exhaust systems. When installing an exhaust that removes the factory Active Fuel Management (AFM) valve route, these simulators prevent the ECU from triggering a Check Engine Light (CEL). By simply transferring the factory AFM valve motors to these CNC laser-cut plates, the system retains factory electronic operation while the motors are safely secured away from the exhaust path.

• CNC laser-cut T304 stainless steel construction for long-term durability
• Prevents AFM-related Check Engine Lights (CEL) by maintaining factory motor operation
• Direct bolt-on installation to factory AFM valve motors
• Requires the use of factory valve motor hardware
• Includes a set of two (2) simulators
• AWE Lifetime Warranty and No CEL Guarantee
• Manufacturer Part Number: 1310-11032

Fits 2016-2024 Chevrolet Camaro SS (6.2L).

AWE AFM Valve Simulators provide a reliable solution for drivers installing aftermarket cat-back exhausts that do not accommodate factory Active Fuel Management (AFM) valves. By mounting the electronic valve motors to these simulator plates rather than leaving them disconnected, you prevent the ECU from triggering a Check Engine Light (CEL) or entering a limp mode. The motors retain their factory electrical operation and movement while being safely secured out of the exhaust flow.

• Prevents CEL (Check Engine Light) when removing factory AFM valves
• CNC laser-cut T304 stainless steel construction for maximum durability
• Direct bolt-on compatibility with factory AFM valve motors
• Maintains factory ECU functionality and motor operation
• Requires use of factory valve motor hardware for installation
• Includes two (2) simulator plates
• Manufacturer Part Number: 1310-11030
• AWE Lifetime Warranty and No CEL Guarantee

Fits 2018-2023 Ford Mustang GT, GT Premium, and Bullitt models equipped with the factory Active Valve Performance Exhaust.

The AWE Valve Motor Bracket is a precision-engineered solution for owners upgrading to an AWE exhaust system who need to maintain factory electronic integration. When installing aftermarket exhaust components, the factory valve actuators must remain connected to the vehicle harness to prevent the ECU from triggering a Check Engine Light (CEL). This bracket provides a secure, direct bolt-on mounting point for those factory-issued actuators, simulating the physical resistance and presence required for CEL-free operation.

• Prevents Check Engine Lights (CEL) by maintaining factory actuator connection
• Direct bolt-on installation using factory mounting points
• Ensures seamless ECU communication for Active Valve Performance Exhaust models
• Durable construction designed for long-term heat cycling
• Must be used in conjunction with AWE exhaust systems
• Manufacturer Part Number: 1310-11022

Fits select 2013-2024 Audi (S3, S6, S7, SQ5), BMW (M3, M4), Mercedes-Benz (C43, C63/S AMG), Porsche (Macan), and Volkswagen (Golf R).

Eliminate ECU soft codes caused by the removal of factory exhaust valves with AWE Tuning Electronic Valve Simulators. When factory exhaust valves are deleted—often during the installation of a high-performance aftermarket exhaust—the vehicle's ECU typically triggers a "soft code." While these codes often don't trigger a Check Engine Light (CEL), they are stored in the system and can be seen during diagnostics.

These AWE simulators are a simple, hardware-based solution. They plug directly into the factory wiring harness in place of the original valve motors, providing the necessary signal to keep the ECU functioning as if the valves were still present. The installation is completely plug-and-play with no wiring or splicing required.

• Prevents ECU soft codes when exhaust valves are removed
• Direct-fit, plug-and-play installation into factory harness
• Maintains system integrity without interfering with other engine functions
• Includes two (2) electronic simulators per unit
• Manufacturer Part Number: 1310-11018

Fits 2024-2025 BMW X5 M and X6 M (F95/F96 LCI) facelift models equipped with compatible Akrapovic exhaust systems.

The Akrapovic Sound Kit (P-HF1549) gives drivers total control over their vehicle's acoustic signature directly from the cockpit. This system allows you to override the factory valve logic, enabling a seamless transition between a discreet quiet mode and a more aggressive, sportier exhaust note. The kit interfaces with the actuators that manage the valves at the rear of the exhaust system, providing on-demand sound customization.

• Precision Control: Effortlessly toggle valve positions using the included Sound Remote Controller or the dedicated smartphone app for iOS and Android.
• Integrated Hardware: Includes a receiver and all necessary electronics to drive the exhaust actuators.
• Plug-and-Play Functionality: Designed to work specifically with Akrapovic technology for reliable valve operation.
• Manufacturer Part Number: P-HF1549

Please note: Installation of the Akrapovic Sound Kit renders the ECE type approval for the exhaust system invalid.

Fits select 2021-2025 BMW M2, M3, and M4 models.

The Akrapovic Sound Kit gives you total control over your vehicle's exhaust acoustics directly from the cockpit. Designed to integrate with select Akrapovic exhaust systems, this kit allows drivers to toggle between a discreet, quiet mode for comfortable cruising and a more aggressive, sportier exhaust note for spirited driving. The system utilizes a specialized receiver to drive the actuators that operate the exhaust valves.

By regulating the valves at the end of the exhaust system, the Sound Kit provides a dual-personality driving experience. The included Sound Remote Controller offers a tactile, wireless interface to change the vehicle's sound profile instantly without leaving the driver's seat.

• Wireless Sound Remote Controller for immediate valve adjustment
• Electronic receiver module drives exhaust valve actuators
• Seamlessly switches between quiet and sport sound modes
• Designed specifically for Akrapovic exhaust system integration
• Manufacturer Part Number: P-HF1384

Fits 2020-2023 BMW X5 M and X6 M (F95/F96) models.

The Akrapovic P-HF1310 Sound Kit gives drivers total control over the acoustic character of their vehicle's exhaust system. This hardware and software solution allows for seamless switching between a more refined, quiet mode and the signature aggressive, sporty sound associated with Akrapovic systems. Using a receiver to drive the actuators that operate the exhaust valves, the kit enables the driver to adjust the sound profile directly from the cockpit.

Control is managed through the included Sound Remote Controller or via a smartphone app. Please be aware that the use of the optional Akrapovic Sound Kit renders the ECE type approval for the exhaust system invalid.

• Manufacturer Part Number: P-HF1310
• Included Components: Wireless receiver and Sound Remote Controller
• Valve Operation: Switchable between quiet and sport modes
• Compatibility: Specific to F95 and F96 chassis M-models

The Akrapovic Sound Kit (P-HF1284) provides drivers with complete control over the acoustic profile of their vehicle's exhaust system. Specifically engineered for the 2020 Audi RS Q8 (4M), this kit allows you to switch between a discrete, refined tone and the signature, aggressive Akrapovic sound directly from the driver's seat.

By interfacing with the exhaust valve actuators, this kit enables the user to bypass the factory valve logic, providing a more engaging auditory experience across the entire RPM range. Whether through the included remote controller or the smartphone app, the system ensures a seamless transition between sound modes.

• Fits 2020 Audi RS Q8 Base models.
• Enables manual override of exhaust valve settings via remote or smartphone app.
• Includes all necessary electronic control modules and wiring.
• Specifically developed for integration with Akrapovic exhaust systems.
• Manufacturer Part Number: P-HF1284.

Fits the 2021 Audi RS7 Sportback Base. The Akrapovic P-HF1282 Sound Kit provides drivers with active control over the vehicle's exhaust note, allowing for a seamless transition between a refined, subtle tone and the signature deep, aggressive sound of the Audi V8. This kit interfaces directly with the exhaust valves, giving you the ability to customize your driving experience from the cockpit.

Designed specifically for the C8 platform, the system includes a wireless receiver and a remote controller. This hardware enables manual override of the factory valve logic, ensuring you have the right soundtrack for every driving scenario. Whether cruising at highway speeds or pushing the RS7 on an open road, this kit ensures reliable, instant valve actuation without interfering with the vehicle's onboard diagnostics.

• Fits 2021 Audi RS7 Sportback (Base)
• Enables manual control over exhaust valve positioning
• Wireless remote controller included for easy operation
• Seamless integration with vehicle electronics
• Durable components designed for automotive heat and vibration cycles
• Manufacturer Part Number: P-HF1282

Fits 2018-2020 BMW M5 (F90) Base, Competition, and Edition 35 Years models (Excludes M5 CS).

The Akrapovic Sound Kit (P-HF1132) provides drivers with total control over their vehicle's acoustic profile. This system allows you to switch between a discrete exhaust note for daily driving and the signature deep, aggressive sound of an Akrapovic performance exhaust. By integrating directly with the vehicle's electronics, the kit uses a wireless remote or a smartphone app to actuate the exhaust valves, giving you on-demand sound management without compromising performance.

• Wireless remote control for easy valve operation
• Allows switching between quiet and performance sound modes
• Designed specifically for the F90 chassis electronics
• Compatible with factory or Akrapovic exhaust systems
• Manufacturer Part Number: P-HF1132